blob: b83b4e29c14e5a2f5512615051b209320b3f25f6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
DESCRIPTION = "ARM Trusted Firmware"
LICENSE = "BSD"
LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
inherit deploy
DEPENDS += "u-boot-mkimage-native"
S = "${WORKDIR}/git"
BRANCH = "master"
SRC_URI = "git://github.com/Xilinx/arm-trusted-firmware.git;protocol=https;branch=${BRANCH}"
# This points at the 'xilinx-v2016.3' tag
SRCREV ?= "a9e3716615a23c78e3cdea5b5b2f840f89817cb1"
PV = "1.2+xilinx+git${SRCPV}"
COMPATIBLE_MACHINE = "zynqmp"
PLATFORM_zynqmp = "zynqmp"
# requires CROSS_COMPILE set by hand as there is no configure script
export CROSS_COMPILE="${TARGET_PREFIX}"
# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application
CFLAGS[unexport] = "1"
LDFLAGS[unexport] = "1"
AS[unexport] = "1"
LD[unexport] = "1"
do_configure() {
:
}
do_compile() {
oe_runmake PLAT=${PLATFORM} RESET_TO_BL31=1 bl31
}
do_install() {
:
}
OUTPUT_DIR = "${S}/build/${PLATFORM}/release"
do_deploy() {
install -d ${DEPLOYDIR}
install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}.elf
install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}.bin
# Get the entry point address from the elf.
BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g')
mkimage -A arm64 -O linux -T kernel -C none \
-a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \
-d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/atf.ub
}
addtask deploy before do_build after do_compile
|
