diff options
Diffstat (limited to 'Documentation/admin-guide/pm')
| -rw-r--r-- | Documentation/admin-guide/pm/amd-pstate.rst | 720 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/cpufreq.rst | 17 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/cpuidle.rst | 127 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/intel-speed-select.rst | 939 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/intel_idle.rst | 33 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/intel_pstate.rst | 139 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst | 115 | ||||
| -rw-r--r-- | Documentation/admin-guide/pm/working-state.rst | 3 |
8 files changed, 1926 insertions, 167 deletions
diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst new file mode 100644 index 000000000000..9eb26014d34b --- /dev/null +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -0,0 +1,720 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=============================================== +``amd-pstate`` CPU Performance Scaling Driver +=============================================== + +:Copyright: |copy| 2021 Advanced Micro Devices, Inc. + +:Author: Huang Rui <ray.huang@amd.com> + + +Introduction +=================== + +``amd-pstate`` is the AMD CPU performance scaling driver that introduces a +new CPU frequency control mechanism on modern AMD APU and CPU series in +Linux kernel. The new mechanism is based on Collaborative Processor +Performance Control (CPPC) which provides finer grain frequency management +than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using +the ACPI P-states driver to manage CPU frequency and clocks with switching +only in 3 P-states. CPPC replaces the ACPI P-states controls and allows a +flexible, low-latency interface for the Linux kernel to directly +communicate the performance hints to hardware. + +``amd-pstate`` leverages the Linux kernel governors such as ``schedutil``, +``ondemand``, etc. to manage the performance hints which are provided by +CPPC hardware functionality that internally follows the hardware +specification (for details refer to AMD64 Architecture Programmer's Manual +Volume 2: System Programming [1]_). Currently, ``amd-pstate`` supports basic +frequency control function according to kernel governors on some of the +Zen2 and Zen3 processors, and we will implement more AMD specific functions +in future after we verify them on the hardware and SBIOS. + + +AMD CPPC Overview +======================= + +Collaborative Processor Performance Control (CPPC) interface enumerates a +continuous, abstract, and unit-less performance value in a scale that is +not tied to a specific performance state / frequency. This is an ACPI +standard [2]_ which software can specify application performance goals and +hints as a relative target to the infrastructure limits. AMD processors +provide the low latency register model (MSR) instead of an AML code +interpreter for performance adjustments. ``amd-pstate`` will initialize a +``struct cpufreq_driver`` instance, ``amd_pstate_driver``, with the callbacks +to manage each performance update behavior. :: + + Highest Perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | Max Perf ---->| | + | | | | + | | | | + Nominal Perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | Desired Perf ---->| | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + | | | | + Lowest non- | | | | + linear perf ------>+-----------------------+ +-----------------------+ + | | | | + | | Lowest perf ---->| | + | | | | + Lowest perf ------>+-----------------------+ +-----------------------+ + | | | | + | | | | + | | | | + 0 ------>+-----------------------+ +-----------------------+ + + AMD P-States Performance Scale + + +.. _perf_cap: + +AMD CPPC Performance Capability +-------------------------------- + +Highest Performance (RO) +......................... + +This is the absolute maximum performance an individual processor may reach, +assuming ideal conditions. This performance level may not be sustainable +for long durations and may only be achievable if other platform components +are in a specific state; for example, it may require other processors to be in +an idle state. This would be equivalent to the highest frequencies +supported by the processor. + +Nominal (Guaranteed) Performance (RO) +...................................... + +This is the maximum sustained performance level of the processor, assuming +ideal operating conditions. In the absence of an external constraint (power, +thermal, etc.), this is the performance level the processor is expected to +be able to maintain continuously. All cores/processors are expected to be +able to sustain their nominal performance state simultaneously. + +Lowest non-linear Performance (RO) +................................... + +This is the lowest performance level at which nonlinear power savings are +achieved, for example, due to the combined effects of voltage and frequency +scaling. Above this threshold, lower performance levels should be generally +more energy efficient than higher performance levels. This register +effectively conveys the most efficient performance level to ``amd-pstate``. + +Lowest Performance (RO) +........................ + +This is the absolute lowest performance level of the processor. Selecting a +performance level lower than the lowest nonlinear performance level may +cause an efficiency penalty but should reduce the instantaneous power +consumption of the processor. + +AMD CPPC Performance Control +------------------------------ + +``amd-pstate`` passes performance goals through these registers. The +register drives the behavior of the desired performance target. + +Minimum requested performance (RW) +................................... + +``amd-pstate`` specifies the minimum allowed performance level. + +Maximum requested performance (RW) +................................... + +``amd-pstate`` specifies a limit the maximum performance that is expected +to be supplied by the hardware. + +Desired performance target (RW) +................................... + +``amd-pstate`` specifies a desired target in the CPPC performance scale as +a relative number. This can be expressed as percentage of nominal +performance (infrastructure max). Below the nominal sustained performance +level, desired performance expresses the average performance level of the +processor subject to hardware. Above the nominal performance level, +the processor must provide at least nominal performance requested and go higher +if current operating conditions allow. + +Energy Performance Preference (EPP) (RW) +......................................... + +This attribute provides a hint to the hardware if software wants to bias +toward performance (0x0) or energy efficiency (0xff). + + +Key Governors Support +======================= + +``amd-pstate`` can be used with all the (generic) scaling governors listed +by the ``scaling_available_governors`` policy attribute in ``sysfs``. Then, +it is responsible for the configuration of policy objects corresponding to +CPUs and provides the ``CPUFreq`` core (and the scaling governors attached +to the policy objects) with accurate information on the maximum and minimum +operating frequencies supported by the hardware. Users can check the +``scaling_cur_freq`` information comes from the ``CPUFreq`` core. + +``amd-pstate`` mainly supports ``schedutil`` and ``ondemand`` for dynamic +frequency control. It is to fine tune the processor configuration on +``amd-pstate`` to the ``schedutil`` with CPU CFS scheduler. ``amd-pstate`` +registers the adjust_perf callback to implement performance update behavior +similar to CPPC. It is initialized by ``sugov_start`` and then populates the +CPU's update_util_data pointer to assign ``sugov_update_single_perf`` as the +utilization update callback function in the CPU scheduler. The CPU scheduler +will call ``cpufreq_update_util`` and assigns the target performance according +to the ``struct sugov_cpu`` that the utilization update belongs to. +Then, ``amd-pstate`` updates the desired performance according to the CPU +scheduler assigned. + +.. _processor_support: + +Processor Support +======================= + +The ``amd-pstate`` initialization will fail if the ``_CPC`` entry in the ACPI +SBIOS does not exist in the detected processor. It uses ``acpi_cpc_valid`` +to check the existence of ``_CPC``. All Zen based processors support the legacy +ACPI hardware P-States function, so when ``amd-pstate`` fails initialization, +the kernel will fall back to initialize the ``acpi-cpufreq`` driver. + +There are two types of hardware implementations for ``amd-pstate``: one is +`Full MSR Support <perf_cap_>`_ and another is `Shared Memory Support +<perf_cap_>`_. It can use the :c:macro:`X86_FEATURE_CPPC` feature flag to +indicate the different types. (For details, refer to the Processor Programming +Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors [3]_.) +``amd-pstate`` is to register different ``static_call`` instances for different +hardware implementations. + +Currently, some of the Zen2 and Zen3 processors support ``amd-pstate``. In the +future, it will be supported on more and more AMD processors. + +Full MSR Support +----------------- + +Some new Zen3 processors such as Cezanne provide the MSR registers directly +while the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is set. +``amd-pstate`` can handle the MSR register to implement the fast switch +function in ``CPUFreq`` that can reduce the latency of frequency control in +interrupt context. The functions with a ``pstate_xxx`` prefix represent the +operations on MSR registers. + +Shared Memory Support +---------------------- + +If the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is not set, the +processor supports the shared memory solution. In this case, ``amd-pstate`` +uses the ``cppc_acpi`` helper methods to implement the callback functions +that are defined on ``static_call``. The functions with the ``cppc_xxx`` prefix +represent the operations of ACPI CPPC helpers for the shared memory solution. + + +AMD P-States and ACPI hardware P-States always can be supported in one +processor. But AMD P-States has the higher priority and if it is enabled +with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond +to the request from AMD P-States. + + +User Space Interface in ``sysfs`` - Per-policy control +====================================================== + +``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to +control its functionality at the system level. They are located in the +``/sys/devices/system/cpu/cpufreq/policyX/`` directory and affect all CPUs. :: + + root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd* + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq + /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq + + +``amd_pstate_highest_perf / amd_pstate_max_freq`` + +Maximum CPPC performance and CPU frequency that the driver is allowed to +set, in percent of the maximum supported CPPC performance level (the highest +performance supported in `AMD CPPC Performance Capability <perf_cap_>`_). +In some ASICs, the highest CPPC performance is not the one in the ``_CPC`` +table, so we need to expose it to sysfs. If boost is not active, but +still supported, this maximum frequency will be larger than the one in +``cpuinfo``. +This attribute is read-only. + +``amd_pstate_lowest_nonlinear_freq`` + +The lowest non-linear CPPC CPU frequency that the driver is allowed to set, +in percent of the maximum supported CPPC performance level. (Please see the +lowest non-linear performance in `AMD CPPC Performance Capability +<perf_cap_>`_.) +This attribute is read-only. + +``energy_performance_available_preferences`` + +A list of all the supported EPP preferences that could be used for +``energy_performance_preference`` on this system. +These profiles represent different hints that are provided +to the low-level firmware about the user's desired energy vs efficiency +tradeoff. ``default`` represents the epp value is set by platform +firmware. This attribute is read-only. + +``energy_performance_preference`` + +The current energy performance preference can be read from this attribute. +and user can change current preference according to energy or performance needs +Please get all support profiles list from +``energy_performance_available_preferences`` attribute, all the profiles are +integer values defined between 0 to 255 when EPP feature is enabled by platform +firmware, if EPP feature is disabled, driver will ignore the written value +This attribute is read-write. + +Other performance and frequency values can be read back