diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
25 files changed, 495 insertions, 517 deletions
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt index d1e60d297387..2ef86ae96df8 100644 --- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt @@ -13,6 +13,7 @@ Required Properties: region. - clocks: Reference to the parent clocks ("hosc", "losc") - #clock-cells: should be 1. +- #reset-cells: should be 1. Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. @@ -36,6 +37,7 @@ Example: Clock Management Unit node: reg = <0x0 0xe0160000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; }; Example: UART controller node that consumes clock generated by the clock diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt index 3a880528030e..79511d7bb321 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt @@ -11,6 +11,13 @@ Required Properties: - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "xtal" : the platform xtal + * "mpeg-clk" : the main clock controller mother clock (aka clk81) + * "ext-32k-0" : external 32kHz reference #0 if any (optional) + * "ext-32k-1" : external 32kHz reference #1 if any (optional - gx only) + * "ext-32k-2" : external 32kHz reference #2 if any (optional - gx only) - #clock-cells: should be 1. @@ -40,8 +47,9 @@ ao_sysctrl: sys-ctrl@0 { compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; }; -}; Example: UART controller node that consumes the clock and reset generated by the clock controller: diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index e950599566a9..a6871953bf04 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,9 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. +- clocks : list of clock phandle, one for each entry clock-names. +- clock-names : should contain the following: + * "xtal": the platform xtal - #clock-cells: should be 1. @@ -31,6 +34,8 @@ sysctrl: system-controller@0 { clkc: clock-controller { #clock-cells = <1>; compatible = "amlogic,gxbb-clkc"; + clocks = <&xtal>; + clock-names = "xtal"; }; }; diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index b455c5aa9139..4d94091c1d2d 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -9,15 +9,13 @@ Required Properties: - "amlogic,meson8-clkc" for Meson8 (S802) SoCs - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs -- reg: it must be composed by two tuples: - 0) physical base address of the xtal register and length of memory - mapped region. - 1) physical base address of the clock controller and length of memory - mapped region. - - #clock-cells: should be 1. - #reset-cells: should be 1. +Parent node should have the following properties : +- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" +- reg: base address and size of the HHI system control register space. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be @@ -30,9 +28,8 @@ device tree sources). Example: Clock controller node: - clkc: clock-controller@c1104000 { + clkc: clock-controller { compatible = "amlogic,meson8b-clkc"; - reg = <0xc1108000 0x4>, <0xc1104000 0x460>; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 8f8f95056f3d..e9f70fcdfe80 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -4,6 +4,8 @@ This binding uses the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt +Slow Clock controller: + Required properties: - compatible : shall be one of the following: "atmel,at91sam9x5-sckc" or @@ -16,84 +18,6 @@ Required properties: "atmel,at91sam9x5-clk-slow-rc-osc": at91 internal slow RC oscillator - - "atmel,<chip>-pmc": - at91 PMC (Power Management Controller) - All at91 specific clocks (clocks defined below) must be child - node of the PMC node. - <chip> can be: at91rm9200, at91sam9260, at91sam9261, - at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5, - sama5d2, sama5d3 or sama5d4. - - "atmel,at91sam9x5-clk-slow" (under sckc node) - or - "atmel,at91sam9260-clk-slow" (under pmc node): - at91 slow clk - - "atmel,at91rm9200-clk-main-osc" - "atmel,at91sam9x5-clk-main-rc-osc" - at91 main clk sources - - "atmel,at91sam9x5-clk-main" - "atmel,at91rm9200-clk-main": - at91 main clock - - "atmel,at91rm9200-clk-master" or - "atmel,at91sam9x5-clk-master": - at91 master clock - - "atmel,at91sam9x5-clk-peripheral" or - "atmel,at91rm9200-clk-peripheral": - at91 peripheral clocks - - "atmel,at91rm9200-clk-pll" or - "atmel,at91sam9g45-clk-pll" or - "atmel,at91sam9g20-clk-pllb" or - "atmel,sama5d3-clk-pll": - at91 pll clocks - - "atmel,at91sam9x5-clk-plldiv": - at91 plla divisor - - "atmel,at91rm9200-clk-programmable" or - "atmel,at91sam9g45-clk-programmable" or - "atmel,at91sam9x5-clk-programmable": - at91 programmable clocks - - "atmel,at91sam9x5-clk-smd": - at91 SMD (Soft Modem) clock - - "atmel,at91rm9200-clk-system": - at91 system clocks - - "atmel,at91rm9200-clk-usb" or - "atmel,at91sam9x5-clk-usb" or - "atmel,at91sam9n12-clk-usb": - at91 usb clock - - "atmel,at91sam9x5-clk-utmi": - at91 utmi clock - - "atmel,sama5d4-clk-h32mx": - at91 h32mx clock - - "atmel,sama5d2-clk-generated": - at91 generated clock - - "atmel,sama5d2-clk-audio-pll-frac": - at91 audio fractional pll - - "atmel,sama5d2-clk-audio-pll-pad": - at91 audio pll CLK_AUDIO output pin - - "atmel,sama5d2-clk-audio-pll-pmc" - at91 audio pll output on AUDIOPLLCLK that feeds the PMC - and can be used by peripheral clock or generic clock - - "atmel,sama5d2-clk-i2s-mux" (under pmc node): - at91 I2S clock source selection - -Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id). - #address-cells : shall be 1 (reg is used to encode clk id). @@ -109,428 +33,30 @@ For example: /* put at91 slow clocks here */ }; +Power Management Controller (PMC): -Required properties for internal slow RC oscillator: -- #clock-cells : from common clock binding; shall be set to 0. -- clock-frequency : define the internal RC oscillator frequency. - -Optional properties: -- clock-accuracy : define the internal RC oscillator accuracy. - -For example: - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - -Required properties for slow oscillator: -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall encode the main osc source clk sources (see atmel datasheet). +Required properties: +- compatible : shall be "atmel,<chip>-pmc", "syscon": + <chip> can be: at91rm9200, at91sam9260, at91sam9261, + at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, + at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, + sama5d2, sama5d3 or sama5d4. +- #clock-cells : from common clock binding; shall be set to 2. The first entry + is the type of the clock (core, system, peripheral or generated) and the + second entry its index as provided by the datasheet +- clocks : Must contain an entry for each entry in clock-names. +- clock-names: Must include the following entries: "slow_clk", "main_xtal" Optional properties: - atmel,osc-bypass : boolean property. Set this when a clock signal is directly provided on XIN. For example: - slow_osc: slow_osc { - compatible = "atmel,at91rm9200-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - }; - -Required properties for slow clock: -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall encode the slow clk sources (see atmel datasheet). - -For example: - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; - -Required properties for PMC node: -- reg : defines the IO memory reserved for the PMC. -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). -- interrupts : shall be set to PMC interrupt line. -- interrupt-controller : tell that the PMC is an interrupt controller. -- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, - and reflect the bit position in the PMC_ER/DR/SR registers. - You can use the dt macros defined in dt-bindings/clock/at91.h. - 0 (AT91_PMC_MOSCS) -> main oscillator ready - 1 (AT91_PMC_LOCKA) -> PLL A ready - 2 (AT91_PMC_LOCKB) -> PLL B ready - 3 (AT91_PMC_MCKRDY) -> master clock ready - 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready - 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready - 16 (AT91_PMC_MOSCSELS) -> main oscillator selected - 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized - 18 (AT91_PMC_CFDEV) -> clock failure detected - -For example: - pmc: pmc@fffffc00 { - compatible = "atmel,sama5d3-pmc"; - interrupts = <1 4 7>; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #address-cells = <1>; - - /* put at91 clocks here */ - }; - -Required properties for main clock internal RC oscillator: -- interrupts : shall be set to "<0>". -- clock-frequency : define the internal RC oscillator frequency. - -Optional properties: -- clock-accuracy : define the internal RC oscillator accuracy. - -For example: - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - interrupt-parent = <&pmc>; - interrupts = <0>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - -Required properties for main clock oscillator: -- interrupts : shall be set to "<0>". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall encode the main osc source clk sources (see atmel datasheet). - -Optional properties: -- atmel,osc-bypass : boolean property. Specified if a clock signal is provided - on XIN. - - clock signal is directly provided on XIN pin. - -For example: - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - interrupt-parent = <&pmc>; - interrupts = <0>; - #clock-cells = <0>; - clocks = <&main_xtal>; - }; - -Required properties for main clock: -- interrupts : shall be set to "<0>". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall encode the main clk sources (see atmel datasheet). - -For example: - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - interrupt-parent = <&pmc>; - interrupts = <0>; - #clock-cells = <0>; - clocks = <&main_rc_osc &main_osc>; - }; - -Required properties for master clock: -- interrupts : shall be set to "<3>". