diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt')
-rw-r--r-- | Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt | 60 |
1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt deleted file mode 100644 index e30e184f50c7..000000000000 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Freescale MXS DMA - -Required properties: -- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx" -- reg : Should contain registers location and length -- interrupts : Should contain the interrupt numbers of DMA channels. - If a channel is empty/reserved, 0 should be filled in place. -- #dma-cells : Must be <1>. The number cell specifies the channel ID. -- dma-channels : Number of channels supported by the DMA controller - -Optional properties: -- interrupt-names : Name of DMA channel interrupts - -Supported chips: -imx23, imx28. - -Examples: - -dma_apbh: dma-apbh@80004000 { - compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 0x2000>; - interrupts = <82 83 84 85 - 88 88 88 88 - 88 88 88 88 - 87 86 0 0>; - interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", - "gpmi0", "gmpi1", "gpmi2", "gmpi3", - "gpmi4", "gmpi5", "gpmi6", "gmpi7", - "hsadc", "lcdif", "empty", "empty"; - #dma-cells = <1>; - dma-channels = <16>; -}; - -dma_apbx: dma-apbx@80024000 { - compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 0x2000>; - interrupts = <78 79 66 0 - 80 81 68 69 - 70 71 72 73 - 74 75 76 77>; - interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty", - "saif0", "saif1", "i2c0", "i2c1", - "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", - "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; - #dma-cells = <1>; - dma-channels = <16>; -}; - -DMA clients connected to the MXS DMA controller must use the format -described in the dma.txt file. - -Examples: - -auart0: serial@8006a000 { - compatible = "fsl,imx28-auart", "fsl,imx23-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; -}; |