diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge')
73 files changed, 6536 insertions, 1409 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt deleted file mode 100644 index d3c2a4914ea2..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt +++ /dev/null @@ -1,50 +0,0 @@ -Analog Devices ADV7123 Video DAC --------------------------------- - -The ADV7123 is a digital-to-analog converter that outputs VGA signals from a -parallel video input. - -Required properties: - -- compatible: Should be "adi,adv7123" - -Optional properties: - -- psave-gpios: Power save control GPIO - -Required nodes: - -The ADV7123 has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DPI input -- Video port 1 for VGA output - - -Example -------- - - adv7123: encoder@0 { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7123_in: endpoint@0 { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - adv7123_out: endpoint@0 { - remote-endpoint = <&vga_connector_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt deleted file mode 100644 index 659523f538bf..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ /dev/null @@ -1,143 +0,0 @@ -Analog Devices ADV7511(W)/13/33/35 HDMI Encoders ------------------------------------------------- - -The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video -transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space -conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input -pixels, while the others support RGB interface. - -Required properties: - -- compatible: Should be one of: - "adi,adv7511" - "adi,adv7511w" - "adi,adv7513" - "adi,adv7533" - "adi,adv7535" - -- reg: I2C slave addresses - The ADV7511 internal registers are split into four pages exposed through - different I2C addresses, creating four register maps. Each map has it own - I2C address and acts as a standard slave device on the I2C bus. The main - address is mandatory, others are optional and revert to defaults if not - specified. - - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. -- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. -- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. -- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V - on the chip. -- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is - needed only for ADV7511. - -The following properties are required for ADV7533 and ADV7535: - -- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should - be one of 1, 2, 3 or 4. -- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. -- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. -- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be - either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535. - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. -- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the - internal timing generator. The chip will rely on the sync signals in the - DSI data lanes, rather than generate its own timings for HDMI output. -- clocks: from common clock binding: reference to the CEC clock. -- clock-names: from common clock binding: must be "cec". -- reg-names : Names of maps with programmable addresses. - It can contain any map needing a non-default address. - Possible maps names are : "main", "edid", "cec", "packet" - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the - remote endpoint phandle should be a reference to a valid mipi_dsi_host device - node. -- Video port 1 for the HDMI output -- Audio port 2 for the HDMI audio input - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - /* - * The EDID page will be accessible on address 0x66 on the I2C - * bus. All other maps continue to use their default addresses. - */ - reg = <0x39>, <0x66>; - reg-names = "main", "edid"; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - clocks = <&cec_clock>; - clock-names = "cec"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - - port@2 { - reg = <2>; - codec_endpoint: endpoint { - remote-endpoint = <&i2s0_cpu_endpoint>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml new file mode 100644 index 000000000000..5bbe81862c8f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7511/11W/13 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The ADV7511, ADV7511W and ADV7513 are HDMI audio and video + transmitters compatible with HDMI 1.4 and DVI 1.0. They support color + space conversion, S/PDIF, CEC and HDCP. The transmitter input is + parallel RGB or YUV data. + +properties: + compatible: + enum: + - adi,adv7511 + - adi,adv7511w + - adi,adv7513 + + reg: + description: | + I2C slave addresses. + + The ADV7511/11W/13 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + dvdd-3v-supply: + description: A 3.3V supply that powers up the DVDD_3V pin. + + bgvdd-supply: + description: A 1.8V supply that powers up the BGVDD pin. + + adi,input-depth: + description: Number of bits per color component at the input. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 10, 12 ] + + adi,input-colorspace: + description: Input color space. + enum: [ rgb, yuv422, yuv444 ] + + adi,input-clock: + description: | + Input clock type. + "1x": one clock cycle per pixel + "2x": two clock cycles per pixel + "dd": one clock cycle per pixel, data driven on both edges + enum: [ 1x, 2x, dd ] + + adi,clock-delay: + description: + Video data clock delay relative to the pixel clock, in ps + (-1200ps .. 1600 ps). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + adi,embedded-sync: + description: + If defined, the input uses synchronization signals embedded in the + data stream (similar to BT.656). + type: boolean + + adi,input-style: + description: + Input components arrangement variant as listed in the input + format tables in the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3 ] + + adi,input-justification: + description: Input bit justification. + enum: [ left, evenly, right ] + + ports: + description: + The ADV7511(W)/13 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: Video port for the RGB or YUV input. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +# adi,input-colorspace and adi,input-clock are required except in +# "rgb 1x" and "yuv444 1x" modes, in which case they must not be +# specified. +if: + not: + properties: + adi,input-colorspace: + contains: + enum: [ rgb, yuv444 ] + adi,input-clock: + contains: + const: 1x + +then: + required: + - adi,input-style + - adi,input-justification + +else: + properties: + adi,input-style: false + adi,input-justification: false + + +required: + - compatible + - reg + - ports + - adi,input-depth + - adi,input-colorspace + - adi,input-clock + - avdd-supply + - dvdd-supply + - pvdd-supply + - dvdd-3v-supply + - bgvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7511w: hdmi@39 { + compatible = "adi,adv7511w"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + dvdd-3v-supply = <&v3v3>; + bgvdd-supply = <&v1v8>; + + adi,input-depth = <8>; + adi,input-colorspace = "yuv422"; + adi,input-clock = "1x"; + + adi,input-style = <3>; + adi,input-justification = "right"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511w_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml new file mode 100644 index 000000000000..df20a3c9c744 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADV7533/35 HDMI Encoders + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +allOf: + - $ref: /schemas/sound/dai-common.yaml# + +description: | + The ADV7533 and ADV7535 are HDMI audio and video transmitters + compatible with HDMI 1.4 and DVI 1.0. They support color space + conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI. + +properties: + compatible: + enum: + - adi,adv7533 + - adi,adv7535 + + reg: + description: | + I2C slave addresses. + + The ADV7533/35 internal registers are split into four pages + exposed through different I2C addresses, creating four register + maps. Each map has it own I2C address and acts as a standard slave + device on the I2C bus. The main address is mandatory, others are + optional and revert to defaults if not specified. + minItems: 1 + maxItems: 4 + + reg-names: + description: + Names of maps with programmable addresses. It can contain any map + needing a non-default address. + minItems: 1 + items: + - const: main + - const: edid + - const: cec + - const: packet + + clocks: + description: Reference to the CEC clock. + maxItems: 1 + + clock-names: + const: cec + + interrupts: + maxItems: 1 + + pd-gpios: + description: GPIO connected to the power down signal. + maxItems: 1 + + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.8V supply that powers up the DVDD pin. + + pvdd-supply: + description: A 1.8V supply that powers up the PVDD pin. + + a2vdd-supply: + description: A 1.8V supply that powers up the A2VDD pin. + + v3p3-supply: + description: A 3.3V supply that powers up the V3P3 pin. + + v1p2-supply: + description: + A supply that powers up the V1P2 pin. It can be either 1.2V + or 1.8V for ADV7533 but only 1.8V for ADV7535. + + adi,disable-timing-generator: + description: + Disables the internal timing generator. The chip will rely on the + sync signals in the DSI data lanes, rather than generating its own + timings for HDMI output. + type: boolean + + adi,dsi-lanes: + description: Number of DSI data lanes connected to the DSI host. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 3, 4 ] + + "#sound-dai-cells": + const: 0 + + ports: + description: + The ADV7533/35 has two video ports and one audio port. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + description: + Video port for the DSI input. The remote endpoint phandle + should be a reference to a valid mipi_dsi_host_device. + $ref: /schemas/graph.yaml#/properties/port + + port@1: + description: Video port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + + port@2: + description: Audio port for the HDMI output. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - ports + - adi,dsi-lanes + - avdd-supply + - dvdd-supply + - pvdd-supply + - a2vdd-supply + - v3p3-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6500000>; + + adv7533: hdmi@39 { + compatible = "adi,adv7533"; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; + adi,dsi-lanes = <4>; + avdd-supply = <&v1v8>; + dvdd-supply = <&v1v8>; + pvdd-supply = <&v1v8>; + a2vdd-supply = <&v1v8>; + v3p3-supply = <&v3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml new file mode 100644 index 000000000000..a1ed1004651b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analogix Semiconductor, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) + +maintainers: + - Xin Ji <xji@analogixsemi.com> + +description: | + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter + designed for portable devices. + +properties: + compatible: + const: analogix,anx7625 + + reg: + maxItems: 1 + + interrupts: + description: used for interrupt pin B8. + maxItems: 1 + + enable-gpios: + description: used for power on chip control, POWER_EN pin D2. + maxItems: 1 + + reset-gpios: + description: used for reset chip control, RESET_N pin B7. + maxItems: 1 + + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY. + Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and + [Swing control] setting. + Registers 0~9, bit 3:0 is [Boost control], these bits control + post cursor manual, increase the [Boost control] to increase + Pre-emphasis value. + Registers 0~9, bit 6:4 is [Swing control], these bits control + swing manual, increase [Swing control] setting to add Vp-p value + for each Swing, Pre. + Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [R select control] and + [R Termination control] setting. + Registers 10~19, bit 4:0 is [R select control], these bits are + compensation manual, increase it can enhance IO driven strength + and Vp-p. + Registers 10~19, bit 5:6 is [R termination control], these bits + adjust 50ohm impedance of DP tx termination. 00:55 ohm, + 01:50 ohm(default), 10:45 ohm, 11:40 ohm. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY. + DP TX lane1 swing register setting same with lane0 + swing, please refer lane0-swing property description. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + bus-type: + enum: [7] + default: 1 + + data-lanes: true + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for panel or connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi2dp_bridge_in: port@0 { + reg = <0>; + anx7625_in: endpoint { + remote-endpoint = <&mipi_dsi>; + bus-type = <7>; + data-lanes = <0 1 2 3>; + }; + }; + + mipi2dp_bridge_out: port@1 { + reg = <1>; + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + aux-bus { + panel { + compatible = "innolux,n125hce-gn1"; + power-supply = <&pp3300_disp_x>; + backlight = <&backlight_lcd0>; + + port { + panel_in: endpoint { + remote-endpoint = <&anx7625_out>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000000..4509c496731b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Andrzej Hajda <andrzej.hajda@intel.com> + - Neil Armstrong <neil.armstrong@linaro.org> + - Robert Foss <robert.foss@linaro.org> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7816 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + deprecated: true + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + description: Regulator for 1.0V digital core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml new file mode 100644 index 000000000000..62f0521b0924 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix Display Port bridge + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: true + + clock-names: true + + phys: true + + phy-names: + const: dp + + force-hpd: + type: boolean + description: + Indicate driver need force hpd when hpd detect failed, this + is used for some eDP screen which don not have a hpd signal. + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port@0 + - port@1 + +required: + - reg + - interrupts + - clock-names + - clocks + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt deleted file mode 100644 index 027d76c27a41..