diff options
Diffstat (limited to 'Documentation/devicetree/bindings/crypto')
43 files changed, 1962 insertions, 872 deletions
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 8b9a8f337f16..0401c11da8d9 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Security System Device Tree Bindings +title: Allwinner A10 Security System maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -15,16 +15,18 @@ properties: oneOf: - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun5i-a13-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun6i-a31-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto - items: - - const: allwinner,sun7i-a20-crypto - - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun8i-a33-crypto - items: - - const: allwinner,sun8i-a33-crypto + - const: allwinner,sun8i-v3s-crypto + - const: allwinner,sun8i-a33-crypto reg: maxItems: 1 @@ -42,6 +44,16 @@ properties: - const: ahb - const: mod + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + resets: maxItems: 1 @@ -59,7 +71,9 @@ if: properties: compatible: contains: - const: allwinner,sun6i-a31-crypto + enum: + - allwinner,sun6i-a31-crypto + - allwinner,sun8i-a33-crypto then: required: diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml index 2c459b8c76ff..4287678aa79f 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -14,6 +14,7 @@ properties: enum: - allwinner,sun8i-h3-crypto - allwinner,sun8i-r40-crypto + - allwinner,sun20i-d1-crypto - allwinner,sun50i-a64-crypto - allwinner,sun50i-h5-crypto - allwinner,sun50i-h6-crypto @@ -29,16 +30,16 @@ properties: - description: Bus clock - description: Module clock - description: MBus clock + - description: TRNG clock (RC oscillator) minItems: 2 - maxItems: 3 clock-names: items: - const: bus - const: mod - const: ram + - const: trng minItems: 2 - maxItems: 3 resets: maxItems: 1 @@ -46,16 +47,29 @@ properties: if: properties: compatible: - items: - const: allwinner,sun50i-h6-crypto + enum: + - allwinner,sun20i-d1-crypto then: properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 +else: + if: + properties: + compatible: + const: allwinner,sun50i-h6-crypto + then: + properties: clocks: minItems: 3 + maxItems: 3 clock-names: minItems: 3 -else: - properties: + maxItems: 3 + else: + properties: clocks: maxItems: 2 clock-names: @@ -85,4 +99,3 @@ examples: clock-names = "bus", "mod"; resets = <&ccu RST_BUS_CE>; }; - diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml index 5becc60a0e28..948e11ebe4ee 100644 --- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -12,15 +12,15 @@ maintainers: properties: compatible: items: - - const: amlogic,gxl-crypto + - const: amlogic,gxl-crypto reg: maxItems: 1 interrupts: items: - - description: "Interrupt for flow 0" - - description: "Interrupt for flow 1" + - description: Interrupt for flow 0 + - description: Interrupt for flow 1 clocks: maxItems: 1 @@ -45,7 +45,7 @@ examples: crypto: crypto-engine@c883e000 { compatible = "amlogic,gxl-crypto"; - reg = <0x0 0xc883e000 0x0 0x36>; + reg = <0xc883e000 0x36>; interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc CLKID_BLKMV>; clock-names = "blkmv"; diff --git a/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml new file mode 100644 index 000000000000..9c97874a6dbd --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/arm,cryptocell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm TrustZone CryptoCell cryptographic engine + +maintainers: + - Gilad Ben-Yossef <gilad@benyossef.com> + +properties: + compatible: + enum: + - arm,cryptocell-713-ree + - arm,cryptocell-703-ree + - arm,cryptocell-712-ree + - arm,cryptocell-710-ree + - arm,cryptocell-630p-ree + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + arm_cc712: crypto@80000000 { + compatible = "arm,cryptocell-712-ree"; + reg = <0x80000000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt deleted file mode 100644 index 6130e6eb4af8..000000000000 --- a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt +++ /dev/null @@ -1,25 +0,0 @@ -Arm TrustZone CryptoCell cryptographic engine - -Required properties: -- compatible: Should be one of - - "arm,cryptocell-713-ree" - "arm,cryptocell-703-ree" - "arm,cryptocell-712-ree" - "arm,cryptocell-710-ree" - "arm,cryptocell-630p-ree" -- reg: Base physical address of the engine and length of memory mapped region. -- interrupts: Interrupt number for the device. - -Optional properties: -- clocks: Reference to the crypto engine clock. -- dma-coherent: Present if dma operations are coherent. - -Examples: - - arm_cc712: crypto@80000000 { - compatible = "arm,cryptocell-712-ree"; - interrupt-parent = <&intc>; - interrupts = < 0 30 4 >; - reg = < 0x80000000 0x10000 >; - - }; diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml new file mode 100644 index 000000000000..a772d232de09 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED HACE hash and crypto Hardware Accelerator Engines + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + +description: | + The Hash and Crypto Engine (HACE) is designed to accelerate the throughput + of hash data digest, encryption, and decryption. Basically, HACE can be + divided into two independently engines - Hash Engine and Crypto Engine. + +properties: + compatible: + enum: + - aspeed,ast2500-hace + - aspeed,ast2600-hace + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + hace: crypto@1e6d0000 { + compatible = "aspeed,ast2600-hace"; + reg = <0x1e6d0000 0x200>; + interrupts = <4>; + clocks = <&syscon ASPEED_CLK_GATE_YCLK>; + resets = <&syscon ASPEED_RESET_HACE>; + }; diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml new file mode 100644 index 000000000000..b18f178aac06 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + +description: + The ACRY ECDSA/RSA engines is designed to accelerate the throughput + of ECDSA/RSA signature and verification. Basically, ACRY can be + divided into two independent engines - ECC Engine and RSA Engine. + +properties: + compatible: + enum: + - aspeed,ast2600-acry + + reg: + items: + - description: acry base address & size + - description: acry sram base address & size + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + acry: crypto@1e6fa000 { + compatible = "aspeed,ast2600-acry"; + reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>; + interrupts = <160>; + clocks = <&syscon ASPEED_CLK_GATE_RSACLK>; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml new file mode 100644 index 000000000000..0b7383b3106b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-aes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: aes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + aes: crypto@e1810000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xe1810000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml new file mode 100644 index 000000000000..ee2ffb034325 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-sha + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sha_clk + + dmas: + maxItems: 1 + description: TX DMA Channel + + dma-names: + const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + sha: crypto@e1814000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xe1814000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml new file mode 100644 index 000000000000..3d6ed24b1b00 