path: root/recipes-kernel/linux/linux-omap/media/0043-OMAP3-ISP-driver.patch

From f12978691d5189949c9296bceb43c5b272c9c03c Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 17 Feb 2009 09:23:45 -0600
Subject: [PATCH 43/43] OMAP3 ISP driver

Last 10 commits from upstream are

omap3isp: Autoidle enabled for ISP
omap3isp: enable AUTOIDLE through module parameter
omap3isp: preview: Fix defect correct config function
omap3isp: video: Replace BUG with WARN_ON in case of buffer queue error
omap3isp: Add module device table
omap3isp: csi2: Print registers on stream on
v4l: OMAP3 ISP CCDC: Add support for 8bit greyscale sensors
omap3isp: ccdc: Set default DC subtract value to 0
omap3isp: Prefix all public symbols with omap3isp_
omap3isp: Fix dependencies and mark as experimental

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: David Cohen <david.cohen@nokia.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@nokia.com>
Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Antti Koskipaa <antti.koskipaa@nokia.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: RaniSuneela <r-m@ti.com>
Signed-off-by: Atanas Filipov <afilipov@mm-sol.com>
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Dominic Curran <dcurran@ti.com>
Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi>
Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
---
 drivers/media/video/Kconfig                  |   13 +
 drivers/media/video/Makefile                 |    2 +
 drivers/media/video/isp/Makefile             |   13 +
 drivers/media/video/isp/cfa_coef_table.h     |  601 +++++++
 drivers/media/video/isp/gamma_table.h        |   90 +
 drivers/media/video/isp/isp.c                | 2221 +++++++++++++++++++++++++
 drivers/media/video/isp/isp.h                |  427 +++++
 drivers/media/video/isp/ispccdc.c            | 2280 ++++++++++++++++++++++++++
 drivers/media/video/isp/ispccdc.h            |  223 +++
 drivers/media/video/isp/ispccp2.c            | 1189 ++++++++++++++
 drivers/media/video/isp/ispccp2.h            |  101 ++
 drivers/media/video/isp/ispcsi2.c            | 1332 +++++++++++++++
 drivers/media/video/isp/ispcsi2.h            |  169 ++
 drivers/media/video/isp/ispcsiphy.c          |  247 +++
 drivers/media/video/isp/ispcsiphy.h          |   74 +
 drivers/media/video/isp/isph3a.h             |  117 ++
 drivers/media/video/isp/isph3a_aewb.c        |  374 +++++
 drivers/media/video/isp/isph3a_af.c          |  429 +++++
 drivers/media/video/isp/isphist.c            |  520 ++++++
 drivers/media/video/isp/isphist.h            |   40 +
 drivers/media/video/isp/isppreview.c         | 2120 ++++++++++++++++++++++++
 drivers/media/video/isp/isppreview.h         |  214 +++
 drivers/media/video/isp/ispqueue.c           | 1136 +++++++++++++
 drivers/media/video/isp/ispqueue.h           |  185 +++
 drivers/media/video/isp/ispreg.h             | 1589 ++++++++++++++++++
 drivers/media/video/isp/ispresizer.c         | 1710 +++++++++++++++++++
 drivers/media/video/isp/ispresizer.h         |  150 ++
 drivers/media/video/isp/ispstat.c            | 1100 +++++++++++++
 drivers/media/video/isp/ispstat.h            |  169 ++
 drivers/media/video/isp/ispvideo.c           | 1264 ++++++++++++++
 drivers/media/video/isp/ispvideo.h           |  202 +++
 drivers/media/video/isp/luma_enhance_table.h |  154 ++
 drivers/media/video/isp/noise_filter_table.h |   90 +
 include/linux/Kbuild                         |    1 +
 include/linux/omap3isp.h                     |  631 +++++++
 35 files changed, 21177 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/isp/Makefile
 create mode 100644 drivers/media/video/isp/cfa_coef_table.h
 create mode 100644 drivers/media/video/isp/gamma_table.h
 create mode 100644 drivers/media/video/isp/isp.c
 create mode 100644 drivers/media/video/isp/isp.h
 create mode 100644 drivers/media/video/isp/ispccdc.c
 create mode 100644 drivers/media/video/isp/ispccdc.h
 create mode 100644 drivers/media/video/isp/ispccp2.c
 create mode 100644 drivers/media/video/isp/ispccp2.h
 create mode 100644 drivers/media/video/isp/ispcsi2.c
 create mode 100644 drivers/media/video/isp/ispcsi2.h
 create mode 100644 drivers/media/video/isp/ispcsiphy.c
 create mode 100644 drivers/media/video/isp/ispcsiphy.h
 create mode 100644 drivers/media/video/isp/isph3a.h
 create mode 100644 drivers/media/video/isp/isph3a_aewb.c
 create mode 100644 drivers/media/video/isp/isph3a_af.c
 create mode 100644 drivers/media/video/isp/isphist.c
 create mode 100644 drivers/media/video/isp/isphist.h
 create mode 100644 drivers/media/video/isp/isppreview.c
 create mode 100644 drivers/media/video/isp/isppreview.h
 create mode 100644 drivers/media/video/isp/ispqueue.c
 create mode 100644 drivers/media/video/isp/ispqueue.h
 create mode 100644 drivers/media/video/isp/ispreg.h
 create mode 100644 drivers/media/video/isp/ispresizer.c
 create mode 100644 drivers/media/video/isp/ispresizer.h
 create mode 100644 drivers/media/video/isp/ispstat.c
 create mode 100644 drivers/media/video/isp/ispstat.h
 create mode 100644 drivers/media/video/isp/ispvideo.c
 create mode 100644 drivers/media/video/isp/ispvideo.h
 create mode 100644 drivers/media/video/isp/luma_enhance_table.h
 create mode 100644 drivers/media/video/isp/noise_filter_table.h
 create mode 100644 include/linux/omap3isp.h

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 6830d28..60c2bf0 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -722,6 +722,19 @@ config VIDEO_VIA_CAMERA
 	   Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
 	   with ov7670 sensors.
 
+config VIDEO_OMAP3
+	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
+	select OMAP_IOMMU
+	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
+	---help---
+	  Driver for an OMAP 3 camera controller.
+
+config VIDEO_OMAP3_DEBUG
+	bool "OMAP 3 Camera debug messages"
+	depends on VIDEO_OMAP3
+	---help---
+	  Enable debug messages on OMAP 3 camera controller driver.
+
 config SOC_CAMERA
 	tristate "SoC camera support"
 	depends on VIDEO_V4L2 && HAS_DMA && I2C
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index adc1bd5..bd2f556 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -124,6 +124,8 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
+obj-$(CONFIG_VIDEO_OMAP3)	+= isp/
+
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
 obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
diff --git a/drivers/media/video/isp/Makefile b/drivers/media/video/isp/Makefile
new file mode 100644
index 0000000..b1b3447
--- /dev/null
+++ b/drivers/media/video/isp/Makefile
@@ -0,0 +1,13 @@
+# Makefile for OMAP3 ISP driver
+
+ifdef CONFIG_VIDEO_OMAP3_DEBUG
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+omap3-isp-objs += \
+	isp.o ispqueue.o ispvideo.o \
+	ispcsiphy.o ispccp2.o ispcsi2.o \
+	ispccdc.o isppreview.o ispresizer.o \
+	ispstat.o isph3a_aewb.o isph3a_af.o isphist.o
+
+obj-$(CONFIG_VIDEO_OMAP3) += omap3-isp.o
diff --git a/drivers/media/video/isp/cfa_coef_table.h b/drivers/media/video/isp/cfa_coef_table.h
new file mode 100644
index 0000000..4ec3fff
--- /dev/null
+++ b/drivers/media/video/isp/cfa_coef_table.h
@@ -0,0 +1,601 @@
+/*
+ * cfa_coef_table.h
+ *
+ * TI OMAP3 ISP - CFA coefficients table
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248,
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248,
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+4,
+250,
+12,
+244,
+250,
+0,
+27,
+0,
+12,
+27,
+36,
+247,
+244,
+0,
+247,
+0,
+0,
+0,
+0,
+248,
+0,
+0,
+40,
+0,
+0,
+247,
+0,
+244,
+247,
+36,
+27,
+12,
+0,
+27,
+0,
+250,
+244,
+12,
+250,
+4,
+0,
+40,
+0,
+0,
+248,
+0,
+0,
+0,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248,
+244,
+12,
+250,
+4,
+0,
+27,
+0,
+250,
+247,
+36,
+27,
+12,
+0,
+247,
+0,
+244,
+248,
+0,
+0,
+0,
+0,
+40,
+0,
+0,
+244,
+0,
+247,
+0,
+12,
+27,
+36,
+247,
+250,
+0,
+27,
+0,
+4,
+250,
+12,
+244,
+0,
+0,
+40,
+0,
+0,
+0,
+0,
+248
diff --git a/drivers/media/video/isp/gamma_table.h b/drivers/media/video/isp/gamma_table.h
new file mode 100644
index 0000000..c2f7ec1
--- /dev/null
+++ b/drivers/media/video/isp/gamma_table.h
@@ -0,0 +1,90 @@
+/*
+ * gamma_table.h
+ *
+ * TI OMAP3 ISP - Default gamma table for all components
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+  0,   0,   1,   2,   3,   3,   4,   5,   6,   8,  10,  12,  14,  16,  18,  20,
+ 22,  23,  25,  26,  28,  29,  31,  32,  34,  35,  36,  37,  39,  40,  41,  42,
+ 43,  44,  45,  46,  47,  48,  49,  50,  51,  52,  52,  53,  54,  55,  56,  57,
+ 58,  59,  60,  61,  62,  63,  63,  64,  65,  66,  66,  67,  68,  69,  69,  70,
+ 71,  72,  72,  73,  74,  75,  75,  76,  77,  78,  78,  79,  80,  81,  81,  82,
+ 83,  84,  84,  85,  86,  87,  88,  88,  89,  90,  91,  91,  92,  93,  94,  94,
+ 95,  96,  97,  97,  98,  98,  99,  99, 100, 100, 101, 101, 102, 103, 104, 104,
+105, 106, 107, 108, 108, 109, 110, 111, 111, 112, 113, 114, 114, 115, 116, 117,
+117, 118, 119, 119, 120, 120, 121, 121, 122, 122, 123, 123, 124, 124, 125, 125,
+126, 126, 127, 127, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, 133, 133,
+134, 134, 135, 135, 136, 136, 137, 137, 138, 138, 139, 139, 140, 140, 141, 141,
+142, 142, 143, 143, 144, 144, 145, 145, 146, 146, 147, 147, 148, 148, 149, 149,
+150, 150, 151, 151, 152, 152, 153, 153, 153, 153, 154, 154, 154, 154, 155, 155,
+156, 156, 157, 157, 158, 158, 158, 159, 159, 159, 160, 160, 160, 161, 161, 162,
+162, 163, 163, 164, 164, 164, 164, 165, 165, 165, 165, 166, 166, 167, 167, 168,
+168, 169, 169, 170, 170, 170, 170, 171, 171, 171, 171, 172, 172, 173, 173, 174,
+174, 175, 175, 176, 176, 176, 176, 177, 177, 177, 177, 178, 178, 178, 178, 179,
+179, 179, 179, 180, 180, 180, 180, 181, 181, 181, 181, 182, 182, 182, 182, 183,
+183, 183, 183, 184, 184, 184, 184, 185, 185, 185, 185, 186, 186, 186, 186, 187,
+187, 187, 187, 188, 188, 188, 188, 189, 189, 189, 189, 190, 190, 190, 190, 191,
+191, 191, 191, 192, 192, 192, 192, 193, 193, 193, 193, 194, 194, 194, 194, 195,
+195, 195, 195, 196, 196, 196, 196, 197, 197, 197, 197, 198, 198, 198, 198, 199,
+199, 199, 199, 200, 200, 200, 200, 201, 201, 201, 201, 202, 202, 202, 203, 203,
+203, 203, 204, 204, 204, 204, 205, 205, 205, 205, 206, 206, 206, 206, 207, 207,
+207, 207, 208, 208, 208, 208, 209, 209, 209, 209, 210, 210, 210, 210, 210, 210,
+210, 210, 210, 210, 210, 210, 211, 211, 211, 211, 211, 211, 211, 211, 211, 211,
+211, 212, 212, 212, 212, 213, 213, 213, 213, 213, 213, 213, 213, 213, 213, 213,
+213, 214, 214, 214, 214, 215, 215, 215, 215, 215, 215, 215, 215, 215, 215, 215,
+216, 216, 216, 216, 217, 217, 217, 217, 218, 218, 218, 218, 219, 219, 219, 219,
+219, 219, 219, 219, 219, 219, 219, 219, 220, 220, 220, 220, 221, 221, 221, 221,
+221, 221, 221, 221, 221, 221, 221, 222, 222, 222, 222, 223, 223, 223, 223, 223,
+223, 223, 223, 223, 223, 223, 223, 224, 224, 224, 224, 225, 225, 225, 225, 225,
+225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 226, 226,
+226, 226, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 228, 228,
+228, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 230, 230, 230,
+230, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 232, 232, 232,
+232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232,
+233, 233, 233, 233, 234, 234, 234, 234, 234, 234, 234, 234, 234, 234, 234, 235,
+235, 235, 235, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236,
+236, 236, 236, 236, 236, 236, 237, 237, 237, 237, 238, 238, 238, 238, 238, 238,
+238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238,
+238, 238, 238, 238, 238, 239, 239, 239, 239, 240, 240, 240, 240, 240, 240, 240,
+240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240,
+240, 240, 240, 240, 241, 241, 241, 241, 242, 242, 242, 242, 242, 242, 242, 242,
+242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242,
+242, 242, 243, 243, 243, 243, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244,
+244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244,
+244, 245, 245, 245, 245, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
+246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
+246, 246, 246, 246, 246, 246, 246, 247, 247, 247, 247, 248, 248, 248, 248, 248,
+248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248,
+248, 248, 248, 248, 248, 248, 249, 249, 249, 249, 250, 250, 250, 250, 250, 250,
+250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250,
+250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250,
+250, 250, 250, 250, 251, 251, 251, 251, 252, 252, 252, 252, 252, 252, 252, 252,
+252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+252, 252, 252, 252, 252, 252, 252, 252, 253, 253, 253, 253, 253, 253, 253, 253,
+253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253,
+253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253,
+253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253,
+253, 254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c
new file mode 100644
index 0000000..6f8527c
--- /dev/null
+++ b/drivers/media/video/isp/isp.c
@@ -0,0 +1,2221 @@
+/*
+ * isp.c
+ *
+ * TI OMAP3 ISP - Core
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	Sakari Ailus <sakari.ailus@nokia.com>
+ *	David Cohen <david.cohen@nokia.com>
+ *	Stanimir Varbanov <svarbanov@mm-sol.com>
+ *	Vimarsh Zutshi <vimarsh.zutshi@nokia.com>
+ *	Tuukka Toivonen <tuukka.o.toivonen@nokia.com>
+ *	Sergio Aguirre <saaguirre@ti.com>
+ *	Antti Koskipaa <antti.koskipaa@nokia.com>
+ *	Ivan T. Ivanov <iivanov@mm-sol.com>
+ *	RaniSuneela <r-m@ti.com>
+ *	Atanas Filipov <afilipov@mm-sol.com>
+ *	Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
+ *	Hiroshi DOYU <hiroshi.doyu@nokia.com>
+ *	Nayden Kanchev <nkanchev@mm-sol.com>
+ *	Phil Carmody <ext-phil.2.carmody@nokia.com>
+ *	Artem Bityutskiy <artem.bityutskiy@nokia.com>
+ *	Dominic Curran <dcurran@ti.com>
+ *	Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi>
+ *	Pallavi Kulkarni <p-kulkarni@ti.com>
+ *	Vaibhav Hiremath <hvaibhav@ti.com>
+ *	Mohit Jalori <mjalori@ti.com>
+ *	Sameer Venkatraman <sameerv@ti.com>
+ *	Senthilvadivu Guruswamy <svadivu@ti.com>
+ *	Thara Gopinath <thara@ti.com>
+ *	Toni Leinonen <toni.leinonen@nokia.com>
+ *	Troy Laramy <t-laramy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <asm/cacheflush.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispccdc.h"
+#include "isppreview.h"
+#include "ispresizer.h"
+#include "ispcsi2.h"
+#include "ispccp2.h"
+#include "isph3a.h"
+#include "isphist.h"
+
+static unsigned int autoidle;
+module_param(autoidle, int, 0444);
+MODULE_PARM_DESC(autoidle, "Enable OMAP3ISP AUTOIDLE support");
+
+static void isp_save_ctx(struct isp_device *isp);
+
+static void isp_restore_ctx(struct isp_device *isp);
+
+static const struct isp_res_mapping isp_res_maps[] = {
+	{
+		.isp_rev = ISP_REVISION_2_0,
+		.map = 1 << OMAP3_ISP_IOMEM_MAIN |
+		       1 << OMAP3_ISP_IOMEM_CCP2 |
+		       1 << OMAP3_ISP_IOMEM_CCDC |
+		       1 << OMAP3_ISP_IOMEM_HIST |
+		       1 << OMAP3_ISP_IOMEM_H3A |
+		       1 << OMAP3_ISP_IOMEM_PREV |
+		       1 << OMAP3_ISP_IOMEM_RESZ |
+		       1 << OMAP3_ISP_IOMEM_SBL |
+		       1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 |
+		       1 << OMAP3_ISP_IOMEM_CSIPHY2,
+	},
+	{
+		.isp_rev = ISP_REVISION_15_0,
+		.map = 1 << OMAP3_ISP_IOMEM_MAIN |
+		       1 << OMAP3_ISP_IOMEM_CCP2 |
+		       1 << OMAP3_ISP_IOMEM_CCDC |
+		       1 << OMAP3_ISP_IOMEM_HIST |
+		       1 << OMAP3_ISP_IOMEM_H3A |
+		       1 << OMAP3_ISP_IOMEM_PREV |
+		       1 << OMAP3_ISP_IOMEM_RESZ |
+		       1 << OMAP3_ISP_IOMEM_SBL |
+		       1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 |
+		       1 << OMAP3_ISP_IOMEM_CSIPHY2 |
+		       1 << OMAP3_ISP_IOMEM_CSI2A_REGS2 |
+		       1 << OMAP3_ISP_IOMEM_CSI2C_REGS1 |
+		       1 << OMAP3_ISP_IOMEM_CSIPHY1 |
+		       1 << OMAP3_ISP_IOMEM_CSI2C_REGS2,
+	},
+};
+
+/* Structure for saving/restoring ISP module registers */
+static struct isp_reg isp_reg_list[] = {
+	{OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG, 0},
+	{OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, 0},
+	{OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, 0},
+	{0, ISP_TOK_TERM, 0}
+};
+
+/*
+ * omap3isp_flush - Post pending L3 bus writes by doing a register readback
+ * @isp: OMAP3 ISP device
+ *
+ * In order to force posting of pending writes, we need to write and
+ * readback the same register, in this case the revision register.
+ *
+ * See this link for reference:
+ *   http://www.mail-archive.com/linux-omap@vger.kernel.org/msg08149.html
+ */
+void omap3isp_flush(struct isp_device *isp)
+{
+	isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION);
+	isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION);
+}
+
+/*
+ * isp_enable_interrupts - Enable ISP interrupts.
+ * @isp: OMAP3 ISP device
+ */
+static void isp_enable_interrupts(struct isp_device *isp)
+{
+	static const u32 irq = IRQ0ENABLE_CSIA_IRQ
+			     | IRQ0ENABLE_CSIB_IRQ
+			     | IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ
+			     | IRQ0ENABLE_CCDC_LSC_DONE_IRQ
+			     | IRQ0ENABLE_CCDC_VD0_IRQ
+			     | IRQ0ENABLE_CCDC_VD1_IRQ
+			     | IRQ0ENABLE_HS_VS_IRQ
+			     | IRQ0ENABLE_HIST_DONE_IRQ
+			     | IRQ0ENABLE_H3A_AWB_DONE_IRQ
+			     | IRQ0ENABLE_H3A_AF_DONE_IRQ
+			     | IRQ0ENABLE_PRV_DONE_IRQ
+			     | IRQ0ENABLE_RSZ_DONE_IRQ;
+
+	isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
+	isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE);
+}
+
+/*
+ * isp_disable_interrupts - Disable ISP interrupts.
+ * @isp: OMAP3 ISP device
+ */
+static void isp_disable_interrupts(struct isp_device *isp)
+{
+	isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE);
+}
+
+/**
+ * isp_set_xclk - Configures the specified cam_xclk to the desired frequency.
+ * @isp: OMAP3 ISP device
+ * @xclk: Desired frequency of the clock in Hz. 0 = stable low, 1 is stable high
+ * @xclksel: XCLK to configure (0 = A, 1 = B).
+ *
+ * Configures the specified MCLK divisor in the ISP timing control register
+ * (TCTRL_CTRL) to generate the desired xclk clock value.
+ *
+ * Divisor = cam_mclk_hz / xclk
+ *
+ * Returns the final frequency that is actually being generated
+ **/
+static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel)
+{
+	u32 divisor;
+	u32 currentxclk;
+	unsigned long mclk_hz;
+
+	if (!omap3isp_get(isp))
+		return 0;
+
+	mclk_hz = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]);
+
+	if (xclk >= mclk_hz) {
+		divisor = ISPTCTRL_CTRL_DIV_BYPASS;
+		currentxclk = mclk_hz;
+	} else if (xclk >= 2) {
+		divisor = mclk_hz / xclk;
+		if (divisor >= ISPTCTRL_CTRL_DIV_BYPASS)
+			divisor = ISPTCTRL_CTRL_DIV_BYPASS - 1;
+		currentxclk = mclk_hz / divisor;
+	} else {
+		divisor = xclk;
+		currentxclk = 0;
+	}
+
+	switch (xclksel) {
+	case 0:
+		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
+				ISPTCTRL_CTRL_DIVA_MASK,
+				divisor << ISPTCTRL_CTRL_DIVA_SHIFT);
+		dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n",
+			currentxclk);
+		break;
+	case 1:
+		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL,
+				ISPTCTRL_CTRL_DIVB_MASK,
+				divisor << ISPTCTRL_CTRL_DIVB_SHIFT);
+		dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n",
+			currentxclk);
+		break;
+	default:
+		omap3isp_put(isp);
+		dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested "
+			"xclk. Must be 0 (A) or 1 (B).\n");
+		return -EINVAL;
+	}
+
+	/* Do we go from stable whatever to clock? */
+	if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2)
+		omap3isp_get(isp);
+	/* Stopping the clock. */
+	else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2)
+		omap3isp_put(isp);
+
+	isp->xclk_divisor[xclksel] = divisor;
+
+	omap3isp_put(isp);
+
+	return currentxclk;
+}
+
+/*
+ * isp_power_settings - Sysconfig settings, for Power Management.
+ * @isp: OMAP3 ISP device
+ * @idle: Consider idle state.
+ *
+ * Sets the power settings for the ISP, and SBL bus.
+ */
+static void isp_power_settings(struct isp_device *isp, int idle)
+{
+	isp_reg_writel(isp,
+		       ((idle ? ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY :
+				ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY) <<
+			ISP_SYSCONFIG_MIDLEMODE_SHIFT) |
+			((isp->revision == ISP_REVISION_15_0) ?
+                          ISP_SYSCONFIG_AUTOIDLE : 0),
+		       OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG);
+
+	if (isp->autoidle)
+		isp_reg_writel(isp, ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN,
+			       ISP_CTRL);
+}
+
+/*
+ * Configure the bridge and lane shifter. Valid inputs are
+ *
+ * CCDC_INPUT_PARALLEL: Parallel interface
+ * CCDC_INPUT_CSI2A: CSI2a receiver
+ * CCDC_INPUT_CCP2B: CCP2b receiver
+ * CCDC_INPUT_CSI2C: CSI2c receiver
+ *
+ * The bridge and lane shifter are configured according to the selected input
+ * and the ISP platform data.
+ */
+void omap3isp_configure_bridge(struct isp_device *isp,
+			       enum ccdc_input_entity input,
+			       const struct isp_parallel_platform_data *pdata)
+{
+	u32 ispctrl_val;
+
+	ispctrl_val  = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL);
+	ispctrl_val &= ~ISPCTRL_SHIFT_MASK;
+	ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV;
+	ispctrl_val &= ~ISPCTRL_PAR_SER_CLK_SEL_MASK;
+	ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_MASK;
+
+	switch (input) {
+	case CCDC_INPUT_PARALLEL:
+		ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL;
+		ispctrl_val |= pdata->data_lane_shift << ISPCTRL_SHIFT_SHIFT;
+		ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT;
+		ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT;
+		break;
+
+	case CCDC_INPUT_CSI2A:
+		ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIA;
+		break;
+
+	case CCDC_INPUT_CCP2B:
+		ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIB;
+		break;
+
+	case CCDC_INPUT_CSI2C:
+		ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIC;
+		break;
+
+	default:
+		return;
+	}
+
+	ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK;
+	ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE;
+
+	isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL);
+}
+
+/**
+ * isp_set_pixel_clock - Configures the ISP pixel clock
+ * @isp: OMAP3 ISP device
+ * @pixelclk: Average pixel clock in Hz
+ *
+ * Set the average pixel clock required by the sensor. The ISP will use the
+ * lowest possible memory bandwidth settings compatible with the clock.
+ **/
+static void isp_set_pixel_clock(struct isp_device *isp, unsigned int pixelclk)
+{
+	isp->isp_ccdc.vpcfg.pixelclk = pixelclk;
+}
+
+void omap3isp_hist_dma_done(struct isp_device *isp)
+{
+	if (omap3isp_ccdc_busy(&isp->isp_ccdc) ||
+	    omap3isp_stat_pcr_busy(&isp->isp_hist)) {
+		/* Histogram cannot be enabled in this frame anymore */
+		atomic_set(&isp->isp_hist.buf_err, 1);
+		dev_dbg(isp->dev, "hist: Out of synchronization with "
+				  "CCDC. Ignoring next buffer.\n");
+	}
+}
+
+static inline void isp_isr_dbg(struct isp_device *isp, u32 irqstatus)
+{
+	static const char *name[] = {
+		"CSIA_IRQ",
+		"res1",
+		"res2",
+		"CSIB_LCM_IRQ",
+		"CSIB_IRQ",
+		"res5",
+		"res6",
+		"res7",
+		"CCDC_VD0_IRQ",
+		"CCDC_VD1_IRQ",
+		"CCDC_VD2_IRQ",
+		"CCDC_ERR_IRQ",
+		"H3A_AF_DONE_IRQ",
+		"H3A_AWB_DONE_IRQ",
+		"res14",
+		"res15",
+		"HIST_DONE_IRQ",
+		"CCDC_LSC_DONE",
+		"CCDC_LSC_PREFETCH_COMPLETED",
+		"CCDC_LSC_PREFETCH_ERROR",
+		"PRV_DONE_IRQ",
+		"CBUFF_IRQ",
+		"res22",
+		"res23",
+		"RSZ_DONE_IRQ",
+		"OVF_IRQ",
+		"res26",
+		"res27",
+		"MMU_ERR_IRQ",
+		"OCP_ERR_IRQ",
+		"SEC_ERR_IRQ",
+		"HS_VS_IRQ",
+	};
+	int i;
+
+	dev_dbg(isp->dev, "");
+
+	for (i = 0; i < ARRAY_SIZE(name); i++) {
+		if ((1 << i) & irqstatus)
+			printk(KERN_CONT "%s ", name[i]);
+	}
+	printk(KERN_CONT "\n");
+}
+
+static void isp_isr_sbl(struct isp_device *isp)
+{
+	struct device *dev = isp->dev;
+	u32 sbl_pcr;
+
+	/*
+	 * Handle shared buffer logic overflows for video buffers.
+	 * ISPSBL_PCR_CCDCPRV_2_RSZ_OVF can be safely ignored.
+	 */
+	sbl_pcr = isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR);
+	isp_reg_writel(isp, sbl_pcr, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR);
+	sbl_pcr &= ~ISPSBL_PCR_CCDCPRV_2_RSZ_OVF;
+
+	if (sbl_pcr)
+		dev_dbg(dev, "SBL overflow (PCR = 0x%08x)\n", sbl_pcr);
+
+	if (sbl_pcr & (ISPSBL_PCR_CCDC_WBL_OVF | ISPSBL_PCR_CSIA_WBL_OVF
+		     | ISPSBL_PCR_CSIB_WBL_OVF)) {
+		isp->isp_ccdc.error = 1;
+		if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW)
+			isp->isp_prev.error = 1;
+		if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER)
+			isp->isp_res.error = 1;
+	}
+
+	if (sbl_pcr & ISPSBL_PCR_PRV_WBL_OVF) {
+		isp->isp_prev.error = 1;
+		if (isp->isp_res.input == RESIZER_INPUT_VP &&
+		    !(isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER))
+			isp->isp_res.error = 1;
+	}
+
+	if (sbl_pcr & (ISPSBL_PCR_RSZ1_WBL_OVF
+		       | ISPSBL_PCR_RSZ2_WBL_OVF
+		       | ISPSBL_PCR_RSZ3_WBL_OVF
+		       | ISPSBL_PCR_RSZ4_WBL_OVF))
+		isp->isp_res.error = 1;
+
+	if (sbl_pcr & ISPSBL_PCR_H3A_AF_WBL_OVF)
+		omap3isp_stat_sbl_overflow(&isp->isp_af);
+
+	if (sbl_pcr & ISPSBL_PCR_H3A_AEAWB_WBL_OVF)
+		omap3isp_stat_sbl_overflow(&isp->isp_aewb);
+}
+
+/*
+ * isp_isr - Interrupt Service Routine for Camera ISP module.
+ * @irq: Not used currently.
+ * @_isp: Pointer to the OMAP3 ISP device
+ *
+ * Handles the corresponding callback if plugged in.
+ *
+ * Returns IRQ_HANDLED when IRQ was correctly handled, or IRQ_NONE when the
+ * IRQ wasn't handled.
