diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
85 files changed, 2623 insertions, 1602 deletions
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt index f404a4f9b165..d00debe2e86f 100644 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ b/Documentation/devicetree/bindings/arm/al,alpine.txt @@ -14,75 +14,3 @@ compatible: must contain "al,alpine" ... } - -* CPU node: - -The Alpine platform includes cortex-a15 cores. -enable-method: must be "al,alpine-smp" to allow smp [1] - -Example: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "al,alpine-smp"; - - cpu@0 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <1>; - }; - - cpu@2 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <2>; - }; - - cpu@3 { - compatible = "arm,cortex-a15"; - device_type = "cpu"; - reg = <3>; - }; -}; - - -* Alpine CPU resume registers - -The CPU resume register are used to define required resume address after -reset. - -Properties: -- compatible : Should contain "al,alpine-cpu-resume". -- reg : Offset and length of the register set for the device - -Example: - -cpu_resume { - compatible = "al,alpine-cpu-resume"; - reg = <0xfbff5ed0 0x30>; -}; - -* Alpine System-Fabric Service Registers - -The System-Fabric Service Registers allow various operation on CPU and -system fabric, like powering CPUs off. - -Properties: -- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". -- reg : Offset and length of the register set for the device - -Example: - -nb_service { - compatible = "al,alpine-sysfabric-service", "syscon"; - reg = <0xfb070000 0x10000>; -}; - -[1] arm/cpu-enable-method/al,alpine-smp diff --git a/Documentation/devicetree/bindings/arm/altera.txt b/Documentation/devicetree/bindings/arm/altera.txt deleted file mode 100644 index 558735aacca8..000000000000 --- a/Documentation/devicetree/bindings/arm/altera.txt +++ /dev/null @@ -1,14 +0,0 @@ -Altera's SoCFPGA platform device tree bindings ---------------------------------------------- - -Boards with Cyclone 5 SoC: -Required root node properties: -compatible = "altr,socfpga-cyclone5", "altr,socfpga"; - -Boards with Arria 5 SoC: -Required root node properties: -compatible = "altr,socfpga-arria5", "altr,socfpga"; - -Boards with Arria 10 SoC: -Required root node properties: -compatible = "altr,socfpga-arria10", "altr,socfpga"; diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml new file mode 100644 index 000000000000..49e0362ddc11 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera's SoCFPGA platform device tree bindings + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + items: + - enum: + - altr,socfpga-cyclone5 + - altr,socfpga-arria5 + - altr,socfpga-arria10 + - const: altr,socfpga +... diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt deleted file mode 100644 index 2c28f1d12f45..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt +++ /dev/null @@ -1,11 +0,0 @@ -Altera SOCFPGA Clock Manager - -Required properties: -- compatible : "altr,clk-mgr" -- reg : Should contain base address and length for Clock Manager - -Example: - clkmgr@ffd04000 { - compatible = "altr,clk-mgr"; - reg = <0xffd04000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml new file mode 100644 index 000000000000..e4131fa42b26 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/altera/socfpga-clk-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera SOCFPGA Clock Manager + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +description: test + +properties: + compatible: + items: + - const: altr,clk-mgr + reg: + maxItems: 1 + +required: + - compatible + +examples: + - | + clkmgr@ffd04000 { + compatible = "altr,clk-mgr"; + reg = <0xffd04000 0x1000>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt index 7b9a861e9306..5ab59da052df 100644 --- a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt +++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt @@ -17,4 +17,11 @@ Required sub-node properties: - compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared memory on Amlogic GXBB SoC. +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +SCPI provides an API to access the various sensors on the SoC. + +Required properties: +- compatible : should be "amlogic,meson-gxbb-scpi-sensors". + [0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index b5c2b5c35766..8dbc259081e4 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -57,12 +57,17 @@ Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: Required root node property: compatible: "amlogic,a113d", "amlogic,meson-axg"; +Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,g12a"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) - "minix,neo-x8" (Meson8) + - "endless,ec100" (Meson8b) - "hardkernel,odroid-c1" (Meson8b) - "tronfy,mxq" (Meson8b) @@ -86,8 +91,10 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "phicomm,n1" (Meson gxl s905d) - "amlogic,p241" (Meson gxl s805x) + - "libretech,aml-s805x-ac" (Meson gxl s805x) - "amlogic,p281" (Meson gxl s905w) - "oranth,tx3-mini" (Meson gxl s905w) @@ -101,6 +108,8 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) + - "amlogic,u200" (Meson g12a s905d2) + Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 31220b54d85d..4bf1b4da7659 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -70,173 +70,3 @@ compatible: must be one of: - "atmel,samv71q19" - "atmel,samv71q20" - "atmel,samv71q21" - -Chipid required properties: -- compatible: Should be "atmel,sama5d2-chipid" -- reg : Should contain registers location and length - -PIT Timer required properties: -- compatible: Should be "atmel,at91sam9260-pit" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt for the PIT which is the IRQ line - shared across all System Controller members. - -System Timer (ST) required properties: -- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt for the ST which is the IRQ line - shared across all System Controller members. -- clocks: phandle to input clock. -Its subnodes can be: -- watchdog: compatible should be "atmel,at91rm9200-wdt" - -RSTC Reset Controller required properties: -- compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -Example: - - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; - clocks = <&clk32k>; - }; - -RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" - "atmel,at91sam9260-sdramc", - "atmel,at91sam9g45-ddramc", - "atmel,sama5d3-ddramc", -- reg: Should contain registers location and length - -Examples: - - ramc0: ramc@ffffe800 { - compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe800 0x200>; - }; - -SHDWC Shutdown Controller - -required properties: -- compatible: Should be "atmel,<chip>-shdwc". - <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". -- reg: Should contain registers location and length -- clocks: phandle to input clock. - -optional properties: -- atmel,wakeup-mode: String, operation mode of the wakeup mode. - Supported values are: "none", "high", "low", "any". -- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). - -optional at91sam9260 properties: -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9rl properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. - -optional at91sam9x5 properties: -- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. - -Example: - - shdwc@fffffd10 { - compatible = "atmel,at91sam9260-shdwc"; - reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; - }; - -SHDWC SAMA5D2-Compatible Shutdown Controller - -1) shdwc node - -required properties: -- compatible: should be "atmel,sama5d2-shdwc". -- reg: should contain registers location and length -- clocks: phandle to input clock. -- #address-cells: should be one. The cell is the wake-up input index. -- #size-cells: should be zero. - -optional properties: - -- debounce-delay-us: minimum wake-up inputs debouncer period in - microseconds. It's usually a board-related property. -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. - -The node contains child nodes for each wake-up input that the platform uses. - -2) input nodes - -Wake-up input nodes are usually described in the "board" part of the Device -Tree. Note also that input 0 is linked to the wake-up pin and is frequently -used. - -Required properties: -- reg: should contain the wake-up input index [0 - 15]. - -Optional properties: -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described - by the child, forces the wake-up of the core power supply on a high level. - The default is to be active low. - -Example: - -On the SoC side: - shdwc@f8048010 { - compatible = "atmel,sama5d2-shdwc"; - reg = <0xf8048010 0x10>; - clocks = <&clk32k>; - #address-cells = <1>; - #size-cells = <0>; - atmel,wakeup-rtc-timer; - }; - -On the board side: - shdwc@f8048010 { - debounce-delay-us = <976>; - - input@0 { - reg = <0>; - }; - - input@1 { - reg = <1>; - atmel,wakeup-active-high; - }; - }; - -Special Function Registers (SFR) - -Special Function Registers (SFR) manage specific aspects of the integrated -memory, bridge implementations, processor and other functionality not controlled -elsewhere. - -required properties: -- compatible: Should be "atmel,<chip>-sfr", "syscon" or - "atmel,<chip>-sfrbu", "syscon" - <chip> can be "sama5d3", "sama5d4" or "sama5d2". -- reg: Should contain registers location and length - - sfr@f0038000 { - compatible = "atmel,sama5d3-sfr", "syscon"; - reg = <0xf0038000 0x60>; - }; - -Security Module (SECUMOD) - -The Security Module macrocell provides all necessary secure functions to avoid -voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled - -required properties: -- compatible: Should be "atmel,<chip>-secumod", "syscon". - <chip> can be "sama5d2". -- reg: Should contain registers location and length - - secumod@fc040000 { - compatible = "atmel,sama5d2-secumod", "syscon"; - reg = <0xfc040000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt new file mode 100644 index 000000000000..14f319f694b7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -0,0 +1,181 @@ +Atmel system registers + +Chipid required properties: +- compatible: Should be "atmel,sama5d2-chipid" +- reg : Should contain registers location and length + +PIT Timer required properties: +- compatible: Should be "atmel,at91sam9260-pit" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the PIT which is the IRQ line + shared across all System Controller members. + +System Timer (ST) required properties: +- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the ST which is the IRQ line + shared across all System Controller members. +- clocks: phandle to input clock. +Its subnodes can be: +- watchdog: compatible should be "atmel,at91rm9200-wdt" + +RSTC Reset Controller required properties: +- compatible: Should be "atmel,<chip>-rstc". + <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" +- reg: Should contain registers location and length +- clocks: phandle to input clock. + +Example: + + rstc@fffffd00 { + compatible = "atmel,at91sam9260-rstc"; + reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; + }; + +RAMC SDRAM/DDR Controller required properties: +- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" + "atmel,at91sam9260-sdramc", + "atmel,at91sam9g45-ddramc", + "atmel,sama5d3-ddramc", +- reg: Should contain registers location and length + +Examples: + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + +SHDWC Shutdown Controller + +required properties: +- compatible: Should be "atmel,<chip>-shdwc". + <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". +- reg: Should contain registers location and length +- clocks: phandle to input clock. + +optional properties: +- atmel,wakeup-mode: String, operation mode of the wakeup mode. + Supported values are: "none", "high", "low", "any". +- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf). + +optional at91sam9260 properties: +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9rl properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. + +optional at91sam9x5 properties: +- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up. + +Example: + + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; + }; + +SHDWC SAMA5D2-Compatible Shutdown Controller + +1) shdwc node + +required properties: +- compatible: should be "atmel,sama5d2-shdwc". +- reg: should contain registers location and length +- clocks: phandle to input clock. +- #address-cells: should be one. The cell is the wake-up input index. +- #size-cells: should be zero. + +optional properties: + +- debounce-delay-us: minimum wake-up inputs debouncer period in + microseconds. It's usually a board-related property. +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. + +The node contains child nodes for each wake-up input that the platform uses. + +2) input nodes + +Wake-up input nodes are usually described in the "board" part of the Device +Tree. Note also that input 0 is linked to the wake-up pin and is frequently +used. + +Required properties: +- reg: should contain the wake-up input index [0 - 15]. + +Optional properties: +- atmel,wakeup-active-high: boolean, the corresponding wake-up input described + by the child, forces the wake-up of the core power supply on a high level. + The default is to be active low. + +Example: + +On the SoC side: + shdwc@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + }; + +On the board side: + shdwc@f8048010 { + debounce-delay-us = <976>; + + input@0 { + reg = <0>; + }; + + input@1 { + reg = <1>; + atmel,wakeup-active-high; + }; + }; + +Special Function Registers (SFR) + +Special Function Registers (SFR) manage specific aspects of the integrated +memory, bridge implementations, processor and other functionality not controlled +elsewhere. + +required properties: +- compatible: Should be "atmel,<chip>-sfr", "syscon" or + "atmel,<chip>-sfrbu", "syscon" + <chip> can be "sama5d3", "sama5d4" or "sama5d2". +- reg: Should contain registers location and length + + sfr@f0038000 { + compatible = "atmel,sama5d3-sfr", "syscon"; + reg = <0xf0038000 0x60>; + }; + +Security Module (SECUMOD) + +The Security Module macrocell provides all necessary secure functions to avoid +voltage, temperature, frequency and mechanical attacks on the chip. It also +embeds secure memories that can be scrambled. + +The Security