| Age | Commit message (Collapse) | Author |
|---|
|
Pull MIPS fixes from Ralf Baechle:
"Two more MIPS fixes for 4.9:
- RTC: Return -ENODEV so an external RTC will be tried
- Fix mask of GPE frequency
These two have been tested on Imagination's automated test system and
also both received positive reviews on the linux-mips mailing list"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Lantiq: Fix mask of GPE frequency
MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time
|
|
The hardware documentation says bit 11:10 are used for the GPE
frequency selection. Fix the mask in the define to match these bits.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Langer <thomas.langer@intel.com>
Cc: linux-mips@linux-mips.org
Cc: john@phrozen.org
Patchwork: https://patchwork.linux-mips.org/patch/14648/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The sync_cmos_clock function in kernel/time/ntp.c first tries to update
the internal clock of the cpu by calling the "update_persistent_clock64"
architecture specific function. If this returns -ENODEV, it then tries
to update an external RTC using "rtc_set_ntp_time".
On the mips architecture, the weak implementation of the underlying
function would return 0 if it wasn't overridden. This meant that the
sync_cmos_clock function would never try to update an external RTC
(if both CONFIG_GENERIC_CMOS_UPDATE and CONFIG_RTC_SYSTOHC are
configured)
Returning -ENODEV instead, means that an external RTC will be tried.
Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Reviewed-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Reviewed-by: Scott Parlane <scott.parlane@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14649/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Final batch of SoC fixes
A few fixes that have trickled in over the last week, all fixing minor
errors in devicetrees -- UART pin assignment on Allwinner H3,
correcting number of SATA ports on a Marvell-based Linkstation
platform and a display clock fix for Freescale/NXP i.MX7D that fixes a
freeze when starting up X"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
ARM: dts: imx7d: fix LCDIF clock assignment
dts: sun8i-h3: correct UART3 pin definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k fixes from Geert Uytterhoeven:
- build fix for drivers calling ndelay() in a conditional block without
curly braces
- defconfig updates
* tag 'm68k-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Fix ndelay() macro
m68k/defconfig: Update defconfigs for v4.9-rc1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Three important fixes for the parisc architecture.
Dave provided two patches: One which purges the TLB before setting a
PTE entry and a second one which drops unnecessary TLB flushes. Both
patches have been tested for one week on the debian buildd servers and
prevent random segmentation faults.
The patch from me fixes a crash at boot inside the TLB measuring code
on SMP machines with PA8000-PA8700 CPUs (specifically A500-44 and
J5000 servers)"
* 'parisc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix TLB related boot crash on SMP machines
parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and flush_icache_page_asm
parisc: Purge TLB before setting PTE
|
|
At bootup we run measurements to calculate the best threshold for when we
should be using full TLB flushes instead of just flushing a specific amount of
TLB entries. This performance test is run over the kernel text segment.
But running this TLB performance test on the kernel text segment turned out to
crash some SMP machines when the kernel text pages were mapped as huge pages.
To avoid those crashes this patch simply skips this test on some SMP machines
and calculates an optimal threshold based on the maximum number of available
TLB entries and number of online CPUs.
On a technical side, this seems to happen:
The TLB measurement code uses flush_tlb_kernel_range() to flush specific TLB
entries with a page size of 4k (pdtlb 0(sr1,addr)). On UP systems this purge
instruction seems to work without problems even if the pages were mapped as
huge pages. But on SMP systems the TLB purge instruction is broadcasted to
other CPUs. Those CPUs then crash the machine because the page size is not as
expected. C8000 machines with PA8800/PA8900 CPUs were not affected by this
problem, because the required cache coherency prohibits to use huge pages at
all. Sadly I didn't found any documentation about this behaviour, so this
finding is purely based on testing with phyiscal SMP machines (A500-44 and
J5000, both were 2-way boxes).
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Bug report from Debian [0] shows there's minor changed model of
Linkstation LS-GL that uses the 2nd SATA port of the SoC.