from +``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`. + + +``amd-pstate`` vs ``acpi-cpufreq`` +====================================== + +On the majority of AMD platforms supported by ``acpi-cpufreq``, the ACPI tables +provided by the platform firmware are used for CPU performance scaling, but +only provide 3 P-states on AMD processors. +However, on modern AMD APU and CPU series, hardware provides the Collaborative +Processor Performance Control according to the ACPI protocol and customizes this +for AMD platforms. That is, fine-grained and continuous frequency ranges +instead of the legacy hardware P-states. ``amd-pstate`` is the kernel +module which supports the new AMD P-States mechanism on most of the future AMD +platforms. The AMD P-States mechanism is the more performance and energy +efficiency frequency management method on AMD processors. + + +AMD Pstate Driver Operation Modes +================================= + +``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode, +non-autonomous (passive) mode and guided autonomous (guided) mode. +Active/passive/guided mode can be chosen by different kernel parameters. + +- In autonomous mode, platform ignores the desired performance level request + and takes into account only the values set to the minimum, maximum and energy + performance preference registers. +- In non-autonomous mode, platform gets desired performance level + from OS directly through Desired Performance Register. +- In guided-autonomous mode, platform sets operating performance level + autonomously according to the current workload and within the limits set by + OS through min and max performance registers. + +Active Mode +------------ + +``amd_pstate=active`` + +This is the low-level firmware control mode which is implemented by ``amd_pstate_epp`` +driver with ``amd_pstate=active`` passed to the kernel in the command line. +In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software +wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware. +then CPPC power algorithm will calculate the runtime workload and adjust the realtime +cores frequency according to the power supply and thermal, core voltage and some other +hardware conditions. + +Passive Mode +------------ + +``amd_pstate=passive`` + +It will be enabled if the ``amd_pstate=passive`` is passed to the kernel in the command line. +In this mode, ``amd_pstate`` driver software specifies a desired QoS target in the CPPC +performance scale as a relative number. This can be expressed as percentage of nominal +performance (infrastructure max). Below the nominal sustained performance level, +desired performance expresses the average performance level of the processor subject +to the Performance Reduction Tolerance register. Above the nominal performance level, +processor must provide at least nominal performance requested and go higher if current +operating conditions allow. + +Guided Mode +----------- + +``amd_pstate=guided`` + +If ``amd_pstate=guided`` is passed to kernel command line option then this mode +is activated. In this mode, driver requests minimum and maximum performance +level and the platform autonomously selects a performance level in this range +and appropriate to the current workload. + +User Space Interface in ``sysfs`` - General +=========================================== + +Global Attributes +----------------- + +``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to +control its functionality at the system level. They are located in the +``/sys/devices/system/cpu/amd_pstate/`` directory and affect all CPUs. + +``status`` + Operation mode of the driver: "active", "passive" or "disable". + + "active" + The driver is functional and in the ``active mode`` + + "passive" + The driver is functional and in the ``passive mode`` + + "guided" + The driver is functional and in the ``guided mode`` + + "disable" + The driver is unregistered and not functional now. + + This attribute can be written to in order to change the driver's + operation mode or to unregister it. The string written to it must be + one of the possible values of it and, if successful, writing one of + these values to the sysfs file will cause the driver to switch over + to the operation mode represented by that string - or to be + unregistered in the "disable" case. + +``cpupower`` tool support for ``amd-pstate`` +=============================================== + +``amd-pstate`` is supported by the ``cpupower`` tool, which can be used to dump +frequency information. Development is in progress to support more and more +operations for the new ``amd-pstate`` module with this tool. :: + + root@hr-test1:/home/ray# cpupower frequency-info + analyzing CPU 0: + driver: amd-pstate + CPUs which run at the same hardware frequency: 0 + CPUs which need to have their frequency coordinated by software: 0 + maximum transition latency: 131 us + hardware limits: 400 MHz - 4.68 GHz + available cpufreq governors: ondemand conservative powersave userspace performance schedutil + current policy: frequency should be within 400 MHz and 4.68 GHz. + The governor "schedutil" may decide which speed to use + within this range. + current CPU frequency: Unable to call hardware + current CPU frequency: 4.02 GHz (asserted by call to kernel) + boost state support: + Supported: yes + Active: yes + AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz. + AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz. + AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz. + AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz. + + +Diagnostics and Tuning +======================= + +Trace Events +-------------- + +There are two static trace events that can be used for ``amd-pstate`` +diagnostics. One of them is the ``cpu_frequency`` trace event generally used +by ``CPUFreq``, and the other one is the ``amd_pstate_perf`` trace event +specific to ``amd-pstate``. The following sequence of shell commands can +be used to enable them and see their output (if the kernel is +configured to support event tracing). :: + + root@hr-test1:/home/ray# cd /sys/kernel/tracing/ + root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable + root@hr-test1:/sys/kernel/tracing# cat trace + # tracer: nop + # + # entries-in-buffer/entries-written: 47827/42233061 #P:2 + # + # _-----=> irqs-off + # / _----=> need-resched + # | / _---=> hardirq/softirq + # || / _--=> preempt-depth + # ||| / delay + # TASK-PID CPU# |||| TIMESTAMP FUNCTION + # | | | |||| | | + <idle>-0 [015] dN... 4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true + <idle>-0 [007] d.h.. 4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true + cat-2161 [000] d.... 4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true + sshd-2125 [004] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true + <idle>-0 [007] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true + <idle>-0 [003] d.s.. 4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true + <idle>-0 [011] d.s.. 4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true + +The ``cpu_frequency`` trace event will be triggered either by the ``schedutil`` scaling +governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the +policies with other scaling governors). + + +Tracer Tool +------------- + +``amd_pstate_tracer.py`` can record and parse ``amd-pstate`` trace log, then +generate performance plots. This utility can be used to debug and tune the +performance of ``amd-pstate`` driver. The tracer tool needs to import intel +pstate tracer. + +Tracer tool located in ``linux/tools/power/x86/amd_pstate_tracer``. It can be +used in two ways. If trace file is available, then directly parse the file +with command :: + + ./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name> + +Or generate trace file with root privilege, then parse and plot with command :: + + sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes] + +The test result can be found in ``results/test_name``. Following is the example +about part of the output. :: + + common_cpu common_secs common_usecs min_perf des_perf max_perf freq mperf apef tsc load duration_ms sample_num elapsed_time common_comm + CPU_005 712 116384 39 49 166 0.7565 9645075 2214891 38431470 25.1 11.646 469 2.496 kworker/5:0-40 + CPU_006 712 116408 39 49 166 0.6769 8950227 1839034 37192089 24.06 11.272 470 2.496 kworker/6:0-1264 + +Unit Tests for amd-pstate +------------------------- + +``amd-pstate-ut`` is a test module for testing the ``amd-pstate`` driver. + + * It can help all users to verify their processor support (SBIOS/Firmware or Hardware). + + * Kernel can have a basic function test to avoid the kernel regression during the update. + + * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization. + +1. Test case descriptions + + 1). Basic tests + + Test prerequisite and basic functions for the ``amd-pstate`` driver. + + +---------+--------------------------------+------------------------------------------------------------------------------------+ + | Index | Functions | Description | + +=========+================================+====================================================================================+ + | 1 | amd_pstate_ut_acpi_cpc_valid || Check whether the _CPC object is present in SBIOS. | + | | || | + | | || The detail refer to `Processor Support <processor_support_>`_. | + +---------+--------------------------------+------------------------------------------------------------------------------------+ + | 2 | amd_pstate_ut_check_enabled || Check whether AMD P-State is enabled. | + | | || | + | | || AMD P-States and ACPI hardware P-States always can be supported in one processor. | + | | | But AMD P-States has the higher priority and if it is enabled with | + | | | :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond to the | + | | | request from AMD P-States. | + +---------+--------------------------------+------------------------------------------------------------------------------------+ + | 3 | amd_pstate_ut_check_perf || Check if the each performance values are reasonable. | + | | || highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0. | + +---------+--------------------------------+------------------------------------------------------------------------------------+ + | 4 | amd_pstate_ut_check_freq || Check if the each frequency values and max freq when set support boost mode | + | | | are reasonable. | + | | || max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0 | + | | || If boost is not active but supported, this maximum frequency will be larger than | + | | | the one in ``cpuinfo``. | + +---------+--------------------------------+------------------------------------------------------------------------------------+ + + 2). Tbench test + + Test and monitor the cpu changes when running tbench benchmark under the specified governor. + These changes include desire performance, frequency, load, performance, energy etc. + The specified governor is ondemand or schedutil. + Tbench can also be tested on the ``acpi-cpufreq`` kernel driver for comparison. + + 3). Gitsource test + + Test and monitor the cpu changes when running gitsource benchmark under the specified governor. + These changes include desire performance, frequency, load, time, energy etc. + The specified governor is ondemand or schedutil. + Gitsource can also be tested on the ``acpi-cpufreq`` kernel driver for comparison. + +#. How to execute the tests + + We use test module in the kselftest frameworks to implement it. + We create ``amd-pstate-ut`` module and tie it into kselftest.(for + details refer to Linux Kernel Selftests [4]_). + + 1). Build + + + open the :c:macro:`CONFIG_X86_AMD_PSTATE` configuration option. + + set the :c:macro:`CONFIG_X86_AMD_PSTATE_UT` configuration option to M. + + make project + + make selftest :: + + $ cd linux + $ make -C tools/testing/selftests + + + make perf :: + + $ cd tools/perf/ + $ make + + + 2). Installation & Steps :: + + $ make -C tools/testing/selftests install INSTALL_PATH=~/kselftest + $ cp tools/perf/perf /usr/bin/perf + $ sudo ./kselftest/run_kselftest.sh -c amd-pstate + + 3). Specified test case :: + + $ cd ~/kselftest/amd-pstate + $ sudo ./run.sh -t basic + $ sudo ./run.sh -t tbench + $ sudo ./run.sh -t tbench -m acpi-cpufreq + $ sudo ./run.sh -t gitsource + $ sudo ./run.sh -t gitsource -m acpi-cpufreq + $ ./run.sh --help + ./run.sh: illegal option -- - + Usage: ./run.sh [OPTION...] + [-h <help>] + [-o <output-file-for-dump>] + [-c <all: All testing, + basic: Basic testing, + tbench: Tbench testing, + gitsource: Gitsource testing.