Module also offers the PIOBU pins which can be used as GPIO pins. +Note that they maintain their voltage during Backup/Self-refresh. + +required properties: +- compatible: Should be "atmel,<chip>-secumod", "syscon". + <chip> can be "sama5d2". +- reg: Should contain registers location and length +- gpio-controller: Marks the port as GPIO controller. +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. + + + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index 1e3e29a545e2..0dcc3ea5adff 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -42,6 +42,14 @@ Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +Raspberry Pi Compute Module 3 +Required root node properties: +compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + +Raspberry Pi Compute Module 3 Lite +Required root node properties: +compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837"; + Raspberry Pi Zero Required root node properties: compatible = "raspberrypi,model-zero", "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt deleted file mode 100644 index 25fcf96795ca..000000000000 --- a/Documentation/devicetree/bindings/arm/calxeda.txt +++ /dev/null @@ -1,15 +0,0 @@ -Calxeda Platforms Device Tree Bindings ------------------------------------------------ - -Boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC shall have the -following properties. - -Required root node properties: - - compatible = "calxeda,highbank"; - - -Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following -properties. - -Required root node properties: - - compatible = "calxeda,ecx-2000"; diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml new file mode 100644 index 000000000000..aa5571d23c39 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/calxeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Platforms Device Tree Bindings + +maintainers: + - Rob Herring <robh@kernel.org> +description: |+ + Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC + or Cortex-A15 based ECX-2000 SOCs + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - calxeda,highbank + - calxeda,ecx-2000 diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 5d1ad09bafb4..f8aff65ab921 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -54,9 +54,7 @@ its hardware characteristcs. clocks the core of that coresight component. The latter clock is optional. - * port or ports: The representation of the component's port - layout using the generic DT graph presentation found in - "bindings/graph.txt". + * port or ports: see "Graph bindings for Coresight" below. * Additional required properties for System Trace Macrocells (STM): * reg: along with the physical base address and length of the register @@ -73,7 +71,7 @@ its hardware characteristcs. AMBA markee): - "arm,coresight-replicator" - * port or ports: same as above. + * port or ports: see "Graph bindings for Coresight" below. * Optional properties for ETM/PTMs: @@ -96,6 +94,20 @@ its hardware characteristcs. * interrupts : Exactly one SPI may be listed for reporting the address error +Graph bindings for Coresight +------------------------------- + +Coresight components are interconnected to create a data path for the flow of +trace data generated from the "sources" to their collection points "sink". +Each coresight component must describe the "input" and "output" connections. +The connections must be described via generic DT graph bindings as described +by the "bindings/graph.txt", where each "port" along with an "endpoint" +component represents a hardware port and the connection. + + * All output ports must be listed inside a child node named "out-ports" + * All input ports must be listed inside a child node named "in-ports". + * Port address must match the hardware port number. + Example: 1. Sinks @@ -105,10 +117,11 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etb_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + etb_in_port: endpoint@0 { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -119,10 +132,11 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + tpiu_in_port: endpoint@0 { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -133,22 +147,16 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* input port */ - port@0 { - reg = <0>; + in-ports { + port { etr_in_port: endpoint { - slave-mode; remote-endpoint = <&replicator2_out_port0>; }; }; + }; - /* CATU link represented by output port */ - port@1 { - reg = <1>; + out-ports { + port { etr_out_port: endpoint { remote-endpoint = <&catu_in_port>; }; @@ -163,7 +171,7 @@ Example: */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -181,12 +189,11 @@ Example: remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port0>; }; }; @@ -199,40 +206,36 @@ Example: clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port0: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; @@ -248,9 +251,11 @@ Example: cpu = <&cpu0>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -262,9 +267,11 @@ Example: cpu = <&cpu1>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -278,9 +285,11 @@ Example: clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; - port { - stm_out_port: endpoint { - remote-endpoint = <&main_funnel_in_port2>; + out-ports { + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; }; }; }; @@ -295,10 +304,11 @@ Example: clock-names = "apb_pclk"; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - port { - catu_in_port: endpoint { - slave-mode; - remote-endpoint = <&etr_out_port>; + in-ports { + port { + catu_in_port: endpoint { + remote-endpoint = <&etr_out_port>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt index 9b5685a1d15d..96fa46cb133c 100644 --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt @@ -59,9 +59,11 @@ mhz values (normalized w.r.t. the highest value found while parsing the DT). =========================================== Example 1 (ARM 64-bit, 6-cpu system, two clusters): -capacities-dmips-mhz are scaled w.r.t. 1024 (cpu@0 and cpu@1) -supposing cluster0@max-freq=1100 and custer1@max-freq=850, -final capacities are 1024 for cluster0 and 446 for cluster1 +The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024) +are 1024 and 578 for cluster0 and cluster1. Further normalization +is done by the operating system based on cluster0@max-freq=1100 and +custer1@max-freq=850, final capacities are 1024 for cluster0 and +446 for cluster1 (576*850/1100). cpus { #address-cells = <2>; @@ -233,4 +235,4 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp index c2e0cc5e4cfd..35e5afb6d9ad 100644 --- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp @@ -14,7 +14,28 @@ Related properties: (none) Note: This enable method requires valid nodes compatible with -"al,alpine-cpu-resume" and "al,alpine-nb-service"[1]. +"al,alpine-cpu-resume" and "al,alpine-nb-service". + + +* Alpine CPU resume registers + +The CPU resume register are used to define required resume address after +reset. + +Properties: +- compatible : Should contain "al,alpine-cpu-resume". +- reg : Offset and length of the register set for the device + + +* Alpine System-Fabric Service Registers + +The System-Fabric Service Registers allow various operation on CPU and +system fabric, like powering CPUs off. + +Properties: +- compatible : Should contain "al,alpine-sysfabric-service" and "syscon". +- reg : Offset and length of the register set for the device + Example: @@ -48,5 +69,12 @@ cpus { }; }; --- -[1] arm/al,alpine.txt +cpu_resume { + compatible = "al,alpine-cpu-resume"; + reg = <0xfbff5ed0 0x30>; +}; + +nb_service { + compatible = "al,alpine-sysfabric-service", "syscon"; + reg = <0xfb070000 0x10000>; +}; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt deleted file mode 100644 index 96dfccc0faa8..000000000000 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ /dev/null @@ -1,490 +0,0 @@ -================= -ARM CPUs bindings -================= - -The device tree allows to describe the layout of CPUs in a system through -the "cpus" node, which in turn contains a number of subnodes (ie "cpu") -defining properties for every cpu. - -Bindings for CPU nodes follow the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -with updates for 32-bit and 64-bit ARM systems provided in this document. - -================================ -Convention used in this document -================================ - -This document follows the conventions described in the Devicetree -Specification, with the addition: - -- square brackets define bitfields, eg reg[7:0] value of the bitfield in - the reg property contained in bits 7 down to 0 - -===================================== -cpus and cpu node bindings definition -===================================== - -The ARM architecture, in accordance with the Devicetree Specification, -requires the cpus and cpu nodes to be present and contain the properties -described below. - -- cpus node - - Description: Container of cpu nodes - - The node name must be "cpus". - - A cpus node must define the following properties: - - - #address-cells - Usage: required - Value type: <u32> - - Definition depends on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - # On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - # On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - #size-cells - Usage: required - Value type: <u32> - Definition: must be set to 0 - -- cpu node - - Description: Describes a CPU in an ARM based system - - PROPERTIES - - - device_type - Usage: required - Value type: <string> - Definition: must be "cpu" - - reg - Usage and definition depend on ARM architecture version and - configuration: - - # On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - # On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - # On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - # On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. - - * If cpus node's #address-cells property is set to 2 - - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. - - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. - - * If cpus node's #address-cells property is set to 1 - - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. - - All other bits in the reg cells must be set to 0. - - - compatible: - Usage: required - Value type: <string> - Definition: should be one of: - "arm,arm710t" - "arm,arm720t" - "arm,arm740t" - "arm,arm7ej-s" - "arm,arm7tdmi" - "arm,arm7tdmi-s" - "arm,arm9es" - "arm,arm9ej-s" - "arm,arm920t" - "arm,arm922t" - "arm,arm925" - "arm,arm926e-s" - "arm,arm926ej-s" - "arm,arm940t" - "arm,arm946e-s" - "arm,arm966e-s" - "arm,arm968e-s" - "arm,arm9tdmi" - "arm,arm1020e" - "arm,arm1020t" - "arm,arm1022e" - "arm,arm1026ej-s" - "arm,arm1136j-s" - "arm,arm1136jf-s" - "arm,arm1156t2-s" - "arm,arm1156t2f-s" - "arm,arm1176jzf" - "arm,arm1176jz-s" - "arm,arm1176jzf-s" - "arm,arm11mpcore" - "arm,cortex-a5" - "arm,cortex-a7" - "arm,cortex-a8" - "arm,cortex-a9" - "arm,cortex-a12" - "arm,cortex-a15" - "arm,cortex-a17" - "arm,cortex-a53" - "arm,cortex-a57" - "arm,cortex-a72" - "arm,cortex-a73" - "arm,cortex-m0" - "arm,cortex-m0+" - "arm,cortex-m1" - "arm,cortex-m3" - "arm,cortex-m4" - "arm,cortex-r4" - "arm,cortex-r5" - "arm,cortex-r7" - "brcm,brahma-b15" - "brcm,brahma-b53" - "brcm,vulcan" - "cavium,thunder" - "cavium,thunder2" - "faraday,fa526" - "intel,sa110" - "intel,sa1100" - "marvell,feroceon" - "marvell,mohawk" - "marvell,pj4a" - "marvell,pj4b" - "marvell,sheeva-v5" - "nvidia,tegra132-denver" - "nvidia,tegra186-denver" - "nvidia,tegra194-carmel" - "qcom,krait" - "qcom,kryo" - "qcom,kryo385" - "qcom,scorpion" - - enable-method - Value type: <stringlist> - Usage and definition depend on ARM architecture version. - # On ARM v8 64-bit this property is required and must - be one of: - "psci" - "spin-table" - # On ARM 32-bit systems this property is optional and - can be one of: - "actions,s500-smp" - "allwinner,sun6i-a31" - "allwinner,sun8i-a23" - "allwinner,sun9i-a80-smp" - "amlogic,meson8-smp" - "amlogic,meson8b-smp" - "arm,realview-smp" - "brcm,bcm11351-cpu-method" - "brcm,bcm23550" - "brcm,bcm2836-smp" - "brcm,bcm-nsp-smp" - "brcm,brahma-b15" - "marvell,armada-375-smp" - "marvell,armada-380-smp" - "marvell,armada-390-smp" - "marvell,armada-xp-smp" - "marvell,98dx3236-smp" - "mediatek,mt6589-smp" - "mediatek,mt81xx-tz-smp" - "qcom,gcc-msm8660" - "qcom,kpss-acc-v1" - "qcom,kpss-acc-v2" - "renesas,apmu" - "renesas,r9a06g032-smp" - "rockchip,rk3036-smp" - "rockchip,rk3066-smp" - "ste,dbx500-smp" - - - cpu-release-addr - Usage: required for systems that have an "enable-method" - property value of "spin-table". - Value type: <prop-encoded-array> - Definition: - # On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - - qcom,saw - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the SAW[1] node associated with this CPU. - - - qcom,acc - Usage: required for systems that have an "enable-method" - property value of "qcom,kpss-acc-v1" or - "qcom,kpss-acc-v2" - Value type: <phandle> - Definition: Specifies the ACC[2] node associated with this CPU. - - - cpu-idle-states - Usage: Optional - Value type: <prop-encoded-array> - Definition: - # List of phandles to idle state nodes supported - by this cpu [3]. - - - capacity-dmips-mhz - Usage: Optional - Value type: <u32> - Definition: - # u32 value representing CPU capacity [4] in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - - rockchip,pmu - Usage: optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - Value type: <phandle> - Definition: Specifies the syscon node controlling the cpu core - power domains. - - - dynamic-power-coefficient - Usage: optional - Value type: <prop-encoded-array> - Definition: A u32 value that represents the running time dynamic - power coefficient in units of mW/MHz/uV^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in uV, frequency is in MHz. - -Example 1 (dual-cluster big.LITTLE system 32-bit): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0x1>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - }; - }; - -Example 2 (Cortex-A8 uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - }; - }; - -Example 3 (ARM 926EJ-S uniprocessor 32-bit system): - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - reg = <0x0>; - }; - }; - -Example 4 (ARM Cortex-A57 64-bit system): - -cpus { - #size-cells = <0>; - #address-cells = <2>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@10101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100000101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010000 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010001 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; - - cpu@100010101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1 0x10101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x20000000>; - }; -}; - --- -[1] arm/msm/qcom,saw2.txt -[2] arm/msm/qcom,kpss-acc.txt -[3] ARM Linux kernel documentation - idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[4] ARM Linux kernel documentation - cpu capacity bindings - Documentation/devicetree/bindings/arm/cpu-capacity.