diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio')
7 files changed, 172 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index 4a896ff7edc5..a1e71c974e79 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -72,7 +72,7 @@ required: - reg - gpio-controller - "#gpio-cells" - - "brcm,gpio-bank-widths" + - brcm,gpio-bank-widths additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml new file mode 100644 index 000000000000..9e32e54aeb24 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton SGPIO controller + +maintainers: + - Jim LIU <JJLIU0@nuvoton.com> + +description: | + This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed + information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section. + Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595) + and a parallel to serial IC (HC165). + Clock is a division of the APB3 clock. + This interface has 4 pins (D_out , D_in, S_CLK, LDSH). + NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up + to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO. + GPIO pins can be programmed to support the following options + - Support interrupt option for each input port and various interrupt + sensitivity options (level-high, level-low, edge-high, edge-low) + - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines. + nuvoton,input-ngpios GPIO lines is only for GPI. + nuvoton,output-ngpios GPIO lines is only for GPO. + +properties: + compatible: + enum: + - nuvoton,npcm750-sgpio + - nuvoton,npcm845-sgpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nuvoton,input-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPI. + minimum: 0 + maximum: 64 + + nuvoton,output-ngpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The numbers of GPIO's exposed. GPIO lines are only for GPO. + minimum: 0 + maximum: 64 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - interrupts + - nuvoton,input-ngpios + - nuvoton,output-ngpios + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpio8: gpio@101000 { + compatible = "nuvoton,npcm750-sgpio"; + reg = <0x101000 0x200>; + clocks = <&clk NPCM7XX_CLK_APB3>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + nuvoton,input-ngpios = <64>; + nuvoton,output-ngpios = <64>; + }; diff --git a/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml new file mode 100644 index 000000000000..dd768db37a98 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC GPIO controller + +maintainers: + - Tzuyi Chang <tychang@realtek.com> + +description: + The GPIO controller is designed for the Realtek DHC (Digital Home Center) + RTD series SoC family, which are high-definition media processor SoCs. + +properties: + compatible: + enum: + - realtek,rtd1295-misc-gpio + - realtek,rtd1295-iso-gpio + - realtek,rtd1315e-iso-gpio + - realtek,rtd1319-iso-gpio + - realtek,rtd1319d-iso-gpio + - realtek,rtd1395-iso-gpio + - realtek,rtd1619-iso-gpio + - realtek,rtd1619b-iso-gpio + + reg: + items: + - description: GPIO controller registers + - description: GPIO interrupt registers + + interrupts: + items: + - description: Interrupt number of the assert GPIO interrupt, which is + triggered when there is a rising edge. + - description: Interrupt number of the deassert GPIO interrupt, which is + triggered when there is a falling edge. + + gpio-ranges: true + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - gpio-ranges + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + gpio@100 { + compatible = "realtek,rtd1319d-iso-gpio"; + reg = <0x100 0x100>, + <0x0 0xb0>; + interrupt-parent = <&iso_irq_mux>; + interrupts = <19>, <20>; + gpio-ranges = <&pinctrl 0 0 82>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml index affd823c881d..d76987ce8e50 100644 --- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml @@ -41,6 +41,13 @@ properties: "#interrupt-cells": const: 2 +patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index eefe7b345286..ab2afc0e4153 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -65,6 +65,8 @@ patternProperties: minItems: 1 maxItems: 32 + gpio-ranges: true + ngpios: default: 32 minimum: 1 diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml index c1060e5fcef3..d3d8a2e143ed 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml @@ -126,7 +126,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - gpio@e000a000 { + gpio@a0020000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = <0xa0020000 0x10000>; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index 56143f1fe84a..bb93baa88879 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -12,7 +12,8 @@ description: PS_MODE). Every pin can be configured as input/output. maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: @@ -23,6 +24,8 @@ properties: "#gpio-cells": const: 2 + label: true + required: - compatible - gpio-controller @@ -37,6 +40,7 @@ examples: compatible = "xlnx,zynqmp-gpio-modepin"; gpio-controller; #gpio-cells = <2>; + label = "modepin"; }; }; |