>] + [-t <tbench time limit>] + [-p <tbench process number>] + [-l <loop times for tbench>] + [-i <amd tracer interval>] + [-m <comparative test: acpi-cpufreq>] + + + 4). Results + + + basic + + When you finish test, you will get the following log info :: + + $ dmesg | grep "amd_pstate_ut" | tee log.txt + [12977.570663] amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! + [12977.570673] amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! + [12977.571207] amd_pstate_ut: 3 amd_pstate_ut_check_perf success! + [12977.571212] amd_pstate_ut: 4 amd_pstate_ut_check_freq success! + + + tbench + + When you finish test, you will get selftest.tbench.csv and png images. + The selftest.tbench.csv file contains the raw data and the drop of the comparative test. + The png images shows the performance, energy and performan per watt of each test. + Open selftest.tbench.csv : + + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + Governor | Round | Des-perf | Freq | Load | Performance | Energy | Performance Per Watt | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + Unit | | | GHz | | MB/s | J | MB/J | + +=================================================+==============+==========+=========+==========+=============+=========+======================+ + + amd-pstate-ondemand | 1 | | | | 2504.05 | 1563.67 | 158.5378 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | 2 | | | | 2243.64 | 1430.32 | 155.2941 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | 3 | | | | 2183.88 | 1401.32 | 154.2860 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | Average | | | | 2310.52 | 1465.1 | 156.1268 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 1 | 165.329 | 1.62257 | 99.798 | 2136.54 | 1395.26 | 151.5971 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 2 | 166 | 1.49761 | 99.9993 | 2100.56 | 1380.5 | 150.6377 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 3 | 166 | 1.47806 | 99.9993 | 2084.12 | 1375.76 | 149.9737 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | Average | 165.776 | 1.53275 | 99.9322 | 2107.07 | 1383.84 | 150.7399 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 1 | | | | 2529.9 | 1564.4 | 160.0997 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 2 | | | | 2249.76 | 1432.97 | 155.4297 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 3 | | | | 2181.46 | 1406.88 | 153.5060 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | Average | | | | 2320.37 | 1468.08 | 156.4741 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 1 | | | | 2137.64 | 1385.24 | 152.7723 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 2 | | | | 2107.05 | 1372.23 | 152.0138 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 3 | | | | 2085.86 | 1365.35 | 151.2433 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | Average | | | | 2110.18 | 1374.27 | 152.0136 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) | | | | -9.0584 | -6.3899 | -2.8506 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand VS amd-pstate-schedutil | Comprison(%) | | | | 8.8053 | -5.5463 | -3.4503 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand VS amd-pstate-ondemand | Comprison(%) | | | | -0.4245 | -0.2029 | -0.2219 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil VS amd-pstate-schedutil | Comprison(%) | | | | -0.1473 | 0.6963 | -0.8378 | + +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ + + + gitsource + + When you finish test, you will get selftest.gitsource.csv and png images. + The selftest.gitsource.csv file contains the raw data and the drop of the comparative test. + The png images shows the performance, energy and performan per watt of each test. + Open selftest.gitsource.csv : + + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + Governor | Round | Des-perf | Freq | Load | Time | Energy | Performance Per Watt | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + Unit | | | GHz | | s | J | 1/J | + +=================================================+==============+==========+==========+==========+=============+=========+======================+ + + amd-pstate-ondemand | 1 | 50.119 | 2.10509 | 23.3076 | 475.69 | 865.78 | 0.001155027 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | 2 | 94.8006 | 1.98771 | 56.6533 | 467.1 | 839.67 | 0.001190944 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | 3 | 76.6091 | 2.53251 | 43.7791 | 467.69 | 855.85 | 0.001168429 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand | Average | 73.8429 | 2.20844 | 41.2467 | 470.16 | 853.767 | 0.001171279 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 1 | 165.919 | 1.62319 | 98.3868 | 464.17 | 866.8 | 0.001153668 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 2 | 165.97 | 1.31309 | 99.5712 | 480.15 | 880.4 | 0.001135847 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | 3 | 165.973 | 1.28448 | 99.9252 | 481.79 | 867.02 | 0.001153375 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-schedutil | Average | 165.954 | 1.40692 | 99.2944 | 475.37 | 871.407 | 0.001147569 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 1 | | | | 2379.62 | 742.96 | 0.001345967 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 2 | | | | 441.74 | 817.49 | 0.001223256 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | 3 | | | | 455.48 | 820.01 | 0.001219497 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand | Average | | | | 425.613 | 793.487 | 0.001260260 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 1 | | | | 459.69 | 838.54 | 0.001192548 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 2 | | | | 466.55 | 830.89 | 0.001203528 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | 3 | | | | 470.38 | 837.32 | 0.001194286 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil | Average | | | | 465.54 | 835.583 | 0.001196769 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) | | | | 9.3810 | 5.3051 | -5.0379 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + amd-pstate-ondemand VS amd-pstate-schedutil | Comprison(%) | 124.7392 | -36.2934 | 140.7329 | 1.1081 | 2.0661 | -2.0242 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-ondemand VS amd-pstate-ondemand | Comprison(%) | | | | 10.4665 | 7.5968 | -7.0605 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + + acpi-cpufreq-schedutil VS amd-pstate-schedutil | Comprison(%) | | | | 2.1115 | 4.2873 | -4.1110 | + +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ + +Reference +=========== + +.. [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming, + https://www.amd.com/system/files/TechDocs/24593.pdf + +.. [2] Advanced Configuration and Power Interface Specification, + https://uefi.org/sites/default/files/resources/ACPI_Spec_6_4_Jan22.pdf + +.. [3] Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors + https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip + +.. [4] Linux Kernel Selftests, + https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 0c74a7784964..6adb7988e0eb 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -1,7 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: <isonum.txt> -.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>` .. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>` ======================= @@ -92,16 +91,16 @@ control the P-state of multiple CPUs at the same time and writing to it affects all of those CPUs simultaneously. Sets of CPUs sharing hardware P-state control interfaces are represented by -``CPUFreq`` as |struct cpufreq_policy| objects. For consistency, -|struct cpufreq_policy| is also used when there is only one CPU in the given +``CPUFreq`` as struct cpufreq_policy objects. For consistency, +struct cpufreq_policy is also used when there is only one CPU in the given set. -The ``CPUFreq`` core maintains a pointer to a |struct cpufreq_policy| object for +The ``CPUFreq`` core maintains a pointer to a struct cpufreq_policy object for every CPU in the system, including CPUs that are currently offline. If multiple CPUs share the same hardware P-state control interface, all of the pointers -corresponding to them point to the same |struct cpufreq_policy| object. +corresponding to them point to the same struct cpufreq_policy object. -``CPUFreq`` uses |struct cpufreq_policy| as its basic data type and the design +``CPUFreq`` uses struct cpufreq_policy as its basic data type and the design of its user space interface is based on the policy concept. @@ -147,9 +146,9 @@ CPUs in it. The next major initialization step for a new policy object is to attach a scaling governor to it (to begin with, that is the default scaling governor -determined by the kernel configuration, but it may be changed later -via ``sysfs``). First, a pointer to the new policy object is passed to the -governor's ``->init()`` callback which is expected to initialize all of the +determined by the kernel command line or configuration, but it may be changed +later via ``sysfs``). First, a pointer to the new policy object is passed to +the governor's ``->init()`` callback which is expected to initialize all of the data structures necessary to handle the given policy and, possibly, to add a governor ``sysfs`` interface to it. Next, the governor is started by invoking its ``->start()`` callback. diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index 5605cc6f9560..19754beb5a4e 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -159,17 +159,15 @@ governor uses that information depends on what algorithm is implemented by it and that is the primary reason for having more than one governor in the ``CPUIdle`` subsystem. -There are three ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_ -and ``ladder``. Which of them is used by default depends on the configuration -of the kernel and in particular on whether or not the scheduler tick can be -`stopped by the idle loop <idle-cpus-and-tick_>`_. It is possible to change the -governor at run time if the ``cpuidle_sysfs_switch`` command line parameter has -been passed to the kernel, but that is not safe in general, so it should not be -done on production systems (that may change in the future, though). The name of -the ``CPUIdle`` governor currently used by the kernel can be read from the -:file:`current_governor_ro` (or :file:`current_governor` if -``cpuidle_sysfs_switch`` is present in the kernel command line) file under -:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. +There are four ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_, +``ladder`` and ``haltpoll``. Which of them is used by default depends on the +configuration of the kernel and in particular on whether or not the scheduler +tick can be `stopped by the idle loop <idle-cpus-and-tick_>`_. Available +governors can be read from the :file:`available_governors`, and the governor +can be changed at runtime. The name of the ``CPUIdle`` governor currently +used by the kernel can be read from the :file:`current_governor_ro` or +:file:`current_governor` file under :file:`/sys/devices/system/cpu/cpuidle/` +in ``sysfs``. Which ``CPUIdle`` driver is used, on the other hand, usually depends on the platform the kernel is running on, but there are platforms with more than one @@ -349,81 +347,8 @@ for tickless systems. It follows the same basic strategy as the ``menu`` `one <menu-gov_>`_: it always tries to find the deepest idle state suitable for the given conditions. However, it applies a different approach to that problem. -First, it does not use sleep length correction factors, but instead it attempts -to correlate the observed idle duration values with the available idle states -and use that information to pick up the idle state that is most likely to -"match" the upcoming CPU idle interval. Second, it does not take the tasks -that were running on the given CPU in the past and are waiting on some I/O -operations to complete now at all (there is no guarantee that they will run on -the same CPU when they become runnable again) and the pattern detection code in -it avoids taking timer wakeups into account. It also only uses idle duration -values less than the current time till the closest timer (with the scheduler -tick excluded) for that purpose. - -Like in the ``menu`` governor `case <menu-gov_>`_, the first step is to obtain -the *sleep length*, which is the time until the closest timer event with the -assumption that the scheduler tick will be stopped (that also is the upper bound -on the time until the next CPU wakeup). That value is then used to preselect an -idle state on the basis of three metrics maintained for each idle state provided -by the ``CPUIdle`` driver: ``hits``, ``misses`` and ``early_hits``. - -The ``hits`` and ``misses`` metrics measure the likelihood that a given idle -state will "match" the observed (post-wakeup) idle duration if it "matches" the -sleep