So it's necessary to enable two SATA ports, though for that specific
model only the 2nd one is used.
[0] https://bugs.debian.org/845611
Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")
Reported-by: Ryan Tandy <ryan@nardis.ca>
Tested-by: Ryan Tandy <ryan@nardis.ca>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them
separately:
Clock Clock Root Description
apb_clk MAIN_AXI_CLK_ROOT AXI clock
pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock
ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock
All of them are switched by a single gate, which is part of the
IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for
the AXI bus clock (clock-name "axi") makes sure the gate gets
enabled when accessing registers.
There seem to be no separate AXI display clock, and the clock is
optional. Hence remove the dummy clock.
This fixes kernel freezes when starting the X-Server (which
disables/re-enables the display controller).
Fixes: e8ed73f691bd ("ARM: dts: imx7d: add lcdif support")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
In a previous commit, I made a copy/paste error in the pinmux
definitions of UART3: PG{13,14} instead of PA{13,14}. This commit takes
care of that. I have tested this commit on Orange Pi PC and Orange Pi
Plus, and it works for these boards.
Fixes: e3d11d3c45c5 ("dts: sun8i-h3: add pinmux definitions for
UART2-3")
Signed-off-by: Jorik Jonker <jorik@kippendief.biz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a core dumping crash fix, a guess-unwinder regression fix,
plus three build warning fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind: Fix guess-unwinder regression
x86/build: Annotate die() with noreturn to fix build warning on clang
x86/platform/olpc: Fix resume handler build warning
x86/apic/uv: Silence a shift wrapping warning
x86/coredump: Always use user_regs_struct for compat_elf_gregset_t
|
|
flush_icache_page_asm
We have four routines in pacache.S that use temporary alias pages:
copy_user_page_asm(), clear_user_page_asm(), flush_dcache_page_asm() and
flush_icache_page_asm(). copy_user_page_asm() and clear_user_page_asm()
don't purge the TLB entry used for the operation.
flush_dcache_page_asm() and flush_icache_page_asm do purge the entry.
Presumably, this was thought to optimize TLB use. However, the
operation is quite heavy weight on PA 1.X processors as we need to take
the TLB lock and a TLB broadcast is sent to all processors.
This patch removes the purges from flush_dcache_page_asm() and
flush_icache_page_asm.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The attached change interchanges the order of purging the TLB and
setting the corresponding page table entry. TLB purges are strongly
ordered. It occurred to me one night that setting the PTE first might
have subtle ordering issues on SMP machines and cause random memory
corruption.
A TLB lock guards the insertion of user TLB entries. So after the TLB
is purged, a new entry can't be inserted until the lock is released.
This ensures that the new PTE value is used when the lock is released.
Since making this change, no random segmentation faults have been
observed on the Debian hppa buildd servers.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Lukasz reported that perf stat counters overflow handling is broken on KNL/SLM.
Both these parts have full_width_write set, and that does indeed have
a problem. In order to deal with counter wrap, we must sample the
counter at at least half the counter period (see also the sampling
theorem) such that we can unambiguously reconstruct the count.
However commit:
069e0c3c4058 ("perf/x86/intel: Support full width counting")
sets the sampling interval to the full period, not half.
Fixing that exposes another issue, in that we must not sign extend the
delta value when we shift it right; the counter cannot have
decremented after all.
With both these issues fixed, counter overflow functions correctly
again.
Reported-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Tested-by: Liang, Kan <kan.liang@intel.com>
Tested-by: Odzioba, Lukasz <lukasz.odzioba@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org
Fixes: 069e0c3c4058 ("perf/x86/intel: Support full width counting")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The Knights Mill is enough close to Knights Landing so the path reuses
C-state residency support of the latter.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20161201000853.18260-1-piotr.luc@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Four fixes, the first for code we merged this cycle and three that are
also going to stable:
- On 64-bit Book3E we were not placing the .text section where we
said we would in the asm.
