diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-qat_rl')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-qat_rl | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-qat_rl b/Documentation/ABI/testing/sysfs-driver-qat_rl new file mode 100644 index 000000000000..8c282ae3155d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-qat_rl @@ -0,0 +1,226 @@ +What: /sys/bus/pci/devices/<BDF>/qat_rl/sla_op +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (WO) This attribute is used to perform an operation on an SLA. + The supported operations are: add, update, rm, rm_all, and get. + + Input values must be filled through the associated attribute in + this group before a write to this file. + If the operation completes successfully, the associated + attributes will be updated. + The associated attributes are: cir, pir, srv, rp, and id. + + Supported operations: + + * add: Creates a new SLA with the provided inputs from user. + * Inputs: cir, pir, srv, and rp + * Output: id + + * get: Returns the configuration of the specified SLA in id attribute + * Inputs: id + * Outputs: cir, pir, srv, and rp + + * update: Updates the SLA with new values set in the following attributes + * Inputs: id, cir, and pir + + * rm: Removes the specified SLA in the id attribute. + * Inputs: id + + * rm_all: Removes all the configured SLAs. + * Inputs: None + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/rp +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) When read, reports the current assigned ring pairs for the + queried SLA. + When wrote to, configures the ring pairs associated to a new SLA. + + The value is a 64-bit bit mask and is written/displayed in hex. + Each bit of this mask represents a single ring pair i.e., + bit 1 == ring pair id 0; bit 3 == ring pair id 2. + + Selected ring pairs must to be assigned to a single service, + i.e. the one provided with the srv attribute. The service + assigned to a certain ring pair can be checked by querying + the attribute qat/rp2srv. + + The maximum number of ring pairs is 4 per SLA. + + Applicability in sla_op: + + * WRITE: add operation + * READ: get operation + + Example usage:: + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # cat /sys/bus/pci/devices/<BDF>/qat_rl/rp + 0x5 + + ## Write + # echo 0x5 > /sys/bus/pci/devices/<BDF>/qat_rl/rp + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/id +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) If written to, the value is used to retrieve a particular + SLA and operate on it. + This is valid only for the following operations: update, rm, + and get. + A read of this attribute is only guaranteed to have correct data + after creation of an SLA. + + Applicability in sla_op: + + * WRITE: rm and update operations + * READ: add and get operations + + Example usage:: + + ## Read + ## Set attributes e.g. cir, pir, srv, etc + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/id + 4 + + ## Write + # echo 7 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/rp + 0x5 ## ring pair ID 0 and ring pair ID 2 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/cir +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Committed information rate (CIR). Rate guaranteed to be + achieved by a particular SLA. The value is expressed in + permille scale, i.e. 1000 refers to the maximum device + throughput for a selected service. + + After sending a "get" to sla_op, this will be populated with the + CIR for that queried SLA. + Write to this file before sending an "add/update" sla_op, to set + the SLA to the specified value. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo 500 > /sys/bus/pci/devices/<BDF>/qat_rl/cir + # echo "add" /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cir + 500 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/pir +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Peak information rate (PIR). The maximum rate that can be + achieved by that particular SLA. An SLA can reach a value + between CIR and PIR when the device is not fully utilized by + requests from other users (assigned to different SLAs). + + After sending a "get" to sla_op, this will be populated with the + PIR for that queried SLA. + Write to this file before sending an "add/update" sla_op, to set + the SLA to the specified value. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo 750 > /sys/bus/pci/devices/<BDF>/qat_rl/pir + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/pir + 750 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/srv +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Service (SRV). Represents the service (sym, asym, dc) + associated to an SLA. + Can be written to or queried to set/show the SRV type for an SLA. + The SRV attribute is used to specify the SRV type before adding + an SLA. After an SLA is configured, reports the service + associated to that SLA. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo "dc" > /sys/bus/pci/devices/<BDF>/qat_rl/srv + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/id + 4 + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/srv + dc + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) This file will return the remaining capability for a + particular service/sla. This is the remaining value that a new + SLA can be set to or a current SLA can be increased with. + + Example usage:: + + # echo "asym" > /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + 250 + # echo 250 > /sys/bus/pci/devices/<BDF>/qat_rl/cir + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + 0 + + This attribute is only available for qat_4xxx devices. |