length. They both are subject to decay (after a CPU wakeup) every time -the target residency of the idle state corresponding to them is less than or -equal to the sleep length and the target residency of the next idle state is -greater than the sleep length (that is, when the idle state corresponding to -them "matches" the sleep length). The ``hits`` metric is increased if the -former condition is satisfied and the target residency of the given idle state -is less than or equal to the observed idle duration and the target residency of -the next idle state is greater than the observed idle duration at the same time -(that is, it is increased when the given idle state "matches" both the sleep -length and the observed idle duration). In turn, the ``misses`` metric is -increased when the given idle state "matches" the sleep length only and the -observed idle duration is too short for its target residency. - -The ``early_hits`` metric measures the likelihood that a given idle state will -"match" the observed (post-wakeup) idle duration if it does not "match" the -sleep length. It is subject to decay on every CPU wakeup and it is increased -when the idle state corresponding to it "matches" the observed (post-wakeup) -idle duration and the target residency of the next idle state is less than or -equal to the sleep length (i.e. the idle state "matching" the sleep length is -deeper than the given one). - -The governor walks the list of idle states provided by the ``CPUIdle`` driver -and finds the last (deepest) one with the target residency less than or equal -to the sleep length. Then, the ``hits`` and ``misses`` metrics of that idle -state are compared with each other and it is preselected if the ``hits`` one is -greater (which means that that idle state is likely to "match" the observed idle -duration after CPU wakeup). If the ``misses`` one is greater, the governor -preselects the shallower idle state with the maximum ``early_hits`` metric -(or if there are multiple shallower idle states with equal ``early_hits`` -metric which also is the maximum, the shallowest of them will be preselected). -[If there is a wakeup latency constraint coming from the `PM QoS framework -<cpu-pm-qos_>`_ which is hit before reaching the deepest idle state with the -target residency within the sleep length, the deepest idle state with the exit -latency within the constraint is preselected without consulting the ``hits``, -``misses`` and ``early_hits`` metrics.] - -Next, the governor takes several idle duration values observed most recently -into consideration and if at least a half of them are greater than or equal to -the target residency of the preselected idle state, that idle state becomes the -final candidate to ask for. Otherwise, the average of the most recent idle -duration values below the target residency of the preselected idle state is -computed and the governor walks the idle states shallower than the preselected -one and finds the deepest of them with the target residency within that average. -That idle state is then taken as the final candidate to ask for. - -Still, at this point the governor may need to refine the idle state selection if -it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That -generally happens if the target residency of the idle state selected so far is -less than the tick period and the tick has not been stopped already (in a -previous iteration of the idle loop). Then, like in the ``menu`` governor -`case <menu-gov_>`_, the sleep length used in the previous computations may not -reflect the real time until the closest timer event and if it really is greater -than that time, a shallower state with a suitable target residency may need to -be selected. - +.. kernel-doc:: drivers/cpuidle/governors/teo.c + :doc: teo-description .. _idle-states-representation: @@ -480,7 +405,7 @@ order to ask the hardware to enter that state. Also, for each statistics of the given idle state. That information is exposed by the kernel via ``sysfs``. -For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/` +For each CPU in the system, there is a :file:`/sys/devices/system/cpu/cpu<N>/cpuidle/` directory in ``sysfs``, where the number ``<N>`` is assigned to the given CPU at the initialization time. That directory contains a set of subdirectories called :file:`state0`, :file:`state1` and so on, up to the number of idle state @@ -496,7 +421,7 @@ object corresponding to it, as follows: residency. ``below`` - Total number of times this idle state had been asked for, but cerainly + Total number of times this idle state had been asked for, but certainly a deeper idle state would have been a better match for the observed idle duration. @@ -530,6 +455,10 @@ object corresponding to it, as follows: Total number of times the hardware has been asked by the given CPU to enter this idle state. +``rejected`` + Total number of times a request to enter this idle state on the given + CPU was rejected. + The :file:`desc` and :file:`name` files both contain strings. The difference between them is that the name is expected to be more concise, while the description may be longer and it may contain white space or special characters. @@ -574,6 +503,11 @@ particular case. For these reasons, the only reliable way to find out how much time has been spent by the hardware in different idle states supported by it is to use idle state residency counters in the hardware, if available. +Generally, an interrupt received when trying to enter an idle state causes the +idle state entry request to be rejected, in which case the ``CPUIdle`` driver +may return an error code to indicate that this was the case. The :file:`usage` +and :file:`rejected` files report the number of times the given idle state +was entered successfully or rejected, respectively. .. _cpu-pm-qos: @@ -678,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor by default this way, for example. The other kernel command line parameters controlling CPU idle time management -described below are only relevant for the *x86* architecture and some of -them affect Intel processors only. +described below are only relevant for the *x86* architecture and references +to ``intel_idle`` affect Intel processors only. The *x86* architecture support code recognizes three kernel command line options related to CPU idle time management: ``idle=poll``, ``idle=halt``, @@ -692,7 +626,7 @@ which of the two parameters is added to the kernel command line. In the instruction of the CPUs (which, as a rule, suspends the execution of the program and causes the hardware to attempt to enter the shallowest available idle state) for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a -more or less ``lightweight'' sequence of instructions in a tight loop. [Note +more or less "lightweight" sequence of instructions in a tight loop. [Note that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle CPUs from saving almost any energy at all may not be the only effect of it. For example, on Intel hardware it effectively prevents CPUs from using @@ -701,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as energy-efficiency. Thus using it for performance reasons may not be a good idea at all.] -The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes -``acpi_idle`` to be used (as long as all of the information needed by it is -there in the system's ACPI tables), but it is not allowed to use the -``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. +The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of +the CPU to enter idle states. When this option is used, the ``acpi_idle`` +driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems +running Intel processors, this option disables the ``intel_idle`` driver +and forces the use of the ``acpi_idle`` driver instead. Note that in either +case, ``acpi_idle`` driver will function only if all the information needed +by it is in the system's ACPI tables. In addition to the architecture-level kernel command line options affecting CPU idle time management, there are parameters affecting individual ``CPUIdle`` diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst new file mode 100644 index 000000000000..a2bfb971654f --- /dev/null +++ b/Documentation/admin-guide/pm/intel-speed-select.rst @@ -0,0 +1,939 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================ +Intel(R) Speed Select Technology User Guide +============================================================ + +The Intel(R) Speed Select Technology (Intel(R) SST) provides a powerful new +collection of features that give more granular control over CPU performance. +With Intel(R) SST, one server can be configured for power and performance for a +variety of diverse workload requirements. + +Refer to the links below for an overview of the technology: + +- https://www.intel.com/content/www/us/en/architecture-and-technology/speed-select-technology-article.html +- https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enhancing-performance.pdf + +These capabilities are further enhanced in some of the newer generations of +server platforms where these features can be enumerated and controlled +dynamically without pre-configuring via BIOS setup options. This dynamic +configuration is done via mailbox commands to the hardware. One way to enumerate +and configure these features is by using the Intel Speed Select utility. + +This document explains how to use the Intel Speed Select tool to enumerate and +control Intel(R) SST features. This document gives example commands and explains +how these commands change the power and performance profile of the system under +test. Using this tool as an example, customers can replicate the messaging +implemented in the tool in their production software. + +intel-speed-select configuration tool +====================================== + +Most Linux distribution packages may include the "intel-speed-select" tool. If not, +it can be built by downloading the Linux kernel tree from kernel.org. Once +downloaded, the tool can be built without building the full kernel. + +From the kernel tree, run the following commands:: + +# cd tools/power/x86/intel-speed-select/ +# make +# make install + +Getting Help +------------ + +To get help with the tool, execute the command below:: + +# intel-speed-select --help + +The top-level help describes arguments and features. Notice that there is a +multi-level help structure in the tool. For example, to get help for the feature "perf-profile":: + +# intel-speed-select perf-profile --help + +To get help on a command, another level of help is provided. For example for the command info "info":: + +# intel-speed-select perf-profile info --help + +Summary of platform capability +------------------------------ +To check the current platform and driver capabilities, execute:: + +#intel-speed-select --info + +For example on a test system:: + + # intel-speed-select --info + Intel(R) Speed Select Technology + Executing on CPU model: X + Platform: API version : 1 + Platform: Driver version : 1 + Platform: mbox supported : 1 + Platform: mmio supported : 1 + Intel(R) SST-PP (feature perf-profile) is supported + TDP level change control is unlocked, max level: 4 + Intel(R) SST-TF (feature turbo-freq) is supported + Intel(R) SST-BF (feature base-freq) is not supported + Intel(R) SST-CP (feature core-power) is supported + +Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP) +------------------------------------------------------------------------ + +This feature allows configuration of a server dynamically based on workload +performance requirements. This helps users during deployment as they do not have +to choose a specific server configuration statically. This Intel(R) Speed Select +Technology - Performance Profile (Intel(R) SST-PP) feature introduces a mechanism +that allows multiple optimized performance profiles per system. Each profile +defines a set of CPUs that need to be online and rest offline to sustain a +guaranteed base frequency. Once the user issues a command to use a specific +performance profile and meet CPU online/offline requirement, the user can expect +a change in the base frequency dynamically. This feature is called +"perf-profile" when using the Intel Speed Select tool. + +Number or performance levels +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +There can be multiple performance profiles on a system. To get the number of +profiles, execute the command below:: + + # intel-speed-select perf-profile get-config-levels + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + get-config-levels:4 + package-1 + die-0 + cpu-14 + get-config-levels:4 + +On this system