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml new file mode 100644 index 000000000000..298c17b327c6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -0,0 +1,507 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM CPUs bindings + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + The device tree allows to describe the layout of CPUs in a system through + the "cpus" node, which in turn contains a number of subnodes (ie "cpu") + defining properties for every cpu. + + Bindings for CPU nodes follow the Devicetree Specification, available from: + + https://www.devicetree.org/specifications/ + + with updates for 32-bit and 64-bit ARM systems provided in this document. + + ================================ + Convention used in this document + ================================ + + This document follows the conventions described in the Devicetree + Specification, with the addition: + + - square brackets define bitfields, eg reg[7:0] value of the bitfield in + the reg property contained in bits 7 down to 0 + + ===================================== + cpus and cpu node bindings definition + ===================================== + + The ARM architecture, in accordance with the Devicetree Specification, + requires the cpus and cpu nodes to be present and contain the properties + described below. + +properties: + $nodename: + const: cpus + description: Container of cpu nodes + + '#address-cells': + enum: [1, 2] + description: | + Definition depends on ARM architecture version and configuration: + + On uniprocessor ARM architectures previous to v7 + value must be 1, to enable a simple enumeration + scheme for processors that do not have a HW CPU + identification register. + On 32-bit ARM 11 MPcore, ARM v7 or later systems + value must be 1, that corresponds to CPUID/MPIDR + registers sizes. + On ARM v8 64-bit systems value should be set to 2, + that corresponds to the MPIDR_EL1 register size. + If MPIDR_EL1[63:32] value is equal to 0 on all CPUs + in the system, #address-cells can be set to 1, since + MPIDR_EL1[63:32] bits are not used for CPUs + identification. + + '#size-cells': + const: 0 + +patternProperties: + '^cpu@[0-9a-f]+$': + properties: + device_type: + const: cpu + + reg: + maxItems: 1 + description: | + Usage and definition depend on ARM architecture version and + configuration: + + On uniprocessor ARM architectures previous to v7 + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + items: + - enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,saw2.txt + + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. + + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" + + * arm/msm/qcom,kpss-acc.txt + + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. + + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. + + required: + - device_type + - reg + - compatible + + dependencies: + cpu-release-addr: [enable-method] + rockchip,pmu: [enable-method] + +required: + - '#address-cells' + - '#size-cells' + +examples: + - | + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + }; + + - | + // Example 2 (Cortex-A8 uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + }; + }; + + - | + // Example 3 (ARM 926EJ-S uniprocessor 32-bit system): + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm926ej-s"; + reg = <0x0>; + }; + }; + + - | + // Example 4 (ARM Cortex-A57 64-bit system): + cpus { + #size-cells = <0>; + #address-cells = <2>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100000101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010000 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010001 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + + cpu@100010101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x20000000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt deleted file mode 100644 index 715622c36260..000000000000 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ /dev/null @@ -1,25 +0,0 @@ -Texas Instruments DaVinci Platforms Device Tree Bindings --------------------------------------------------------- - -DA850/OMAP-L138/AM18x Evaluation Module (EVM) board -Required root node properties: - - compatible = "ti,da850-evm", "ti,da850"; - -DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board -Required root node properties: - - compatible = "ti,da850-lcdk", "ti,da850"; - -EnBW AM1808 based CMC board -Required root node properties: - - compatible = "enbw,cmc", "ti,da850; - -LEGO MINDSTORMS EV3 (AM1808 based) -Required root node properties: - - compatible = "lego,ev3", "ti,da850"; - -Generic DaVinci Boards ----------------------- - -DA850/OMAP-L138/AM18x generic board -Required root node properties: - - compatible = "ti,da850"; diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt new file mode 100644 index 000000000000..83329aefc483 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/emtrion.txt @@ -0,0 +1,12 @@ +Emtrion Devicetree Bindings +=========================== + +emCON Series: +------------- + +Required root node properties + - compatible: + - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base + - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM + - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt new file mode 100644 index 000000000000..75195bee116f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt @@ -0,0 +1,23 @@ +Freescale i.MX7ULP Power Management Components +---------------------------------------------- + +The Multi-System Mode Controller (MSMC) is responsible for sequencing +the MCU into and out of all stop and run power modes. Specifically, it +monitors events to trigger transitions between power modes while +controlling the power, clocks, and memories of the MCU to achieve the +power consumption and functionality of that mode. + +The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or +Standby modes for either Cortex family. Run, Wait, and Stop are the +common terms used for the primary operating modes of Kinetis +microcontrollers. + +Required properties: +- compatible: Should be "fsl,imx7ulp-smc1". +- reg: Specifies base physical address and size of the register sets. + +Example: +smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt new file mode 100644 index 000000000000..b5cb374dc47d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt @@ -0,0 +1,19 @@ +Freescale DCFG + +DCFG is the device configuration unit, that provides general purpose +configuration and status for the device. Such as setting the secondary +core start address and release the secondary core from holdoff and startup. + +Required properties: + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-dcfg", + The following <chip>s are known to be supported: + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. + + - reg : should contain base address and length of DCFG memory-mapped registers + +Example: + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt new file mode 100644 index 000000000000..0ab67b0b216d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt @@ -0,0 +1,19 @@ +Freescale SCFG + +SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + +Required properties: + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-scfg", + The following <chip>s are known to be supported: + ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. + + - reg: should contain base address and length of SCFG memory-mapped registers + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt new file mode 100644 index 000000000000..27784b6edfed --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -0,0 +1,175 @@ +NXP i.MX System Controller Firmware (SCFW) +-------------------------------------------------------------------- + +The System Controller Firmware (SCFW) is a low-level system function +which runs on a dedicated Cortex-M core to provide power, clock, and +resource management. It exists on some i.MX8 processors. e.g. i.MX8QM +(QM, QP), and i.MX8QX (QXP, DX). + +The AP communicates with the SC using a multi-ported MU module found +in the LSIO subsystem. The current definition of this MU module provides +5 remote AP connections to the SC to support up to 5 execution environments +(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces +with the LSIO DSC IP bus. The SC firmware will communicate with this MU +using the MSI bus. + +System Controller Device Node: +============================================================ + +The scu node with the following properties shall be under the /firmware/ node. + +Required properties: +------------------- +- compatible: should be "fsl,imx-scu". +- mbox-names: should include "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3". +- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels + for rx. All 8 MU channels must be in the same MU instance. + Cross instances are not allowed. The MU instance can only + be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need + to make sure use the one which is not conflict with other + execution environments. e.g. ATF. + Note: + Channel 0 must be "tx0" or "rx0". + Channel 1 must be "tx1" or "rx1". + Channel 2 must be "tx2" or "rx2". + Channel 3 must be "tx3" or "rx3". + e.g. + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + See Documentation/devicetree/bindings/mailbox/fsl,mu.txt + for detailed mailbox binding. + +i.MX SCU Client Device Node: +============================================================ + +Client nodes are maintained as children of the relevant IMX-SCU device node. + +Power domain bindings based on SCU Message Protocol +------------------------------------------------------------ + +This binding for the SCU power domain providers uses the generic power +domain binding[2]. + +Required properties: +- compatible: Should be "fsl,imx8qxp-scu-pd". +- #power-domain-cells: Must be 1. Contains the Resource ID used by + SCU commands. + See detailed Resource ID list from: + include/dt-bindings/firmware/imx/rsrc.h + +Clock bindings based on SCU Message Protocol +------------------------------------------------------------ + +This binding uses the common clock binding[1]. + +Required properties: +- compatible: Should be "fsl,imx8qxp-clock". +- #clock-cells: Should be 1. Contains the Clock ID value. +- clocks: List of clock specifiers, must contain an entry for + each required entry in clock-names +- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. + +See the full list of clock IDs from: +include/dt-bindings/clock/imx8qxp-clock.h + +Pinctrl bindings based on SCU Message Protocol +------------------------------------------------------------ + +This binding uses the i.MX common pinctrl binding[3]. + +Required properties: +- compatible: Should be one of: + "fsl,imx8qm-iomuxc", + "fsl,imx8qxp-iomuxc". + +Required properties for Pinctrl sub nodes: +- fsl,pins: Each entry consists of 3 integers which represents + the mux and config setting for one pin. The first 2 + integers <pin_id mux_mode> are specified using a + PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/pads-imx8qm.h>, + <dt-bindings/pinctrl/pads-imx8qxp.h>. + The last integer CONFIG is the pad setting value like + pull-up on this pin. + + Please refer to i.MX8QXP Reference Manual for detailed + CONFIG settings. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/power/power_domain.txt +[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt + +RTC bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be "fsl,imx8qxp-sc-rtc"; + +Example (imx8qxp): +------------- +lsio_mu1: mailbox@5d1c0000 { + ... + #mbox-cells = <2>; +}; + +firmware { + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + + clk: clk { + compatible = "fsl,imx8qxp-clk"; + #clock-cells = <1>; + }; + + iomuxc { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + ... + }; + + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; + }; + + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + }; +}; + +serial@5a060000 { + ... + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + clocks = <&clk IMX8QXP_UART0_CLK>, + <&clk IMX8QXP_UART0_IPG_CLK>; + clock-names = "per", "ipg"; + power-domains = <&pd IMX_SC_R_UART_0>; +}; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 8a1baa2b9723..7fbc42484001 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -57,6 +57,54 @@ i.MX6SLL EVK board Required root node properties: - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; +i.MX6 Quad Plus SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; + +i.MX6 Quad Plus SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; + +i.MX6 DualLite SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; + +i.MX6 DualLite/Solo SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; + +i.MX6 SoloLite EVK Board +Required root node properties: + - compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + +i.MX6 UltraLite 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; + +i.MX6 UltraLiteLite 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; + +i.MX6 ULZ 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; + +i.MX6 SoloX SDB Board +Required root node properties: + - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + +i.MX6 SoloX Sabre Auto Board +Required root node properties: + - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; + +i.MX7 SabreSD Board +Required root node properties: + - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + +i.MX7ULP Evaluation Kit +Required root node properties: + - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; + Generic i.MX boards ------------------- @@ -79,6 +127,10 @@ i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; +i.MX7ULP generic board +Required root node properties: + - compatible = "fsl,imx7ulp"; + Freescale Vybrid Platform Device Tree Bindings ---------------------------------------------- @@ -101,45 +153,6 @@ Freescale LS1021A Platform Device Tree Bindings Required root node compatible properties: - compatible = "fsl,ls1021a"; -Freescale SoC-specific Device Tree Bindings -------------------------------------------- - -Freescale SCFG - SCFG is the supplemental configuration unit, that provides SoC specific -configuration and status registers for the chip. Such as getting PEX port -status. - Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-scfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg: should contain base address and length of SCFG memory-mapped registers - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg"; - reg = <0x0 0x1570000 0x0 0x10000>; - }; - -Freescale DCFG - DCFG is the device configuration unit, that provides general purpose -configuration and status for the device. Such as setting the secondary -core start address and release the secondary core from holdoff and startup. - Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-dcfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg : should contain base address and length of DCFG memory-mapped registers - -Example: - dcfg: dcfg@1ee0000 { - compatible = "fsl,ls1021a-dcfg"; - reg = <0x0 0x1ee0000 0x0 0x10000>; - }; - Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 199cd36fe1ba..a97f643e7d1c 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -8,6 +8,14 @@ HiKey960 Board Required root node properties: - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; +Hi3670 SoC +Required root node properties: + - compatible = "hisilicon,hi3670"; + +HiKey970 Board +Required root node properties: + - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; + Hi3798cv200 SoC Required root node properties: - compatible = "hisilicon,hi3798cv200"; diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 2c73847499ab..45730ba60af5 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -142,7 +142,7 @@ characterised by the following graph: The graph is split in two parts delimited by time 1ms on the X-axis. The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope -and denotes the energy costs incurred whilst entering and leaving the idle +and denotes the energy costs incurred while entering and leaving the idle state. The graph curve in the area delimited by X-axis values = {x | x > 1ms } has shallower slope and essentially represents the energy consumption of the idle @@ -684,7 +684,7 @@ cpus { =========================================== [1] ARM Linux Kernel documentation - CPUs bindings - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings Documentation/devicetree/bindings/arm/psci.txt diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt index 31f5f9a104cc..b56a02c10ae6 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt @@ -45,11 +45,15 @@ Optional Properties: debug_messages - Map the Debug message region - reg: register space corresponding to the debug_messages - ti,system-reboot-controller: If system reboot can be triggered by SoC reboot +- ti,host-id: Integer value corresponding to the host ID assigned by Firmware + for identification of host processing entities such as virtual + machines Example (K2G): ------------- pmmc: pmmc { compatible = "ti,k2g-sci"; + ti,host-id = <2>; mbox-names = "rx", "tx"; mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>, <&msgmgr &msgmgr_proxy_pmmc_tx>; diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt index 3fd21bb7cb37..7b8b8eb0191f 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -114,12 +114,17 @@ Documentation/devicetree/bindings/thermal/thermal.txt The thermal IP can probe the temperature all around the processor. It may feature several channels, each of them wired to one sensor. +It is possible to setup an overheat interrupt by giving at least one +critical point to any subnode of the thermal-zone node. + Required properties: - compatible: must be one of: * marvell,armada-ap806-thermal - reg: register range associated with the thermal functions. Optional properties: +- interrupts: overheat interrupt handle. Should point to line 18 of the + SEI irqchip. See interrupt-controller/interrupts.txt - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer to this IP and represents the channel ID. There is one sensor per channel. O refers to the thermal IP internal channel, while positive @@ -133,6 +138,8 @@ ap_syscon1: system-controller@6f8000 { ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; #thermal-sensor-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index 81ce742d2760..4db4119a6d19 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -199,6 +199,9 @@ Thermal: The thermal IP can probe the temperature all around the processor. It may feature several channels, each of them wired to one sensor. +It is possible to setup an overheat interrupt by giving at least one +critical point to any subnode of the thermal-zone node. + For common binding part and usage, refer to Documentation/devicetree/bindings/thermal/thermal.txt @@ -208,6 +211,11 @@ Required properties: - reg: register range associated with the thermal functions. Optional properties: +- interrupts-extended: overheat interrupt handle. Should point to + a line of the ICU-SEI irqchip (116 is what is usually used by the + firmware). The ICU-SEI will redirect towards interrupt line #37 of the + AP SEI which is shared across all CPs. + See interrupt-controller/interrupts.txt - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer to this IP and represents the channel ID. There is one sensor per channel. O refers to the thermal IP internal channel. @@ -220,6 +228,7 @@ CP110_LABEL(syscon1): system-controller@6f8000 { CP110_LABEL(thermal): thermal-sensor@70 { compatible = "marvell,armada-cp110-thermal"; reg = <0x70 0x10>; + interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index b404d592ce58..de4075413d91 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -10,6 +10,8 @@ Required Properties: - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" + - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" + - "mediatek,mt7629-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index 34a69ba67f13..d1606b2c3e63 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-audsys", "syscon" - "mediatek,mt7622-audsys", "syscon" + - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4010e37c53a0..149567a38215 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" - "mediatek,mt2712-bdpsys", "syscon" + - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 8f5335b480ac..6b7e8067e7aa 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -8,6 +8,8 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" + - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7629-ethsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index f5629d64cef2..323905af82c3 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" - "mediatek,mt7622-hifsys", "syscon" + - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 868bd51a98be..3f99672163e3 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" + - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 566f153f9f83..417bd83d1378 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -11,6 +11,8 @@ Required Properties: - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" + - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt7629-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 4eb8bbe15c01..15d977afad31 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" + - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt index 7fe5dc6097a6..d179a61536f4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-pciesys", "syscon" + - "mediatek,mt7629-pciesys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index fb58ca8c2770..4c7e478117a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -10,6 +10,8 @@ Required Properties: - "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt2712-pericfg", "syscon" - "mediatek,mt7622-pericfg", "syscon" + - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt7629-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt index d113b8e741f3..30cb645c0e54 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-sgmiisys", "syscon" + - "mediatek,mt7629-sgmiisys", "syscon" - #clock-cells: Must be 1 The SGMIISYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt index b8184da2508c..7cb02c930613 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-ssusbsys", "syscon" + - "mediatek,mt7629-ssusbsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index 24014a7e2332..d160c2b4b6fe 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -10,6 +10,8 @@ Required Properties: - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" + - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" + - "mediatek,mt7629-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index ea40d05089f8..3212afc753c8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" + - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt index 117d741a2e4f..951687528efb 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt @@ -11,4 +11,4 @@ Required root node properties: MMP2 Brownstone Board Required root node properties: - - compatible = "mrvl,mmp2-brownstone"; + - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt index 1333db9acfee..7f696362a4a1 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt @@ -21,10 +21,29 @@ PROPERTIES the register region. An optional second element specifies the base address and size of the alias register region. +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the pll parents. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "pll8_vote", "pxo". + +- clock-output-names: + Usage: optional + Value type: <string> + Definition: Name of the output clock. Typically acpuX_aux where X is a + CPU number starting at 0. + Example: clock-controller@2088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt new file mode 100644 index 000000000000..e628758950e1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt @@ -0,0 +1,44 @@ +Krait Processor Sub-system (KPSS) Global Clock Controller (GCC) + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: should be one of the following. The generic compatible + "qcom,kpss-gcc" should also be included. + "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc" + "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc" + "qcom,kpss-gcc-msm8974", "qcom,kpss-gcc" + "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: base address and size of the register region + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the pll parents. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "pll8_vote", "pxo". + +- clock-output-names: + Usage: required + Value type: <string> + Definition: Name of the output clock. Typically acpu_l2_aux indicating + an L2 cache auxiliary clock. + +Example: + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"; + reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu_l2_aux"; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt index 5e85749262ae..eaee06b2d8f2 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt @@ -16,11 +16,26 @@ Properties: - reg: Usage: required Value Type: <prop-encoded-array> - Definition: Start address and the the size of the register region. + Definition: The first element specifies the llcc base start address and + the size of the register region. The second element specifies + the llcc broadcast base address and size of the register region. + +- reg-names: + Usage: required + Value Type: <stringlist> + Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base". + +- interrupts: + Usage: required + Definition: The interrupt is associated with the llcc edac device. + It's used for llcc cache single and double bit error detection + and reporting. Example: cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0x1100000 0x250000>; + reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/arm/nspire.txt b/Documentation/devicetree/bindings/arm/nspire.txt deleted file mode 100644 index 4d08518bd176..000000000000 --- a/Documentation/devicetree/bindings/arm/nspire.txt +++ /dev/null @@ -1,14 +0,0 @@ -TI-NSPIRE calculators - -Required properties: -- compatible: Compatible property value should contain "ti,nspire". - CX models should have "ti,nspire-cx" - Touchpad models should have "ti,nspire-tp" - Clickpad models should have "ti,nspire-clp" - -Example: - -/ { - model = "TI-NSPIRE CX"; - compatible = "ti,nspire-cx"; - ... diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt deleted file mode 100644 index 0df6acacfaea..000000000000 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ /dev/null @@ -1,46 +0,0 @@ -* ARM Primecell Peripherals - -ARM, Ltd. Primecell peripherals have a standard id register that can be used to -identify the peripheral type, vendor, and revision. This value can be used for -driver matching. - -Required properties: - -- compatible : should be a specific name for the peripheral and - "arm,primecell". The specific name will match the ARM - engineering name for the logic block in the form: "arm,pl???" - -Optional properties: - -- arm,primecell-periphid : Value to override the h/w value with -- clocks : From common clock binding. First clock is phandle to clock for apb - pclk. Additional clocks are optional and specific to those peripherals. -- clock-names : From common clock binding. Shall be "apb_pclk" for first clock. -- dmas : From common DMA binding. If present, refers to one or more dma channels. -- dma-names : From common DMA binding, needs to match the 'dmas' property. - Devices with exactly one receive and transmit channel shall name - these "rx" and "tx", respectively. -- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- interrupts : one or more interrupt specifiers -- interrupt-names : names corresponding to the interrupts properties - -Example: - -serial@fff36000 { - compatible = "arm,pl011", "arm,primecell"; - arm,primecell-periphid = <0x00341011>; - - clocks = <&pclk>; - clock-names = "apb_pclk"; - - dmas = <&dma-controller 4>, <&dma-controller 5>; - dma-names = "rx", "tx"; - - pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; - pinctrl-names = "default","sleep"; - - interrupts = <0 11 0x4>; -}; - diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml new file mode 100644 index 000000000000..5aae37f1c563 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/primecell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Primecell Peripherals + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + ARM, Ltd. Primecell peripherals have a standard id register that can be used to + identify the peripheral type, vendor, and revision. This value can be used for + driver matching. + +properties: + compatible: + contains: + const: arm,primecell + description: + Should be a specific name for the peripheral followed by "arm,primecell". + The specific name will match the ARM engineering name for the logic block + in the form "arm,pl???" + + arm,primecell-periphid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Value to override the h/w ID value + clocks: + minItems: 1 + maxItems: 32 + clock-names: + contains: + const: apb_pclk + additionalItems: true +... diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt deleted file mode 100644 index ee532e705d6c..000000000000 --- a/Documentation/devicetree/bindings/arm/qcom.txt +++ /dev/null @@ -1,57 +0,0 @@ -QCOM device tree bindings -------------------------- - -Some qcom based bootloaders identify the dtb blob based on a set of -device properties like SoC and platform and revisions of those components. -To support this scheme, we encode this information into the board compatible -string. - -Each board must specify a top-level board compatible string with the following -format: - - compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" - -The 'SoC' and 'board' elements are required. All other elements are optional. - -The 'SoC' element must be one of the following strings: - - apq8016 - apq8074 - apq8084 - apq8096 - msm8916 - msm8974 - msm8992 - msm8994 - msm8996 - mdm9615 - ipq8074 - sdm845 - -The 'board' element must be one of the following strings: - - cdp - liquid - dragonboard - mtp - sbc - hk01 - -The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> -where the minor number may be omitted when it's zero, i.e. v1.0 is the same -as v1. If all versions of the 'board_version' elements match, then a -wildcard '*' should be used, e.g. 'v*'. - -The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. - -Examples: - - "qcom,msm8916-v1-cdp-pm8916-v2.1" - -A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version -2.1. - - "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" - -A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in -foundry 2. diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml new file mode 100644 index 000000000000..f6316ab66385 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/arm/qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM device tree bindings + +maintainers: + - Stephen Boyd <sboyd@codeaurora.org> + +description: | + Some qcom based bootloaders identify the dtb blob based on a set of + device properties like SoC and platform and revisions of those components. + To support this scheme, we encode this information into the board compatible + string. + + Each board must specify a top-level board compatible string with the following + format: + + compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]" + + The 'SoC' and 'board' elements are required. All other elements are optional. + + The 'SoC' element must be one of the following strings: + + apq8016 + apq8074 + apq8084 + apq8096 + msm8916 + msm8974 + msm8992 + msm8994 + msm8996 + mdm9615 + ipq8074 + sdm845 + + The 'board' element must be one of the following strings: + + cdp + liquid + dragonboard + mtp + sbc + hk01 + + The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor> + where the minor number may be omitted when it's zero, i.e. v1.0 is the same + as v1. If all versions of the 'board_version' elements match, then a + wildcard '*' should be used, e.g. 'v*'. + + The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9. + + Examples: + + "qcom,msm8916-v1-cdp-pm8916-v2.1" + + A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version + 2.1. + + "qcom,apq8074-v2.0-2-dragonboard/1-v0.1" + + A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in + foundry 2. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,apq8016-sbc + - const: qcom,apq8016 + + - items: + - enum: + - qcom,apq8064-cm-qs600 + - qcom,apq8064-ifc6410 + - const: qcom,apq8064 + + - items: + - enum: + - qcom,apq8074-dragonboard + - const: qcom,apq8074 + + - items: + - enum: + - qcom,apq8060-dragonboard + - qcom,msm8660-surf + - const: qcom,msm8660 + + - items: + - enum: + - qcom,apq8084-mtp + - qcom,apq8084-sbc + - const: qcom,apq8084 + + - items: + - enum: + - qcom,msm8960-cdp + - const: qcom,msm8960 + + - items: + - const: qcom,msm8916-mtp/1 + - const: qcom,msm8916-mtp + - const: qcom,msm8916 + + - items: + - const: qcom,msm8996-mtp + + - items: + - const: qcom,ipq4019 + + - items: + - enum: + - qcom,ipq8064-ap148 + - const: qcom,ipq8064 + + - items: + - enum: + - qcom,ipq8074-hk01 + - const: qcom,ipq8074 + +... diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt new file mode 100644 index 000000000000..43c80762c428 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.txt @@ -0,0 +1,17 @@ +RDA Micro platforms device tree bindings +---------------------------------------- + +RDA8810PL SoC +============= + +Required root node properties: + + - compatible : must contain "rda,8810pl" + + +Boards: + +Root node property compatible must contain, depending on board: + + - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" + - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt b/Documentation/devicetree/bindings/arm/renesas,prr.txt new file mode 100644 index 000000000000..08e482e953ca --- /dev/null +++ b/Documentation/devicetree/bindings/arm/renesas,prr.txt @@ -0,0 +1,20 @@ +Renesas Product Register + +Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that +allows to retrieve SoC product and revision information. If present, a device +node for this register should be added. + +Required properties: + - compatible: Must be one of: + "renesas,prr" + "renesas,bsid" + - reg: Base address and length of the register block. + + +Examples +-------- + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt deleted file mode 100644 index acfd3c773dd0..000000000000 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ /dev/null @@ -1,220 +0,0 @@ -Rockchip platforms device tree bindings ---------------------------------------- - -- 96boards RK3399 Ficus (ROCK960 Enterprise Edition) - Required root node properties: - - compatible = "vamrs,ficus", "rockchip,rk3399"; - -- Amarula Vyasa RK3288 board - Required root node properties: - - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; - -- Asus Tinker board - Required root node properties: - - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - -- Kylin RK3036 board: - Required root node properties: - - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036"; - -- MarsBoard RK3066 board: - Required root node properties: - - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; - -- bq Curie 2 tablet: - Required root node properties: - - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - -- ChipSPARK Rayeager PX2 board: - Required root node properties: - - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; - -- Radxa Rock board: - Required root node properties: - - compatible = "radxa,rock", "rockchip,rk3188"; - -- Radxa Rock2 Square board: - Required root node properties: - - compatible = "radxa,rock2-square", "rockchip,rk3288"; - -- Rikomagic MK808 v1 board: - Required root node properties: - - compatible = "rikomagic,mk808", "rockchip,rk3066a"; - -- Firefly Firefly-RK3288 board: - Required root node properties: - - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; - or - - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; - -- Firefly Firefly-RK3288 Reload board: - Required root node properties: - - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; - -- Firefly Firefly-RK3399 board: - Required root node properties: - - compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; - -- Firefly roc-rk3328-cc board: - Required root node properties: - - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; - -- ChipSPARK PopMetal-RK3288 board: - Required root node properties: - - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - -- Netxeon R89 board: - Required root node properties: - - compatible = "netxeon,r89", "rockchip,rk3288"; - -- GeekBuying GeekBox: - Required root node properties: - - compatible = "geekbuying,geekbox", "rockchip,rk3368"; - -- Google Bob (Asus Chromebook Flip C101PA): - Required root node properties: - compatible = "google,bob-rev13", "google,bob-rev12", - "google,bob-rev11", "google,bob-rev10", - "google,bob-rev9", "google,bob-rev8", - "google,bob-rev7", "google,bob-rev6", - "google,bob-rev5", "google,bob-rev4", - "google,bob", "google,gru", "rockchip,rk3399"; - -- Google Brain (dev-board): - Required root node properties: - - compatible = "google,veyron-brain-rev0", "google,veyron-brain", - "google,veyron", "rockchip,rk3288"; - -- Google Gru (dev-board): - Required root node properties: - - compatible = "google,gru-rev15", "google,gru-rev14", - "google,gru-rev13", "google,gru-rev12", - "google,gru-rev11", "google,gru-rev10", - "google,gru-rev9", "google,gru-rev8", - "google,gru-rev7", "google,gru-rev6", - "google,gru-rev5", "google,gru-rev4", - "google,gru-rev3", "google,gru-rev2", - "google,gru", "rockchip,rk3399"; - -- Google Jaq (Haier Chromebook 11 and more): - Required root node properties: - - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", - "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", - "google,veyron-jaq-rev1", "google,veyron-jaq", - "google,veyron", "rockchip,rk3288"; - -- Google Jerry (Hisense Chromebook C11 and more): - Required root node properties: - - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", - "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", - "google,veyron-jerry-rev3", "google,veyron-jerry", - "google,veyron", "rockchip,rk3288"; - -- Google Kevin (Samsung Chromebook Plus): - Required root node properties: - - compatible = "google,kevin-rev15", "google,kevin-rev14", - "google,kevin-rev13", "google,kevin-rev12", - "google,kevin-rev11", "google,kevin-rev10", - "google,kevin-rev9", "google,kevin-rev8", - "google,kevin-rev7", "google,kevin-rev6", - "google,kevin", "google,gru", "rockchip,rk3399"; - -- Google Mickey (Asus Chromebit CS10): - Required root node properties: - - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", - "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", - "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", - "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", - "google,veyron-mickey-rev0", "google,veyron-mickey", - "google,veyron", "rockchip,rk3288"; - -- Google Minnie (Asus Chromebook Flip C100P): - Required root node properties: - - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", - "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", - "google,veyron-minnie-rev0", "google,veyron-minnie", - "google,veyron", "rockchip,rk3288"; - -- Google Pinky (dev-board): - Required root node properties: - - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", - "google,veyron", "rockchip,rk3288"; - -- Google Speedy (Asus C201 Chromebook): - Required root node properties: - - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", - "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", - "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", - "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", - "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - -- mqmaker MiQi: - Required root node properties: - - compatible = "mqmaker,miqi", "rockchip,rk3288"; - -- Phytec phyCORE-RK3288: Rapid Development Kit - Required root node properties: - - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; - -- Pine64 Rock64 board: - Required root node properties: - - compatible = "pine64,rock64", "rockchip,rk3328"; - -- Rockchip PX3 Evaluation board: - Required root node properties: - - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; - -- Rockchip PX5 Evaluation board: - Required root node properties: - - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; - -- Rockchip RV1108 Evaluation board - Required root node properties: - - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; - -- Rockchip RK3368 evb: - Required root node properties: - - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; - -- Rockchip R88 board: - Required root node properties: - - compatible = "rockchip,r88", "rockchip,rk3368"; - -- Rockchip RK3228 Evaluation board: - Required root node properties: - - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; - -- Rockchip RK3229 Evaluation board: - - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - -- Rockchip RK3288 Fennec board: - Required root node properties: - - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - -- Rockchip RK3328 evb: - Required root node properties: - - compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; - -- Rockchip RK3399 evb: - Required root node properties: - - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire board standalone: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; - -- Rockchip RK3399 Sapphire Excavator board: - Required root node properties: - - compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399"; - -- Theobroma Systems RK3368-uQ7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3368-uq7-haikou", "rockchip,rk3368"; - -- Theobroma Systems RK3399-Q7 Haikou Baseboard: - Required root node properties: - - compatible = "tsd,rk3399-q7-haikou", "rockchip,rk3399"; - -- Tronsmart Orion R68 Meta - Required root node properties: - - compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml new file mode 100644 index 000000000000..b12958bda09c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -0,0 +1,423 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip platforms device tree bindings + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition) + items: + - const: vamrs,ficus + - const: rockchip,rk3399 + + - description: 96boards RK3399 Rock960 (ROCK960 Consumer Edition) + items: + - const: vamrs,rock960 + - const: rockchip,rk3399 + + - description: Amarula Vyasa RK3288 + items: + - const: amarula,vyasa-rk3288 + - const: rockchip,rk3288 + + - description: Asus Tinker board + items: + - const: asus,rk3288-tinker + - const: rockchip,rk3288 + + - description: Asus Tinker board S + items: + - const: asus,rk3288-tinker-s + - const: rockchip,rk3288 + + - description: bq Curie 2 tablet + items: + - const: mundoreader,bq-curie2 + - const: rockchip,rk3066a + + - description: bq Edison 2 Quad-Core tablet + items: + - const: mundoreader,bq-edison2qc + - const: rockchip,rk3188 + + - description: ChipSPARK PopMetal-RK3288 + items: + - const: chipspark,popmetal-rk3288 + - const: rockchip,rk3288 + + - description: ChipSPARK Rayeager PX2 + items: + - const: chipspark,rayeager-px2 + - const: rockchip,rk3066a + + - description: Firefly Firefly-RK3288 + items: + - enum: + - firefly,firefly-rk3288 + - firefly,firefly-rk3288-beta + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3288 Reload + items: + - const: firefly,firefly-rk3288-reload + - const: rockchip,rk3288 + + - description: Firefly Firefly-RK3399 + items: + - const: firefly,firefly-rk3399 + - const: rockchip,rk3399 + + - description: Firefly roc-rk3328-cc + items: + - const: firefly,roc-rk3328-cc + - const: rockchip,rk3328 + + - description: Firefly ROC-RK3399-PC + items: + - const: firefly,roc-rk3399-pc + - const: rockchip,rk3399 + + - description: GeekBuying GeekBox + items: + - const: geekbuying,geekbox + - const: rockchip,rk3368 + + - description: Google Bob (Asus Chromebook Flip C101PA) + items: + - const: google,bob-rev13 + - const: google,bob-rev12 + - const: google,bob-rev11 + - const: google,bob-rev10 + - const: google,bob-rev9 + - const: google,bob-rev8 + - const: google,bob-rev7 + - const: google,bob-rev6 + - const: google,bob-rev5 + - const: google,bob-rev4 + - const: google,bob + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Brain (dev-board) + items: + - const: google,veyron-brain-rev0 + - const: google,veyron-brain + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Gru (dev-board) + items: + - const: google,gru-rev15 + - const: google,gru-rev14 + - const: google,gru-rev13 + - const: google,gru-rev12 + - const: google,gru-rev11 + - const: google,gru-rev10 + - const: google,gru-rev9 + - const: google,gru-rev8 + - const: google,gru-rev7 + - const: google,gru-rev6 + - const: google,gru-rev5 + - const: google,gru-rev4 + - const: google,gru-rev3 + - const: google,gru-rev2 + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Jaq (Haier Chromebook 11 and more) + items: + - const: google,veyron-jaq-rev5 + - const: google,veyron-jaq-rev4 + - const: google,veyron-jaq-rev3 + - const: google,veyron-jaq-rev2 + - const: google,veyron-jaq-rev1 + - const: google,veyron-jaq + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Jerry (Hisense Chromebook C11 and more) + items: + - const: google,veyron-jerry-rev7 + - const: google,veyron-jerry-rev6 + - const: google,veyron-jerry-rev5 + - const: google,veyron-jerry-rev4 + - const: google,veyron-jerry-rev3 + - const: google,veyron-jerry + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Kevin (Samsung Chromebook Plus) + items: + - const: google,kevin-rev15 + - const: google,kevin-rev14 + - const: google,kevin-rev13 + - const: google,kevin-rev12 + - const: google,kevin-rev11 + - const: google,kevin-rev10 + - const: google,kevin-rev9 + - const: google,kevin-rev8 + - const: google,kevin-rev7 + - const: google,kevin-rev6 + - const: google,kevin + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Mickey (Asus Chromebit CS10) + items: + - const: google,veyron-mickey-rev8 + - const: google,veyron-mickey-rev7 + - const: google,veyron-mickey-rev6 + - const: google,veyron-mickey-rev5 + - const: google,veyron-mickey-rev4 + - const: google,veyron-mickey-rev3 + - const: google,veyron-mickey-rev2 + - const: google,veyron-mickey-rev1 + - const: google,veyron-mickey-rev0 + - const: google,veyron-mickey + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Minnie (Asus Chromebook Flip C100P) + items: + - const: google,veyron-minnie-rev4 + - const: google,veyron-minnie-rev3 + - const: google,veyron-minnie-rev2 + - const: google,veyron-minnie-rev1 + - const: google,veyron-minnie-rev0 + - const: google,veyron-minnie + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Pinky (dev-board) + items: + - const: google,veyron-pinky-rev2 + - const: google,veyron-pinky + - const: google,veyron + - const: rockchip,rk3288 + + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku7 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku7 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku7 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku7 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku7 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku7 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku7 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku7 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku7 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku7 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku7 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku7 + - const: google,scarlet-rev4 + - const: google,scarlet-rev3-sku7 + - const: google,scarlet-rev3 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10) + items: + - const: google,scarlet-rev15-sku6 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku6 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku6 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku6 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku6 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku6 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku6 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku6 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku6 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku6 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku6 + - const: google,scarlet-rev5 + - const: google,scarlet-rev4-sku6 + - const: google,scarlet-rev4 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + + - description: Google Speedy (Asus C201 Chromebook) + items: + - const: google,veyron-speedy-rev9 + - const: google,veyron-speedy-rev8 + - const: google,veyron-speedy-rev7 + - const: google,veyron-speedy-rev6 + - const: google,veyron-speedy-rev5 + - const: google,veyron-speedy-rev4 + - const: google,veyron-speedy-rev3 + - const: google,veyron-speedy-rev2 + - const: google,veyron-speedy + - const: google,veyron + - const: rockchip,rk3288 + + - description: Haoyu MarsBoard RK3066 + items: + - const: haoyu,marsboard-rk3066 + - const: rockchip,rk3066a + + - description: mqmaker MiQi + items: + - const: mqmaker,miqi + - const: rockchip,rk3288 + + - description: Netxeon R89 board + items: + - const: netxeon,r89 + - const: rockchip,rk3288 + + - description: Phytec phyCORE-RK3288 Rapid Development Kit + items: + - const: phytec,rk3288-pcm-947 + - const: phytec,rk3288-phycore-som + - const: rockchip,rk3288 + + - description: Pine64 Rock64 + items: + - const: pine64,rock64 + - const: rockchip,rk3328 + + - description: Pine64 RockPro64 + items: + - const: pine64,rockpro64 + - const: rockchip,rk3399 + + - description: Radxa Rock + items: + - const: radxa,rock + - const: rockchip,rk3188 + + - description: Radxa Rock2 Square + items: + - const: radxa,rock2-square + - const: rockchip,rk3288 + + - description: Rikomagic MK808 v1 + items: + - const: rikomagic,mk808 + - const: rockchip,rk3066a + + - description: Rockchip Kylin + items: + - const: rockchip,kylin-rk3036 + - const: rockchip,rk3036 + + - description: Rockchip PX3 Evaluation board + items: + - const: rockchip,px3-evb + - const: rockchip,px3 + - const: rockchip,rk3188 + + - description: Rockchip PX30 Evaluation board + items: + - const: rockchip,px30-evb + - const: rockchip,px30 + + - description: Rockchip PX5 Evaluation board + items: + - const: rockchip,px5-evb + - const: rockchip,px5 + - const: rockchip,rk3368 + + - description: Rockchip R88 + items: + - const: rockchip,r88 + - const: rockchip,rk3368 + + - description: Rockchip RK3228 Evaluation board + items: + - const: rockchip,rk3228-evb + - const: rockchip,rk3228 + + - description: Rockchip RK3229 Evaluation board + items: + - const: rockchip,rk3229-evb + - const: rockchip,rk3229 + + - description: Rockchip RK3288 Evaluation board + items: + - enum: + - rockchip,rk3288-evb-act8846 + - rockchip,rk3288-evb-rk808 + - const: rockchip,rk3288 + + - description: Rockchip RK3288 Fennec + items: + - const: rockchip,rk3288-fennec + - const: rockchip,rk3288 + + - description: Rockchip RK3328 Evaluation board + items: + - const: rockchip,rk3328-evb + - const: rockchip,rk3328 + + - description: Rockchip RK3368 Evaluation board (act8846 pmic) + items: + - const: rockchip,rk3368-evb-act8846 + - const: rockchip,rk3368 + + - description: Rockchip RK3399 Evaluation board + items: + - const: rockchip,rk3399-evb + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire standalone + items: + - const: rockchip,rk3399-sapphire + - const: rockchip,rk3399 + + - description: Rockchip RK3399 Sapphire with Excavator Baseboard + items: + - const: rockchip,rk3399-sapphire-excavator + - const: rockchip,rk3399 + + - description: Rockchip RV1108 Evaluation board + items: + - const: rockchip,rv1108-evb + - const: rockchip,rv1108 + + - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard + items: + - const: tsd,rk3368-uq7-haikou + - const: rockchip,rk3368 + + - description: Theobroma Systems RK3399-Q7 with Haikou baseboard + items: + - const: tsd,rk3399-q7-haikou + - const: rockchip,rk3399 + + - description: Tronsmart Orion R68 Meta + items: + - const: tronsmart,orion-r68-meta + - const: rockchip,rk3368 +... diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt index 08a587875996..74d0a780ce51 100644 --- a/Documentation/devicetree/bindings/arm/scu.txt +++ b/Documentation/devicetree/bindings/arm/scu.txt @@ -22,7 +22,7 @@ References: Example: -scu@a04100000 { +scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt index e31303fb233a..f27bbff2c780 100644 --- a/Documentation/devicetree/bindings/arm/secure.txt +++ b/Documentation/devicetree/bindings/arm/secure.txt @@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These secure- bindings only need to be used where both the Secure and Normal world views need to be described in a single device tree. -Valid Secure world properties: +Valid Secure world properties +----------------------------- - secure-status : specifies whether the device is present and usable in the secure world. The combination of this with "status" allows @@ -51,3 +52,19 @@ Valid Secure world properties: status = "disabled"; secure-status = "okay"; /* S-only */ status = "disabled"; /* disabled in both */ status = "disabled"; secure-status = "disabled"; /* disabled in both */ + +The secure-chosen node +---------------------- + +Similar to the /chosen node which serves as a place for passing data +between firmware and the operating system, the /secure-chosen node may +be used to pass data to the Secure OS. Only the properties defined +below may appear in the /secure-chosen node. + +- stdout-path : specifies the device to be used by the Secure OS for + its console output. The syntax is the same as for /chosen/stdout-path. + If the /secure-chosen node exists but the stdout-path property is not + present, the Secure OS should not perform any console output. If + /secure-chosen does not exist, the Secure OS should use the value of + /chosen/stdout-path instead (that is, use the same device as the + Normal world OS). diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 89b4a389fbc7..7f91c2a8b54e 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -7,6 +7,8 @@ SoCs: compatible = "renesas,emev2" - RZ/A1H (R7S72100) compatible = "renesas,r7s72100" + - RZ/A2 (R7S9210) + compatible = "renesas,r7s9210" - SH-Mobile AG5 (R8A73A00/SH73A0) compatible = "renesas,sh73a0" - R-Mobile APE6 (R8A73A40) @@ -23,6 +25,10 @@ SoCs: compatible = "renesas,r8a7745" - RZ/G1C (R8A77470) compatible = "renesas,r8a77470" + - RZ/G2M (R8A774A1) + compatible = "renesas,r8a774a1" + - RZ/G2E (R8A774C0) + compatible = "renesas,r8a774c0" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" - R-Car H1 (R8A77790) @@ -95,6 +101,10 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744" + - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + compatible = "iwave,g20m", "renesas,r8a7744" - Kingfisher (SBEV-RCAR-KF-M03) compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) @@ -107,6 +117,8 @@ Boards: compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) compatible = "renesas,m3ulcb", "renesas,r8a7796" + - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + compatible = "renesas,m3nulcb", "renesas,r8a77965" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -141,21 +153,3 @@ Boards: compatible = "renesas,v3msk", "renesas,r8a77970" - Wheat (RTP0RC7792ASKB0000JE) compatible = "renesas,wheat", "renesas,r8a7792" - - -Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC -product and revision information. If present, a device node for this register -should be added. - -Required properties: - - compatible: Must be "renesas,prr". - - reg: Base address and length of the register block. - - -Examples --------- - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt deleted file mode 100644 index 7b28ee6fee91..000000000000 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ /dev/null @@ -1,11 +0,0 @@ -CSR SiRFprimaII and SiRFmarco device tree bindings. -======================================== - -Required root node properties: - - compatible: - - "sirf,atlas6-cb" : atlas6 "cb" evaluation board - - "sirf,atlas6" : atlas6 device based board - - "sirf,atlas7-cb" : atlas7 "cb" evaluation board - - "sirf,atlas7" : atlas7 device based board - - "sirf,prima2-cb" : prima2 "cb" evaluation board - - "sirf,prima2" : prima2 device based board diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml new file mode 100644 index 000000000000..0b597032c923 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sirf.