diff options
Diffstat (limited to '3.4_M2_RC1/3.4_M2.rc1_test_results/beaglebone/testresults.json')
| -rw-r--r-- | 3.4_M2_RC1/3.4_M2.rc1_test_results/beaglebone/testresults.json | 716 |
1 files changed, 716 insertions, 0 deletions
diff --git a/3.4_M2_RC1/3.4_M2.rc1_test_results/beaglebone/testresults.json b/3.4_M2_RC1/3.4_M2.rc1_test_results/beaglebone/testresults.json new file mode 100644 index 0000000000..defed45668 --- /dev/null +++ b/3.4_M2_RC1/3.4_M2.rc1_test_results/beaglebone/testresults.json @@ -0,0 +1,716 @@ +{
+ "manual_bsp-hw_20210723171834": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210723171834",
+ "TEST_MODULE": "bsp-hw",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_ABAT": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_and_install_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.live_boot_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
+ "status": "SKIPPED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210723013742": {
+ "configuration": {
+ "DISTRO": "poky-altcfg",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210723013742",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.00024890899658203125,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 501.4090895652771,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0008912086486816406,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 126.01361393928528,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.5361826419830322,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.5464041233062744,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 8.329414129257202,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.6195034980773926,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.313959836959839,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 6.7234787940979,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 4.640332937240601,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.544834613800049,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.380206108093262,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 90.67854905128479,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 21.14708113670349,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 27.90341830253601,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 33.2777783870697,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 28.199080228805542,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 56.08210372924805,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0006902217864990234,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 4.173519134521484,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.329023599624634,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.629401445388794,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 3.7181389331817627,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 4.136041641235352,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 6.975337743759155,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 3.2655277252197266,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 2.0118768215179443,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 135.79109382629395,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 1.533344030380249,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 2.9275975227355957,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 2.4694130420684814,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.5328414440155029,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.9231414794921875,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 1.1213111877441406,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 0.0005357265472412109,
+ "log": "Not appropiate for systemd image",
+ "status": "SKIPPED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.00047135353088378906,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 1.981236219406128,
+ "status": "PASSED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 8.901776313781738,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 383, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.428306] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107444] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108846] xor: measuring software checksum speed\n[ 0.199057] arm4regs : 1221.600 MB/sec\n[ 0.299004] 8regs : 905.200 MB/sec\n[ 0.399001] 32regs : 1220.800 MB/sec\n[ 0.399008] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399024] pinctrl core: initialized pinctrl subsystem\n[ 0.400257] NET: Registered protocol family 16\n[ 0.402768] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428306] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430661] cpuidle: using governor ladder\n[ 0.430698] cpuidle: using governor menu\n[ 0.448225] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449571] Serial: AMBA PL011 UART driver\n[ 0.629333] raid6: int32x8 gen() 152 MB/s\n[ 0.799575] raid6: int32x8 xor() 101 MB/s\n[ 0.969026] raid6: int32x4 gen() 160 MB/s\n[ 1.139169] raid6: int32x4 xor() 114 MB/s\n[ 1.309142] raid6: int32x2 gen() 290 MB/s\n[ 1.479164] raid6: int32x2 xor() 185 MB/s\n\n***********************\nCentral error: [ 3.324349] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.179324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.184774] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.189064] usbcore: registered new interface driver usb-storage\n[ 3.196746] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.216207] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.245275] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.249920] i2c /dev entries driver\n[ 3.253320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.261105] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.268687] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.324349] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.335150] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.341983] usbcore: registered new interface driver usbhid\n[ 3.346394] usbhid: USB HID core driver\n[ 3.349079] mmc0: new high speed SDHC card at address 1234\n[ 3.354668] oprofile: using arm/armv7\n[ 3.357962] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.361357] u32 classifier\n[ 3.362768] input device check on\n[ 3.366582] Actions configured\n[ 3.370066] NET: Registered protocol family 10\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.4904947280883789,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.03241467475891113,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0005853176116943359,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00040531158447265625,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.7103745937347412,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.5196211338043213,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 1.0126042366027832,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 6.804650068283081,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 35.32269310951233,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.9082651138305664,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.3724949359893799,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 1.9985992908477783,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 83.3269715309143,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 267.09698843955994,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.5023829936981201,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 1.0500216484069824,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 4.03955078125,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.6434779167175293,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.8519470691680908,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 6.827773332595825,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0005526542663574219,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.5619626045227051,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 2.328599452972412,
