{ "manual_bsp-hw_20191217135116": { "configuration": { "IMAGE_BASENAME": "core-image-sato-sdk", "LAYERS": { "meta": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-poky": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-yocto-bsp": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20191217135116", "TESTSERIES": "beaglebone", "TEST_MODULE": "bsp-hw", "TEST_TYPE": "manual" }, "result": { "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Boot_from_JFFS2_image": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": { "status": "PASSED" }, "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Check_if_target_can_support_EEPROM": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": { "status": "PASSED" }, "bsps-hw.bsps-hw.Graphics_-_ABAT": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.X_server_can_start_up_with_runlevel_5_boot": { "status": "PASSED" }, "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.boot_and_install_from_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.boot_from_runlevel_3": { "status": "PASSED" }, "bsps-hw.bsps-hw.boot_from_runlevel_5": { "status": "PASSED" }, "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": { "status": "PASSED" }, "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": { "status": "PASSED" }, "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": { "status": "PASSED" }, "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": { "status": "PASSED" }, "bsps-hw.bsps-hw.live_boot_from_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.shutdown_system": { "status": "PASSED" }, "bsps-hw.bsps-hw.standby": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": { "status": "PASSED" }, "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": { "status": "SKIPPED" } } }, "runtime_core-image-sato-sdk_beaglebone-yocto_20191216020258": { "configuration": { "DISTRO": "poky", "HOST_DISTRO": "ubuntu-16.04", "IMAGE_BASENAME": "core-image-sato-sdk", "IMAGE_PKGTYPE": "rpm", "LAYERS": { "meta": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-poky": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-yocto-bsp": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20191216020258", "TESTSERIES": "beaglebone", "TEST_TYPE": "runtime" }, "result": { "apt.AptRepoTest.test_apt_install_from_repo": { "log": "Test requires apt to be installed", "status": "SKIPPED" }, "buildcpio.BuildCpioTest.test_cpio": { "status": "PASSED" }, "buildgalculator.GalculatorTest.test_galculator": { "log": "Test requires gtk+3 to be installed", "status": "SKIPPED" }, "buildlzip.BuildLzipTest.test_lzip": { "status": "PASSED" }, "connman.ConnmanTest.test_connmand_help": { "status": "PASSED" }, "connman.ConnmanTest.test_connmand_running": { "status": "PASSED" }, "date.DateTest.test_date": { "status": "PASSED" }, "df.DfTest.test_df": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_help": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_history": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_info": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_search": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_version": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_exclude": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_dependency": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_disk": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_http": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { "log": "Test run when enable usrmege", "status": "SKIPPED" }, "dnf.DnfRepoTest.test_dnf_makecache": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_reinstall": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_repoinfo": { "status": "PASSED" }, "gcc.GccCompileTest.test_gcc_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_gpp2_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_gpp_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_make": { "status": "PASSED" }, "gi.GObjectIntrospectionTest.test_python": { "status": "PASSED" }, "kernelmodule.KernelModuleTest.test_kernel_module": { "status": "PASSED" }, "ldd.LddTest.test_ldd": { "status": "PASSED" }, "logrotate.LogrotateTest.test_1_logrotate_setup": { "status": "PASSED" }, "logrotate.LogrotateTest.test_2_logrotate": { "status": "PASSED" }, "oe_syslog.SyslogTest.test_syslog_running": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_logger": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_restart": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { "status": "PASSED" }, "opkg.OpkgRepoTest.test_opkg_install_from_repo": { "log": "Test requires opkg to be installed", "status": "SKIPPED" }, "pam.PamBasicTest.test_pam": { "log": "Test requires pam to be in DISTRO_FEATURES", "status": "SKIPPED" }, "parselogs.ParseLogsTest.test_parselogs": { "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 6 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 7.013175] usb 1-1.4: device not accepting address 6, error -71\n***********************\n[ 6.039641] usb 1-1.4: USB disconnect, device number 3\n[ 6.228922] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.423236] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 