under test, there are 4 performance profiles in addition to the +base performance profile (which is performance level 0). + +Lock/Unlock status +~~~~~~~~~~~~~~~~~~ + +Even if there are multiple performance profiles, it is possible that they +are locked. If they are locked, users cannot issue a command to change the +performance state. It is possible that there is a BIOS setup to unlock or check +with your system vendor. + +To check if the system is locked, execute the following command:: + + # intel-speed-select perf-profile get-lock-status + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + get-lock-status:0 + package-1 + die-0 + cpu-14 + get-lock-status:0 + +In this case, lock status is 0, which means that the system is unlocked. + +Properties of a performance level +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To get properties of a specific performance level (For example for the level 0, below), execute the command below:: + + # intel-speed-select perf-profile info -l 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + perf-profile-level-0 + cpu-count:28 + enable-cpu-mask:000003ff,f0003fff + enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41 + thermal-design-power-ratio:26 + base-frequency(MHz):2600 + speed-select-turbo-freq:disabled + speed-select-base-freq:disabled + ... + ... + +Here -l option is used to specify a performance level. + +If the option -l is omitted, then this command will print information about all +the performance levels. The above command is printing properties of the +performance level 0. + +For this performance profile, the list of CPUs displayed by the +"enable-cpu-mask/enable-cpu-list" at the max can be "online." When that +condition is met, then base frequency of 2600 MHz can be maintained. To +understand more, execute "intel-speed-select perf-profile info" for performance +level 4:: + + # intel-speed-select perf-profile info -l 4 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + perf-profile-level-4 + cpu-count:28 + enable-cpu-mask:000000fa,f0000faf + enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39 + thermal-design-power-ratio:28 + base-frequency(MHz):2800 + speed-select-turbo-freq:disabled + speed-select-base-freq:unsupported + ... + ... + +There are fewer CPUs in the "enable-cpu-mask/enable-cpu-list". Consequently, if +the user only keeps these CPUs online and the rest "offline," then the base +frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0. + +Get current performance level +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To get the current performance level, execute:: + + # intel-speed-select perf-profile get-config-current-level + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + get-config-current_level:0 + +First verify that the base_frequency displayed by the cpufreq sysfs is correct:: + + # cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency + 2600000 + +This matches the base-frequency (MHz) field value displayed from the +"perf-profile info" command for performance level 0(cpufreq frequency is in +KHz). + +To check if the average frequency is equal to the base frequency for a 100% busy +workload, disable turbo:: + +# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo + +Then runs a busy workload on all CPUs, for example:: + +#stress -c 64 + +To verify the base frequency, run turbostat:: + + #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1 + + Package Core CPU Bzy_MHz + - - 2600 + 0 0 0 2600 + 0 1 1 2600 + 0 2 2 2600 + 0 3 3 2600 + 0 4 4 2600 + . . . . + + +Changing performance level +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To the change the performance level to 4, execute:: + + # intel-speed-select -d perf-profile set-config-level -l 4 -o + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + perf-profile + set_tdp_level:success + +In the command above, "-o" is optional. If it is specified, then it will also +offline CPUs which are not present in the enable_cpu_mask for this performance +level. + +Now if the base_frequency is checked:: + + #cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency + 2800000 + +Which shows that the base frequency now increased from 2600 MHz at performance +level 0 to 2800 MHz at performance level 4. As a result, any workload, which can +use fewer CPUs, can see a boost of 200 MHz compared to performance level 0. + +Changing performance level via BMC Interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It is possible to change SST-PP level using out of band (OOB) agent (Via some +remote management console, through BMC "Baseboard Management Controller" +interface). This mode is supported from the Sapphire Rapids processor +generation. The kernel and tool change to support this mode is added to Linux +kernel version 5.18. To enable this feature, kernel config +"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the tool +is "v1.12" to support this feature, which is part of Linux kernel version 5.18. + +To support such configuration, this tool can be used as a daemon. Add +a command line option --oob:: + + # intel-speed-select --oob + Intel(R) Speed Select Technology + Executing on CPU model:143[0x8f] + OOB mode is enabled and will run as daemon + +In this mode the tool will online/offline CPUs based on the new performance +level. + +Check presence of other Intel(R) SST features +--------------------------------------------- + +Each of the performance profiles also specifies weather there is support of +other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency +(Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel +SST-TF)). + +For example, from the output of "perf-profile info" above, for level 0 and level +4: + +For level 0:: + speed-select-turbo-freq:disabled + speed-select-base-freq:disabled + +For level 4:: + speed-select-turbo-freq:disabled + speed-select-base-freq:unsupported + +Given these results, the "speed-select-base-freq" (Intel(R) SST-BF) in level 4 +changed from "disabled" to "unsupported" compared to performance level 0. + +This means that at performance level 4, the "speed-select-base-freq" feature is +not supported. However, at performance level 0, this feature is "supported", but +currently "disabled", meaning the user has not activated this feature. Whereas +"speed-select-turbo-freq" (Intel(R) SST-TF) is supported at both performance +levels, but currently not activated by the user. + +The Intel(R) SST-BF and the Intel(R) SST-TF features are built on a foundation +technology called Intel(R) Speed Select Technology - Core Power (Intel(R) SST-CP). +The platform firmware enables this feature when Intel(R) SST-BF or Intel(R) SST-TF +is supported on a platform. + +Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP) +--------------------------------------------------------------- + +Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP) is an interface that +allows users to define per core priority. This defines a mechanism to distribute +power among cores when there is a power constrained scenario. This defines a +class of service (CLOS) configuration. + +The user can configure up to 4 class of service configurations. Each CLOS group +configuration allows definitions of parameters, which affects how the frequency +can be limited and power is distributed. Each CPU core can be tied to a class of +service and hence an associated priority. The granularity is at core level not +at per CPU level. + +Enable CLOS based prioritization +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To use CLOS based prioritization feature, firmware must be informed to enable +and use a priority type. There is a default per platform priority type, which +can be changed with optional command line parameter. + +To enable and check the options, execute:: + + # intel-speed-select core-power enable --help + Intel(R) Speed Select Technology + Executing on CPU model: X + Enable core-power for a package/die + Clos Enable: Specify priority type with [--priority|-p] + 0: Proportional, 1: Ordered + +There are two types of priority types: + +- Ordered + +Priority for ordered throttling is defined based on the index of the assigned +CLOS group. Where CLOS0 gets highest priority (throttled last). + +Priority order is: +CLOS0 > CLOS1 > CLOS2 > CLOS3. + +- Proportional + +When proportional priority is used, there is an additional parameter called +frequency_weight, which can be specified per CLOS group. The goal of +proportional priority is to provide each core with the requested min., then +distribute all remaining (excess/deficit) budgets in proportion to a defined +weight. This proportional priority can be configured using "core-power config" +command. + +To enable with the platform default priority type, execute:: + + # intel-speed-select core-power enable + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + core-power + enable:success + package-1 + die-0 + cpu-6 + core-power + enable:success + +The scope of this enable is per package or die scoped when a package contains +multiple dies. To check if CLOS is enabled and get priority type, "core-power +info" command can be used. For example to check the status of core-power feature +on CPU 0, execute:: + + # intel-speed-select -c 0 core-power info + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + core-power + support-status:supported + enable-status:enabled + clos-enable-status:enabled + priority-type:proportional + package-1 + die-0 + cpu-24 + core-power + support-status:supported + enable-status:enabled + clos-enable-status:enabled + priority-type:proportional + +Configuring CLOS groups +~~~~~~~~~~~~~~~~~~~~~~~ + +Each CLOS group has its own attributes including min, max, freq_weight and +desired. These parameters can be configured with "core-power config" command. +Defaults will be used if user skips setting a parameter except clos id, which is +mandatory. To check core-power config options, execute:: + + # intel-speed-select core-power config --help + Intel(R) Speed Select Technology + Executing on CPU model: X + Set core-power configuration for one of the four clos ids + Specify targeted clos id with [--clos|-c] + Specify clos Proportional Priority [--weight|-w] + Specify clos min in MHz with [--min|-n] + Specify clos max in MHz with [--max|-m] + +For example:: + + # intel-speed-select core-power config -c 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + clos epp is not specified, default: 0 + clos frequency weight is not specified, default: 0 + clos min is not specified, default: 0 MHz + clos max is not specified, default: 25500 MHz + clos desired is not specified, default: 0 + package-0 + die-0 + cpu-0 + core-power + config:success + package-1 + die-0 + cpu-6 + core-power + config:success + +The user has the option to change defaults. For example, the user can change the +"min" and set the base frequency to always get guaranteed base frequency. + +Get the current CLOS configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To check the current configuration, "core-power get-config" can be used. For +example, to get the configuration of CLOS 0:: + + # intel-speed-select core-power get-config -c 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + core-power + clos:0 + epp:0 + clos-proportional-priority:0 + clos-min:0 MHz + clos-max:Max Turbo frequency + clos-desired:0 MHz + package-1 + die-0 + cpu-24 + core-power + clos:0 + epp:0 + clos-proportional-priority:0 + clos-min:0 MHz + clos-max:Max Turbo frequency + clos-desired:0 MHz + +Associating a CPU with a CLOS group +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To associate a CPU to a CLOS group "core-power assoc" command can be used:: + + # intel-speed-select core-power assoc --help + Intel(R) Speed Select Technology + Executing on CPU model: X + Associate a clos id to a CPU + Specify targeted clos id with [--clos|-c] + + +For example to associate CPU 10 to CLOS group 3, execute:: + + # intel-speed-select -c 10 core-power assoc -c 3 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-10 + core-power + assoc:success + +Once a CPU is associated, its sibling CPUs are also associated to a CLOS group. +Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency +limits. + +To check the existing association for a CPU, "core-power get-assoc" command can +be used. For example, to get association of CPU 10, execute:: + + # intel-speed-select -c 10 core-power get-assoc + Intel(R) Speed Select Technology + Executing on CPU model: X + package-1 + die-0 + cpu-10 + get-assoc + clos:3 + +This shows that CPU 10 is part of a CLOS group 3. + + +Disable CLOS based prioritization +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To disable, execute:: + +# intel-speed-select