+ */
+static irqreturn_t isp_isr(int irq, void *_isp)
+{
+	static const u32 ccdc_events = IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ |
+				       IRQ0STATUS_CCDC_LSC_DONE_IRQ |
+				       IRQ0STATUS_CCDC_VD0_IRQ |
+				       IRQ0STATUS_CCDC_VD1_IRQ |
+				       IRQ0STATUS_HS_VS_IRQ;
+	struct isp_device *isp = _isp;
+	u32 irqstatus;
+	int ret;
+
+	irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
+	isp_reg_writel(isp, irqstatus, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
+
+	isp_isr_sbl(isp);
+
+	if (irqstatus & IRQ0STATUS_CSIA_IRQ) {
+		ret = omap3isp_csi2_isr(&isp->isp_csi2a);
+		if (ret)
+			isp->isp_ccdc.error = 1;
+	}
+
+	if (irqstatus & IRQ0STATUS_CSIB_IRQ) {
+		ret = omap3isp_ccp2_isr(&isp->isp_ccp2);
+		if (ret)
+			isp->isp_ccdc.error = 1;
+	}
+
+	if (irqstatus & IRQ0STATUS_CCDC_VD0_IRQ) {
+		if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW)
+			omap3isp_preview_isr_frame_sync(&isp->isp_prev);
+		if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER)
+			omap3isp_resizer_isr_frame_sync(&isp->isp_res);
+		omap3isp_stat_isr_frame_sync(&isp->isp_aewb);
+		omap3isp_stat_isr_frame_sync(&isp->isp_af);
+		omap3isp_stat_isr_frame_sync(&isp->isp_hist);
+	}
+
+	if (irqstatus & ccdc_events)
+		omap3isp_ccdc_isr(&isp->isp_ccdc, irqstatus & ccdc_events);
+
+	if (irqstatus & IRQ0STATUS_PRV_DONE_IRQ) {
+		if (isp->isp_prev.output & PREVIEW_OUTPUT_RESIZER)
+			omap3isp_resizer_isr_frame_sync(&isp->isp_res);
+		omap3isp_preview_isr(&isp->isp_prev);
+	}
+
+	if (irqstatus & IRQ0STATUS_RSZ_DONE_IRQ)
+		omap3isp_resizer_isr(&isp->isp_res);
+
+	if (irqstatus & IRQ0STATUS_H3A_AWB_DONE_IRQ)
+		omap3isp_stat_isr(&isp->isp_aewb);
+
+	if (irqstatus & IRQ0STATUS_H3A_AF_DONE_IRQ)
+		omap3isp_stat_isr(&isp->isp_af);
+
+	if (irqstatus & IRQ0STATUS_HIST_DONE_IRQ)
+		omap3isp_stat_isr(&isp->isp_hist);
+
+	omap3isp_flush(isp);
+
+#if defined(DEBUG) && defined(ISP_ISR_DEBUG)
+	isp_isr_dbg(isp, irqstatus);
+#endif
+
+	return IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * Pipeline power management
+ *
+ * Entities must be powered up when part of a pipeline that contains at least
+ * one open video device node.
+ *
+ * To achieve this use the entity use_count field to track the number of users.
+ * For entities corresponding to video device nodes the use_count field stores
+ * the users count of the node. For entities corresponding to subdevs the
+ * use_count field stores the total number of users of all video device nodes
+ * in the pipeline.
+ *
+ * The omap3isp_pipeline_pm_use() function must be called in the open() and
+ * close() handlers of video device nodes. It increments or decrements the use
+ * count of all subdev entities in the pipeline.
+ *
+ * To react to link management on powered pipelines, the link setup notification
+ * callback updates the use count of all entities in the source and sink sides
+ * of the link.
+ */
+
+/*
+ * isp_pipeline_pm_use_count - Count the number of users of a pipeline
+ * @entity: The entity
+ *
+ * Return the total number of users of all video device nodes in the pipeline.
+ */
+static int isp_pipeline_pm_use_count(struct media_entity *entity)
+{
+	struct media_entity_graph graph;
+	int use = 0;
+
+	media_entity_graph_walk_start(&graph, entity);
+
+	while ((entity = media_entity_graph_walk_next(&graph))) {
+		if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE)
+			use += entity->use_count;
+	}
+
+	return use;
+}
+
+/*
+ * isp_pipeline_pm_power_one - Apply power change to an entity
+ * @entity: The entity
+ * @change: Use count change
+ *
+ * Change the entity use count by @change. If the entity is a subdev update its
+ * power state by calling the core::s_power operation when the use count goes
+ * from 0 to != 0 or from != 0 to 0.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+static int isp_pipeline_pm_power_one(struct media_entity *entity, int change)
+{
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	subdev = media_entity_type(entity) == MEDIA_ENT_T_V4L2_SUBDEV
+	       ? media_entity_to_v4l2_subdev(entity) : NULL;
+
+	if (entity->use_count == 0 && change > 0 && subdev != NULL) {
+		ret = v4l2_subdev_call(subdev, core, s_power, 1);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			return ret;
+	}
+
+	entity->use_count += change;
+	WARN_ON(entity->use_count < 0);
+
+	if (entity->use_count == 0 && change < 0 && subdev != NULL)
+		v4l2_subdev_call(subdev, core, s_power, 0);
+
+	return 0;
+}
+
+/*
+ * isp_pipeline_pm_power - Apply power change to all entities in a pipeline
+ * @entity: The entity
+ * @change: Use count change
+ *
+ * Walk the pipeline to update the use count and the power state of all non-node
+ * entities.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+static int isp_pipeline_pm_power(struct media_entity *entity, int change)
+{
+	struct media_entity_graph graph;
+	struct media_entity *first = entity;
+	int ret = 0;
+
+	if (!change)
+		return 0;
+
+	media_entity_graph_walk_start(&graph, entity);
+
+	while (!ret && (entity = media_entity_graph_walk_next(&graph)))
+		if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
+			ret = isp_pipeline_pm_power_one(entity, change);
+
+	if (!ret)
+		return 0;
+
+	media_entity_graph_walk_start(&graph, first);
+
+	while ((first = media_entity_graph_walk_next(&graph))
+	       && first != entity)
+		if (media_entity_type(first) != MEDIA_ENT_T_DEVNODE)
+			isp_pipeline_pm_power_one(first, -change);
+
+	return ret;
+}
+
+/*
+ * omap3isp_pipeline_pm_use - Update the use count of an entity
+ * @entity: The entity
+ * @use: Use (1) or stop using (0) the entity
+ *
+ * Update the use count of all entities in the pipeline and power entities on or
+ * off accordingly.
+ *
+ * Return 0 on success or a negative error code on failure. Powering entities
+ * off is assumed to never fail. No failure can occur when the use parameter is
+ * set to 0.
+ */
+int omap3isp_pipeline_pm_use(struct media_entity *entity, int use)
+{
+	int change = use ? 1 : -1;
+	int ret;
+
+	mutex_lock(&entity->parent->graph_mutex);
+
+	/* Apply use count to node. */
+	entity->use_count += change;
+	WARN_ON(entity->use_count < 0);
+
+	/* Apply power change to connected non-nodes. */
+	ret = isp_pipeline_pm_power(entity, change);
+
+	mutex_unlock(&entity->parent->graph_mutex);
+
+	return ret;
+}
+
+/*
+ * isp_pipeline_link_notify - Link management notification callback
+ * @source: Pad at the start of the link
+ * @sink: Pad at the end of the link
+ * @flags: New link flags that will be applied
+ *
+ * React to link management on powered pipelines by updating the use count of
+ * all entities in the source and sink sides of the link. Entities are powered
+ * on or off accordingly.
+ *
+ * Return 0 on success or a negative error code on failure. Powering entities
+ * off is assumed to never fail. This function will not fail for disconnection
+ * events.
+ */
+static int isp_pipeline_link_notify(struct media_pad *source,
+				    struct media_pad *sink, u32 flags)
+{
+	int source_use = isp_pipeline_pm_use_count(source->entity);
+	int sink_use = isp_pipeline_pm_use_count(sink->entity);
+	int ret;
+
+	if (!(flags & MEDIA_LNK_FL_ENABLED)) {
+		/* Powering off entities is assumed to never fail. */
+		isp_pipeline_pm_power(source->entity, -sink_use);
+		isp_pipeline_pm_power(sink->entity, -source_use);
+		return 0;
+	}
+
+	ret = isp_pipeline_pm_power(source->entity, sink_use);
+	if (ret < 0)
+		return ret;
+
+	ret = isp_pipeline_pm_power(sink->entity, source_use);
+	if (ret < 0)
+		isp_pipeline_pm_power(source->entity, -sink_use);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Pipeline stream management
+ */
+
+/*
+ * isp_pipeline_enable - Enable streaming on a pipeline
+ * @pipe: ISP pipeline
+ * @mode: Stream mode (single shot or continuous)
+ *
+ * Walk the entities chain starting at the pipeline output video node and start
+ * all modules in the chain in the given mode.
+ *
+ * Return 0 if successfull, or the return value of the failed video::s_stream
+ * operation otherwise.
+ */
+static int isp_pipeline_enable(struct isp_pipeline *pipe,
+			       enum isp_pipeline_stream_state mode)
+{
+	struct isp_device *isp = pipe->output->isp;
+	struct media_entity *entity;
+	struct media_pad *pad;
+	struct v4l2_subdev *subdev;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&pipe->lock, flags);
+	pipe->state &= ~(ISP_PIPELINE_IDLE_INPUT | ISP_PIPELINE_IDLE_OUTPUT);
+	spin_unlock_irqrestore(&pipe->lock, flags);
+
+	pipe->do_propagation = false;
+
+	entity = &pipe->output->video.entity;
+	while (1) {
+		pad = &entity->pads[0];
+		if (!(pad->flags & MEDIA_PAD_FL_INPUT))
+			break;
+
+		pad = media_entity_remote_source(pad);
+		if (pad == NULL ||
+		    media_entity_type(pad->entity) !=
+				MEDIA_ENT_T_V4L2_SUBDEV)
+			break;
+
+		entity = pad->entity;
+		subdev = media_entity_to_v4l2_subdev(entity);
+
+		ret = v4l2_subdev_call(subdev, video, s_stream, mode);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			break;
+
+		if (subdev == &isp->isp_ccdc.subdev) {
+			v4l2_subdev_call(&isp->isp_aewb.subdev, video,
+					s_stream, mode);
+			v4l2_subdev_call(&isp->isp_af.subdev, video,
+					s_stream, mode);
+			v4l2_subdev_call(&isp->isp_hist.subdev, video,
+					s_stream, mode);
+			pipe->do_propagation = true;
+		}
+	}
+
+	/* Frame number propagation. In continuous streaming mode the number
+	 * is incremented in the frame start ISR. In mem-to-mem mode
+	 * singleshot is used and frame start IRQs are not available.
+	 * Thus we have to increment the number here.
+	 */
+	if (pipe->do_propagation && mode == ISP_PIPELINE_STREAM_SINGLESHOT)
+		atomic_inc(&pipe->frame_number);
+
+	return ret;
+}
+
+static int isp_pipeline_wait_resizer(struct isp_device *isp)
+{
+	return omap3isp_resizer_busy(&isp->isp_res);
+}
+
+static int isp_pipeline_wait_preview(struct isp_device *isp)
+{
+	return omap3isp_preview_busy(&isp->isp_prev);
+}
+
+static int isp_pipeline_wait_ccdc(struct isp_device *isp)
+{
+	return omap3isp_stat_busy(&isp->isp_af)
+	    || omap3isp_stat_busy(&isp->isp_aewb)
+	    || omap3isp_stat_busy(&isp->isp_hist)
+	    || omap3isp_ccdc_busy(&isp->isp_ccdc);
+}
+
+#define ISP_STOP_TIMEOUT	msecs_to_jiffies(1000)
+
+static int isp_pipeline_wait(struct isp_device *isp,
+			     int(*busy)(struct isp_device *isp))
+{
+	unsigned long timeout = jiffies + ISP_STOP_TIMEOUT;
+
+	while (!time_after(jiffies, timeout)) {
+		if (!busy(isp))
+			return 0;
+	}
+
+	return 1;
+}
+
+/*
+ * isp_pipeline_disable - Disable streaming on a pipeline
+ * @pipe: ISP pipeline
+ *
+ * Walk the entities chain starting at the pipeline output video node and stop
+ * all modules in the chain. Wait synchronously for the modules to be stopped if
+ * necessary.
+ *
+ * Return 0 if all modules have been properly stopped, or -ETIMEDOUT if a module
+ * can't be stopped (in which case a software reset of the ISP is probably
+ * necessary).
+ */
+static int isp_pipeline_disable(struct isp_pipeline *pipe)
+{
+	struct isp_device *isp = pipe->output->isp;
+	struct media_entity *entity;
+	struct media_pad *pad;
+	struct v4l2_subdev *subdev;
+	int failure = 0;
+	int ret;
+
+	/*
+	 * We need to stop all the modules after CCDC first or they'll
+	 * never stop since they may not get a full frame from CCDC.
+	 */
+	entity = &pipe->output->video.entity;
+	while (1) {
+		pad = &entity->pads[0];
+		if (!(pad->flags & MEDIA_PAD_FL_INPUT))
+			break;
+
+		pad = media_entity_remote_source(pad);
+		if (pad == NULL ||
+		    media_entity_type(pad->entity) !=
+				MEDIA_ENT_T_V4L2_SUBDEV)
+			break;
+
+		entity = pad->entity;
+		subdev = media_entity_to_v4l2_subdev(entity);
+
+		if (subdev == &isp->isp_ccdc.subdev) {
+			v4l2_subdev_call(&isp->isp_aewb.subdev,
+					 video, s_stream, 0);
+			v4l2_subdev_call(&isp->isp_af.subdev,
+					 video, s_stream, 0);
+			v4l2_subdev_call(&isp->isp_hist.subdev,
+					 video, s_stream, 0);
+		}
+
+		v4l2_subdev_call(subdev, video, s_stream, 0);
+
+		if (subdev == &isp->isp_res.subdev) {
+			ret = isp_pipeline_wait(isp, isp_pipeline_wait_resizer);
+		} else if (subdev == &isp->isp_prev.subdev) {
+			ret = isp_pipeline_wait(isp, isp_pipeline_wait_preview);
+		} else if (subdev == &isp->isp_ccdc.subdev) {
+			ret = isp_pipeline_wait(isp, isp_pipeline_wait_ccdc);
+		} else {
+			ret = 0;
+		}
+
+		if (ret) {
+			dev_info(isp->dev, "Unable to stop %s\n", subdev->name);
+			failure = -ETIMEDOUT;
+		}
+	}
+
+	return failure;
+}
+
+/*
+ * omap3isp_pipeline_set_stream - Enable/disable streaming on a pipeline
+ * @pipe: ISP pipeline
+ * @state: Stream state (stopped, single shot or continuous)
+ *
+ * Set the pipeline to the given stream state. Pipelines can be started in
+ * single-shot or continuous mode.
+ *
+ * Return 0 if successfull, or the return value of the failed video::s_stream
+ * operation otherwise.
+ */
+int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
+				 enum isp_pipeline_stream_state state)
+{
+	int ret;
+
+	if (state == ISP_PIPELINE_STREAM_STOPPED)
+		ret = isp_pipeline_disable(pipe);
+	else
+		ret = isp_pipeline_enable(pipe, state);
+	pipe->stream_state = state;
+
+	return ret;
+}
+
+/*
+ * isp_pipeline_resume - Resume streaming on a pipeline
+ * @pipe: ISP pipeline
+ *
+ * Resume video output and input and re-enable pipeline.
+ */
+static void isp_pipeline_resume(struct isp_pipeline *pipe)
+{
+	int singleshot = pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT;
+
+	omap3isp_video_resume(pipe->output, !singleshot);
+	if (singleshot)
+		omap3isp_video_resume(pipe->input, 0);
+	isp_pipeline_enable(pipe, pipe->stream_state);
+}
+
+/*
+ * isp_pipeline_suspend - Suspend streaming on a pipeline
+ * @pipe: ISP pipeline
+ *
+ * Suspend pipeline.
+ */
+static void isp_pipeline_suspend(struct isp_pipeline *pipe)
+{
+	isp_pipeline_disable(pipe);
+}
+
+/*
+ * isp_pipeline_is_last - Verify if entity has an enbled link to the output
+ * 			  video node
+ * @me: ISP module's media entity
+ *
+ * Returns 1 if the entity has an enabled link to the output video node or 0
+ * otherwise. It's true only while pipeline can have no more than one output
+ * node.
+ */
+static int isp_pipeline_is_last(struct media_entity *me)
+{
+	struct isp_pipeline *pipe;
+	struct media_pad *pad;
+
+	if (!me->pipe)
+		return 0;
+	pipe = to_isp_pipeline(me);
+	if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED)
+		return 0;
+	pad = media_entity_remote_source(&pipe->output->pad);
+	return pad->entity == me;
+}
+
+/*
+ * isp_suspend_module_pipeline - Suspend pipeline to which belongs the module
+ * @me: ISP module's media entity
+ *
+ * Suspend the whole pipeline if module's entity has an enabled link to the
+ * output video node. It works only while pipeline can have no more than one
+ * output node.
+ */
+static void isp_suspend_module_pipeline(struct media_entity *me)
+{
+	if (isp_pipeline_is_last(me))
+		isp_pipeline_suspend(to_isp_pipeline(me));
+}
+
+/*
+ * isp_resume_module_pipeline - Resume pipeline to which belongs the module
+ * @me: ISP module's media entity
+ *
+ * Resume the whole pipeline if module's entity has an enabled link to the
+ * output video node. It works only while pipeline can have no more than one
+ * output node.
+ */
+static void isp_resume_module_pipeline(struct media_entity *me)
+{
+	if (isp_pipeline_is_last(me))
+		isp_pipeline_resume(to_isp_pipeline(me));
+}
+
+/*
+ * isp_suspend_modules - Suspend ISP submodules.
+ * @isp: OMAP3 ISP device
+ *
+ * Returns 0 if suspend left in idle state all the submodules properly,
+ * or returns 1 if a general Reset is required to suspend the submodules.
+ */
+static int isp_suspend_modules(struct isp_device *isp)
+{
+	unsigned long timeout;
+
+	omap3isp_stat_suspend(&isp->isp_aewb);
+	omap3isp_stat_suspend(&isp->isp_af);
+	omap3isp_stat_suspend(&isp->isp_hist);
+	isp_suspend_module_pipeline(&isp->isp_res.subdev.entity);
+	isp_suspend_module_pipeline(&isp->isp_prev.subdev.entity);
+	isp_suspend_module_pipeline(&isp->isp_ccdc.subdev.entity);
+	isp_suspend_module_pipeline(&isp->isp_csi2a.subdev.entity);
+	isp_suspend_module_pipeline(&isp->isp_ccp2.subdev.entity);
+
+	timeout = jiffies + ISP_STOP_TIMEOUT;
+	while (omap3isp_stat_busy(&isp->isp_af)
+	    || omap3isp_stat_busy(&isp->isp_aewb)
+	    || omap3isp_stat_busy(&isp->isp_hist)
+	    || omap3isp_preview_busy(&isp->isp_prev)
+	    || omap3isp_resizer_busy(&isp->isp_res)
+	    || omap3isp_ccdc_busy(&isp->isp_ccdc)) {
+		if (time_after(jiffies, timeout)) {
+			dev_info(isp->dev, "can't stop modules.\n");
+			return 1;
+		}
+		msleep(1);
+	}
+
+	return 0;
+}
+
+/*
+ * isp_resume_modules - Resume ISP submodules.
+ * @isp: OMAP3 ISP device
+ */
+static void isp_resume_modules(struct isp_device *isp)
+{
+	omap3isp_stat_resume(&isp->isp_aewb);
+	omap3isp_stat_resume(&isp->isp_af);
+	omap3isp_stat_resume(&isp->isp_hist);
+	isp_resume_module_pipeline(&isp->isp_res.subdev.entity);
+	isp_resume_module_pipeline(&isp->isp_prev.subdev.entity);
+	isp_resume_module_pipeline(&isp->isp_ccdc.subdev.entity);
+	isp_resume_module_pipeline(&isp->isp_csi2a.subdev.entity);
+	isp_resume_module_pipeline(&isp->isp_ccp2.subdev.entity);
+}
+
+/*
+ * isp_reset - Reset ISP with a timeout wait for idle.
+ * @isp: OMAP3 ISP device
+ */
+static int isp_reset(struct isp_device *isp)
+{
+	unsigned long timeout = 0;
+
+	isp_reg_writel(isp,
+		       isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG)
+		       | ISP_SYSCONFIG_SOFTRESET,
+		       OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG);
+	while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN,
+			       ISP_SYSSTATUS) & 0x1)) {
+		if (timeout++ > 10000) {
+			dev_alert(isp->dev, "cannot reset ISP\n");
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	return 0;
+}
+
+/*
+ * isp_save_context - Saves the values of the ISP module registers.
+ * @isp: OMAP3 ISP device
+ * @reg_list: Structure containing pairs of register address and value to
+ *            modify on OMAP.
+ */
+static void
+isp_save_context(struct isp_device *isp, struct isp_reg *reg_list)
+{
+	struct isp_reg *next = reg_list;
+
+	for (; next->reg != ISP_TOK_TERM; next++)
+		next->val = isp_reg_readl(isp, next->mmio_range, next->reg);
+}
+
+/*
+ * isp_restore_context - Restores the values of the ISP module registers.
+ * @isp: OMAP3 ISP device
+ * @reg_list: Structure containing pairs of register address and value to
+ *            modify on OMAP.
+ */
+static void
+isp_restore_context(struct isp_device *isp, struct isp_reg *reg_list)
+{
+	struct isp_reg *next = reg_list;
+
+	for (; next->reg != ISP_TOK_TERM; next++)
+		isp_reg_writel(isp, next->val, next->mmio_range, next->reg);
+}
+
+/*
+ * isp_save_ctx - Saves ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context.
+ * @isp: OMAP3 ISP device
+ *
+ * Routine for saving the context of each module in the ISP.
+ * CCDC, HIST, H3A, PREV, RESZ and MMU.
+ */
+static void isp_save_ctx(struct isp_device *isp)
+{
+	isp_save_context(isp, isp_reg_list);
+	if (isp->iommu)
+		iommu_save_ctx(isp->iommu);
+}
+
+/*
+ * isp_restore_ctx - Restores ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context.
+ * @isp: OMAP3 ISP device
+ *
+ * Routine for restoring the context of each module in the ISP.
+ * CCDC, HIST, H3A, PREV, RESZ and MMU.
+ */
+static void isp_restore_ctx(struct isp_device *isp)
+{
+	isp_restore_context(isp, isp_reg_list);
+	if (isp->iommu)
+		iommu_restore_ctx(isp->iommu);
+	omap3isp_ccdc_restore_context(isp);
+	omap3isp_preview_restore_context(isp);
+}
+
+/* -----------------------------------------------------------------------------
+ * SBL resources management
+ */
+#define OMAP3_ISP_SBL_READ	(OMAP3_ISP_SBL_CSI1_READ | \
+				 OMAP3_ISP_SBL_CCDC_LSC_READ | \
+				 OMAP3_ISP_SBL_PREVIEW_READ | \
+				 OMAP3_ISP_SBL_RESIZER_READ)
+#define OMAP3_ISP_SBL_WRITE	(OMAP3_ISP_SBL_CSI1_WRITE | \
+				 OMAP3_ISP_SBL_CSI2A_WRITE | \
+				 OMAP3_ISP_SBL_CSI2C_WRITE | \
+				 OMAP3_ISP_SBL_CCDC_WRITE | \
+				 OMAP3_ISP_SBL_PREVIEW_WRITE)
+
+void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res)
+{
+	u32 sbl = 0;
+
+	isp->sbl_resources |= res;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ)
+		sbl |= ISPCTRL_SBL_SHARED_RPORTA;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ)
+		sbl |= ISPCTRL_SBL_SHARED_RPORTB;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE)
+		sbl |= ISPCTRL_SBL_SHARED_WPORTC;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE)
+		sbl |= ISPCTRL_SBL_WR0_RAM_EN;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_WRITE)
+		sbl |= ISPCTRL_SBL_WR1_RAM_EN;
+
+	if (isp->sbl_resources & OMAP3_ISP_SBL_READ)
+		sbl |= ISPCTRL_SBL_RD_RAM_EN;
+
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl);
+}
+
+void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res)
+{
+	u32 sbl = 0;
+
+	isp->sbl_resources &= ~res;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ))
+		sbl |= ISPCTRL_SBL_SHARED_RPORTA;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ))
+		sbl |= ISPCTRL_SBL_SHARED_RPORTB;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE))
+		sbl |= ISPCTRL_SBL_SHARED_WPORTC;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE))
+		sbl |= ISPCTRL_SBL_WR0_RAM_EN;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_WRITE))
+		sbl |= ISPCTRL_SBL_WR1_RAM_EN;
+
+	if (!(isp->sbl_resources & OMAP3_ISP_SBL_READ))
+		sbl |= ISPCTRL_SBL_RD_RAM_EN;
+
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl);
+}
+
+/*
+ * isp_module_sync_idle - Helper to sync module with its idle state
+ * @me: ISP submodule's media entity
+ * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization
+ * @stopping: flag which tells module wants to stop
+ *
+ * This function checks if ISP submodule needs to wait for next interrupt. If
+ * yes, makes the caller to sleep while waiting for such event.
+ */
+int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait,
+			      atomic_t *stopping)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(me);
+
+	if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED ||
+	    (pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT &&
+	     !isp_pipeline_ready(pipe)))
+		return 0;
+
+	/*
+	 * atomic_set() doesn't include memory barrier on ARM platform for SMP
+	 * scenario. We'll call it here to avoid race conditions.
+	 */
+	atomic_set(stopping, 1);
+	smp_mb();
+
+	/*
+	 * If module is the last one, it's writing to memory. In this case,
+	 * it's necessary to check if the module is already paused due to
+	 * DMA queue underrun or if it has to wait for next interrupt to be
+	 * idle.
+	 * If it isn't the last one, the function won't sleep but *stopping
+	 * will still be set to warn next submodule caller's interrupt the
+	 * module wants to be idle.
+	 */
+	if (isp_pipeline_is_last(me)) {
+		struct isp_video *video = pipe->output;
+		unsigned long flags;
+		spin_lock_irqsave(&video->queue->irqlock, flags);
+		if (video->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) {
+			spin_unlock_irqrestore(&video->queue->irqlock, flags);
+			atomic_set(stopping, 0);
+			smp_mb();
+			return 0;
+		}
+		spin_unlock_irqrestore(&video->queue->irqlock, flags);
+		if (!wait_event_timeout(*wait, !atomic_read(stopping),
+					msecs_to_jiffies(1000))) {
+			atomic_set(stopping, 0);
+			smp_mb();
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * omap3isp_module_sync_is_stopped - Helper to verify if module was stopping
+ * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization
+ * @stopping: flag which tells module wants to stop
+ *
+ * This function checks if ISP submodule was stopping. In case of yes, it
+ * notices the caller by setting stopping to 0 and waking up the wait queue.
+ * Returns 1 if it was stopping or 0 otherwise.
+ */
+int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait,
+				     atomic_t *stopping)
+{
+	if (atomic_cmpxchg(stopping, 1, 0)) {
+		wake_up(wait);
+		return 1;
+	}
+
+	return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * Clock management
+ */
+
+#define ISPCTRL_CLKS_MASK	(ISPCTRL_H3A_CLK_EN | \
+				 ISPCTRL_HIST_CLK_EN | \
+				 ISPCTRL_RSZ_CLK_EN | \
+				 (ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN) | \
+				 (ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN))
+
+static void __isp_subclk_update(struct isp_device *isp)
+{
+	u32 clk = 0;
+
+	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_H3A)
+		clk |= ISPCTRL_H3A_CLK_EN;
+
+	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_HIST)
+		clk |= ISPCTRL_HIST_CLK_EN;
+
+	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_RESIZER)
+		clk |= ISPCTRL_RSZ_CLK_EN;
+
+	/* NOTE: For CCDC & Preview submodules, we need to affect internal
+	 *       RAM aswell.
+	 */
+	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC)
+		clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN;
+
+	if (isp->subclk_resources & OMAP3_ISP_SUBCLK_PREVIEW)
+		clk |= ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN;
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+			ISPCTRL_CLKS_MASK, clk);
+}
+
+void omap3isp_subclk_enable(struct isp_device *isp,
+			    enum isp_subclk_resource res)
+{
+	isp->subclk_resources |= res;
+
+	__isp_subclk_update(isp);
+}
+
+void omap3isp_subclk_disable(struct isp_device *isp,
+			     enum isp_subclk_resource res)
+{
+	isp->subclk_resources &= ~res;
+
+	__isp_subclk_update(isp);
+}
+
+/*
+ * isp_enable_clocks - Enable ISP clocks
+ * @isp: OMAP3 ISP device
+ *
+ * Return 0 if successful, or clk_enable return value if any of tthem fails.
