diff options
Diffstat (limited to 'Documentation/ABI/stable/sysfs-driver-dma-idxd')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-driver-dma-idxd | 188 |
1 files changed, 176 insertions, 12 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd index b44183880935..f2ec42949a54 100644 --- a/Documentation/ABI/stable/sysfs-driver-dma-idxd +++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd @@ -22,6 +22,7 @@ Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The largest number of work descriptors in a batch. + It's not visible when the device does not support batch. What: /sys/bus/dsa/devices/dsa<m>/max_work_queues_size Date: Oct 25, 2019 @@ -41,14 +42,16 @@ KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The maximum number of groups can be created under this device. -What: /sys/bus/dsa/devices/dsa<m>/max_tokens -Date: Oct 25, 2019 -KernelVersion: 5.6.0 +What: /sys/bus/dsa/devices/dsa<m>/max_read_buffers +Date: Dec 10, 2021 +KernelVersion: 5.17.0 Contact: dmaengine@vger.kernel.org -Description: The total number of bandwidth tokens supported by this device. - The bandwidth tokens represent resources within the DSA +Description: The total number of read buffers supported by this device. + The read buffers represent resources within the DSA implementation, and these resources are allocated by engines to - support operations. + support operations. See DSA spec v1.2 9.2.4 Total Read Buffers. + It's not visible when the device does not support Read Buffer + allocation control. What: /sys/bus/dsa/devices/dsa<m>/max_transfer_size Date: Oct 25, 2019 @@ -77,6 +80,13 @@ Contact: dmaengine@vger.kernel.org Description: The operation capability bit mask specify the operation types supported by the this device. +What: /sys/bus/dsa/devices/dsa<m>/pasid_enabled +Date: Oct 27, 2020 +KernelVersion: 5.11.0 +Contact: dmaengine@vger.kernel.org +Description: To indicate if user PASID (process address space identifier) is + enabled or not for this device. + What: /sys/bus/dsa/devices/dsa<m>/state Date: Oct 25, 2019 KernelVersion: 5.6.0 @@ -108,19 +118,46 @@ KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: To indicate if this device is configurable or not. -What: /sys/bus/dsa/devices/dsa<m>/token_limit -Date: Oct 25, 2019 -KernelVersion: 5.6.0 +What: /sys/bus/dsa/devices/dsa<m>/read_buffer_limit +Date: Dec 10, 2021 +KernelVersion: 5.17.0 Contact: dmaengine@vger.kernel.org -Description: The maximum number of bandwidth tokens that may be in use at +Description: The maximum number of read buffers that may be in use at one time by operations that access low bandwidth memory in the - device. + device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit. + It's not visible when the device does not support Read Buffer + allocation control. What: /sys/bus/dsa/devices/dsa<m>/cmd_status Date: Aug 28, 2020 KernelVersion: 5.10.0 Contact: dmaengine@vger.kernel.org Description: The last executed device administrative command's status/error. + Also last configuration error overloaded. + Writing to it will clear the status. + +What: /sys/bus/dsa/devices/dsa<m>/iaa_cap +Date: Sept 14, 2022 +KernelVersion: 6.0.0 +Contact: dmaengine@vger.kernel.org +Description: IAA (IAX) capability mask. Exported to user space for application + consumption. This attribute should only be visible on IAA devices + that are version 2 or later. + +What: /sys/bus/dsa/devices/dsa<m>/event_log_size +Date: Sept 14, 2022 +KernelVersion: 6.4.0 +Contact: dmaengine@vger.kernel.org +Description: The event log size to be configured. Default is 64 entries and + occupies 4k size if the evl entry is 64 bytes. It's visible + only on platforms that support the capability. + +What: /sys/bus/dsa/devices/wq<m>.<n>/block_on_fault +Date: Oct 27, 2020 +KernelVersion: 5.11.0 +Contact: dmaengine@vger.kernel.org +Description: To indicate block on fault is allowed or not for the work queue + to support on demand paging. What: /sys/bus/dsa/devices/wq<m>.<n>/group_id Date: Oct 25, 2019 @@ -159,7 +196,7 @@ What: /sys/bus/dsa/devices/wq<m>.<n>/priority Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org -Description: The priority value of this work queue, it is a vlue relative to +Description: The priority value of this work queue, it is a value relative to other work queue in the same group to control quality of service for dispatching work from multiple workqueues in the same group. @@ -189,9 +226,136 @@ KernelVersion: 5.10.0 Contact: dmaengine@vger.kernel.org Description: The max batch size for this workqueue. Cannot exceed device max batch size. Configurable parameter. + It's not visible when the device does not support batch. + +What: /sys/bus/dsa/devices/wq<m>.<n>/ats_disable +Date: Nov 13, 2020 +KernelVersion: 5.11.0 +Contact: dmaengine@vger.kernel.org +Description: Indicate whether ATS disable is turned on for the workqueue. + 0 indicates ATS is on, and 1 indicates ATS is off for the workqueue. + +What: /sys/bus/dsa/devices/wq<m>.