| Age | Commit message (Collapse) | Author |
|---|
|
Change the canonical, definitive place to send patches to
the new yocto-patches@lists.yoctoproject.org list.
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
|
|
Signed-off-by: Amber Elliot <amber.n.elliot@intel.com>
Signed-off-by: Paul Eggleton <bluelightning@bluelightning.org>
|
|
If the database contains task logs that are over the default max packet
size for MariaDB, then attempting to dump the database will fail, but it
won't be immediately obvious that that has happened - the gzipped sql
file will simply be truncated and have an error in it. To fix the
underlying issue, add an option to the example command for database
backup to increase the max packet size to 512MB. (Restoring the database
doesn't seem to suffer the same issue).
In future we should probably look at writing a script to do this and
in it properly check the return of mysqldump so that any problems get
noticed immediately.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Make it a bit easier for the user to back up and restore the database.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This is now be practical to use for updating as well as the initial
import. Additionally the user doesn't need to be using the debug
option by default so drop it from the example command.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
(The templates have of course been modified.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Change the focus to really be on the docker-based setup:
* Integrate docker/README into the main README
* Move all documentation of the standalone setup to README.devel
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Adding setup script for docker containers. The script will edit all
necessary configuration files, build and launch all containers, and
do the initial database setup - including populating the database
with data supplied by the user.
Changed docker/README to reflect new setup instructions.
Signed-off-by: Amber Elliot <amber.n.elliot@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This makes deployment (and updates) much easier. You still need to
follow some setup instructions in the docker/README file, but the number
of steps is reduced and most commands simplified.
Thanks to Konrad Scherer <Konrad.Scherer@windriver.com> for suggesting
this (although the docker-compose.yml here was written from scratch).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The RRS code uses this but we weren't mentioning that here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We were using uitablefilter.js to provide live filtering of table rows
based upon a search field value, but it turns out this module really
isn't necessary - we can accomplish the same thing using simple jQuery
code. While we're at it, enable the search field on the layers list page
to work in conjunction with with the drop-down layer type selection, fix
pasting into the search field and refreshing with a search specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
nvd3 and its python/django wrappers appear to be no longer actively
maintained, and at least the wrappers were a bit clunky to use. Looking
around for a suitable replacement, Chart.js seems capable, has no
additional dependencies and is fairly simple to use. As a bonus we get
to drop a few Python dependencies from our list.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Use a more modern version of Bootstrap and take the opportunity to
upgrade jQuery to the latest version at the same time. This provides
better browser compatibility, moves to MIT license, allows us to make
the site more responsive for different devices in future, and provides
theming capabilities for custom installs among other improvements.
(I chose to upgrade to v3 for now rather than straight to v4 as it was
easier to do this gradually.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The Docker-based setup method is preferred for production, so rearrange
things a little to make it a bit easier to follow.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
A while ago I was trying to help someone new get started with a
development setup for the layer index and it occurred to me that the
virtualenv-based environment I am using for development isn't actually
covered in the documentation, so I wrote something quick for them but
didn't do anything further with it until now. Here it is in more fleshed
out form for the README.
Also clarify the python requirements for the update script a little bit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Since Django 1.8 is now out of support, and we've cleaned up the issues,
bump the Django requirement to 1.11 and update other dependencies at the
same time.
Fixes [YOCTO #12696] (requires preceding commits)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Update the minor version of Django, and replace the list of dependencies
with a pointer to requirements.txt since there's not much point
maintaining that in two places (and the README wasn't complete anyway).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This patch adds asynchronous task execution using a Celery backend
and RabbitMQ task queue, so that the layer submission process to
proceed even in the event that sending the notification email fails,
and establishing an asynchronous execution mechanism that we can use
in the future e.g. for triggering parse operations from the web UI.
This pertains to bug 11197:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=11197
It updates the README to reflect the installation and configuration
of a basic RabbitMQ setup, adds a 'tasks.py' file to contain task
definitions, updates the 'edit_layer_view' function to send
emails to administrators about new and updated layers asynchronously,
modifies the 'settings.py' to include a default configuration
for a RabbitMQ connection, and updates the Dockerfile to start a Celery
worker alongside the Gunicorn daemon.