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-tdes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: tdes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + tdes: crypto@e2014000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xe2014000 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt deleted file mode 100644 index f2aab3dc2b52..000000000000 --- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Atmel HW cryptographic accelerators - -These are the HW cryptographic accelerators found on some Atmel products. - -* Advanced Encryption Standard (AES) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-aes". -- reg: Should contain AES registers location and length. -- interrupts: Should contain the IRQ line for the AES. -- dmas: List of two DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. - -Example: -aes@f8038000 { - compatible = "atmel,at91sam9g46-aes"; - reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; - dmas = <&dma1 2 18>, - <&dma1 2 19>; - dma-names = "tx", "rx"; - -* Triple Data Encryption Standard (Triple DES) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-tdes". -- reg: Should contain TDES registers location and length. -- interrupts: Should contain the IRQ line for the TDES. - -Optional properties: -- dmas: List of two DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. - -Example: -tdes@f803c000 { - compatible = "atmel,at91sam9g46-tdes"; - reg = <0xf803c000 0x100>; - interrupts = <44 4 0>; - dmas = <&dma1 2 20>, - <&dma1 2 21>; - dma-names = "tx", "rx"; -}; - -* Secure Hash Algorithm (SHA) - -Required properties: -- compatible : Should be "atmel,at91sam9g46-sha". -- reg: Should contain SHA registers location and length. -- interrupts: Should contain the IRQ line for the SHA. - -Optional properties: -- dmas: One DMA specifiers as described in - atmel-dma.txt and dma.txt files. -- dma-names: Contains one identifier string for each DMA specifier - in the dmas property. Only one "tx" string needed. - -Example: -sha@f8034000 { - compatible = "atmel,at91sam9g46-sha"; - reg = <0xf8034000 0x100>; - interrupts = <42 4 0>; - dmas = <&dma1 2 17>; - dma-names = "tx"; -}; diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml new file mode 100644 index 000000000000..b633b8d0e6f0 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SL3516 cryptographic offloader driver + +maintainers: + - Corentin Labbe <clabbe@baylibre.com> + +properties: + compatible: + enum: + - cortina,sl3516-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + + crypto@62000000 { + compatible = "cortina,sl3516-crypto"; + reg = <0x62000000 0x10000>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_SECURITY>; + clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml new file mode 100644 index 000000000000..e879bc0be8e2 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2008-2011 Freescale Semiconductor Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Secure Non-Volatile Storage (SNVS) + +maintainers: + - '"Horia Geantă" <horia.geanta@nxp.com>' + - Pankaj Gupta <pankaj.gupta@nxp.com> + - Gaurav Jain <gaurav.jain@nxp.com> + +description: + Node defines address range and the associated interrupt for the SNVS function. + This function monitors security state information & reports security + violations. This also included rtc, system power off and ON/OFF key. + +properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v4.0-mon + - const: syscon + - const: simple-mfd + - items: + - const: fsl,sec-v5.0-mon + - const: fsl,sec-v4.0-mon + - items: + - enum: + - fsl,sec-v5.3-mon + - fsl,sec-v5.4-mon + - const: fsl,sec-v5.0-mon + - const: fsl,sec-v4.0-mon + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + snvs-rtc-lp: + type: object + additionalProperties: false + description: + Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node + + properties: + compatible: + const: fsl,sec-v4.0-mon-rtc-lp + + clocks: + maxItems: 1 + + clock-names: + const: snvs-rtc + + interrupts: + # VFxxx has only one. What is the 2nd one? + minItems: 1 + maxItems: 2 + + regmap: + description: Parent node containing registers + $ref: /schemas/types.yaml#/definitions/phandle + + offset: + description: LP register offset + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x34 + + required: + - compatible + - interrupts + - regmap + + snvs-powerkey: + type: object + additionalProperties: false + description: + The snvs-pwrkey is designed to enable POWER key function which controlled + by SNVS ONOFF, the driver can report the status of POWER key and wakeup + system if pressed after system suspend. + + properties: + compatible: + const: fsl,sec-v4.0-pwrkey + + clocks: + maxItems: 1 + + clock-names: + const: snvs-pwrkey + + interrupts: + maxItems: 1 + + regmap: + description: Parent node containing registers + $ref: /schemas/types.yaml#/definitions/phandle + + wakeup-source: true + + linux,keycode: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 116 + deprecated: true + + linux,keycodes: + maxItems: 1 + default: 116 + + required: + - compatible + - interrupts + - regmap + + snvs-lpgpr: + $ref: /schemas/nvmem/snvs-lpgpr.yaml# + + snvs-poweroff: + description: + The SNVS could drive signal to PMIC to turn off system power by setting + SNVS_LP LPCR register. + $ref: /schemas/power/reset/syscon-poweroff.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx7d-clock.h> + + sec_mon: sec-mon@314000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x314000 0x1000>; + + snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&sec_mon>; + offset = <0x34>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-rtc"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&sec_mon>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <116>; /* KEY_POWER */ + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml new file mode 100644 index 000000000000..0a9ed2848b7c --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml @@ -0,0 +1,266 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2008-2011 Freescale Semiconductor Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SEC 4 + +maintainers: + - '"Horia Geantă" <horia.geanta@nxp.com>' + - Pankaj Gupta <pankaj.gupta@nxp.com> + - Gaurav Jain <gaurav.jain@nxp.com> + +description: | + NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator + Accelerator and Assurance Module (CAAM). + + SEC 4 h/w can process requests from 2 types of sources. + 1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). + 2. Job Rings (HW interface between cores & SEC 4 registers). + + High Speed Data Path Configuration: + + HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts + such as the P4080. The number of simultaneous dequeues the QI can make is + equal to the number of Descriptor Controller (DECO) engines in a particular + SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus + dequeue from 5 subportals simultaneously. + + Job Ring Data Path Configuration: + + Each JR is located on a separate 4k page, they may (or may not) be made visible + in the memory partition devoted to a particular core. The P4080 has 4 JRs, so + up to 4 JRs can be configured; and all 4 JRs process requests in parallel. + +properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4 + - const: fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - items: + - enum: + - fsl,imx6ul-caam + - fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - const: fsl,sec-v4.0 + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + '#address-cells': + enum: [1, 2] + + '#size-cells': + enum: [1, 2] + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: [mem, aclk, ipg, emi_slow] + + dma-coherent: true + + interrupts: + maxItems: 1 + + fsl,sec-era: + description: Defines the 'ERA' of the SEC device. + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '^jr@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Job Ring (JR) Node. Defines data processing interface to SEC 4 across the + peripheral bus for purposes of processing cryptographic descriptors. The + specified address range can be made visible to one (or more) cores. The + interrupt defined for this node is controlled within the address range of + this node. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-job-ring + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - items: + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - const: fsl,sec-v4.0-job-ring + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the ppid-to-liodn + table that specifies the PPID to LIODN mapping. Needed if the PAMU is + used. Value is a 12 bit value where value is a LIODN ID for this JR. + This property is normally set by boot firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + '^rtic@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Node. Defines a register space that + contains up to 5 sets of addresses and their lengths (sizes) that will be + checked at run time. After an initial hash result is calculated, these + addresses are checked by HW to monitor any change. If any memory is + modified, a Security Violation is triggered (see SNVS definition). + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic + - const: fsl,sec-v5.0-rtic + - const: fsl,sec-v4.0-rtic + - const: fsl,sec-v4.0-rtic + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + patternProperties: + '^rtic-[a-z]@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Memory Node defines individual RTIC + memory regions that are used to perform run-time integrity check of + memory areas that should not modified. The node defines a register + that contains the memory address & length (combined) and a second + register that contains the hash result in big endian format. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic-memory + - const: fsl,sec-v5.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + + reg: + items: + - description: RTIC memory address + - description: RTIC hash result + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the + ppid-to-liodn table that specifies the PPID to LIODN mapping. + Needed if the PAMU is used. Value is a 12 bit value where value + is a LIODN ID for this JR. This property is normally set by boot + firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + fsl,rtic-region: + description: + Specifies the HW address (36 bit address) for this region + followed by the length of the HW partition to be checked; + the address is represented as a 64 bit quantity followed + by a 32 bit length. + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2>; + + jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2>; + }; + + jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2>; + }; + + jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2>; + }; + + jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20>, <0x100 0x80>; + }; + + rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20>, <0x200 0x80>; + }; + + rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20>, <0x300 0x80>; + }; + + rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20>, <0x500 0x80>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt deleted file mode 100644 index 513499fcdb5b..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt +++ /dev/null @@ -1,18 +0,0 @@ -Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 . - -Required properties: -- compatible : Should be "fsl,<soc>-dcp" -- reg : Should contain MXS DCP registers location and length -- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ - must be supplied, optionally Secure IRQ can be present, but - is currently not implemented and not used. -- clocks : Clock reference (only required on some SOCs: 6ull and 6sll). -- clock-names : Must be "dcp". - -Example: - -dcp: crypto@80028000 { - compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; - reg = <0x80028000 0x2000>; - interrupts = <52 53>; -}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml new file mode 100644 index 000000000000..8dd36c2f76fd --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-dcp + - fsl,imx28-dcp + - items: + - enum: + - fsl,imx6sl-dcp + - fsl,imx6ull-dcp + - const: fsl,imx28-dcp + + reg: + maxItems: 1 + + interrupts: + description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but is currently + not implemented and not used. + items: + - description: MXS DCP VMI interrupt + - description: MXS DCP DCP interrupt + - description: MXS DCP secure interrupt + minItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: dcp + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + crypto@80028000 { + compatible = "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <53>, <54>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt deleted file mode 100644 index db690b10e582..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt +++ /dev/null @@ -1,15 +0,0 @@ -Freescale SAHARA Cryptographic Accelerator included in some i.MX chips. -Currently only i.MX27 and i.MX53 are supported. - -Required properties: -- compatible : Should be "fsl,<soc>-sahara" -- reg : Should contain SAHARA registers location and length -- interrupts : Should contain SAHARA interrupt number - -Example: - -sah: crypto@10025000 { - compatible = "fsl,imx27-sahara"; - reg = < 0x10025000 0x800>; - interrupts = <75>; -}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml new file mode 100644 index 000000000000..41df80bcdcd9 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SAHARA Cryptographic Accelerator + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + enum: + - fsl,imx27-sahara + - fsl,imx53-sahara + + reg: + maxItems: 1 + + interrupts: + items: + - description: SAHARA Interrupt for Host 0 + - description: SAHARA Interrupt for Host 1 + minItems: 1 + + clocks: + items: + - description: Sahara IPG clock + - description: Sahara AHB clock + + clock-names: + items: + - const: ipg + - const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx53-sahara + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + else: + properties: + interrupts: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx27-clock.h> + + crypto@10025000 { + compatible = "fsl,imx27-sahara"; + reg = <0x10025000 0x800>; + interrupts = <75>; + clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, + <&clks IMX27_CLK_SAHARA_AHB_GATE>; + clock-names = "ipg", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt deleted file mode 100644 index 7aad448e8a36..