+ */
+static int isp_enable_clocks(struct isp_device *isp)
+{
+	int r;
+	unsigned long rate;
+	int divisor;
+
+	/*
+	 * cam_mclk clock chain:
+	 *   dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk
+	 *
+	 * In OMAP3630 dpll4_m5x2 != 2 x dpll4_m5 but both are
+	 * set to the same value. Hence the rate set for dpll4_m5
+	 * has to be twice of what is set on OMAP3430 to get
+	 * the required value for cam_mclk
+	 */
+	if (cpu_is_omap3630())
+		divisor = 1;
+	else
+		divisor = 2;
+
+	r = clk_enable(isp->clock[ISP_CLK_CAM_ICK]);
+	if (r) {
+		dev_err(isp->dev, "clk_enable cam_ick failed\n");
+		goto out_clk_enable_ick;
+	}
+	r = clk_set_rate(isp->clock[ISP_CLK_DPLL4_M5_CK],
+			 CM_CAM_MCLK_HZ/divisor);
+	if (r) {
+		dev_err(isp->dev, "clk_set_rate for dpll4_m5_ck failed\n");
+		goto out_clk_enable_mclk;
+	}
+	r = clk_enable(isp->clock[ISP_CLK_CAM_MCLK]);
+	if (r) {
+		dev_err(isp->dev, "clk_enable cam_mclk failed\n");
+		goto out_clk_enable_mclk;
+	}
+	rate = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]);
+	if (rate != CM_CAM_MCLK_HZ)
+		dev_warn(isp->dev, "unexpected cam_mclk rate:\n"
+				   " expected : %d\n"
+				   " actual   : %ld\n", CM_CAM_MCLK_HZ, rate);
+	r = clk_enable(isp->clock[ISP_CLK_CSI2_FCK]);
+	if (r) {
+		dev_err(isp->dev, "clk_enable csi2_fck failed\n");
+		goto out_clk_enable_csi2_fclk;
+	}
+	return 0;
+
+out_clk_enable_csi2_fclk:
+	clk_disable(isp->clock[ISP_CLK_CAM_MCLK]);
+out_clk_enable_mclk:
+	clk_disable(isp->clock[ISP_CLK_CAM_ICK]);
+out_clk_enable_ick:
+	return r;
+}
+
+/*
+ * isp_disable_clocks - Disable ISP clocks
+ * @isp: OMAP3 ISP device
+ */
+static void isp_disable_clocks(struct isp_device *isp)
+{
+	clk_disable(isp->clock[ISP_CLK_CAM_ICK]);
+	clk_disable(isp->clock[ISP_CLK_CAM_MCLK]);
+	clk_disable(isp->clock[ISP_CLK_CSI2_FCK]);
+}
+
+static const char *isp_clocks[] = {
+	"cam_ick",
+	"cam_mclk",
+	"dpll4_m5_ck",
+	"csi2_96m_fck",
+	"l3_ick",
+};
+
+static void isp_put_clocks(struct isp_device *isp)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) {
+		if (isp->clock[i]) {
+			clk_put(isp->clock[i]);
+			isp->clock[i] = NULL;
+		}
+	}
+}
+
+static int isp_get_clocks(struct isp_device *isp)
+{
+	struct clk *clk;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) {
+		clk = clk_get(isp->dev, isp_clocks[i]);
+		if (IS_ERR(clk)) {
+			dev_err(isp->dev, "clk_get %s failed\n", isp_clocks[i]);
+			isp_put_clocks(isp);
+			return PTR_ERR(clk);
+		}
+
+		isp->clock[i] = clk;
+	}
+
+	return 0;
+}
+
+/*
+ * omap3isp_get - Acquire the ISP resource.
+ *
+ * Initializes the clocks for the first acquire.
+ *
+ * Increment the reference count on the ISP. If the first reference is taken,
+ * enable clocks and power-up all submodules.
+ *
+ * Return a pointer to the ISP device structure, or NULL if an error occured.
+ */
+struct isp_device *omap3isp_get(struct isp_device *isp)
+{
+	struct isp_device *__isp = isp;
+
+	if (isp == NULL)
+		return NULL;
+
+	mutex_lock(&isp->isp_mutex);
+	if (isp->ref_count > 0)
+		goto out;
+
+	if (isp_enable_clocks(isp) < 0) {
+		__isp = NULL;
+		goto out;
+	}
+
+	/* We don't want to restore context before saving it! */
+	if (isp->has_context)
+		isp_restore_ctx(isp);
+	else
+		isp->has_context = 1;
+
+	isp_enable_interrupts(isp);
+
+out:
+	if (__isp != NULL)
+		isp->ref_count++;
+	mutex_unlock(&isp->isp_mutex);
+
+	return __isp;
+}
+
+/*
+ * omap3isp_put - Release the ISP
+ *
+ * Decrement the reference count on the ISP. If the last reference is released,
+ * power-down all submodules, disable clocks and free temporary buffers.
+ */
+void omap3isp_put(struct isp_device *isp)
+{
+	if (isp == NULL)
+		return;
+
+	mutex_lock(&isp->isp_mutex);
+	BUG_ON(isp->ref_count == 0);
+	if (--isp->ref_count == 0) {
+		isp_disable_interrupts(isp);
+		isp_save_ctx(isp);
+		isp_disable_clocks(isp);
+	}
+	mutex_unlock(&isp->isp_mutex);
+}
+
+/* --------------------------------------------------------------------------
+ * Platform device driver
+ */
+
+/*
+ * omap3isp_print_status - Prints the values of the ISP Control Module registers
+ * @isp: OMAP3 ISP device
+ */
+#define ISP_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###ISP " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_##name))
+#define SBL_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###SBL " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_##name))
+
+void omap3isp_print_status(struct isp_device *isp)
+{
+	dev_dbg(isp->dev, "-------------ISP Register dump--------------\n");
+
+	ISP_PRINT_REGISTER(isp, SYSCONFIG);
+	ISP_PRINT_REGISTER(isp, SYSSTATUS);
+	ISP_PRINT_REGISTER(isp, IRQ0ENABLE);
+	ISP_PRINT_REGISTER(isp, IRQ0STATUS);
+	ISP_PRINT_REGISTER(isp, TCTRL_GRESET_LENGTH);
+	ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_REPLAY);
+	ISP_PRINT_REGISTER(isp, CTRL);
+	ISP_PRINT_REGISTER(isp, TCTRL_CTRL);
+	ISP_PRINT_REGISTER(isp, TCTRL_FRAME);
+	ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_DELAY);
+	ISP_PRINT_REGISTER(isp, TCTRL_STRB_DELAY);
+	ISP_PRINT_REGISTER(isp, TCTRL_SHUT_DELAY);
+	ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_LENGTH);
+	ISP_PRINT_REGISTER(isp, TCTRL_STRB_LENGTH);
+	ISP_PRINT_REGISTER(isp, TCTRL_SHUT_LENGTH);
+
+	SBL_PRINT_REGISTER(isp, PCR);
+	SBL_PRINT_REGISTER(isp, SDR_REQ_EXP);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * Power management support.
+ *
+ * As the ISP can't properly handle an input video stream interruption on a non
+ * frame boundary, the ISP pipelines need to be stopped before sensors get
+ * suspended. However, as suspending the sensors can require a running clock,
+ * which can be provided by the ISP, the ISP can't be completely suspended
+ * before the sensor.
+ *
+ * To solve this problem power management support is split into prepare/complete
+ * and suspend/resume operations. The pipelines are stopped in prepare() and the
+ * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in
+ * resume(), and the the pipelines are restarted in complete().
+ *
+ * TODO: PM dependencies between the ISP and sensors are not modeled explicitly
+ * yet.
+ */
+static int isp_pm_prepare(struct device *dev)
+{
+	struct isp_device *isp = dev_get_drvdata(dev);
+	int reset;
+
+	WARN_ON(mutex_is_locked(&isp->isp_mutex));
+
+	if (isp->ref_count == 0)
+		return 0;
+
+	reset = isp_suspend_modules(isp);
+	isp_disable_interrupts(isp);
+	isp_save_ctx(isp);
+	if (reset)
+		isp_reset(isp);
+
+	return 0;
+}
+
+static int isp_pm_suspend(struct device *dev)
+{
+	struct isp_device *isp = dev_get_drvdata(dev);
+
+	WARN_ON(mutex_is_locked(&isp->isp_mutex));
+
+	if (isp->ref_count)
+		isp_disable_clocks(isp);
+
+	return 0;
+}
+
+static int isp_pm_resume(struct device *dev)
+{
+	struct isp_device *isp = dev_get_drvdata(dev);
+
+	if (isp->ref_count == 0)
+		return 0;
+
+	return isp_enable_clocks(isp);
+}
+
+static void isp_pm_complete(struct device *dev)
+{
+	struct isp_device *isp = dev_get_drvdata(dev);
+
+	if (isp->ref_count == 0)
+		return;
+
+	isp_restore_ctx(isp);
+	isp_enable_interrupts(isp);
+	isp_resume_modules(isp);
+}
+
+#else
+
+#define isp_pm_prepare	NULL
+#define isp_pm_suspend	NULL
+#define isp_pm_resume	NULL
+#define isp_pm_complete	NULL
+
+#endif /* CONFIG_PM */
+
+static void isp_unregister_entities(struct isp_device *isp)
+{
+	omap3isp_csi2_unregister_entities(&isp->isp_csi2a);
+	omap3isp_ccp2_unregister_entities(&isp->isp_ccp2);
+	omap3isp_ccdc_unregister_entities(&isp->isp_ccdc);
+	omap3isp_preview_unregister_entities(&isp->isp_prev);
+	omap3isp_resizer_unregister_entities(&isp->isp_res);
+	omap3isp_stat_unregister_entities(&isp->isp_aewb);
+	omap3isp_stat_unregister_entities(&isp->isp_af);
+	omap3isp_stat_unregister_entities(&isp->isp_hist);
+
+	v4l2_device_unregister(&isp->v4l2_dev);
+	media_device_unregister(&isp->media_dev);
+}
+
+/*
+ * isp_register_subdev_group - Register a group of subdevices
+ * @isp: OMAP3 ISP device
+ * @board_info: I2C subdevs board information array
+ *
+ * Register all I2C subdevices in the board_info array. The array must be
+ * terminated by a NULL entry, and the first entry must be the sensor.
+ *
+ * Return a pointer to the sensor media entity if it has been successfully
+ * registered, or NULL otherwise.
+ */
+static struct v4l2_subdev *
+isp_register_subdev_group(struct isp_device *isp,
+		     struct isp_subdev_i2c_board_info *board_info)
+{
+	struct v4l2_subdev *sensor = NULL;
+	unsigned int first;
+
+	if (board_info->board_info == NULL)
+		return NULL;
+
+	for (first = 1; board_info->board_info; ++board_info, first = 0) {
+		struct v4l2_subdev *subdev;
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(board_info->i2c_adapter_id);
+		if (adapter == NULL) {
+			printk(KERN_ERR "%s: Unable to get I2C adapter %d for "
+				"device %s\n", __func__,
+				board_info->i2c_adapter_id,
+				board_info->board_info->type);
+			continue;
+		}
+
+		subdev = v4l2_i2c_new_subdev_board(&isp->v4l2_dev, adapter,
+				board_info->board_info, NULL, 1);
+		if (subdev == NULL) {
+			printk(KERN_ERR "%s: Unable to register subdev %s\n",
+				__func__, board_info->board_info->type);
+			continue;
+		}
+
+		if (first)
+			sensor = subdev;
+	}
+
+	return sensor;
+}
+
+static int isp_register_entities(struct isp_device *isp)
+{
+	struct isp_platform_data *pdata = isp->pdata;
+	struct isp_v4l2_subdevs_group *subdevs;
+	int ret;
+
+	isp->media_dev.dev = isp->dev;
+	strlcpy(isp->media_dev.model, "TI OMAP3 ISP",
+		sizeof(isp->media_dev.model));
+	isp->media_dev.link_notify = isp_pipeline_link_notify;
+	ret = media_device_register(&isp->media_dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: Media device registration failed (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	isp->v4l2_dev.mdev = &isp->media_dev;
+	ret = v4l2_device_register(isp->dev, &isp->v4l2_dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s: V4L2 device registration failed (%d)\n",
+			__func__, ret);
+		goto done;
+	}
+
+	/* Register internal entities */
+	ret = omap3isp_ccp2_register_entities(&isp->isp_ccp2, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_csi2_register_entities(&isp->isp_csi2a, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_ccdc_register_entities(&isp->isp_ccdc, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_preview_register_entities(&isp->isp_prev,
+						 &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_resizer_register_entities(&isp->isp_res, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_stat_register_entities(&isp->isp_aewb, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_stat_register_entities(&isp->isp_af, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = omap3isp_stat_register_entities(&isp->isp_hist, &isp->v4l2_dev);
+	if (ret < 0)
+		goto done;
+
+	/* Register external entities */
+	for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) {
+		struct v4l2_subdev *sensor;
+		struct media_entity *input;
+		unsigned int flags;
+		unsigned int pad;
+
+		sensor = isp_register_subdev_group(isp, subdevs->subdevs);
+		if (sensor == NULL)
+			continue;
+
+		sensor->host_priv = subdevs;
+
+		/* Connect the sensor to the correct interface module. Parallel
+		 * sensors are connected directly to the CCDC, while serial
+		 * sensors are connected to the CSI2a, CCP2b or CSI2c receiver
+		 * through CSIPHY1 or CSIPHY2.
+		 */
+		switch (subdevs->interface) {
+		case ISP_INTERFACE_PARALLEL:
+			input = &isp->isp_ccdc.subdev.entity;
+			pad = CCDC_PAD_SINK;
+			flags = 0;
+			break;
+
+		case ISP_INTERFACE_CSI2A_PHY2:
+			input = &isp->isp_csi2a.subdev.entity;
+			pad = CSI2_PAD_SINK;
+			flags = MEDIA_LNK_FL_IMMUTABLE
+			      | MEDIA_LNK_FL_ENABLED;
+			break;
+
+		case ISP_INTERFACE_CCP2B_PHY1:
+		case ISP_INTERFACE_CCP2B_PHY2:
+			input = &isp->isp_ccp2.subdev.entity;
+			pad = CCP2_PAD_SINK;
+			flags = 0;
+			break;
+
+		case ISP_INTERFACE_CSI2C_PHY1:
+			input = &isp->isp_csi2c.subdev.entity;
+			pad = CSI2_PAD_SINK;
+			flags = MEDIA_LNK_FL_IMMUTABLE
+			      | MEDIA_LNK_FL_ENABLED;
+			break;
+
+		default:
+			printk(KERN_ERR "%s: invalid interface type %u\n",
+			       __func__, subdevs->interface);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		ret = media_entity_create_link(&sensor->entity, 0, input, pad,
+					       flags);
+		if (ret < 0)
+			goto done;
+	}
+
+done:
+	if (ret < 0)
+		isp_unregister_entities(isp);
+
+	return ret;
+}
+
+static void isp_cleanup_modules(struct isp_device *isp)
+{
+	omap3isp_h3a_aewb_cleanup(isp);
+	omap3isp_h3a_af_cleanup(isp);
+	omap3isp_hist_cleanup(isp);
+	omap3isp_resizer_cleanup(isp);
+	omap3isp_preview_cleanup(isp);
+	omap3isp_ccdc_cleanup(isp);
+	omap3isp_ccp2_cleanup(isp);
+	omap3isp_csi2_cleanup(isp);
+}
+
+static int isp_initialize_modules(struct isp_device *isp)
+{
+	int ret;
+
+	ret = omap3isp_csiphy_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "CSI PHY initialization failed\n");
+		goto error_csiphy;
+	}
+
+	ret = omap3isp_csi2_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "CSI2 initialization failed\n");
+		goto error_csi2;
+	}
+
+	ret = omap3isp_ccp2_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "CCP2 initialization failed\n");
+		goto error_ccp2;
+	}
+
+	ret = omap3isp_ccdc_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "CCDC initialization failed\n");
+		goto error_ccdc;
+	}
+
+	ret = omap3isp_preview_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "Preview initialization failed\n");
+		goto error_preview;
+	}
+
+	ret = omap3isp_resizer_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "Resizer initialization failed\n");
+		goto error_resizer;
+	}
+
+	ret = omap3isp_hist_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "Histogram initialization failed\n");
+		goto error_hist;
+	}
+
+	ret = omap3isp_h3a_aewb_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "H3A AEWB initialization failed\n");
+		goto error_h3a_aewb;
+	}
+
+	ret = omap3isp_h3a_af_init(isp);
+	if (ret < 0) {
+		dev_err(isp->dev, "H3A AF initialization failed\n");
+		goto error_h3a_af;
+	}
+
+	/* Connect the submodules. */
+	ret = media_entity_create_link(
+			&isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE,
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccp2.subdev.entity, CCP2_PAD_SOURCE,
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP,
+			&isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF,
+			&isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_prev.subdev.entity, PREV_PAD_SOURCE,
+			&isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP,
+			&isp->isp_aewb.subdev.entity, 0,
+			MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP,
+			&isp->isp_af.subdev.entity, 0,
+			MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(
+			&isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP,
+			&isp->isp_hist.subdev.entity, 0,
+			MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+	if (ret < 0)
+		goto error_link;
+
+	return 0;
+
+error_link:
+	omap3isp_h3a_af_cleanup(isp);
+error_h3a_af:
+	omap3isp_h3a_aewb_cleanup(isp);
+error_h3a_aewb:
+	omap3isp_hist_cleanup(isp);
+error_hist:
+	omap3isp_resizer_cleanup(isp);
+error_resizer:
+	omap3isp_preview_cleanup(isp);
+error_preview:
+	omap3isp_ccdc_cleanup(isp);
+error_ccdc:
+	omap3isp_ccp2_cleanup(isp);
+error_ccp2:
+	omap3isp_csi2_cleanup(isp);
+error_csi2:
+error_csiphy:
+	return ret;
+}
+
+/*
+ * isp_remove - Remove ISP platform device
+ * @pdev: Pointer to ISP platform device
+ *
+ * Always returns 0.
+ */
+static int isp_remove(struct platform_device *pdev)
+{
+	struct isp_device *isp = platform_get_drvdata(pdev);
+	int i;
+
+	isp_unregister_entities(isp);
+	isp_cleanup_modules(isp);
+
+	omap3isp_get(isp);
+	iommu_put(isp->iommu);
+	omap3isp_put(isp);
+
+	free_irq(isp->irq_num, isp);
+	isp_put_clocks(isp);
+
+	for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) {
+		if (isp->mmio_base[i]) {
+			iounmap(isp->mmio_base[i]);
+			isp->mmio_base[i] = NULL;
+		}
+
+		if (isp->mmio_base_phys[i]) {
+			release_mem_region(isp->mmio_base_phys[i],
+					   isp->mmio_size[i]);
+			isp->mmio_base_phys[i] = 0;
+		}
+	}
+
+	regulator_put(isp->isp_csiphy1.vdd);
+	regulator_put(isp->isp_csiphy2.vdd);
+	kfree(isp);
+
+	return 0;
+}
+
+static int isp_map_mem_resource(struct platform_device *pdev,
+				struct isp_device *isp,
+				enum isp_mem_resources res)
+{
+	struct resource *mem;
+
+	/* request the mem region for the camera registers */
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, res);
+	if (!mem) {
+		dev_err(isp->dev, "no mem resource?\n");
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+		dev_err(isp->dev,
+			"cannot reserve camera register I/O region\n");
+		return -ENODEV;
+	}
+	isp->mmio_base_phys[res] = mem->start;
+	isp->mmio_size[res] = resource_size(mem);
+
+	/* map the region */
+	isp->mmio_base[res] = ioremap_nocache(isp->mmio_base_phys[res],
+					      isp->mmio_size[res]);
+	if (!isp->mmio_base[res]) {
+		dev_err(isp->dev, "cannot map camera register I/O region\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ * isp_probe - Probe ISP platform device
+ * @pdev: Pointer to ISP platform device
+ *
+ * Returns 0 if successful,
+ *   -ENOMEM if no memory available,
+ *   -ENODEV if no platform device resources found
+ *     or no space for remapping registers,
+ *   -EINVAL if couldn't install ISR,
+ *   or clk_get return error value.
+ */
+static int isp_probe(struct platform_device *pdev)
+{
+	struct isp_platform_data *pdata = pdev->dev.platform_data;
+	struct isp_device *isp;
+	int ret;
+	int i, m;
+
+	if (pdata == NULL)
+		return -EINVAL;
+
+	isp = kzalloc(sizeof(*isp), GFP_KERNEL);
+	if (!isp) {
+		dev_err(&pdev->dev, "could not allocate memory\n");
+		return -ENOMEM;
+	}
+
+	isp->autoidle = autoidle;
+	isp->platform_cb.set_xclk = isp_set_xclk;
+	isp->platform_cb.set_pixel_clock = isp_set_pixel_clock;
+
+	mutex_init(&isp->isp_mutex);
+	spin_lock_init(&isp->stat_lock);
+
+	isp->dev = &pdev->dev;
+	isp->pdata = pdata;
+	isp->ref_count = 0;
+
+	isp->raw_dmamask = DMA_BIT_MASK(32);
+	isp->dev->dma_mask = &isp->raw_dmamask;
+	isp->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	platform_set_drvdata(pdev, isp);
+
+	/* Regulators */
+	isp->isp_csiphy1.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY1");
+	isp->isp_csiphy2.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY2");
+
+	/* Clocks */
+	ret = isp_map_mem_resource(pdev, isp, OMAP3_ISP_IOMEM_MAIN);
+	if (ret < 0)
+		goto error;
+
+	ret = isp_get_clocks(isp);
+	if (ret < 0)
+		goto error;
+
+	if (omap3isp_get(isp) == NULL)
+		goto error;
+
+	ret = isp_reset(isp);
+	if (ret < 0)
+		goto error_isp;
+
+	/* Memory resources */
+	isp->revision = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION);
+	dev_info(isp->dev, "Revision %d.%d found\n",
+		 (isp->revision & 0xf0) >> 4, isp->revision & 0x0f);
+
+	for (m = 0; m < ARRAY_SIZE(isp_res_maps); m++)
+		if (isp->revision == isp_res_maps[m].isp_rev)
+			break;
+
+	if (m == ARRAY_SIZE(isp_res_maps)) {
+		dev_err(isp->dev, "No resource map found for ISP rev %d.%d\n",
+			(isp->revision & 0xf0) >> 4, isp->revision & 0xf);
+		ret = -ENODEV;
+		goto error_isp;
+	}
+
+	for (i = 1; i < OMAP3_ISP_IOMEM_LAST; i++) {
+		if (isp_res_maps[m].map & 1 << i) {
+			ret = isp_map_mem_resource(pdev, isp, i);
+			if (ret)
+				goto error_isp;
+		}
+	}
+
+	/* IOMMU */
+	isp->iommu = iommu_get("isp");
+	if (IS_ERR_OR_NULL(isp->iommu)) {
+		isp->iommu = NULL;
+		ret = -ENODEV;
+		goto error_isp;
+	}
+
+	/* Interrupt */
+	isp->irq_num = platform_get_irq(pdev, 0);
+	if (isp->irq_num <= 0) {
+		dev_err(isp->dev, "No IRQ resource\n");
+		ret = -ENODEV;
+		goto error_isp;
+	}
+
+	if (request_irq(isp->irq_num, isp_isr, IRQF_SHARED, "OMAP3 ISP", isp)) {
+		dev_err(isp->dev, "Unable to request IRQ\n");
+		ret = -EINVAL;
+		goto error_isp;
+	}
+
+	/* Entities */
+	ret = isp_initialize_modules(isp);
+	if (ret < 0)
+		goto error_irq;
+
+	ret = isp_register_entities(isp);
+	if (ret < 0)
+		goto error_modules;
+
+	isp_power_settings(isp, 1);
+	omap3isp_put(isp);
+
+	return 0;
+
+error_modules:
+	isp_cleanup_modules(isp);
+error_irq:
+	free_irq(isp->irq_num, isp);
+error_isp:
+	iommu_put(isp->iommu);
+	omap3isp_put(isp);
+error:
+	isp_put_clocks(isp);
+
+	for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) {
+		if (isp->mmio_base[i]) {
+			iounmap(isp->mmio_base[i]);
+			isp->mmio_base[i] = NULL;
+		}
+
+		if (isp->mmio_base_phys[i]) {
+			release_mem_region(isp->mmio_base_phys[i],
+					   isp->mmio_size[i]);
+			isp->mmio_base_phys[i] = 0;
+		}
+	}
+	regulator_put(isp->isp_csiphy2.vdd);
+	regulator_put(isp->isp_csiphy1.vdd);
+	platform_set_drvdata(pdev, NULL);
+	kfree(isp);
+
+	return ret;
+}
+
+static const struct dev_pm_ops omap3isp_pm_ops = {
+	.prepare = isp_pm_prepare,
+	.suspend = isp_pm_suspend,
+	.resume = isp_pm_resume,
+	.complete = isp_pm_complete,
+};
+
+static struct platform_device_id omap3isp_id_table[] = {
+	{ "omap3isp", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, omap3isp_id_table);
+
+static struct platform_driver omap3isp_driver = {
+	.probe = isp_probe,
+	.remove = isp_remove,
+	.id_table = omap3isp_id_table,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "omap3isp",
+		.pm	= &omap3isp_pm_ops,
+	},
+};
+
+/*
+ * isp_init - ISP module initialization.
+ */
+static int __init isp_init(void)
+{
+	return platform_driver_register(&omap3isp_driver);
+}
+
+/*
+ * isp_cleanup - ISP module cleanup.
+ */
+static void __exit isp_cleanup(void)
+{
+	platform_driver_unregister(&omap3isp_driver);
+}
+
+module_init(isp_init);
+module_exit(isp_cleanup);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("TI OMAP3 ISP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/isp/isp.h b/drivers/media/video/isp/isp.h
new file mode 100644
index 0000000..44590a5
--- /dev/null
+++ b/drivers/media/video/isp/isp.h
@@ -0,0 +1,427 @@
+/*
+ * isp.h
+ *
+ * TI OMAP3 ISP - Core
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_CORE_H
+#define OMAP3_ISP_CORE_H
+
+#include <media/v4l2-device.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
+
+#include "ispstat.h"
+#include "ispccdc.h"
+#include "ispreg.h"
+#include "ispresizer.h"
+#include "isppreview.h"
+#include "ispcsiphy.h"
+#include "ispcsi2.h"
+#include "ispccp2.h"
+
+#define IOMMU_FLAG (IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_8)
+
+#define ISP_TOK_TERM		0xFFFFFFFF	/*
+						 * terminating token for ISP
+						 * modules reg list
+						 */
+#define to_isp_device(ptr_module)				\
+	container_of(ptr_module, struct isp_device, isp_##ptr_module)
+#define to_device(ptr_module)						\
+	(to_isp_device(ptr_module)->dev)
+
+enum isp_mem_resources {
+	OMAP3_ISP_IOMEM_MAIN,
+	OMAP3_ISP_IOMEM_CCP2,
+	OMAP3_ISP_IOMEM_CCDC,
+	OMAP3_ISP_IOMEM_HIST,
+	OMAP3_ISP_IOMEM_H3A,
+	OMAP3_ISP_IOMEM_PREV,
+	OMAP3_ISP_IOMEM_RESZ,
+	OMAP3_ISP_IOMEM_SBL,
+	OMAP3_ISP_IOMEM_CSI2A_REGS1,
+	OMAP3_ISP_IOMEM_CSIPHY2,
+	OMAP3_ISP_IOMEM_CSI2A_REGS2,
+	OMAP3_ISP_IOMEM_CSI2C_REGS1,
+	OMAP3_ISP_IOMEM_CSIPHY1,
+	OMAP3_ISP_IOMEM_CSI2C_REGS2,
+	OMAP3_ISP_IOMEM_LAST
+};
+
+enum isp_sbl_resource {
+	OMAP3_ISP_SBL_CSI1_READ		= 0x1,
+	OMAP3_ISP_SBL_CSI1_WRITE	= 0x2,
+	OMAP3_ISP_SBL_CSI2A_WRITE	= 0x4,
+	OMAP3_ISP_SBL_CSI2C_WRITE	= 0x8,
+	OMAP3_ISP_SBL_CCDC_LSC_READ	= 0x10,
+	OMAP3_ISP_SBL_CCDC_WRITE	= 0x20,
+	OMAP3_ISP_SBL_PREVIEW_READ	= 0x40,
+	OMAP3_ISP_SBL_PREVIEW_WRITE	= 0x80,
+	OMAP3_ISP_SBL_RESIZER_READ	= 0x100,
+	OMAP3_ISP_SBL_RESIZER_WRITE	= 0x200,
+};
+
+enum isp_subclk_resource {
+	OMAP3_ISP_SUBCLK_CCDC		= (1 << 0),
+	OMAP3_ISP_SUBCLK_H3A		= (1 << 1),
+	OMAP3_ISP_SUBCLK_HIST		= (1 << 2),
+	OMAP3_ISP_SUBCLK_PREVIEW	= (1 << 3),
+	OMAP3_ISP_SUBCLK_RESIZER	= (1 << 4),
+};
+
+enum isp_interface_type {
+	ISP_INTERFACE_PARALLEL,
+	ISP_INTERFACE_CSI2A_PHY2,
+	ISP_INTERFACE_CCP2B_PHY1,
+	ISP_INTERFACE_CCP2B_PHY2,
+	ISP_INTERFACE_CSI2C_PHY1,
+};
+
+#define ISP_REVISION_1_0		0x10
+#define ISP_REVISION_2_0		0x20
+#define ISP_REVISION_15_0		0xF0
+
+/*
+ * struct isp_res_mapping - Map ISP io resources to ISP revision.
+ * @isp_rev: ISP_REVISION_x_x
+ * @map: bitmap for enum isp_mem_resources
+ */
+struct isp_res_mapping {
+	u32 isp_rev;
+	u32 map;
+};
+
+/*
+ * struct isp_reg - Structure for ISP register values.
+ * @reg: 32-bit Register address.
+ * @val: 32-bit Register value.