+ "status": "PASSED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0005862712860107422,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.00039196014404296875,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.0003840923309326172,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 1.099780797958374,
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210723023719": {
+ "configuration": {
+ "DISTRO": "poky",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "1ad79313a5c3e6a453fbeb44caac5c5bbad46d3c",
+ "commit_count": 62691
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210723023719",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.00033783912658691406,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 1373.3997287750244,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.001249551773071289,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 372.7975950241089,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.6658315658569336,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.7101459503173828,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 2.146181344985962,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.5819573402404785,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 23.99582576751709,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 15.581977367401123,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 12.885380983352661,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 12.608625888824463,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 12.186885118484497,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 253.65135622024536,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 50.084468364715576,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 49.53603672981262,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 63.4645254611969,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 49.85603618621826,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 103.24236178398132,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0007476806640625,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 11.39137864112854,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 17.276694297790527,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 12.909241199493408,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 5.666211366653442,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 6.909126281738281,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 15.537386417388916,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 5.198627233505249,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 4.96053409576416,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 369.77965569496155,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 1.7662689685821533,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 3.3198132514953613,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 2.7790493965148926,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.6552639007568359,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 2.0992958545684814,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 5.745725870132446,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 13.123607397079468,
+ "status": "PASSED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0005710124969482422,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 0.000743865966796875,
+ "log": "Test requires pam to be in DISTRO_FEATURES",
+ "status": "SKIPPED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 10.301366329193115,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 383, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 14 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.133805] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092145] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093393] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093562] rcu: Hierarchical SRCU implementation.\n[ 0.094886] devtmpfs: initialized\n[ 0.109506] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109845] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111329] pinctrl core: initialized pinctrl subsystem\n[ 0.112587] NET: Registered protocol family 16\n[ 0.115243] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133805] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.135134] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135509] cpuidle: using governor ladder\n[ 0.135552] cpuidle: using governor menu\n[ 1.316303] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.317533] Serial: AMBA PL011 UART driver\n[ 1.339591] Kprobes globally optimized\n[ 1.510596] raid6: int32x8 gen() 170 MB/s\n[ 1.680891] raid6: int32x8 xor() 105 MB/s\n[ 1.850560] raid6: int32x4 gen() 199 MB/s\n[ 2.020618] raid6: int32x4 xor() 117 MB/s\n\n***********************\nCentral error: [ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.617607] xor: measuring software checksum speed\n[ 3.625415] arm4regs : 1274 MB/sec\n[ 3.636077] 8regs : 939 MB/sec\n[ 3.643877] 32regs : 1273 MB/sec\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.636077] 8regs : 939 MB/sec\n[ 3.643877] 32regs : 1273 MB/sec\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n[ 4.218366] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.783288] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n[ 4.218366] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.783288] printk: console [ttyS0] enabled\n[ 4.788923] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.794197] random: crng init done\n\n***********************\nCentral error: [ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.100889] ThumbEE CPU extension supported.\n[ 5.103880] omap_voltage_late_init: Voltage driver support not added\n[ 5.109585] Loading compiled-in X.509 certificates\n[ 5.113220] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.120681] Key type ._fscrypt registered\n[ 5.123843] Key type .fscrypt registered\n[ 5.126587] Key type fscrypt-provisioning registered\n[ 5.132226] Btrfs loaded, crc32c=crc32c-generic\n[ 5.137826] Key type encrypted registered\n[ 5.158260] OMAP GPIO hardware version 0.1\n[ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.201479] mmc1: new high speed MMC card at address 0001\n[ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.212002] mmcblk1: mmc1:0001 MMC02G 1.79 GiB \n[ 5.215580] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB\n[ 5.222781] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB\n[ 5.227588] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.231916] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.238905] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.246709] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.264529] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n\n***********************\nCentral error: [ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.109585] Loading compiled-in X.509 certificates\n[ 5.113220] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.120681] Key type ._fscrypt registered\n[ 5.123843] Key type .fscrypt registered\n[ 5.126587] Key type fscrypt-provisioning registered\n[ 5.132226] Btrfs loaded, crc32c=crc32c-generic\n[ 5.137826] Key type encrypted registered\n[ 5.158260] OMAP GPIO hardware version 0.1\n[ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.201479] mmc1: new high speed MMC card at address 0001\n[ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.212002] mmcblk1: mmc1:0001 MMC02G 1.79 GiB \n[ 5.215580] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB\n[ 5.222781] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB\n[ 5.227588] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.231916] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.238905] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.246709] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.264529] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.273753] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.277328] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\nLog: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.133805] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092145] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093393] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093562] rcu: Hierarchical SRCU implementation.