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sirf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CSR SiRFprimaII and SiRFmarco device tree bindings. + +maintainers: + - Binghua Duan <binghua.duan@csr.com> + - Barry Song <Baohua.Song@csr.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - const: sirf,atlas6-cb + - const: sirf,atlas6 + - items: + - const: sirf,atlas7-cb + - const: sirf,atlas7 + - items: + - const: sirf,prima2-cb + - const: sirf,prima2 +... diff --git a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt index d27a646f48a9..d27a646f48a9 100644 --- a/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt +++ b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt new file mode 100644 index 000000000000..b3ed1033740e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt @@ -0,0 +1,47 @@ +Socionext UniPhier SoC family +----------------------------- + +Required properties in the root node: + - compatible: should contain board and SoC compatible strings + +SoC and board compatible strings: + (sorted chronologically) + + - LD4 SoC: "socionext,uniphier-ld4" + - Reference Board: "socionext,uniphier-ld4-ref" + + - Pro4 SoC: "socionext,uniphier-pro4" + - Reference Board: "socionext,uniphier-pro4-ref" + - Ace Board: "socionext,uniphier-pro4-ace" + - Sanji Board: "socionext,uniphier-pro4-sanji" + + - sLD8 SoC: "socionext,uniphier-sld8" + - Reference Board: "socionext,uniphier-sld8-ref" + + - PXs2 SoC: "socionext,uniphier-pxs2" + - Gentil Board: "socionext,uniphier-pxs2-gentil" + - Vodka Board: "socionext,uniphier-pxs2-vodka" + + - LD6b SoC: "socionext,uniphier-ld6b" + - Reference Board: "socionext,uniphier-ld6b-ref" + + - LD11 SoC: "socionext,uniphier-ld11" + - Reference Board: "socionext,uniphier-ld11-ref" + - Global Board: "socionext,uniphier-ld11-global" + + - LD20 SoC: "socionext,uniphier-ld20" + - Reference Board: "socionext,uniphier-ld20-ref" + - Global Board: "socionext,uniphier-ld20-global" + + - PXs3 SoC: "socionext,uniphier-pxs3" + - Reference Board: "socionext,uniphier-pxs3-ref" + +Example: + +/dts-v1/; + +/ { + compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; + + ... +}; diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 1b2ab1ff5587..46652bf65147 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -4,7 +4,7 @@ SP810 System Controller Required properties: - compatible: standard compatible string for a Primecell peripheral, - see Documentation/devicetree/bindings/arm/primecell.txt + see Documentation/devicetree/bindings/arm/primecell.yaml for more details should be: "arm,sp810", "arm,primecell" diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt deleted file mode 100644 index 0d42949df6c2..000000000000 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ /dev/null @@ -1,26 +0,0 @@ -ST SPEAr Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST SPEAr600 SoC shall have the following properties: -Required root node property: -compatible = "st,spear600"; - -Boards with the ST SPEAr300 SoC shall have the following properties: -Required root node property: -compatible = "st,spear300"; - -Boards with the ST SPEAr310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear310"; - -Boards with the ST SPEAr320 SoC shall have the following properties: -Required root node property: -compatible = "st,spear320"; - -Boards with the ST SPEAr1310 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1310"; - -Boards with the ST SPEAr1340 SoC shall have the following properties: -Required root node property: -compatible = "st,spear1340"; diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml new file mode 100644 index 000000000000..f6ec731c9531 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/spear.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr Platforms Device Tree Bindings + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + - Stefan Roese <sr@denx.de> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,spear600 + - st,spear300 + - st,spear310 + - st,spear320 + - st,spear1310 + - st,spear1340 +... diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt deleted file mode 100644 index 8d27f6b084c7..000000000000 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ /dev/null @@ -1,23 +0,0 @@ -ST STi Platforms Device Tree Bindings ---------------------------------------- - -Boards with the ST STiH415 SoC shall have the following properties: -Required root node property: -compatible = "st,stih415"; - -Boards with the ST STiH416 SoC shall have the following properties: -Required root node property: -compatible = "st,stih416"; - -Boards with the ST STiH407 SoC shall have the following properties: -Required root node property: -compatible = "st,stih407"; - -Boards with the ST STiH410 SoC shall have the following properties: -Required root node property: -compatible = "st,stih410"; - -Boards with the ST STiH418 SoC shall have the following properties: -Required root node property: -compatible = "st,stih418"; - diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml new file mode 100644 index 000000000000..47f9b8eebaa0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sti.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST STi Platforms Device Tree Bindings + +maintainers: + - Patrice Chotard <patrice.chotard@st.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - st,stih415 + - st,stih416 + - st,stih407 + - st,stih410 + - st,stih418 +... diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index e4beec3d9ad3..9254cbe7d516 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,8 +14,10 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 - allwinner-sun8i-r40 + allwinner,sun8i-r40 + allwinner,sun8i-t3 allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 + allwinner,suniv-f1c100s nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/syna.txt index 3bab18409b7a..2face46a5f64 100644 --- a/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/syna.txt @@ -1,4 +1,9 @@ -Marvell Berlin SoC Family Device Tree Bindings +Synaptics SoC Device Tree Bindings + +According to https://www.synaptics.com/company/news/conexant-marvell +Synaptics has acquired the Multimedia Solutions Business of Marvell, so +berlin SoCs are now Synaptics' SoCs now. + --------------------------------------------------------------- Work in progress statement: @@ -13,6 +18,10 @@ stable binding/ABI. --------------------------------------------------------------- +Boards with the Synaptics AS370 SoC shall have the following properties: + Required root node property: + compatible: "syna,as370" + Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt deleted file mode 100644 index 32f62bb7006d..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ /dev/null @@ -1,60 +0,0 @@ -NVIDIA Tegra device tree bindings -------------------------------------------- - -SoCs -------------------------------------------- - -Each device tree must specify which Tegra SoC it uses, using one of the -following compatible values: - - nvidia,tegra20 - nvidia,tegra30 - nvidia,tegra114 - nvidia,tegra124 - nvidia,tegra132 - nvidia,tegra210 - nvidia,tegra186 - nvidia,tegra194 - -Boards -------------------------------------------- - -Each device tree must specify which one or more of the following -board-specific compatible values: - - ad,medcom-wide - ad,plutux - ad,tamonten - ad,tec - compal,paz00 - compulab,trimslice - nvidia,beaver - nvidia,cardhu - nvidia,cardhu-a02 - nvidia,cardhu-a04 - nvidia,dalmore - nvidia,harmony - nvidia,jetson-tk1 - nvidia,norrin - nvidia,p2371-0000 - nvidia,p2371-2180 - nvidia,p2571 - nvidia,p2771-0000 - nvidia,p2972-0000 - nvidia,roth - nvidia,seaboard - nvidia,tn7 - nvidia,ventana - toradex,apalis_t30 - toradex,apalis_t30-eval - toradex,apalis-tk1 - toradex,apalis-tk1-eval - toradex,colibri_t20-512 - toradex,colibri_t30 - toradex,colibri_t30-eval-v3 - toradex,iris - -Trusted Foundations -------------------------------------------- -Tegra supports the Trusted Foundation secure monitor. See the -"tlm,trusted-foundations" binding's documentation for more details. diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml new file mode 100644 index 000000000000..fbcde8a7e067 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra device tree bindings + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - compal,paz00 + - compulab,trimslice + - nvidia,harmony + - nvidia,seaboard + - nvidia,ventana + - const: nvidia,tegra20 + - items: + - enum: + - ad,medcom-wide + - ad,plutux + - ad,tec + - const: ad,tamonten + - const: nvidia,tegra20 + - items: + - enum: + - toradex,colibri_t20-eval-v3 + - toradex,colibri_t20-iris + - const: toradex,colibri_t20 + - const: nvidia,tegra20 + - items: + - enum: + - nvidia,beaver + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,cardhu-a02 + - nvidia,cardhu-a04 + - const: nvidia,cardhu + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - const: toradex,apalis_t30-eval-v1.1 + - const: toradex,apalis_t30-eval + - const: toradex,apalis_t30-v1.1 + - const: toradex,apalis_t30 + - const: nvidia,tegra30 + - items: + - enum: + - toradex,colibri_t30-eval-v3 + - const: toradex,colibri_t30 + - const: nvidia,tegra30 + - items: + - enum: + - nvidia,dalmore + - nvidia,roth + - nvidia,tn7 + - const: nvidia,tegra114 + - items: + - enum: + - nvidia,jetson-tk1 + - nvidia,venice2 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - const: toradex,apalis-tk1-v1.2-eval + - const: toradex,apalis-tk1-eval + - const: toradex,apalis-tk1-v1.2 + - const: toradex,apalis-tk1 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,norrin + - const: nvidia,tegra132 + - const: nvidia,tegra124 + - items: + - enum: + - nvidia,p2371-0000 + - nvidia,p2371-2180 + - nvidia,p2571 + - const: nvidia,tegra210 + - items: + - enum: + - nvidia,p2771-0000 + - const: nvidia,tegra186 + - items: + - enum: + - nvidia,p2972-0000 + - const: nvidia,tegra194 diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt index 5a3bf7c5a7a0..2d89cdc39eb0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt @@ -15,6 +15,9 @@ Required properties: Optional properties: - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value must be 2. Example: @@ -34,3 +37,96 @@ Board DTS: pmc@c360000 { nvidia,invert-interrupt; }; + +== Pad Control == + +On Tegra SoCs a pad is a set of pins which are configured as a group. +The pin grouping is a fixed attribute of the hardware. The PMC can be +used to set pad power state and signaling voltage. A pad can be either +in active or power down mode. The support for power state and signaling +voltage configuration varies depending on the pad in question. 3.3 V and +1.8 V signaling voltages are supported on pins where software +controllable signaling voltage switching is available. + +Pad configurations are described with pin configuration nodes which +are placed under the pmc node and they are referred to by the pinctrl +client properties. For more information see +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + +The following pads are present on Tegra186: +csia csib dsi mipi-bias +pex-clk-bias pex-clk3 pex-clk2 pex-clk1 +usb0 usb1 usb2 usb-bias +uart audio hsic dbg +hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv +sdmmc4 cam dsib dsic +dsid csic csid csie +dsif spi ufs dmic-hv +edp sdmmc1-hv sdmmc3-hv conn +audio-hv ao-hv + +Required pin configuration properties: + - pins: A list of strings, each of which contains the name of a pad + to be configured. + +Optional pin configuration properties: + - low-power-enable: Configure the pad into power down mode + - low-power-disable: Configure the pad into active mode + - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + +Note: The power state can be configured on all of the above pads except + for ao-hv. Following pads have software configurable signaling + voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv, + ao-hv. + +Pad configuration state example: + pmc: pmc@7000e400 { + compatible = "nvidia,tegra186-pmc"; + reg = <0 0x0c360000 0 0x10000>, + <0 0x0c370000 0 0x10000>, + <0 0x0c380000 0 0x10000>, + <0 0x0c390000 0 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + + ... + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + hdmi_off: hdmi-off { + pins = "hdmi"; + low-power-enable; + } + + hdmi_on: hdmi-on { + pins = "hdmi"; + low-power-disable; + } + }; + +Pinctrl client example: + sdmmc1: sdhci@3400000 { + ... + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; + + ... + + sor0: sor@15540000 { + ... + pinctrl-0 = <&hdmi_off>; + pinctrl-1 = <&hdmi_on>; + pinctrl-names = "hdmi-on", "hdmi-off"; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt deleted file mode 100644 index 4c33b29dc660..