- We broke building the boot wrapper on some 32-bit toolchains.
- Lazy icache flushing was broken on pre-POWER5 machines.
- One of the error paths in our EEH code would lead to a deadlock.
Thanks to: Andrew Donnellan, Ben Hutchings, Benjamin Herrenschmidt,
Nicholas Piggin"
* tag 'powerpc-4.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix placement of .text to be immediately following .head.text
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
powerpc/mm: Fix lazy icache flush on pre-POWER5
powerpc/boot: Fix build failure in 32-bit boot wrapper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes for arm-soc in v4.9. None of
these are critical regressions, but it would be nice to still get them
merged.
- On the Juno platform, the idle latency was described wrong, leading
to suboptimal cpuidle tuning.
- Also on the same platform, PCI I/O space was set up incorrectly and
could not work.
- On the sti platform, a syntactically incorrect DT entry caused
warnings.
- The newly added 'gr8' platform has somewhat confusing file names,
which we rename for consistency"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
arm64: dts: juno: Correct PCI IO window
ARM: dts: STiH407-family: fix i2c nodes
ARM: gr8: Rename the DTSI and relevant DTS
|
|
The core and the cluster sleep state entry latencies can't be same as
cluster sleep involves more work compared to core level e.g. shared
cache maintenance.
Experiments have shown on an average about 100us more latency for the
cluster sleep state compared to the core level sleep. This patch fixes
the entry latency for the cluster sleep state.
Fixes: 28e10a8f3a03 ("arm64: dts: juno: Add idle-states to device tree")
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Do not introduce any additional alignment. Placement of text section
will be set by fixed section macros. Without this, output section
alignment defaults to 4096, which makes BookE text section start at
0x1000 when it is expected to start at 0x100.
This was introduced by commit 57f266497d81 ("powerpc: Use gas sections
for arranging exception vectors") and was caught with the scripted head
section checker (not yet merged).
Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In eeh_reset_device(), we take the pci_rescan_remove_lock immediately after
after we call eeh_reset_pe() to reset the PCI controller. We then call
eeh_clear_pe_frozen_state(), which can return an error. In this case, we
bail out of eeh_reset_device() without calling pci_unlock_rescan_remove().
Add a call to pci_unlock_rescan_remove() in the eeh_clear_pe_frozen_state()
error path so that we don't cause a deadlock later on.
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Fixes: 78954700631f ("powerpc/eeh: Avoid I/O access during PE reset")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The PCIe root complex on Juno translates the MMIO mapped
at 0x5f800000 to the PIO address range starting at 0
(which is common because PIO addresses are generally < 64k).
Correct the DT to reflect this.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
commit 1c3c90930392 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr
from pfn, but the page shift was getting truncated to 32 bits since we lost
the proper cast to 64 bits (for PAE400
Instead of reverting that commit, use a better helper which is 32/64 bits
safe just like ARM implementation.
Fixes: 1c3c90930392 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
[vgupta: massaged changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
On 64-bit CPUs with no-execute support and non-snooping icache, such as
970 or POWER4, we have a software mechanism to ensure coherency of the
cache (using exec faults when needed).
This was broken due to a logic error when the code was rewritten
from assembly to C, previously the assembly code did:
BEGIN_FTR_SECTION
mr r4,r30
mr r5,r7
bl hash_page_do_lazy_icache
END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
Which tests that:
(cpu_features & (NOEXECUTE | COHERENT_ICACHE)) == NOEXECUTE
Which says that the current cpu does have NOEXECUTE, but does not have
COHERENT_ICACHE.
Fixes: 91f1da99792a ("powerpc/mm: Convert 4k hash insert to C")
Fixes: 89ff725051d1 ("powerpc/mm: Convert __hash_page_64K to C")
Fixes: a43c0eb8364c ("powerpc/mm: Convert 4k insert from asm to C")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Change log verbosification]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Apparenty this is coming in the way of gcc fix which inhibits the usage
of LP_COUNT as a gpr.