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.txt +++ /dev/null @@ -1,21 +0,0 @@ -Freescale Security Controller (SCC) - -Required properties: -- compatible : Should be "fsl,imx25-scc". -- reg : Should contain register location and length. -- interrupts : Should contain interrupt numbers for SCM IRQ and SMN IRQ. -- interrupt-names : Should specify the names "scm" and "smn" for the - SCM IRQ and SMN IRQ. -- clocks: Should contain the clock driving the SCC core. -- clock-names: Should be set to "ipg". - -Example: - - scc: crypto@53fac000 { - compatible = "fsl,imx25-scc"; - reg = <0x53fac000 0x4000>; - clocks = <&clks 111>; - clock-names = "ipg"; - interrupts = <49>, <50>; - interrupt-names = "scm", "smn"; - }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml new file mode 100644 index 000000000000..563a31605d2b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Security Controller (SCC) + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + const: fsl,imx25-scc + + reg: + maxItems: 1 + + interrupts: + items: + - description: SCC SCM interrupt + - description: SCC SMN interrupt + + interrupt-names: + items: + - const: scm + - const: smn + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + crypto@53fac000 { + compatible = "fsl,imx25-scc"; + reg = <0x53fac000 0x4000>; + clocks = <&clks 111>; + clock-names = "ipg"; + interrupts = <49>, <50>; + interrupt-names = "scm", "smn"; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt deleted file mode 100644 index 8f359f473ada..000000000000 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ /dev/null @@ -1,553 +0,0 @@ -===================================================================== -SEC 4 Device Tree Binding -Copyright (C) 2008-2011 Freescale Semiconductor Inc. - - CONTENTS - -Overview - -SEC 4 Node - -Job Ring Node - -Run Time Integrity Check (RTIC) Node - -Run Time Integrity Check (RTIC) Memory Node - -Secure Non-Volatile Storage (SNVS) Node - -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node - -Full Example - -NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator -Accelerator and Assurance Module (CAAM). - -===================================================================== -Overview - -DESCRIPTION - -SEC 4 h/w can process requests from 2 types of sources. -1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). -2. Job Rings (HW interface between cores & SEC 4 registers). - -High Speed Data Path Configuration: - -HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts -such as the P4080. The number of simultaneous dequeues the QI can make is -equal to the number of Descriptor Controller (DECO) engines in a particular -SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus -dequeue from 5 subportals simultaneously. - -Job Ring Data Path Configuration: - -Each JR is located on a separate 4k page, they may (or may not) be made visible -in the memory partition devoted to a particular core. The P4080 has 4 JRs, so -up to 4 JRs can be configured; and all 4 JRs process requests in parallel. - -===================================================================== -SEC 4 Node - -Description - - Node defines the base address of the SEC 4 block. - This block specifies the address range of all global - configuration registers for the SEC 4 block. It - also receives interrupts from the Run Time Integrity Check - (RTIC) function within the SEC 4 block. - -PROPERTIES - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0" - - - fsl,sec-era - Usage: optional - Value type: <u32> - Definition: A standard property. Define the 'ERA' of the SEC - device. - - - #address-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing physical addresses in child nodes. - - - #size-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing the size of physical addresses in - child nodes. - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical - address and length of the SEC4 configuration registers. - registers - - - ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical address - range of the SEC 4.0 register space (-SNVS not included). A - triplet that includes the child address, parent address, & - length. - - - interrupts - Usage: required - Value type: <prop_encoded-array> - Definition: Specifies the interrupts generated by this - device. The value of the interrupts property - consists of one interrupt specifier. The format - of the specifier is defined by the binding document - describing the node's interrupt parent. - - - clocks - Usage: required if SEC 4.0 requires explicit enablement of clocks - Value type: <prop_encoded-array> - Definition: A list of phandle and clock specifier pairs describing - the clocks required for enabling and disabling SEC 4.0. - - - clock-names - Usage: required if SEC 4.0 requires explicit enablement of clocks - Value type: <string> - Definition: A list of clock name strings in the same order as the - clocks property. - - Note: All other standard properties (see the Devicetree Specification) - are allowed but are optional. - - -EXAMPLE - -iMX6QDL/SX requires four clocks - - crypto@300000 { - compatible = "fsl,sec-v4.0"; - fsl,sec-era = <2>; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2>; - clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, - <&clks IMX6QDL_CLK_CAAM_ACLK>, - <&clks IMX6QDL_CLK_CAAM_IPG>, - <&clks IMX6QDL_CLK_EIM_SLOW>; - clock-names = "mem", "aclk", "ipg", "emi_slow"; - }; - - -iMX6UL does only require three clocks - - crypto: crypto@2140000 { - compatible = "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2140000 0x3c000>; - ranges = <0 0x2140000 0x3c000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&clks IMX6UL_CLK_CAAM_MEM>, - <&clks IMX6UL_CLK_CAAM_ACLK>, - <&clks IMX6UL_CLK_CAAM_IPG>; - clock-names = "mem", "aclk", "ipg"; - }; - -===================================================================== -Job Ring (JR) Node - - Child of the crypto node defines data processing interface to SEC 4 - across the peripheral bus for purposes of processing - cryptographic descriptors. The specified address - range can be made visible to one (or more) cores. - The interrupt defined for this node is controlled within - the address range of this node. - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0-job-ring" - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies a two JR parameters: an offset from - the parent physical address and the length the JR registers. - - - fsl,liodn - Usage: optional-but-recommended - Value type: <prop-encoded-array> - Definition: - Specifies the LIODN to be used in conjunction with - the ppid-to-liodn table that specifies the PPID to LIODN mapping. - Needed if the PAMU is used. Value is a 12 bit value - where value is a LIODN ID for this JR. This property is - normally set by boot firmware. - - - interrupts - Usage: required - Value type: <prop_encoded-array> - Definition: Specifies the interrupts generated by this - device. The value of the interrupts property - consists of one interrupt specifier. The format - of the specifier is defined by the binding document - describing the node's interrupt parent. - -EXAMPLE - jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - fsl,liodn = <0x081>; - interrupt-parent = <&mpic>; - interrupts = <88 2>; - }; - - -===================================================================== -Run Time Integrity Check (RTIC) Node - - Child node of the crypto node. Defines a register space that - contains up to 5 sets of addresses and their lengths (sizes) that - will be checked at run