6.602948] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 6.702677] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 6.746580] sd 0:0:0:0: [sda] Write Protect is off\n[ 6.750139] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 6.806805] sd 0:0:0:0: [sda] No Caching mode page found\n[ 6.863367] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 6.983283] sda: sda1\n[ 7.013175] usb 1-1.4: device not accepting address 6, error -71\n[ 7.033700] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.463265] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 7.666341] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2003.0003/input/input2\n[ 7.933670] hid-generic 0003:413C:2003.0003: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.4/input0\n[ 9.305850] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 9.335801] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 9.802819] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)\n[ 14.758226] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0)\n[ 14.883968] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)\n[ 17.043832] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off\n\n***********************\nCentral error: [ 0.423540] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107258] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108622] xor: measuring software checksum speed\n[ 0.199122] arm4regs : 1221.600 MB/sec\n[ 0.299068] 8regs : 905.200 MB/sec\n[ 0.399067] 32regs : 1175.200 MB/sec\n[ 0.399075] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399090] pinctrl core: initialized pinctrl subsystem\n[ 0.400259] NET: Registered protocol family 16\n[ 0.402643] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423540] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450861] cpuidle: using governor ladder\n[ 0.450896] cpuidle: using governor menu\n[ 0.467273] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468307] Serial: AMBA PL011 UART driver\n[ 0.649453] raid6: int32x8 gen() 180 MB/s\n[ 0.819723] raid6: int32x8 xor() 122 MB/s\n[ 0.989231] raid6: int32x4 gen() 209 MB/s\n[ 1.159311] raid6: int32x4 xor() 152 MB/s\n[ 1.329290] raid6: int32x2 gen() 272 MB/s\n[ 1.499081] raid6: int32x2 xor() 191 MB/s\n\n***********************\nCentral error: [ 3.201846] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063666] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067966] usbcore: registered new interface driver usb-storage\n[ 3.075571] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095069] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123361] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128017] i2c /dev entries driver\n[ 3.131387] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139055] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146633] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201846] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.211926] usbcore: registered new interface driver usbhid\n[ 3.216398] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223202] usbhid: USB HID core driver\n[ 3.227014] oprofile: using arm/armv7\n[ 3.229629] u32 classifier\n[ 3.231108] Actions configured\n[ 3.233440] mmc0: new high speed SDHC card at address 1234\n[ 3.238558] NET: Registered protocol family 10\n[ 3.243561] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248510] Segment Routing with IPv6\n\n***********************\nLog: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 7.013175] usb 1-1.4: device not accepting address 6, error -71\n***********************\n[ 6.039641] usb 1-1.4: USB disconnect, device number 3\n[ 6.228922] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.423236] usb 1-1.4: new low-speed USB device number 6 using musb-hdrc\n[ 6.602948] scsi 0:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2\n[ 6.702677] sd 0:0:0:0: [sda] 3905407 512-byte logical blocks: (2.00 GB/1.86 GiB)\n[ 6.746580] sd 0:0:0:0: [sda] Write Protect is off\n[ 6.750139] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08\n[ 6.806805] sd 0:0:0:0: [sda] No Caching mode page found\n[ 6.863367] sd 0:0:0:0: [sda] Assuming drive cache: write through\n[ 6.983283] sda: sda1\n[ 7.013175] usb 1-1.4: device not accepting address 6, error -71\n[ 7.033700] sd 0:0:0:0: [sda] Attached SCSI removable disk\n[ 7.463265] usb 1-1.4: new low-speed USB device number 7 using musb-hdrc\n[ 7.666341] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2003.0003/input/input2\n[ 7.933670] hid-generic 0003:413C:2003.0003: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.4/input0\n[ 9.305850] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem\n[ 9.335801] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)\n[ 9.802819] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)\n\n***********************\nCentral error: [ 0.423540] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107258] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108622] xor: measuring software checksum speed\n[ 0.199122] arm4regs : 1221.600 MB/sec\n[ 0.299068] 8regs : 905.200 MB/sec\n[ 0.399067] 32regs : 1175.200 MB/sec\n[ 0.399075] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399090] pinctrl