+ */
+struct isp_reg {
+	enum isp_mem_resources mmio_range;
+	u32 reg;
+	u32 val;
+};
+
+/**
+ * struct isp_parallel_platform_data - Parallel interface platform data
+ * @width: Parallel bus width in bits (8, 10, 11 or 12)
+ * @data_lane_shift: Data lane shifter
+ *		0 - CAMEXT[13:0] -> CAM[13:0]
+ *		1 - CAMEXT[13:2] -> CAM[11:0]
+ *		2 - CAMEXT[13:4] -> CAM[9:0]
+ *		3 - CAMEXT[13:6] -> CAM[7:0]
+ * @clk_pol: Pixel clock polarity
+ *		0 - Non Inverted, 1 - Inverted
+ * @bridge: CCDC Bridge input control
+ *		ISPCTRL_PAR_BRIDGE_DISABLE - Disable
+ *		ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian
+ *		ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian
+ */
+struct isp_parallel_platform_data {
+	unsigned int width;
+	unsigned int data_lane_shift:2;
+	unsigned int clk_pol:1;
+	unsigned int bridge:4;
+};
+
+/**
+ * struct isp_ccp2_platform_data - CCP2 interface platform data
+ * @strobe_clk_pol: Strobe/clock polarity
+ *		0 - Non Inverted, 1 - Inverted
+ * @crc: Enable the cyclic redundancy check
+ * @ccp2_mode: Enable CCP2 compatibility mode
+ *		0 - MIPI-CSI1 mode, 1 - CCP2 mode
+ * @phy_layer: Physical layer selection
+ *		ISPCCP2_CTRL_PHY_SEL_CLOCK - Data/clock physical layer
+ *		ISPCCP2_CTRL_PHY_SEL_STROBE - Data/strobe physical layer
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_ccp2_platform_data {
+	unsigned int strobe_clk_pol:1;
+	unsigned int crc:1;
+	unsigned int ccp2_mode:1;
+	unsigned int phy_layer:1;
+	unsigned int vpclk_div:2;
+};
+
+/**
+ * struct isp_csi2_platform_data - CSI2 interface platform data
+ * @crc: Enable the cyclic redundancy check
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_csi2_platform_data {
+	unsigned crc:1;
+	unsigned vpclk_div:2;
+};
+
+struct isp_subdev_i2c_board_info {
+	struct i2c_board_info *board_info;
+	int i2c_adapter_id;
+};
+
+struct isp_v4l2_subdevs_group {
+	struct isp_subdev_i2c_board_info *subdevs;
+	enum isp_interface_type interface;
+	union {
+		struct isp_parallel_platform_data parallel;
+		struct isp_ccp2_platform_data ccp2;
+		struct isp_csi2_platform_data csi2;
+	} bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
+};
+
+struct isp_platform_data {
+	struct isp_v4l2_subdevs_group *subdevs;
+};
+
+struct isp_platform_callback {
+	u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel);
+	int (*csiphy_config)(struct isp_csiphy *phy,
+			     struct isp_csiphy_dphy_cfg *dphy,
+			     struct isp_csiphy_lanes_cfg *lanes);
+	void (*set_pixel_clock)(struct isp_device *isp, unsigned int pixelclk);
+};
+
+/*
+ * struct isp_device - ISP device structure.
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @revision: Stores current ISP module revision.
+ * @irq_num: Currently used IRQ number.
+ * @mmio_base: Array with kernel base addresses for ioremapped ISP register
+ *             regions.
+ * @mmio_base_phys: Array with physical L4 bus addresses for ISP register
+ *                  regions.
+ * @mmio_size: Array with ISP register regions size in bytes.
+ * @raw_dmamask: Raw DMA mask
+ * @stat_lock: Spinlock for handling statistics
+ * @isp_mutex: Mutex for serializing requests to ISP.
+ * @has_context: Context has been saved at least once and can be restored.
+ * @ref_count: Reference count for handling multiple ISP requests.
+ * @cam_ick: Pointer to camera interface clock structure.
+ * @cam_mclk: Pointer to camera functional clock structure.
+ * @dpll4_m5_ck: Pointer to DPLL4 M5 clock structure.
+ * @csi2_fck: Pointer to camera CSI2 complexIO clock structure.
+ * @l3_ick: Pointer to OMAP3 L3 bus interface clock.
+ * @irq: Currently attached ISP ISR callbacks information structure.
+ * @isp_af: Pointer to current settings for ISP AutoFocus SCM.
+ * @isp_hist: Pointer to current settings for ISP Histogram SCM.
+ * @isp_h3a: Pointer to current settings for ISP Auto Exposure and
+ *           White Balance SCM.
+ * @isp_res: Pointer to current settings for ISP Resizer.
+ * @isp_prev: Pointer to current settings for ISP Preview.
+ * @isp_ccdc: Pointer to current settings for ISP CCDC.
+ * @iommu: Pointer to requested IOMMU instance for ISP.
+ * @platform_cb: ISP driver callback function pointers for platform code
+ *
+ * This structure is used to store the OMAP ISP Information.
+ */
+struct isp_device {
+	struct v4l2_device v4l2_dev;
+	struct media_device media_dev;
+	struct device *dev;
+	u32 revision;
+
+	/* platform HW resources */
+	struct isp_platform_data *pdata;
+	unsigned int irq_num;
+
+	void __iomem *mmio_base[OMAP3_ISP_IOMEM_LAST];
+	unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_LAST];
+	resource_size_t mmio_size[OMAP3_ISP_IOMEM_LAST];
+
+	u64 raw_dmamask;
+
+	/* ISP Obj */
+	spinlock_t stat_lock;	/* common lock for statistic drivers */
+	struct mutex isp_mutex;	/* For handling ref_count field */
+	int has_context;
+	int ref_count;
+	unsigned int autoidle;
+	u32 xclk_divisor[2];	/* Two clocks, a and b. */
+#define ISP_CLK_CAM_ICK		0
+#define ISP_CLK_CAM_MCLK	1
+#define ISP_CLK_DPLL4_M5_CK	2
+#define ISP_CLK_CSI2_FCK	3
+#define ISP_CLK_L3_ICK		4
+	struct clk *clock[5];
+
+	/* ISP modules */
+	struct ispstat isp_af;
+	struct ispstat isp_aewb;
+	struct ispstat isp_hist;
+	struct isp_res_device isp_res;
+	struct isp_prev_device isp_prev;
+	struct isp_ccdc_device isp_ccdc;
+	struct isp_csi2_device isp_csi2a;
+	struct isp_csi2_device isp_csi2c;
+	struct isp_ccp2_device isp_ccp2;
+	struct isp_csiphy isp_csiphy1;
+	struct isp_csiphy isp_csiphy2;
+
+	unsigned int sbl_resources;
+	unsigned int subclk_resources;
+
+	struct iommu *iommu;
+
+	struct isp_platform_callback platform_cb;
+};
+
+#define v4l2_dev_to_isp_device(dev) \
+	container_of(dev, struct isp_device, v4l2_dev)
+
+void omap3isp_hist_dma_done(struct isp_device *isp);
+
+void omap3isp_flush(struct isp_device *isp);
+
+int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait,
+			      atomic_t *stopping);
+
+int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait,
+				     atomic_t *stopping);
+
+int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
+				 enum isp_pipeline_stream_state state);
+void omap3isp_configure_bridge(struct isp_device *isp,
+			       enum ccdc_input_entity input,
+			       const struct isp_parallel_platform_data *pdata);
+
+#define ISP_XCLK_NONE			-1
+#define ISP_XCLK_A			0
+#define ISP_XCLK_B			1
+
+struct isp_device *omap3isp_get(struct isp_device *isp);
+void omap3isp_put(struct isp_device *isp);
+
+void omap3isp_print_status(struct isp_device *isp);
+
+void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res);
+void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res);
+
+void omap3isp_subclk_enable(struct isp_device *isp,
+			    enum isp_subclk_resource res);
+void omap3isp_subclk_disable(struct isp_device *isp,
+			     enum isp_subclk_resource res);
+
+int omap3isp_pipeline_pm_use(struct media_entity *entity, int use);
+
+int omap3isp_register_entities(struct platform_device *pdev,
+			       struct v4l2_device *v4l2_dev);
+void omap3isp_unregister_entities(struct platform_device *pdev);
+
+/*
+ * isp_reg_readl - Read value of an OMAP3 ISP register
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @isp_mmio_range: Range to which the register offset refers to.
+ * @reg_offset: Register offset to read from.
+ *
+ * Returns an unsigned 32 bit value with the required register contents.
+ */
+static inline
+u32 isp_reg_readl(struct isp_device *isp, enum isp_mem_resources isp_mmio_range,
+		  u32 reg_offset)
+{
+	return __raw_readl(isp->mmio_base[isp_mmio_range] + reg_offset);
+}
+
+/*
+ * isp_reg_writel - Write value to an OMAP3 ISP register
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @reg_value: 32 bit value to write to the register.
+ * @isp_mmio_range: Range to which the register offset refers to.
+ * @reg_offset: Register offset to write into.
+ */
+static inline
+void isp_reg_writel(struct isp_device *isp, u32 reg_value,
+		    enum isp_mem_resources isp_mmio_range, u32 reg_offset)
+{
+	__raw_writel(reg_value, isp->mmio_base[isp_mmio_range] + reg_offset);
+}
+
+/*
+ * isp_reg_and - Clear individual bits in an OMAP3 ISP register
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @mmio_range: Range to which the register offset refers to.
+ * @reg: Register offset to work on.
+ * @clr_bits: 32 bit value which would be cleared in the register.
+ */
+static inline
+void isp_reg_clr(struct isp_device *isp, enum isp_mem_resources mmio_range,
+		 u32 reg, u32 clr_bits)
+{
+	u32 v = isp_reg_readl(isp, mmio_range, reg);
+
+	isp_reg_writel(isp, v & ~clr_bits, mmio_range, reg);
+}
+
+/*
+ * isp_reg_set - Set individual bits in an OMAP3 ISP register
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @mmio_range: Range to which the register offset refers to.
+ * @reg: Register offset to work on.
+ * @set_bits: 32 bit value which would be set in the register.
+ */
+static inline
+void isp_reg_set(struct isp_device *isp, enum isp_mem_resources mmio_range,
+		 u32 reg, u32 set_bits)
+{
+	u32 v = isp_reg_readl(isp, mmio_range, reg);
+
+	isp_reg_writel(isp, v | set_bits, mmio_range, reg);
+}
+
+/*
+ * isp_reg_clr_set - Clear and set invidial bits in an OMAP3 ISP register
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @mmio_range: Range to which the register offset refers to.
+ * @reg: Register offset to work on.
+ * @clr_bits: 32 bit value which would be cleared in the register.
+ * @set_bits: 32 bit value which would be set in the register.
+ *
+ * The clear operation is done first, and then the set operation.
+ */
+static inline
+void isp_reg_clr_set(struct isp_device *isp, enum isp_mem_resources mmio_range,
+		     u32 reg, u32 clr_bits, u32 set_bits)
+{
+	u32 v = isp_reg_readl(isp, mmio_range, reg);
+
+	isp_reg_writel(isp, (v & ~clr_bits) | set_bits, mmio_range, reg);
+}
+
+static inline enum v4l2_buf_type
+isp_pad_buffer_type(const struct v4l2_subdev *subdev, int pad)
+{
+	if (pad >= subdev->entity.num_pads)
+		return 0;
+
+	if (subdev->entity.pads[pad].flags & MEDIA_PAD_FL_INPUT)
+		return V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	else
+		return V4L2_BUF_TYPE_VIDEO_CAPTURE;
+}
+
+#endif	/* OMAP3_ISP_CORE_H */
diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c
new file mode 100644
index 0000000..cb71e4f
--- /dev/null
+++ b/drivers/media/video/isp/ispccdc.c
@@ -0,0 +1,2280 @@
+/*
+ * ispccdc.c
+ *
+ * TI OMAP3 ISP - CCDC module
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispccdc.h"
+
+static struct v4l2_mbus_framefmt *
+__ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh,
+		  unsigned int pad, enum v4l2_subdev_format_whence which);
+
+static const unsigned int ccdc_fmts[] = {
+	V4L2_MBUS_FMT_Y8_1X8,
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SRGGB10_1X10,
+	V4L2_MBUS_FMT_SBGGR10_1X10,
+	V4L2_MBUS_FMT_SGBRG10_1X10,
+	V4L2_MBUS_FMT_SGRBG12_1X12,
+	V4L2_MBUS_FMT_SRGGB12_1X12,
+	V4L2_MBUS_FMT_SBGGR12_1X12,
+	V4L2_MBUS_FMT_SGBRG12_1X12,
+};
+
+/*
+ * ccdc_print_status - Print current CCDC Module register values.
+ * @ccdc: Pointer to ISP CCDC device.
+ *
+ * Also prints other debug information stored in the CCDC module.
+ */
+#define CCDC_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###CCDC " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_##name))
+
+static void ccdc_print_status(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	dev_dbg(isp->dev, "-------------CCDC Register dump-------------\n");
+
+	CCDC_PRINT_REGISTER(isp, PCR);
+	CCDC_PRINT_REGISTER(isp, SYN_MODE);
+	CCDC_PRINT_REGISTER(isp, HD_VD_WID);
+	CCDC_PRINT_REGISTER(isp, PIX_LINES);
+	CCDC_PRINT_REGISTER(isp, HORZ_INFO);
+	CCDC_PRINT_REGISTER(isp, VERT_START);
+	CCDC_PRINT_REGISTER(isp, VERT_LINES);
+	CCDC_PRINT_REGISTER(isp, CULLING);
+	CCDC_PRINT_REGISTER(isp, HSIZE_OFF);
+	CCDC_PRINT_REGISTER(isp, SDOFST);
+	CCDC_PRINT_REGISTER(isp, SDR_ADDR);
+	CCDC_PRINT_REGISTER(isp, CLAMP);
+	CCDC_PRINT_REGISTER(isp, DCSUB);
+	CCDC_PRINT_REGISTER(isp, COLPTN);
+	CCDC_PRINT_REGISTER(isp, BLKCMP);
+	CCDC_PRINT_REGISTER(isp, FPC);
+	CCDC_PRINT_REGISTER(isp, FPC_ADDR);
+	CCDC_PRINT_REGISTER(isp, VDINT);
+	CCDC_PRINT_REGISTER(isp, ALAW);
+	CCDC_PRINT_REGISTER(isp, REC656IF);
+	CCDC_PRINT_REGISTER(isp, CFG);
+	CCDC_PRINT_REGISTER(isp, FMTCFG);
+	CCDC_PRINT_REGISTER(isp, FMT_HORZ);
+	CCDC_PRINT_REGISTER(isp, FMT_VERT);
+	CCDC_PRINT_REGISTER(isp, PRGEVEN0);
+	CCDC_PRINT_REGISTER(isp, PRGEVEN1);
+	CCDC_PRINT_REGISTER(isp, PRGODD0);
+	CCDC_PRINT_REGISTER(isp, PRGODD1);
+	CCDC_PRINT_REGISTER(isp, VP_OUT);
+	CCDC_PRINT_REGISTER(isp, LSC_CONFIG);
+	CCDC_PRINT_REGISTER(isp, LSC_INITIAL);
+	CCDC_PRINT_REGISTER(isp, LSC_TABLE_BASE);
+	CCDC_PRINT_REGISTER(isp, LSC_TABLE_OFFSET);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * omap3isp_ccdc_busy - Get busy state of the CCDC.
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+int omap3isp_ccdc_busy(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR) &
+		ISPCCDC_PCR_BUSY;
+}
+
+/* -----------------------------------------------------------------------------
+ * Lens Shading Compensation
+ */
+
+/*
+ * ccdc_lsc_validate_config - Check that LSC configuration is valid.
+ * @ccdc: Pointer to ISP CCDC device.
+ * @lsc_cfg: the LSC configuration to check.
+ *
+ * Returns 0 if the LSC configuration is valid, or -EINVAL if invalid.
+ */
+static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc,
+				    struct omap3isp_ccdc_lsc_config *lsc_cfg)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	struct v4l2_mbus_framefmt *format;
+	unsigned int paxel_width, paxel_height;
+	unsigned int paxel_shift_x, paxel_shift_y;
+	unsigned int min_width, min_height, min_size;
+	unsigned int input_width, input_height;
+
+	paxel_shift_x = lsc_cfg->gain_mode_m;
+	paxel_shift_y = lsc_cfg->gain_mode_n;
+
+	if ((paxel_shift_x < 2) || (paxel_shift_x > 6) ||
+	    (paxel_shift_y < 2) || (paxel_shift_y > 6)) {
+		dev_dbg(isp->dev, "CCDC: LSC: Invalid paxel size\n");
+		return -EINVAL;
+	}
+
+	if (lsc_cfg->offset & 3) {
+		dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of "
+			"4\n");
+		return -EINVAL;
+	}
+
+	if ((lsc_cfg->initial_x & 1) || (lsc_cfg->initial_y & 1)) {
+		dev_dbg(isp->dev, "CCDC: LSC: initial_x and y must be even\n");
+		return -EINVAL;
+	}
+
+	format = __ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK,
+				   V4L2_SUBDEV_FORMAT_ACTIVE);
+	input_width = format->width;
+	input_height = format->height;
+
+	/* Calculate minimum bytesize for validation */
+	paxel_width = 1 << paxel_shift_x;
+	min_width = ((input_width + lsc_cfg->initial_x + paxel_width - 1)
+		     >> paxel_shift_x) + 1;
+
+	paxel_height = 1 << paxel_shift_y;
+	min_height = ((input_height + lsc_cfg->initial_y + paxel_height - 1)
+		     >> paxel_shift_y) + 1;
+
+	min_size = 4 * min_width * min_height;
+	if (min_size > lsc_cfg->size) {
+		dev_dbg(isp->dev, "CCDC: LSC: too small table\n");
+		return -EINVAL;
+	}
+	if (lsc_cfg->offset < (min_width * 4)) {
+		dev_dbg(isp->dev, "CCDC: LSC: Offset is too small\n");
+		return -EINVAL;
+	}
+	if ((lsc_cfg->size / lsc_cfg->offset) < min_height) {
+		dev_dbg(isp->dev, "CCDC: LSC: Wrong size/offset combination\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * ccdc_lsc_program_table - Program Lens Shading Compensation table address.
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_lsc_program_table(struct isp_ccdc_device *ccdc, u32 addr)
+{
+	isp_reg_writel(to_isp_device(ccdc), addr,
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_BASE);
+}
+
+/*
+ * ccdc_lsc_setup_regs - Configures the lens shading compensation module
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_lsc_setup_regs(struct isp_ccdc_device *ccdc,
+				struct omap3isp_ccdc_lsc_config *cfg)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	int reg;
+
+	isp_reg_writel(isp, cfg->offset, OMAP3_ISP_IOMEM_CCDC,
+		       ISPCCDC_LSC_TABLE_OFFSET);
+
+	reg = 0;
+	reg |= cfg->gain_mode_n << ISPCCDC_LSC_GAIN_MODE_N_SHIFT;
+	reg |= cfg->gain_mode_m << ISPCCDC_LSC_GAIN_MODE_M_SHIFT;
+	reg |= cfg->gain_format << ISPCCDC_LSC_GAIN_FORMAT_SHIFT;
+	isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG);
+
+	reg = 0;
+	reg &= ~ISPCCDC_LSC_INITIAL_X_MASK;
+	reg |= cfg->initial_x << ISPCCDC_LSC_INITIAL_X_SHIFT;
+	reg &= ~ISPCCDC_LSC_INITIAL_Y_MASK;
+	reg |= cfg->initial_y << ISPCCDC_LSC_INITIAL_Y_SHIFT;
+	isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC,
+		       ISPCCDC_LSC_INITIAL);
+}
+
+static int ccdc_lsc_wait_prefetch(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	unsigned int wait;
+
+	isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ,
+		       OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
+
+	/* timeout 1 ms */
+	for (wait = 0; wait < 1000; wait++) {
+		if (isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS) &
+				  IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ) {
+			isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ,
+				       OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
+			return 0;
+		}
+
+		rmb();
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * __ccdc_lsc_enable - Enables/Disables the Lens Shading Compensation module.
+ * @ccdc: Pointer to ISP CCDC device.
+ * @enable: 0 Disables LSC, 1 Enables LSC.
+ */
+static int __ccdc_lsc_enable(struct isp_ccdc_device *ccdc, int enable)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	const struct v4l2_mbus_framefmt *format =
+		__ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK,
+				  V4L2_SUBDEV_FORMAT_ACTIVE);
+
+	if ((format->code != V4L2_MBUS_FMT_SGRBG10_1X10) &&
+	    (format->code != V4L2_MBUS_FMT_SRGGB10_1X10) &&
+	    (format->code != V4L2_MBUS_FMT_SBGGR10_1X10) &&
+	    (format->code != V4L2_MBUS_FMT_SGBRG10_1X10))
+		return -EINVAL;
+
+	if (enable)
+		omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_LSC_READ);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG,
+			ISPCCDC_LSC_ENABLE, enable ? ISPCCDC_LSC_ENABLE : 0);
+
+	if (enable) {
+		if (ccdc_lsc_wait_prefetch(ccdc) < 0) {
+			isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC,
+				    ISPCCDC_LSC_CONFIG, ISPCCDC_LSC_ENABLE);
+			ccdc->lsc.state = LSC_STATE_STOPPED;
+			dev_warn(to_device(ccdc), "LSC prefecth timeout\n");
+			return -ETIMEDOUT;
+		}
+		ccdc->lsc.state = LSC_STATE_RUNNING;
+	} else {
+		ccdc->lsc.state = LSC_STATE_STOPPING;
+	}
+
+	return 0;
+}
+
+static int ccdc_lsc_busy(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG) &
+			     ISPCCDC_LSC_BUSY;
+}
+
+/* __ccdc_lsc_configure - Apply a new configuration to the LSC engine
+ * @ccdc: Pointer to ISP CCDC device
+ * @req: New configuration request
+ *
+ * context: in_interrupt()
+ */
+static int __ccdc_lsc_configure(struct isp_ccdc_device *ccdc,
+				struct ispccdc_lsc_config_req *req)
+{
+	if (!req->enable)
+		return -EINVAL;
+
+	if (ccdc_lsc_validate_config(ccdc, &req->config) < 0) {
+		dev_dbg(to_device(ccdc), "Discard LSC configuration\n");
+		return -EINVAL;
+	}
+
+	if (ccdc_lsc_busy(ccdc))
+		return -EBUSY;
+
+	ccdc_lsc_setup_regs(ccdc, &req->config);
+	ccdc_lsc_program_table(ccdc, req->table);
+	return 0;
+}
+
+/*
+ * ccdc_lsc_error_handler - Handle LSC prefetch error scenario.
+ * @ccdc: Pointer to ISP CCDC device.
+ *
+ * Disables LSC, and defers enablement to shadow registers update time.
+ */
+static void ccdc_lsc_error_handler(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	/*
+	 * From OMAP3 TRM: When this event is pending, the module
+	 * goes into transparent mode (output =input). Normal
+	 * operation can be resumed at the start of the next frame
+	 * after:
+	 *  1) Clearing this event
+	 *  2) Disabling the LSC module
+	 *  3) Enabling it
+	 */
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG,
+		    ISPCCDC_LSC_ENABLE);
+	ccdc->lsc.state = LSC_STATE_STOPPED;
+}
+
+static void ccdc_lsc_free_request(struct isp_ccdc_device *ccdc,
+				  struct ispccdc_lsc_config_req *req)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	if (req == NULL)
+		return;
+
+	if (req->iovm)
+		dma_unmap_sg(isp->dev, req->iovm->sgt->sgl,
+			     req->iovm->sgt->nents, DMA_TO_DEVICE);
+	if (req->table)
+		iommu_vfree(isp->iommu, req->table);
+	kfree(req);
+}
+
+static void ccdc_lsc_free_queue(struct isp_ccdc_device *ccdc,
+				struct list_head *queue)
+{
+	struct ispccdc_lsc_config_req *req, *n;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+	list_for_each_entry_safe(req, n, queue, list) {
+		list_del(&req->list);
+		spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+		ccdc_lsc_free_request(ccdc, req);
+		spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+	}
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+}
+
+static void ccdc_lsc_free_table_work(struct work_struct *work)
+{
+	struct isp_ccdc_device *ccdc;
+	struct ispccdc_lsc *lsc;
+
+	lsc = container_of(work, struct ispccdc_lsc, table_work);
+	ccdc = container_of(lsc, struct isp_ccdc_device, lsc);
+
+	ccdc_lsc_free_queue(ccdc, &lsc->free_queue);
+}
+
+/*
+ * ccdc_lsc_config - Configure the LSC module from a userspace request
+ *
+ * Store the request LSC configuration in the LSC engine request pointer. The
+ * configuration will be applied to the hardware when the CCDC will be enabled,
+ * or at the next LSC interrupt if the CCDC is already running.
+ */
+static int ccdc_lsc_config(struct isp_ccdc_device *ccdc,
+			   struct omap3isp_ccdc_update_config *config)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	struct ispccdc_lsc_config_req *req;
+	unsigned long flags;
+	void *table;
+	u16 update;
+	int ret;
+
+	update = config->update &
+		 (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC);
+	if (!update)
+		return 0;
+
+	if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) {
+		dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table "
+			"need to be supplied\n", __func__);
+		return -EINVAL;
+	}
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (req == NULL)
+		return -ENOMEM;
+
+	if (config->flag & OMAP3ISP_CCDC_CONFIG_LSC) {
+		if (copy_from_user(&req->config, config->lsc_cfg,
+				   sizeof(req->config))) {
+			ret = -EFAULT;
+			goto done;
+		}
+
+		req->enable = 1;
+
+		req->table = iommu_vmalloc(isp->iommu, 0, req->config.size,
+					   IOMMU_FLAG);
+		if (IS_ERR_VALUE(req->table)) {
+			req->table = 0;
+			ret = -ENOMEM;
+			goto done;
+		}
+
+		req->iovm = find_iovm_area(isp->iommu, req->table);
+		if (req->iovm == NULL) {
+			ret = -ENOMEM;
+			goto done;
+		}
+
+		if (!dma_map_sg(isp->dev, req->iovm->sgt->sgl,
+				req->iovm->sgt->nents, DMA_TO_DEVICE)) {
+			ret = -ENOMEM;
+			req->iovm = NULL;
+			goto done;
+		}
+
+		dma_sync_sg_for_cpu(isp->dev, req->iovm->sgt->sgl,
+				    req->iovm->sgt->nents, DMA_TO_DEVICE);
+
+		table = da_to_va(isp->iommu, req->table);
+		if (copy_from_user(table, config->lsc, req->config.size)) {
+			ret = -EFAULT;
+			goto done;
+		}
+
+		dma_sync_sg_for_device(isp->dev, req->iovm->sgt->sgl,
+				       req->iovm->sgt->nents, DMA_TO_DEVICE);
+	}
+
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+	if (ccdc->lsc.request) {
+		list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue);
+		schedule_work(&ccdc->lsc.table_work);
+	}
+	ccdc->lsc.request = req;
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+
+	ret = 0;
+
+done:
+	if (ret < 0)
+		ccdc_lsc_free_request(ccdc, req);
+
+	return ret;
+}
+
+static inline int ccdc_lsc_is_configured(struct isp_ccdc_device *ccdc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+	if (ccdc->lsc.active) {
+		spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+		return 1;
+	}
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+	return 0;
+}
+
+static int ccdc_lsc_enable(struct isp_ccdc_device *ccdc)
+{
+	struct ispccdc_lsc *lsc = &ccdc->lsc;
+
+	if (lsc->state != LSC_STATE_STOPPED)
+		return -EINVAL;
+
+	if (lsc->active) {
+		list_add_tail(&lsc->active->list, &lsc->free_queue);
+		lsc->active = NULL;
+	}
+
+	if (__ccdc_lsc_configure(ccdc, lsc->request) < 0) {
+		omap3isp_sbl_disable(to_isp_device(ccdc),
+				OMAP3_ISP_SBL_CCDC_LSC_READ);
+		list_add_tail(&lsc->request->list, &lsc->free_queue);
+		lsc->request = NULL;
+		goto done;
+	}
+
+	lsc->active = lsc->request;
+	lsc->request = NULL;
+	__ccdc_lsc_enable(ccdc, 1);
+
+done:
+	if (!list_empty(&lsc->free_queue))
+		schedule_work(&lsc->table_work);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Parameters configuration
+ */
+
+/*
+ * ccdc_configure_clamp - Configure optical-black or digital clamping
+ * @ccdc: Pointer to ISP CCDC device.
+ *
+ * The CCDC performs either optical-black or digital clamp. Configure and enable
+ * the selected clamp method.
+ */
+static void ccdc_configure_clamp(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	u32 clamp;
+
+	if (ccdc->obclamp) {
+		clamp  = ccdc->clamp.obgain << ISPCCDC_CLAMP_OBGAIN_SHIFT;
+		clamp |= ccdc->clamp.oblen << ISPCCDC_CLAMP_OBSLEN_SHIFT;
+		clamp |= ccdc->clamp.oblines << ISPCCDC_CLAMP_OBSLN_SHIFT;
+		clamp |= ccdc->clamp.obstpixel << ISPCCDC_CLAMP_OBST_SHIFT;
+		isp_reg_writel(isp, clamp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP);
+	} else {
+		isp_reg_writel(isp, ccdc->clamp.dcsubval,
+			       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_DCSUB);
+	}
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP,
+			ISPCCDC_CLAMP_CLAMPEN,
+			ccdc->obclamp ? ISPCCDC_CLAMP_CLAMPEN : 0);
+}
+
+/*
+ * ccdc_configure_fpc - Configure Faulty Pixel Correction
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_configure_fpc(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC, ISPCCDC_FPC_FPCEN);
+
+	if (!ccdc->fpc_en)
+		return;
+
+	isp_reg_writel(isp, ccdc->fpc.fpcaddr, OMAP3_ISP_IOMEM_CCDC,
+		       ISPCCDC_FPC_ADDR);
+	/* The FPNUM field must be set before enabling FPC. */
+	isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC);
+	isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT) |
+		       ISPCCDC_FPC_FPCEN, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC);
+}
+
+/*
+ * ccdc_configure_black_comp - Configure Black Level Compensation.
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_configure_black_comp(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	u32 blcomp;
+
+	blcomp  = ccdc->blcomp.b_mg << ISPCCDC_BLKCMP_B_MG_SHIFT;
+	blcomp |= ccdc->blcomp.gb_g << ISPCCDC_BLKCMP_GB_G_SHIFT;
+	blcomp |= ccdc->blcomp.gr_cy << ISPCCDC_BLKCMP_GR_CY_SHIFT;
+	blcomp |= ccdc->blcomp.r_ye << ISPCCDC_BLKCMP_R_YE_SHIFT;
+
+	isp_reg_writel(isp, blcomp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_BLKCMP);
+}
+
+/*
+ * ccdc_configure_lpf - Configure Low-Pass Filter (LPF).