time. After an initial hash result is - calculated, these addresses are checked by HW to monitor any - change. If any memory is modified, a Security Violation is - triggered (see SNVS definition). - - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0-rtic". - - - #address-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing physical addresses in child nodes. Must - have a value of 1. - - - #size-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing the size of physical addresses in - child nodes. Must have a value of 1. - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies a two parameters: - an offset from the parent physical address and the length - the SEC4 registers. - - - ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical address - range of the SEC 4 register space (-SNVS not included). A - triplet that includes the child address, parent address, & - length. - -EXAMPLE - rtic@6000 { - compatible = "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - }; - -===================================================================== -Run Time Integrity Check (RTIC) Memory Node - A child node that defines individual RTIC memory regions that are used to - perform run-time integrity check of memory areas that should not modified. - The node defines a register that contains the memory address & - length (combined) and a second register that contains the hash result - in big endian format. - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0-rtic-memory". - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies two parameters: - an offset from the parent physical address and the length: - - 1. The location of the RTIC memory address & length registers. - 2. The location RTIC hash result. - - - fsl,rtic-region - Usage: optional-but-recommended - Value type: <prop-encoded-array> - Definition: - Specifies the HW address (36 bit address) for this region - followed by the length of the HW partition to be checked; - the address is represented as a 64 bit quantity followed - by a 32 bit length. - - - fsl,liodn - Usage: optional-but-recommended - Value type: <prop-encoded-array> - Definition: - Specifies the LIODN to be used in conjunction with - the ppid-to-liodn table that specifies the PPID to LIODN - mapping. Needed if the PAMU is used. Value is a 12 bit value - where value is a LIODN ID for this RTIC memory region. This - property is normally set by boot firmware. - -EXAMPLE - rtic-a@0 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - fsl,liodn = <0x03c>; - fsl,rtic-region = <0x12345678 0x12345678 0x12345678>; - }; - -===================================================================== -Secure Non-Volatile Storage (SNVS) Node - - Node defines address range and the associated - interrupt for the SNVS function. This function - monitors security state information & reports - security violations. This also included rtc, - system power off and ON/OFF key. - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0-mon" and "syscon". - - - reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical - address and length of the SEC4 configuration - registers. - - - #address-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing physical addresses in child nodes. Must - have a value of 1. - - - #size-cells - Usage: required - Value type: <u32> - Definition: A standard property. Defines the number of cells - for representing the size of physical addresses in - child nodes. Must have a value of 1. - - - ranges - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical address - range of the SNVS register space. A triplet that includes - the child address, parent address, & length. - - - interrupts - Usage: optional - Value type: <prop_encoded-array> - Definition: Specifies the interrupts generated by this - device. The value of the interrupts property - consists of one interrupt specifier. The format - of the specifier is defined by the binding document - describing the node's interrupt parent. - -EXAMPLE - sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon", "syscon"; - reg = <0x314000 0x1000>; - ranges = <0 0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2>; - }; - -===================================================================== -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node - - A SNVS child node that defines SNVS LP RTC. - - - compatible - Usage: required - Value type: <string> - Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". - - - interrupts - Usage: required - Value type: <prop_encoded-array> - Definition: Specifies the interrupts generated by this - device. The value of the interrupts property - consists of one interrupt specifier. The format - of the specifier is defined by the binding document - describing the node's interrupt parent. - - - regmap - Usage: required - Value type: <phandle> - Definition: this is phandle to the register map node. - - - offset - Usage: option - value type: <u32> - Definition: LP register offset. default it is 0x34. - - - clocks - Usage: optional, required if SNVS LP RTC requires explicit - enablement of clocks - Value type: <prop_encoded-array> - Definition: a clock specifier describing the clock required for - enabling and disabling SNVS LP RTC. - - - clock-names - Usage: optional, required if SNVS LP RTC requires explicit - enablement of clocks - Value type: <string> - Definition: clock name string should be "snvs-rtc". - -EXAMPLE - sec_mon_rtc_lp@1 { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - interrupts = <93 2>; - regmap = <&snvs>; - offset = <0x34>; - clocks = <&clks IMX7D_SNVS_CLK>; - clock-names = "snvs-rtc"; - }; - -===================================================================== -System ON/OFF key driver - - The snvs-pwrkey is designed to enable POWER key function which controlled - by SNVS ONOFF, the driver can report the status of POWER key and wakeup - system if pressed after system suspend. - - - compatible: - Usage: required - Value type: <string> - Definition: Mush include "fsl,sec-v4.0-pwrkey". - - - interrupts: - Usage: required - Value type: <prop_encoded-array> - Definition: The SNVS ON/OFF interrupt number to the CPU(s). - - - linux,keycode: - Usage: option - Value type: <int> - Definition: Keycode to emit, KEY_POWER by default. - - - wakeup-source: - Usage: option - Value type: <boo> - Definition: Button can wake-up the system. - - - regmap: - Usage: required: - Value type: <phandle> - Definition: this is phandle to the register map node. - -EXAMPLE: - snvs-pwrkey@020cc000 { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = <0 4 0x4> - linux,keycode = <116>; /* KEY_POWER */ - wakeup-source; - }; - -===================================================================== -FULL EXAMPLE - - crypto: crypto@300000 { - compatible = "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x300000 0x10000>; - ranges = <0 0x300000 0x10000>; - interrupt-parent = <&mpic>; - interrupts = <92 2>; - - sec_jr0: jr@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <88 2>; - }; - - sec_jr1: jr@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <89 2>; - }; - - sec_jr2: jr@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <90 2>; - }; - - sec_jr3: jr@4000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x4000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <91 