diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
44 files changed, 1436 insertions, 202 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml index f201ae4af4fb..2cef25215798 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -55,6 +55,27 @@ properties: - port@0 - port@1 + vcchdmipll-supply: + description: A 1.8V supply that powers the HDMI PLL. + + vcchdmitx-supply: + description: A 1.8V supply that powers the HDMI TX part. + + vcclvdspll-supply: + description: A 1.8V supply that powers the LVDS PLL. + + vcclvdstx-supply: + description: A 1.8V supply that powers the LVDS TX part. + + vccmipirx-supply: + description: A 1.8V supply that powers the MIPI RX part. + + vccsysclk-supply: + description: A 1.8V supply that powers the SYSCLK. + + vdd-supply: + description: A 1.8V supply that powers the digital part. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml index 21d995f29a1e..b8e9cf6ce4e6 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -29,19 +29,22 @@ properties: audio-ports: description: - Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst). + Array of 2 values per DAI (Documentation/sound/soc/dai.rst). The implementation allows one or two DAIs. If two DAIs are defined, they must be of different type. $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 2 items: - minItems: 1 items: - description: | The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S (see include/dt-bindings/display/tda998x.h). + enum: [ 1, 2 ] - description: The second value defines the tda998x AP_ENA reg content when the DAI in question is used. + maximum: 0xff '#sound-dai-cells': enum: [ 0, 1 ] diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 7fd42c8fdc32..b4c28e96dd55 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -24,6 +24,7 @@ properties: - enum: - mediatek,mt8173-disp-aal - mediatek,mt8183-disp-aal + - mediatek,mt8195-mdp3-aal - items: - enum: - mediatek,mt2712-disp-aal diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index f21e44092043..b886ca0d89ea 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2701-disp-color - mediatek,mt8167-disp-color - mediatek,mt8173-disp-color + - mediatek,mt8195-mdp3-color - items: - enum: - mediatek,mt7623-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index ed24b617090b..8611319bed2e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -34,6 +34,10 @@ properties: - enum: - mediatek,mt6795-dsi - const: mediatek,mt8173-dsi + - items: + - enum: + - mediatek,mt8195-dsi + - const: mediatek,mt8183-dsi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml index 801fa66ae615..677882348ede 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -23,7 +23,11 @@ description: properties: compatible: - const: mediatek,mt8195-disp-ethdr + oneOf: + - const: mediatek,mt8195-disp-ethdr + - items: + - const: mediatek,mt8188-disp-ethdr + - const: mediatek,mt8195-disp-ethdr reg: maxItems: 7 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml deleted file mode 100644 index dd12e2ff685c..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml +++ /dev/null @@ -1,88 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: MediaTek MDP RDMA - -maintainers: - - Chun-Kuang Hu <chunkuang.hu@kernel.org> - - Philipp Zabel <p.zabel@pengutronix.de> - -description: - The MediaTek MDP RDMA stands for Read Direct Memory Access. - It provides real time data to the back-end panel driver, such as DSI, - DPI and DP_INTF. - It contains one line buffer to store the sufficient pixel data. - RDMA device node must be siblings to the central MMSYS_CONFIG node. - For a description of the MMSYS_CONFIG binding, see - Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details. - -properties: - compatible: - const: mediatek,mt8195-vdo1-rdma - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - clocks: - items: - - description: RDMA Clock - - iommus: - maxItems: 1 - - mediatek,gce-client-reg: - description: - The register of display function block to be set by gce. There are 4 arguments, - such as gce node, subsys id, offset and register size. The subsys id that is - mapping to the register of display function blocks is defined in the gce header - include/dt-bindings/gce/<chip>-gce.h of each chips. - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - items: - - description: phandle of GCE - - description: GCE subsys id - - description: register offset - - description: register size - maxItems: 1 - -required: - - compatible - - reg - - power-domains - - clocks - - iommus - - mediatek,gce-client-reg - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/mt8195-clk.h> - #include <dt-bindings/power/mt8195-power.h> - #include <dt-bindings/gce/mt8195-gce.h> - #include <dt-bindings/memory/mt8195-memory-port.