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_configure_lpf(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE,
+			ISPCCDC_SYN_MODE_LPF,
+			ccdc->lpf ? ISPCCDC_SYN_MODE_LPF : 0);
+}
+
+/*
+ * ccdc_configure_alaw - Configure A-law compression.
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_configure_alaw(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	u32 alaw = 0;
+
+	switch (ccdc->syncif.datsz) {
+	case 8:
+		return;
+
+	case 10:
+		alaw = ISPCCDC_ALAW_GWDI_9_0;
+		break;
+	case 11:
+		alaw = ISPCCDC_ALAW_GWDI_10_1;
+		break;
+	case 12:
+		alaw = ISPCCDC_ALAW_GWDI_11_2;
+		break;
+	case 13:
+		alaw = ISPCCDC_ALAW_GWDI_12_3;
+		break;
+	}
+
+	if (ccdc->alaw)
+		alaw |= ISPCCDC_ALAW_CCDTBL;
+
+	isp_reg_writel(isp, alaw, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW);
+}
+
+/*
+ * ccdc_config_imgattr - Configure sensor image specific attributes.
+ * @ccdc: Pointer to ISP CCDC device.
+ * @colptn: Color pattern of the sensor.
+ */
+static void ccdc_config_imgattr(struct isp_ccdc_device *ccdc, u32 colptn)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_writel(isp, colptn, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN);
+}
+
+/*
+ * ccdc_config - Set CCDC configuration from userspace
+ * @ccdc: Pointer to ISP CCDC device.
+ * @userspace_add: Structure containing CCDC configuration sent from userspace.
+ *
+ * Returns 0 if successful, -EINVAL if the pointer to the configuration
+ * structure is null, or the copy_from_user function fails to copy user space
+ * memory to kernel space memory.
+ */
+static int ccdc_config(struct isp_ccdc_device *ccdc,
+		       struct omap3isp_ccdc_update_config *ccdc_struct)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccdc->lock, flags);
+	ccdc->shadow_update = 1;
+	spin_unlock_irqrestore(&ccdc->lock, flags);
+
+	if (OMAP3ISP_CCDC_ALAW & ccdc_struct->update) {
+		ccdc->alaw = !!(OMAP3ISP_CCDC_ALAW & ccdc_struct->flag);
+		ccdc->update |= OMAP3ISP_CCDC_ALAW;
+	}
+
+	if (OMAP3ISP_CCDC_LPF & ccdc_struct->update) {
+		ccdc->lpf = !!(OMAP3ISP_CCDC_LPF & ccdc_struct->flag);
+		ccdc->update |= OMAP3ISP_CCDC_LPF;
+	}
+
+	if (OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->update) {
+		if (copy_from_user(&ccdc->clamp, ccdc_struct->bclamp,
+				   sizeof(ccdc->clamp))) {
+			ccdc->shadow_update = 0;
+			return -EFAULT;
+		}
+
+		ccdc->obclamp = !!(OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->flag);
+		ccdc->update |= OMAP3ISP_CCDC_BLCLAMP;
+	}
+
+	if (OMAP3ISP_CCDC_BCOMP & ccdc_struct->update) {
+		if (copy_from_user(&ccdc->blcomp, ccdc_struct->blcomp,
+				   sizeof(ccdc->blcomp))) {
+			ccdc->shadow_update = 0;
+			return -EFAULT;
+		}
+
+		ccdc->update |= OMAP3ISP_CCDC_BCOMP;
+	}
+
+	ccdc->shadow_update = 0;
+
+	if (OMAP3ISP_CCDC_FPC & ccdc_struct->update) {
+		u32 table_old = 0;
+		u32 table_new;
+		u32 size;
+
+		if (ccdc->state != ISP_PIPELINE_STREAM_STOPPED)
+			return -EBUSY;
+
+		ccdc->fpc_en = !!(OMAP3ISP_CCDC_FPC & ccdc_struct->flag);
+
+		if (ccdc->fpc_en) {
+			if (copy_from_user(&ccdc->fpc, ccdc_struct->fpc,
+					   sizeof(ccdc->fpc)))
+				return -EFAULT;
+
+			/*
+			 * table_new must be 64-bytes aligned, but it's
+			 * already done by iommu_vmalloc().
+			 */
+			size = ccdc->fpc.fpnum * 4;
+			table_new = iommu_vmalloc(isp->iommu, 0, size,
+						  IOMMU_FLAG);
+			if (IS_ERR_VALUE(table_new))
+				return -ENOMEM;
+
+			if (copy_from_user(da_to_va(isp->iommu, table_new),
+					   (__force void __user *)
+					   ccdc->fpc.fpcaddr, size)) {
+				iommu_vfree(isp->iommu, table_new);
+				return -EFAULT;
+			}
+
+			table_old = ccdc->fpc.fpcaddr;
+			ccdc->fpc.fpcaddr = table_new;
+		}
+
+		ccdc_configure_fpc(ccdc);
+		if (table_old != 0)
+			iommu_vfree(isp->iommu, table_old);
+	}
+
+	return ccdc_lsc_config(ccdc, ccdc_struct);
+}
+
+static void ccdc_apply_controls(struct isp_ccdc_device *ccdc)
+{
+	if (ccdc->update & OMAP3ISP_CCDC_ALAW) {
+		ccdc_configure_alaw(ccdc);
+		ccdc->update &= ~OMAP3ISP_CCDC_ALAW;
+	}
+
+	if (ccdc->update & OMAP3ISP_CCDC_LPF) {
+		ccdc_configure_lpf(ccdc);
+		ccdc->update &= ~OMAP3ISP_CCDC_LPF;
+	}
+
+	if (ccdc->update & OMAP3ISP_CCDC_BLCLAMP) {
+		ccdc_configure_clamp(ccdc);
+		ccdc->update &= ~OMAP3ISP_CCDC_BLCLAMP;
+	}
+
+	if (ccdc->update & OMAP3ISP_CCDC_BCOMP) {
+		ccdc_configure_black_comp(ccdc);
+		ccdc->update &= ~OMAP3ISP_CCDC_BCOMP;
+	}
+}
+
+/*
+ * omap3isp_ccdc_restore_context - Restore values of the CCDC module registers
+ * @dev: Pointer to ISP device
+ */
+void omap3isp_ccdc_restore_context(struct isp_device *isp)
+{
+	struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ISPCCDC_CFG_VDLC);
+
+	ccdc->update = OMAP3ISP_CCDC_ALAW | OMAP3ISP_CCDC_LPF
+		     | OMAP3ISP_CCDC_BLCLAMP | OMAP3ISP_CCDC_BCOMP;
+	ccdc_apply_controls(ccdc);
+	ccdc_configure_fpc(ccdc);
+}
+
+/* -----------------------------------------------------------------------------
+ * Format- and pipeline-related configuration helpers
+ */
+
+/*
+ * ccdc_config_vp - Configure the Video Port.
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_config_vp(struct isp_ccdc_device *ccdc)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
+	struct isp_device *isp = to_isp_device(ccdc);
+	unsigned long l3_ick = pipe->l3_ick;
+	unsigned int max_div = isp->revision == ISP_REVISION_15_0 ? 64 : 8;
+	unsigned int div = 0;
+	u32 fmtcfg_vp;
+
+	fmtcfg_vp = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG)
+		  & ~(ISPCCDC_FMTCFG_VPIN_MASK | ISPCCDC_FMTCFG_VPIF_FRQ_MASK);
+
+	switch (ccdc->syncif.datsz) {
+	case 8:
+	case 10:
+		fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_9_0;
+		break;
+	case 11:
+		fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_10_1;
+		break;
+	case 12:
+		fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_11_2;
+		break;
+	case 13:
+		fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_12_3;
+		break;
+	};
+
+	if (pipe->input)
+		div = DIV_ROUND_UP(l3_ick, pipe->max_rate);
+	else if (ccdc->vpcfg.pixelclk)
+		div = l3_ick / ccdc->vpcfg.pixelclk;
+
+	div = clamp(div, 2U, max_div);
+	fmtcfg_vp |= (div - 2) << ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT;
+
+	isp_reg_writel(isp, fmtcfg_vp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG);
+}
+
+/*
+ * ccdc_enable_vp - Enable Video Port.
+ * @ccdc: Pointer to ISP CCDC device.
+ * @enable: 0 Disables VP, 1 Enables VP
+ *
+ * This is needed for outputting image to Preview, H3A and HIST ISP submodules.
+ */
+static void ccdc_enable_vp(struct isp_ccdc_device *ccdc, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG,
+			ISPCCDC_FMTCFG_VPEN, enable ? ISPCCDC_FMTCFG_VPEN : 0);
+}
+
+/*
+ * ccdc_config_outlineoffset - Configure memory saving output line offset
+ * @ccdc: Pointer to ISP CCDC device.
+ * @offset: Address offset to start a new line. Must be twice the
+ *          Output width and aligned on 32 byte boundary
+ * @oddeven: Specifies the odd/even line pattern to be chosen to store the
+ *           output.
+ * @numlines: Set the value 0-3 for +1-4lines, 4-7 for -1-4lines.
+ *
+ * - Configures the output line offset when stored in memory
+ * - Sets the odd/even line pattern to store the output
+ *    (EVENEVEN (1), ODDEVEN (2), EVENODD (3), ODDODD (4))
+ * - Configures the number of even and odd line fields in case of rearranging
+ * the lines.
+ */
+static void ccdc_config_outlineoffset(struct isp_ccdc_device *ccdc,
+					u32 offset, u8 oddeven, u8 numlines)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_writel(isp, offset & 0xffff,
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF);
+
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+		    ISPCCDC_SDOFST_FINV);
+
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+		    ISPCCDC_SDOFST_FOFST_4L);
+
+	switch (oddeven) {
+	case EVENEVEN:
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+			    (numlines & 0x7) << ISPCCDC_SDOFST_LOFST0_SHIFT);
+		break;
+	case ODDEVEN:
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+			    (numlines & 0x7) << ISPCCDC_SDOFST_LOFST1_SHIFT);
+		break;
+	case EVENODD:
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+			    (numlines & 0x7) << ISPCCDC_SDOFST_LOFST2_SHIFT);
+		break;
+	case ODDODD:
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST,
+			    (numlines & 0x7) << ISPCCDC_SDOFST_LOFST3_SHIFT);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * ccdc_set_outaddr - Set memory address to save output image
+ * @ccdc: Pointer to ISP CCDC device.
+ * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary.
+ *
+ * Sets the memory address where the output will be saved.
+ */
+static void ccdc_set_outaddr(struct isp_ccdc_device *ccdc, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR);
+}
+
+/*
+ * omap3isp_ccdc_max_rate - Calculate maximum input data rate based on the input
+ * @ccdc: Pointer to ISP CCDC device.
+ * @max_rate: Maximum calculated data rate.
+ *
+ * Returns in *max_rate less value between calculated and passed
+ */
+void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc,
+			    unsigned int *max_rate)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
+	unsigned int rate;
+
+	if (pipe == NULL)
+		return;
+
+	/*
+	 * TRM says that for parallel sensors the maximum data rate
+	 * should be 90% form L3/2 clock, otherwise just L3/2.
+	 */
+	if (ccdc->input == CCDC_INPUT_PARALLEL)
+		rate = pipe->l3_ick / 2 * 9 / 10;
+	else
+		rate = pipe->l3_ick / 2;
+
+	*max_rate = min(*max_rate, rate);
+}
+
+/*
+ * ccdc_config_sync_if - Set CCDC sync interface configuration
+ * @ccdc: Pointer to ISP CCDC device.
+ * @syncif: Structure containing the sync parameters like field state, CCDC in
+ *          master/slave mode, raw/yuv data, polarity of data, field, hs, vs
+ *          signals.
+ */
+static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc,
+				struct ispccdc_syncif *syncif)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC,
+				     ISPCCDC_SYN_MODE);
+
+	syn_mode |= ISPCCDC_SYN_MODE_VDHDEN;
+
+	if (syncif->fldstat)
+		syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT;
+
+	syn_mode &= ~ISPCCDC_SYN_MODE_DATSIZ_MASK;
+	switch (syncif->datsz) {
+	case 8:
+		syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_8;
+		break;
+	case 10:
+		syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_10;
+		break;
+	case 11:
+		syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_11;
+		break;
+	case 12:
+		syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_12;
+		break;
+	};
+
+	if (syncif->fldmode)
+		syn_mode |= ISPCCDC_SYN_MODE_FLDMODE;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE;
+
+	if (syncif->datapol)
+		syn_mode |= ISPCCDC_SYN_MODE_DATAPOL;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL;
+
+	if (syncif->fldpol)
+		syn_mode |= ISPCCDC_SYN_MODE_FLDPOL;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL;
+
+	if (syncif->hdpol)
+		syn_mode |= ISPCCDC_SYN_MODE_HDPOL;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_HDPOL;
+
+	if (syncif->vdpol)
+		syn_mode |= ISPCCDC_SYN_MODE_VDPOL;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL;
+
+	if (syncif->ccdc_mastermode) {
+		syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT;
+		isp_reg_writel(isp,
+			       syncif->hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT
+			     | syncif->vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT,
+			       OMAP3_ISP_IOMEM_CCDC,
+			       ISPCCDC_HD_VD_WID);
+
+		isp_reg_writel(isp,
+			       syncif->ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT
+			     | syncif->hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT,
+			       OMAP3_ISP_IOMEM_CCDC,
+			       ISPCCDC_PIX_LINES);
+	} else
+		syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT |
+			      ISPCCDC_SYN_MODE_VDHDOUT);
+
+	isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
+
+	if (!syncif->bt_r656_en)
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF,
+			    ISPCCDC_REC656IF_R656ON);
+}
+
+/* CCDC formats descriptions */
+static const u32 ccdc_sgrbg_pattern =
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
+
+static const u32 ccdc_srggb_pattern =
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
+
+static const u32 ccdc_sbggr_pattern =
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
+
+static const u32 ccdc_sgbrg_pattern =
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
+	ISPCCDC_COLPTN_Gb_G  << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
+	ISPCCDC_COLPTN_B_Mg  << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
+	ISPCCDC_COLPTN_R_Ye  << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
+	ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
+
+static void ccdc_configure(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+	struct isp_parallel_platform_data *pdata = NULL;
+	struct v4l2_subdev *sensor;
+	struct v4l2_mbus_framefmt *format;
+	struct media_pad *pad;
+	unsigned long flags;
+	u32 syn_mode;
+	u32 ccdc_pattern;
+
+	if (ccdc->input == CCDC_INPUT_PARALLEL) {
+		pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]);
+		sensor = media_entity_to_v4l2_subdev(pad->entity);
+		pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv)
+			->bus.parallel;
+	}
+
+	omap3isp_configure_bridge(isp, ccdc->input, pdata);
+
+	ccdc->syncif.datsz = pdata ? pdata->width : 10;
+	ccdc_config_sync_if(ccdc, &ccdc->syncif);
+
+	/* CCDC_PAD_SINK */
+	format = &ccdc->formats[CCDC_PAD_SINK];
+
+	syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
+
+	/* Use the raw, unprocessed data when writing to memory. The H3A and
+	 * histogram modules are still fed with lens shading corrected data.
+	 */
+	syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR;
+
+	if (ccdc->output & CCDC_OUTPUT_MEMORY)
+		syn_mode |= ISPCCDC_SYN_MODE_WEN;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_WEN;
+
+	if (ccdc->output & CCDC_OUTPUT_RESIZER)
+		syn_mode |= ISPCCDC_SYN_MODE_SDR2RSZ;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ;
+
+	/* Use PACK8 mode for 1byte per pixel formats. */
+	if (omap3isp_video_format_info(format->code)->bpp <= 8)
+		syn_mode |= ISPCCDC_SYN_MODE_PACK8;
+	else
+		syn_mode &= ~ISPCCDC_SYN_MODE_PACK8;
+
+	isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
+
+	/* Mosaic filter */
+	switch (format->code) {
+	case V4L2_MBUS_FMT_SRGGB10_1X10:
+	case V4L2_MBUS_FMT_SRGGB12_1X12:
+		ccdc_pattern = ccdc_srggb_pattern;
+		break;
+	case V4L2_MBUS_FMT_SBGGR10_1X10:
+	case V4L2_MBUS_FMT_SBGGR12_1X12:
+		ccdc_pattern = ccdc_sbggr_pattern;
+		break;
+	case V4L2_MBUS_FMT_SGBRG10_1X10:
+	case V4L2_MBUS_FMT_SGBRG12_1X12:
+		ccdc_pattern = ccdc_sgbrg_pattern;
+		break;
+	default:
+		/* Use GRBG */
+		ccdc_pattern = ccdc_sgrbg_pattern;
+		break;
+	}
+	ccdc_config_imgattr(ccdc, ccdc_pattern);
+
+	/* Generate VD0 on the last line of the image and VD1 on the
+	 * 2/3 height line.
+	 */
+	isp_reg_writel(isp, ((format->height - 2) << ISPCCDC_VDINT_0_SHIFT) |
+		       ((format->height * 2 / 3) << ISPCCDC_VDINT_1_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VDINT);
+
+	/* CCDC_PAD_SOURCE_OF */
+	format = &ccdc->formats[CCDC_PAD_SOURCE_OF];
+
+	isp_reg_writel(isp, (0 << ISPCCDC_HORZ_INFO_SPH_SHIFT) |
+		       ((format->width - 1) << ISPCCDC_HORZ_INFO_NPH_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO);
+	isp_reg_writel(isp, 0 << ISPCCDC_VERT_START_SLV0_SHIFT,
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_START);
+	isp_reg_writel(isp, (format->height - 1)
+			<< ISPCCDC_VERT_LINES_NLV_SHIFT,
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_LINES);
+
+	ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value, 0, 0);
+
+	/* CCDC_PAD_SOURCE_VP */
+	format = &ccdc->formats[CCDC_PAD_SOURCE_VP];
+
+	isp_reg_writel(isp, (0 << ISPCCDC_FMT_HORZ_FMTSPH_SHIFT) |
+		       (format->width << ISPCCDC_FMT_HORZ_FMTLNH_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_HORZ);
+	isp_reg_writel(isp, (0 << ISPCCDC_FMT_VERT_FMTSLV_SHIFT) |
+		       ((format->height + 1) << ISPCCDC_FMT_VERT_FMTLNV_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_VERT);
+
+	isp_reg_writel(isp, (format->width << ISPCCDC_VP_OUT_HORZ_NUM_SHIFT) |
+		       (format->height << ISPCCDC_VP_OUT_VERT_NUM_SHIFT),
+		       OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT);
+
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+	if (ccdc->lsc.request == NULL)
+		goto unlock;
+
+	WARN_ON(ccdc->lsc.active);
+
+	/* Get last good LSC configuration. If it is not supported for
+	 * the current active resolution discard it.
+	 */
+	if (ccdc->lsc.active == NULL &&
+	    __ccdc_lsc_configure(ccdc, ccdc->lsc.request) == 0) {
+		ccdc->lsc.active = ccdc->lsc.request;
+	} else {
+		list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue);
+		schedule_work(&ccdc->lsc.table_work);
+	}
+
+	ccdc->lsc.request = NULL;
+
+unlock:
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+
+	ccdc_apply_controls(ccdc);
+}
+
+static void __ccdc_enable(struct isp_ccdc_device *ccdc, int enable)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR,
+			ISPCCDC_PCR_EN, enable ? ISPCCDC_PCR_EN : 0);
+}
+
+static int ccdc_disable(struct isp_ccdc_device *ccdc)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&ccdc->lock, flags);
+	if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS)
+		ccdc->stopping = CCDC_STOP_REQUEST;
+	spin_unlock_irqrestore(&ccdc->lock, flags);
+
+	ret = wait_event_timeout(ccdc->wait,
+				 ccdc->stopping == CCDC_STOP_FINISHED,
+				 msecs_to_jiffies(2000));
+	if (ret == 0) {
+		ret = -ETIMEDOUT;
+		dev_warn(to_device(ccdc), "CCDC stop timeout!\n");
+	}
+
+	omap3isp_sbl_disable(to_isp_device(ccdc), OMAP3_ISP_SBL_CCDC_LSC_READ);
+
+	mutex_lock(&ccdc->ioctl_lock);
+	ccdc_lsc_free_request(ccdc, ccdc->lsc.request);
+	ccdc->lsc.request = ccdc->lsc.active;
+	ccdc->lsc.active = NULL;
+	cancel_work_sync(&ccdc->lsc.table_work);
+	ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue);
+	mutex_unlock(&ccdc->ioctl_lock);
+
+	ccdc->stopping = CCDC_STOP_NOT_REQUESTED;
+
+	return ret > 0 ? 0 : ret;
+}
+
+static void ccdc_enable(struct isp_ccdc_device *ccdc)
+{
+	if (ccdc_lsc_is_configured(ccdc))
+		__ccdc_lsc_enable(ccdc, 1);
+	__ccdc_enable(ccdc, 1);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+/*
+ * ccdc_sbl_busy - Poll idle state of CCDC and related SBL memory write bits
+ * @ccdc: Pointer to ISP CCDC device.
+ *
+ * Returns zero if the CCDC is idle and the image has been written to
+ * memory, too.
+ */
+static int ccdc_sbl_busy(struct isp_ccdc_device *ccdc)
+{
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	return omap3isp_ccdc_busy(ccdc)
+		| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_0) &
+		   ISPSBL_CCDC_WR_0_DATA_READY)
+		| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_1) &
+		   ISPSBL_CCDC_WR_0_DATA_READY)
+		| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_2) &
+		   ISPSBL_CCDC_WR_0_DATA_READY)
+		| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_3) &
+		   ISPSBL_CCDC_WR_0_DATA_READY);
+}
+
+/*
+ * ccdc_sbl_wait_idle - Wait until the CCDC and related SBL are idle
+ * @ccdc: Pointer to ISP CCDC device.
+ * @max_wait: Max retry count in us for wait for idle/busy transition.
+ */
+static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc,
+			      unsigned int max_wait)
+{
+	unsigned int wait = 0;
+
+	if (max_wait == 0)
+		max_wait = 10000; /* 10 ms */
+
+	for (wait = 0; wait <= max_wait; wait++) {
+		if (!ccdc_sbl_busy(ccdc))
+			return 0;
+
+		rmb();
+		udelay(1);
+	}
+
+	return -EBUSY;
+}
+
+/* __ccdc_handle_stopping - Handle CCDC and/or LSC stopping sequence
+ * @ccdc: Pointer to ISP CCDC device.
+ * @event: Pointing which event trigger handler
+ *
+ * Return 1 when the event and stopping request combination is satisfyied,
+ * zero otherwise.
+ */
+static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event)
+{
+	int rval = 0;
+
+	switch ((ccdc->stopping & 3) | event) {
+	case CCDC_STOP_REQUEST | CCDC_EVENT_VD1:
+		if (ccdc->lsc.state != LSC_STATE_STOPPED)
+			__ccdc_lsc_enable(ccdc, 0);
+		__ccdc_enable(ccdc, 0);
+		ccdc->stopping = CCDC_STOP_EXECUTED;
+		return 1;
+
+	case CCDC_STOP_EXECUTED | CCDC_EVENT_VD0:
+		ccdc->stopping |= CCDC_STOP_CCDC_FINISHED;
+		if (ccdc->lsc.state == LSC_STATE_STOPPED)
+			ccdc->stopping |= CCDC_STOP_LSC_FINISHED;
+		rval = 1;
+		break;
+
+	case CCDC_STOP_EXECUTED | CCDC_EVENT_LSC_DONE:
+		ccdc->stopping |= CCDC_STOP_LSC_FINISHED;
+		rval = 1;
+		break;
+
+	case CCDC_STOP_EXECUTED | CCDC_EVENT_VD1:
+		return 1;
+	}
+
+	if (ccdc->stopping == CCDC_STOP_FINISHED) {
+		wake_up(&ccdc->wait);
+		rval = 1;
+	}
+
+	return rval;
+}
+
+static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
+{
+	struct video_device *vdev = &ccdc->subdev.devnode;
+	struct v4l2_event event;
+
+	memset(&event, 0, sizeof(event));
+	event.type = V4L2_EVENT_OMAP3ISP_HS_VS;
+
+	v4l2_event_queue(vdev, &event);
+}
+
+/*
+ * ccdc_lsc_isr - Handle LSC events
+ * @ccdc: Pointer to ISP CCDC device.
+ * @events: LSC events
+ */
+static void ccdc_lsc_isr(struct isp_ccdc_device *ccdc, u32 events)
+{
+	unsigned long flags;
+
+	if (events & IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ) {
+		ccdc_lsc_error_handler(ccdc);
+		ccdc->error = 1;
+		dev_dbg(to_device(ccdc), "lsc prefetch error\n");
+	}
+
+	if (!(events & IRQ0STATUS_CCDC_LSC_DONE_IRQ))
+		return;
+
+	/* LSC_DONE interrupt occur, there are two cases
+	 * 1. stopping for reconfiguration
+	 * 2. stopping because of STREAM OFF command
+	 */
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+
+	if (ccdc->lsc.state == LSC_STATE_STOPPING)
+		ccdc->lsc.state = LSC_STATE_STOPPED;
+
+	if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_LSC_DONE))
+		goto done;
+
+	if (ccdc->lsc.state != LSC_STATE_RECONFIG)
+		goto done;
+
+	/* LSC is in STOPPING state, change to the new state */
+	ccdc->lsc.state = LSC_STATE_STOPPED;
+
+	/* This is an exception. Start of frame and LSC_DONE interrupt
+	 * have been received on the same time. Skip this event and wait
+	 * for better times.
+	 */
+	if (events & IRQ0STATUS_HS_VS_IRQ)
+		goto done;
+
+	/* The LSC engine is stopped at this point. Enable it if there's a
+	 * pending request.
+	 */
+	if (ccdc->lsc.request == NULL)
+		goto done;
+
+	ccdc_lsc_enable(ccdc);
+
+done:
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+}
+
+static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
+	struct isp_device *isp = to_isp_device(ccdc);
+	struct isp_buffer *buffer;
+	int restart = 0;
+
+	/* The CCDC generates VD0 interrupts even when disabled (the datasheet
+	 * doesn't explicitly state if that's supposed to happen or not, so it
+	 * can be considered as a hardware bug or as a feature, but we have to
+	 * deal with it anyway). Disabling the CCDC when no buffer is available
+	 * would thus not be enough, we need to handle the situation explicitly.
+	 */
+	if (list_empty(&ccdc->video_out.dmaqueue))
+		goto done;
+
+	/* We're in continuous mode, and memory writes were disabled due to a
+	 * buffer underrun. Reenable them now that we have a buffer. The buffer
+	 * address has been set in ccdc_video_queue.
+	 */
+	if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) {
+		restart = 1;
+		ccdc->underrun = 0;
+		goto done;
+	}
+
+	if (ccdc_sbl_wait_idle(ccdc, 1000)) {
+		dev_info(isp->dev, "CCDC won't become idle!\n");
+		goto done;
+	}
+
+	buffer = omap3isp_video_buffer_next(&ccdc->video_out, ccdc->error);
+	if (buffer != NULL) {
+		ccdc_set_outaddr(ccdc, buffer->isp_addr);
+		restart = 1;
+	}
+
+	pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
+
+	if (ccdc->state == ISP_PIPELINE_STREAM_SINGLESHOT &&
+	    isp_pipeline_ready(pipe))
+		omap3isp_pipeline_set_stream(pipe,
+					ISP_PIPELINE_STREAM_SINGLESHOT);
+
+done:
+	ccdc->error = 0;
+	return restart;
+}
+
+/*
+ * ccdc_vd0_isr - Handle VD0 event
+ * @ccdc: Pointer to ISP CCDC device.
+ *
+ * Executes LSC deferred enablement before next frame starts.
+ */
+static void ccdc_vd0_isr(struct isp_ccdc_device *ccdc)
+{
+	unsigned long flags;
+	int restart = 0;
+
+	if (ccdc->output & CCDC_OUTPUT_MEMORY)
+		restart = ccdc_isr_buffer(ccdc);
+
+	spin_lock_irqsave(&ccdc->lock, flags);
+	if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_VD0)) {
+		spin_unlock_irqrestore(&ccdc->lock, flags);
+		return;
+	}
+
+	if (!ccdc->shadow_update)
+		ccdc_apply_controls(ccdc);
+	spin_unlock_irqrestore(&ccdc->lock, flags);
+
+	if (restart)
+		ccdc_enable(ccdc);
+}
+
+/*
+ * ccdc_vd1_isr - Handle VD1 event
+ * @ccdc: Pointer to ISP CCDC device.
+ */
+static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
+
+	/*
+	 * Depending on the CCDC pipeline state, CCDC stopping should be
+	 * handled differently. In SINGLESHOT we emulate an internal CCDC
+	 * stopping because the CCDC hw works only in continuous mode.
+	 * When CONTINUOUS pipeline state is used and the CCDC writes it's
+	 * data to memory the CCDC and LSC are stopped immediately but
+	 * without change the CCDC stopping state machine. The CCDC
+	 * stopping state machine should be used only when user request
+	 * for stopping is received (SINGLESHOT is an exeption).
