| Age | Commit message (Collapse) | Author |
|---|
|
I missed a "Yocto Project Files" term because the damn thing split
across two lines in the source file and my grep method did not find
it. Changed it to "source directory."
(From yocto-docs rev: 31a261c141d3e26f4a87b9725097005c96345e2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mentioned at the very end of the beagleboard build that the image
can now be run on the target hardware.
Also, specically noted the local.conf file as "conf/local.conf" in
the build directory.
Reported-by: Kevin Strasser <keven.strasser@intel.com>
(From yocto-docs rev: a4b41c7f5e8e8017401961097e0df4b13458ac24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Minor fixes to some links and some typos.
(From yocto-docs rev: 8d1f53bca404461f8edc526d5e144ef7d76f0594)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I did a scrub for the term "Yocto" and substituted appropriately.
This resulted in the term "Yocto Project build system" going away and
being replaced by "OpenEmbedded build system." The "Yocto Project
build directory" was replaced by "build directory." I also found a few
little things that were wrong like including the Debian distro in the
list of supported distros so I removed that. Finally, a spell check
produced a couple of fixes.
(From yocto-docs rev: 6957658982516aa4b0e4726c9344c46854aa11d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I fixed several "Yocto Project build system" terms and some "Yocto
Project Build Directory" terms.
(From yocto-docs rev: 10c1d50380336ac684243525646ac9aa3c1812d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Found a stray reference to "Yocto Project Build Directory." I changed
to "build directory."
(From yocto-docs rev: e0c593ac162c61f7d42625482b95c253d0f8622a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated the build/tmp/log directory description to mention that running
a build does not necessarily mean a log directory is created. Also,
ran a spell check and found a typo.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c602919a1f188a4dff23f965bcc52b635f9a92ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
the section describing meta/recipes.txt had the "/" character at the
end of the filename, which is incorrect. I removed this.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 28295d8c46d3a2cc6b53f0a7ccea35f1db77d1df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Made a few edits to better describe how the scripts and bin/bitbake
directories are placed into the PATH variable.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 1e45731898935d40db6e6705f60bdea9633255ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The description of how BitBake is run and where its executable and
wrapper script reside has been updated to be more accurate.
Reported-by: Robert J. P. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 885b4c42a3ec3d228f1f5659a887627f4fe2d939)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section on "Dependency Graphs" failed to mention the
package-depends.dot file among the files. Added this file to the
list.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0ebf8ddf54e146454d6f300f790964decaeec6a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
this information was missing in the appendix.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64ea0871e0a6cef45259502ff26e1c5b5a66cac1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Information about this directory was absent in the manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64e5f5a403e4c8494885c7da504194d1baecb0ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO_#2671]
Added a bit more in here about considering requesting rights to have
a contrib area to YP and OE if user is a regular and significant
contributor.
(From yocto-docs rev: b54bba33b2706bed593a9ee66d5c72f820c37d32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section that describes how to send a patch upstream via email
did not have a good connection to the various mailing lists. I
added some references to this section and also mentioned using
the scripts if the user has many changes to commit.
(From yocto-docs rev: ad75ae45420c43bda974d22b02094237b5c7cc50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: d1ca036f11203f842eb87a204487c414ee901818)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: d64bf592f16f2462727aedf6b9c552ec9c73d72c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bug 2256 is now fixed in master and the fix will be in the next release,
so update the documentation accordingly.
(From yocto-docs rev: 877a7ecfd1623417d0793a5dd16b66c35b6fdbae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"shared state cache" is the generally accepted term for this.
(From yocto-docs rev: a15f629afe46e7217182a1ac077ab59641be9a8c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's CONFIG_SMP here, and since the title of the section already
mentions it, just change the sentence to be more generic.
(From yocto-docs rev: 32e6145b5f41d4eb293f8267ef01d02217143152)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Change some of the language and patch submission directions to
correctly represent how we work together with OpenEmbedded (this
changed with the introduction of OE-Core a few releases ago).
* Correct --help option to -h for pull request scripts
* Clarify commit message guidelines
* Touch up a few other bits and pieces
Fixes [YOCTO #2671].
(From yocto-docs rev: 3170ce5e0757951afee13207c117316e33449b39)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to include the OpenEmbedded and BitBake mailing lists here as
they are an integral part of the community especially for patch
submission.
Note that this supersedes the information about mailing lists in the dev
manual (which should be replaced with a link to this section).
(From yocto-docs rev: e9bae0a323af2d95505c5492be985232440842ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 3da2ed1ccdb812d1b0999f95f0db19fc5e5bf818)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I have changed as many "Yocto Project" terms as possible so that
better reflect reality.
(From yocto-docs rev: 5f729e53b0cb653c97621e4e6598d9295d60ada5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Got rid of some old author text.
(From yocto-docs rev: 358ff9b2de4196d23a51215ea56193fa23ebaa1a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed all occurrences of "Yocto Project" to terms better suited
to reality.