2>; - }; - - rtic@6000 { - compatible = "fsl,sec-v4.0-rtic"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x6000 0x100>; - ranges = <0x0 0x6100 0xe00>; - - rtic_a: rtic-a@0 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x80>; - }; - - rtic_b: rtic-b@20 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x80>; - }; - - rtic_c: rtic-c@40 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x80>; - }; - - rtic_d: rtic-d@60 { - compatible = "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x500 0x80>; - }; - }; - }; - - sec_mon: sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; - reg = <0x314000 0x1000>; - ranges = <0 0x314000 0x1000>; - - sec_mon_rtc_lp@34 { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap = <&sec_mon>; - offset = <0x34>; - interrupts = <93 2>; - clocks = <&clks IMX7D_SNVS_CLK>; - clock-names = "snvs-rtc"; - }; - - snvs-pwrkey@020cc000 { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&sec_mon>; - interrupts = <0 4 0x4>; - linux,keycode = <116>; /* KEY_POWER */ - wakeup-source; - }; - }; - -===================================================================== diff --git a/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml new file mode 100644 index 000000000000..ef07258d16c1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/inside-secure,safexcel.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Inside Secure SafeXcel cryptographic engine + +maintainers: + - Antoine Tenart <atenart@kernel.org> + +properties: + compatible: + oneOf: + - const: inside-secure,safexcel-eip197b + - const: inside-secure,safexcel-eip197d + - const: inside-secure,safexcel-eip97ies + - const: inside-secure,safexcel-eip197 + description: Equivalent of inside-secure,safexcel-eip197b + deprecated: true + - const: inside-secure,safexcel-eip97 + description: Equivalent of inside-secure,safexcel-eip97ies + deprecated: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 6 + + interrupt-names: + items: + - const: ring0 + - const: ring1 + - const: ring2 + - const: ring3 + - const: eip + - const: mem + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + +required: + - reg + - interrupts + - interrupt-names + +allOf: + - if: + properties: + clocks: + minItems: 2 + then: + properties: + clock-names: + minItems: 2 + required: + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ring0", "ring1", "ring2", "ring3", "eip", "mem"; + clocks = <&cpm_syscon0 1 26>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt deleted file mode 100644 index 3bbf144c9988..000000000000 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ /dev/null @@ -1,40 +0,0 @@ -Inside Secure SafeXcel cryptographic engine - -Required properties: -- compatible: Should be "inside-secure,safexcel-eip197b", - "inside-secure,safexcel-eip197d" or - "inside-secure,safexcel-eip97ies". -- reg: Base physical address of the engine and length of memory mapped region. -- interrupts: Interrupt numbers for the rings and engine. -- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". - -Optional properties: -- clocks: Reference to the crypto engine clocks, the second clock is - needed for the Armada 7K/8K SoCs. -- clock-names: mandatory if there is a second clock, in this case the - name must be "core" for the first clock and "reg" for - the second one. - -Backward compatibility: -Two compatibles are kept for backward compatibility, but shouldn't be used for -new submissions: -- "inside-secure,safexcel-eip197" is equivalent to - "inside-secure,safexcel-eip197b". -- "inside-secure,safexcel-eip97" is equivalent to - "inside-secure,safexcel-eip97ies". - -Example: - - crypto: crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", - "eip"; - clocks = <&cpm_syscon0 1 26>; - }; diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml new file mode 100644 index 000000000000..a4006237aa89 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx cryptographic engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE + (Network Processing Engine). Since it is not a device on its own + it is defined as a subnode of the NPE, if crypto support is + available on the platform. + +properties: + compatible: + const: intel,ixp4xx-crypto + + intel,npe-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the NPE this crypto engine + - description: the NPE instance number + description: phandle to the NPE this crypto engine is using, the cell + describing the NPE instance to be used. + + queue-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number + description: phandle to the RX queue on the NPE, the cell describing + the queue instance to be used. + + queue-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the TX READY queue on the NPE + - description: the queue instance number + description: phandle to the TX READY queue on the NPE, the cell describing + the queue instance to be used. + +required: + - compatible + - intel,npe-handle + - queue-rx + - queue-txready + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml new file mode 100644 index 000000000000..fedd8be56ad6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS AES + +maintainers: + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) AES engine provides + hardware-accelerated AES/SM4 encryption/decryption. + +properties: + compatible: + const: intel,keembay-ocs-aes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@30008000 { + compatible = "intel,keembay-ocs-aes"; + reg = <0x30008000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 95>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml new file mode 100644 index 000000000000..2bb95247b64f --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS ECC + +maintainers: + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + - Prabhjot Khurana <prabhjot.khurana@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) Elliptic Curve + Cryptography (ECC) device provides hardware acceleration for elliptic curve + cryptography using the NIST P-256 and NIST P-384 elliptic curves. + +properties: + compatible: + const: intel,keembay-ocs-ecc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@30001000 { + compatible = "intel,keembay-ocs-ecc"; + reg = <0x30001000 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 95>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml new file mode 100644 index 000000000000..46e2853ab8f4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS HCU + +maintainers: + - Declan Murphy <declan.