+	 */
+	switch (ccdc->state) {
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		ccdc->stopping = CCDC_STOP_REQUEST;
+		break;
+
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (ccdc->output & CCDC_OUTPUT_MEMORY) {
+			if (ccdc->lsc.state != LSC_STATE_STOPPED)
+				__ccdc_lsc_enable(ccdc, 0);
+			__ccdc_enable(ccdc, 0);
+		}
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		break;
+	}
+
+	if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_VD1))
+		goto done;
+
+	if (ccdc->lsc.request == NULL)
+		goto done;
+
+	/*
+	 * LSC need to be reconfigured. Stop it here and on next LSC_DONE IRQ
+	 * do the appropriate changes in registers
+	 */
+	if (ccdc->lsc.state == LSC_STATE_RUNNING) {
+		__ccdc_lsc_enable(ccdc, 0);
+		ccdc->lsc.state = LSC_STATE_RECONFIG;
+		goto done;
+	}
+
+	/* LSC has been in STOPPED state, enable it */
+	if (ccdc->lsc.state == LSC_STATE_STOPPED)
+		ccdc_lsc_enable(ccdc);
+
+done:
+	spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
+}
+
+/*
+ * omap3isp_ccdc_isr - Configure CCDC during interframe time.
+ * @ccdc: Pointer to ISP CCDC device.
+ * @events: CCDC events
+ */
+int omap3isp_ccdc_isr(struct isp_ccdc_device *ccdc, u32 events)
+{
+	if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED)
+		return 0;
+
+	if (events & IRQ0STATUS_CCDC_VD1_IRQ)
+		ccdc_vd1_isr(ccdc);
+
+	ccdc_lsc_isr(ccdc, events);
+
+	if (events & IRQ0STATUS_CCDC_VD0_IRQ)
+		ccdc_vd0_isr(ccdc);
+
+	if (events & IRQ0STATUS_HS_VS_IRQ)
+		ccdc_hs_vs_isr(ccdc);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer)
+{
+	struct isp_ccdc_device *ccdc = &video->isp->isp_ccdc;
+
+	if (!(ccdc->output & CCDC_OUTPUT_MEMORY))
+		return -ENODEV;
+
+	ccdc_set_outaddr(ccdc, buffer->isp_addr);
+
+	/* We now have a buffer queued on the output, restart the pipeline in
+	 * on the next CCDC interrupt if running in continuous mode (or when
+	 * starting the stream).
+	 */
+	ccdc->underrun = 1;
+
+	return 0;
+}
+
+static const struct isp_video_operations ccdc_video_ops = {
+	.queue = ccdc_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+/*
+ * ccdc_ioctl - CCDC module private ioctl's
+ * @sd: ISP CCDC V4L2 subdevice
+ * @cmd: ioctl command
+ * @arg: ioctl argument
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	int ret;
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_CCDC_CFG:
+		mutex_lock(&ccdc->ioctl_lock);
+		ret = ccdc_config(ccdc, arg);
+		mutex_unlock(&ccdc->ioctl_lock);
+		break;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return ret;
+}
+
+static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				struct v4l2_event_subscription *sub)
+{
+	if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS)
+		return -EINVAL;
+
+	return v4l2_event_subscribe(fh, sub);
+}
+
+static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				  struct v4l2_event_subscription *sub)
+{
+	return v4l2_event_unsubscribe(fh, sub);
+}
+
+/*
+ * ccdc_set_stream - Enable/Disable streaming on the CCDC module
+ * @sd: ISP CCDC V4L2 subdevice
+ * @enable: Enable/disable stream
+ *
+ * When writing to memory, the CCDC hardware can't be enabled without a memory
+ * buffer to write to. As the s_stream operation is called in response to a
+ * STREAMON call without any buffer queued yet, just update the enabled field
+ * and return immediately. The CCDC will be enabled in ccdc_isr_buffer().
+ *
+ * When not writing to memory enable the CCDC immediately.
+ */
+static int ccdc_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = to_isp_device(ccdc);
+	int ret = 0;
+
+	if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+
+		omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_CCDC);
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
+			    ISPCCDC_CFG_VDLC);
+
+		ccdc_configure(ccdc);
+
+		/* TODO: Don't configure the video port if all of its output
+		 * links are inactive.
+		 */
+		ccdc_config_vp(ccdc);
+		ccdc_enable_vp(ccdc, 1);
+		ccdc->error = 0;
+		ccdc_print_status(ccdc);
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (ccdc->output & CCDC_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
+
+		if (ccdc->underrun || !(ccdc->output & CCDC_OUTPUT_MEMORY))
+			ccdc_enable(ccdc);
+
+		ccdc->underrun = 0;
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (ccdc->output & CCDC_OUTPUT_MEMORY &&
+		    ccdc->state != ISP_PIPELINE_STREAM_SINGLESHOT)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
+
+		ccdc_enable(ccdc);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		ret = ccdc_disable(ccdc);
+		if (ccdc->output & CCDC_OUTPUT_MEMORY)
+			omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
+		omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_CCDC);
+		ccdc->underrun = 0;
+		break;
+	}
+
+	ccdc->state = enable;
+	return ret;
+}
+
+static struct v4l2_mbus_framefmt *
+__ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh,
+		  unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &ccdc->formats[pad];
+}
+
+/*
+ * ccdc_try_format - Try video format on a pad
+ * @ccdc: ISP CCDC device
+ * @fh : V4L2 subdev file handle
+ * @pad: Pad number
+ * @fmt: Format
+ */
+static void
+ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh,
+		unsigned int pad, struct v4l2_mbus_framefmt *fmt,
+		enum v4l2_subdev_format_whence which)
+{
+	struct v4l2_mbus_framefmt *format;
+	const struct isp_format_info *info;
+	unsigned int width = fmt->width;
+	unsigned int height = fmt->height;
+	unsigned int i;
+
+	switch (pad) {
+	case CCDC_PAD_SINK:
+		/* TODO: If the CCDC output formatter pad is connected directly
+		 * to the resizer, only YUV formats can be used.
+		 */
+		for (i = 0; i < ARRAY_SIZE(ccdc_fmts); i++) {
+			if (fmt->code == ccdc_fmts[i])
+				break;
+		}
+
+		/* If not found, use SGRBG10 as default */
+		if (i >= ARRAY_SIZE(ccdc_fmts))
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+
+		/* Clamp the input size. */
+		fmt->width = clamp_t(u32, width, 32, 4096);
+		fmt->height = clamp_t(u32, height, 32, 4096);
+		break;
+
+	case CCDC_PAD_SOURCE_OF:
+		format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+
+		/* The data formatter truncates the number of horizontal output
+		 * pixels to a multiple of 16. To avoid clipping data, allow
+		 * callers to request an output size bigger than the input size
+		 * up to the nearest multiple of 16.
+		 */
+		fmt->width = clamp_t(u32, width, 32, (fmt->width + 15) & ~15);
+		fmt->width &= ~15;
+		fmt->height = clamp_t(u32, height, 32, fmt->height);
+		break;
+
+	case CCDC_PAD_SOURCE_VP:
+		format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+
+		/* The video port interface truncates the data to 10 bits. */
+		info = omap3isp_video_format_info(fmt->code);
+		fmt->code = info->truncated;
+
+		/* The number of lines that can be clocked out from the video
+		 * port output must be at least one line less than the number
+		 * of input lines.
+		 */
+		fmt->width = clamp_t(u32, width, 32, fmt->width);
+		fmt->height = clamp_t(u32, height, 32, fmt->height - 1);
+		break;
+	}
+
+	/* Data is written to memory unpacked, each 10-bit or 12-bit pixel is
+	 * stored on 2 bytes.
+	 */
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * ccdc_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int ccdc_enum_mbus_code(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	switch (code->pad) {
+	case CCDC_PAD_SINK:
+		if (code->index >= ARRAY_SIZE(ccdc_fmts))
+			return -EINVAL;
+
+		code->code = ccdc_fmts[code->index];
+		break;
+
+	case CCDC_PAD_SOURCE_OF:
+	case CCDC_PAD_SOURCE_VP:
+		/* No format conversion inside CCDC */
+		if (code->index != 0)
+			return -EINVAL;
+
+		format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK,
+					   V4L2_SUBDEV_FORMAT_TRY);
+
+		code->code = format->code;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ccdc_enum_frame_size(struct v4l2_subdev *sd,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	ccdc_try_format(ccdc, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	ccdc_try_format(ccdc, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * ccdc_get_format - Retrieve the video format on a pad
+ * @sd : ISP CCDC V4L2 subdevice
+ * @fh : V4L2 subdev file handle
+ * @fmt: Format
+ *
+ * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
+ * to the format type.
+ */
+static int ccdc_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccdc_get_format(ccdc, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * ccdc_set_format - Set the video format on a pad
+ * @sd : ISP CCDC V4L2 subdevice
+ * @fh : V4L2 subdev file handle
+ * @fmt: Format
+ *
+ * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
+ * to the format type.
+ */
+static int ccdc_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccdc_get_format(ccdc, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	ccdc_try_format(ccdc, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == CCDC_PAD_SINK) {
+		format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SOURCE_OF,
+					   fmt->which);
+		*format = fmt->format;
+		ccdc_try_format(ccdc, fh, CCDC_PAD_SOURCE_OF, format,
+				fmt->which);
+
+		format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SOURCE_VP,
+					   fmt->which);
+		*format = fmt->format;
+		ccdc_try_format(ccdc, fh, CCDC_PAD_SOURCE_VP, format,
+				fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * ccdc_init_formats - Initialize formats on all pads
+ * @sd: ISP CCDC V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int ccdc_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = CCDC_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	ccdc_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/* V4L2 subdev core operations */
+static const struct v4l2_subdev_core_ops ccdc_v4l2_core_ops = {
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.ioctl = ccdc_ioctl,
+	.subscribe_event = ccdc_subscribe_event,
+	.unsubscribe_event = ccdc_unsubscribe_event,
+};
+
+/* V4L2 subdev file operations */
+static const struct v4l2_subdev_file_ops ccdc_v4l2_file_ops = {
+	.open = ccdc_init_formats,
+};
+
+/* V4L2 subdev video operations */
+static const struct v4l2_subdev_video_ops ccdc_v4l2_video_ops = {
+	.s_stream = ccdc_set_stream,
+};
+
+/* V4L2 subdev pad operations */
+static const struct v4l2_subdev_pad_ops ccdc_v4l2_pad_ops = {
+	.enum_mbus_code = ccdc_enum_mbus_code,
+	.enum_frame_size = ccdc_enum_frame_size,
+	.get_fmt = ccdc_get_format,
+	.set_fmt = ccdc_set_format,
+};
+
+/* V4L2 subdev operations */
+static const struct v4l2_subdev_ops ccdc_v4l2_ops = {
+	.core = &ccdc_v4l2_core_ops,
+	.file = &ccdc_v4l2_file_ops,
+	.video = &ccdc_v4l2_video_ops,
+	.pad = &ccdc_v4l2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * ccdc_link_setup - Setup CCDC connections
+ * @entity: CCDC media entity
+ * @local: Pad at the local end of the link
+ * @remote: Pad at the remote end of the link
+ * @flags: Link flags
+ *
+ * return -EINVAL or zero on success
+ */
+static int ccdc_link_setup(struct media_entity *entity,
+			   const struct media_pad *local,
+			   const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = to_isp_device(ccdc);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case CCDC_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* Read from the sensor (parallel interface), CCP2, CSI2a or
+		 * CSI2c.
+		 */
+		if (!(flags & MEDIA_LNK_FL_ENABLED)) {
+			ccdc->input = CCDC_INPUT_NONE;
+			break;
+		}
+
+		if (ccdc->input != CCDC_INPUT_NONE)
+			return -EBUSY;
+
+		if (remote->entity == &isp->isp_ccp2.subdev.entity)
+			ccdc->input = CCDC_INPUT_CCP2B;
+		else if (remote->entity == &isp->isp_csi2a.subdev.entity)
+			ccdc->input = CCDC_INPUT_CSI2A;
+		else if (remote->entity == &isp->isp_csi2c.subdev.entity)
+			ccdc->input = CCDC_INPUT_CSI2C;
+		else
+			ccdc->input = CCDC_INPUT_PARALLEL;
+
+		break;
+
+	/*
+	 * The ISP core doesn't support pipelines with multiple video outputs.
+	 * Revisit this when it will be implemented, and return -EBUSY for now.
+	 */
+
+	case CCDC_PAD_SOURCE_VP | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* Write to preview engine, histogram and H3A. When none of
+		 * those links are active, the video port can be disabled.
+		 */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccdc->output & ~CCDC_OUTPUT_PREVIEW)
+				return -EBUSY;
+			ccdc->output |= CCDC_OUTPUT_PREVIEW;
+		} else {
+			ccdc->output &= ~CCDC_OUTPUT_PREVIEW;
+		}
+		break;
+
+	case CCDC_PAD_SOURCE_OF | MEDIA_ENT_T_DEVNODE:
+		/* Write to memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccdc->output & ~CCDC_OUTPUT_MEMORY)
+				return -EBUSY;
+			ccdc->output |= CCDC_OUTPUT_MEMORY;
+		} else {
+			ccdc->output &= ~CCDC_OUTPUT_MEMORY;
+		}
+		break;
+
+	case CCDC_PAD_SOURCE_OF | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* Write to resizer */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccdc->output & ~CCDC_OUTPUT_RESIZER)
+				return -EBUSY;
+			ccdc->output |= CCDC_OUTPUT_RESIZER;
+		} else {
+			ccdc->output &= ~CCDC_OUTPUT_RESIZER;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations ccdc_media_ops = {
+	.link_setup = ccdc_link_setup,
+};
+
+/*
+ * ccdc_init_entities - Initialize V4L2 subdev and media entity
+ * @ccdc: ISP CCDC module
+ *
+ * Return 0 on success and a negative error code on failure.
+ */
+static int ccdc_init_entities(struct isp_ccdc_device *ccdc)
+{
+	struct v4l2_subdev *sd = &ccdc->subdev;
+	struct media_pad *pads = ccdc->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	ccdc->input = CCDC_INPUT_NONE;
+
+	v4l2_subdev_init(sd, &ccdc_v4l2_ops);
+	strlcpy(sd->name, "OMAP3 ISP CCDC", sizeof(sd->name));
+	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, ccdc);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sd->nevents = OMAP3ISP_CCDC_NEVENTS;
+
+	v4l2_ctrl_handler_init(&ccdc->ctrls, 1);
+	sd->ctrl_handler = &ccdc->ctrls;
+
+	pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_INPUT;
+	pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_OUTPUT;
+	pads[CCDC_PAD_SOURCE_OF].flags = MEDIA_PAD_FL_OUTPUT;
+
+	me->ops = &ccdc_media_ops;
+	ret = media_entity_init(me, CCDC_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	ccdc_init_formats(sd, NULL);
+
+	ccdc->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	ccdc->video_out.ops = &ccdc_video_ops;
+	ccdc->video_out.isp = to_isp_device(ccdc);
+	ccdc->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
+	ccdc->video_out.bpl_alignment = 32;
+
+	ret = omap3isp_video_init(&ccdc->video_out, "CCDC");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the CCDC subdev to the video node. */
+	ret = media_entity_create_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF,
+			&ccdc->video_out.video.entity, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
+{
+	media_entity_cleanup(&ccdc->subdev.entity);
+
+	v4l2_device_unregister_subdev(&ccdc->subdev);
+	v4l2_ctrl_handler_free(&ccdc->ctrls);
+	omap3isp_video_unregister(&ccdc->video_out);
+}
+
+int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
+	struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video node. */
+	ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&ccdc->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_ccdc_unregister_entities(ccdc);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CCDC initialisation and cleanup
+ */
+
+/*
+ * omap3isp_ccdc_init - CCDC module initialization.
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ *
+ * TODO: Get the initialisation values from platform data.
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+int omap3isp_ccdc_init(struct isp_device *isp)
+{
+	struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+
+	spin_lock_init(&ccdc->lock);
+	init_waitqueue_head(&ccdc->wait);
+	mutex_init(&ccdc->ioctl_lock);
+
+	ccdc->stopping = CCDC_STOP_NOT_REQUESTED;
+
+	INIT_WORK(&ccdc->lsc.table_work, ccdc_lsc_free_table_work);
+	ccdc->lsc.state = LSC_STATE_STOPPED;
+	INIT_LIST_HEAD(&ccdc->lsc.free_queue);
+	spin_lock_init(&ccdc->lsc.req_lock);
+
+	ccdc->syncif.ccdc_mastermode = 0;
+	ccdc->syncif.datapol = 0;
+	ccdc->syncif.datsz = 0;
+	ccdc->syncif.fldmode = 0;
+	ccdc->syncif.fldout = 0;
+	ccdc->syncif.fldpol = 0;
+	ccdc->syncif.fldstat = 0;
+	ccdc->syncif.hdpol = 0;
+	ccdc->syncif.vdpol = 0;
+
+	ccdc->clamp.oblen = 0;
+	ccdc->clamp.dcsubval = 0;
+
+	ccdc->vpcfg.pixelclk = 0;
+
+	ccdc->update = OMAP3ISP_CCDC_BLCLAMP;
+	ccdc_apply_controls(ccdc);
+
+	return ccdc_init_entities(ccdc);
+}
+
+/*
+ * omap3isp_ccdc_cleanup - CCDC module cleanup.
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ */
+void omap3isp_ccdc_cleanup(struct isp_device *isp)
+{
+	struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+
+	/* Free LSC requests. As the CCDC is stopped there's no active request,
+	 * so only the pending request and the free queue need to be handled.
+	 */
+	ccdc_lsc_free_request(ccdc, ccdc->lsc.request);
+	cancel_work_sync(&ccdc->lsc.table_work);
+	ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue);
+
+	if (ccdc->fpc.fpcaddr != 0)
+		iommu_vfree(isp->iommu, ccdc->fpc.fpcaddr);
+}
diff --git a/drivers/media/video/isp/ispccdc.h b/drivers/media/video/isp/ispccdc.h
new file mode 100644
index 0000000..5c00e2c
--- /dev/null
+++ b/drivers/media/video/isp/ispccdc.h
@@ -0,0 +1,223 @@
+/*
+ * ispccdc.h
+ *
+ * TI OMAP3 ISP - CCDC module
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_CCDC_H
+#define OMAP3_ISP_CCDC_H
+
+#include <linux/omap3isp.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-ctrls.h>
+
+#include "ispvideo.h"
+
+enum ccdc_input_entity {
+	CCDC_INPUT_NONE,
+	CCDC_INPUT_PARALLEL,
+	CCDC_INPUT_CSI2A,
+	CCDC_INPUT_CCP2B,
+	CCDC_INPUT_CSI2C
+};
+
+#define CCDC_OUTPUT_MEMORY	(1 << 0)
+#define CCDC_OUTPUT_PREVIEW	(1 << 1)
+#define CCDC_OUTPUT_RESIZER	(1 << 2)
+
+#define	OMAP3ISP_CCDC_NEVENTS	16
+
+/*
+ * struct ispccdc_syncif - Structure for Sync Interface between sensor and CCDC
+ * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave.
+ * @fldstat: Field state. 0 - Odd Field, 1 - Even Field.
+ * @datsz: Data size.
+ * @fldmode: 0 - Progressive, 1 - Interlaced.
+ * @datapol: 0 - Positive, 1 - Negative.
+ * @fldpol: 0 - Positive, 1 - Negative.
+ * @hdpol: 0 - Positive, 1 - Negative.
+ * @vdpol: 0 - Positive, 1 - Negative.
+ * @fldout: 0 - Input, 1 - Output.
+ * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output.
+ * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output.
+ * @ppln: Number of pixels per line, used for HS/VS Output.
+ * @hlprf: Number of half lines per frame, used for HS/VS Output.
+ * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode.
+ */
+struct ispccdc_syncif {
+	u8 ccdc_mastermode;
+	u8 fldstat;
+	u8 datsz;
+	u8 fldmode;
+	u8 datapol;
+	u8 fldpol;
+	u8 hdpol;
+	u8 vdpol;
+	u8 fldout;
+	u8 hs_width;
+	u8 vs_width;
+	u8 ppln;
+	u8 hlprf;
+	u8 bt_r656_en;
+};
+
+/*
+ * struct ispccdc_vp - Structure for Video Port parameters
+ * @pixelclk: Input pixel clock in Hz
+ */
+struct ispccdc_vp {
+	unsigned int pixelclk;
+};
+
+enum ispccdc_lsc_state {
+	LSC_STATE_STOPPED = 0,
+	LSC_STATE_STOPPING = 1,
+	LSC_STATE_RUNNING = 2,
+	LSC_STATE_RECONFIG = 3,
+};
+
+struct ispccdc_lsc_config_req {
+	struct list_head list;
+	struct omap3isp_ccdc_lsc_config config;
+	unsigned char enable;
+	u32 table;
+	struct iovm_struct *iovm;
+};
+
+/*
+ * ispccdc_lsc - CCDC LSC parameters
+ * @update_config: Set when user changes config
+ * @request_enable: Whether LSC is requested to be enabled
+ * @config: LSC config set by user
+ * @update_table: Set when user provides a new LSC table to table_new
+ * @table_new: LSC table set by user, ISP address
+ * @table_inuse: LSC table currently in use, ISP address
+ */
+struct ispccdc_lsc {
+	enum ispccdc_lsc_state state;
+	struct work_struct table_work;
+
+	/* LSC queue of configurations */
+	spinlock_t req_lock;
+	struct ispccdc_lsc_config_req *request;	/* requested configuration */
+	struct ispccdc_lsc_config_req *active;	/* active configuration */
+	struct list_head free_queue;	/* configurations for freeing */
+};
+
+#define CCDC_STOP_NOT_REQUESTED		0x00
+#define CCDC_STOP_REQUEST		0x01
+#define CCDC_STOP_EXECUTED		(0x02 | CCDC_STOP_REQUEST)
+#define CCDC_STOP_CCDC_FINISHED		0x04
+#define CCDC_STOP_LSC_FINISHED		0x08
+#define CCDC_STOP_FINISHED		\
+	(CCDC_STOP_EXECUTED | CCDC_STOP_CCDC_FINISHED | CCDC_STOP_LSC_FINISHED)
+
+#define CCDC_EVENT_VD1			0x10
+#define CCDC_EVENT_VD0			0x20
+#define CCDC_EVENT_LSC_DONE		0x40
+
+/* Sink and source CCDC pads */
+#define CCDC_PAD_SINK			0
+#define CCDC_PAD_SOURCE_OF		1
+#define CCDC_PAD_SOURCE_VP		2
+#define CCDC_PADS_NUM			3
+
+/*
+ * struct isp_ccdc_device - Structure for the CCDC module to store its own
+ *			    information
+ * @subdev: V4L2 subdevice
+ * @pads: Sink and source media entity pads
+ * @formats: Active video formats
+ * @ctrls: V4L2 controls handler
+ * @input: Active input
+ * @output: Active outputs
+ * @video_out: Output video node
+ * @error: A hardware error occured during capture
+ * @alaw: A-law compression enabled (1) or disabled (0)
+ * @lpf: Low pass filter enabled (1) or disabled (0)
+ * @obclamp: Optical-black clamp enabled (1) or disabled (0)
+ * @fpc_en: Faulty pixels correction enabled (1) or disabled (0)
+ * @blcomp: Black level compensation configuration
+ * @clamp: Optical-black or digital clamp configuration
+ * @fpc: Faulty pixels correction configuration
+ * @lsc: Lens shading compensation configuration
+ * @update: Bitmask of controls to update during the next interrupt
+ * @shadow_update: Controls update in progress by userspace
+ * @syncif: Interface synchronization configuration
+ * @vpcfg: Video port configuration
+ * @underrun: A buffer underrun occured and a new buffer has been queued
+ * @state: Streaming state
+ * @lock: Serializes shadow_update with interrupt handler
+ * @wait: Wait queue used to stop the module
+ * @stopping: Stopping state
+ * @ioctl_lock: Serializes ioctl calls and LSC requests freeing
+ */
+struct isp_ccdc_device {
+	struct v4l2_subdev subdev;
+	struct media_pad pads[CCDC_PADS_NUM];
+	struct v4l2_mbus_framefmt formats[CCDC_PADS_NUM];
+
+	struct v4l2_ctrl_handler ctrls;
+
+	enum ccdc_input_entity input;
+	unsigned int output;
+	struct isp_video video_out;
+	unsigned int error;
+
+	unsigned int alaw:1,
+		     lpf:1,
+		     obclamp:1,
+		     fpc_en:1;
+	struct omap3isp_ccdc_blcomp blcomp;
+	struct omap3isp_ccdc_bclamp clamp;
+	struct omap3isp_ccdc_fpc fpc;
+	struct ispccdc_lsc lsc;
+	unsigned int update;
+	unsigned int shadow_update;
+
+	struct ispccdc_syncif syncif;
+	struct ispccdc_vp vpcfg;
+
+	unsigned int underrun:1;
+	enum isp_pipeline_stream_state state;
+	spinlock_t lock;
+	wait_queue_head_t wait;
+	unsigned int stopping;
+	struct mutex ioctl_lock;
+};
+
+struct isp_device;
+
+int omap3isp_ccdc_init(struct isp_device *isp);
+void omap3isp_ccdc_cleanup(struct isp_device *isp);
+int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
+	struct v4l2_device *vdev);
+void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc);
+
+int omap3isp_ccdc_busy(struct isp_ccdc_device *isp_ccdc);
+int omap3isp_ccdc_isr(struct isp_ccdc_device *isp_ccdc, u32 events);
+void omap3isp_ccdc_restore_context(struct isp_device *isp);
+void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc,
+	unsigned int *max_rate);
+
+#endif	/* OMAP3_ISP_CCDC_H */
diff --git a/drivers/media/video/isp/ispccp2.c b/drivers/media/video/isp/ispccp2.c
new file mode 100644
index 0000000..efcf827
--- /dev/null
+++ b/drivers/media/video/isp/ispccp2.c
@@ -0,0 +1,1189 @@
+/*
+ * ispccp2.c
+ *
+ * TI OMAP3 ISP - CCP2 module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispccp2.h"
+
+/* Number of LCX channels */
+#define CCP2_LCx_CHANS_NUM			3
+/* Max/Min size for CCP2 video port */
+#define ISPCCP2_DAT_START_MIN			0
+#define ISPCCP2_DAT_START_MAX			4095
+#define ISPCCP2_DAT_SIZE_MIN			0
+#define ISPCCP2_DAT_SIZE_MAX			4095
+#define ISPCCP2_VPCLK_FRACDIV			65536
+#define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP	0x12
+#define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP	0x16
+/* Max/Min size for CCP2 memory channel */
+#define ISPCCP2_LCM_HSIZE_COUNT_MIN		16
+#define ISPCCP2_LCM_HSIZE_COUNT_MAX		8191
+#define ISPCCP2_LCM_HSIZE_SKIP_MIN		0
+#define ISPCCP2_LCM_HSIZE_SKIP_MAX		8191
+#define ISPCCP2_LCM_VSIZE_MIN			1
+#define ISPCCP2_LCM_VSIZE_MAX			8191
+#define ISPCCP2_LCM_HWORDS_MIN			1
+#define ISPCCP2_LCM_HWORDS_MAX			4095
+#define ISPCCP2_LCM_CTRL_BURST_SIZE_32X		5
+#define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL	0
+#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10	2
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8	2
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10	3
+#define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10	3
+#define ISPCCP2_LCM_CTRL_DST_PORT_VP		0
+#define ISPCCP2_LCM_CTRL_DST_PORT_MEM		1
+
+/* Set only the required bits */
+#define BIT_SET(var, shift, mask, val)			\
+	do {						\
+		var = ((var) & ~((mask) << (shift)))	\
+			| ((val) << (shift));		\
+	} while (0)
+
+/*
+ * ccp2_print_status - Print current CCP2 module register values.
+ */
+#define CCP2_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))
+
+static void ccp2_print_status(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");
+
+	CCP2_PRINT_REGISTER(isp, SYSCONFIG);
+	CCP2_PRINT_REGISTER(isp, SYSSTATUS);
+	CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
+	CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
+	CCP2_PRINT_REGISTER(isp, CTRL);
+	CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
+	CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
+	CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
+	CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
+	CCP2_PRINT_REGISTER(isp, LCM_CTRL);
+	CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
+	CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
+	CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
+	CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
+	CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
+	CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
+	CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * ccp2_reset - Reset the CCP2
+ * @ccp2: pointer to ISP CCP2 device
+ */
+static void ccp2_reset(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	int i = 0;
+
+	/* Reset the CSI1/CCP2B and wait for reset to complete */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
+		    ISPCCP2_SYSCONFIG_SOFT_RESET);
+	while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
+		 ISPCCP2_SYSSTATUS_RESET_DONE)) {
+		udelay(10);
+		if (i++ > 10) {  /* try read 10 times */
+			dev_warn(isp->dev,
+				"omap3_isp: timeout waiting for ccp2 reset\n");
+			break;
+		}
+	}
+}
+
+/*
+ * ccp2_pwr_cfg - Configure the power mode settings
+ * @ccp2: pointer to ISP CCP2 device
+ */
+static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
+			((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
+                          ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
+}
+
+/*
+ * ccp2_if_enable - Enable CCP2 interface.
+ * @ccp2: pointer to ISP CCP2 device
+ * @enable: enable/disable flag
+ */
+static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	int i;
+
+	/* Enable/Disable all the LCx channels */
+	for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
+		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
+				ISPCCP2_LCx_CTRL_CHAN_EN,
+				enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);
+
+	/* Enable/Disable ccp2 interface in ccp2 mode */
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+			ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
+			enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
+
+	/* For frame count propagation */
+	if (pipe->do_propagation) {
+		/* We may want the Frame Start IRQ from LC0 */
+		if (enable)
+			isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2,
+				    ISPCCP2_LC01_IRQENABLE,
+				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
+		else
+			isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCP2,
+				    ISPCCP2_LC01_IRQENABLE,
+				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
+	}
+}
+
+/*
+ * ccp2_mem_enable - Enable CCP2 memory interface.
+ * @ccp2: pointer to ISP CCP2 device
+ * @enable: enable/disable flag
+ */
+static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	if (enable)
+		ccp2_if_enable(ccp2, 0);
+
+	/* Enable/Disable ccp2 interface in ccp2 mode */
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+			ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
+			ISPCCP2_LCM_CTRL_CHAN_EN,
+			enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
+}
+
+/*
+ * ccp2_phyif_config - Initialize CCP2 phy interface config
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: CCP2 platform data
+ *
+ * Configure the CCP2 physical interface module from platform data.