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
OPAL is not callable from 32-bit mode and the assembly code for it
may not even build (depending on how binutils was configured).
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=powerpcspe&ver=4.8.7-1&stamp=1479203712
Fixes: 656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
My attempt at fixing some KASAN false positive warnings was rather brain
dead, and it broke the guess unwinder. With frame pointers disabled,
/proc/<pid>/stack is broken:
# cat /proc/1/stack
[<ffffffffffffffff>] 0xffffffffffffffff
Restore the code flow to more closely resemble its previous state, while
still using READ_ONCE_NOCHECK() macros to silence KASAN false positives.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c2d75e03d630 ("x86/unwind: Prevent KASAN false positive warnings in guess unwinder")
Link: http://lkml.kernel.org/r/b824f92c2c22eca5ec95ac56bd2a7c84cf0b9df9.1480309971.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fixes below warning with clang:
In file included from ../arch/x86/tools/relocs_64.c:17:
../arch/x86/tools/relocs.c:977:6: warning: variable 'do_reloc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161126222229.673-1-pefoley2@pefoley.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix:
arch/x86/platform/olpc/olpc-xo15-sci.c:199:12: warning: ‘xo15_sci_resume’
defined but not used [-Wunused-function]
static int xo15_sci_resume(struct device *dev)
^
which I see in randconfig builds here.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161126142706.13602-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.9:
- Fix unreadable output in __do_page_fault due to the KERN_CONT
patchset
- Correctly handle MIPS R6 fixes to the c0_wired register"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: mm: Fix output of __do_page_fault
MIPS: Mask out limit field when calculating wired entry count
|
|
Pull ARM fix from Russell King:
"This resolves the ksyms issues by reverting the commit which
introduced the breakage"
There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "arm: move exports to definitions"
|
|
Pull KVM fixes from Radim Krčmář:
"Four fixes for bugs found by syzkaller on x86, all for stable"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check for pic and ioapic presence before use
KVM: x86: fix out-of-bounds accesses of rtc_eoi map
KVM: x86: drop error recovery in em_jmp_far and em_ret_far
KVM: x86: fix out-of-bounds access in lapic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Set missing wakeup bit in LPCR on POWER9
- Fix the early OPAL console wrappers
- Fixup kernel read only mapping
Fixes for code merged this cycle:
- Fix missing CRCs, add more asm-prototypes.h declarations"
* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fixup kernel read only mapping
powerpc/boot: Fix the early OPAL console wrappers
powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
powerpc: Set missing wakeup bit in LPCR on POWER9
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we were still seeing occasional random segmentation faults
and memory corruption on SMP machines. Dave Anglin then looked again
at the TLB related code and found two issues in the PCI DMA and
generic TLB flush functions.
Then, in our startup code we had some timing of the cache and TLB
functions to calculate a threshold when to use a complete TLB/cache
flush or just to flush a specific range. This code produced a race
with newly started CPUs and thus lead to occasional kernel crashes
(due to stale TLB/cache entries). The patch by Dave fixes this issue
by flushing the local caches before starting secondary CPUs and by
removing the race.
The last problem fixed by this series is that we quite often suffered
from hung tasks and self-detected stalls on the CPUs. It was somehow
clear that this was related to the (in v4.7) newly introduced cr16
clocksource and the own implementation of sched_clock(). I replaced
the open-coded sched_clock() function and switched to the generic
sched_clock() implementation which seems to have fixed this isse as
well.
All patches have been sucessfully tested on a variety of machines,
including our debian buildd servers.
All patches (beside the small pr_cont fix) are tagged for stable
releases"
* 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Switch to generic sched_clock implementation
parisc: Fix races in parisc_setup_cache_timing()
parisc: Fix printk continuations in system detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes
Pull "STi DT fix" from Patrice Chotard:
The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.
* tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: fix i2c nodes
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Pull "Allwinner fixes for 4.9, second iteration" from Maxime Ripard:
A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.
* tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: gr8: Rename the DTSI and relevant DTS
|
|
This is the second issue I noticed in reviewing the parisc TLB code.
The fic instruction may use either the instruction or data TLB in
flushing the instruction cache. Thus, on machines with a split TLB, we
should also flush the data TLB after setting up the temporary alias
registers.
Although this has no functional impact, I changed the pdtlb and pitlb
instructions to consistently use the index register %r0. These
instructions do not support integer displacements.
Tested on rp3440 and c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We are still troubled by occasional random segmentation faults and
memory memory corruption on SMP machines. The causes quite a few
package builds to fail on the Debian buildd machines for parisc. When
gcc-6 failed to build three times in a row, I looked again at the TLB
related code. I found a couple of issues. This is the first.
In general, we need to ensure page table updates and corresponding TLB
purges are atomic. The attached patch fixes an instance in pci-dma.c
where the page table update was not guarded by the TLB lock.
Tested on rp3440 and c8000. So far, no further random segmentation
faults have been observed.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Drop the open-coded sched_clock() function and replace it by the provided
GENERIC_SCHED_CLOCK implementation. We have seen quite some hung tasks in the
past, which seem to be fixed by this patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Helge reported to me the following startup crash:
[ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 9000/785/J5000
[ 0.000000] Total Memory: 2048 MB
[ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB)
[ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB)
[ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB)
[ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB)
[ 0.768910] Brought up 1 CPUs
[ 0.992465] NET: Registered protocol family 16
[ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
[ 3.000419] _______________________________
[ 3.000419] < Your System ate a SPARC! Gah! >
[ 3.000419] -------------------------------
[ 3.000419] \ ^__^
[ 3.000419] (__)\ )\/\
[ 3.000419] U ||----w |
[ 3.000419] || ||
[ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000
[ 9.528040]
[ 10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158
[ 10.868052] IIR: 43ffff80 ISR: 0000000000340000 IOR: 000001ff54150960
[ 10.960029] CPU: 1 CR30: 00000000bfd50000 CR31: 0000000011111111
[ 11.052057] ORIG_R28: 000000004021e3b4
[ 11.100045] IAOQ[0]: irq_exit+0x94/0x120
[ 11.152062] IAOQ[1]: irq_exit+0x98/0x120
[ 11.208031] RP(r2): irq_exit+0xb8/0x120
[ 11.256074] Backtrace:
[ 11.288067] [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598
[ 11.368058] [<0000000040109528>] smp_callin+0x2c0/0x2f0
[ 11.436308] [<00000000402b53fc>] update_curr+0x18c/0x2d0
[ 11.508055] [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030
[ 11.584040] [<00000000402b3cc0>] set_next_entity+0x80/0xd30
[ 11.660069] [<00000000402c1594>] pick_next_task_fair+0x614/0x720
[ 11.740085] [<000000004020dd34>] __schedule+0x394/0xa60
[ 11.808054] [<000000004020e488>] schedule+0x88/0x118
[ 11.876039] [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0
[ 11.948090] [<000000004028fc4c>] kthread+0x1ec/0x248
[ 12.016053] [<0000000040205020>] end_fault_vector+0x20/0xc0
[ 12.092239] [<00000000402050c0>] _switch_to_ret+0x0/0xf40
[ 12.164044]
[ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 12.244040] Backtrace:
[ 12.244040] [<000000004021c480>] show_stack+0x68/0x80
[ 12.244040] [<00000000406f332c>] dump_stack+0xec/0x168
[ 12.244040] [<000000004021c74c>] die_if_kernel+0x25c/0x430
[ 12.244040] [<000000004022d320>] handle_unaligned+0xb48/0xb50
[ 12.244040]
[ 12.632066] ---[ end trace 9ca05a7215c7bbb2 ]---
[ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task!
