diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/panel')
14 files changed, 176 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt index bc6a0c858e23..bc6a0c858e23 100644 --- a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt new file mode 100644 index 000000000000..82caa7b65ae8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt @@ -0,0 +1,20 @@ +Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel + +Required properties: +- compatible: must be "feiyang,fy07024di26a30d" +- reg: DSI virtual channel used by that screen +- avdd-supply: analog regulator dc1 switch +- dvdd-supply: 3v3 digital regulator +- reset-gpios: a GPIO phandle for the reset pin + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt new file mode 100644 index 000000000000..e5ca4ccd55ed --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt @@ -0,0 +1,7 @@ +Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +Required properties: +- compatible: should be "innolux,ee101ia-01d" + +This binding is compatible with the lvds-panel binding, which is specified +in panel-lvds.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt index d0f55161579a..3ab8c7412cf6 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -12,7 +12,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "innolux,p079zca"; reg = <0>; power-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt index 595d9dfeffd3..d1cab3a8f0fb 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt @@ -13,7 +13,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "innolux,p079zca"; reg = <0>; avdd-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt index 164a5fa236da..cfefff688614 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt @@ -12,7 +12,7 @@ Optional properties: Example: &mipi_dsi { - panel { + panel@0 { compatible = "kingdisplay,kd097d04"; reg = <0>; power-supply = <...>; diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt new file mode 100644 index 000000000000..74ee7ea6b493 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt @@ -0,0 +1,12 @@ +LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "lemaker,bl035-rgb-002" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt b/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt new file mode 100644 index 000000000000..fc1e1b325e49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt @@ -0,0 +1,7 @@ +LG ACX467AKM-7 4.95" 1080×1920 LCD Panel + +Required properties: +- compatible: must be "lg,acx467akm-7" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt new file mode 100644 index 000000000000..e57883ccdf2f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt @@ -0,0 +1,12 @@ +OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel + +Required properties: +- compatible: shall be "osddisplays,osd070t1718-19ts" +- power-supply: see simple-panel.txt + +Optional properties: +- backlight: see simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. No other simple-panel properties than +the ones specified herein are valid. diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt new file mode 100644 index 000000000000..1639fb17a9f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt @@ -0,0 +1,14 @@ +PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "pda,91-00156-a0" +- power-supply: this panel requires a single power supply. A phandle to a +regulator needs to be specified here. Compatible with panel-common binding which +is specified in the panel-common.txt in this directory. +- backlight: this panel's backlight is controlled by an external backlight +controller. A phandle to this controller needs to be specified here. +Compatible with panel-common binding which is specified in the panel-common.txt +in this directory. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt new file mode 100644 index 000000000000..1b5763200cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt @@ -0,0 +1,18 @@ +Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel + +Required properties: +- compatible: should be "rocktech,jh057n00900" +- reg: DSI virtual channel of the peripheral +- reset-gpios: panel reset gpio +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml new file mode 100644 index 000000000000..0e7987f1cdb7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR X11) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ronbo RB070D30 DSI Display Panel + +maintainers: + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + const: ronbo,rb070d30 + + reg: + description: MIPI-DSI virtual channel + + power-gpios: + description: GPIO used for the power pin + maxItems: 1 + + reset-gpios: + description: GPIO used for the reset pin + maxItems: 1 + + shlr-gpios: + description: GPIO used for the shlr pin (horizontal flip) + maxItems: 1 + + updn-gpios: + description: GPIO used for the updn pin (vertical flip) + maxItems: 1 + + vcc-lcd-supply: + description: Power regulator + + backlight: + description: Backlight used by the panel + $ref: "/schemas/types.yaml#/definitions/phandle" + +required: + - compatible + - power-gpios + - reg + - reset-gpios + - shlr-gpios + - updn-gpios + - vcc-lcd-supply + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 000000000000..ccd17597f1f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt index ed34253d9fb1..898e06ecf4ef 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt +++ b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt @@ -6,6 +6,7 @@ Required properties: Optional properties: - label: a symbolic name for the panel +- backlight: phandle of the backlight device Required nodes: - Video port for DPI input @@ -21,6 +22,7 @@ lcd-panel: td028ttec1@0 { spi-cpha; label = "lcd"; + backlight = <&backlight>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; |