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt +++ /dev/null @@ -1,51 +0,0 @@ -Analogix Display Port bridge bindings - -Required properties for dp-controller: - -compatible: - platform specific such as: - * "samsung,exynos5-dp" - * "rockchip,rk3288-dp" - * "rockchip,rk3399-edp" - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -force-hpd: - Indicate driver need force hpd when hpd detect failed, this - is used for some eDP screen which don't have hpd signal. - -hpd-gpios: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug detection - -port@[X]: SoC specific port nodes with endpoint definitions as defined - in Documentation/devicetree/bindings/media/video-interfaces.txt, - please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/display/exynos/exynos_dp.txt - * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt -------------------------------------------------------------------------------- - -Example: - - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index c21103869923..514f58852990 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analogix ANX6345 eDP Transmitter Device Tree Bindings +title: Analogix ANX6345 eDP Transmitter maintainers: - Torsten Duwe <duwe@lst.de> @@ -26,25 +26,23 @@ properties: description: GPIO connected to active low reset dvdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. dvdd25-supply: - maxItems: 1 description: Regulator for 2.5V digital core power. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVTTL input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). May be omitted if EDID works reliably. @@ -63,7 +61,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747fff6..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt deleted file mode 100644 index 525a4bfd8634..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ /dev/null @@ -1,112 +0,0 @@ -Cadence DSI bridge -================== - -The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes. - -Required properties: -- compatible: should be set to "cdns,dsi". -- reg: physical base address and length of the controller's registers. -- interrupts: interrupt line connected to the DSI bridge. -- clocks: DSI bridge clocks. -- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk". -- phys: phandle link to the MIPI D-PHY controller. -- phy-names: must contain "dphy". -- #address-cells: must be set to 1. -- #size-cells: must be set to 0. - -Optional properties: -- resets: DSI reset lines. -- reset-names: can contain "dsi_p_rst". - -Required subnodes: -- ports: Ports as described in Documentation/devicetree/bindings/graph.txt. - 2 ports are available: - * port 0: this port is only needed if some of your DSI devices are - controlled through an external bus like I2C or SPI. Can have at - most 4 endpoints. The endpoint number is directly encoding the - DSI virtual channel used by this device. - * port 1: represents the DPI input. - Other ports will be added later to support the new kind of inputs. - -- one subnode per DSI device connected on the DSI bus. Each DSI device should - contain a reg property encoding its virtual channel. - -Example: - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy0>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - - panel: dsi-dev@0 { - compatible = "<vendor,panel>"; - reg = <0>; - }; - }; - -or - - dsi0: dsi@fd0c0000 { - compatible = "cdns,dsi"; - reg = <0x0 0xfd0c0000 0x0 0x1000>; - clocks = <&pclk>, <&sysclk>; - clock-names = "dsi_p_clk", "dsi_sys_clk"; - interrupts = <1>; - phys = <&dphy1>; - phy-names = "dphy"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - dsi0_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&dsi_panel_input>; - }; - }; - - port@1 { - reg = <1>; - dsi0_dpi_input: endpoint { - remote-endpoint = <&xxx_dpi_output>; - }; - }; - }; - }; - - i2c@xxx { - panel: panel@59 { - compatible = "<vendor,panel>"; - reg = <0x59>; - - port { - dsi_panel_input: endpoint { - remote-endpoint = <&dsi0_output>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml new file mode 100644 index 000000000000..23060324d16e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DSI bridge + +maintainers: + - Boris Brezillon <boris.brezillon@bootlin.com> + +description: | + CDNS DSI is a bridge device which converts DPI to DSI + +properties: + compatible: + enum: + - cdns,dsi + - ti,j721e-dsi + + reg: + minItems: 1 + items: + - description: + Register block for controller's registers. + - description: + Register block for wrapper settings registers in case of TI J7 SoCs. + + clocks: + items: + - description: PSM clock, used by the IP + - description: sys clock, used by the IP + + clock-names: + items: + - const: dsi_p_clk + - const: dsi_sys_clk + + phys: + maxItems: 1 + + phy-names: + const: dphy + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: dsi_p_rst + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DSI output. It can have + at most 4 endpoints. The endpoint number is directly encoding + the DSI virtual channel used by this device. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port representing the DPI input. + + required: + - port@1 + +allOf: + - $ref: ../dsi-controller.yaml# + + - if: + properties: + compatible: + contains: + const: ti,j721e-dsi + then: + properties: + reg: + minItems: 2 + maxItems: 2 + power-domains: + maxItems: 1 + else: + properties: + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - ports + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy0>; + phy-names = "dphy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + + panel@0 { + compatible = "panasonic,vvx10f034n00"; + reg = <0>; + power-supply = <&vcc_lcd_reg>; + }; + }; + }; + + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + dsi@fd0c0000 { + compatible = "cdns,dsi"; + reg = <0x0 0xfd0c0000 0x0 0x1000>; + clocks = <&pclk>, <&sysclk>; + clock-names = "dsi_p_clk", "dsi_sys_clk"; + interrupts = <1>; + phys = <&dphy1>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_panel_input>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml new file mode 100644 index 000000000000..c2b369456e4e --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MHDP8546 bridge + +maintainers: + - Swapnil Jakhade <sjakhade@cadence.com> + - Yuti Amonkar <yamonkar@cadence.com> + +properties: + compatible: + enum: + - cdns,mhdp8546 + - ti,j721e-mhdp8546 + + reg: + minItems: 1 + items: + - description: + Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P). + The AUX and PMA registers are not part of this range, they are instead + included in the associated PHY. + - description: + Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs. + - description: + Register block of mhdptx sapb registers. + + reg-names: + minItems: 1 + items: + - const: mhdptx + - const: j721e-intg + - const: mhdptx-sapb + + clocks: + maxItems: 1 + description: + DP bridge clock, used by the IP to know how to translate a number of + clock cycles into a time (which is used to comply with DP standard timings + and delays). + + phys: + maxItems: 1 + description: + phandle to the DisplayPort PHY. + + phy-names: + items: + - const: dpphy + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + First input port representing the DP bridge input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Second input port representing the DP bridge input. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Third input port representing the DP bridge input. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Fourth input port representing the DP bridge input. + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port representing the DP bridge output. + + required: + - port@0 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: ti,j721e-mhdp8546 + then: + properties: + reg: + minItems: 2 + maxItems: 3 + reg-names: + minItems: 2 + maxItems: 3 + else: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + maxItems: 2 + +required: + - compatible + - clocks + - reg + - reg-names + - phys + - phy-names + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + mhdp: dp-bridge@f0fb000000 { + compatible = "cdns,mhdp8546"; + reg = <0xf0 0xfb000000 0x0 0x1000000>; + reg-names = "mhdptx"; + clocks = <&mhdp_clock>; + phys = <&dp_phy>; + phy-names = "dpphy"; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_bridge_input: endpoint { + remote-endpoint = <&xxx_dpi_output>; + }; + }; + + port@4 { + reg = <4>; + dp_bridge_output: endpoint { + remote-endpoint = <&xxx_dp_connector_input>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml new file mode 100644 index 000000000000..5fb54375aeb6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + clock-names: + const: refclk + + clocks: + maxItems: 1 + description: | + Optional external clock connected to REF_CLK input. + The clock rate must be in 10..154 MHz range. + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for MIPI DSI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml new file mode 100644 index 000000000000..b0589fa16736 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chrontel CH7033 Video Encoder + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: chrontel,ch7033 + + reg: + maxItems: 1 + description: I2C address of the device + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for RGB input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DVI port, should be connected to a node compatible with the + dvi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vga-dvi-encoder@76 { + compatible = "chrontel,ch7033"; + reg = <0x76>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&dvi_in>; + }; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt deleted file mode 100644 index 164cbb15f04c..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt +++ /dev/null @@ -1,50 +0,0 @@ -Dumb RGB to VGA DAC bridge ---------------------------- - -This binding is aimed for dumb RGB to VGA DAC based bridges that do not require -any configuration. - -Required properties: - -- compatible: Must be "dumb-vga-dac" - -Required nodes: - -This device has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for RGB input -- Video port 1 for VGA output - -Optional properties: -- vdd-supply: Power supply for DAC - -Example -------- - -bridge { - compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_bridge_in: endpoint { - remote-endpoint = <&tcon0_out_vga>; - }; - }; - - port@1 { - reg = <1>; - - vga_bridge_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt deleted file mode 100644 index 33bf981fbe33..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ /dev/null @@ -1,33 +0,0 @@ -Synopsys DesignWare HDMI TX Encoder -=================================== - -This document defines device tree properties for the Synopsys DesignWare HDMI -TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding -specification by itself but is meant to be referenced by platform-specific -device tree bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each property is required or optional. - -- reg: Memory mapped base address and length of the DWC HDMI TX registers. - -- reg-io-width: Width of the registers specified by the reg property. The - value is expressed in bytes and must be equal to 1 or 4 if specified. The - register width defaults to 1 if the property is not present. - -- interrupts: Reference to the DWC HDMI TX interrupt. - -- clocks: References to all the clocks specified in the clock-names property - as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. - -- clock-names: The DWC HDMI TX uses the following clocks. - - - "iahb" is the bus clock for either AHB and APB (mandatory). - - "isfr" is the internal register configuration clock (mandatory). - - "cec" is the HDMI CEC controller main clock (optional). - -- ports: The connectivity of the DWC HDMI TX with the rest of the system is - expressed in using ports as specified in the device graph bindings defined - in Documentation/devicetree/bindings/graph.txt. The numbering of the ports - is platform-specific. diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt deleted file mode 100644 index b13adf30b8d3..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt +++ /dev/null @@ -1,32 +0,0 @@ -Synopsys DesignWare MIPI DSI host controller -============================================ - -This document defines device tree properties for the Synopsys DesignWare MIPI -DSI host controller. It doesn't constitue a device tree binding specification -by itself but is meant to be referenced by platform-specific device tree -bindings. - -When referenced from platform device tree bindings the properties defined in -this document are defined as follows. The platform device tree bindings are -responsible for defining whether each optional property is used or not. - -- reg: Memory mapped base address and length of the DesignWare MIPI DSI - host controller registers. (mandatory) - -- clocks: References to all the clocks specified in the clock-names property - as specified in [1]. (mandatory) - -- clock-names: - - "pclk" is the peripheral clock for either AHB and APB. (mandatory) - - "px_clk" is the pixel clock for the DPI/RGB input. (optional) - -- resets: References to all the resets specified in the reset-names property - as specified in [2]. (optional) - -- reset-names: string reset name, must be "apb" if used. (optional) - -- panel or bridge node: see [3]. (mandatory) - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/reset/reset.txt -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml new file mode 100644 index 000000000000..94543006f5de --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp LVDS Display Bridge + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. + + The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the LDB's configuration + registers. + + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color + format and can map the input to VESA or JEIDA standards. The two channels + cannot be used simultaneously, that is to say, the user should pick one of + them to use. Two LDB channels from two LDB instances can work together in + LDB split mode to support a dual link LVDS display. The channel indexes + have to be different. Channel0 outputs odd pixels and channel1 outputs + even pixels. + + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel + input color format. The two channels can be used simultaneously, either + in dual mode or split mode. In dual mode, the two channels output identical + data. In split mode, channel0 outputs odd pixels and channel1 outputs even + pixels. + + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming + consistency, this binding calls it LDB. + +properties: + compatible: + enum: + - fsl,imx8qm-ldb + - fsl,imx8qxp-ldb + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: pixel clock + - description: bypass clock + + clock-names: + items: + - const: pixel + - const: bypass + + power-domains: + maxItems: 1 + + fsl,companion-ldb: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion LDB which is used in LDB split mode. + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of LDB. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The channel index. + enum: [ 0, 1 ] + + phys: + description: A phandle to the phy module representing the LVDS PHY. + maxItems: 1 + + phy-names: + const: lvds_phy + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port of the channel. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port of the channel. + + required: + - "#address-cells" + - "#size-cells" + - reg + - phys + - phy-names + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - power-domains + - channel@0 + - channel@1 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-ldb + then: + properties: + fsl,companion-ldb: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml new file mode 100644 index 000000000000..50bae2122183 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Pixel Combiner + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a + single display controller and manipulates the two streams to support a number + of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as + either one screen, two screens, or virtual screens. The pixel combiner is + also responsible for generating some of the control signals for the pixel link + output channel. + +properties: + compatible: + enum: + - fsl,imx8qm-pixel-combiner + - fsl,imx8qxp-pixel-combiner + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a display stream of pixel combiner. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The display stream index. + enum: [ 0, 1 ] + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the display stream. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the display stream. + + required: + - "#address-cells" + - "#size-cells" + - reg + - port@0 + - port@1 + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + pixel-combiner@56020000 { + compatible = "fsl,imx8qxp-pixel-combiner"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x56020000 0x10000>; + clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>; + clock-names = "apb"; + power-domains = <&pd IMX_SC_R_DC_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint { + remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint { + remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + port@0 { + reg = <0>; + + dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint { + remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>; + }; + }; + + port@1 { + reg = <1>; + + dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint { + remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml new file mode 100644 index 000000000000..38ecc7926fad --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Display Pixel Link + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard + asynchronous linkage between pixel sources(display controller or + camera module) and pixel consumers(imaging or displays). + It consists of two distinct functions, a pixel transfer function and a + control interface. Multiple pixel channels can exist per one control channel. + This binding documentation is only for pixel links whose pixel sources are + display controllers. + + The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU) + firmware. + +properties: + compatible: + enum: + - fsl,imx8qm-dc-pixel-link + - fsl,imx8qxp-dc-pixel-link + + fsl,dc-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller index that the pixel link + connects to. + + fsl,dc-stream-id: + $ref: /schemas/types.yaml#/definitions/uint8 + description: | + u8 value representing the display controller stream index that the pixel + link connects to. + enum: [0, 1] + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link input port node from upstream video source. + + patternProperties: + "^port@[1-4]$": + $ref: /schemas/graph.yaml#/properties/port + description: The pixel link output port node to downstream bridge. + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-dc-pixel-link + then: + properties: + fsl,dc-id: + const: 0 + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-dc-pixel-link + then: + properties: + fsl,dc-id: + enum: [0, 1] + +required: + - compatible + - fsl,dc-id + - fsl,dc-stream-id + - ports + +additionalProperties: false + +examples: + - | + dc0-pixel-link0 { + compatible = "fsl,imx8qxp-dc-pixel-link"; + fsl,dc-id = /bits/ 8 <0>; + fsl,dc-stream-id = /bits/ 8 <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* from dc0 pixel combiner channel0 */ + port@0 { + reg = <0>; + + dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>; + }; + }; + + /* to PXL2DPIs in MIPI/LVDS combo subsystems */ + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>; + }; + + dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>; + }; + }; + + /* unused */ + port@2 { + reg = <2>; + }; + + /* unused */ + port@3 { + reg = <3>; + }; + + /* to imaging subsystem */ + port@4 { + reg = <4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml new file mode 100644 index 000000000000..e4e77fad05f1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) + interfaces the pixel link 36-bit data output and the DSI controller’s + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module + used in LVDS mode, to remap the pixel color codings between those modules. + This module is purely combinatorial. + + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the PXL2DPI's configuration + register. + +properties: + compatible: + const: fsl,imx8qxp-pxl2dpi + + fsl,sc-resource: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The SCU resource ID associated with this PXL2DPI instance. + + power-domains: + maxItems: 1 + + fsl,companion-pxl2dpi: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion PXL2DPI which is used by downstream + LVDS Display Bridge(LDB) in split mode. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI input port node from pixel link. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI output port node to downstream bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - fsl,sc-resource + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml new file mode 100644 index 000000000000..d6e51d0cf546 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys + Designware MIPI DPHY embedded in Freescale i.MX93 SoC. Some configurations + and extensions to them are controlled by i.MX93 media blk-ctrl. + +allOf: + - $ref: snps,dw-mipi-dsi.yaml# + +properties: + compatible: + const: fsl,imx93-mipi-dsi + + clocks: + items: + - description: apb clock + - description: pixel clock + - description: PHY configuration clock + - description: PHY reference clock + + clock-names: + items: + - const: pclk + - const: pix + - const: phy_cfg + - const: phy_ref + + interrupts: + maxItems: 1 + + fsl,media-blk-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map + configurations from LCDIF display controller to the MIPI DSI host + controller and MIPI DPHY PLL related configurations through PLL SoC + interface. + + power-domains: + maxItems: 1 + +required: + - compatible + - interrupts + - fsl,media-blk-ctrl + - power-domains + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/fsl,imx93-power.h> + + dsi@4ae10000 { + compatible = "fsl,imx93-mipi-dsi"; + reg = <0x4ae10000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_MIPI_PHY_CFG>, + <&clk IMX93_CLK_24M>; + clock-names = "pclk", "pix", "phy_cfg", "phy_ref"; + fsl,media-blk-ctrl = <&media_blk_ctrl>; + power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "raydium,rm67191"; + reg = <0>; + reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + video-mode = <2>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsi>; + }; + }; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml new file mode 100644 index 000000000000..07388bf2b90d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP DPI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The i.MX8MP mediamix contains two registers which are responsible + for configuring the on-SoC DPI-to-LVDS serializer. This describes + those registers as bridge within the DT. + +properties: + compatible: + enum: + - fsl,imx6sx-ldb + - fsl,imx8mp-ldb + - fsl,imx93-ldb + + clocks: + maxItems: 1 + + clock-names: + const: ldb + + reg: + maxItems: 2 + + reg-names: + items: + - const: ldb + - const: lvds + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@1 + +required: + - compatible + - clocks + - ports + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx6sx-ldb + - fsl,imx93-ldb + then: + properties: + ports: + properties: + port@2: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + + blk-ctrl { + #address-cells = <1>; + #size-cells = <1>; + + bridge@5c { + compatible = "fsl,imx8mp-ldb"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml new file mode 100644 index 000000000000..a44d025d33bd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port + +maintainers: + - Nicolas Boichat <drinkcat@chromium.org> + +description: | + ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to + DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip + which is connected to and operated by the ChromeOS Embedded Controller + (See google,cros-ec.yaml). It is accessed using I2C tunneling through + the EC and therefore its node should be a child of an EC I2C tunnel node + (See google,cros-ec-i2c-tunnel.yaml). + +properties: + compatible: + const: google,cros-ec-anx7688 + + reg: + maxItems: 1 + description: I2C address of the device. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: USB Type-c connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + i2c_tunnel_b: i2c-tunnel1 { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + anx7688: anx7688@2c { + compatible = "google,cros-ec-anx7688"; + reg = <0x2c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + anx7688_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + port@1 { + reg = <1>; + anx7688_out: endpoint { + remote-endpoint = <&typec_connector>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml new file mode 100644 index 000000000000..0b27df429bdc --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ4780 HDMI Transmitter + +maintainers: + - H. Nikolaus Schaller <hns@goldelico.com> + +description: | + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4 + TX controller IP with accompanying PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + const: ingenic,jz4780-dw-hdmi + + reg-io-width: + const: 4 + + clocks: + maxItems: 2 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from LCD controller output. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Link to the HDMI connector. + +required: + - compatible + - clocks + - clock-names + - ports + - reg-io-width + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + + hdmi: hdmi@10180000 { + compatible = "ingenic,jz4780-dw-hdmi"; + reg = <0x10180000 0x8000>; + reg-io-width = <4>; + interrupt-parent = <&intc>; + interrupts = <3>; + clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in: port@0 { + reg = <0>; + dw_hdmi_in: endpoint { + remote-endpoint = <&jz4780_lcd_out>; + }; + }; + hdmi_out: port@1 { + reg = <1>; + dw_hdmi_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml new file mode 100644 index 000000000000..958a073f4ff7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay mipi dsi controller + +maintainers: + - Anitha Chrisanthus <anitha.chrisanthus@intel.com> + - Edmond J Dea <edmund.j.dea@intel.com> + +properties: + compatible: + const: intel,keembay-dsi + + reg: + items: + - description: MIPI registers range + + reg-names: + items: + - const: mipi + + clocks: + items: + - description: MIPI DSI clock + - description: MIPI DSI econfig clock + - description: MIPI DSI config clock + + clock-names: + items: + - const: clk_mipi + - const: clk_mipi_ecfg + - const: clk_mipi_cfg + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: MIPI DSI input port. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + mipi-dsi@20900000 { + compatible = "intel,keembay-dsi"; + reg = <0x20900000 0x4000>; + reg-names = "mipi"; + clocks = <&scmi_clk 0x86>, + <&scmi_clk 0x88>, + <&scmi_clk 0x89>; + clock-names = "clk_mipi", "clk_mipi_ecfg", + "clk_mipi_cfg"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&disp_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&adv7535_input>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml new file mode 100644 index 000000000000..c9a882ee6d98 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it6505 + +maintainers: + - Allen Chen <allen.chen@ite.com.tw> + +description: | + The IT6505 is a high-performance DisplayPort 1.1a transmitter, + fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. + The IT6505 supports color depth of up to 36 bits (12 bits/color) + and ensures robust transmission of high-quality uncompressed video + content, along with uncompressed and compressed digital audio content. + + Aside from the various video output formats supported, the IT6505 + also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192kHz and sample size up to 24 bits. + In addition, an S/PDIF input port takes in compressed audio of up to + 192kHz frame rate. + + Each IT6505 chip comes preprogrammed with an unique HDCP key, + in compliance with the HDCP 1.3 standard so as to provide secure + transmission of high-definition content. Users of the IT6505 need not + purchase any HDCP keys or ROMs. + +properties: + compatible: + const: ite,it6505 + + reg: + maxItems: 1 + + ovdd-supply: + description: I/O voltage + + pwr18-supply: + description: core voltage + + interrupts: + maxItems: 1 + description: interrupt specifier of INT pin + + reset-gpios: + maxItems: 1 + description: gpio specifier of RESET pin + + extcon: + maxItems: 1 + description: extcon specifier for the Power Delivery + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: A port node pointing to DPI host port node + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + link-frequencies: + minItems: 1 + maxItems: 1 + description: Allowed max link frequencies in Hz + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for DP output + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + uniqueItems: true + items: + - enum: [ 0, 1 ] + - const: 1 + - const: 2 + - const: 3 + + required: + - port@0 + - port@1 + +required: + - compatible + - ovdd-supply + - pwr18-supply + - interrupts + - reset-gpios + - extcon + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dp-bridge@5c { + compatible = "ite,it6505"; + interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&it6505_pins>; + ovdd-supply = <&mt6358_vsim1_reg>; + pwr18-supply = <&it6505_pp18_reg>; + reset-gpios = <&pio 179 1>; + extcon = <&usbc_extcon>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it6505_in: endpoint { + remote-endpoint = <&dpi_out>; + link-frequencies = /bits/ 64 <150000000>; + }; + }; + + port@1 { + reg = <1>; + it6505_out: endpoint { + remote-endpoint = <&dp_in>; + data-lanes = <0 1>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml new file mode 100644 index 000000000000..a7eb2603691f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE it66121 HDMI bridge + +maintainers: + - Phong LE <ple@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The IT66121 is a high-performance and low-power single channel HDMI + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible + to DVI 1.0 specifications. + +properties: + compatible: + enum: + - ite,it66121 + - ite,it6610 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + vrf12-supply: + description: Regulator for 1.2V analog core power. + + vcn33-supply: + description: Regulator for 3.3V digital core power. + + vcn18-supply: + description: Regulator for 1.8V IO core power. + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI Connector port. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vrf12-supply + - vcn33-supply + - vcn18-supply + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + it66121hdmitx: hdmitx@4c { + compatible = "ite,it66121"; + pinctrl-names = "default"; + pinctrl-0 = <&ite_pins_default>; + vcn33-supply = <&mt6358_vcn33_wifi_reg>; + vcn18-supply = <&mt6358_vcn18_reg>; + vrf12-supply = <&mt6358_vrf12_reg>; + reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&display_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_conn_out: endpoint { + remote-endpoint = <&hdmi_conn_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 000000000000..2cef25215798 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + + vcchdmipll-supply: + description: A 1.8V supply that powers the HDMI PLL. + + vcchdmitx-supply: + description: A 1.8V supply that powers the HDMI TX part. + + vcclvdspll-supply: + description: A 1.8V supply that powers the LVDS PLL. + + vcclvdstx-supply: + description: A 1.8V supply that powers the LVDS TX part. + + vccmipirx-supply: + description: A 1.8V supply that powers the MIPI RX part. + + vccsysclk-supply: + description: A 1.8V supply that powers the SYSCLK. + + vdd-supply: + description: A 1.8V supply that powers the digital part. + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml new file mode 100644 index 000000000000..9a6e9b25d14a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS + or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. + +properties: + compatible: + enum: + - lontium,lt9211 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vccio-supply: + description: Regulator for 1.8V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI input or + LVDS port-1 for LVDS input or DPI input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input or LVDS port-2 + for LVDS input. Used in combination with primary + port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI DSI port-1 for MIPI output or + LVDS port-1 for LVDS output or DPI output. + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI output or LVDS port-2 + for LVDS output. Used in combination with primary + port-1 to drive higher resolution displays. + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - vccio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9211"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <<9211_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml new file mode 100644 index 000000000000..5b9d36f7af30 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt9611 + - lontium,lt9611uxc + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + vdd-supply: + description: Regulator for 1.8V MIPI phy power. + + vcc-supply: + description: Regulator for 3.3V IO power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Additional MIPI port-2 for MIPI input, used in combination + with primary MIPI port-1 to drive higher resolution displays + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + HDMI port for HDMI output + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - interrupts + - vdd-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c10 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lt9611_b: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 8f373029f5d2..84aafcbf0919 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -32,32 +32,47 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter - - const: lvds-encoder # Generic LVDS encoder compatible fallback + - enum: + - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer + - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer + - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter + - const: lvds-encoder # Generic LVDS encoder compatible fallback - items: - - enum: - - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver - - const: lvds-decoder # Generic LVDS decoders compatible fallback + - enum: + - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver + - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver + - const: lvds-decoder # Generic LVDS decoders compatible fallback - enum: - - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer + - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. See details in + Documentation/devicetree/bindings/display/lvds.yaml + port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 1 is the LVDS output For LVDS decoders, port 1 is the parallel output @@ -66,15 +81,55 @@ properties: - port@0 - port@1 + pclk-sample: + description: + Data sampling on rising or falling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + powerdown-gpios: description: The GPIO used to control the power down line of this device. maxItems: 1 + power-supply: true + +allOf: + - if: + not: + properties: + compatible: + contains: + const: lvds-decoder + then: + properties: + ports: + properties: + port@0: + properties: + endpoint: + properties: + data-mapping: false + + - if: + not: + properties: + compatible: + contains: + const: lvds-encoder + then: + properties: + pclk-sample: false + required: - compatible - ports +additionalProperties: false + + examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml new file mode 100644 index 000000000000..350fb8f400f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Northwest Logic MIPI-DSI controller on i.MX SoCs + +maintainers: + - Guido Gúnther <agx@sigxcpu.org> + - Robert Chiras <robert.chiras@nxp.com> + +description: | + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for + the SOCs NWL MIPI-DSI host controller. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + compatible: + const: fsl,imx8mq-nwl-dsi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: DSI core clock + - description: RX_ESC clock (used in escape mode) + - description: TX_ESC clock (used in escape mode) + - description: PHY_REF clock + - description: LCDIF clock + + clock-names: + items: + - const: core + - const: rx_esc + - const: tx_esc + - const: phy_ref + - const: lcdif + + mux-controls: + description: + mux controller node to use for operating the input mux + + phys: + maxItems: 1 + description: + A phandle to the phy module representing the DPHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + resets: + items: + - description: dsi byte reset line + - description: dsi dpi reset line + - description: dsi esc reset line + - description: dsi pclk reset line + + reset-names: + items: + - const: byte + - const: dpi + - const: esc + - const: pclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from LCDIF + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: sub-node describing the input from DCSS + + oneOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output port node to the panel or the next bridge + in the chain + + required: + - port@0 + - port@1 + +required: + - '#address-cells' + - '#size-cells' + - clock-names + - clocks + - compatible + - interrupts + - mux-controls + - phy-names + - phys + - ports + - reg + - reset-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + dsi@30a00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-nwl-dsi"; + reg = <0x30A00000 0x300>; + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, + <&clk IMX8MQ_CLK_DSI_AHB>, + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, + <&clk IMX8MQ_CLK_DSI_PHY_REF>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + mux-controls = <&mux 0>; + power-domains = <&pgc_mipi>; + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; + reset-names = "byte", "dpi", "esc", "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + + panel@0 { + compatible = "rocktech,jh057n00900"; + reg = <0>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; + reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0>; + mipi_dsi_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_mipi_dsi>; + }; + }; + port@1 { + reg = <1>; + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml new file mode 100644 index 000000000000..70ec70922c13 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN3460 eDP to LVDS bridge + +maintainers: + - Sean Paul <seanpaul@chromium.org> + +properties: + compatible: + const: nxp,ptn3460 + + reg: + description: I2C address of the bridge + maxItems: 1 + + edid-emulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The EDID emulation entry to use + Value Resolution Description + 0 1024x768 NXP Generic + 1 1920x1080 NXP Generic + 2 1920x1080 NXP Generic + 3 1600x900 Samsung LTM200KT + 4 1920x1080 Samsung LTM230HT + 5 1366x768 NXP Generic + 6 1600x900 ChiMei M215HGE + enum: [0, 1, 2, 3, 4, 5, 6] + + powerdown-gpios: + description: GPIO connected to the PD_N signal. + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RST_N signal. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP input + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - edid-emulation + - powerdown-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + edid-emulation = <5>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml new file mode 100644 index 000000000000..b8e9cf6ce4e6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA998x HDMI transmitter + +maintainers: + - Russell King <linux@armlinux.org.uk> + +properties: + compatible: + const: nxp,tda998x + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + video-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x230145 + maximum: 0xffffff + description: + 24 bits value which defines how the video controller output is wired to + the TDA998x input. + + audio-ports: + description: + Array of 2 values per DAI (Documentation/sound/soc/dai.rst). + The implementation allows one or two DAIs. + If two DAIs are defined, they must be of different type. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 2 + items: + items: + - description: | + The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S + (see include/dt-bindings/display/tda998x.h). + enum: [ 1, 2 ] + - description: + The second value defines the tda998x AP_ENA reg content when the + DAI in question is used. + maximum: 0xff + + '#sound-dai-cells': + enum: [ 0, 1 ] + + nxp,calib-gpios: + maxItems: 1 + description: + Calibration GPIO, which must correspond with the gpio used for the + TDA998x interrupt pin. + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + type: object + description: Parallel input port + + port@1: + type: object + description: HDMI output port + +required: + - compatible + - reg + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/display/tda998x.