We have the insn 0x43ffff80 in IIR but from IAOQ we should have:
4025d150: 0f f3 20 df ldd,s r19(r31),r31
4025d154: 0f 9f 00 9c ldw r31(ret0),ret0
4025d158: bf 80 20 58 cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc>
Cpu0 has just completed running parisc_setup_cache_timing:
[ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
From the backtrace, cpu1 is in smp_callin:
void __init smp_callin(void)
{
int slave_id = cpu_now_booting;
smp_cpu_init(slave_id);
preempt_disable();
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
local_irq_enable(); /* Interrupts have been off until now */
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
So, it has just flushed its caches and the TLB. It would seem either the
flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel
memory.
The attached patch reworks parisc_setup_cache_timing to remove the races
in setting the cache and TLB flush thresholds. It also corrects the
number of bytes flushed in the TLB calculation.
The patch flushes the cache and TLB on cpu0 before starting the
secondary processors so that they are started from a known state.
Tested with a few reboots on c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output from __do_page_fault on MIPS has been
pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont
to provide the appropriate markers & restore the expected output.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
With commit e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO") we
started using the ppp value 0b110 to map kernel readonly. But that
facility was only added as part of ISA 2.04. For earlier ISA version
only supported ppp bit value for readonly mapping is 0b011. (This
implies both user and kernel get mapped using the same ppp bit value for
readonly mapping.).
Update the code such that for earlier architecture version we use ppp
value 0b011 for readonly mapping. We don't differentiate between power5+
and power5 here and apply the new ppp bits only from power6 (ISA 2.05).
This keep the changes minimal.
This fixes issue with PS3 spu usage reported at
https://lkml.kernel.org/r/rep.1421449714.geoff@infradead.org
Fixes: e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Split irqchip allows pic and ioapic routes to be used without them being
created, which results in NULL access. Check for NULL and avoid it.
(The setup is too racy for a nicer solutions.)
Found by syzkaller:
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: events irqfd_inject
task: ffff88006a06c7c0 task.stack: ffff880068638000
RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221
RSP: 0000:ffff88006863ea20 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e
RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0
R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0
Stack:
ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000
ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082
0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000
Call Trace:
[...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746
[...] __raw_spin_lock include/linux/spinlock_api_smp.h:144
[...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151
[...] spin_lock include/linux/spinlock.h:302
[...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379
[...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52
[...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101
[...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60
[...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096
[...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230
[...] kthread+0x328/0x3e0 kernel/kthread.c:209
[...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 49df6397edfc ("KVM: x86: Split the APIC from the rest of IRQCHIP.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
KVM was using arrays of size KVM_MAX_VCPUS with vcpu_id, but ID can be
bigger that the maximal number of VCPUs, resulting in out-of-bounds
access.
Found by syzkaller:
BUG: KASAN: slab-out-of-bounds in __apic_accept_irq+0xb33/0xb50 at addr [...]
Write of size 1 by task a.out/27101
CPU: 1 PID: 27101 Comm: a.out Not tainted 4.9.0-rc5+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __apic_accept_irq+0xb33/0xb50 arch/x86/kvm/lapic.c:905
[...] kvm_apic_set_irq+0x10e/0x180 arch/x86/kvm/lapic.c:495
[...] kvm_irq_delivery_to_apic+0x732/0xc10 arch/x86/kvm/irq_comm.c:86
[...] ioapic_service+0x41d/0x760 arch/x86/kvm/ioapic.c:360
[...] ioapic_set_irq+0x275/0x6c0 arch/x86/kvm/ioapic.c:222
[...] kvm_ioapic_inject_all arch/x86/kvm/ioapic.c:235
[...] kvm_set_ioapic+0x223/0x310 arch/x86/kvm/ioapic.c:670
[...] kvm_vm_ioctl_set_irqchip arch/x86/kvm/x86.c:3668
[...] kvm_arch_vm_ioctl+0x1a08/0x23c0 arch/x86/kvm/x86.c:3999
[...] kvm_vm_ioctl+0x1fa/0x1a70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3099
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: af1bae5497b9 ("KVM: x86: bump KVM_MAX_VCPU_ID to 1023")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
em_jmp_far and em_ret_far assumed that setting IP can only fail in 64
bit mode, but syzkaller proved otherwise (and SDM agrees).