+ *
+ * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
+ */
+static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
+			     const struct isp_ccp2_platform_data *pdata)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val;
+
+	/* CCP2B mode */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
+			    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE;
+	/* Data/strobe physical layer */
+	BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
+		pdata->phy_layer);
+	BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
+		pdata->strobe_clk_pol);
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+	if (!(val & ISPCCP2_CTRL_MODE)) {
+		if (pdata->ccp2_mode)
+			dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
+		if (pdata->phy_layer == ISPCCP2_CTRL_PHY_SEL_STROBE)
+			/* Strobe mode requires CCP2 */
+			return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * ccp2_vp_config - Initialize CCP2 video port interface.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vpclk_div: Video port divisor
+ *
+ * Configure the CCP2 video port with the given clock divisor. The valid divisor
+ * values depend on the ISP revision:
+ *
+ * - revision 1.0 and 2.0	1 to 4
+ * - revision 15.0		1 to 65536
+ *
+ * The exact divisor value used might differ from the requested value, as ISP
+ * revision 15.0 represent the divisor by 65536 divided by an integer.
+ */
+static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
+			   unsigned int vpclk_div)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val;
+
+	/* ISPCCP2_CTRL Video port */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+	val |= ISPCCP2_CTRL_VP_ONLY_EN;	/* Disable the memory write port */
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
+		vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
+		BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
+			ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
+	} else {
+		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
+		BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
+			ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
+	}
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
+}
+
+/*
+ * ccp2_lcx_config - Initialize CCP2 logical channel interface.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: Pointer to ISP LCx config structure.
+ *
+ * This will analyze the parameters passed by the interface config
+ * and configure CSI1/CCP2 logical channel
+ *
+ */
+static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
+			    struct isp_interface_lcx_config *config)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 val, format;
+
+	switch (config->format) {
+	case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8:
+		format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
+		break;
+	case V4L2_MBUS_FMT_SGRBG10_1X10:
+	default:
+		format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP;	/* RAW10+VP */
+		break;
+	}
+	/* ISPCCP2_LCx_CTRL logical channel #0 */
+	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
+			    | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		/* CRC */
+		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
+			ISPCCP2_LCx_CTRL_CRC_MASK,
+			config->crc);
+		/* Format = RAW10+VP or RAW8+DPCM10+VP*/
+		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
+			ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
+	} else {
+		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
+			ISPCCP2_LCx_CTRL_CRC_MASK,
+			config->crc);
+
+		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
+			ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
+	}
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));
+
+	/* ISPCCP2_DAT_START for logical channel #0 */
+	isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));
+
+	/* ISPCCP2_DAT_SIZE for logical channel #0 */
+	isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));
+
+	/* Enable error IRQs for logical channel #0 */
+	val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
+	      ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
+}
+
+/*
+ * ccp2_if_configure - Configure ccp2 with data from sensor
+ * @ccp2: Pointer to ISP CCP2 device
+ *
+ * Return 0 on success or a negative error code
+ */
+static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
+{
+	const struct isp_v4l2_subdevs_group *pdata;
+	struct v4l2_mbus_framefmt *format;
+	struct media_pad *pad;
+	struct v4l2_subdev *sensor;
+	u32 lines = 0;
+	int ret;
+
+	ccp2_pwr_cfg(ccp2);
+
+	pad = media_entity_remote_source(&ccp2->pads[CCP2_PAD_SINK]);
+	sensor = media_entity_to_v4l2_subdev(pad->entity);
+	pdata = sensor->host_priv;
+
+	ret = ccp2_phyif_config(ccp2, &pdata->bus.ccp2);
+	if (ret < 0)
+		return ret;
+
+	ccp2_vp_config(ccp2, pdata->bus.ccp2.vpclk_div + 1);
+
+	v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);
+
+	format = &ccp2->formats[CCP2_PAD_SINK];
+
+	ccp2->if_cfg.data_start = lines;
+	ccp2->if_cfg.crc = pdata->bus.ccp2.crc;
+	ccp2->if_cfg.format = format->code;
+	ccp2->if_cfg.data_size = format->height;
+
+	ccp2_lcx_config(ccp2, &ccp2->if_cfg);
+
+	return 0;
+}
+
+static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	struct isp_device *isp = to_isp_device(ccp2);
+	const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
+	unsigned long l3_ick = pipe->l3_ick;
+	struct v4l2_fract *timeperframe;
+	unsigned int vpclk_div = 2;
+	unsigned int value;
+	u64 bound;
+	u64 area;
+
+	/* Compute the minimum clock divisor, based on the pipeline maximum
+	 * data rate. This is an absolute lower bound if we don't want SBL
+	 * overflows, so round the value up.
+	 */
+	vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
+			  vpclk_div);
+
+	/* Compute the maximum clock divisor, based on the requested frame rate.
+	 * This is a soft lower bound to achieve a frame rate equal or higher
+	 * than the requested value, so round the value down.
+	 */
+	timeperframe = &pipe->max_timeperframe;
+
+	if (timeperframe->numerator) {
+		area = ofmt->width * ofmt->height;
+		bound = div_u64(area * timeperframe->denominator,
+				timeperframe->numerator);
+		value = min_t(u64, bound, l3_ick);
+		vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
+	}
+
+	dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
+		vpclk_div);
+
+	return vpclk_div;
+}
+
+/*
+ * ccp2_mem_configure - Initialize CCP2 memory input/output interface
+ * @ccp2: Pointer to ISP CCP2 device
+ * @config: Pointer to ISP mem interface config structure
+ *
+ * This will analyze the parameters passed by the interface config
+ * structure, and configure the respective registers for proper
+ * CSI1/CCP2 memory input.
+ */
+static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
+			       struct isp_interface_mem_config *config)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
+	u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
+	unsigned int dpcm_decompress = 0;
+	u32 val, hwords;
+
+	if (sink_pixcode != source_pixcode &&
+	    sink_pixcode == V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8)
+		dpcm_decompress = 1;
+
+	ccp2_pwr_cfg(ccp2);
+
+	/* Hsize, Skip */
+	isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
+		       (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);
+
+	/* Vsize, no. of lines */
+	isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);
+
+	if (ccp2->video_in.bpl_padding == 0)
+		config->src_ofst = 0;
+	else
+		config->src_ofst = ccp2->video_in.bpl_value;
+
+	isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LCM_SRC_OFST);
+
+	/* Source and Destination formats */
+	val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
+	      ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;
+
+	if (dpcm_decompress) {
+		/* source format is RAW8 */
+		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
+		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
+
+		/* RAW8 + DPCM10 - simple predictor */
+		val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;
+
+		/* enable source DPCM decompression */
+		val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
+		       ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
+	} else {
+		/* source format is RAW10 */
+		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
+		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
+	}
+
+	/* Burst size to 32x64 */
+	val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
+	       ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;
+
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);
+
+	/* Prefetch setup */
+	if (dpcm_decompress)
+		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
+			  config->hsize_count) >> 3;
+	else
+		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
+			  config->hsize_count) >> 2;
+
+	isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);
+
+	/* Video port */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
+		    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
+	ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));
+
+	/* Clear LCM interrupts */
+	isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
+		       ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
+		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
+
+	/* Enable LCM interupts */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
+		    ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
+		    ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
+}
+
+/*
+ * ccp2_set_inaddr - Sets memory address of input frame.
+ * @ccp2: Pointer to ISP CCP2 device
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address from which the input frame is to be read.
+ */
+static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
+	struct isp_buffer *buffer;
+
+	buffer = omap3isp_video_buffer_next(&ccp2->video_in, ccp2->error);
+	if (buffer != NULL)
+		ccp2_set_inaddr(ccp2, buffer->isp_addr);
+
+	pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+
+	if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
+		if (isp_pipeline_ready(pipe))
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+	}
+
+	ccp2->error = 0;
+}
+
+/*
+ * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
+ * @ccp2: Pointer to ISP CCP2 device
+ *
+ * This will handle the CCP2 interrupts
+ *
+ * Returns -EIO in case of error, or 0 on success.
+ */
+int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
+{
+	struct isp_device *isp = to_isp_device(ccp2);
+	int ret = 0;
+	static const u32 ISPCCP2_LC01_ERROR =
+		ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
+		ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
+	u32 lcx_irqstatus, lcm_irqstatus;
+
+	/* First clear the interrupts */
+	lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
+				      ISPCCP2_LC01_IRQSTATUS);
+	isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LC01_IRQSTATUS);
+
+	lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
+				      ISPCCP2_LCM_IRQSTATUS);
+	isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
+		       ISPCCP2_LCM_IRQSTATUS);
+	/* Errors */
+	if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
+		ccp2->error = 1;
+		dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
+		return -EIO;
+	}
+
+	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
+		ccp2->error = 1;
+		dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
+		ret = -EIO;
+	}
+
+	if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
+		return 0;
+
+	/* Frame number propagation */
+	if (lcx_irqstatus & ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ) {
+		struct isp_pipeline *pipe =
+			to_isp_pipeline(&ccp2->subdev.entity);
+		if (pipe->do_propagation)
+			atomic_inc(&pipe->frame_number);
+	}
+
+	/* Handle queued buffers on frame end interrupts */
+	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
+		ccp2_isr_buffer(ccp2);
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static const unsigned int ccp2_fmts[] = {
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
+};
+
+/*
+ * __ccp2_get_format - helper function for getting ccp2 format
+ * @ccp2  : Pointer to ISP CCP2 device
+ * @fh    : V4L2 subdev file handle
+ * @pad   : pad number
+ * @which : wanted subdev format
+ * return format structure or NULL on error
+ */
+static struct v4l2_mbus_framefmt *
+__ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_fh *fh,
+		     unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &ccp2->formats[pad];
+}
+
+/*
+ * ccp2_try_format - Handle try format by pad subdev method
+ * @ccp2  : Pointer to ISP CCP2 device
+ * @fh    : V4L2 subdev file handle
+ * @pad   : pad num
+ * @fmt   : pointer to v4l2 mbus format structure
+ * @which : wanted subdev format
+ */
+static void ccp2_try_format(struct isp_ccp2_device *ccp2,
+			       struct v4l2_subdev_fh *fh, unsigned int pad,
+			       struct v4l2_mbus_framefmt *fmt,
+			       enum v4l2_subdev_format_whence which)
+{
+	struct v4l2_mbus_framefmt *format;
+
+	switch (pad) {
+	case CCP2_PAD_SINK:
+		if (fmt->code != V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8)
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+
+		if (ccp2->input == CCP2_INPUT_SENSOR) {
+			fmt->width = clamp_t(u32, fmt->width,
+					     ISPCCP2_DAT_START_MIN,
+					     ISPCCP2_DAT_START_MAX);
+			fmt->height = clamp_t(u32, fmt->height,
+					      ISPCCP2_DAT_SIZE_MIN,
+					      ISPCCP2_DAT_SIZE_MAX);
+		} else if (ccp2->input == CCP2_INPUT_MEMORY) {
+			fmt->width = clamp_t(u32, fmt->width,
+					     ISPCCP2_LCM_HSIZE_COUNT_MIN,
+					     ISPCCP2_LCM_HSIZE_COUNT_MAX);
+			fmt->height = clamp_t(u32, fmt->height,
+					      ISPCCP2_LCM_VSIZE_MIN,
+					      ISPCCP2_LCM_VSIZE_MAX);
+		}
+		break;
+
+	case CCP2_PAD_SOURCE:
+		/* Source format - copy sink format and change pixel code
+		 * to SGRBG10_1X10 as we don't support CCP2 write to memory.
+		 * When CCP2 write to memory feature will be added this
+		 * should be changed properly.
+		 */
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+		fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+		break;
+	}
+
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+}
+
+/*
+ * ccp2_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	if (code->pad == CCP2_PAD_SINK) {
+		if (code->index >= ARRAY_SIZE(ccp2_fmts))
+			return -EINVAL;
+
+		code->code = ccp2_fmts[code->index];
+	} else {
+		if (code->index != 0)
+			return -EINVAL;
+
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK,
+					      V4L2_SUBDEV_FORMAT_TRY);
+		code->code = format->code;
+	}
+
+	return 0;
+}
+
+static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * ccp2_get_format - Handle get format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on sucess
+ */
+static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * ccp2_set_format - Handle set format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * returns zero
+ */
+static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	ccp2_try_format(ccp2, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == CCP2_PAD_SINK) {
+		format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SOURCE,
+					   fmt->which);
+		*format = fmt->format;
+		ccp2_try_format(ccp2, fh, CCP2_PAD_SOURCE, format, fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * ccp2_init_formats - Initialize formats on all pads
+ * @sd: ISP CCP2 V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = CCP2_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	ccp2_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/*
+ * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
+ * @sd    : pointer to v4l2 subdev structure
+ * @enable: 1 == Enable, 0 == Disable
+ * return zero
+ */
+static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = to_isp_device(ccp2);
+	struct device *dev = to_device(ccp2);
+	int ret;
+
+	if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+		atomic_set(&ccp2->stopping, 0);
+		ccp2->error = 0;
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (ccp2->phy) {
+			ret = omap3isp_csiphy_acquire(ccp2->phy);
+			if (ret < 0)
+				return ret;
+		}
+
+		ccp2_if_configure(ccp2);
+		ccp2_print_status(ccp2);
+
+		/* Enable CSI1/CCP2 interface */
+		ccp2_if_enable(ccp2, 1);
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
+			struct v4l2_mbus_framefmt *format;
+
+			format = &ccp2->formats[CCP2_PAD_SINK];
+
+			ccp2->mem_cfg.hsize_count = format->width;
+			ccp2->mem_cfg.vsize_count = format->height;
+			ccp2->mem_cfg.src_ofst = 0;
+
+			ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
+			ccp2_print_status(ccp2);
+		}
+		ccp2_mem_enable(ccp2, 1);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
+					      &ccp2->stopping))
+			dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
+		if (ccp2->input == CCP2_INPUT_MEMORY) {
+			ccp2_mem_enable(ccp2, 0);
+			omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
+		} else if (ccp2->input == CCP2_INPUT_SENSOR) {
+			/* Disable CSI1/CCP2 interface */
+			ccp2_if_enable(ccp2, 0);
+			if (ccp2->phy)
+				omap3isp_csiphy_release(ccp2->phy);
+		}
+		break;
+	}
+
+	ccp2->state = enable;
+	return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops ccp2_sd_core_ops = {
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+};
+
+/* subdev file operations */
+static const struct v4l2_subdev_file_ops ccp2_sd_file_ops = {
+	.open = ccp2_init_formats,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
+	.s_stream = ccp2_s_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
+	.enum_mbus_code = ccp2_enum_mbus_code,
+	.enum_frame_size = ccp2_enum_frame_size,
+	.get_fmt = ccp2_get_format,
+	.set_fmt = ccp2_set_format,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops ccp2_sd_ops = {
+	.core = &ccp2_sd_core_ops,
+	.file = &ccp2_sd_file_ops,
+	.video = &ccp2_sd_video_ops,
+	.pad = &ccp2_sd_pad_ops,
+};
+
+/* --------------------------------------------------------------------------
+ * ISP ccp2 video device node
+ */
+
+/*
+ * ccp2_video_queue - Queue video buffer.
+ * @video : Pointer to isp video structure
+ * @buffer: Pointer to isp_buffer structure
+ * return -EIO or zero on success
+ */
+static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
+{
+	struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;
+
+	ccp2_set_inaddr(ccp2, buffer->isp_addr);
+	return 0;
+}
+
+static const struct isp_video_operations ccp2_video_ops = {
+	.queue = ccp2_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * ccp2_link_setup - Setup ccp2 connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL on error or zero on success
+ */
+static int ccp2_link_setup(struct media_entity *entity,
+			   const struct media_pad *local,
+			   const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case CCP2_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+		/* read from memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccp2->input == CCP2_INPUT_SENSOR)
+				return -EBUSY;
+			ccp2->input = CCP2_INPUT_MEMORY;
+		} else {
+			if (ccp2->input == CCP2_INPUT_MEMORY)
+				ccp2->input = CCP2_INPUT_NONE;
+		}
+		break;
+
+	case CCP2_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* read from sensor/phy */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (ccp2->input == CCP2_INPUT_MEMORY)
+				return -EBUSY;
+			ccp2->input = CCP2_INPUT_SENSOR;
+		} else {
+			if (ccp2->input == CCP2_INPUT_SENSOR)
+				ccp2->input = CCP2_INPUT_NONE;
+		} break;
+
+	case CCP2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* write to video port/ccdc */
+		if (flags & MEDIA_LNK_FL_ENABLED)
+			ccp2->output = CCP2_OUTPUT_CCDC;
+		else
+			ccp2->output = CCP2_OUTPUT_NONE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations ccp2_media_ops = {
+	.link_setup = ccp2_link_setup,
+};
+
+/*
+ * ccp2_init_entities - Initialize ccp2 subdev and media entity.
+ * @ccp2: Pointer to ISP CCP2 device
+ * return negative error code or zero on success
+ */
+static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
+{
+	struct v4l2_subdev *sd = &ccp2->subdev;
+	struct media_pad *pads = ccp2->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	ccp2->input = CCP2_INPUT_NONE;
+	ccp2->output = CCP2_OUTPUT_NONE;
+
+	v4l2_subdev_init(sd, &ccp2_sd_ops);
+	strlcpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
+	sd->grp_id = 1 << 16;   /* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, ccp2);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	v4l2_ctrl_handler_init(&ccp2->ctrls, 1);
+	sd->ctrl_handler = &ccp2->ctrls;
+
+	pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_INPUT;
+	pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_OUTPUT;
+
+	me->ops = &ccp2_media_ops;
+	ret = media_entity_init(me, CCP2_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	ccp2_init_formats(sd, NULL);
+
+	/*
+	 * The CCP2 has weird line alignment requirements, possibly caused by
+	 * DPCM8 decompression. Line length for data read from memory must be a
+	 * multiple of 128 bits (16 bytes) in continuous mode (when no padding
+	 * is present at end of lines). Additionally, if padding is used, the
+	 * padded line length must be a multiple of 32 bytes. To simplify the
+	 * implementation we use a fixed 32 bytes alignment regardless of the
+	 * input format and width. If strict 128 bits alignment support is
+	 * required ispvideo will need to be made aware of this special dual
+	 * alignement requirements.
+	 */
+	ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccp2->video_in.bpl_alignment = 32;
+	ccp2->video_in.bpl_max = 0xffffffe0;
+	ccp2->video_in.isp = to_isp_device(ccp2);
+	ccp2->video_in.ops = &ccp2_video_ops;
+	ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
+
+	ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the video node to the ccp2 subdev. */
+	ret = media_entity_create_link(&ccp2->video_in.video.entity, 0,
+				       &ccp2->subdev.entity, CCP2_PAD_SINK, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
+ * @ccp2: Pointer to ISP CCP2 device
+ */
+void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
+{
+	media_entity_cleanup(&ccp2->subdev.entity);
+
+	v4l2_device_unregister_subdev(&ccp2->subdev);
+	v4l2_ctrl_handler_free(&ccp2->ctrls);
+	omap3isp_video_unregister(&ccp2->video_in);
+}
+
+/*
+ * omap3isp_ccp2_register_entities - Register the subdev media entity
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vdev: Pointer to v4l device
+ * return negative error code or zero on success
+ */
+
+int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
+				    struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&ccp2->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_ccp2_unregister_entities(ccp2);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP ccp2 initialisation and cleanup
+ */
+
+/*
+ * omap3isp_ccp2_cleanup - CCP2 un-initialization
+ * @isp : Pointer to ISP device
+ */
+void omap3isp_ccp2_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * omap3isp_ccp2_init - CCP2 initialization.
+ * @isp : Pointer to ISP device
+ * return negative error code or zero on success
+ */
+int omap3isp_ccp2_init(struct isp_device *isp)
+{
+	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+	int ret;
+
+	init_waitqueue_head(&ccp2->wait);
+
+	/* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
+	 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
+	 * configured.
+	 *
+	 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
+	 */
+	if (isp->revision == ISP_REVISION_15_0)
+		ccp2->phy = &isp->isp_csiphy1;
+
+	ret = ccp2_init_entities(ccp2);
+	if (ret < 0)
+		goto out;
+
+	ccp2_reset(ccp2);
+out:
+	if (ret)
+		omap3isp_ccp2_cleanup(isp);
+
+	return ret;
+}
diff --git a/drivers/media/video/isp/ispccp2.h b/drivers/media/video/isp/ispccp2.h
new file mode 100644
index 0000000..1c1504e
--- /dev/null
+++ b/drivers/media/video/isp/ispccp2.h
@@ -0,0 +1,101 @@
+/*
+ * ispccp2.h
+ *
+ * TI OMAP3 ISP - CCP2 module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_CCP2_H
+#define OMAP3_ISP_CCP2_H
+
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+
+struct isp_device;
+struct isp_csiphy;
+
+/* Sink and source ccp2 pads */
+#define CCP2_PAD_SINK			0
+#define CCP2_PAD_SOURCE			1
+#define CCP2_PADS_NUM			2
+
+/* CCP2 input media entity */
+enum ccp2_input_entity {
+	CCP2_INPUT_NONE,
+	CCP2_INPUT_SENSOR,
+	CCP2_INPUT_MEMORY,
+};
+
+/* CCP2 output media entity */
+enum ccp2_output_entity {
+	CCP2_OUTPUT_NONE,
+	CCP2_OUTPUT_CCDC,
+	CCP2_OUTPUT_MEMORY,
+};
+
+
+/* Logical channel configuration */
+struct isp_interface_lcx_config {
+	int crc;
+	u32 data_start;
+	u32 data_size;
+	u32 format;
+};
+
+/* Memory channel configuration */
+struct isp_interface_mem_config {
+	u32 dst_port;
+	u32 vsize_count;
+	u32 hsize_count;
+	u32 src_ofst;
+	u32 dst_ofst;
+};
+
+/* CCP2 device */
+struct isp_ccp2_device {
+	struct v4l2_subdev subdev;
+	struct v4l2_mbus_framefmt formats[CCP2_PADS_NUM];
+	struct media_pad pads[CCP2_PADS_NUM];
+
+	struct v4l2_ctrl_handler ctrls;
+
+	enum ccp2_input_entity input;
+	enum ccp2_output_entity output;
+	struct isp_interface_lcx_config if_cfg;
+	struct isp_interface_mem_config mem_cfg;
+	struct isp_video video_in;
+	struct isp_csiphy *phy;
+	unsigned int error;
+	enum isp_pipeline_stream_state state;
+	wait_queue_head_t wait;
+	atomic_t stopping;
+};
+
+/* Function declarations */
+int omap3isp_ccp2_init(struct isp_device *isp);
+void omap3isp_ccp2_cleanup(struct isp_device *isp);
+int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
+			struct v4l2_device *vdev);
+void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2);
+int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2);
+
+#endif	/* OMAP3_ISP_CCP2_H */
diff --git a/drivers/media/video/isp/ispcsi2.c b/drivers/media/video/isp/ispcsi2.c
new file mode 100644
index 0000000..30ced95
--- /dev/null
+++ b/drivers/media/video/isp/ispcsi2.c
@@ -0,0 +1,1332 @@
+/*
+ * ispcsi2.c
+ *
+ * TI OMAP3 ISP - CSI2 module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#include <linux/delay.h>
+#include <media/v4l2-common.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/mm.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispcsi2.h"
+
+/*
+ * csi2_if_enable - Enable CSI2 Receiver interface.
+ * @enable: enable flag
+ *
+ */
+static void csi2_if_enable(struct isp_device *isp,
+			   struct isp_csi2_device *csi2, u8 enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl;
+
+	isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN,
+			enable ? ISPCSI2_CTRL_IF_EN : 0);
+
+	currctrl->if_enable = enable;
+}
+
+/*
+ * csi2_recv_config - CSI2 receiver module configuration.
+ * @currctrl: isp_csi2_ctrl_cfg structure
+ *
+ */
+static void csi2_recv_config(struct isp_device *isp,
+			     struct isp_csi2_device *csi2,
+			     struct isp_csi2_ctrl_cfg *currctrl)
+{
+	u32 reg;
+
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL);
+
+	if (currctrl->frame_mode)
+		reg |= ISPCSI2_CTRL_FRAME;
+	else
+		reg &= ~ISPCSI2_CTRL_FRAME;
+
+	if (currctrl->vp_clk_enable)
+		reg |= ISPCSI2_CTRL_VP_CLK_EN;
+	else
+		reg &= ~ISPCSI2_CTRL_VP_CLK_EN;
+
+	if (currctrl->vp_only_enable)
+		reg |= ISPCSI2_CTRL_VP_ONLY_EN;
+	else
+		reg &= ~ISPCSI2_CTRL_VP_ONLY_EN;
+
+	reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK;
+	reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT;
+
+	if (currctrl->ecc_enable)
+		reg |= ISPCSI2_CTRL_ECC_EN;
+	else
+		reg &= ~ISPCSI2_CTRL_ECC_EN;
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL);
+}
+
+static const unsigned int csi2_input_fmts[] = {
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
+	V4L2_MBUS_FMT_SRGGB10_1X10,
+	V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8,
+	V4L2_MBUS_FMT_SBGGR10_1X10,
+	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8,
+	V4L2_MBUS_FMT_SGBRG10_1X10,
+	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8,
+};
+
+/* To set the format on the CSI2 requires a mapping function that takes
+ * the following inputs:
+ * - 2 different formats (at this time)
+ * - 2 destinations (mem, vp+mem) (vp only handled separately)
+ * - 2 decompression options (on, off)
+ * - 2 isp revisions (certain format must be handled differently on OMAP3630)
+ * Output should be CSI2 frame format code
+ * Array indices as follows: [format][dest][decompr][is_3630]
+ * Not all combinations are valid. 0 means invalid.
+ */
+static const u16 __csi2_fmt_map[2][2][2][2] = {
+	/* RAW10 formats */
+	{
+		/* Output to memory */
+		{
+			/* No DPCM decompression */
+			{ CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 },
+			/* DPCM decompression */
+			{ 0, 0 },
+		},
+		/* Output to both */
+		{
+			/* No DPCM decompression */
+			{ CSI2_PIX_FMT_RAW10_EXP16_VP,
+			  CSI2_PIX_FMT_RAW10_EXP16_VP },
+			/* DPCM decompression */
+			{ 0, 0 },
+		},
+	},
+	/* RAW10 DPCM8 formats */
+	{
+		/* Output to memory */
+		{
+			/* No DPCM decompression */
+			{ CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 },
+			/* DPCM decompression */
+			{ CSI2_PIX_FMT_RAW8_DPCM10_EXP16,
+			  CSI2_USERDEF_8BIT_DATA1_DPCM10 },
+		},
+		/* Output to both */
+		{
+			/* No DPCM decompression */
+			{ CSI2_PIX_FMT_RAW8_VP,
+			  CSI2_PIX_FMT_RAW8_VP },
+			/* DPCM decompression */
+			{ CSI2_PIX_FMT_RAW8_DPCM10_VP,
+			  CSI2_USERDEF_8BIT_DATA1_DPCM10_VP },
+		},
+	},
+};
+
+/*
+ * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID
+ * @csi2: ISP CSI2 device
+ *
+ * Returns CSI2 physical format id
+ */
+static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2)
+{
+	const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK];
+	int fmtidx, destidx, is_3630;
+
+	switch (fmt->code) {
+	case V4L2_MBUS_FMT_SGRBG10_1X10:
+	case V4L2_MBUS_FMT_SRGGB10_1X10:
+	case V4L2_MBUS_FMT_SBGGR10_1X10:
+	case V4L2_MBUS_FMT_SGBRG10_1X10:
+		fmtidx = 0;
+		break;
+	case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8:
+	case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8:
+	case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8:
+	case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8:
+		fmtidx = 1;
+		break;
+	default:
+		WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n",
+		     fmt->code);
+		return 0;
+	}
+
+	if (!(csi2->output & CSI2_OUTPUT_CCDC) &&
+	    !(csi2->output & CSI2_OUTPUT_MEMORY)) {
+		/* Neither output enabled is a valid combination */
+		return CSI2_PIX_FMT_OTHERS;
+	}
+
+	/* If we need to skip frames at the beginning of the stream disable the
+	 * video port to avoid sending the skipped frames to the CCDC.
+	 */
+	destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC);
+	is_3630 = csi2->isp->revision == ISP_REVISION_15_0;
+
+	return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630];
+}
+
+/*
+ * csi2_set_outaddr - Set memory address to save output image
+ * @csi2: Pointer to ISP CSI2a device.
+ * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary.
+ *
+ * Sets the memory address where the output will be saved.
+ *
+ * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte
+ * boundary.
+ */
+static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr)
+{
+	struct isp_device *isp = csi2->isp;
+	struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0];
+
+	ctx->ping_addr = ctx->pong_addr = addr;
+	isp_reg_writel(isp, ctx->ping_addr,
+		       csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
+	isp_reg_writel(isp, ctx->pong_addr,
+		       csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
+}
+
+/*
+ * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should
+ *			be enabled by CSI2.
+ * @format_id: mapped format id
+ *
+ */
+static inline int is_usr_def_mapping(u32 format_id)
+{
+	return (format_id & 0x40) ? 1 : 0;
+}
+
+/*
+ * csi2_ctx_enable - Enable specified CSI2 context
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @enable: enable
+ *
+ */
+static void csi2_ctx_enable(struct isp_device *isp,
+			    struct isp_csi2_device *csi2, u8 ctxnum, u8 enable)
+{
+	struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum];
+	unsigned int skip = 0;
+	u32 reg;
+
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
+
+	if (enable) {
+		if (csi2->frame_skip)
+			skip = csi2->frame_skip;
+		else if (csi2->output & CSI2_OUTPUT_MEMORY)
+			skip = 1;
+
+		reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK;
+		reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK
+		    |  (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT)
+		    |  ISPCSI2_CTX_CTRL1_CTX_EN;
+	} else {
+		reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN;
+	}
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum));
+	ctx->enabled = enable;
+}
+
+/*
+ * csi2_ctx_config - CSI2 context configuration.