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the master clock sources (see atmel datasheet) phandles. - e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>". -- atmel,clk-output-range : minimum and maximum clock frequency (two u32 - fields). - e.g. output = <0 133000000>; <=> 0 to 133MHz. -- atmel,clk-divisors : master clock divisors table (four u32 fields). - 0 <=> reserved value. - e.g. divisors = <1 2 4 6>; -- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the - PRES field as CLOCK_DIV3 (e.g sam9x5). - -For example: - mck: mck { - compatible = "atmel,at91rm9200-clk-master"; - interrupt-parent = <&pmc>; - interrupts = <3>; - #clock-cells = <0>; - atmel,clk-output-range = <0 133000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - -Required properties for peripheral clocks: -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). -- clocks : shall be the master clock phandle. - e.g. clocks = <&mck>; -- name: device tree node describing a specific peripheral clock. - * #clock-cells : from common clock binding; shall be set to 0. - * reg: peripheral id. See Atmel's datasheets to get a full - list of peripheral ids. - * atmel,clk-output-range : minimum and maximum clock frequency - (two u32 fields). Only valid on at91sam9x5-clk-peripheral - compatible IPs. - -For example: - periph: periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #size-cells = <0>; - #address-cells = <1>; - clocks = <&mck>; - - ssc0_clk { - #clock-cells = <0>; - reg = <2>; - atmel,clk-output-range = <0 133000000>; - }; - - usart0_clk { - #clock-cells = <0>; - reg = <3>; - atmel,clk-output-range = <0 66000000>; - }; - }; - - -Required properties for pll clocks: -- interrupts : shall be set to "<1>". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the main clock phandle. -- reg : pll id. - 0 -> PLL A - 1 -> PLL B -- atmel,clk-input-range : minimum and maximum source clock frequency (two u32 - fields). - e.g. input = <1 32000000>; <=> 1 to 32MHz. -- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output - range description. Sould be set to 2, 3 - or 4. - * 1st and 2nd cells represent the frequency range (min-max). - * 3rd cell is optional and represents the OUT field value for the given - range. - * 4th cell is optional and represents the ICPLL field (PLLICPR - register) -- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter - depending on #atmel,pll-output-range-cells - property value. - -For example: - plla: pllack { - compatible = "atmel,at91sam9g45-clk-pll"; - interrupt-parent = <&pmc>; - interrupts = <1>; - #clock-cells = <0>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <74500000 800000000 0 0 - 69500000 750000000 1 0 - 64500000 700000000 2 0 - 59500000 650000000 3 0 - 54500000 600000000 0 1 - 49500000 550000000 1 1 - 44500000 500000000 2 1 - 40000000 450000000 3 1>; - }; - -Required properties for plldiv clocks (plldiv = pll / 2): -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the plla clock phandle. - -The pll divisor is equal to 2 and cannot be changed. - -For example: - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - -Required properties for programmable clocks: -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). -- clocks : shall be the programmable clock source phandles. - e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; -- name: device tree node describing a specific prog clock. - * #clock-cells : from common clock binding; shall be set to 0. - * reg : programmable clock id (register offset from PCKx - register). - * interrupts : shall be set to "<(8 + id)>". - -For example: - prog: progck { - compatible = "atmel,at91sam9g45-clk-programmable"; - #size-cells = <0>; - #address-cells = <1>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <8>; - }; - - prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <9>; - }; - }; - - -Required properties for smd clock: -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the smd clock source phandles. - e.g. clocks = <&plladiv>, <&utmi>; - -For example: - smd: smdck { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - -Required properties for system clocks: -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). -- name: device tree node describing a specific system clock. - * #clock-cells : from common clock binding; shall be set to 0. - * reg: system clock id (bit position in SCER/SCDR/SCSR registers). - See Atmel's datasheet to get a full list of system clock ids. - -For example: - system: systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - }; - - -Required properties for usb clock: -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the smd clock source phandles. - e.g. clocks = <&pllb>; -- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"): - usb clock divisor table. - e.g. divisors = <1 2 4 0>; - -For example: - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - clocks = <&pllb>; - atmel,clk-divisors = <1 2 4 0>; - }; - - -Required properties for utmi clock: -- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>". -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the main clock source phandle. - -For example: - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <0>; - clocks = <&main>; - }; - -Required properties for 32 bits bus Matrix clock (h32mx clock): -- #clock-cells : from common clock binding; shall be set to 0. -- clocks : shall be the master clock source phandle. - -For example: - h32ck: h32mxck { - #clock-cells = <0>; - compatible = "atmel,sama5d4-clk-h32mx"; - clocks = <&mck>; - }; - -Required properties for generated clocks: -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). -- clocks : shall be the generated clock source phandles. - e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; -- name: device tree node describing a specific generated clock. - * #clock-cells : from common clock binding; shall be set to 0. - * reg: peripheral id. See Atmel's datasheets to get a full - list of peripheral ids. - * atmel,clk-output-range : minimum and maximum clock frequency - (two u32 fields). - -For example: - gck { - compatible = "atmel,sama5d2-clk-generated"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; - - tcb0_gclk: tcb0_gclk { - #clock-cells = <0>; - reg = <35>; - atmel,clk-output-range = <0 83000000>; - }; - - pwm_gclk: pwm_gclk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - }; - -Required properties for I2S mux clocks: -- #size-cells : shall be 0 (reg is used to encode I2S bus id). -- #address-cells : shall be 1 (reg is used to encode I2S bus id). -- name: device tree node describing a specific mux clock. - * #clock-cells : from common clock binding; shall be set to 0. - * clocks : shall be the mux clock parent phandles; shall be 2 phandles: - peripheral and generated clock; the first phandle shall belong to the - peripheral clock and the second one shall belong to the generated - clock; "clock-indices" property can be user to specify - the correct order. - * reg: I2S bus id of the corresponding mux clock. - e.g. reg = <0>; for i2s0, reg = <1>; for i2s1 - -For example: - i2s_clkmux { - compatible = "atmel,sama5d2-clk-i2s-mux"; - #address-cells = <1>; - #size-cells = <0>; - - i2s0muxck: i2s0_muxclk { - clocks = <&i2s0_clk>, <&i2s0_gclk>; - #clock-cells = <0>; - reg = <0>; - }; - - i2s1muxck: i2s1_muxclk { - clocks = <&i2s1_clk>, <&i2s1_gclk>; - #clock-cells = <0>; - reg = <1>; - }; + pmc: pmc@f0018000 { + compatible = "atmel,sama5d4-pmc", "syscon"; + reg = <0xf0018000 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 2ec489eebe72..b646bbcf7f92 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -168,3 +168,19 @@ a shared clock is forbidden. Configuration of common clocks, which affect multiple consumer devices can be similarly specified in the clock provider node. + +==Protected clocks== + +Some platforms or firmwares may not fully expose all the clocks to the OS, such +as in situations where those clks are used by drivers running in ARM secure +execution levels. Such a configuration can be specified in device tree with the +protected-clocks property in the form of a clock specifier list. This property should +only be specified in the node that is providing the clocks being protected: + + clock-controller@a000f000 { + compatible = "vendor,clk95; + reg = <0xa000f000 0x1000> + #clocks-cells = <1>; + ... + protected-clocks = <UART3_CLK>, <SPI5_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/hi3670-clock.txt b/Documentation/devicetree/bindings/clock/hi3670-clock.txt new file mode 100644 index 000000000000..66f3697eca78 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3670-clock.txt @@ -0,0 +1,43 @@ +* Hisilicon Hi3670 Clock Controller + +The Hi3670 clock controller generates and supplies clock to various +controllers within the Hi3670 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3670-crgctrl" + - "hisilicon,hi3670-pctrl" + - "hisilicon,hi3670-pmuctrl" + - "hisilicon,hi3670-sctrl" + - "hisilicon,hi3670-iomcu" + - "hisilicon,hi3670-media1-crg" + - "hisilicon,hi3670-media2-crg" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3670-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>, + <&crg_ctrl HI3670_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index a45ca67a9d5f..13d36d4c6991 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -6,6 +6,17 @@ Required properties: - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> +Optional properties: +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal + on power off. + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. +- clocks: list of clock specifiers, must contain an entry for each entry + in clock-names +- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2" + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h