<n>/prs_disable +Date: Sept 14, 2022 +KernelVersion: 6.4.0 +Contact: dmaengine@vger.kernel.org +Description: Controls whether PRS disable is turned on for the workqueue. + 0 indicates PRS is on, and 1 indicates PRS is off for the + workqueue. This option overrides block_on_fault attribute + if set. It's visible only on platforms that support the + capability. + +What: /sys/bus/dsa/devices/wq<m>.<n>/occupancy +Date May 25, 2021 +KernelVersion: 5.14.0 +Contact: dmaengine@vger.kernel.org +Description: Show the current number of entries in this WQ if WQ Occupancy + Support bit WQ capabilities is 1. + +What: /sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries +Date Oct 29, 2021 +KernelVersion: 5.17.0 +Contact: dmaengine@vger.kernel.org +Description: Indicate the number of retires for an enqcmds submission on a sharedwq. + A max value to set attribute is capped at 64. + +What: /sys/bus/dsa/devices/wq<m>.<n>/op_config +Date: Sept 14, 2022 +KernelVersion: 6.0.0 +Contact: dmaengine@vger.kernel.org +Description: Shows the operation capability bits displayed in bitmap format + presented by %*pb printk() output format specifier. + The attribute can be configured when the WQ is disabled in + order to configure the WQ to accept specific bits that + correlates to the operations allowed. It's visible only + on platforms that support the capability. + +What: /sys/bus/dsa/devices/wq<m>.<n>/driver_name +Date: Sept 8, 2023 +KernelVersion: 6.7.0 +Contact: dmaengine@vger.kernel.org +Description: Name of driver to be bounded to the wq. What: /sys/bus/dsa/devices/engine<m>.<n>/group_id Date: Oct 25, 2019 KernelVersion: 5.6.0 Contact: dmaengine@vger.kernel.org Description: The group that this engine belongs to. + +What: /sys/bus/dsa/devices/group<m>.<n>/use_read_buffer_limit +Date: Dec 10, 2021 +KernelVersion: 5.17.0 +Contact: dmaengine@vger.kernel.org +Description: Enable the use of global read buffer limit for the group. See DSA + spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit. + It's not visible when the device does not support Read Buffer + allocation control. + +What: /sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed +Date: Dec 10, 2021 +KernelVersion: 5.17.0 +Contact: dmaengine@vger.kernel.org +Description: Indicates max number of read buffers that may be in use at one time + by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read + Buffers Allowed. + It's not visible when the device does not support Read Buffer + allocation control. + +What: /sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved +Date: Dec 10, 2021 +KernelVersion: 5.17.0 +Contact: dmaengine@vger.kernel.org +Description: Indicates the number of Read Buffers reserved for the use of + engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers + Reserved. + It's not visible when the device does not support Read Buffer + allocation control. + +What: /sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit +Date: Sept 14, 2022 +KernelVersion: 6.0.0 +Contact: dmaengine@vger.kernel.org +Description: Allows control of the number of work descriptors that can be + concurrently processed by an engine in the group as a fraction + of the Maximum Work Descriptors in Progress value specified in + the ENGCAP register. The acceptable values are 0 (default), + 1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of + the max value). It's visible only on platforms that support + the capability. + +What: /sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit +Date: Sept 14, 2022 +KernelVersion: 6.0.0 +Contact: dmaengine@vger.kernel.org +Description: Allows control of the number of batch descriptors that can be + concurrently processed by an engine in the group as a fraction + of the Maximum Batch Descriptors in Progress value specified in + the ENGCAP register. The acceptable values are 0 (default), + 1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of + the max value). It's visible only on platforms that support + the capability. + +What: /sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/cr_faults +Date: Sept 14, 2022 +KernelVersion: 6.4.0 +Contact: dmaengine@vger.kernel.org +Description: Show the number of Completion Record (CR) faults this application + has caused. + +What: /sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/cr_fault_failures +Date: Sept 14, 2022 +KernelVersion: 6.4.0 +Contact: dmaengine@vger.kernel.org +Description: Show the number of Completion Record (CR) faults failures that this + application has caused. The failure counter is incremented when the + driver cannot fault in the address for the CR. Typically this is caused + by a bad address programmed in the submitted descriptor or a malicious + submitter is using bad CR address on purpose. + +What: /sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/pid +Date: Sept 14, 2022 +KernelVersion: 6.4.0 +Contact: dmaengine@vger.kernel.org +Description: Show the process id of the application that opened the file. This is + helpful information for a monitor daemon that wants to kill the + application that opened the file. |