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda998x: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + video-ports = <0x230145>; + + #sound-dai-cells = <1>; + /* DAI-format / AP_ENA reg value */ + audio-ports = <TDA998x_SPDIF 0x04>, + <TDA998x_I2S 0x03>; + + port { + tda998x_in: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml new file mode 100644 index 000000000000..e6397ac2048b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parade PS8622/PS8625 DisplayPort to LVDS Converter + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + enum: + - parade,ps8622 + - parade,ps8625 + + reg: + maxItems: 1 + + lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: Number of DP lanes to use. + + use-external-pwm: + type: boolean + description: Backlight will be controlled by an external PWM. + + reset-gpios: + maxItems: 1 + description: GPIO connected to RST_ pin. + + sleep-gpios: + maxItems: 1 + description: GPIO connected to PD_ pin. + + vdd12-supply: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS output. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DisplayPort input. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - sleep-gpios + - ports + +allOf: + - if: + properties: + compatible: + const: parade,ps8622 + then: + properties: + lane-count: + const: 1 + else: + properties: + lane-count: + const: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; + lane-count = <2>; + use-external-pwm; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt deleted file mode 100644 index c989c3807f2b..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ps8622.txt +++ /dev/null @@ -1,31 +0,0 @@ -ps8622-bridge bindings - -Required properties: - - compatible: "parade,ps8622" or "parade,ps8625" - - reg: first i2c address of the bridge - - sleep-gpios: OF device-tree gpio specification for PD_ pin. - - reset-gpios: OF device-tree gpio specification for RST_ pin. - -Optional properties: - - lane-count: number of DP lanes to use - - use-external-pwm: backlight will be controlled by an external PWM - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@48 { - compatible = "parade,ps8622"; - reg = <0x48>; - sleep-gpios = <&gpc3 6 1 0 0>; - reset-gpios = <&gpc3 1 1 0 0>; - lane-count = <1>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 5dff93641bea..5856450c5da7 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -4,11 +4,10 @@ $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MIPI DSI to eDP Video Format Converter Device Tree Bindings +title: MIPI DSI to eDP Video Format Converter maintainers: - Nicolas Boichat <drinkcat@chromium.org> - - Enric Balletbo i Serra <enric.balletbo@collabora.com> description: | The PS8640 is a low power MIPI-to-eDP video format converter supporting @@ -35,29 +34,26 @@ properties: description: GPIO connected to active low reset. vdd12-supply: - maxItems: 1 description: Regulator for 1.2V digital core power. vdd33-supply: - maxItems: 1 description: Regulator for 3.3V digital core power. + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DSI input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). required: @@ -77,7 +73,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -104,9 +100,22 @@ examples: reg = <1>; ps8640_out: endpoint { remote-endpoint = <&panel_in>; - }; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; }; }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt deleted file mode 100644 index 361971ba104d..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml new file mode 100644 index 000000000000..d33026f85e19 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car MIPI DSI/CSI-2 Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas + R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up + to four data lanes. + +properties: + compatible: + enum: + - renesas,r8a779a0-dsi-csi2-tx # for V3U + - renesas,r8a779g0-dsi-csi2-tx # for V4H + + reg: + maxItems: 1 + + clocks: + items: + - description: Functional clock + - description: DSI (and CSI-2) functional clock + - description: PLL reference clock + + clock-names: + items: + - const: fck + - const: dsi + - const: pll + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI/CSI-2 output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CP>; + clock-names = "fck", "dsi", "pll"; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&sn65dsi86_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml new file mode 100644 index 000000000000..e08c24633926 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MIPI DSI Encoder + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This binding describes the MIPI DSI encoder embedded in the Renesas + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with + up to four data lanes. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - renesas,r9a07g054-mipi-dsi # RZ/V2L + - const: renesas,rzg2l-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + items: + - description: Sequence operation channel 0 interrupt + - description: Sequence operation channel 1 interrupt + - description: Video-Input operation channel 1 interrupt + - description: DSI Packet Receive interrupt + - description: DSI Fatal Error interrupt + - description: DSI D-PHY PPI interrupt + - description: Debug interrupt + + interrupt-names: + items: + - const: seq0 + - const: seq1 + - const: vin1 + - const: rcv + - const: ferr + - const: ppi + - const: debug + + clocks: + items: + - description: DSI D-PHY PLL multiplied clock + - description: DSI D-PHY system clock + - description: DSI AXI bus clock + - description: DSI Register access clock + - description: DSI Video clock + - description: DSI D-PHY Escape mode transmit clock + + clock-names: + items: + - const: pllclk + - const: sysclk + - const: aclk + - const: pclk + - const: vclk + - const: lpclk + + resets: + items: + - description: MIPI_DSI_CMN_RSTB + - description: MIPI_DSI_ARESET_N + - description: MIPI_DSI_PRESET_N + + reset-names: + items: + - const: rst + - const: arst + - const: prst + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi0: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi"; + reg = <0x10850000 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt deleted file mode 100644 index 819f3e31013c..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ /dev/null @@ -1,86 +0,0 @@ -Renesas Gen3 DWC HDMI TX Encoder -================================ - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall contain one or more of - - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX - - "renesas,r8a774b1-hdmi" for R8A774B1 (RZ/G2N) compatible HDMI TX - - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX - - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX - - "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX - - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible - HDMI TX - - When compatible with generic versions, nodes must list the SoC-specific - version corresponding to the platform first, followed by the - family-specific version. - -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 - corresponding to the video input of the controller and one port numbered 1 - corresponding to its HDMI output, and one port numbered 2 corresponding to - sound input of the controller. Each port shall have a single endpoint. - -Optional properties: - -- power-domains: Shall reference the power domain that contains the DWC HDMI, - if any. - - -Example: - - hdmi0: hdmi@fead0000 { - compatible = "renesas,r8a7795-dw-hdmi"; - reg = <0 0xfead0000 0 0x10000>; - interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; - clock-names = "iahb", "isfr"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - dw_hdmi0_in: endpoint { - remote-endpoint = <&du_out_hdmi0>; - }; - }; - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - rcar_dw_hdmi0_sound_in: endpoint { - remote-endpoint = <&hdmi_sound_out>; - }; - }; - }; - }; - - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - remote-endpoint = <&rcar_dw_hdmi0_out>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml new file mode 100644 index 000000000000..e3ec697f89e7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car DWC HDMI TX Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: synopsys,dw-hdmi.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX + - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX + - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX + - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX + - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX + - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX + - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX + - const: renesas,rcar-gen3-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + + required: + - port@0 + - port@1 + - port@2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + hdmi@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0xfead0000 0x10000>; + interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; + }; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt deleted file mode 100644 index c62ce2494ed9..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ /dev/null @@ -1,85 +0,0 @@ -Renesas R-Car LVDS Encoder -========================== - -These DT bindings describe the LVDS encoder embedded in the Renesas R-Car -Gen2, R-Car Gen3 and RZ/G SoCs. - -Required properties: - -- compatible : Shall contain one of - - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders - - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders - - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders - - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders - - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders - - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders - - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders - -- reg: Base address and length for the memory-mapped registers -- clocks: A list of phandles + clock-specifier pairs, one for each entry in - the clock-names property. -- clock-names: Name of the clocks. This property is model-dependent. - - The functional clock, which mandatory for all models, shall be listed - first, and shall be named "fck". - - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or - DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be - named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN - numerical index. - - When the clocks property only contains the functional clock, the - clock-names property may be omitted. -- resets: A phandle + reset specifier for the module reset - -Required nodes: - -The LVDS encoder has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 corresponds to the parallel RGB input -- Video port 1 corresponds to the LVDS output - -Each port shall have a single endpoint. - -Optional properties: - -- renesas,companion : phandle to the companion LVDS encoder. This property is - mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to - the second encoder to be used as a companion in dual-link mode. It shall not - be set for any other LVDS encoder. - - -Example: - - lvds0: lvds@feb90000 { - compatible = "renesas,r8a77990-lvds"; - reg = <0 0xfeb90000 0 0x20>; - clocks = <&cpg CPG_MOD 727>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 727>; - - renesas,companion = <&lvds1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - lvds0_in: endpoint { - remote-endpoint = <&du_out_lvds0>; - }; - }; - port@1 { - reg = <1>; - lvds0_out: endpoint { - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml new file mode 100644 index 000000000000..bb9dbfb9beaf --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car LVDS Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + These DT bindings describe the LVDS encoder embedded in the Renesas R-Car + Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders + - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders + - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders + - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders + - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders + - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders + - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders + - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders + - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders + - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders + - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders + - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders + - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders + - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders + - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders + - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders + - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders + - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: LVDS output port + + required: + - port@0 + - port@1 + + power-domains: + maxItems: 1 + + renesas,companion: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the companion LVDS encoder. This property is mandatory + for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall + point to the second encoder to be used as a companion in dual-link mode. + It shall not be set for any other LVDS encoder. + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +if: + properties: + compatible: + enum: + - renesas,r8a774c0-lvds + - renesas,r8a77990-lvds + - renesas,r8a77995-lvds +then: + properties: + clocks: + minItems: 1 + items: + - description: Functional clock + - description: EXTAL input clock + - description: DU_DOTCLKIN0 input clock + - description: DU_DOTCLKIN1 input clock + + clock-names: + minItems: 1 + items: + - const: fck + # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. + # These clocks are optional. + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + - enum: + - extal + - dclkin.0 + - dclkin.1 + + required: + - clock-names + +else: + properties: + clocks: + items: + - description: Functional clock + + clock-names: + items: + - const: fck + + renesas,companion: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + lvds@feb90000 { + compatible = "renesas,r8a7795-lvds"; + reg = <0xfeb90000 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77990-sysc.h> + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90000 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 727>; + + renesas,companion = <&lvds1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + + lvds1: lvds@feb90100 { + compatible = "renesas,r8a77990-lvds"; + reg = <0xfeb90100 0x20>; + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in2>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml new file mode 100644 index 000000000000..4ed7a799ba26 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -0,0 +1,280 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung MIPI DSIM bridge controller + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Jagan Teki <jagan@amarulasolutions.com> + - Marek Szyprowski <m.szyprowski@samsung.com> + +description: | + Samsung MIPI DSIM bridge controller can be found it on Exynos + and i.MX8M Mini/Nano/Plus SoC's. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos3250-mipi-dsi + - samsung,exynos4210-mipi-dsi + - samsung,exynos5410-mipi-dsi + - samsung,exynos5422-mipi-dsi + - samsung,exynos5433-mipi-dsi + - fsl,imx8mm-mipi-dsim + - fsl,imx8mp-mipi-dsim + - items: + - const: fsl,imx8mn-mipi-dsim + - const: fsl,imx8mm-mipi-dsim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + maxItems: 5 + + samsung,phy-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: phandle to the samsung phy-type + + power-domains: + maxItems: 1 + + samsung,power-domain: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the associated samsung power domain + + vddcore-supply: + description: MIPI DSIM Core voltage supply (e.g. 1.1V) + + vddio-supply: + description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) + + samsung,burst-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM high speed burst mode frequency. If absent, + the pixel clock from the attached device or bridge + will be used instead. + + samsung,esc-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM escape mode frequency. + + samsung,pll-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM oscillator clock frequency. If absent, the clock frequency + of sclk_mipi will be used instead. + + phys: + maxItems: 1 + + phy-names: + const: dsim + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + DSI output port node to the panel or the next bridge + in the chain. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 1, 2, 3, 4 ] + + lane-polarities: + minItems: 1 + maxItems: 5 + description: + The Samsung MIPI DSI IP requires that all the data lanes have + the same polarity. + + dependencies: + lane-polarities: [data-lanes] + +required: + - clock-names + - clocks + - compatible + - interrupts + - reg + - samsung,esc-clock-frequency + +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-mipi-dsi + + then: + properties: + clocks: + minItems: 5 + + clock-names: + items: + - const: bus_clk + - const: phyclk_mipidphy0_bitclkdiv8 + - const: phyclk_mipidphy0_rxclkesc0 + - const: sclk_rgb_vclk_to_dsim0 + - const: sclk_mipi + + ports: + required: + - port@0 + + required: + - ports + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos5410-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: sclk_mipi + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + - samsung,phy-type + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + power-domains = <&pd_disp>; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt deleted file mode 100644 index 6e14e087c0d0..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ /dev/null @@ -1,74 +0,0 @@ -sii902x HDMI bridge bindings - -Required properties: - - compatible: "sil,sii9022" - - reg: i2c address of the bridge - -Optional properties: - - interrupts: describe the interrupt line used to inform the host - about hotplug events. - - reset-gpios: OF device-tree gpio specification for RST_N pin. - - HDMI audio properties: - - #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin - is wired, <1> if the both are wired. HDMI audio is - configured only if this property is found. - - sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 - Each integer indicates which i2s pin is connected to which - audio fifo. The first integer selects i2s audio pin for the - first audio fifo#0 (HDMI channels 1&2), second for fifo#1 - (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s - pins (SD0 - SD3). Any i2s pin can be connected to any fifo, - but there can be no gaps. E.g. an i2s pin must be mapped to - fifo#0 and fifo#1 before mapping a channel to fifo#2. Default - value is <0>, describing SD0 pin beiging routed to hdmi audio - fifo #0. - - clocks: phandle and clock specifier for each clock listed in - the clock-names property - - clock-names: "mclk" - Describes SII902x MCLK input. MCLK can be used to produce - HDMI audio CTS values. This property follows - Documentation/devicetree/bindings/clock/clock-bindings.txt - consumer binding. - - If HDMI audio is configured the sii902x device becomes an I2S - and/or spdif audio codec component (e.g a digital audio sink), - that can be used in configuring a full audio devices with - simple-card or audio-graph-card binding. See their binding - documents on how to describe the way the sii902x device is - connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.txt - Documentation/devicetree/bindings/sound/audio-graph-card.txt - Note: In case of the audio-graph-card binding the used port - index should be 3. - -Optional subnodes: - - video input: this subnode can contain a video input port node - to connect the bridge to a display controller output (See this - documentation [1]). - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - hdmi-bridge@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - reset-gpios = <&pioA 1 0>; - - #sound-dai-cells = <0>; - sil,i2s-data-lanes = < 0 1 2 >; - clocks = <&mclk>; - clock-names = "mclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - bridge_in: endpoint { - remote-endpoint = <&dc_out>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd960..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml new file mode 100644 index 000000000000..6d1a36b76fcb --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI8620 HDMI/MHL bridge + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +properties: + compatible: + const: sil,sii8620 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + cvcc10-supply: + description: Digital Core Supply Voltage (1.0V) + + interrupts: + maxItems: 1 + + iovcc18-supply: + description: I/O Supply Voltage (1.8V) + + reset-gpios: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + unevaluatedProperties: false + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - cvcc10-supply + - interrupts + - iovcc18-supply + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_musb_con: endpoint { + remote-endpoint = <&musb_con_to_mhl>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml new file mode 100644 index 000000000000..5a69547ad3d7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image sii902x HDMI bridge + +maintainers: + - Boris Brezillon <bbrezillon@kernel.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - sil,sii9022-cpi # CEC Programming Interface + - sil,sii9022-tpi # Transmitter Programming Interface + - const: sil,sii9022 + - const: sil,sii9022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Interrupt line used to inform the host about hotplug events. + + reset-gpios: + maxItems: 1 + + iovcc-supply: + description: I/O Supply Voltage (1.8V or 3.3V) + + cvcc12-supply: + description: Digital Core Supply Voltage (1.2V) + + '#sound-dai-cells': + enum: [ 0, 1 ] + description: | + <0> if only I2S or S/PDIF pin is wired, + <1> if both are wired. + HDMI audio is configured only if this property is found. + If HDMI audio is configured, the sii902x device becomes an I2S and/or + S/PDIF audio codec component (e.g. a digital audio sink), that can be + used in configuring full audio devices with simple-card or + audio-graph-card bindings. See their binding documents on how to describe + the way the + sii902x device is connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.yaml + Documentation/devicetree/bindings/sound/audio-graph-card.yaml + Note: In case of the audio-graph-card binding the used port index should + be 3. + + sil,i2s-data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [ 0, 1, 2, 3 ] + description: + Each integer indicates which I2S pin is connected to which audio FIFO. + The first integer selects the I2S audio pin for the first audio FIFO#0 + (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so + on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be + connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be + mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The + default value is <0>, describing SD0 pin being routed to HDMI audio + FIFO#0. + + clocks: + maxItems: 1 + description: MCLK input. MCLK can be used to produce HDMI audio CTS values. + + clock-names: + const: mclk + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: HDMI output port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Sound input port + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&pioA 1 0>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dc_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 000000000000..176181d25530 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski <m.purski@samsung.com> + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt deleted file mode 100644 index b05052f7d62f..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt +++ /dev/null @@ -1,33 +0,0 @@ -Silicon Image SiI8620 HDMI/MHL bridge bindings - -Required properties: - - compatible: "sil,sii8620" - - reg: i2c address of the bridge - - cvcc10-supply: Digital Core Supply Voltage (1.0V) - - iovcc18-supply: I/O Supply Voltage (1.8V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin - - clocks, clock-names: specification and name of "xtal" clock - - video interfaces: Device node can contain video interface port - node for HDMI encoder according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - sii8620@39 { - reg = <0x39>; - compatible = "sil,sii8620"; - cvcc10-supply = <&ldo36_reg>; - iovcc18-supply = <&ldo34_reg>; - interrupt-parent = <&gpf0>; - interrupts = <2 0>; - reset-gpio = <&gpv7 0 0>; - clocks = <&pmu_system_controller 0>; - clock-names = "xtal"; - - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml new file mode 100644 index 000000000000..43cf4df9811a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent non-programmable DRM bridges + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Maxime Ripard <mripard@kernel.org> + +description: | + This binding supports transparent non-programmable bridges that don't require + any configuration, with a single input and a single output. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 + - items: + - const: corpro,gm7123 + - const: adi,adv7123 + - enum: + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The bridge output + + required: + - port@0 + - port@1 + + enable-gpios: + maxItems: 1 + description: GPIO controlling bridge enable + + vdd-supply: + description: Power supply for the bridge + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml new file mode 100644 index 000000000000..8747b95ec20d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare MIPI DSI host controller + +maintainers: + - Philippe CORNU <philippe.cornu@foss.st.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare MIPI + DSI host controller. It doesn't constitute a device tree binding specification + by itself but is meant to be referenced by platform-specific device tree + bindings. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +allOf: + - $ref: ../dsi-controller.yaml# + +properties: + reg: + maxItems: 1 + + clocks: true + + clock-names: true + + resets: + maxItems: 1 + + reset-names: + const: apb + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input node to receive pixel data. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI output node to panel. + + required: + - port@0 + - port@1 + +required: + - clock-names + - clocks + - ports + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml new file mode 100644 index 000000000000..4b7e54a8f037 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Synopsys DesignWare HDMI TX Controller + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This document defines device tree properties for the Synopsys DesignWare HDMI + TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree + binding specification by itself but is meant to be referenced by device tree + bindings for the platform-specific integrations of the DWC HDMI TX. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + reg: + maxItems: 1 + + reg-io-width: + description: + Width (in bytes) of the registers specified by the reg property. + enum: [1, 4] + default: 1 + + clocks: + minItems: 2 + maxItems: 5 + items: + - description: The bus clock for either AHB and APB + - description: The internal register configuration clock + additionalItems: true + + clock-names: + minItems: 2 + maxItems: 5 + items: + - const: iahb + - const: isfr + additionalItems: true + + interrupts: + maxItems: 1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt deleted file mode 100644 index f5a02f61dd36..