Fixes [YOCTO #11197].
Signed-off-by: Diana Thayer <garbados@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This wasn't documented anywhere so I've added it here. I'm not sure
it'll get used outside of the live OE index but it's at least useful for
anyone else who needs to debug it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We might as well show the latest tested point release.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
With Django 1.8 you don't need to use syncdb since migrate does all of
the database structure setup (and in fact in 1.9 it has been removed -
we don't support that version yet but it's good to avoid that issue in
future). The only other thing that syncdb did was to create a superuser,
and there is now a specific command to do that. Since you do need to
actually log in as part of some of the later steps, we now tell the user
explicitly to run that in the first step.
Additionally, add a section about what to do when upgrading - normally
this is straightforward, but if you're upgrading from prior to the
Django 1.8 move then you need to fake the initial migration or it'll
fail (since the structure is already present).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
These cannot be used with Django 1.8 and thus we need to remove them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you're in a virtualenv it doesn't make a difference, but outside of
one it will.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Add a model to support setting a python command and virtualenv per
branch, which allows you to parse master with python3 and krogoth with
python2 for example.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We need to be able to support Python 3 so that we can parse master of
OE-Core with bitbake (which now requires it). This now means the
interface itself and the update script require Python 3.4+.
Part of the implementation for [YOCTO #9704].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
I'd like to be upgrading to 1.8 but that causes problems with South, and
we're not quite ready to dispense with our existing migrations yet.
Part of the implementation for [YOCTO #9620].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Allow updating multiple branches, and if no branches are specified,
update all branches that have a new "updates_enabled" flag field set to
True. This avoids the need to have a separate shell script which runs
update.py for each branch (and thus has hardcoded knowledge of each
active branch in the index, i.e. it needs to be kept up-to-date in
addition to the database.)
The migration will default updates_enabled to True for all branches so
if you wish to take advantage of this functionality, the flag will need
to be set to False for any branches that shouldn't be updated.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Replicate production setup in Docker containers
[YOCTO #7575]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We add the corsheaders application in order to
enable the CORS policy for the read-only REST API.
This is needed to allow AJAX queries to the layerindex
application from a browser environment.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
|
|
This patch enables a read-only REST API for the layerindex
application using Django REST Framework.
The objects of types Branch, LayerBranch and LayerItem are
exposed to queries so that the layerindex application can
function as a Layer Source in Toaster.
The library dependencies are documented in the requirements.txt
file.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Update d3/nvd3 js files in the process, but hold off on nv.d3.css for
now because the latest version breaks the formatting/fading on tooltips.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This allows specifying the site title in the database, instead of hardcoding
it in the template. Just change it to something other than "example.com" to
apply your own title.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Since South was added this is an additional mandatory step for new
installations.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
* There is no longer a frontpage template
* BitBake requires Python 2.7.3 so we might as well state it here also
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Add a script for doing a one-time import of OE-Classic recipe
information, so comparisons against OE-Core can be performed; this
is stored using a new ClassicRecipe model supporting additional fields
for tracking migration status. The migration status fields can be
updated as well as viewed and summarised in graph format.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Give the user a friendly introduction instead of plunging them straight
into the layers list. (Of course if people want to link directly to the
layers list they still can.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
* Add tested versions
* Web server only needed for production
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This should allow the templates to be found and swapped out more easily.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Change the data structure to support multiple branches. At the top level
there is a set list of Branch objects, and then a LayerBranch object
between each layer and the maintainers, dependencies, recipes and
machines, so that the set of each can be different per branch. The
branch is a session option, and can be selected via a drop-down that is
shown for all pages.
Additionally, with this change we avoid the need to run the update
script within a build environment set up with oe-init-build-env - since
we need a specific version of BitBake per branch we now use our own copy
of BitBake which is fetched by the script itself. The update script will
need to be called multiple times however - once per branch.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
This should prevent spamming even though this is less likely with this
kind of site.
The CAPTCHA does not show when editing, only submitting, and is also not
shown for authenticated users.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
Tim Orling
Amber Elliot
Paul Eggleton
Diana Thayer
Alex Franco
Alexandru DAMIAN