{ "manual_bsp-hw_20200612153249": { "configuration": { "IMAGE_BASENAME": "core-image-sato-sdk", "LAYERS": { "meta": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-poky": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-yocto-bsp": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20200612153249", "TEST_MODULE": "bsp-hw", "TEST_TYPE": "manual" }, "result": { "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": { "status": "PASSED" }, "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": { "status": "PASSED" }, "bsps-hw.bsps-hw.Graphics_-_ABAT": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.X_server_can_start_up_with_runlevel_5_boot": { "status": "PASSED" }, "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.boot_and_install_from_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.boot_from_runlevel_3": { "status": "PASSED" }, "bsps-hw.bsps-hw.boot_from_runlevel_5": { "status": "PASSED" }, "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": { "status": "PASSED" }, "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": { "status": "PASSED" }, "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": { "status": "PASSED" }, "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": { "status": "PASSED" }, "bsps-hw.bsps-hw.live_boot_from_USB": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.shutdown_system": { "status": "PASSED" }, "bsps-hw.bsps-hw.standby": { "status": "SKIPPED" }, "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": { "status": "PASSED" }, "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": { "status": "SKIPPED" } } }, "runtime_core-image-sato-sdk_beaglebone-yocto_20200612051257": { "configuration": { "DISTRO": "poky", "HOST_DISTRO": "ubuntu-18.04", "IMAGE_BASENAME": "core-image-sato-sdk", "IMAGE_PKGTYPE": "rpm", "LAYERS": { "meta": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-poky": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-yocto-bsp": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20200612051257", "TEST_TYPE": "runtime" }, "result": { "apt.AptRepoTest.test_apt_install_from_repo": { "duration": 0.00034880638122558594, "log": "Test requires apt to be installed", "status": "SKIPPED" }, "buildcpio.BuildCpioTest.test_cpio": { "duration": 479.3230276107788, "status": "PASSED" }, "buildgalculator.GalculatorTest.test_galculator": { "duration": 0.0006535053253173828, "log": "Test requires gtk+3 to be installed", "status": "SKIPPED" }, "buildlzip.BuildLzipTest.test_lzip": { "duration": 109.0334792137146, "status": "PASSED" }, "connman.ConnmanTest.test_connmand_help": { "duration": 0.2768673896789551, "status": "PASSED" }, "connman.ConnmanTest.test_connmand_running": { "duration": 0.31919097900390625, "status": "PASSED" }, "date.DateTest.test_date": { "duration": 0.963238000869751, "status": "PASSED" }, "df.DfTest.test_df": { "duration": 0.2760891914367676, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_help": { "duration": 7.983049631118774, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_history": { "duration": 6.360068321228027, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_info": { "duration": 4.331554889678955, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_search": { "duration": 4.298369884490967, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_version": { "duration": 4.037590503692627, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_exclude": { "duration": 81.47794270515442, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install": { "duration": 16.845585584640503, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_dependency": { "duration": 16.32318687438965, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_disk": { "duration": 20.922754049301147, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_http": { "duration": 16.2032470703125, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot": { "duration": 49.388126850128174, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { "duration": 0.0006906986236572266, "log": "Test run when enable usrmege", "status": "SKIPPED" }, "dnf.DnfRepoTest.test_dnf_makecache": { "duration": 3.8113913536071777, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_reinstall": { "duration": 5.774104118347168, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_repoinfo": { "duration": 4.260352373123169, "status": "PASSED" }, "gcc.GccCompileTest.test_gcc_compile": { "duration": 2.4356930255889893, "status": "PASSED" }, "gcc.GccCompileTest.test_gpp2_compile": { "duration": 2.7498972415924072, "status": "PASSED" }, "gcc.GccCompileTest.test_gpp_compile": { "duration": 3.2906382083892822, "status": "PASSED" }, "gcc.GccCompileTest.test_make": { "duration": 