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ /dev/null @@ -1,54 +0,0 @@ -Device-Tree bindings for the NXP TDA998x HDMI transmitter - -Required properties; - - compatible: must be "nxp,tda998x" - - - reg: I2C address - -Required node: - - port: Input port node with endpoint definition, as described - in Documentation/devicetree/bindings/graph.txt - -Optional properties: - - interrupts: interrupt number and trigger type - default: polling - - - pinctrl-0: pin control group to be used for - screen plug/unplug interrupt. - - - pinctrl-names: must contain a "default" entry. - - - video-ports: 24 bits value which defines how the video controller - output is wired to the TDA998x input - default: <0x230145> - - - audio-ports: array of 8-bit values, 2 values per one DAI[1]. - The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2]. - The second value defines the tda998x AP_ENA reg content when the DAI - in question is used. The implementation allows one or two DAIs. If two - DAIs are defined, they must be of different type. - - - nxp,calib-gpios: calibration GPIO, which must correspond with the - gpio used for the TDA998x interrupt pin. - -[1] Documentation/sound/soc/dai.rst -[2] include/dt-bindings/display/tda998x.h - -Example: - -#include <dt-bindings/display/tda998x.h> - - tda998x: hdmi-encoder { - compatible = "nxp,tda998x"; - reg = <0x70>; - interrupt-parent = <&gpio0>; - interrupts = <27 2>; /* falling edge */ - pinctrl-0 = <&pmx_camera>; - pinctrl-names = "default"; - video-ports = <0x230145>; - - #sound-dai-cells = <2>; - /* DAI-format AP_ENA reg value */ - audio-ports = < TDA998x_SPDIF 0x04 - TDA998x_I2S 0x03>; - - }; diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt deleted file mode 100644 index d17d1e5820d7..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt +++ /dev/null @@ -1,66 +0,0 @@ -Thine Electronics THC63LVD1024 LVDS decoder -------------------------------------------- - -The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams -to parallel data outputs. The chip supports single/dual input/output modes, -handling up to two LVDS input streams and up to two digital CMOS/TTL outputs. - -Single or dual operation mode, output data mapping and DDR output modes are -configured through input signals and the chip does not expose any control bus. - -Required properties: -- compatible: Shall be "thine,thc63lvd1024" -- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input, - PPL and digital circuitry - -Optional properties: -- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low -- oe-gpios: Output enable GPIO signal, pin name "OE". Active high - -The THC63LVD1024 video port connections are modeled according -to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt - -Required video port nodes: -- port@0: First LVDS input port -- port@2: First digital CMOS/TTL parallel output - -Optional video port nodes: -- port@1: Second LVDS input port -- port@3: Second digital CMOS/TTL parallel output - -The device can operate in single-link mode or dual-link mode. In single-link -mode, all pixels are received on port@0, and port@1 shall not contain any -endpoint. In dual-link mode, even-numbered pixels are received on port@0 and -odd-numbered pixels on port@1, and both port@0 and port@1 shall contain -endpoints. - -Example: --------- - - thc63lvd1024: lvds-decoder { - compatible = "thine,thc63lvd1024"; - - vcc-supply = <®_lvds_vcc>; - powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_dec_in_0: endpoint { - remote-endpoint = <&lvds_out>; - }; - }; - - port@2{ - reg = <2>; - - lvds_dec_out_2: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml new file mode 100644 index 000000000000..8ae382429d2b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thine Electronics THC63LVD1024 LVDS Decoder + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS + streams to parallel data outputs. The chip supports single/dual input/output + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL + outputs. + + Single or dual operation mode, output data mapping and DDR output modes are + configured through input signals and the chip does not expose any control + bus. + +properties: + compatible: + const: thine,thc63lvd1024 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + The device can operate in single or dual input and output modes. + + When operating in single input mode, all pixels are received on port@0, + and port@1 shall not contain any endpoint. In dual input mode, + even-numbered pixels are received on port@0 and odd-numbered pixels on + port@1, and both port@0 and port@1 shall contain endpoints. + + When operating in single output mode all pixels are output from the first + CMOS/TTL port and port@3 shall not contain any endpoint. In dual output + mode pixels are output from both CMOS/TTL ports and both port@2 and + port@3 shall contain endpoints. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First LVDS input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second LVDS input port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: First digital CMOS/TTL parallel output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Second digital CMOS/TTL parallel output + + required: + - port@0 + - port@2 + + oe-gpios: + maxItems: 1 + description: Output enable GPIO signal, pin name "OE", active high. + + powerdown-gpios: + maxItems: 1 + description: Power down GPIO signal, pin name "/PDWN", active low. + + vcc-supply: + description: + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and + digital circuitry. + +required: + - compatible + - ports + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml new file mode 100644 index 000000000000..d3f84d220723 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DLPC3433 MIPI DSI to DMD bridge + +maintainers: + - Jagan Teki <jagan@amarulasolutions.com> + - Christopher Vollo <chris@renewoutreach.org> + +description: | + TI DLPC3433 is a MIPI DSI based display controller bridge + for processing high resolution DMD based projectors. + + It has a flexible configuration of MIPI DSI and DPI signal + input that produces a DMD output in RGB565, RGB666, RGB888 + formats. + + It supports upto 720p resolution with 60 and 120 Hz refresh + rates. + +properties: + compatible: + const: ti,dlpc3433 + + reg: + enum: + - 0x1b + - 0x1d + + enable-gpios: + description: PROJ_ON pin, chip powers up PROJ_ON is high. + + vcc_intf-supply: + description: A 1.8V/3.3V supply that power the Host I/O. + + vcc_flsh-supply: + description: A 1.8V/3.3V supply that power the Flash I/O. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DMD output. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@1b { + compatible = "ti,dlpc3433"; + reg = <0x1b>; + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml new file mode 100644 index 000000000000..48a97bb3e2e0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Texas Instruments SN65DSI83 1x Single-link MIPI DSI + to 1x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi83 + Texas Instruments SN65DSI84 1x Single-link MIPI DSI + to 1x Dual-link or 2x Single-link LVDS + https://www.ti.com/lit/gpn/sn65dsi84 + +properties: + compatible: + enum: + - ti,sn65dsi83 + - ti,sn65dsi84 + + reg: + enum: + - 0x2c + - 0x2d + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + vcc-supply: + description: A 1.8V power supply (see regulator/regulator.yaml). + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-A input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for MIPI DSI Channel-B input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-A output (panel or bridge). + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVDS Channel-B output (panel or bridge). + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: ti,sn65dsi83 + then: + properties: + ports: + properties: + port@1: false + port@3: false + + - if: + properties: + compatible: + contains: + const: ti,sn65dsi84 + then: + properties: + ports: + properties: + port@1: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi83"; + reg = <0x2d>; + + enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vcc-supply = <®_sn65dsi83_1v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&dsi0_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt deleted file mode 100644 index 8ec4a7f2623a..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt +++ /dev/null @@ -1,87 +0,0 @@ -SN65DSI86 DSI to eDP bridge chip --------------------------------- - -This is the binding for Texas Instruments SN65DSI86 bridge. -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf - -Required properties: -- compatible: Must be "ti,sn65dsi86" -- reg: i2c address of the chip, 0x2d as per datasheet -- enable-gpios: gpio specification for bridge_en pin (active high) - -- vccio-supply: A 1.8V supply that powers up the digital IOs. -- vpll-supply: A 1.8V supply that powers up the displayport PLL. -- vcca-supply: A 1.2V supply that powers up the analog circuits. -- vcc-supply: A 1.2V supply that powers up the digital core. - -Optional properties: -- interrupts-extended: Specifier for the SN65DSI86 interrupt line. - -- gpio-controller: Marks the device has a GPIO controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../../gpio/gpio.txt for more information. -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of - the cell formats. - -- clock-names: should be "refclk" -- clocks: Specification for input reference clock. The reference - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. - -- data-lanes: See ../../media/video-interface.txt -- lane-polarities: See ../../media/video-interface.txt - -- suspend-gpios: specification for GPIO1 pin on bridge (active low) - -Required nodes: -This device has two video ports. Their connections are modelled using the -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for DSI input -- Video port 1 for eDP output - -Example -------- - -edp-bridge@2d { - compatible = "ti,sn65dsi86"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; - - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; - - vccio-supply = <&pm8916_l17>; - vcca-supply = <&pm8916_l6>; - vpll-supply = <&pm8916_l17>; - vcc-supply = <&pm8916_l6>; - - clock-names = "refclk"; - clocks = <&input_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - edp_bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - port@1 { - reg = <1>; - - edp_bridge_out: endpoint { - data-lanes = <2 1 3 0>; - lane-polarities = <0 1 0 1>; - remote-endpoint = <&edp_panel_in>; - }; - }; - }; -} diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml new file mode 100644 index 000000000000..6ec6d287bff4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SN65DSI86 DSI to eDP bridge chip + +maintainers: + - Sandeep Panda <spanda@codeaurora.org> + +description: | + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. + https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf + +properties: + compatible: + const: ti,sn65dsi86 + + reg: + enum: [ 0x2c, 0x2d ] + + enable-gpios: + maxItems: 1 + description: GPIO specifier for bridge_en pin (active high). + + suspend-gpios: + maxItems: 1 + description: GPIO specifier for GPIO1 pin on bridge (active low). + + no-hpd: + type: boolean + description: + Set if the HPD line on the bridge isn't hooked up to anything or is + otherwise unusable. + + vccio-supply: + description: A 1.8V supply that powers the digital IOs. + + vpll-supply: + description: A 1.8V supply that powers the DisplayPort PLL. + + vcca-supply: + description: A 1.2V supply that powers the analog circuits. + + vcc-supply: + description: A 1.2V supply that powers the digital core. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + Clock specifier for input reference clock. The reference clock rate must + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. + + clock-names: + const: refclk + + gpio-controller: true + '#gpio-cells': + const: 2 + description: + First cell is pin number, second cell is flags. GPIO pin numbers are + 1-based to match the datasheet. See ../../gpio/gpio.txt for more + information. + + '#pwm-cells': + const: 1 + description: See ../../pwm/pwm.yaml for description of the cell formats. + + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Video port for eDP output (panel or connector). + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 1 logical lane the bridge supports routing + to either port 0 or port 1. Port 0 is suggested. + + - minItems: 2 + maxItems: 2 + uniqueItems: true + items: + enum: + - 0 + - 1 + description: + If you have 2 logical lanes the bridge supports + reordering but only on physical ports 0 and 1. + + - minItems: 4 + maxItems: 4 + uniqueItems: true + items: + enum: + - 0 + - 1 + - 2 + - 3 + description: + If you have 4 logical lanes the bridge supports + reordering in any way. + + lane-polarities: + minItems: 1 + maxItems: 4 + items: + enum: + - 0 + - 1 + + dependencies: + lane-polarities: [data-lanes] + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vccio-supply + - vpll-supply + - vcca-supply + - vcc-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; + }; + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; + + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + + vccio-supply = <&pm8916_l17>; + vcca-supply = <&pm8916_l6>; + vpll-supply = <&pm8916_l17>; + vcc-supply = <&pm8916_l6>; + + clock-names = "refclk"; + clocks = <&input_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + edp_bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + edp_bridge_out: endpoint { + data-lanes = <2 1 3 0>; + lane-polarities = <0 1 0 1>; + remote-endpoint = <&edp_panel_in>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt deleted file mode 100644 index 5ff4f64ef8e8..