core-power disable + +Some features like Intel(R) SST-TF can only be enabled when CLOS based prioritization +is enabled. For this reason, disabling while Intel(R) SST-TF is enabled can cause +Intel(R) SST-TF to fail. This will cause the "disable" command to display an error +if Intel(R) SST-TF is already enabled. In turn, to disable, the Intel(R) SST-TF +feature must be disabled first. + +Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) +------------------------------------------------------------------- + +The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets +the user control base frequency. If some critical workload threads demand +constant high guaranteed performance, then this feature can be used to execute +the thread at higher base frequency on specific sets of CPUs (high priority +CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs. +This feature does not require offline of the low priority CPUs. + +The support of Intel(R) SST-BF depends on the Intel(R) Speed Select Technology - +Performance Profile (Intel(R) SST-PP) performance level configuration. It is +possible that only certain performance levels support Intel(R) SST-BF. It is also +possible that only base performance level (level = 0) has support of Intel +SST-BF. Consequently, first select the desired performance level to enable this +feature. + +In the system under test here, Intel(R) SST-BF is supported at the base +performance level 0, but currently disabled. For example for the level 0:: + + # intel-speed-select -c 0 perf-profile info -l 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + perf-profile-level-0 + ... + + speed-select-base-freq:disabled + ... + +Before enabling Intel(R) SST-BF and measuring its impact on a workload +performance, execute some workload and measure performance and get a baseline +performance to compare against. + +Here the user wants more guaranteed performance. For this reason, it is likely +that turbo is disabled. To disable turbo, execute:: + +#echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo + +Based on the output of the "intel-speed-select perf-profile info -l 0" base +frequency of guaranteed frequency 2600 MHz. + + +Measure baseline performance for comparison +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To compare, pick a multi-threaded workload where each thread can be scheduled on +separate CPUs. "Hackbench pipe" test is a good example on how to improve +performance using Intel(R) SST-BF. + +Below, the workload is measuring average scheduler wakeup latency, so a lower +number means better performance:: + + # taskset -c 3,4 perf bench -r 100 sched pipe + # Running 'sched/pipe' benchmark: + # Executed 1000000 pipe operations between two processes + Total time: 6.102 [sec] + 6.102445 usecs/op + 163868 ops/sec + +While running the above test, if we take turbostat output, it will show us that +2 of the CPUs are busy and reaching max. frequency (which would be the base +frequency as the turbo is disabled). The turbostat output:: + + #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1 + Package Core CPU Bzy_MHz + 0 0 0 1000 + 0 1 1 1005 + 0 2 2 1000 + 0 3 3 2600 + 0 4 4 2600 + 0 5 5 1000 + 0 6 6 1000 + 0 7 7 1005 + 0 8 8 1005 + 0 9 9 1000 + 0 10 10 1000 + 0 11 11 995 + 0 12 12 1000 + 0 13 13 1000 + +From the above turbostat output, both CPU 3 and 4 are very busy and reaching +full guaranteed frequency of 2600 MHz. + +Intel(R) SST-BF Capabilities +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To get capabilities of Intel(R) SST-BF for the current performance level 0, +execute:: + + # intel-speed-select base-freq info -l 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + speed-select-base-freq + high-priority-base-frequency(MHz):3000 + high-priority-cpu-mask:00000216,00002160 + high-priority-cpu-list:5,6,8,13,33,34,36,41 + low-priority-base-frequency(MHz):2400 + tjunction-temperature(C):125 + thermal-design-power(W):205 + +The above capabilities show that there are some CPUs on this system that can +offer base frequency of 3000 MHz compared to the standard base frequency at this +performance levels. Nevertheless, these CPUs are fixed, and they are presented +via high-priority-cpu-list/high-priority-cpu-mask. But if this Intel(R) SST-BF +feature is selected, the low priorities CPUs (which are not in +high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this +clipping of low priority CPUs is acceptable, then the user can enable Intel +SST-BF feature particularly for the above "sched pipe" workload since only two +CPUs are used, they can be scheduled on high priority CPUs and can get boost of +400 MHz. + +Enable Intel(R) SST-BF +~~~~~~~~~~~~~~~~~~~~~~ + +To enable Intel(R) SST-BF feature, execute:: + + # intel-speed-select base-freq enable -a + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + base-freq + enable:success + package-1 + die-0 + cpu-14 + base-freq + enable:success + +In this case, -a option is optional. This not only enables Intel(R) SST-BF, but it +also adjusts the priority of cores using Intel(R) Speed Select Technology Core +Power (Intel(R) SST-CP) features. This option sets the minimum performance of each +Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP) class to +maximum performance so that the hardware will give maximum performance possible +for each CPU. + +If -a option is not used, then the following steps are required before enabling +Intel(R) SST-BF: + +- Discover Intel(R) SST-BF and note low and high priority base frequency +- Note the high priority CPU list +- Enable CLOS using core-power feature set +- Configure CLOS parameters. Use CLOS.min to set to minimum performance +- Subscribe desired CPUs to CLOS groups + +With this configuration, if the same workload is executed by pinning the +workload to high priority CPUs (CPU 5 and 6 in this case):: + + #taskset -c 5,6 perf bench -r 100 sched pipe + # Running 'sched/pipe' benchmark: + # Executed 1000000 pipe operations between two processes + Total time: 5.627 [sec] + 5.627922 usecs/op + 177685 ops/sec + +This way, by enabling Intel(R) SST-BF, the performance of this benchmark is +improved (latency reduced) by 7.79%. From the turbostat output, it can be +observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz. +The turbostat output:: + + #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1 + Package Core CPU Bzy_MHz + 0 0 0 2151 + 0 1 1 2166 + 0 2 2 2175 + 0 3 3 2175 + 0 4 4 2175 + 0 5 5 3000 + 0 6 6 3000 + 0 7 7 2180 + 0 8 8 2662 + 0 9 9 2176 + 0 10 10 2175 + 0 11 11 2176 + 0 12 12 2176 + 0 13 13 2661 + +Disable Intel(R) SST-BF +~~~~~~~~~~~~~~~~~~~~~~~ + +To disable the Intel(R) SST-BF feature, execute:: + +# intel-speed-select base-freq disable -a + + +Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF) +-------------------------------------------------------------------- + +This feature enables the ability to set different "All core turbo ratio limits" +to cores based on the priority. By using this feature, some cores can be +configured to get higher turbo frequency by designating them as high priority at +the cost of lower or no turbo frequency on the low priority cores. + +For this reason, this feature is only useful when system is busy utilizing all +CPUs, but the user wants some configurable option to get high performance on +some CPUs. + +The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF) +depends on the Intel(R) Speed Select Technology - Performance Profile (Intel +SST-PP) performance level configuration. It is possible that only a certain +performance level supports Intel(R) SST-TF. It is also possible that only the base +performance level (level = 0) has the support of Intel(R) SST-TF. Hence, first +select the desired performance level to enable this feature. + +In the system under test here, Intel(R) SST-TF is supported at the base +performance level 0, but currently disabled:: + + # intel-speed-select -c 0 perf-profile info -l 0 + Intel(R) Speed Select Technology + package-0 + die-0 + cpu-0 + perf-profile-level-0 + ... + ... + speed-select-turbo-freq:disabled + ... + ... + + +To check if performance can be improved using Intel(R) SST-TF feature, get the turbo +frequency properties with Intel(R) SST-TF enabled and compare to the base turbo +capability of this system. + +Get Base turbo capability +~~~~~~~~~~~~~~~~~~~~~~~~~ + +To get the base turbo capability of performance level 0, execute:: + + # intel-speed-select perf-profile info -l 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + perf-profile-level-0 + ... + ... + turbo-ratio-limits-sse + bucket-0 + core-count:2 + max-turbo-frequency(MHz):3200 + bucket-1 + core-count:4 + max-turbo-frequency(MHz):3100 + bucket-2 + core-count:6 + max-turbo-frequency(MHz):3100 + bucket-3 + core-count:8 + max-turbo-frequency(MHz):3100 + bucket-4 + core-count:10 + max-turbo-frequency(MHz):3100 + bucket-5 + core-count:12 + max-turbo-frequency(MHz):3100 + bucket-6 + core-count:14 + max-turbo-frequency(MHz):3100 + bucket-7 + core-count:16 + max-turbo-frequency(MHz):3100 + +Based on the data above, when all the CPUS are busy, the max. frequency of 3100 +MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress) +and on CPU 12 and 13, execute "hackbench pipe" workload:: + + # taskset -c 12,13 perf bench -r 100 sched pipe + # Running 'sched/pipe' benchmark: + # Executed 1000000 pipe operations between two processes + Total time: 5.705 [sec] + 5.705488 usecs/op + 175269 ops/sec + +The turbostat output:: + + #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1 + Package Core CPU Bzy_MHz + 0 0 0 3000 + 0 1 1 3000 + 0 2 2 3000 + 0 3 3 3000 + 0 4 4 3000 + 0 5 5 3100 + 0 6 6 3100 + 0 7 7 3000 + 0 8 8 3100 + 0 9 9 3000 + 0 10 10 3000 + 0 11 11 3000 + 0 12 12 3100 + 0 13 13 3100 + +Based on turbostat output, the performance is limited by frequency cap of 3100 +MHz. To check if the hackbench performance can be improved for CPU 12 and CPU +13, first check the capability of the Intel(R) SST-TF feature for this performance +level. + +Get Intel(R) SST-TF Capability +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To get the capability, the "turbo-freq info" command can be used:: + + # intel-speed-select turbo-freq info -l 0 + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-0 + speed-select-turbo-freq + bucket-0 + high-priority-cores-count:2 + high-priority-max-frequency(MHz):3200 + high-priority-max-avx2-frequency(MHz):3200 + high-priority-max-avx512-frequency(MHz):3100 + bucket-1 + high-priority-cores-count:4 + high-priority-max-frequency(MHz):3100 + high-priority-max-avx2-frequency(MHz):3000 + high-priority-max-avx512-frequency(MHz):2900 + bucket-2 + high-priority-cores-count:6 + high-priority-max-frequency(MHz):3100 + high-priority-max-avx2-frequency(MHz):3000 + high-priority-max-avx512-frequency(MHz):2900 + speed-select-turbo-freq-clip-frequencies + low-priority-max-frequency(MHz):2600 + low-priority-max-avx2-frequency(MHz):2400 + low-priority-max-avx512-frequency(MHz):2100 + +Based on the output above, there is an Intel(R) SST-TF bucket for which there are +two high priority cores. If only two high priority cores are set, then max. +turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz +more than the base turbo capability for all cores. + +In turn, for the hackbench workload, two CPUs can be set as high priority and +rest as low priority. One side effect is that once enabled, the low priority +cores will be clipped to a lower frequency of 2600 MHz. + +Enable Intel(R) SST-TF +~~~~~~~~~~~~~~~~~~~~~~ + +To enable Intel(R) SST-TF, execute:: + + # intel-speed-select -c 12,13 turbo-freq enable -a + Intel(R) Speed Select Technology + Executing on CPU model: X + package-0 + die-0 + cpu-12 + turbo-freq + enable:success + package-0 + die-0 + cpu-13 + turbo-freq + enable:success + package--1 + die-0 + cpu-63 + turbo-freq --auto + enable:success + +In this case, the option "-a" is optional. If set, it enables Intel(R) SST-TF +feature and also sets the CPUs to high and low priority using Intel Speed +Select Technology Core Power (Intel(R) SST-CP) features. The CPU numbers passed +with "-c" arguments are marked as high priority, including its siblings. + +If -a option is not used, then the following steps are required before enabling +Intel(R) SST-TF: + +- Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency + +- Enable CLOS using core-power feature set - Configure CLOS parameters + +- Subscribe desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency + +If the same hackbench workload is executed, schedule hackbench threads on high +priority CPUs:: + + #taskset -c 12,13 perf bench -r 100 sched pipe + # Running 'sched/pipe' benchmark: + # Executed 1000000 pipe operations between two processes + Total time: 5.510 [sec] + 5.510165 usecs/op + 180826 ops/sec + +This improved performance by around 3.3% improvement on a busy system. Here the +turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost. +The turbostat output:: + + #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1 + Package Core CPU Bzy_MHz + ... + 0 12 12 3200 + 0 13 13 3200 diff --git a/Documentation/admin-guide/pm/intel_idle.rst b/Documentation/admin-guide/pm/intel_idle.rst index 89309e1b0e48..39bd6ecce7de 100644 --- a/Documentation/admin-guide/pm/intel_idle.rst +++ b/Documentation/admin-guide/pm/intel_idle.rst @@ -20,8 +20,8 @@ Nehalem and later generations of Intel processors, but the level of support for a particular processor model in it depends on whether or not it recognizes that processor model and may also depend on information coming from the platform firmware. [To understand ``intel_idle`` it is necessary to know how ``CPUIdle`` -works in general, so this is the time to get familiar with :doc:`cpuidle` if you -have not done that yet.] +works in general, so this is the time to get familiar with +Documentation/admin-guide/pm/cpuidle.rst if you have not done that yet.] ``intel_idle`` uses the ``MWAIT`` instruction to inform the processor that the logical CPU executing it is idle and so it may be possible to put some of the @@ -53,7 +53,8 @@ processor) corresponding to them depends on the processor model and it may also depend on the configuration of the platform. In order to create a list of available idle states required by the ``CPUIdle`` -subsystem (see :ref:`idle-states-representation` in :doc:`cpuidle`), +subsystem (see :ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst), ``intel_idle`` can use two sources of information: static tables of idle states for different processor models included in the driver itself and the ACPI tables of the system. The former are always used if the processor model at hand is @@ -98,7 +99,8 @@ states may not be enabled by default if there are no matching entries in the preliminary list of idle states coming from the ACPI tables. In that case user space still can enable them later (on a per-CPU basis) with the help of the ``disable`` idle state attribute in ``sysfs`` (see -:ref:`idle-states-representation` in :doc:`cpuidle`). This basically means that +:ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst). This basically means that the idle states "known" to the driver may not be enabled by default if they have not been exposed by the platform firmware (through the ACPI tables). @@ -168,7 +170,7 @@ and ``idle=nomwait``. If any of them is present in the kernel command line, the ``MWAIT`` instruction is not allowed to be used, so the initialization of ``intel_idle`` will fail. -Apart from that there are four module parameters recognized by ``intel_idle`` +Apart from that there are five module parameters recognized by ``intel_idle`` itself that can be set via the kernel command line (they cannot be updated via sysfs, so that is the only way to change their values). @@ -186,7 +188,8 @@ be desirable. In practice, it is only really necessary to do that if the idle states in question cannot be enabled during system startup, because in the working state of the system the CPU power management quality of service (PM QoS) feature can be used to prevent ``CPUIdle`` from touching those idle states -even if they have been enumerated (see :ref:`cpu-pm-qos` in :doc:`cpuidle`). +even if they have been enumerated (see :ref:`cpu-pm-qos` in +Documentation/admin-guide/pm/cpuidle.rst). Setting ``max_cstate`` to 0 causes the ``intel_idle`` initialization to fail. The ``no_acpi`` and ``use_acpi`` module parameters (recognized by ``intel_idle`` @@ -202,7 +205,8 @@ Namely, the positions of the bits that are set in the ``states_off`` value are the indices of idle states to be disabled by default (as reflected by the names of the corresponding idle state directories in ``sysfs``, :file:`state0`, :file:`state1` ... :file:`state<i>` ..., where ``<i>`` is the index of the given -idle state; see :ref:`idle-states-representation` in :doc:`cpuidle`). +idle state; see :ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst). For example, if ``states_off`` is equal to 3, the driver will disable idle states 0 and 1 by default, and if it is equal to 8, idle state 3 will be @@ -212,6 +216,21 @@ are ignored). The idle states disabled this way can be enabled (on a per-CPU basis) from user space via ``sysfs``. +The ``ibrs_off`` module parameter is a boolean flag (defaults to +false). If set, it is used to control if IBRS (Indirect Branch Restricted +Speculation) should be turned off when the CPU enters an idle state. +This flag does not affect CPUs that use Enhanced IBRS which can remain +on with little performance impact. + +For some CPUs, IBRS will be selected as mitigation for Spectre v2 and Retbleed +security vulnerabilities by default. Leaving the IBRS mode on while idling may +have a performance impact on its sibling CPU. The IBRS mode will be turned off +by default when the CPU enters into a deep idle state, but not in some +shallower ones. Setting the ``ibrs_off`` module parameter will force the IBRS +mode to off when the CPU is in any one of the available idle states. This may +help performance of a sibling CPU at the expense of a slightly higher wakeup +latency for the idle CPU. + .. _intel-idle-core-and-package-idle-states: diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index ad392f3aee06..bf13ad25a32f 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -18,8 +18,8 @@ General Information (``CPUFreq``). It is a scaling driver for the Sandy Bridge and later generations of Intel processors. Note, however, that some of those processors may not be supported. [To understand ``intel_pstate`` it is necessary to know -how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if -you have not done that yet.] +how ``CPUFreq`` works in general, so this is the time to read +Documentation/admin-guide/pm/cpufreq.rst if you have not done that yet.] For the processors supported by ``intel_pstate``, the P-state concept is broader than just an operating frequency or an operating performance point (see the @@ -54,17 +54,21 @@ registered (see `below <status_attr_>`_). Operation Modes =============== -``intel_pstate`` can operate in three different modes: in the active mode with -or without hardware-managed P-states support and in the passive mode. Which of -them will be in effect depends on what kernel command line options are used and -on the capabilities of the processor. +``intel_pstate`` can operate in two different modes, active or passive. In the +active mode, it uses its own internal performance scaling governor algorithm or +allows the hardware to do performance scaling by itself, while in the passive +mode it responds to requests made by a generic ``CPUFreq`` governor implementing +a certain performance scaling algorithm. Which of them will be in effect +depends on what kernel command line options are used and on the capabilities of +the processor. Active Mode ----------- -This is the default operation mode of ``intel_pstate``. If it works in this -mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` -policies contains the string "intel_pstate". +This is the default operation mode of ``intel_pstate`` for processors with +hardware-managed P-states (HWP) support. If it works in this mode, the +``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies +contains the string "intel_pstate". In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and provides its own scaling algorithms for P-state selection. Those algorithms @@ -119,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's internal P-state selection logic is expected to focus entirely on performance. This will override the EPP/EPB setting coming from the ``sysfs`` interface -(see `Energy vs Performance Hints`_ below). +(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change +the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this +configuration will be rejected. Also, in this configuration the range of P-states available to the processor's internal P-state selection logic is always restricted to the upper boundary @@ -138,12 +144,13 @@ internal P-state selection logic to be less performance-focused. Active Mode Without HWP ~~~~~~~~~~~~~~~~~~~~~~~ -This is the default operation mode for processors that do not support the HWP -feature. It also is used by default with the ``intel_pstate=no_hwp`` argument -in the kernel command line. However, in this mode ``intel_pstate`` may refuse -to work with the given processor if it does not recognize it. [Note that -``intel_pstate`` will never refuse to work with any processor with the HWP -feature enabled.] +This operation mode is optional for processors that do not support the HWP +feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in +the command line. The active mode is used in those cases if the +``intel_pstate=active`` argument is passed to the kernel in the command line. +In this mode ``intel_pstate`` may refuse to work with processors that are not +recognized by it. [Note that ``intel_pstate`` will never refuse to work with +any processor with the HWP feature enabled.] In this mode ``intel_pstate`` registers utilization update callbacks with the CPU scheduler in order to run a P-state selection algorithm, either @@ -188,10 +195,15 @@ is not set. Passive Mode ------------ -This mode is used if the ``intel_pstate=passive`` argument is passed to the -kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too). -Like in the active mode without HWP support, in this mode ``intel_pstate`` may -refuse to work with the given processor if it does not recognize it. +This is the default operation mode of ``intel_pstate`` for processors without +hardware-managed P-states (HWP) support. It is always used if the +``intel_pstate=passive`` argument is passed to the kernel in the command line +regardless of whether or not the given processor supports HWP. [Note that the +``intel_pstate=no_hwp`` setting causes the driver to start in the passive mode +if it is not combined with ``intel_pstate=active``.] Like in the active mode +without HWP support, in this mode ``intel_pstate`` may refuse to work with +processors that are not recognized by it if HWP is prevented from being enabled +through the kernel command line. If the driver works in this mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq". @@ -312,10 +324,9 @@ manuals need to be consulted to get to it too. For this reason, there is a list of supported processors in ``intel_pstate`` and the driver initialization will fail if the detected processor is not in that -list, unless it supports the `HWP feature <Active Mode_>`_. [The interface to -obtain all of the information listed above is the same for all of the processors -supporting the HWP feature, which is why they all are supported by -``intel_pstate``.] +list, unless it supports the HWP feature. [The interface to obtain all of the +information listed above is the same for all of the processors supporting the +HWP feature, which is why ``intel_pstate`` works with all of them.] User Space Interface in ``sysfs`` @@ -354,6 +365,9 @@ argument is passed to the kernel in the command line. inclusive) including both turbo and non-turbo P-states (see `Turbo P-states Support`_). + This attribute is present only if the value exposed by it is the same + for all of the CPUs in the system. + The value of this attribute is not affected by the ``no_turbo`` setting described `below <no_turbo_attr_>`_. @@ -363,19 +377,22 @@ argument is passed to the kernel in the command line. Ratio of the `turbo range <turbo_>`_ size to the size of the entire range of supported P-states, in percent. + This attribute is present only if the value exposed by it is the same + for all of the CPUs in the system. + This attribute is read-only. .. _no_turbo_attr: ``no_turbo`` If set (equal to 1), the driver is not allowed to set any turbo P-states - (see `Turbo P-states Support`_). If unset (equalt to 0, which is the + (see `Turbo P-states Support`_). If unset (equal to 0, which is the default), turbo P-states can be set by the driver. [Note that ``intel_pstate`` does not support the general ``boost`` attribute (supported by some other scaling drivers) which is replaced by this one.] - This attrubute does not affect the maximum supported frequency value + This attribute does not affect the maximum supported frequency value supplied to the ``CPUFreq`` core and exposed via the policy interface, but it affects the maximum possible