Code segment was restored upon failure, but it was left uninitialized
outside of long mode, which could lead to a leak of host kernel stack.
We could have fixed that by always saving and restoring the CS, but we
take a simpler approach and just break any guest that manages to fail
as the error recovery is error-prone and modern CPUs don't need emulator
for this.
Found by syzkaller:
WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480
Kernel panic - not syncing: panic_on_warn set ...
CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __dump_stack lib/dump_stack.c:15
[...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[...] panic+0x1b7/0x3a3 kernel/panic.c:179
[...] __warn+0x1c4/0x1e0 kernel/panic.c:542
[...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
[...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217
[...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227
[...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294
[...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545
[...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116
[...] complete_emulated_io arch/x86/kvm/x86.c:6870
[...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934
[...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978
[...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557
[...] vfs_ioctl fs/ioctl.c:43
[...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
[...] SYSC_ioctl fs/ioctl.c:694
[...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
[...] entry_SYSCALL_64_fastpath+0x1f/0xc2
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Cluster xAPIC delivery incorrectly assumed that dest_id <= 0xff.
With enabled KVM_X2APIC_API_USE_32BIT_IDS in KVM_CAP_X2APIC_API, a
userspace can send an interrupt with dest_id that results in
out-of-bounds access.
Found by syzkaller:
BUG: KASAN: slab-out-of-bounds in kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 at addr ffff88003d9ca750
Read of size 8 by task syz-executor/22923
CPU: 0 PID: 22923 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[...]
Call Trace:
[...] __dump_stack lib/dump_stack.c:15
[...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[...] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
[...] print_address_description mm/kasan/report.c:194
[...] kasan_report_error mm/kasan/report.c:283
[...] kasan_report+0x231/0x500 mm/kasan/report.c:303
[...] __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:329
[...] kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 arch/x86/kvm/lapic.c:824
[...] kvm_irq_delivery_to_apic+0x132/0x9a0 arch/x86/kvm/irq_comm.c:72
[...] kvm_set_msi+0x111/0x160 arch/x86/kvm/irq_comm.c:157
[...] kvm_send_userspace_msi+0x201/0x280 arch/x86/kvm/../../../virt/kvm/irqchip.c:74
[...] kvm_vm_ioctl+0xba5/0x1670 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3015
[...] vfs_ioctl fs/ioctl.c:43
[...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
[...] SYSC_ioctl fs/ioctl.c:694
[...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
[...] entry_SYSCALL_64_fastpath+0x1f/0xc2
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: e45115b62f9a ("KVM: x86: use physical LAPIC array for logical x2APIC")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Since MIPSr6 the Wired register is split into 2 fields, with the upper
16 bits of the register indicating a limit on the value that the wired
entry count in the bottom 16 bits of the register can take. This means
that simply reading the wired register doesn't get us a valid TLB entry
index any longer, and we instead need to retrieve only the lower 16 bits
of the register. Introduce a new num_wired_entries() function which does
this on MIPSr6 or higher and simply returns the value of the wired
register on older architecture revisions, and make use of it when
reading the number of wired entries.