core: initialized pinctrl subsystem\n[ 0.400259] NET: Registered protocol family 16\n[ 0.402643] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423540] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450861] cpuidle: using governor ladder\n[ 0.450896] cpuidle: using governor menu\n[ 0.467273] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468307] Serial: AMBA PL011 UART driver\n[ 0.649453] raid6: int32x8 gen() 180 MB/s\n[ 0.819723] raid6: int32x8 xor() 122 MB/s\n[ 0.989231] raid6: int32x4 gen() 209 MB/s\n[ 1.159311] raid6: int32x4 xor() 152 MB/s\n[ 1.329290] raid6: int32x2 gen() 272 MB/s\n[ 1.499081] raid6: int32x2 xor() 191 MB/s\n\n***********************\nCentral error: [ 3.201846] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063666] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067966] usbcore: registered new interface driver usb-storage\n[ 3.075571] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095069] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123361] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128017] i2c /dev entries driver\n[ 3.131387] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139055] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146633] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201846] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.211926] usbcore: registered new interface driver usbhid\n[ 3.216398] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223202] usbhid: USB HID core driver\n[ 3.227014] oprofile: using arm/armv7\n[ 3.229629] u32 classifier\n[ 3.231108] Actions configured\n[ 3.233440] mmc0: new high speed SDHC card at address 1234\n[ 3.238558] NET: Registered protocol family 10\n[ 3.243561] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248510] Segment Routing with IPv6\n\n***********************\n6 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", "status": "FAILED" }, "perl.PerlTest.test_perl_works": { "status": "PASSED" }, "ping.PingTest.test_ping": { "status": "PASSED" }, "ptest.PtestRunnerTest.test_ptestrunner": { "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "python.PythonTest.test_python3": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_help": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query_nonroot": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_install": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_remove": { "status": "PASSED" }, "scp.ScpTest.test_scp_file": { "status": "PASSED" }, "ssh.SSHTest.test_ssh": { "status": "PASSED" }, "stap.StapTest.test_stap": { "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_basic": { "log": "systemd is not the init manager for this image", "status": "SKIPPED" }, "systemd.SystemdBasicTests.test_systemd_failed": { "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdBasicTests.test_systemd_list": { "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdJournalTests.test_systemd_boot_time": { "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdJournalTests.test_systemd_journal": { "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable": { "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": { "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_status": { "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_stop_start": { "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", "status": "SKIPPED" }, "xorg.XorgTest.test_xorg_running": { "status": "PASSED" } } }, "runtime_core-image-sato-sdk_beaglebone-yocto_20191216070627": { "configuration": { "DISTRO": "poky-altcfg", "HOST_DISTRO": "ubuntu-16.04", "IMAGE_BASENAME": "core-image-sato-sdk", "IMAGE_PKGTYPE": "rpm", "LAYERS": { "meta": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-poky": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 }, "meta-yocto-bsp": { "branch": "master", "commit": "1abffc542a0571f0d1512b92c1a59d138cf3ea6a", "commit_count": 56511 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20191216070627", "TESTSERIES": "beaglebone", "TEST_TYPE": "runtime" }, "result": { "apt.AptRepoTest.test_apt_install_from_repo": { "log": "Test requires apt to be installed", "status": "SKIPPED" }, "buildcpio.BuildCpioTest.test_cpio": { "status": "PASSED" }, "buildgalculator.GalculatorTest.test_galculator": { "log": "Test requires gtk+3 to be installed", "status": "SKIPPED" }, "buildlzip.BuildLzipTest.test_lzip": { "status": "PASSED" }, "connman.ConnmanTest.test_connmand_help": { "status": "PASSED" }, "connman.ConnmanTest.test_connmand_running": { "status": "PASSED" }, "date.DateTest.test_date": { "status": "PASSED" }, "df.DfTest.test_df": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_help": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_history": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_info": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_search": { "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_version": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_exclude": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_dependency": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_disk": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_http": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { "log": "Test run when enable usrmege", "status": "SKIPPED" }, "dnf.DnfRepoTest.test_dnf_makecache": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_reinstall": { "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_repoinfo": { "status": "PASSED" }, "gcc.GccCompileTest.test_gcc_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_gpp2_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_gpp_compile": { "status": "PASSED" }, "gcc.GccCompileTest.test_make": { "status": "PASSED" }, "gi.GObjectIntrospectionTest.test_python": { "status": "PASSED" }, "kernelmodule.KernelModuleTest.test_kernel_module": { "status": "PASSED" }, "ldd.LddTest.test_ldd": { "status": "PASSED" }, "logrotate.LogrotateTest.test_1_logrotate_setup": { "status": "PASSED" }, "logrotate.LogrotateTest.test_2_logrotate": { "status": "PASSED" }, "oe_syslog.SyslogTest.test_syslog_running": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_logger": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_restart": { "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { "log": "Not appropiate for systemd image", "status": "SKIPPED" }, "opkg.OpkgRepoTest.test_opkg_install_from_repo": { "log": "Test requires opkg to be installed", "status": "SKIPPED" }, "pam.PamBasicTest.test_pam": { "status": "PASSED" }, "parselogs.ParseLogsTest.test_parselogs": { "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 3.201904] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063667] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067966] usbcore: registered new interface driver usb-storage\n[ 3.075531] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095066] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123336] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128002] i2c /dev entries driver\n[ 3.131380] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139055] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146634] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201904] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.211994] usbcore: registered new interface driver usbhid\n[ 3.216467] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223273] usbhid: USB HID core driver\n[ 3.227070] oprofile: using arm/armv7\n[ 3.229683] u32 classifier\n[ 3.231167] Actions configured\n[ 3.233502] mmc0: new high speed SDHC card at address 1234\n[ 3.238623] NET: Registered protocol family 10\n[ 3.243611] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248544] Segment Routing with IPv6\n\n***********************\nCentral error: [ 0.423365] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107283] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107306] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108668] xor: measuring software checksum speed\n[ 0.199119] arm4regs : 1221.600 MB/sec\n[ 0.299066] 8regs : 905.200 MB/sec\n[ 0.399065] 32regs : 1175.200 MB/sec\n[ 0.399072] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399088] pinctrl core: initialized pinctrl subsystem\n[ 0.400267] NET: Registered protocol family 16\n[ 0.402646] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423365] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450696] cpuidle: using governor ladder\n[ 0.450731] cpuidle: using governor menu\n[ 0.467104] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468144] Serial: AMBA PL011 UART driver\n[ 0.649438] raid6: int32x8 gen() 180 MB/s\n[ 0.819702] raid6: int32x8 xor() 122 MB/s\n[ 0.989197] raid6: int32x4 gen() 209 MB/s\n[ 1.159313] raid6: int32x4 xor() 152 MB/s\n[ 1.329287] raid6: int32x2 gen() 272 MB/s\n[ 1.499076] raid6: int32x2 xor() 191 MB/s\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", "status": "FAILED" }, "perl.PerlTest.test_perl_works": { "status": "PASSED" }, "ping.PingTest.test_ping": { "status": "PASSED" }, "ptest.PtestRunnerTest.test_ptestrunner": { "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "python.PythonTest.test_python3": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_help": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query": { "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query_nonroot": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_install": { "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_remove": { "status": "PASSED" }, "scp.ScpTest.test_scp_file": { "status": "PASSED" }, "ssh.SSHTest.test_ssh": { "status": "PASSED" }, "stap.StapTest.test_stap": { "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_basic": { "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_failed": { "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_list": { "status": "PASSED" }, "systemd.SystemdJournalTests.test_systemd_boot_time": { "status": "PASSED" }, "systemd.SystemdJournalTests.test_systemd_journal": { "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable": { "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": { "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_status": { "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_stop_start": { "status": "PASSED" }, "xorg.XorgTest.test_xorg_running": { "status": "PASSED" } } } }