\n[ 0.094886] devtmpfs: initialized\n[ 0.109506] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109845] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111329] pinctrl core: initialized pinctrl subsystem\n[ 0.112587] NET: Registered protocol family 16\n[ 0.115243] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133805] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.135134] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135509] cpuidle: using governor ladder\n[ 0.135552] cpuidle: using governor menu\n[ 1.316303] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.317533] Serial: AMBA PL011 UART driver\n[ 1.339591] Kprobes globally optimized\n[ 1.510596] raid6: int32x8 gen() 170 MB/s\n[ 1.680891] raid6: int32x8 xor() 105 MB/s\n[ 1.850560] raid6: int32x4 gen() 199 MB/s\n[ 2.020618] raid6: int32x4 xor() 117 MB/s\n\n***********************\nCentral error: [ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.617607] xor: measuring software checksum speed\n[ 3.625415] arm4regs : 1274 MB/sec\n[ 3.636077] 8regs : 939 MB/sec\n[ 3.643877] 32regs : 1273 MB/sec\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.636077] 8regs : 939 MB/sec\n[ 3.643877] 32regs : 1273 MB/sec\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.643887] xor: using function: arm4regs (1274 MB/sec)\n[ 3.643912] Key type asymmetric registered\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n[ 4.218366] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.783288] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.643922] Asymmetric key parser 'x509' registered\n[ 3.644014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.644028] io scheduler mq-deadline registered\n[ 3.644036] io scheduler kyber registered\n[ 3.803194] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.803232] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 4.041237] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.041272] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.104391] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.104428] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.116726] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.116756] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.183665] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.183710] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.206576] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.215588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.218248] printk: console [ttyS0] disabled\n[ 4.218366] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.783288] printk: console [ttyS0] enabled\n[ 4.788923] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.794197] random: crng init done\n\n***********************\nCentral error: [ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.100889] ThumbEE CPU extension supported.\n[ 5.103880] omap_voltage_late_init: Voltage driver support not added\n[ 5.109585] Loading compiled-in X.509 certificates\n[ 5.113220] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.120681] Key type ._fscrypt registered\n[ 5.123843] Key type .fscrypt registered\n[ 5.126587] Key type fscrypt-provisioning registered\n[ 5.132226] Btrfs loaded, crc32c=crc32c-generic\n[ 5.137826] Key type encrypted registered\n[ 5.158260] OMAP GPIO hardware version 0.1\n[ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.201479] mmc1: new high speed MMC card at address 0001\n[ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.212002] mmcblk1: mmc1:0001 MMC02G 1.79 GiB \n[ 5.215580] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB\n[ 5.222781] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB\n[ 5.227588] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.231916] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.238905] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.246709] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.264529] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n\n***********************\nCentral error: [ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.109585] Loading compiled-in X.509 certificates\n[ 5.113220] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.120681] Key type ._fscrypt registered\n[ 5.123843] Key type .fscrypt registered\n[ 5.126587] Key type fscrypt-provisioning registered\n[ 5.132226] Btrfs loaded, crc32c=crc32c-generic\n[ 5.137826] Key type encrypted registered\n[ 5.158260] OMAP GPIO hardware version 0.1\n[ 5.190678] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.201479] mmc1: new high speed MMC card at address 0001\n[ 5.207638] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.212002] mmcblk1: mmc1:0001 MMC02G 1.79 GiB \n[ 5.215580] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB\n[ 5.222781] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB\n[ 5.227588] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.231916] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.238905] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.246709] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.264529] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.273753] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.277328] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\n14 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.5776855945587158,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.03447222709655762,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0005841255187988281,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00039768218994140625,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 1.2377839088439941,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.6530182361602783,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 1.2363064289093018,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 12.239370346069336,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 74.91528868675232,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 5.61507248878479,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 2.798807144165039,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 2.8676867485046387,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 1.088181495666504,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 638.9700045585632,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.0007576942443847656,
+ "log": "systemd is not the init manager for this image",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 0.0005340576171875,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 0.00039267539978027344,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.0004596710205078125,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.00039267539978027344,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 0.0005776882171630859,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0004520416259765625,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.00044083595275878906,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 0.00038814544677734375,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0005214214324951172,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.0004334449768066406,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.00043845176696777344,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 1.3384430408477783,
+ "status": "PASSED"
+ }
+ }
+ }
+}
\ No newline at end of file |