2.0093867778778076, "status": "PASSED" }, "gi.GObjectIntrospectionTest.test_python": { "duration": 1.6014800071716309, "status": "PASSED" }, "kernelmodule.KernelModuleTest.test_kernel_module": { "duration": 169.5774552822113, "status": "PASSED" }, "ldd.LddTest.test_ldd": { "duration": 0.798799991607666, "status": "PASSED" }, "logrotate.LogrotateTest.test_logrotate_newlog": { "duration": 1.4501667022705078, "status": "PASSED" }, "logrotate.LogrotateTest.test_logrotate_wtmp": { "duration": 1.4606361389160156, "status": "PASSED" }, "oe_syslog.SyslogTest.test_syslog_running": { "duration": 0.28035974502563477, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_logger": { "duration": 1.492924690246582, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_restart": { "duration": 2.4458255767822266, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { "duration": 5.611278295516968, "status": "PASSED" }, "opkg.OpkgRepoTest.test_opkg_install_from_repo": { "duration": 0.0005621910095214844, "log": "Test requires opkg to be installed", "status": "SKIPPED" }, "pam.PamBasicTest.test_pam": { "duration": 0.0005238056182861328, "log": "Test requires pam to be in DISTRO_FEATURES", "status": "SKIPPED" }, "parselogs.ParseLogsTest.test_parselogs": { "duration": 4.9843549728393555, "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/dunfell/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/dunfell/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 375, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 12 != 0 : Log: /buildarea4/yzhao1/yocto/dunfell/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.428507] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.106889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.106914] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108360] xor: measuring software checksum speed\n[ 0.199109] arm4regs : 1218.800 MB/sec\n[ 0.299047] 8regs : 905.200 MB/sec\n[ 0.399049] 32regs : 1172.400 MB/sec\n[ 0.399057] xor: using function: arm4regs (1218.800 MB/sec)\n[ 0.399074] pinctrl core: initialized pinctrl subsystem\n[ 0.400328] NET: Registered protocol family 16\n[ 0.402914] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428507] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430832] cpuidle: using governor ladder\n[ 0.430870] cpuidle: using governor menu\n[ 0.448300] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449514] Serial: AMBA PL011 UART driver\n[ 0.640169] raid6: int32x8 gen() 151 MB/s\n[ 0.809182] raid6: int32x8 xor() 102 MB/s\n[ 0.979224] raid6: int32x4 gen() 159 MB/s\n[ 1.149224] raid6: int32x4 xor() 113 MB/s\n[ 1.319104] raid6: int32x2 gen() 270 MB/s\n[ 1.489214] raid6: int32x2 xor() 190 MB/s\n\n***********************\nCentral error: [ 3.294014] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.149009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.154466] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.158764] usbcore: registered new interface driver usb-storage\n[ 3.166407] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.185905] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.214795] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.219468] i2c /dev entries driver\n[ 3.222913] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.230702] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.238291] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.294014] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.304820] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.312686] usbcore: registered new interface driver usbhid\n[ 3.317307] usbhid: USB HID core driver\n[ 3.320020] mmc0: new high speed SDHC card at address 1234\n[ 3.325440] oprofile: using arm/armv7\n[ 3.328734] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.332087] u32 classifier\n[ 3.333499] input device check on\n[ 3.337422] Actions configured\n[ 3.340492] NET: Registered protocol family 10\n\n***********************\nCentral error: [ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n***********************\n[ 3.856413] Run /sbin/init as init process\n[ 4.213969] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 4.245113] hub 1-1:1.0: USB hub found\n[ 4.248397] hub 1-1:1.0: 7 ports detected\n[ 4.573952] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n\n***********************\nCentral error: [ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n***********************\n[ 4.245113] hub 1-1:1.0: USB hub found\n[ 4.248397] hub 1-1:1.0: 7 ports detected\n[ 4.573952] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n\n***********************\nCentral error: [ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n***********************\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n[ 9.167483] usb-storage 1-1.5:1.0: USB Mass Storage device detected\n[ 9.173067] scsi host0: usb-storage 1-1.5:1.0\n[ 9.197746] usb 1-1.3: USB disconnect, device number 7\n\n***********************\nCentral error: [ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n***********************\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n[ 9.167483] usb-storage 1-1.5:1.0: USB Mass Storage device detected\n[ 9.173067] scsi host0: usb-storage 1-1.5:1.0\n[ 9.197746] usb 1-1.3: USB disconnect, device number 7\n[ 9.553795] usb 1-1.3: new low-speed USB device number 9 using musb-hdrc\n[ 9.822763] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)\n[ 9.984589] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0003/input/input2\n\n***********************\nLog: /buildarea4/yzhao1/yocto/dunfell/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.428507] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.106889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.106914] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108360] xor: measuring software checksum speed\n[ 0.199109] arm4regs : 1218.800 MB/sec\n[ 0.299047] 8regs : 905.200 MB/sec\n[ 0.399049] 32regs : 1172.400 MB/sec\n[ 0.399057] xor: using function: arm4regs (1218.800 MB/sec)\n[ 0.399074] pinctrl core: initialized pinctrl subsystem\n[ 0.400328] NET: Registered protocol family 16\n[ 0.402914] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428507] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430832] cpuidle: using governor ladder\n[ 0.430870] cpuidle: using governor menu\n[ 0.448300] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449514] Serial: AMBA PL011 UART driver\n[ 0.640169] raid6: int32x8 gen() 151 MB/s\n[ 0.809182] raid6: int32x8 xor() 102 MB/s\n[ 0.979224] raid6: int32x4 gen() 159 MB/s\n[ 1.149224] raid6: int32x4 xor() 113 MB/s\n[ 1.319104] raid6: int32x2 gen() 270 MB/s\n[ 1.489214] raid6: int32x2 xor() 190 MB/s\n\n***********************\nCentral error: [ 3.294014] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.149009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.154466] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.158764] usbcore: registered new interface driver usb-storage\n[ 3.166407] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.185905] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.214795] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.219468] i2c /dev entries driver\n[ 3.222913] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.230702] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.238291] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.294014] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.304820] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.312686] usbcore: registered new interface driver usbhid\n[ 3.317307] usbhid: USB HID core driver\n[ 3.320020] mmc0: new high speed SDHC card at address 1234\n[ 3.325440] oprofile: using arm/armv7\n[ 3.328734] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.332087] u32 classifier\n[ 3.333499] input device check on\n[ 3.337422] Actions configured\n[ 3.340492] NET: Registered protocol family 10\n\n***********************\nCentral error: [ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n***********************\n[ 3.856413] Run /sbin/init as init process\n[ 4.213969] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 4.245113] hub 1-1:1.0: USB hub found\n[ 4.248397] hub 1-1:1.0: 7 ports detected\n[ 4.573952] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n\n***********************\nCentral error: [ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n***********************\n[ 4.245113] hub 1-1:1.0: USB hub found\n[ 4.248397] hub 1-1:1.0: 7 ports detected\n[ 4.573952] usb 1-1.1: new low-speed USB device number 3 using musb-hdrc\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n\n***********************\nCentral error: [ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n***********************\n[ 4.712987] input: USB Optical Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461:4D81.0001/input/input0\n[ 4.730353] hid-generic 0003:0461:4D81.