aboutsummaryrefslogtreecommitdiffstats
path: root/3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json
diff options
context:
space:
mode:
Diffstat (limited to '3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json')
-rw-r--r--3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json653
1 files changed, 653 insertions, 0 deletions
diff --git a/3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json b/3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json
new file mode 100644
index 0000000000..6cbea37ab7
--- /dev/null
+++ b/3.0.2_RC2/3.0.2_RC2_test_results/beaglebone/testresults.json
@@ -0,0 +1,653 @@
+{
+ "manual_bsp-hw_20200218122342": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-poky": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-yocto-bsp": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20200218122342",
+ "TEST_MODULE": "bsp-hw",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Boot_from_JFFS2_image": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_target_can_support_EEPROM": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_ABAT": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.MicroSD_-__mount": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.MicroSD_-__read_files": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.MicroSD_-__umount": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.MicroSD_-__write_files": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.USB_-_mount": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.USB_-_read_files": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.USB_-_umount": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.USB_-_write_files": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.X_server_can_start_up_with_runlevel_5_boot": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_and_install_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_3": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_5": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.check_bash_in_image": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.live_boot_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.reboot_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.rpm_-__install_dependency_package": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.shutdown_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
+ "status": "SKIPPED"
+ }
+ }
+ },
+ "manual_compliance-test_20200218123235": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-poky": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-yocto-bsp": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20200218123235",
+ "TEST_MODULE": "compliance-test",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "compliance-test.compliance-test.stress_test_-_- crashme_-_-Beaglebone": {
+ "status": "PASSED"
+ },
+ "compliance-test.compliance-test.stress_test_-_Genericx86-64": {
+ "status": "SKIPPED"
+ },
+ "compliance-test.compliance-test.stress_test_-_ltp_-Beaglebone": {
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20200217015648": {
+ "configuration": {
+ "DISTRO": "poky",
+ "HOST_DISTRO": "ubuntu-16.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-poky": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-yocto-bsp": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20200217015648",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_1_logrotate_setup": {
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_2_logrotate": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "status": "PASSED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "log": "Test requires pam to be in DISTRO_FEATURES",
+ "status": "SKIPPED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/zeus/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/zeus/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 4 != 0 : Log: /buildarea4/yzhao1/yocto/zeus/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.423547] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107309] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108685] xor: measuring software checksum speed\n[ 0.199131] arm4regs : 1221.600 MB/sec\n[ 0.299074] 8regs : 905.200 MB/sec\n[ 0.399072] 32regs : 1175.200 MB/sec\n[ 0.399080] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399095] pinctrl core: initialized pinctrl subsystem\n[ 0.400269] NET: Registered protocol family 16\n[ 0.402649] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423547] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450864] cpuidle: using governor ladder\n[ 0.450899] cpuidle: using governor menu\n[ 0.467277] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468328] Serial: AMBA PL011 UART driver\n[ 0.649459] raid6: int32x8 gen() 180 MB/s\n[ 0.819709] raid6: int32x8 xor() 122 MB/s\n[ 0.989232] raid6: int32x4 gen() 209 MB/s\n[ 1.159306] raid6: int32x4 xor() 152 MB/s\n[ 1.329092] raid6: int32x2 gen() 272 MB/s\n[ 1.499106] raid6: int32x2 xor() 191 MB/s\n\n***********************\nCentral error: [ 3.201880] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063645] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067937] usbcore: registered new interface driver usb-storage\n[ 3.075522] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095102] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123406] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128053] i2c /dev entries driver\n[ 3.131418] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139082] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146665] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201880] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.211957] usbcore: registered new interface driver usbhid\n[ 3.216422] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223225] usbhid: USB HID core driver\n[ 3.227040] oprofile: using arm/armv7\n[ 3.229654] u32 classifier\n[ 3.231134] Actions configured\n[ 3.233459] mmc0: new high speed SDHC card at address 1234\n[ 3.238581] NET: Registered protocol family 10\n[ 