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt +++ /dev/null @@ -1,66 +0,0 @@ -TFP410 DPI to DVI encoder -========================= - -Required properties: -- compatible: "ti,tfp410" - -Optional properties: -- powerdown-gpios: power-down gpio -- reg: I2C address. If and only if present the device node should be placed - into the I2C controller node where the TFP410 I2C is connected to. -- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured - through th DK[3:1] pins. This property shall be present only if the TFP410 - is not connected through I2C. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in [1]. Each port node shall have a single endpoint. - -- Port 0 is the DPI input port. Its endpoint subnode shall contain a - pclk-sample and bus-width property and a remote-endpoint property as specified - in [1]. - - If pclk-sample is not defined, pclk-sample = 0 should be assumed for - backward compatibility. - - If bus-width is not defined then bus-width = 24 should be assumed for - backward compatibility. - bus-width = 24: 24 data lines are connected and single-edge mode - bus-width = 12: 12 data lines are connected and dual-edge mode - -- Port 1 is the DVI output port. Its endpoint subnode shall contain a - remote-endpoint property is specified in [1]. - -[1] Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example -------- - -tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - ti,deskew = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - pclk-sample = <1>; - bus-width = <24>; - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml new file mode 100644 index 000000000000..4c5dd8ec2951 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TFP410 DPI to DVI encoder + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ti.com> + - Jyri Sarha <jsarha@ti.com> + +properties: + compatible: + const: ti,tfp410 + + reg: + description: I2C address of the device. + maxItems: 1 + + powerdown-gpios: + maxItems: 1 + + ti,deskew: + description: + Data de-skew value in 350ps increments, from 0 to 7, as configured + through the DK[3:1] pins. The de-skew multiplier is computed as + (DK[3:1] - 4), so it ranges from -4 to 3. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DPI input port. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + pclk-sample: + description: + Endpoint sampling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + + bus-width: + description: + Endpoint bus width. + enum: + - 12 # 12 data lines connected and dual-edge mode + - 24 # 24 data lines connected and single-edge mode + default: 24 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DVI output port. + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +if: + required: + - reg +then: + properties: + ti,deskew: false +else: + required: + - ti,deskew + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + tfp410: encoder { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + ti,deskew = <3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tfp410_in: endpoint { + pclk-sample = <1>; + bus-width = <24>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt deleted file mode 100644 index df3d7c1ac09e..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ti,ths813x.txt +++ /dev/null @@ -1,51 +0,0 @@ -THS8134 and THS8135 Video DAC ------------------------------ - -This is the binding for Texas Instruments THS8134, THS8134A, THS8134B and -THS8135 Video DAC bridges. - -Required properties: - -- compatible: Must be one of - "ti,ths8134" - "ti,ths8134a," "ti,ths8134" - "ti,ths8134b", "ti,ths8134" - "ti,ths8135" - -Required nodes: - -This device has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for RGB input -- Video port 1 for VGA output - -Example -------- - -vga-bridge { - compatible = "ti,ths8135"; - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_bridge_in: endpoint { - remote-endpoint = <&lcdc_out_vga>; - }; - }; - - port@1 { - reg = <1>; - - vga_bridge_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml new file mode 100644 index 000000000000..6c1de0b21722 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. + +properties: + compatible: + enum: + - toshiba,tc358762 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + reset-gpios: + maxItems: 1 + + vddc-supply: + description: Regulator for 1.2V internal core power. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - vddc-supply + - ports + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358762"; + vddc-supply = <&vcc_1v2_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt deleted file mode 100644 index 8f9abf28a8fa..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt +++ /dev/null @@ -1,35 +0,0 @@ -TC358764 MIPI-DSI to LVDS panel bridge - -Required properties: - - compatible: "toshiba,tc358764" - - reg: the virtual channel number of a DSI peripheral - - vddc-supply: core voltage supply, 1.2V - - vddio-supply: I/O voltage supply, 1.8V or 3.3V - - vddlvds-supply: LVDS1/2 voltage supply, 3.3V - - reset-gpios: a GPIO spec for the reset pin - -The device node can contain following 'port' child nodes, -according to the OF graph bindings defined in [1]: - 0: DSI Input, not required, if the bridge is DSI controlled - 1: LVDS Output, mandatory - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - bridge@0 { - reg = <0>; - compatible = "toshiba,tc358764"; - vddc-supply = <&vcc_1v2_reg>; - vddio-supply = <&vcc_1v8_reg>; - vddlvds-supply = <&vcc_3v3_reg>; - reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - lvds_ep: endpoint { - remote-endpoint = <&panel_ep>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml new file mode 100644 index 000000000000..866607400514 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358764 MIPI-DSI to LVDS bridge + +maintainers: + - Andrzej Hajda <andrzej.hajda@intel.com> + +properties: + compatible: + const: toshiba,tc358764 + + reg: + description: Virtual channel number of a DSI peripheral + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vddc-supply: + description: Core voltage supply, 1.2V + + vddio-supply: + description: I/O voltage supply, 1.8V or 3.3V + + vddlvds-supply: + description: LVDS1/2 voltage supply, 3.3V + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input, if the bridge DSI controlled + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output (panel or connector). + + required: + - port@1 + +required: + - compatible + - reg + - reset-gpios + - vddc-supply + - vddio-supply + - vddlvds-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "toshiba,tc358764"; + reg = <0>; + + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + lvds_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt deleted file mode 100644 index 583c5e9dbe6b..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt +++ /dev/null @@ -1,54 +0,0 @@ -Toshiba TC358767 eDP bridge bindings - -Required properties: - - compatible: "toshiba,tc358767" - - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins - - clock-names: should be "ref" - - clocks: OF device-tree clock specification for refclk input. The reference - clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. - -Optional properties: - - shutdown-gpios: OF device-tree gpio specification for SD pin - (active high shutdown input) - - reset-gpios: OF device-tree gpio specification for RSTX pin - (active low system reset) - - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1) - - ports: the ports node can contain video interface port nodes to connect - to a DPI/DSI source and to an eDP/DP sink according to [1][2]: - - port@0: DSI input port - - port@1: DPI input port - - port@2: eDP/DP output port - -[1]: Documentation/devicetree/bindings/graph.txt -[2]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - edp-bridge@68 { - compatible = "toshiba,tc358767"; - reg = <0x68>; - shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - clock-names = "ref"; - clocks = <&edp_refclk>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - bridge_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@2 { - reg = <2>; - - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml new file mode 100644 index 000000000000..ae894d996d21 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge + +maintainers: + - Andrey Gusakov <andrey.gusakov@cogentembedded.com> + +description: | + The TC358767/TC358867/TC9595 is bridge device which + converts DSI/DPI to eDP/DP . + +properties: + compatible: + oneOf: + - items: + - enum: + - toshiba,tc358867 + - toshiba,tc9595 + - const: toshiba,tc358767 + - const: toshiba,tc358767 + + reg: + enum: + - 0x68 + - 0x0f + description: | + i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins + + clock-names: + const: ref + + clocks: + maxItems: 1 + description: | + OF device-tree clock specification for refclk input. The reference. + clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz. + + shutdown-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for SD pin(active high shutdown input) + + reset-gpios: + maxItems: 1 + description: | + OF device-tree gpio specification for RSTX pin(active low system reset) + + interrupts: + maxItems: 1 + + toshiba,hpd-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + description: TC358767 GPIO pin number to which HPD is connected to (0 or 1) + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: | + DSI input port. The remote endpoint phandle should be a + reference to a valid DSI output endpoint node + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + DPI input/output port. The remote endpoint phandle should be a + reference to a valid DPI output or input endpoint node. + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + eDP/DP output port. The remote endpoint phandle should be a + reference to a valid eDP panel input endpoint node. This port is + optional, treated as DP panel if not defined + + oneOf: + - required: + - port@0 + - required: + - port@1 + + +required: + - compatible + - reg + - clock-names + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* DPI input and eDP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_0: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@2 { + reg = <2>; + + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + - | + /* DPI input and DP output */ + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + edp-bridge@68 { + compatible = "toshiba,tc358767"; + reg = <0x68>; + shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + clock-names = "ref"; + clocks = <&edp_refclk>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + bridge_in_1: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index c036a75db8f7..779d8c57f854 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -42,65 +42,31 @@ properties: const: refclk ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Video port for RGB input properties: - reg: - const: 0 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: | Video port for DSI output (panel or connector). - properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 @@ -112,17 +78,20 @@ required: - vddio-supply - ports -additionalProperties: false +allOf: + - $ref: ../dsi-controller.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; - dsi_bridge: dsi-bridge@e { + dsi_bridge: dsi@e { compatible = "toshiba,tc358768"; reg = <0xe>; @@ -156,4 +125,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 000000000000..d879c700594a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC358775 DSI to LVDS bridge + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +description: | + This binding supports DSI to LVDS bridge TC358775 + + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane. + Video frame size: + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel + limited by 135 MHz LVDS speed + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display + panel, limited by 270 MHz LVDS speed. + +properties: + compatible: + const: toshiba,tc358775 + + reg: + maxItems: 1 + description: i2c address of the bridge, 0x0f + + vdd-supply: + description: 1.2V LVDS Power Supply + + vddio-supply: + description: 1.8V IO Power Supply + + stby-gpios: + maxItems: 1 + description: Standby pin, Low active + + reset-gpios: + maxItems: 1 + description: Hardware reset, Low active + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: | + DSI Input. The remote endpoint phandle should be a + reference to a valid mipi_dsi_host device node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for LVDS output (panel or connector). + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for Dual link LVDS output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + - stby-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + /* For single-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_test: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + lvds_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&d2l_in_test>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + - | + /* For dual-link LVDS display panel */ + + i2c@78b8000 { + /* On High speed expansion */ + label = "HS-I2C2"; + reg = <0x078b8000 0x500>; + clock-frequency = <400000>; /* fastmode operation */ + #address-cells = <1>; + #size-cells = <0>; + + tc_bridge_dual: bridge@f { + compatible = "toshiba,tc358775"; + reg = <0x0f>; + + vdd-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>; + reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + d2l_in_dual: endpoint { + remote-endpoint = <&dsi0_out_dual>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + + port@2 { + reg = <2>; + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + + dsi@1a98000 { + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + dsi0_out_dual: endpoint { + remote-endpoint = <&d2l_in_dual>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; +... |