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) Hash Control Unit (HCU) + provides hardware-accelerated hashing and HMAC. + +properties: + compatible: + const: intel,keembay-ocs-hcu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@3000b000 { + compatible = "intel,keembay-ocs-hcu"; + reg = <0x3000b000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 94>; + }; diff --git a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt b/Documentation/devicetree/bindings/crypto/picochip-spacc.txt deleted file mode 100644 index df1151f87745..000000000000 --- a/Documentation/devicetree/bindings/crypto/picochip-spacc.txt +++ /dev/null @@ -1,21 +0,0 @@ -Picochip picoXcell SPAcc (Security Protocol Accelerator) bindings - -Picochip picoXcell devices contain crypto offload engines that may be used for -IPSEC and femtocell layer 2 ciphering. - -Required properties: - - compatible : "picochip,spacc-ipsec" for the IPSEC offload engine - "picochip,spacc-l2" for the femtocell layer 2 ciphering engine. - - reg : Offset and length of the register set for this device - - interrupts : The interrupt line from the SPAcc. - - ref-clock : The input clock that drives the SPAcc. - -Example SPAcc node: - -spacc@10000 { - compatible = "picochip,spacc-ipsec"; - reg = <0x100000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <24>; - ref-clock = <&ipsec_clk>, "ref"; -}; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml new file mode 100644 index 000000000000..09e43157cc71 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + items: + - enum: + - qcom,sa8775p-inline-crypto-engine + - qcom,sm8450-inline-crypto-engine + - qcom,sm8550-inline-crypto-engine + - qcom,sm8650-inline-crypto-engine + - const: qcom,inline-crypto-engine + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + + crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x01d88000 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt deleted file mode 100644 index 7ee0e9eac973..000000000000 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt +++ /dev/null @@ -1,19 +0,0 @@ -Qualcomm MSM pseudo random number generator. - -Required properties: - -- compatible : should be "qcom,prng" for 8916 etc - : should be "qcom,prng-ee" for 8996 and later using EE - (Execution Environment) slice of prng -- reg : specifies base physical address and size of the registers map -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block - -Example: - - rng@f9bff000 { - compatible = "qcom,prng"; - reg = <0xf9bff000 0x200>; - clocks = <&clock GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml new file mode 100644 index 000000000000..89c88004b41b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Pseudo Random Number Generator + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + oneOf: + - enum: + - qcom,prng # 8916 etc. + - qcom,prng-ee # 8996 and later using EE + - items: + - enum: + - qcom,sa8775p-trng + - qcom,sc7280-trng + - qcom,sm8450-trng + - qcom,sm8550-trng + - qcom,sm8650-trng + - const: qcom,trng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + +required: + - compatible + - reg + +allOf: + - if: + not: + properties: + compatible: + contains: + const: qcom,trng + then: + required: + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&clk 125>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt deleted file mode 100644 index fdd53b184ba8..000000000000 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt +++ /dev/null @@ -1,25 +0,0 @@ -Qualcomm crypto engine driver - -Required properties: - -- compatible : should be "qcom,crypto-v5.1" -- reg : specifies base physical address and size of the registers map -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "iface" clocks register interface - "bus" clocks data transfer interface - "core" clocks rest of the crypto block -- dmas : DMA specifiers for tx and rx dma channels. For more see - Documentation/devicetree/bindings/dma/dma.txt -- dma-names : DMA request names should be "rx" and "tx" - -Example: - crypto@fd45a000 { - compatible = "qcom,crypto-v5.1"; - reg = <0xfd45a000 0x6000>; - clocks = <&gcc GCC_CE2_AHB_CLK>, - <&gcc GCC_CE2_AXI_CLK>, - <&gcc GCC_CE2_CLK>; - clock-names = "iface", "bus", "core"; - dmas = <&cryptobam 2>, <&cryptobam 3>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml new file mode 100644 index 000000000000..a48bd381063a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm crypto engine driver + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + This document defines the binding for the QCE crypto + controller found on Qualcomm parts. + +properties: + compatible: + oneOf: + - const: qcom,crypto-v5.1 + deprecated: true + description: Kept only for ABI backward compatibility + + - const: qcom,crypto-v5.4 + deprecated: true + description: Kept only for ABI backward compatibility + + - items: + - enum: + - qcom,ipq4019-qce + - qcom,sm8150-qce + - const: qcom,qce + + - items: + - enum: + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,ipq9574-qce + - qcom,msm8996-qce + - qcom,qcm2290-qce + - qcom,sdm845-qce + - qcom,sm6115-qce + - const: qcom,ipq4019-qce + - const: qcom,qce + + - items: + - enum: + - qcom,sc7280-qce + - qcom,sm8250-qce + - qcom,sm8350-qce + - qcom,sm8450-qce + - qcom,sm8550-qce + - qcom,sm8650-qce + - const: qcom,sm8150-qce + - const: qcom,qce + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + iommus: + minItems: 1 + maxItems: 8 + description: + phandle to apps_smmu node with sid mask. + + interconnects: + maxItems: 1 + description: + Interconnect path between qce crypto and main memory. + + interconnect-names: + const: memory + + dmas: + items: + - description: DMA specifiers for rx dma channel. + - description: DMA specifiers for tx dma channel. + + dma-names: + items: + - const: rx + - const: tx + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,crypto-v5.1 + - qcom,crypto-v5.4 + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,ipq9574-qce + - qcom,msm8996-qce + - qcom,sdm845-qce + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: iface + - const: bus + - const: core + required: + - clocks + - clock-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qce + - qcom,sm6115-qce + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: core + required: + - clocks + - clock-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-qce + then: + properties: + clocks: false + clock-names: false + +required: + - compatible + - reg + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-apq8084.h> + crypto-engine@fd45a000 { + compatible = "qcom,ipq6018-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0xfd45a000 0x6000>; + clocks = <&gcc GCC_CE2_AHB_CLK>, + <&gcc GCC_CE2_AXI_CLK>, + <&gcc GCC_CE2_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x0011>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml new file mode 100644 index 000000000000..f1a9da8bff7a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Electronics Security Accelerator + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3288-crypto + - rockchip,rk3328-crypto + - rockchip,rk3399-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-crypto + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: aclk + - const: hclk + - const: sclk + - const: apb_pclk + resets: + maxItems: 1 + reset-names: + items: + - const: crypto-rst + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-crypto + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: hclk_master + - const: hclk_slave + - const: sclk + resets: + maxItems: 1 + reset-names: + items: + - const: crypto-rst + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-crypto + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: hclk_master + - const: hclk_slave + - const: sclk + resets: + minItems: 3 + reset-names: + items: + - const: master + - const: slave + - const: crypto-rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3288-cru.h> + crypto@ff8a0000 { + compatible = "rockchip,rk3288-crypto"; + reg = <0xff8a0000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; + clock-names = "aclk", "hclk", "sclk", "apb_pclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt deleted file mode 100644 index 5e2ba385b8c9..000000000000 --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt +++ /dev/null @@ -1,28 +0,0 @@ -Rockchip Electronics And Security Accelerator - -Required properties: -- compatible: Should be "rockchip,rk3288-crypto" -- reg: Base physical address of the engine and length of memory mapped - region -- interrupts: Interrupt number -- clocks: Reference to the clocks about crypto -- clock-names: "aclk" used to clock data - "hclk" used to clock data - "sclk" used to clock crypto accelerator - "apb_pclk" used to clock dma -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the name "crypto-rst". - -Examples: - - crypto: cypto-controller@ff8a0000 { - compatible = "rockchip,rk3288-crypto"; - reg = <0xff8a0000 0x4000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, - <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; - clock-names = "aclk", "hclk", "sclk", "apb_pclk"; - resets = <&cru SRST_CRYPTO>; - reset-names = "crypto-rst"; - }; diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml index 04fe5dfa794a..5b31891c97fe 100644 --- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml +++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml @@ -8,7 +8,6 @@ title: Samsung Exynos SoC SlimSSS (Slim Security SubSystem) module maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Kamil Konieczny <k.konieczny@partner.samsung.com> description: |+ The SlimSSS module in Exynos5433 SoC supports the following: @@ -19,13 +18,12 @@ description: |+ properties: compatible: items: - - const: samsung,exynos5433-slim-ss + - const: samsung,exynos5433-slim-sss reg: maxItems: 1 clocks: - minItems: 2 maxItems: 2 clock-names: diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml index cf1c47a81d7f..6d62b0e42fc9 100644 --- a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml +++ b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml @@ -8,7 +8,6 @@ title: Samsung Exynos SoC SSS (Security SubSystem) module maintainers: - Krzysztof Kozlowski <krzk@kernel.org> - - Kamil Konieczny <k.konieczny@partner.samsung.com> description: |+ The SSS module in S5PV210 SoC supports the following: diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml index cee624c14f07..50b2c2e0c3cd 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 CRC bindings +title: STMicroelectronics STM32 CRC maintainers: - - Lionel Debieve <lionel.debieve@st.com> + - Lionel Debieve <lionel.debieve@foss.st.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml index a4574552502a..0ddeb8a9a7a0 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml @@ -4,14 +4,20 @@ $id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 CRYP bindings +title: STMicroelectronics STM32 CRYP + +description: The STM32 CRYP block is built on the CRYP block found in + the STn8820 SoC introduced in 2007, and subsequently used in the U8500 + SoC in 2010. maintainers: - - Lionel Debieve <lionel.debieve@st.com> + - Lionel Debieve <lionel.debieve@foss.st.com> properties: compatible: enum: + - st,stn8820-cryp + - stericsson,ux500-cryp - st,stm32f756-cryp - st,stm32mp1-cryp @@ -27,6 +33,19 @@ properties: resets: maxItems: 1 + dmas: + items: + - description: mem2cryp DMA channel + - description: cryp2mem DMA channel + + dma-names: + items: + - const: mem2cryp + - const: cryp2mem + + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 57ae1c0b6d18..ac480765cde0 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -4,16 +4,23 @@ $id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 HASH bindings +title: STMicroelectronics STM32 HASH + +description: The STM32 HASH block is built on the HASH block found in + the STn8820 SoC introduced in 2007, and subsequently used in the U8500 + SoC in 2010. maintainers: - - Lionel Debieve <lionel.debieve@st.com> + - Lionel Debieve <lionel.debieve@foss.st.com> properties: compatible: enum: + - st,stn8820-hash + - stericsson,ux500-hash - st,stm32f456-hash - st,stm32f756-hash + - st,stm32mp13-hash reg: maxItems: 1 @@ -36,17 +43,31 @@ properties: dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 + + power-domains: + maxItems: 1 required: - compatible - reg - clocks - - interrupts + +allOf: + - if: + properties: + compatible: + items: + const: stericsson,ux500-hash + then: + properties: + interrupts: false + else: + required: + - interrupts additionalProperties: false diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml new file mode 100644 index 000000000000..71a2876bd6e4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Cryptographic Module + +maintainers: + - Jia Jie Ho <jiajie.ho@starfivetech.com> + - William Qiu <william.qiu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-crypto + + reg: + maxItems: 1 + + clocks: + items: + - description: Hardware reference clock + - description: AHB reference clock + + clock-names: + items: + - const: hclk + - const: ahb + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: TX DMA channel + - description: RX DMA channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + crypto: crypto@16000000 { + compatible = "starfive,jh7110-crypto"; + reg = <0x16000000 0x4000>; + clocks = <&clk 15>, <&clk 16>; + clock-names = "hclk", "ahb"; + interrupts = <28>; + resets = <&reset 3>; + dmas = <&dma 1 2>, + <&dma 0 2>; + dma-names = "tx", "rx"; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml new file mode 100644 index 000000000000..ff10a0838ad6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: K3 SoC SA2UL crypto module + +maintainers: + - Tero Kristo <t-kristo@ti.com> + +properties: + compatible: + enum: + - ti,j721e-sa2ul + - ti,am654-sa2ul + - ti,am64-sa2ul + - ti,am62-sa3ul + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: 'RX DMA Channel #1' + - description: 'RX DMA Channel #2' + + dma-names: + items: + - const: tx + - const: rx1 + - const: rx2 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: + description: + Address translation for the possible RNG child node for SA2UL + + clocks: + items: + - description: Clock used by PKA + - description: Main Input Clock + - description: Clock used by rng + + clock-names: + items: + - const: pka_in_clk + - const: x1_clk + - const: x2_clk + +patternProperties: + "^rng@[a-f0-9]+$": + type: object + description: + Child RNG node for SA2UL + +required: + - compatible + - reg + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-sa3ul + then: + properties: + power-domains: false + else: + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + main_crypto: crypto@4e00000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x4e00000 0x1200>; + power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, + <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + }; diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml index 55dd6e3d270d..8aead97a585b 100644 --- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -4,11 +4,11 @@ $id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings +title: Xilinx ZynqMP AES-GCM Hardware Accelerator maintainers: - - Kalyani Akula <kalyani.akula@xilinx.com> - - Michal Simek <michal.simek@xilinx.com> + - Kalyani Akula <kalyani.akula@amd.com> + - Michal Simek <michal.simek@amd.com> description: | The ZynqMP AES-GCM hardened cryptographic accelerator is used to |