3.243586] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248521] Segment Routing with IPv6\n\n***********************\nLog: /buildarea4/yzhao1/yocto/zeus/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.423547] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107309] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108685] xor: measuring software checksum speed\n[ 0.199131] arm4regs : 1221.600 MB/sec\n[ 0.299074] 8regs : 905.200 MB/sec\n[ 0.399072] 32regs : 1175.200 MB/sec\n[ 0.399080] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399095] pinctrl core: initialized pinctrl subsystem\n[ 0.400269] NET: Registered protocol family 16\n[ 0.402649] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423547] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450864] cpuidle: using governor ladder\n[ 0.450899] cpuidle: using governor menu\n[ 0.467277] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468328] Serial: AMBA PL011 UART driver\n[ 0.649459] raid6: int32x8 gen() 180 MB/s\n[ 0.819709] raid6: int32x8 xor() 122 MB/s\n[ 0.989232] raid6: int32x4 gen() 209 MB/s\n[ 1.159306] raid6: int32x4 xor() 152 MB/s\n[ 1.329092] raid6: int32x2 gen() 272 MB/s\n[ 1.499106] raid6: int32x2 xor() 191 MB/s\n\n***********************\nCentral error: [ 3.201880] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063645] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067937] usbcore: registered new interface driver usb-storage\n[ 3.075522] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095102] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123406] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128053] i2c /dev entries driver\n[ 3.131418] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139082] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146665] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201880] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.211957] usbcore: registered new interface driver usbhid\n[ 3.216422] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223225] usbhid: USB HID core driver\n[ 3.227040] oprofile: using arm/armv7\n[ 3.229654] u32 classifier\n[ 3.231134] Actions configured\n[ 3.233459] mmc0: new high speed SDHC card at address 1234\n[ 3.238581] NET: Registered protocol family 10\n[ 3.243586] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248521] Segment Routing with IPv6\n\n***********************\n4 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner": {
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "log": "systemd is not the init manager for this image",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20200217043308": {
+ "configuration": {
+ "DISTRO": "poky-altcfg",
+ "HOST_DISTRO": "ubuntu-16.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-poky": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ },
+ "meta-yocto-bsp": {
+ "branch": "zeus",
+ "commit": "fe857e4179355bcfb79303c16baf3ad87fca59a4",
+ "commit_count": 56196
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20200217043308",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_1_logrotate_setup": {
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_2_logrotate": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "log": "Not appropiate for systemd image",
+ "status": "SKIPPED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "status": "PASSED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/zeus/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/zeus/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/zeus/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.423528] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107310] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107333] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108707] xor: measuring software checksum speed\n[ 0.199128] arm4regs : 1221.600 MB/sec\n[ 0.299072] 8regs : 905.200 MB/sec\n[ 0.399070] 32regs : 1175.200 MB/sec\n[ 0.399078] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399093] pinctrl core: initialized pinctrl subsystem\n[ 0.400277] NET: Registered protocol family 16\n[ 0.402660] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423528] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450867] cpuidle: using governor ladder\n[ 0.450900] cpuidle: using governor menu\n[ 0.467347] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468389] Serial: AMBA PL011 UART driver\n[ 0.649430] raid6: int32x8 gen() 180 MB/s\n[ 0.819716] raid6: int32x8 xor() 122 MB/s\n[ 0.989223] raid6: int32x4 gen() 209 MB/s\n[ 1.159319] raid6: int32x4 xor() 152 MB/s\n[ 1.329076] raid6: int32x2 gen() 272 MB/s\n[ 1.499084] raid6: int32x2 xor() 191 MB/s\n\n***********************\nCentral error: [ 3.201990] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063737] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.068037] usbcore: registered new interface driver usb-storage\n[ 3.075651] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095144] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123435] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128102] i2c /dev entries driver\n[ 3.131484] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139179] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146754] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201990] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.212084] usbcore: registered new interface driver usbhid\n[ 3.216551] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223354] usbhid: USB HID core driver\n[ 3.227170] oprofile: using arm/armv7\n[ 3.229782] u32 classifier\n[ 3.231261] Actions configured\n[ 3.233591] mmc0: new high speed SDHC card at address 1234\n[ 3.238722] NET: Registered protocol family 10\n[ 3.243721] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248692] Segment Routing with IPv6\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner": {
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "status": "PASSED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "status": "PASSED"
+ }
+ }
+ }
+} \ No newline at end of file