value of per-policy P-state limits (see `Interpretation of Policy Attributes`_ below for details). @@ -419,18 +436,24 @@ argument is passed to the kernel in the command line. as well as the per-policy ones) are then reset to their default values, possibly depending on the target operation mode.] - That only is supported in some configurations, though (for example, if - the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, - the operation mode of the driver cannot be changed), and if it is not - supported in the current configuration, writes to this attribute will - fail with an appropriate error. +``energy_efficiency`` + This attribute is only present on platforms with CPUs matching the Kaby + Lake or Coffee Lake desktop CPU model. By default, energy-efficiency + optimizations are disabled on these CPU models if HWP is enabled. + Enabling energy-efficiency optimizations may limit maximum operating + frequency with or without the HWP feature. With HWP enabled, the + optimizations are done only in the turbo frequency range. Without it, + they are done in the entire available frequency range. Setting this + attribute to "1" enables the energy-efficiency optimizations and setting + to "0" disables them. Interpretation of Policy Attributes ----------------------------------- The interpretation of some ``CPUFreq`` policy attributes described in -:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver -and it generally depends on the driver's `operation mode <Operation Modes_>`_. +Documentation/admin-guide/pm/cpufreq.rst is special with ``intel_pstate`` +as the current scaling driver and it generally depends on the driver's +`operation mode <Operation Modes_>`_. First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and ``scaling_cur_freq`` attributes are produced by applying a processor-specific @@ -467,8 +490,8 @@ Next, the following policy attributes have special meaning if policy for the time interval between the last two invocations of the driver's utilization update callback by the CPU scheduler for that CPU. -One more policy attribute is present if the `HWP feature is enabled in the -processor <Active Mode With HWP_>`_: +One more policy attribute is present if the HWP feature is enabled in the +processor: ``base_frequency`` Shows the base frequency of the CPU. Any frequency above this will be @@ -509,11 +532,11 @@ on the following rules, regardless of the current operation mode of the driver: 3. The global and per-policy limits can be set independently. -If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the -resulting effective values are written into its registers whenever the limits -change in order to request its internal P-state selection logic to always set -P-states within these limits. Otherwise, the limits are taken into account by -scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver +In the `active mode with the HWP feature enabled <Active Mode With HWP_>`_, the +resulting effective values are written into hardware registers whenever the +limits change in order to request its internal P-state selection logic to always +set P-states within these limits. Otherwise, the limits are taken into account +by scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver every time before setting a new P-state for a CPU. Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument @@ -524,12 +547,11 @@ at all and the only way to set the limits is by using the policy attributes. Energy vs Performance Hints --------------------------- -If ``intel_pstate`` works in the `active mode with the HWP feature enabled -<Active Mode With HWP_>`_ in the processor, additional attributes are present -in every ``CPUFreq`` policy directory in ``sysfs``. They are intended to allow -user space to help ``intel_pstate`` to adjust the processor's internal P-state -selection logic by focusing it on performance or on energy-efficiency, or -somewhere between the two extremes: +If the hardware-managed P-states (HWP) is enabled in the processor, additional +attributes, intended to allow user space to help ``intel_pstate`` to adjust the +processor's internal P-state selection logic by focusing it on performance or on +energy-efficiency, or somewhere between the two extremes, are present in every +``CPUFreq`` policy directory in ``sysfs``. They are : ``energy_performance_preference`` Current value of the energy vs performance hint for the given policy @@ -548,7 +570,11 @@ somewhere between the two extremes: Strings written to the ``energy_performance_preference`` attribute are internally translated to integer values written to the processor's Energy-Performance Preference (EPP) knob (if supported) or its -Energy-Performance Bias (EPB) knob. +Energy-Performance Bias (EPB) knob. It is also possible to write a positive +integer value between 0 to 255, if the EPP feature is present. If the EPP +feature is not present, writing integer value to this attribute is not +supported. In this case, user can use the +"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface. [Note that tasks may by migrated from one CPU to another by the scheduler's load-balancing algorithm and if different energy vs performance hints are @@ -629,12 +655,14 @@ of them have to be prepended with the ``intel_pstate=`` prefix. Do not register ``intel_pstate`` as the scaling driver even if the processor is supported by it. +``active`` + Register ``intel_pstate`` in the `active mode <Active Mode_>`_ to start + with. + ``passive`` Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to start with. - This option implies the ``no_hwp`` one described below. - ``force`` Register ``intel_pstate`` as the scaling driver instead of ``acpi-cpufreq`` even if the latter is preferred on the given system. @@ -649,13 +677,12 @@ of them have to be prepended with the ``intel_pstate=`` prefix. driver is used instead of ``acpi-cpufreq``. ``no_hwp`` - Do not enable the `hardware-managed P-states (HWP) feature - <Active Mode With HWP_>`_ even if it is supported by the processor. + Do not enable the hardware-managed P-states (HWP) feature even if it is + supported by the processor. ``hwp_only`` Register ``intel_pstate`` as the scaling driver only if the - `hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is - supported by the processor. + hardware-managed P-states (HWP) feature is supported by the processor. ``support_acpi_ppc`` Take ACPI ``_PPC`` performance limits into account. @@ -685,7 +712,7 @@ it works in the `active mode <Active Mode_>`_. The following sequence of shell commands can be used to enable them and see their output (if the kernel is generally configured to support event tracing):: - # cd /sys/kernel/debug/tracing/ + # cd /sys/kernel/tracing/ # echo 1 > events/power/pstate_sample/enable # echo 1 > events/power/cpu_frequency/enable # cat trace @@ -702,10 +729,10 @@ core (for the policies with other scaling governors). The ``ftrace`` interface can be used for low-level diagnostics of ``intel_pstate``. For example, to check how often the function to set a -P-state is called, the ``ftrace`` filter can be set to to +P-state is called, the ``ftrace`` filter can be set to :c:func:`intel_pstate_set_pstate`:: - # cd /sys/kernel/debug/tracing/ + # cd /sys/kernel/tracing/ # cat available_filter_functions | grep -i pstate intel_pstate_set_pstate intel_pstate_cpu_init diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst new file mode 100644 index 000000000000..5ab3440e6cee --- /dev/null +++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +============================== +Intel Uncore Frequency Scaling +============================== + +:Copyright: |copy| 2022-2023 Intel Corporation + +:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + +Introduction +------------ + +The uncore can consume significant amount of power in Intel's Xeon servers based +on the workload characteristics. To optimize the total power and improve overall +performance, SoCs have internal algorithms for scaling uncore frequency. These +algorithms monitor workload usage of uncore and set a desirable frequency. + +It is possible that users have different expectations of uncore performance and +want to have control over it. The objective is similar to allowing users to set +the scaling min/max frequencies via cpufreq sysfs to improve CPU performance. +Users may have some latency sensitive workloads where they do not want any +change to uncore frequency. Also, users may have workloads which require +different core and uncore performance at distinct phases and they may want to +use both cpufreq and the uncore scaling interface to distribute power and +improve overall performance. + +Sysfs Interface +--------------- + +To control uncore frequency, a sysfs interface is provided in the directory: +`/sys/devices/system/cpu/intel_uncore_frequency/`. + +There is one directory for each package and die combination as the scope of +uncore scaling control is per die in multiple die/package SoCs or per +package for single die per package SoCs. The name represents the +scope of control. For example: 'package_00_die_00' is for package id 0 and +die 0. + +Each package_*_die_* contains the following attributes: + +``initial_max_freq_khz`` + Out of reset, this attribute represent the maximum possible frequency. + This is a read-only attribute. If users adjust max_freq_khz, + they can always go back to maximum using the value from this attribute. + +``initial_min_freq_khz`` + Out of reset, this attribute represent the minimum possible frequency. + This is a read-only attribute. If users adjust min_freq_khz, + they can always go back to minimum using the value from this attribute. + +``max_freq_khz`` + This attribute is used to set the maximum uncore frequency. + +``min_freq_khz`` + This attribute is used to set the minimum uncore frequency. + +``current_freq_khz`` + This attribute is used to get the current uncore frequency. + +SoCs with TPMI (Topology Aware Register and PM Capsule Interface) +----------------------------------------------------------------- + +An SoC can contain multiple power domains with individual or collection +of mesh partitions. This partition is called fabric cluster. + +Certain type of meshes will need to run at the same frequency, they will +be placed in the same fabric cluster. Benefit of fabric cluster is that it +offers a scalable mechanism to deal with partitioned fabrics in a SoC. + +The current sysfs interface supports controls at package and die level. +This interface is not enough to support more granular control at +fabric cluster level. + +SoCs with the support of TPMI (Topology Aware Register and PM Capsule +Interface), can have multiple power domains. Each power domain can +contain one or more fabric clusters. + +To represent controls at fabric cluster level in addition to the +controls at package and die level (like systems without TPMI +support), sysfs is enhanced. This granular interface is presented in the +sysfs with directories names prefixed with "uncore". For example: +uncore00, uncore01 etc. + +The scope of control is specified by attributes "package_id", "domain_id" +and "fabric_cluster_id" in the directory. + +Attributes in each directory: + +``domain_id`` + This attribute is used to get the power domain id of this instance. + +``fabric_cluster_id`` + This attribute is used to get the fabric cluster id of this instance. + +``package_id`` + This attribute is used to get the package id of this instance. + +The other attributes are same as presented at package_*_die_* level. + +In most of current use cases, the "max_freq_khz" and "min_freq_khz" +is updated at "package_*_die_*" level. This model will be still supported +with the following approach: + +When user uses controls at "package_*_die_*" level, then every fabric +cluster is affected in that package and die. For example: user changes +"max_freq_khz" in the package_00_die_00, then "max_freq_khz" for uncore* +directory with the same package id will be updated. In this case user can +still update "max_freq_khz" at each uncore* level, which is more restrictive. +Similarly, user can update "min_freq_khz" at "package_*_die_*" level +to apply at each uncore* level. + +Support for "current_freq_khz" is available only at each fabric cluster +level (i.e., in uncore* directory). diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst index 0a38cdf39df1..ee45887811ff 100644 --- a/Documentation/admin-guide/pm/working-state.rst +++ b/Documentation/admin-guide/pm/working-state.rst @@ -11,5 +11,8 @@ Working-State Power Management intel_idle cpufreq intel_pstate + amd-pstate cpufreq_drivers intel_epb + intel-speed-select + intel_uncore_frequency_scaling |