for the full list of i.MX6 Quad and DualLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt new file mode 100644 index 000000000000..a4f8cd478f92 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7ulp-clock.txt @@ -0,0 +1,104 @@ +* Clock bindings for Freescale i.MX7ULP + +i.MX7ULP Clock functions are under joint control of the System +Clock Generation (SCG) modules, Peripheral Clock Control (PCC) +modules, and Core Mode Controller (CMC)1 blocks + +The clocking scheme provides clear separation between M4 domain +and A7 domain. Except for a few clock sources shared between two +domains, such as the System Oscillator clock, the Slow IRC (SIRC), +and and the Fast IRC clock (FIRCLK), clock sources and clock +management are separated and contained within each domain. + +M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. +A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. + +Note: this binding doc is only for A7 clock domain. + +System Clock Generation (SCG) modules: +--------------------------------------------------------------------- +The System Clock Generation (SCG) is responsible for clock generation +and distribution across this device. Functions performed by the SCG +include: clock reference selection, generation of clock used to derive +processor, system, peripheral bus and external memory interface clocks, +source selection for peripheral clocks and control of power saving +clock gating mode. + +Required properties: + +- compatible: Should be "fsl,imx7ulp-scg1". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "rosc", "sosc", "sirc", "firc", "upll", "mpll". + +Peripheral Clock Control (PCC) modules: +--------------------------------------------------------------------- +The Peripheral Clock Control (PCC) is responsible for clock selection, +optional division and clock gating mode for peripherals in their +respected power domain + +Required properties: +- compatible: Should be one of: + "fsl,imx7ulp-pcc2", + "fsl,imx7ulp-pcc3". +- reg : Should contain registers location and length. +- #clock-cells: Should be <1>. +- clocks: Should contain the fixed input clocks. +- clock-names: Should contain the following clock names: + "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", + "apll_pfd1", "apll_pfd0", "upll", "sosc_bus_clk", + "mpll", "firc_bus_clk", "rosc", "spll_bus_clk"; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See include/dt-bindings/clock/imx7ulp-clock.h +for the full list of i.MX7ULP clock IDs of each module. + +Examples: + +#include <dt-bindings/clock/imx7ulp-clock.h> + +scg1: scg1@403e0000 { + compatible = "fsl,imx7ulp-scg1; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; +}; + +pcc2: pcc2@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; +}; + +usdhc1: usdhc@40380000 { + compatible = "fsl,imx7ulp-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + bus-width = <4>; +}; diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt new file mode 100644 index 000000000000..52de8263e012 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt @@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "fsl,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs. diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt new file mode 100644 index 000000000000..965cfa42e025 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt @@ -0,0 +1,51 @@ +* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings + +The Low-Power Clock Gate (LPCG) modules contain a local programming +model to control the clock gates for the peripherals. An LPCG module +is used to locally gate the clocks for the associated peripheral. + +Note: +This level of clock gating is provided after the clocks are generated +by the SCU resources and clock controls. Thus even if the clock is +enabled by these control bits, it might still not be running based +on the base resource. + +Required properties: +- compatible: Should be one of: + "fsl,imx8qxp-lpcg-adma", + "fsl,imx8qxp-lpcg-conn", + "fsl,imx8qxp-lpcg-dc", + "fsl,imx8qxp-lpcg-dsp", + "fsl,imx8qxp-lpcg-gpu", + "fsl,imx8qxp-lpcg-hsio", + "fsl,imx8qxp-lpcg-img", + "fsl,imx8qxp-lpcg-lsio", + "fsl,imx8qxp-lpcg-vpu" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +See the full list of clock IDs from: +include/dt-bindings/clock/imx8qxp-clock.h + +Examples: + +#include <dt-bindings/clock/imx8qxp-clock.h> + +conn_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; +}; + +usdhc1: mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; +}; diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt index f8d4134ae409..ba5a442026b7 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt @@ -6,8 +6,11 @@ to provide many different clock signals derived from only 2 external source clocks. Required properties: -- compatible : Should be "ingenic,<soctype>-cgu". - For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu". +- compatible : Should be one of: + * ingenic,jz4740-cgu + * ingenic,jz4725b-cgu + * ingenic,jz4770-cgu + * ingenic,jz4780-cgu - reg : The address & length of the CGU registers. - clocks : List of phandle & clock specifiers for clocks external to the CGU. Two such external clocks should be specified - first the external crystal diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt index af376a01f2b7..23b52dc02266 100644 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt @@ -18,4 +18,4 @@ Required Properties: Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. -All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>. +All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt new file mode 100644 index 000000000000..c5eb6694fda9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,camcc.txt @@ -0,0 +1,18 @@ +Qualcomm Camera Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible : shall contain "qcom,sdm845-camcc". +- reg : shall contain base register location and length. +- #clock-cells : from common clock binding, shall contain 1. +- #reset-cells : from common reset binding, shall contain 1. +- #power-domain-cells : from generic power domain binding, shall contain 1. + +Example: + camcc: clock-controller@ad00000 { + compatible = "qcom,sdm845-camcc"; + reg = <0xad00000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 664ea1fd6c76..8661c3cd3ccf 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -19,6 +19,9 @@ Required properties : "qcom,gcc-msm8996" "qcom,gcc-msm8998" "qcom,gcc-mdm9615" + "qcom,gcc-qcs404" + "qcom,gcc-sdm630" + "qcom,gcc-sdm660" "qcom,gcc-sdm845" - reg : shall contain base register location and length @@ -32,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be part of the GCC/clock-controller node. For more details on the TSENS properties please refer Documentation/devicetree/bindings/thermal/qcom-tsens.txt +- protected-clocks : Protected clock specifier list as per common clock + binding. Example: clock-controller@900000 { @@ -52,3 +57,17 @@ Example of GCC with TSENS properties: #reset-cells = <1>; #thermal-sensor-cells = <1>; }; + +Example of GCC with protected-clocks properties: + clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt new file mode 100644 index 000000000000..4e5215ef1acd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt @@ -0,0 +1,22 @@ +Qualcomm Graphics Clock & Reset Controller Binding +-------------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-gpucc" +- reg : shall contain base register location and length +- #clock-cells : from common clock binding, shall contain 1 +- #reset-cells : from common reset binding, shall contain 1 +- #power-domain-cells : from generic power domain binding, shall contain 1 +- clocks : shall contain the XO clock +- clock-names : shall be "xo" + +Example: + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0x5090000 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt new file mode 100644 index 000000000000..ec02a024424c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt @@ -0,0 +1,60 @@ +High-Frequency PLL (HFPLL) + +PROPERTIES + +- compatible: + Usage: required + Value type: <string>: + shall contain only one of the following. The generic + compatible "qcom,hfpll" should be also included. + + "qcom,hfpll-ipq8064", "qcom,hfpll" + "qcom,hfpll-apq8064", "qcom,hfpll" + "qcom,hfpll-msm8974", "qcom,hfpll" + "qcom,hfpll-msm8960", "qcom,hfpll" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address and size of HPLL registers. An optional second + element specifies the address and size of the alias + register region. + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the xo clock. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "xo". + +- clock-output-names: + Usage: required + Value type: <string> + Definition: Name of the PLL. Typically hfpllX where X is a CPU number + starting at 0. Otherwise hfpll_Y where Y is more specific + such as "l2". + +Example: + +1) An HFPLL for the L2 cache. + + clock-controller@f9016000 { + compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; + reg = <0xf9016000 0x30>; + clocks = <&xo_board>; + clock-names = "xo"; + clock-output-names = "hfpll_l2"; + }; + +2) An HFPLL for CPU0. This HFPLL has the alias register region. + + clock-controller@f908a000 { + compatible = "qcom,hfpll-ipq8064", "qcom,hfpll"; + reg = <0xf908a000 0x30>, <0xf900a000 0x30>; + clocks = <&xo_board>; + clock-names = "xo"; + clock-output-names = "hfpll0"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt new file mode 100644 index 000000000000..030ba60dab08 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt @@ -0,0 +1,34 @@ +Krait Clock Controller + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,krait-cc-v1" + "qcom,krait-cc-v2" + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the clock parents of hfpll, secondary muxes. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb". + +Example: + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>; + clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt new file mode 100644 index 000000000000..b9e9787045b9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt @@ -0,0 +1,26 @@ +Qualcomm LPASS Clock Controller Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain "qcom,sdm845-lpasscc" +- #clock-cells : from common clock binding, shall contain 1. +- reg : shall contain base register address and size, + in the order + Index-0 maps to LPASS_CC register region + Index-1 maps to LPASS_QDSP6SS register region + +Optional properties : +- reg-names : register names of LPASS domain + "cc", "qdsp6ss". + +Example: + +The below node has to be defined in the cases where the LPASS peripheral loader +would bring the subsystem out of reset. + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0x17014000 0x1f004>, <0x17300000 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 4491d1c104aa..87b4949e9bc8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.txt b/Documentation/devicetree/bindings/clock/qcom,videocc.txt index e7c035afa778..8a8622c65c5a 100644 --- a/Documentation/devicetree/bindings/clock/qcom,videocc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.txt @@ -6,8 +6,6 @@ Required properties : - reg : shall contain base register location and length - #clock-cells : from common clock binding, shall contain 1. - #power-domain-cells : from generic power domain binding, shall contain 1. - -Optional properties : - #reset-cells : from common reset binding, shall contain 1. Example: @@ -16,4 +14,5 @@ Example: reg = <0xab00000 0x10000>; #clock-cells = <1>; #power-domain-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 97f46adac85f..c655f28d5918 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -28,6 +28,12 @@ Required properties: * "fsl,p4080-clockgen" * "fsl,p5020-clockgen" * "fsl,p5040-clockgen" + * "fsl,t1023-clockgen" + * "fsl,t1024-clockgen" + * "fsl,t1040-clockgen" + * "fsl,t1042-clockgen" + * "fsl,t2080-clockgen" + * "fsl,t2081-clockgen" * "fsl,t4240-clockgen" * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index db542abadb75..916a601b76a7 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -13,9 +13,13 @@ They provide the following functionalities: Required Properties: - compatible: Must be one of: + - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2) - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) + - "renesas,r8a7744-cpg-mssr" for the r8a7744 SoC (RZ/G1N) - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C) + - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M) + - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E) - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) @@ -35,12 +39,13 @@ Required Properties: - clocks: References to external parent clocks, one entry for each entry in clock-names - clock-names: List of external parent clock names. Valid names are: - - "extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7792, - r8a7793, r8a7794, r8a7795, r8a7796, r8a77965, r8a77970, - r8a77980, r8a77990, r8a77995) - - "extalr" (r8a7795, r8a7796, r8a77965, r8a77970, r8a77980) - - "usb_extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7793, - r8a7794) + - "extal" (r7s9210, r8a7743, r8a7744, r8a7745, r8a77470, r8a774a1, + r8a774c0, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, + r8a7795, r8a7796, r8a77965, r8a77970, r8a77980, r8a77990, + r8a77995) + - "extalr" (r8a774a1, r8a7795, r8a7796, r8a77965, r8a77970, r8a77980) + - "usb_extal" (r8a7743, r8a7744, r8a7745, r8a77470, r8a7790, r8a7791, + r8a7793, r8a7794) - #clock-cells: Must be 2 - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt index e94582e8b8a9..41a52c2acffd 100644 --- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -1,5 +1,5 @@ -Allwinner Display Engine 2.0 Clock Control Binding --------------------------------------------------- +Allwinner Display Engine 2.0/3.0 Clock Control Binding +------------------------------------------------------ Required properties : - compatible: must contain one of the following compatibles: @@ -8,6 +8,7 @@ Required properties : - "allwinner,sun8i-v3s-de2-clk" - "allwinner,sun50i-a64-de2-clk" - "allwinner,sun50i-h5-de2-clk" + - "allwinner,sun50i-h6-de3-clk" - reg: Must contain the registers base address and length - clocks: phandle to the clocks feeding the display engine subsystem. diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 47d2e902ced4..e3bd88ae456b 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -22,6 +22,7 @@ Required properties : - "allwinner,sun50i-h5-ccu" - "allwinner,sun50i-h6-ccu" - "allwinner,sun50i-h6-r-ccu" + - "allwinner,suniv-f1c100s-ccu" - "nextthing,gr8-ccu" - reg: Must contain the registers base address and length |