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.1/input0\n[ 5.004175] udevd[146]: starting version 3.2.9\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n[ 9.167483] usb-storage 1-1.5:1.0: USB Mass Storage device detected\n[ 9.173067] scsi host0: usb-storage 1-1.5:1.0\n[ 9.197746] usb 1-1.3: USB disconnect, device number 7\n\n***********************\nCentral error: [ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n***********************\n[ 5.033912] usb 1-1.3: new low-speed USB device number 4 using musb-hdrc\n[ 5.101188] udevd[147]: starting eudev-3.2.9\n[ 5.385127] usb 1-1.3: device descriptor read/64, error -71\n[ 5.763517] davinci-mcasp 48038000.mcasp: IRQ common not found\n[ 6.044042] usb 1-1.3: device not accepting address 4, error -71\n[ 6.349330] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok\n[ 6.593979] usb 1-1.3: new low-speed USB device number 5 using musb-hdrc\n[ 7.174063] usb 1-1.3: device not accepting address 5, error -71\n[ 7.178938] usb 1-1-port3: attempt power cycle\n[ 7.893940] usb 1-1.3: new low-speed USB device number 6 using musb-hdrc\n[ 8.353942] usb 1-1.3: device not accepting address 6, error -71\n[ 8.903819] usb 1-1.3: new low-speed USB device number 7 using musb-hdrc\n[ 8.949233] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0002/input/input1\n[ 9.024518] hid-generic 0003:413C:2003.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.3/input0\n[ 9.133789] usb 1-1.5: new high-speed USB device number 8 using musb-hdrc\n[ 9.167483] usb-storage 1-1.5:1.0: USB Mass Storage device detected\n[ 9.173067] scsi host0: usb-storage 1-1.5:1.0\n[ 9.197746] usb 1-1.3: USB disconnect, device number 7\n[ 9.553795] usb 1-1.3: new low-speed USB device number 9 using musb-hdrc\n[ 9.822763] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)\n[ 9.984589] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2003.0003/input/input2\n\n***********************\n12 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", "status": "FAILED" }, "perl.PerlTest.test_perl_works": { "duration": 0.24680805206298828, "status": "PASSED" }, "ping.PingTest.test_ping": { "duration": 0.042691946029663086, "status": "PASSED" }, "ptest.PtestRunnerTest.test_ptestrunner_expectfail": { "duration": 0.0005710124969482422, "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": { "duration": 0.0003800392150878906, "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "python.PythonTest.test_python3": { "duration": 0.47215819358825684, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_help": { "duration": 0.27678894996643066, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query": { "duration": 0.5207610130310059, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query_nonroot": { "duration": 4.722988128662109, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { "duration": 25.39382815361023, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_install": { "duration": 2.1515707969665527, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_remove": { "duration": 0.9518840312957764, "status": "PASSED" }, "scp.ScpTest.test_scp_file": { "duration": 1.38450288772583, "status": "PASSED" }, "ssh.SSHTest.test_ssh": { "duration": 0.4888288974761963, "status": "PASSED" }, "stap.StapTest.test_stap": { "duration": 205.6347496509552, "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_basic": { "duration": 0.0006299018859863281, "log": "systemd is not the init manager for this image", "status": "SKIPPED" }, "systemd.SystemdBasicTests.test_systemd_failed": { "duration": 0.0004780292510986328, "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdBasicTests.test_systemd_list": { "duration": 0.00036406517028808594, "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdJournalTests.test_systemd_boot_time": { "duration": 0.0003840923309326172, "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdJournalTests.test_systemd_journal": { "duration": 0.00034737586975097656, "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable": { "duration": 0.0004856586456298828, "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": { "duration": 0.00036144256591796875, "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_status": { "duration": 0.00035762786865234375, "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_stop_start": { "duration": 0.00033283233642578125, "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", "status": "SKIPPED" }, "weston.WestonTest.test_weston_running": { "duration": 0.0004410743713378906, "log": "Test requires weston to be installed", "status": "SKIPPED" }, "xorg.XorgTest.test_xorg_running": { "duration": 0.5824460983276367, "status": "PASSED" } } }, "runtime_core-image-sato-sdk_beaglebone-yocto_20200612063717": { "configuration": { "DISTRO": "poky-altcfg", "HOST_DISTRO": "ubuntu-18.04", "IMAGE_BASENAME": "core-image-sato-sdk", "IMAGE_PKGTYPE": "rpm", "LAYERS": { "meta": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-poky": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 }, "meta-yocto-bsp": { "branch": "dunfell", "commit": "febbe2944c0c4a04b85fa98fdc261186115954d8", "commit_count": 