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - rdma@1c104000 { - compatible = "mediatek,mt8195-vdo1-rdma"; - reg = <0 0x1c104000 0 0x1000>; - interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; - power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; - iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; - mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index eead5cb8636e..dae839279950 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -24,9 +24,13 @@ properties: - enum: - mediatek,mt8173-disp-merge - mediatek,mt8195-disp-merge + - mediatek,mt8195-mdp3-merge - items: - const: mediatek,mt6795-disp-merge - const: mediatek,mt8173-disp-merge + - items: + - const: mediatek,mt8188-disp-merge + - const: mediatek,mt8195-disp-merge reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 3e1069b00b56..c471a181d125 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8173-disp-ovl - mediatek,mt8183-disp-ovl - mediatek,mt8192-disp-ovl + - mediatek,mt8195-mdp3-ovl - items: - enum: - mediatek,mt7623-disp-ovl diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 000000000000..be07bbdc54e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Padding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Padding provides ability to add pixels to width and height of a layer with + specified colors. Due to hardware design, Mixer in VDOSYS1 requires + width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, + we need Padding to deal with odd width. + Please notice that even if the Padding is in bypass mode, settings in + register must be cleared to 0, or undefined behaviors could happen. + +properties: + compatible: + enum: + - mediatek,mt8188-disp-padding + - mediatek,mt8195-mdp3-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Padding's clocks + + mediatek,gce-client-reg: + description: + GCE (Global Command Engine) is a multi-core micro processor that helps + its clients to execute commands without interrupting CPU. This property + describes GCE client's information that is composed by 4 fields. + 1. Phandle of the GCE (there may be several GCE processors) + 2. Sub-system ID defined in the dt-binding like a user ID + (Please refer to include/dt-bindings/gce/<chip>-gce.h) + 3. Offset from base address of the subsys you are at + 4. Size of the register the client needs + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: Phandle of the GCE + - description: Subsys ID defined in the dt-binding + - description: Offset from base address of the subsys + - description: Size of register + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + padding0: padding@1c11d000 { + compatible = "mediatek,mt8188-disp-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index a8a5c9608598..e4affc854f3d 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -23,6 +23,7 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-split + - mediatek,mt8195-mdp3-split - items: - const: mediatek,mt6795-disp-split - const: mediatek,mt8173-disp-split @@ -38,6 +39,21 @@ properties: the power controller specified by phandle. See Documentation/devicetree/bindings/power/power-domain.yaml for details. + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + clocks: items: - description: SPLIT Clock @@ -48,6 +64,17 @@ required: - power-domains - clocks +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-split + + then: + required: + - mediatek,gce-client-reg + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index dbe398f84ffb..ae53cbfb2193 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -26,8 +26,10 @@ properties: - qcom,sc8280xp-edp - qcom,sdm845-dp - qcom,sm8350-dp + - qcom,sm8650-dp - items: - enum: + - qcom,sm8150-dp - qcom,sm8250-dp - qcom,sm8450-dp - qcom,sm8550-dp diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index c6dbab65d5f7..4219936eda5a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -25,6 +25,7 @@ properties: - qcom,sc7180-dsi-ctrl - qcom,sc7280-dsi-ctrl - qcom,sdm660-dsi-ctrl + - qcom,sdm670-dsi-ctrl - qcom,sdm845-dsi-ctrl - qcom,sm6115-dsi-ctrl - qcom,sm6125-dsi-ctrl @@ -35,6 +36,7 @@ properties: - qcom,sm8350-dsi-ctrl - qcom,sm8450-dsi-ctrl - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl - const: qcom,mdss-dsi-ctrl - enum: - qcom,dsi-ctrl-6g-qcm2290 @@ -333,6 +335,7 @@ allOf: - qcom,sm8350-dsi-ctrl - qcom,sm8450-dsi-ctrl - qcom,sm8550-dsi-ctrl + - qcom,sm8650-dsi-ctrl then: properties: clocks: diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index dd6619555a12..7e764eac3ef3 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -22,6 +22,7 @@ properties: - qcom,sm8350-dsi-phy-5nm - qcom,sm8450-dsi-phy-5nm - qcom,sm8550-dsi-phy-4nm + - qcom,sm8650-dsi-phy-4nm reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml index f69196e4cc76..c6305a6e0334 100644 --- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml @@ -61,17 +61,27 @@ properties: ranges: true + # This is not a perfect description, but it's impossible to discern and match + # the entries like we do with interconnect-names interconnects: minItems: 1 items: - description: Interconnect path from mdp0 (or a single mdp) port to the data bus - description: Interconnect path from mdp1 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - minItems: 1 - items: - - const: mdp0-mem - - const: mdp1-mem + oneOf: + - minItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg + + - minItems: 2 + items: + - const: mdp0-mem + - const: mdp1-mem + - const: cpu-cfg resets: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml index 5ad155612b6c..f0cdb5422688 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 2 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -56,7 +60,9 @@ patternProperties: properties: compatible: - const: qcom,dsi-ctrl-6g-qcm2290 + items: + - const: qcom,qcm2290-dsi-ctrl + - const: qcom,mdss-dsi-ctrl "^phy@[0-9a-f]+$": type: object @@ -96,8 +102,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>, + <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; @@ -136,7 +144,8 @@ examples: }; dsi@5e94000 { - compatible = "qcom,dsi-ctrl-6g-qcm2290"; + compatible = "qcom,qcm2290-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; reg = <0x05e94000 0x400>; reg-names = "dsi_ctrl"; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml index 3432a2407caa..7a0555b15ddf 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 1 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -106,8 +110,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x2>; ranges; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml index bbb727831fca..2947f27e0585 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml @@ -36,10 +36,14 @@ properties: maxItems: 1 interconnects: - maxItems: 1 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 1 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": @@ -118,8 +122,10 @@ examples: interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x900 0x402>; ranges; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml new file mode 100644 index 000000000000..7dc269322b8e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM670 Display MDSS + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: + SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sdm670-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: core + + iommus: + maxItems: 2 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sdm670-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,sdm670-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,dsi-phy-10nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sdm670-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sdm670-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SDM670_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae94400 0x200>, + <0x0ae94600 0x280>, + <0x0ae94a00 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + + dsi@ae96000 { + compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0x0ae96400 0x200>, + <0x0ae96600 0x280>, + <0x0ae96a00 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + vdds-supply = <&vreg_dsi_phy>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml index b917064bdf33..dc11fd421a27 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml @@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - const: qcom,sdm845-dpu + enum: + - qcom,sdm670-dpu + - qcom,sdm845-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml index dde5c2acead5..309de1953c88 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml @@ -29,6 +29,16 @@ properties: iommus: maxItems: 2 + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + patternProperties: "^display-controller@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml index 671c2c2aa896..3deb9dc81c9c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml index e1dcb453762e..c9ba1fae8042 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml index b15c3950f09d..8e8a288d318c 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml @@ -35,10 +35,14 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus interconnect-names: - maxItems: 2 + items: + - const: mdp0-mem + - const: cpu-cfg patternProperties: "^display-controller@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml index a2a8be7f64a9..c0d6a4fdff97 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml @@ -69,7 +69,7 @@ patternProperties: properties: compatible: - const: qcom,dsi-phy-7nm + const: qcom,dsi-phy-7nm-8150 unevaluatedProperties: false @@ -247,7 +247,7 @@ examples: }; dsi0_phy: phy@ae94400 { - compatible = "qcom,dsi-phy-7nm"; + compatible = "qcom,dsi-phy-7nm-8150"; reg = <0x0ae94400 0x200>, <0x0ae94600 0x280>, <0x0ae94900 0x260>; @@ -318,7 +318,7 @@ examples: }; dsi1_phy: phy@ae96400 { - compatible = "qcom,dsi-phy-7nm"; + compatible = "qcom,dsi-phy-7nm-8150"; reg = <0x0ae96400 0x200>, <0x0ae96600 0x280>, <0x0ae96900 0x260>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml index 994975909fea..51368cda7b2f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml @@ -52,6 +52,16 @@ patternProperties: compatible: const: qcom,sm8250-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sm8250-dp + - const: qcom,sm8350-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml index 001b26e65301..747a2e9665f4 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml @@ -30,10 +30,10 @@ properties: maxItems: 1 interconnects: - maxItems: 2 + maxItems: 3 interconnect-names: - maxItems: 2 + maxItems: 3 patternProperties: "^display-controller@[0-9a-f]+$": @@ -91,9 +91,12 @@ examples: reg = <0x0ae00000 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, - <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml new file mode 100644 index 000000000000..a01d15a03317 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display DPU + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +$ref: /schemas/display/msm/dpu-common.yaml# + +properties: + compatible: + const: qcom,sm8650-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi + - description: Display MDSS ahb + - description: Display lut + - description: Display core + - description: Display vsync + + clock-names: + items: + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml new file mode 100644 index 000000000000..bd11119dc93d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml @@ -0,0 +1,328 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Display MDSS + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: + SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm8650-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dp + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm8650-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm8650-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + resets = <&dispcc_core_bcr>; + + power-domains = <&dispcc_gdsc>; + + clocks = <&gcc_ahb_clk>, + <&gcc_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi0_phy: phy@ae94400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x280>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + + dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispc_byte_clk>, + <&dispcc_intf_clk>, + <&dispcc_pclk>, + <&dispcc_esc_clk>, + <&dispcc_ahb_clk>, + <&gcc_bus_clk>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc_byte_clk>, + <&dispcc_pclk>; + assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: phy@ae96400 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae97000 0x200>, + <0x0ae97200 0x280>, + <0x0ae97500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc_iface_clk>, + <&rpmhcc_ref_clk>; + clock-names = "iface", "ref"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml new file mode 100644 index 000000000000..d13c4bd26de4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel + +maintainers: + - John Watts <contact@jookia.org> + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: fascontek,fs035vg158 + + spi-3wire: true + +required: + - compatible + - reg + - port + - power-supply + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "fascontek,fs035vg158"; + reg = <0>; + + spi-3wire; + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index ffb35288ffbb..916bb7f94206 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -23,6 +23,7 @@ properties: items: - enum: - hannstar,hsd060bhw4 + - powkiddy,x55-panel - const: himax,hx8394 reg: true @@ -31,6 +32,8 @@ properties: backlight: true + rotation: true + port: true vcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml new file mode 100644 index 000000000000..f4f91f93f490 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9805 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - giantplus,gpm1790a0 + - tianma,tm041xdhg01 + - const: ilitek,ili9805 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "giantplus,gpm1790a0", "ilitek,ili9805"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index e7ab6224b52e..b1e624be3e33 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -16,6 +16,7 @@ properties: compatible: items: - enum: + - ampire,am8001280g - bananapi,lhr050h41 - feixin,k101-im2byl02 - tdo,tl050hdv35 diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index ebdca5f5a001..7a55961e1a3d 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,16 +18,12 @@ properties: compatible: const: leadtek,ltk035c5444t - backlight: true - port: true - power-supply: true - reg: true - reset-gpios: true - spi-3wire: true required: - compatible + - reg + - port - power-supply - reset-gpios diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index cce775a87f87..7a634fbc465e 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -21,7 +21,7 @@ properties: - enum: - anbernic,rg351v-panel - anbernic,rg353p-panel - - anbernic,rg353v-panel + - powkiddy,rk2023-panel - const: newvision,nv3051d reg: true diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml index a5a596ff8e75..716ece5f3978 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml @@ -33,6 +33,8 @@ properties: # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel - auo,g133han01 + # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel + - auo,g156han04 # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel - auo,g185han01 # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 11422af3477e..634a10c6f2dd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -73,6 +73,8 @@ properties: - auo,t215hvn01 # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel - avic,tm070ddh03 + # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel + - boe,bp101wx1-100 # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel - boe,ev121wxm-n10-1850 # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel @@ -144,6 +146,8 @@ properties: - edt,etmv570g2dhu # E Ink VB3300-KCA - eink,vb3300-kca + # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel + - evervision,vgg644804 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml index 4dc0cd4a6a77..b348f5bf0a98 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml @@ -27,6 +27,7 @@ properties: compatible: items: - enum: + - anbernic,rg-arc-panel - densitron,dmt028vghmcmi-1a - elida,kd50t048a - techstar,ts8550b diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml new file mode 100644 index 000000000000..e5617d125567 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics R63353 based MIPI-DSI panels + +maintainers: + - Michael Trimarchi <michael@amarulasolutions.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls068b3sx02 + - const: syna,r63353 + + avdd-supply: true + dvdd-supply: true + reg: true + +required: + - compatible + - avdd-supply + - dvdd-supply + - reg + - reset-gpios + - port + - backlight + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls068b3sx02", "syna,r63353"; + reg = <0>; + avdd-supply = <&avdd_display>; + dvdd-supply = <&dvdd_display>; + reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */ + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt deleted file mode 100644 index cec21714f0e0..000000000000 --- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt +++ /dev/null @@ -1,49 +0,0 @@ -Rockchip specific extensions to the Innosilicon HDMI -================================ - -Required properties: -- compatible: - "rockchip,rk3036-inno-hdmi"; -- reg: - Physical base address and length of the controller's registers. -- clocks, clock-names: - Phandle to hdmi controller clock, name should be "pclk" -- interrupts: - HDMI interrupt number -- ports: - Contain one port node with endpoint definitions as defined in - Documentation/devicetree/bindings/graph.txt. -- pinctrl-0, pinctrl-name: - Switch the iomux of HPD/CEC pins to HDMI function. - -Example: -hdmi: hdmi@20034000 { - compatible = "rockchip,rk3036-inno-hdmi"; - reg = <0x20034000 0x4000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_HDMI>; - clock-names = "pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_ctl>; - - hdmi_in: port { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_lcdc: endpoint@0 { - reg = <0>; - remote-endpoint = <&lcdc_out_hdmi>; - }; - }; -}; - -&pinctrl { - hdmi { - hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, - <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - -}; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml new file mode 100644 index 000000000000..be78dcfa1c76 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Innosilicon HDMI controller + +maintainers: + - Sandy Huang <hjc@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3036-inno-hdmi + - rockchip,rk3128-inno-hdmi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: The HDMI controller main clock + - description: The HDMI PHY reference clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: ref + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a vop node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-0 + - pinctrl-names + - ports + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3036-inno-hdmi + + then: + properties: + power-domains: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3128-inno-hdmi + + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3036-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/rockchip.h> + hdmi: hdmi@20034000 { + compatible = "rockchip,rk3036-inno-hdmi"; + reg = <0x20034000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_HDMI>; + clock-names = "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_ctl>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; + + pinctrl { + hdmi { + hdmi_ctl: hdmi-ctl { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml index b60b90472d42..2531726af306 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -8,8 +8,8 @@ title: Rockchip SoC display controller (VOP2) description: VOP2 (Video Output Processor v2) is the display controller for the Rockchip - series of SoCs which transfers the image data from a video memory - buffer to an external LCD interface. + series of SoCs which transfers the image data from a video memory buffer to + an external LCD interface. maintainers: - Sandy Huang <hjc@rock-chips.com> @@ -20,6 +20,7 @@ properties: enum: - rockchip,rk3566-vop - rockchip,rk3568-vop + - rockchip,rk3588-vop reg: items: @@ -27,8 +28,8 @@ properties: Must contain one entry corresponding to the base address and length of the register space. - description: - Can optionally contain a second entry corresponding to - the CRTC gamma LUT address. + Can optionally contain a second entry corresponding to the CRTC gamma + LUT address. reg-names: items: @@ -41,45 +42,63 @@ properties: The VOP interrupt is shared by several interrupt sources, such as frame start (VSYNC), line flag and other status interrupts. + # See compatible-specific constraints below. clocks: + minItems: 5 items: - - description: Clock for ddr buffer transfer. - - description: Clock for the ahb bus to R/W the phy regs. + - description: Clock for ddr buffer transfer via axi. + - description: Clock for the ahb bus to R/W the regs. - description: Pixel clock for video port 0. - description: Pixel clock for video port 1. - description: Pixel clock for video port 2. + - description: Pixel clock for video port 3. + - description: Peripheral(vop grf/dsi) clock. clock-names: + minItems: 5 items: - const: aclk - const: hclk - const: dclk_vp0 - const: dclk_vp1 - const: dclk_vp2 + - const: dclk_vp3 + - const: pclk_vop rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle description: - Phandle to GRF regs used for misc control + Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI, + also used for query vop memory bisr enable status, etc. + + rockchip,vo1-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi + on rk3588. + + rockchip,vop-grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to PMU GRF used for query vop memory bisr status on rk3588. ports: $ref: /schemas/graph.yaml#/properties/ports - properties: - port@0: + patternProperties: + "^port@[0-3]$": $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP0 + description: Output endpoint of VP0/1/2/3. - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP1 + required: + - port@0 - port@2: - $ref: /schemas/graph.yaml#/properties/port - description: - Output endpoint of VP2 + unevaluatedProperties: false iommus: maxItems: 1 @@ -96,6 +115,49 @@ required: - clock-names - ports +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-vop + then: + properties: + clocks: + minItems: 7 + clock-names: + minItems: 7 + + ports: + required: + - port@0 + - port@1 + - port@2 + - port@3 + + required: + - rockchip,grf + - rockchip,vo1-grf + - rockchip,vop-grf + - rockchip,pmu + + else: + properties: + rockchip,vo1-grf: false + rockchip,vop-grf: false + rockchip,pmu: false + + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + + ports: + required: + - port@0 + - port@1 + - port@2 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml index 25d53fde92e1..597c9cc6a312 100644 --- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml @@ -85,7 +85,7 @@ allOf: clocks: minItems: 6 maxItems: 6 - regs: + reg: minItems: 2 maxItems: 2 @@ -99,7 +99,7 @@ allOf: clocks: minItems: 4 maxItems: 4 - regs: + reg: minItems: 2 maxItems: 2 @@ -116,7 +116,7 @@ allOf: clocks: minItems: 3 maxItems: 3 - regs: + reg: minItems: 1 maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index ae09cd3cbce1..b6767ef0d24d 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -23,6 +23,7 @@ properties: compatible: enum: - ti,am625-dss + - ti,am62a7,dss - ti,am65x-dss reg: @@ -87,6 +88,7 @@ properties: For AM65x DSS, the OLDI output port node from video port 1. For AM625 DSS, the internal DPI output port node from video port 1. + For AM62A7 DSS, the port is tied off inside the SoC. port@1: $ref: /schemas/graph.yaml#/properties/port @@ -108,6 +110,18 @@ properties: Input memory (from main memory to dispc) bandwidth limit in bytes per second +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62a7-dss + then: + properties: + ports: + properties: + port@0: false + required: - compatible - reg |