(From yocto-docs rev: fdd7b8c2bcbaf566cad336c67c582c2a24aa9dc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Throughout the manual, the kernels that are built and available through
the Yocto Project were being referenced as a "Linux Yocto kernel."
This reference is poor. First, it placed Linux and Yocto very close
together and could upset the Linux folks. Second, a better way would
have been to say "Yocto Linux kernel." I have fixed by referring to
kernels that are available through the Yocto Project as
"Yocto Project kernels."
(From yocto-docs rev: 9b8319328cd4ab4ce3363001c9feeec585d9cab9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I have replaced the term "Yocto Project" with more appropriate terms
where possible.
(From yocto-docs rev: 622ef9a2b4897ecd151b641b43d7706ab673c989)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Scrubbed the manual for the term "Yocto Project", which has been
over-used. I updated occurrances to better represent actual bits
rather than generically referring to everything as Yocto Project.
(From yocto-docs rev: f70cffeffa0d8863a88783607621bf6f7125d02d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pared down the use of the term Yocto Project.
(From yocto-docs rev: d62747ca1d42cae703d1cd307dfe16bb9682b741)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes throughout the manual that either eliminate or change
many of the "Yocto Project" strings. The file structure for
the meta data is now called "source directory." The build
directory is referred as just that - "build directory." Any
where the build system is referred to it is called the
"OpenEmbedded build system."
(From yocto-docs rev: 1210c19f90d4a52042fec12657212ae3e58e13d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a new FAQ entry on how to get rid of build output and
start over. Sourced by Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3b94911aaf64b9618f8dbc0d8b98384b9ebd33b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I have cleaned up a bit of the FAQ entry for how to use an
external toolchain. This is not complete yet.
(From yocto-docs rev: 030324a6881d8b9b0bcf476a2b7bfdd6fbd978a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cleaned up the glossary description a bit.
(From yocto-docs rev: 344ff68ebb58f4ea62d6cb052b712466f593a9f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: c3a1cdf6c6f157b6796e2091b342d1ff157fd0e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The example did not specify to switch to the "denzil" branch after
establishing the local repo of poky-extras. The example will not
work without this step.
(From yocto-docs rev: 90071570bca2edfceb4adb91bdd9093c095c8825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added a note to warn the user about mixing ADT Intaller installation
methods.
(From yocto-docs rev: 718a48a7ea4753eb1e59e17a75c3d94a9ed166bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changed the xsltproc package to libxslt.
Fixes [YOCTO #2652]
Reported-by: Cristian Ciupitu <cristian.ciupitu@yahoo.com>
(From yocto-docs rev: aa187423e7516fea172cce5fbd4432810d9a63e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: 58a6b4950ba5c8cc3649391f47f08513399556f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previous renditions of the term "Build Appliance" referred to the
VMware system. However, it was determined that the term
"Build Appliance" should really refer to the actual image that
can be booted and run on the VMware applications. I have updated
the areas affected by this change. The change assumes the name of
the built or downloaded file you boot will be named
"build-appliance-image."
Fixes [YOCTO_#2656]
(From yocto-docs rev: 6b27b7d92b9722351eb43a7c2a341ce3af056dba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dialogue for the Yocto Project Settings is now "Yocto Project
Settings" instead of "Project Yocto Settings." Updated the manual.
(From yocto-docs rev: 980b4d22dab4ac681c6dc1a85e78306213799062)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The selection "Yocto ADT Project" has changed to "Yocto Project ADT
Project."
(From yocto-docs rev: aa61cd4f93e08373ef430926c008da9f28f72ff8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The section that describes how to generate the cross-toolchain into the
Yocto build tree erroneously referred to this process as installing the
toolchain. Furthermore, it actually mentioned the creation of a
toolchain tarball, which is wrong. I updated the section to more properly
refer to this procedure as generating the toolchain. I also removed the
bit about the tarball creation.
(From yocto-docs rev: 5ae8faa651ed6bf22c5475a4eacb5c758c62cea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The item to click in the step to configure the Eclipse Yocto Plug-in
changed from "Yocto ADT" to "Yocto Project ADT."
(From yocto-docs rev: fc860fe497be6da189e8e48f9546b105b9ff0075)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From yocto-docs rev: e698503896615cf08366b004a66b4562f304e3b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is important that the environment uses a host gcc when running the
adt installer. I put some text in noting that.
(From yocto-docs rev: 7f63662913d6d79843e1bdcadc49bb120bb72688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Typoes/fixes to chapter 3.
(From yocto-docs rev: 5cf906df6ae8a729a8f10510a89e570ed9d900e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The sections describing how to debug remotely and how to use the
oprifiler have been deleted. these sections are now in the YP
Development Manual.
(From yocto-docs rev: 5f277a38a7afe1cc06eafe2ef1b07cc24c8ec546)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Scott Rifenbark
Paul Eggleton
Robert P. J. Day