58008 } }, "MACHINE": "beaglebone-yocto", "STARTTIME": "20200612063717", "TEST_TYPE": "runtime" }, "result": { "apt.AptRepoTest.test_apt_install_from_repo": { "duration": 0.0004506111145019531, "log": "Test requires apt to be installed", "status": "SKIPPED" }, "buildcpio.BuildCpioTest.test_cpio": { "duration": 486.1660838127136, "status": "PASSED" }, "buildgalculator.GalculatorTest.test_galculator": { "duration": 0.0007913112640380859, "log": "Test requires gtk+3 to be installed", "status": "SKIPPED" }, "buildlzip.BuildLzipTest.test_lzip": { "duration": 109.25869297981262, "status": "PASSED" }, "connman.ConnmanTest.test_connmand_help": { "duration": 0.4966273307800293, "status": "PASSED" }, "connman.ConnmanTest.test_connmand_running": { "duration": 0.5114743709564209, "status": "PASSED" }, "date.DateTest.test_date": { "duration": 7.85713267326355, "status": "PASSED" }, "df.DfTest.test_df": { "duration": 0.5806612968444824, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_help": { "duration": 7.873364448547363, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_history": { "duration": 6.952740669250488, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_info": { "duration": 4.685353994369507, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_search": { "duration": 4.566269636154175, "status": "PASSED" }, "dnf.DnfBasicTest.test_dnf_version": { "duration": 4.323004484176636, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_exclude": { "duration": 79.90639615058899, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install": { "duration": 17.90331768989563, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_dependency": { "duration": 26.937426328659058, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_disk": { "duration": 31.896808385849, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_install_from_http": { "duration": 26.631447315216064, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot": { "duration": 56.105753898620605, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { "duration": 0.0006937980651855469, "log": "Test run when enable usrmege", "status": "SKIPPED" }, "dnf.DnfRepoTest.test_dnf_makecache": { "duration": 4.149430990219116, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_reinstall": { "duration": 6.104025840759277, "status": "PASSED" }, "dnf.DnfRepoTest.test_dnf_repoinfo": { "duration": 4.625005483627319, "status": "PASSED" }, "gcc.GccCompileTest.test_gcc_compile": { "duration": 3.6107523441314697, "status": "PASSED" }, "gcc.GccCompileTest.test_gpp2_compile": { "duration": 4.0081586837768555, "status": "PASSED" }, "gcc.GccCompileTest.test_gpp_compile": { "duration": 4.543682098388672, "status": "PASSED" }, "gcc.GccCompileTest.test_make": { "duration": 3.160100221633911, "status": "PASSED" }, "gi.GObjectIntrospectionTest.test_python": { "duration": 1.8454930782318115, "status": "PASSED" }, "kernelmodule.KernelModuleTest.test_kernel_module": { "duration": 174.6141209602356, "status": "PASSED" }, "ldd.LddTest.test_ldd": { "duration": 1.4969167709350586, "status": "PASSED" }, "logrotate.LogrotateTest.test_logrotate_newlog": { "duration": 2.8236289024353027, "status": "PASSED" }, "logrotate.LogrotateTest.test_logrotate_wtmp": { "duration": 2.8346400260925293, "status": "PASSED" }, "oe_syslog.SyslogTest.test_syslog_running": { "duration": 0.5107247829437256, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_logger": { "duration": 1.8989617824554443, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_restart": { "duration": 1.058091402053833, "status": "PASSED" }, "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { "duration": 0.00021886825561523438, "log": "Not appropiate for systemd image", "status": "SKIPPED" }, "opkg.OpkgRepoTest.test_opkg_install_from_repo": { "duration": 0.00014901161193847656, "log": "Test requires opkg to be installed", "status": "SKIPPED" }, "pam.PamBasicTest.test_pam": { "duration": 1.9274208545684814, "status": "PASSED" }, "parselogs.ParseLogsTest.test_parselogs": { "duration": 8.630930662155151, "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/dunfell/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/dunfell/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 375, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/dunfell/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.428497] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.106949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.106975] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108442] xor: measuring software checksum speed\n[ 0.199113] arm4regs : 1218.800 