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt +++ /dev/null @@ -1,100 +0,0 @@ -Embedded Memory Controller - -Properties: -- name : Should be emc -- #address-cells : Should be 1 -- #size-cells : Should be 0 -- compatible : Should contain "nvidia,tegra20-emc". -- reg : Offset and length of the register set for the device -- nvidia,use-ram-code : If present, the sub-nodes will be addressed - and chosen using the ramcode board selector. If omitted, only one - set of tables can be present and said tables will be used - irrespective of ram-code configuration. - -Child device nodes describe the memory settings for different configurations and clock rates. - -Example: - - memory-controller@7000f400 { - #address-cells = < 1 >; - #size-cells = < 0 >; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f4000 0x200>; - } - - -Embedded Memory Controller ram-code table - -If the emc node has the nvidia,use-ram-code property present, then the -next level of nodes below the emc table are used to specify which settings -apply for which ram-code settings. - -If the emc node lacks the nvidia,use-ram-code property, this level is omitted -and the tables are stored directly under the emc node (see below). - -Properties: - -- name : Should be emc-tables -- nvidia,ram-code : the binary representation of the ram-code board strappings - for which this node (and children) are valid. - - - -Embedded Memory Controller configuration table - -This is a table containing the EMC register settings for the various -operating speeds of the memory controller. They are always located as -subnodes of the emc controller node. - -There are two ways of specifying which tables to use: - -* The simplest is if there is just one set of tables in the device tree, - and they will always be used (based on which frequency is used). - This is the preferred method, especially when firmware can fill in - this information based on the specific system information and just - pass it on to the kernel. - -* The slightly more complex one is when more than one memory configuration - might exist on the system. The Tegra20 platform handles this during - early boot by selecting one out of possible 4 memory settings based - on a 2-pin "ram code" bootstrap setting on the board. The values of - these strappings can be read through a register in the SoC, and thus - used to select which tables to use. - -Properties: -- name : Should be emc-table -- compatible : Should contain "nvidia,tegra20-emc-table". -- reg : either an opaque enumerator to tell different tables apart, or - the valid frequency for which the table should be used (in kHz). -- clock-frequency : the clock frequency for the EMC at which this - table should be used (in kHz). -- nvidia,emc-registers : a 46 word array of EMC registers to be programmed - for operation at the 'clock-frequency' setting. - The order and contents of the registers are: - RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, - WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, - PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, - TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, - ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, - ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, - CFG_CLKTRIM_1, CFG_CLKTRIM_2 - - emc-table@166000 { - reg = <166000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 166000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; - - emc-table@333000 { - reg = <333000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 333000 >; - nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 >; - }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index a74b37b07e5c..cb12f33a247f 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -195,3 +195,106 @@ Example: power-domains = <&pd_audio>; ... }; + +== Pad Control == + +On Tegra SoCs a pad is a set of pins which are configured as a group. +The pin grouping is a fixed attribute of the hardware. The PMC can be +used to set pad power state and signaling voltage. A pad can be either +in active or power down mode. The support for power state and signaling +voltage configuration varies depending on the pad in question. 3.3 V and +1.8 V signaling voltages are supported on pins where software +controllable signaling voltage switching is available. + +The pad configuration state nodes are placed under the pmc node and they +are referred to by the pinctrl client properties. For more information +see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. +The pad name should be used as the value of the pins property in pin +configuration nodes. + +The following pads are present on Tegra124 and Tegra132: +audio bb cam comp +csia csb cse dsi +dsib dsic dsid hdmi +hsic hv lvds mipi-bias +nand pex-bias pex-clk1 pex-clk2 +pex-cntrl sdmmc1 sdmmc3 sdmmc4 +sys_ddc uart usb0 usb1 +usb2 usb_bias + +The following pads are present on Tegra210: +audio audio-hv cam csia +csib csic csid csie +csif dbg debug-nonao dmic +dp dsi dsib dsic +dsid emmc emmc2 gpio +hdmi hsic lvds mipi-bias +pex-bias pex-clk1 pex-clk2 pex-cntrl +sdmmc1 sdmmc3 spi spi-hv +uart usb0 usb1 usb2 +usb3 usb-bias + +Required pin configuration properties: + - pins: Must contain name of the pad(s) to be configured. + +Optional pin configuration properties: + - low-power-enable: Configure the pad into power down mode + - low-power-disable: Configure the pad into active mode + - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 + or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + +Note: The power state can be configured on all of the Tegra124 and + Tegra132 pads. None of the Tegra124 or Tegra132 pads support + signaling voltage switching. + +Note: All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported on + following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, + pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. + +Pad configuration state example: + pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + + ... + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + hdmi_off: hdmi-off { + pins = "hdmi"; + low-power-enable; + } + + hdmi_on: hdmi-on { + pins = "hdmi"; + low-power-disable; + } + }; + +Pinctrl client example: + sdmmc1: sdhci@700b0000 { + ... + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; + ... + sor@54540000 { + ... + pinctrl-0 = <&hdmi_off>; + pinctrl-1 = <&hdmi_on>; + pinctrl-names = "hdmi-on", "hdmi-off"; + }; diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml new file mode 100644 index 000000000000..e372b43da62f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/nspire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-NSPIRE calculators + +maintainers: + - Daniel Tang <dt.tangr@gmail.com> + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + # CX models + - ti,nspire-cx + # Touchpad models + - ti,nspire-tp + # Clickpad models + - ti,nspire-clp +... diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml new file mode 100644 index 000000000000..4326d2cfa15d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/ti/davinci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments DaVinci Platforms Device Tree Bindings + +maintainers: + - Sekhar Nori <nsekhar@ti.com> + +description: + DA850/OMAP-L138/AM18x based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ti,da850-evm # DA850/OMAP-L138/AM18x Evaluation Module (EVM) board + - ti,da850-lcdk # DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board + - enbw,cmc # EnBW AM1808 based CMC board + - lego,ev3 # LEGO MINDSTORMS EV3 (AM1808 based) + - const: ti,da850 +... diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt index de9eb0486630..b0d80c0fb265 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/arm/topology.txt @@ -472,4 +472,4 @@ cpus { =============================================================================== [1] ARM Linux kernel documentation - Documentation/devicetree/bindings/arm/cpus.txt + Documentation/devicetree/bindings/arm/cpus.yaml diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt index 0fa429534f49..89408de55bfd 100644 --- a/Documentation/devicetree/bindings/arm/ux500/boards.txt +++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt @@ -60,7 +60,7 @@ Example: <0xa0410100 0x100>; }; - scu@a04100000 { + scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt deleted file mode 100644 index 87dc1ddf4770..000000000000 --- a/Documentation/devicetree/bindings/arm/vt8500.txt +++ /dev/null @@ -1,22 +0,0 @@ -VIA/Wondermedia VT8500 Platforms Device Tree Bindings ---------------------------------------- - -Boards with the VIA VT8500 SoC shall have the following properties: -Required root node property: -compatible = "via,vt8500"; - -Boards with the Wondermedia WM8505 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8505"; - -Boards with the Wondermedia WM8650 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8650"; - -Boards with the Wondermedia WM8750 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8750"; - -Boards with the Wondermedia WM8850 SoC shall have the following properties: -Required root node property: -compatible = "wm,wm8850"; diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml new file mode 100644 index 000000000000..7b25b6fa34e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/vt8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings + +maintainers: + - Tony Prisk <linux@prisktech.co.nz> +description: test + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - via,vt8500 + - wm,wm8505 + - wm,wm8650 + - wm,wm8750 + - wm,wm8850 diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt deleted file mode 100644 index 26fe5ecc4332..000000000000 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Xilinx Zynq Platforms Device Tree Bindings - -Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynq-7000"; - -Additional compatible strings: - -- Adapteva Parallella board - "adapteva,parallella" - -- Avnet MicroZed board - "avnet,zynq-microzed" - "xlnx,zynq-microzed" - -- Avnet ZedBoard board - "avnet,zynq-zed" - "xlnx,zynq-zed" - -- Digilent Zybo board - "digilent,zynq-zybo" - -- Digilent Zybo Z7 board - "digilent,zynq-zybo-z7" - -- Xilinx CC108 internal board - "xlnx,zynq-cc108" - -- Xilinx ZC702 internal board - "xlnx,zynq-zc702" - -- Xilinx ZC706 internal board - "xlnx,zynq-zc706" - -- Xilinx ZC770 internal board, with different FMC cards - "xlnx,zynq-zc770-xm010" - "xlnx,zynq-zc770-xm011" - "xlnx,zynq-zc770-xm012" - "xlnx,zynq-zc770-xm013" - ---------------------------------------------------------------- - -Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings - -Boards with ZynqMP SOC based on an ARM Cortex A53 processor -shall have the following properties. - -Required root node properties: - - compatible = "xlnx,zynqmp"; - - -Additional compatible strings: - -- Xilinx internal board zc1232 - "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232" - -- Xilinx internal board zc1254 - "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254" - -- Xilinx internal board zc1275 - "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275" - -- Xilinx internal board zc1751 - "xlnx,zynqmp-zc1751" - -- Xilinx 96boards compatible board zcu100 - "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100" - -- Xilinx evaluation board zcu102 - "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102" - "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102" - -- Xilinx evaluation board zcu104 - "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104" - -- Xilinx evaluation board zcu106 - "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106" - -- Xilinx evaluation board zcu111 - "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111" diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml new file mode 100644 index 000000000000..c73b1f5c7f49 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Platforms Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +description: | + Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - adapteva,parallella + - digilent,zynq-zybo + - digilent,zynq-zybo-z7 + - xlnx,zynq-cc108 + - xlnx,zynq-zc702 + - xlnx,zynq-zc706 + - xlnx,zynq-zc770-xm010 + - xlnx,zynq-zc770-xm011 + - xlnx,zynq-zc770-xm012 + - xlnx,zynq-zc770-xm013 + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-microzed + - const: xlnx,zynq-microzed + - const: xlnx,zynq-7000 + + - items: + - const: avnet,zynq-zed + - const: xlnx,zynq-zed + - const: xlnx,zynq-7000 + + - items: + - enum: + - xlnx,zynqmp-zc1751 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1232 + items: + - const: xlnx,zynqmp-zc1232-revA + - const: xlnx,zynqmp-zc1232 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1254 + items: + - const: xlnx,zynqmp-zc1254-revA + - const: xlnx,zynqmp-zc1254 + - const: xlnx,zynqmp + + - description: Xilinx internal board zc1275 + items: + - const: xlnx,zynqmp-zc1275-revA + - const: xlnx,zynqmp-zc1275 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board zcu100 + items: + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx 96boards compatible board Ultra96 + items: + - const: avnet,ultra96-rev1 + - const: avnet,ultra96 + - const: xlnx,zynqmp-zcu100-revC + - const: xlnx,zynqmp-zcu100 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu102 + items: + - enum: + - xlnx,zynqmp-zcu102-revA + - xlnx,zynqmp-zcu102-revB + - xlnx,zynqmp-zcu102-rev1.0 + - const: xlnx,zynqmp-zcu102 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu104 + items: + - enum: + - xlnx,zynqmp-zcu104-revA + - xlnx,zynqmp-zcu104-rev1.0 + - const: xlnx,zynqmp-zcu104 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu106 + items: + - enum: + - xlnx,zynqmp-zcu106-revA + - xlnx,zynqmp-zcu106-rev1.0 + - const: xlnx,zynqmp-zcu106 + - const: xlnx,zynqmp + + - description: Xilinx evaluation board zcu111 + items: + - enum: + - xlnx,zynqmp-zcu111-revA + - xlnx,zynqmp-zcu11-rev1.0 + - const: xlnx,zynqmp-zcu111 + - const: xlnx,zynqmp + +... diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt index 83369785d29c..7e66b7f7ba96 100644 --- a/Documentation/devicetree/bindings/arm/zte.txt +++ b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt @@ -1,9 +1,6 @@ -ZTE platforms device tree bindings ---------------------------------------- +ZTE sysctrl Registers -- ZX296702 board: - Required root node properties: - - compatible = "zte,zx296702-ad1", "zte,zx296702" +Registers for 'zte,zx296702' SoC: System management required properties: - compatible = "zte,sysctrl" @@ -15,13 +12,7 @@ Bus matrix required properties: - compatible = "zte,zx-bus-matrix" ---------------------------------------- -- ZX296718 SoC: - Required root node properties: - - compatible = "zte,zx296718" - -ZX296718 EVB board: - - "zte,zx296718-evb" +Registers for 'zte,zx296718' SoC: System management required properties: - compatible = "zte,zx296718-aon-sysctrl" diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml new file mode 100644 index 000000000000..2d3fefdccdff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/zte.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/zte.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ZTE platforms device tree bindings + +maintainers: + - Jun Nie <jun.nie@linaro.org> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - zte,zx296702-ad1 + - const: zte,zx296702 + - items: + - enum: + - zte,zx296718-evb + - const: zte,zx296718 + +... |