diff options
authorManjukumar Matha <manjukumar.harthikote-matha@xilinx.com>2018-12-19 17:24:41 -0800
committerManjukumar Matha <manjukumar.harthikote-matha@xilinx.com>2019-06-28 13:30:26 -0700
commit092608220442b2ca86ef802cb9599c825f27216b (patch)
parent7e1a71d031265964e28e1d6b4b80b88aab9d5c58 (diff)
zcu111-zynqmp.conf: Add support for ZCU111 evaluation board
The Zynq® UltraScale+™ RFSoC ZCU111 Evaluation Kit enables designers to jumpstart RF-Class analog designs for wireless, cable access, early-warning(EW)/radar and other high-performance RF applications. This kit features a Zynq Ultrascale+ RFSoC supporting 8x 4GSPS 12-bit ADCs, 8x 6.5GSPS 14-bit DAC, and 8 soft-decision forward error correction (SD-FECs). Complete with ARM Cortex A53 and ARM Cortex-R5 subsystems, UltraScale+ programmable logic, and the highest signal processing bandwith in a Zynq UltraScale+ device, this kit provides a rapid, comprehensive RF Analog-to-Digital signal chain protoyping platform. This patch adds machine configuration file for ZCU111 Evaluation Kit with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Tested-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
1 files changed, 38 insertions, 0 deletions
diff --git a/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf
new file mode 100644
index 00000000..068e4890
--- /dev/null
+++ b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: zcu111-zynqmp
+#@DESCRIPTION: Machine support for ZCU111 Evaluation Board.
+SOC_VARIANT ?= "dr"
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-overrides.inc
+require conf/machine/include/machine-xilinx-default.inc
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+UBOOT_MACHINE = "xilinx_zynqmp_zcu111_revA_defconfig"
+SPL_BINARY ?= "spl/boot.bin"
+SERIAL_CONSOLE ?= "115200 ttyPS0"
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu"
+PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu"
+ u-boot-zynq-uenv \
+ arm-trusted-firmware \
+ virtual/boot-bin \
+ virtual/bootloader \
+ "
+ uEnv.txt \
+ atf-uboot.ub \
+ "