Since commit e710d6668309 ("MIPS: tlb-r4k: If there are wired entries,
don't use TLBINVF") we have been using a non-zero number of wired
entries to determine whether we should avoid use of the tlbinvf
instruction (which would invalidate wired entries) and instead loop over
TLB entries in local_flush_tlb_all(). This loop begins with the number
of wired entries, or before this patch some large bogus TLB index on
MIPSr6 systems. Thus since the aforementioned commit some MIPSr6 systems
with FTLBs have been prone to leaving stale address translations in the
FTLB & crashing in various weird & wonderful ways when we later observe
the wrong memory.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14557/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When configured with CONFIG_PPC_EARLY_DEBUG_OPAL=y the kernel expects
the OPAL entry and base addresses to be passed in r8 and r9
respectively. Currently the wrapper does not attempt to restore these
values before entering the decompressed kernel which causes the kernel
to branch into whatever happens to be in r9 when doing a write to the
OPAL console in early boot.
This patch adds a platform_ops hook that can be used to branch into the
new kernel. The OPAL console driver patches this at runtime so that if
the console is used it will be restored just prior to entering the
kernel.
Fixes: 656ad58ef19e ("powerpc/boot: Add OPAL console to epapr wrappers")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
'm_io' is stored in 6 bits so it's a number in the 0-63 range. Static
analysis tools complain that 1 << 63 will wrap so I have changed it to
1ULL << m_io.
This code is over three years old so presumably the bug doesn't happen
very frequently in real life or someone would have complained by now.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Fixes: b15cc4a12bed ("x86, uv, uv3: Update x2apic Support for SGI UV3")
Link: http://lkml.kernel.org/r/20161123221908.GA23997@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
90954e7b9407 ("x86/coredump: Use pr_reg size, rather that TIF_IA32 flag")
changed the coredumping code to construct the elf coredump file according
to register set size - and that's good: if binary crashes with 32-bit code
selector, generate 32-bit ELF core, otherwise - 64-bit core.
That was made for restoring 32-bit applications on x86_64: we want
32-bit application after restore to generate 32-bit ELF dump on crash.
All was quite good and recently I started reworking 32-bit applications
dumping part of CRIU: now it has two parasites (32 and 64) for seizing
compat/native tasks, after rework it'll have one parasite, working in
64-bit mode, to which 32-bit prologue long-jumps during infection.
And while it has worked for my work machine, in VM with
!CONFIG_X86_X32_ABI during reworking I faced that segfault in 32-bit
binary, that has long-jumped to 64-bit mode results in dereference
of garbage:
32-victim[19266]: segfault at f775ef65 ip 00000000f775ef65 sp 00000000f776aa50 error 14
BUG: unable to handle kernel paging request at ffffffffffffffff
IP: [<ffffffff81332ce0>] strlen+0x0/0x20
[...]
Call Trace:
[] elf_core_dump+0x11a9/0x1480
[] do_coredump+0xa6b/0xe60
[] get_signal+0x1a8/0x5c0
[] do_signal+0x23/0x660
[] exit_to_usermode_loop+0x34/0x65
[] prepare_exit_to_usermode+0x2f/0x40
[] retint_user+0x8/0x10
That's because we have 64-bit registers set (with according total size)
and we're writing it to elf_thread_core_info which has smaller size
on !CONFIG_X86_X32_ABI. That lead to overwriting ELF notes part.
Tested on 32-, 64-bit ELF crashes and on 32-bit binaries that have
jumped with 64-bit code selector - all is readable with gdb.
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 90954e7b9407 ("x86/coredump: Use pr_reg size, rather that TIF_IA32 flag")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Linus Torvalds
Hauke Mehrtens
Luuk Paulussen
Helge Deller
Roger Shimizu
Stefan Agner
Jorik Jonker
John David Anglin
Peter Zijlstra (Intel)
Piotr Luc
Sudeep Holla
Nicholas Piggin
Andrew Donnellan
Jeremy Linton
Yuriy Kolerov
Benjamin Herrenschmidt
Vineet Gupta
Ben Hutchings
Josh Poimboeuf
Peter Foley
Borislav Petkov
Arnd Bergmann
Matt Redfearn
Aneesh Kumar K.V
Radim Krčmář
Paul Burton
Oliver O'Halloran
Dan Carpenter
Dmitry Safonov