MB/sec\n[ 0.299054] 8regs : 905.200 MB/sec\n[ 0.399049] 32regs : 1172.400 MB/sec\n[ 0.399057] xor: using function: arm4regs (1218.800 MB/sec)\n[ 0.399074] pinctrl core: initialized pinctrl subsystem\n[ 0.400341] NET: Registered protocol family 16\n[ 0.402925] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428497] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430823] cpuidle: using governor ladder\n[ 0.430860] cpuidle: using governor menu\n[ 0.448263] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449482] Serial: AMBA PL011 UART driver\n[ 0.640167] raid6: int32x8 gen() 151 MB/s\n[ 0.809190] raid6: int32x8 xor() 102 MB/s\n[ 0.979208] raid6: int32x4 gen() 159 MB/s\n[ 1.149222] raid6: int32x4 xor() 113 MB/s\n[ 1.319103] raid6: int32x2 gen() 270 MB/s\n[ 1.489084] raid6: int32x2 xor() 190 MB/s\n\n***********************\nCentral error: [ 3.294071] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.149093] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.154549] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.158840] usbcore: registered new interface driver usb-storage\n[ 3.166502] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.185953] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.214870] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.219537] i2c /dev entries driver\n[ 3.222955] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.230755] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.238353] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.294071] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.304874] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.312805] usbcore: registered new interface driver usbhid\n[ 3.317352] usbhid: USB HID core driver\n[ 3.320068] mmc0: new high speed SDHC card at address 1234\n[ 3.325494] oprofile: using arm/armv7\n[ 3.328797] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.332154] u32 classifier\n[ 3.333565] input device check on\n[ 3.337490] Actions configured\n[ 3.340559] NET: Registered protocol family 10\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", "status": "FAILED" }, "perl.PerlTest.test_perl_works": { "duration": 0.4689674377441406, "status": "PASSED" }, "ping.PingTest.test_ping": { "duration": 0.365527868270874, "status": "PASSED" }, "ptest.PtestRunnerTest.test_ptestrunner_expectfail": { "duration": 0.0003483295440673828, "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": { "duration": 0.00020647048950195312, "log": "Test requires ptest-runner to be installed", "status": "SKIPPED" }, "python.PythonTest.test_python3": { "duration": 0.6984875202178955, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_help": { "duration": 0.5054652690887451, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query": { "duration": 0.978069543838501, "status": "PASSED" }, "rpm.RpmBasicTest.test_rpm_query_nonroot": { "duration": 6.294391632080078, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { "duration": 32.741164445877075, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_install": { "duration": 2.725797176361084, "status": "PASSED" }, "rpm.RpmInstallRemoveTest.test_rpm_remove": { "duration": 1.225539207458496, "status": "PASSED" }, "scp.ScpTest.test_scp_file": { "duration": 2.0600035190582275, "status": "PASSED" }, "ssh.SSHTest.test_ssh": { "duration": 8.18463659286499, "status": "PASSED" }, "stap.StapTest.test_stap": { "duration": 212.59397077560425, "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_basic": { "duration": 0.50443434715271, "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_failed": { "duration": 1.0222678184509277, "status": "PASSED" }, "systemd.SystemdBasicTests.test_systemd_list": { "duration": 3.765279769897461, "status": "PASSED" }, "systemd.SystemdJournalTests.test_systemd_boot_time": { "duration": 0.6052267551422119, "status": "PASSED" }, "systemd.SystemdJournalTests.test_systemd_journal": { "duration": 0.7987122535705566, "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable": { "duration": 6.4665257930755615, "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": { "duration": 0.000377655029296875, "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES", "status": "SKIPPED" }, "systemd.SystemdServiceTests.test_systemd_status": { "duration": 0.5536174774169922, "status": "PASSED" }, "systemd.SystemdServiceTests.test_systemd_stop_start": { "duration": 2.259965658187866, "status": "PASSED" }, "weston.WestonTest.test_weston_running": { "duration": 0.00039076805114746094, "log": "Test requires weston to be installed", "status": "SKIPPED" }, "xorg.XorgTest.test_xorg_running": { "duration": 1.1271822452545166, "status": "PASSED" } } } }