+ * @ctx: context configuration
+ *
+ */
+static void csi2_ctx_config(struct isp_device *isp,
+			    struct isp_csi2_device *csi2,
+			    struct isp_csi2_ctx_cfg *ctx)
+{
+	u32 reg;
+
+	/* Set up CSI2_CTx_CTRL1 */
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
+
+	if (ctx->eof_enabled)
+		reg |= ISPCSI2_CTX_CTRL1_EOF_EN;
+	else
+		reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN;
+
+	if (ctx->eol_enabled)
+		reg |= ISPCSI2_CTX_CTRL1_EOL_EN;
+	else
+		reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN;
+
+	if (ctx->checksum_enabled)
+		reg |= ISPCSI2_CTX_CTRL1_CS_EN;
+	else
+		reg &= ~ISPCSI2_CTX_CTRL1_CS_EN;
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum));
+
+	/* Set up CSI2_CTx_CTRL2 */
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
+
+	reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK);
+	reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT;
+
+	reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK);
+	reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT;
+
+	if (ctx->dpcm_decompress) {
+		if (ctx->dpcm_predictor)
+			reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED;
+		else
+			reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED;
+	}
+
+	if (is_usr_def_mapping(ctx->format_id)) {
+		reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK;
+		reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT;
+	}
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum));
+
+	/* Set up CSI2_CTx_CTRL3 */
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
+	reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK);
+	reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT);
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum));
+
+	/* Set up CSI2_CTx_DAT_OFST */
+	reg = isp_reg_readl(isp, csi2->regs1,
+			    ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
+	reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK;
+	reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT;
+	isp_reg_writel(isp, reg, csi2->regs1,
+		       ISPCSI2_CTX_DAT_OFST(ctx->ctxnum));
+
+	isp_reg_writel(isp, ctx->ping_addr,
+		       csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum));
+
+	isp_reg_writel(isp, ctx->pong_addr,
+		       csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum));
+}
+
+/*
+ * csi2_timing_config - CSI2 timing configuration.
+ * @timing: csi2_timing_cfg structure
+ */
+static void csi2_timing_config(struct isp_device *isp,
+			       struct isp_csi2_device *csi2,
+			       struct isp_csi2_timing_cfg *timing)
+{
+	u32 reg;
+
+	reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING);
+
+	if (timing->force_rx_mode)
+		reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
+	else
+		reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum);
+
+	if (timing->stop_state_16x)
+		reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
+	else
+		reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum);
+
+	if (timing->stop_state_4x)
+		reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
+	else
+		reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum);
+
+	reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum);
+	reg |= timing->stop_state_counter <<
+	       ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum);
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING);
+}
+
+/*
+ * csi2_irq_ctx_set - Enables CSI2 Context IRQs.
+ * @enable: Enable/disable CSI2 Context interrupts
+ */
+static void csi2_irq_ctx_set(struct isp_device *isp,
+			     struct isp_csi2_device *csi2, int enable)
+{
+	u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ;
+	int i;
+
+	if (csi2->use_fs_irq)
+		reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ;
+
+	for (i = 0; i < 8; i++) {
+		isp_reg_writel(isp, reg, csi2->regs1,
+			       ISPCSI2_CTX_IRQSTATUS(i));
+		if (enable)
+			isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
+				    reg);
+		else
+			isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i),
+				    reg);
+	}
+}
+
+/*
+ * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs.
+ * @enable: Enable/disable CSI2 ComplexIO #1 interrupts
+ */
+static void csi2_irq_complexio1_set(struct isp_device *isp,
+				    struct isp_csi2_device *csi2, int enable)
+{
+	u32 reg;
+	reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT |
+		ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER |
+		ISPCSI2_PHY_IRQENABLE_STATEULPM5 |
+		ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 |
+		ISPCSI2_PHY_IRQENABLE_ERRESC5 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 |
+		ISPCSI2_PHY_IRQENABLE_STATEULPM4 |
+		ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 |
+		ISPCSI2_PHY_IRQENABLE_ERRESC4 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 |
+		ISPCSI2_PHY_IRQENABLE_STATEULPM3 |
+		ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 |
+		ISPCSI2_PHY_IRQENABLE_ERRESC3 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 |
+		ISPCSI2_PHY_IRQENABLE_STATEULPM2 |
+		ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 |
+		ISPCSI2_PHY_IRQENABLE_ERRESC2 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 |
+		ISPCSI2_PHY_IRQENABLE_STATEULPM1 |
+		ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 |
+		ISPCSI2_PHY_IRQENABLE_ERRESC1 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 |
+		ISPCSI2_PHY_IRQENABLE_ERRSOTHS1;
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
+	if (enable)
+		reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
+	else
+		reg = 0;
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE);
+}
+
+/*
+ * csi2_irq_status_set - Enables CSI2 Status IRQs.
+ * @enable: Enable/disable CSI2 Status interrupts
+ */
+static void csi2_irq_status_set(struct isp_device *isp,
+				struct isp_csi2_device *csi2, int enable)
+{
+	u32 reg;
+	reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
+		ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
+		ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ |
+		ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
+		ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
+		ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ |
+		ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ |
+		ISPCSI2_IRQSTATUS_CONTEXT(0);
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS);
+	if (enable)
+		reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE);
+	else
+		reg = 0;
+
+	isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE);
+}
+
+/*
+ * omap3isp_csi2_reset - Resets the CSI2 module.
+ *
+ * Must be called with the phy lock held.
+ *
+ * Returns 0 if successful, or -EBUSY if power command didn't respond.
+ */
+int omap3isp_csi2_reset(struct isp_csi2_device *csi2)
+{
+	struct isp_device *isp = csi2->isp;
+	u8 soft_reset_retries = 0;
+	u32 reg;
+	int i;
+
+	if (!csi2->available)
+		return -ENODEV;
+
+	if (csi2->phy->phy_in_use)
+		return -EBUSY;
+
+	isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
+		    ISPCSI2_SYSCONFIG_SOFT_RESET);
+
+	do {
+		reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) &
+				    ISPCSI2_SYSSTATUS_RESET_DONE;
+		if (reg == ISPCSI2_SYSSTATUS_RESET_DONE)
+			break;
+		soft_reset_retries++;
+		if (soft_reset_retries < 5)
+			udelay(100);
+	} while (soft_reset_retries < 5);
+
+	if (soft_reset_retries == 5) {
+		printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n");
+		return -EBUSY;
+	}
+
+	if (isp->revision == ISP_REVISION_15_0)
+		isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG,
+			    ISPCSI2_PHY_CFG_RESET_CTRL);
+
+	i = 100;
+	do {
+		reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1)
+		    & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK;
+		if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK)
+			break;
+		udelay(100);
+	} while (--i > 0);
+
+	if (i == 0) {
+		printk(KERN_ERR
+		       "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n");
+		return -EBUSY;
+	}
+
+	if (isp->autoidle)
+		isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
+				ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
+				ISPCSI2_SYSCONFIG_AUTO_IDLE,
+				ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART |
+				((isp->revision == ISP_REVISION_15_0) ?
+				 ISPCSI2_SYSCONFIG_AUTO_IDLE : 0));
+	else
+		isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG,
+				ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK |
+				ISPCSI2_SYSCONFIG_AUTO_IDLE,
+				ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO);
+
+	return 0;
+}
+
+static int csi2_configure(struct isp_csi2_device *csi2)
+{
+	const struct isp_v4l2_subdevs_group *pdata;
+	struct isp_device *isp = csi2->isp;
+	struct isp_csi2_timing_cfg *timing = &csi2->timing[0];
+	struct v4l2_subdev *sensor;
+	struct media_pad *pad;
+
+	/*
+	 * CSI2 fields that can be updated while the context has
+	 * been enabled or the interface has been enabled are not
+	 * updated dynamically currently. So we do not allow to
+	 * reconfigure if either has been enabled
+	 */
+	if (csi2->contexts[0].enabled || csi2->ctrl.if_enable)
+		return -EBUSY;
+
+	pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]);
+	sensor = media_entity_to_v4l2_subdev(pad->entity);
+	pdata = sensor->host_priv;
+
+	csi2->frame_skip = 0;
+	v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip);
+
+	csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div;
+	csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE;
+	csi2->ctrl.ecc_enable = pdata->bus.csi2.crc;
+
+	timing->ionum = 1;
+	timing->force_rx_mode = 1;
+	timing->stop_state_16x = 1;
+	timing->stop_state_4x = 1;
+	timing->stop_state_counter = 0x1FF;
+
+	/*
+	 * The CSI2 receiver can't do any format conversion except DPCM
+	 * decompression, so every set_format call configures both pads
+	 * and enables DPCM decompression as a special case:
+	 */
+	if (csi2->formats[CSI2_PAD_SINK].code !=
+	    csi2->formats[CSI2_PAD_SOURCE].code)
+		csi2->dpcm_decompress = true;
+	else
+		csi2->dpcm_decompress = false;
+
+	csi2->contexts[0].format_id = csi2_ctx_map_format(csi2);
+
+	if (csi2->video_out.bpl_padding == 0)
+		csi2->contexts[0].data_offset = 0;
+	else
+		csi2->contexts[0].data_offset = csi2->video_out.bpl_value;
+
+	/*
+	 * Enable end of frame and end of line signals generation for
+	 * context 0. These signals are generated from CSI2 receiver to
+	 * qualify the last pixel of a frame and the last pixel of a line.
+	 * Without enabling the signals CSI2 receiver writes data to memory
+	 * beyond buffer size and/or data line offset is not handled correctly.
+	 */
+	csi2->contexts[0].eof_enabled = 1;
+	csi2->contexts[0].eol_enabled = 1;
+
+	csi2_irq_complexio1_set(isp, csi2, 1);
+	csi2_irq_ctx_set(isp, csi2, 1);
+	csi2_irq_status_set(isp, csi2, 1);
+
+	/* Set configuration (timings, format and links) */
+	csi2_timing_config(isp, csi2, timing);
+	csi2_recv_config(isp, csi2, &csi2->ctrl);
+	csi2_ctx_config(isp, csi2, &csi2->contexts[0]);
+
+	return 0;
+}
+
+/*
+ * csi2_print_status - Prints CSI2 debug information.
+ */
+#define CSI2_PRINT_REGISTER(isp, regs, name)\
+	dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \
+		isp_reg_readl(isp, regs, ISPCSI2_##name))
+
+static void csi2_print_status(struct isp_csi2_device *csi2)
+{
+	struct isp_device *isp = csi2->isp;
+
+	if (!csi2->available)
+		return;
+
+	dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n");
+
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING);
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0));
+	CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0));
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+/*
+ * csi2_isr_buffer - Does buffer handling at end-of-frame
+ * when writing to memory.
+ */
+static void csi2_isr_buffer(struct isp_csi2_device *csi2)
+{
+	struct isp_device *isp = csi2->isp;
+	struct isp_buffer *buffer;
+
+	csi2_ctx_enable(isp, csi2, 0, 0);
+
+	buffer = omap3isp_video_buffer_next(&csi2->video_out, 0);
+
+	/*
+	 * Let video queue operation restart engine if there is an underrun
+	 * condition.
+	 */
+	if (buffer == NULL)
+		return;
+
+	csi2_set_outaddr(csi2, buffer->isp_addr);
+	csi2_ctx_enable(isp, csi2, 0, 1);
+}
+
+static void csi2_isr_ctx(struct isp_csi2_device *csi2,
+			 struct isp_csi2_ctx_cfg *ctx)
+{
+	struct isp_device *isp = csi2->isp;
+	unsigned int n = ctx->ctxnum;
+	u32 status;
+
+	status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
+	isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n));
+
+	/* Propagate frame number */
+	if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) {
+		struct isp_pipeline *pipe =
+				     to_isp_pipeline(&csi2->subdev.entity);
+		if (pipe->do_propagation)
+			atomic_inc(&pipe->frame_number);
+	}
+
+	if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ))
+		return;
+
+	/* Skip interrupts until we reach the frame skip count. The CSI2 will be
+	 * automatically disabled, as the frame skip count has been programmed
+	 * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
+	 *
+	 * It would have been nice to rely on the FRAME_NUMBER interrupt instead
+	 * but it turned out that the interrupt is only generated when the CSI2
+	 * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased
+	 * correctly and reaches 0 when data is forwarded to the video port only
+	 * but no interrupt arrives). Maybe a CSI2 hardware bug.
+	 */
+	if (csi2->frame_skip) {
+		csi2->frame_skip--;
+		if (csi2->frame_skip == 0) {
+			ctx->format_id = csi2_ctx_map_format(csi2);
+			csi2_ctx_config(isp, csi2, ctx);
+			csi2_ctx_enable(isp, csi2, n, 1);
+		}
+		return;
+	}
+
+	if (csi2->output & CSI2_OUTPUT_MEMORY)
+		csi2_isr_buffer(csi2);
+}
+
+/*
+ * omap3isp_csi2_isr - CSI2 interrupt handling.
+ *
+ * Return -EIO on Transmission error
+ */
+int omap3isp_csi2_isr(struct isp_csi2_device *csi2)
+{
+	u32 csi2_irqstatus, cpxio1_irqstatus;
+	struct isp_device *isp = csi2->isp;
+	int retval = 0;
+
+	if (!csi2->available)
+		return -ENODEV;
+
+	csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS);
+	isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS);
+
+	/* Failure Cases */
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) {
+		cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1,
+						 ISPCSI2_PHY_IRQSTATUS);
+		isp_reg_writel(isp, cpxio1_irqstatus,
+			       csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
+		dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ "
+			"%x\n", cpxio1_irqstatus);
+		retval = -EIO;
+	}
+
+	if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
+			      ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
+			      ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
+			      ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
+			      ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
+		dev_dbg(isp->dev, "CSI2 Err:"
+			" OCP:%d,"
+			" Short_pack:%d,"
+			" ECC:%d,"
+			" CPXIO2:%d,"
+			" FIFO_OVF:%d,"
+			"\n",
+			(csi2_irqstatus &
+			 ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
+			(csi2_irqstatus &
+			 ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0,
+			(csi2_irqstatus &
+			 ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0,
+			(csi2_irqstatus &
+			 ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0,
+			(csi2_irqstatus &
+			 ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0);
+		retval = -EIO;
+	}
+
+	if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping))
+		return 0;
+
+	/* Successful cases */
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0))
+		csi2_isr_ctx(csi2, &csi2->contexts[0]);
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ)
+		dev_dbg(isp->dev, "CSI2: ECC correction done\n");
+
+	return retval;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+/*
+ * csi2_queue - Queues the first buffer when using memory output
+ * @video: The video node
+ * @buffer: buffer to queue
+ */
+static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer)
+{
+	struct isp_device *isp = video->isp;
+	struct isp_csi2_device *csi2 = &isp->isp_csi2a;
+
+	csi2_set_outaddr(csi2, buffer->isp_addr);
+
+	/*
+	 * If streaming was enabled before there was a buffer queued
+	 * or underrun happened in the ISR, the hardware was not enabled
+	 * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set.
+	 * Enable it now.
+	 */
+	if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) {
+		/* Enable / disable context 0 and IRQs */
+		csi2_if_enable(isp, csi2, 1);
+		csi2_ctx_enable(isp, csi2, 0, 1);
+		isp_video_dmaqueue_flags_clr(&csi2->video_out);
+	}
+
+	return 0;
+}
+
+static const struct isp_video_operations csi2_ispvideo_ops = {
+	.queue = csi2_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static struct v4l2_mbus_framefmt *
+__csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh,
+		  unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &csi2->formats[pad];
+}
+
+static void
+csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh,
+		unsigned int pad, struct v4l2_mbus_framefmt *fmt,
+		enum v4l2_subdev_format_whence which)
+{
+	enum v4l2_mbus_pixelcode pixelcode;
+	struct v4l2_mbus_framefmt *format;
+	const struct isp_format_info *info;
+	unsigned int i;
+
+	switch (pad) {
+	case CSI2_PAD_SINK:
+		/* Clamp the width and height to valid range (1-8191). */
+		for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) {
+			if (fmt->code == csi2_input_fmts[i])
+				break;
+		}
+
+		/* If not found, use SGRBG10 as default */
+		if (i >= ARRAY_SIZE(csi2_input_fmts))
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+
+		fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+		fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+		break;
+
+	case CSI2_PAD_SOURCE:
+		/* Source format same as sink format, except for DPCM
+		 * compression.
+		 */
+		pixelcode = fmt->code;
+		format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+
+		/*
+		 * Only Allow DPCM decompression, and check that the
+		 * pattern is preserved
+		 */
+		info = omap3isp_video_format_info(fmt->code);
+		if (info->uncompressed == pixelcode)
+			fmt->code = pixelcode;
+		break;
+	}
+
+	/* RGB, non-interlaced */
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * csi2_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csi2_enum_mbus_code(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+	const struct isp_format_info *info;
+
+	if (code->pad == CSI2_PAD_SINK) {
+		if (code->index >= ARRAY_SIZE(csi2_input_fmts))
+			return -EINVAL;
+
+		code->code = csi2_input_fmts[code->index];
+	} else {
+		format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK,
+					   V4L2_SUBDEV_FORMAT_TRY);
+		switch (code->index) {
+		case 0:
+			/* Passthrough sink pad code */
+			code->code = format->code;
+			break;
+		case 1:
+			/* Uncompressed code */
+			info = omap3isp_video_format_info(format->code);
+			if (info->uncompressed == format->code)
+				return -EINVAL;
+
+			code->code = info->uncompressed;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int csi2_enum_frame_size(struct v4l2_subdev *sd,
+				struct v4l2_subdev_fh *fh,
+				struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * csi2_get_format - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on sucess
+ */
+static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * csi2_set_format - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			   struct v4l2_subdev_format *fmt)
+{
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == CSI2_PAD_SINK) {
+		format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE,
+					   fmt->which);
+		*format = fmt->format;
+		csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * csi2_init_formats - Initialize formats on all pads
+ * @sd: ISP CSI2 V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = CSI2_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	csi2_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/*
+ * csi2_set_stream - Enable/Disable streaming on the CSI2 module
+ * @sd: ISP CSI2 V4L2 subdevice
+ * @enable: ISP pipeline stream state
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int csi2_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = csi2->isp;
+	struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
+	struct isp_video *video_out = &csi2->video_out;
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (omap3isp_csiphy_acquire(csi2->phy) < 0)
+			return -ENODEV;
+		csi2->use_fs_irq = pipe->do_propagation;
+		if (csi2->output & CSI2_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
+		csi2_configure(csi2);
+		csi2_print_status(csi2);
+
+		/*
+		 * When outputting to memory with no buffer available, let the
+		 * buffer queue handler start the hardware. A DMA queue flag
+		 * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is
+		 * a buffer available.
+		 */
+		if (csi2->output & CSI2_OUTPUT_MEMORY &&
+		    !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED))
+			break;
+		/* Enable context 0 and IRQs */
+		atomic_set(&csi2->stopping, 0);
+		csi2_ctx_enable(isp, csi2, 0, 1);
+		csi2_if_enable(isp, csi2, 1);
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (csi2->state == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+		if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait,
+					      &csi2->stopping))
+			dev_dbg(isp->dev, "%s: module stop timeout.\n",
+				sd->name);
+		csi2_ctx_enable(isp, csi2, 0, 0);
+		csi2_if_enable(isp, csi2, 0);
+		csi2_irq_ctx_set(isp, csi2, 0);
+		omap3isp_csiphy_release(csi2->phy);
+		isp_video_dmaqueue_flags_clr(video_out);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE);
+		break;
+	}
+
+	csi2->state = enable;
+	return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops csi2_core_ops = {
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+};
+
+/* subdev file operations */
+static const struct v4l2_subdev_file_ops csi2_file_ops = {
+	.open = csi2_init_formats,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops csi2_video_ops = {
+	.s_stream = csi2_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops csi2_pad_ops = {
+	.enum_mbus_code = csi2_enum_mbus_code,
+	.enum_frame_size = csi2_enum_frame_size,
+	.get_fmt = csi2_get_format,
+	.set_fmt = csi2_set_format,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops csi2_ops = {
+	.core = &csi2_core_ops,
+	.file = &csi2_file_ops,
+	.video = &csi2_video_ops,
+	.pad = &csi2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * csi2_link_setup - Setup CSI2 connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL or zero on success
+ */
+static int csi2_link_setup(struct media_entity *entity,
+			   const struct media_pad *local,
+			   const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd);
+	struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl;
+
+	/*
+	 * The ISP core doesn't support pipelines with multiple video outputs.
+	 * Revisit this when it will be implemented, and return -EBUSY for now.
+	 */
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (csi2->output & ~CSI2_OUTPUT_MEMORY)
+				return -EBUSY;
+			csi2->output |= CSI2_OUTPUT_MEMORY;
+		} else {
+			csi2->output &= ~CSI2_OUTPUT_MEMORY;
+		}
+		break;
+
+	case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (csi2->output & ~CSI2_OUTPUT_CCDC)
+				return -EBUSY;
+			csi2->output |= CSI2_OUTPUT_CCDC;
+		} else {
+			csi2->output &= ~CSI2_OUTPUT_CCDC;
+		}
+		break;
+
+	default:
+		/* Link from camera to CSI2 is fixed... */
+		return -EINVAL;
+	}
+
+	ctrl->vp_only_enable =
+		(csi2->output & CSI2_OUTPUT_MEMORY) ? false : true;
+	ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC);
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations csi2_media_ops = {
+	.link_setup = csi2_link_setup,
+};
+
+/*
+ * csi2_init_entities - Initialize subdev and media entity.
+ * @csi2: Pointer to csi2 structure.
+ * return -ENOMEM or zero on success
+ */
+static int csi2_init_entities(struct isp_csi2_device *csi2)
+{
+	struct v4l2_subdev *sd = &csi2->subdev;
+	struct media_pad *pads = csi2->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	v4l2_subdev_init(sd, &csi2_ops);
+	strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name));
+
+	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, csi2);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	v4l2_ctrl_handler_init(&csi2->ctrls, 1);
+	sd->ctrl_handler = &csi2->ctrls;
+
+	pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_OUTPUT;
+	pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_INPUT;
+
+	me->ops = &csi2_media_ops;
+	ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	csi2_init_formats(sd, NULL);
+
+	/* Video device node */
+	csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	csi2->video_out.ops = &csi2_ispvideo_ops;
+	csi2->video_out.bpl_alignment = 32;
+	csi2->video_out.bpl_zero_padding = 1;
+	csi2->video_out.bpl_max = 0x1ffe0;
+	csi2->video_out.isp = csi2->isp;
+	csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
+
+	ret = omap3isp_video_init(&csi2->video_out, "CSI2a");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the CSI2 subdev to the video node. */
+	ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE,
+				       &csi2->video_out.video.entity, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
+{
+	media_entity_cleanup(&csi2->subdev.entity);
+
+	v4l2_device_unregister_subdev(&csi2->subdev);
+	v4l2_ctrl_handler_free(&csi2->ctrls);
+	omap3isp_video_unregister(&csi2->video_out);
+}
+
+int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
+				    struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&csi2->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_csi2_unregister_entities(csi2);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CSI2 initialisation and cleanup
+ */
+
+/*
+ * omap3isp_csi2_cleanup - Routine for module driver cleanup
+ */
+void omap3isp_csi2_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * omap3isp_csi2_init - Routine for module driver init
+ */
+int omap3isp_csi2_init(struct isp_device *isp)
+{
+	struct isp_csi2_device *csi2a = &isp->isp_csi2a;
+	struct isp_csi2_device *csi2c = &isp->isp_csi2c;
+	int ret;
+
+	csi2a->isp = isp;
+	csi2a->available = 1;
+	csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1;
+	csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2;
+	csi2a->phy = &isp->isp_csiphy2;
+	csi2a->state = ISP_PIPELINE_STREAM_STOPPED;
+	init_waitqueue_head(&csi2a->wait);
+
+	ret = csi2_init_entities(csi2a);
+	if (ret < 0)
+		goto fail;
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		csi2c->isp = isp;
+		csi2c->available = 1;
+		csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1;
+		csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2;
+		csi2c->phy = &isp->isp_csiphy1;
+		csi2c->state = ISP_PIPELINE_STREAM_STOPPED;
+		init_waitqueue_head(&csi2c->wait);
+	}
+
+	return 0;
+fail:
+	omap3isp_csi2_cleanup(isp);
+	return ret;
+}
diff --git a/drivers/media/video/isp/ispcsi2.h b/drivers/media/video/isp/ispcsi2.h
new file mode 100644
index 0000000..b367326
--- /dev/null
+++ b/drivers/media/video/isp/ispcsi2.h
@@ -0,0 +1,169 @@
+/*
+ * ispcsi2.h
+ *
+ * TI OMAP3 ISP - CSI2 module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_CSI2_H
+#define OMAP3_ISP_CSI2_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+
+struct isp_csiphy;
+
+/* This is not an exhaustive list */
+enum isp_csi2_pix_formats {
+	CSI2_PIX_FMT_OTHERS = 0,
+	CSI2_PIX_FMT_YUV422_8BIT = 0x1e,
+	CSI2_PIX_FMT_YUV422_8BIT_VP = 0x9e,
+	CSI2_PIX_FMT_RAW10_EXP16 = 0xab,
+	CSI2_PIX_FMT_RAW10_EXP16_VP = 0x12f,
+	CSI2_PIX_FMT_RAW8 = 0x2a,
+	CSI2_PIX_FMT_RAW8_DPCM10_EXP16 = 0x2aa,
+	CSI2_PIX_FMT_RAW8_DPCM10_VP = 0x32a,
+	CSI2_PIX_FMT_RAW8_VP = 0x12a,
+	CSI2_USERDEF_8BIT_DATA1_DPCM10_VP = 0x340,
+	CSI2_USERDEF_8BIT_DATA1_DPCM10 = 0x2c0,
+	CSI2_USERDEF_8BIT_DATA1 = 0x40,
+};
+
+enum isp_csi2_irqevents {
+	OCP_ERR_IRQ = 0x4000,
+	SHORT_PACKET_IRQ = 0x2000,
+	ECC_CORRECTION_IRQ = 0x1000,
+	ECC_NO_CORRECTION_IRQ = 0x800,
+	COMPLEXIO2_ERR_IRQ = 0x400,
+	COMPLEXIO1_ERR_IRQ = 0x200,
+	FIFO_OVF_IRQ = 0x100,
+	CONTEXT7 = 0x80,
+	CONTEXT6 = 0x40,
+	CONTEXT5 = 0x20,
+	CONTEXT4 = 0x10,
+	CONTEXT3 = 0x8,
+	CONTEXT2 = 0x4,
+	CONTEXT1 = 0x2,
+	CONTEXT0 = 0x1,
+};
+
+enum isp_csi2_ctx_irqevents {
+	CTX_ECC_CORRECTION = 0x100,
+	CTX_LINE_NUMBER = 0x80,
+	CTX_FRAME_NUMBER = 0x40,
+	CTX_CS = 0x20,
+	CTX_LE = 0x8,
+	CTX_LS = 0x4,
+	CTX_FE = 0x2,
+	CTX_FS = 0x1,
+};
+
+enum isp_csi2_frame_mode {
+	ISP_CSI2_FRAME_IMMEDIATE,
+	ISP_CSI2_FRAME_AFTERFEC,
+};
+
+#define ISP_CSI2_MAX_CTX_NUM	7
+
+struct isp_csi2_ctx_cfg {
+	u8 ctxnum;		/* context number 0 - 7 */
+	u8 dpcm_decompress;
+
+	/* Fields in CSI2_CTx_CTRL2 - locked by CSI2_CTx_CTRL1.CTX_EN */
+	u8 virtual_id;
+	u16 format_id;		/* as in CSI2_CTx_CTRL2[9:0] */
+	u8 dpcm_predictor;	/* 1: simple, 0: advanced */
+
+	/* Fields in CSI2_CTx_CTRL1/3 - Shadowed */
+	u16 alpha;
+	u16 data_offset;
+	u32 ping_addr;
+	u32 pong_addr;
+	u8 eof_enabled;
+	u8 eol_enabled;
+	u8 checksum_enabled;
+	u8 enabled;
+};
+
+struct isp_csi2_timing_cfg {
+	u8 ionum;			/* IO1 or IO2 as in CSI2_TIMING */
+	unsigned force_rx_mode:1;
+	unsigned stop_state_16x:1;
+	unsigned stop_state_4x:1;
+	u16 stop_state_counter;
+};
+
+struct isp_csi2_ctrl_cfg {
+	bool vp_clk_enable;
+	bool vp_only_enable;
+	u8 vp_out_ctrl;
+	enum isp_csi2_frame_mode frame_mode;
+	bool ecc_enable;
+	bool if_enable;
+};
+
+#define CSI2_PAD_SINK		0
+#define CSI2_PAD_SOURCE		1
+#define CSI2_PADS_NUM		2
+
+#define CSI2_OUTPUT_CCDC	(1 << 0)
+#define CSI2_OUTPUT_MEMORY	(1 << 1)
+
+struct isp_csi2_device {
+	struct v4l2_subdev subdev;
+	struct media_pad pads[CSI2_PADS_NUM];
+	struct v4l2_mbus_framefmt formats[CSI2_PADS_NUM];
+
+	struct v4l2_ctrl_handler ctrls;
+
+	struct isp_video video_out;
+	struct isp_device *isp;
+
+	u8 available;		/* Is the IP present on the silicon? */
+
+	/* mem resources - enums as defined in enum isp_mem_resources */
+	u8 regs1;
+	u8 regs2;
+
+	u32 output; /* output to CCDC, memory or both? */
+	bool dpcm_decompress;
+	unsigned int frame_skip;
+	bool use_fs_irq;
+
+	struct isp_csiphy *phy;
+	struct isp_csi2_ctx_cfg contexts[ISP_CSI2_MAX_CTX_NUM + 1];
+	struct isp_csi2_timing_cfg timing[2];
+	struct isp_csi2_ctrl_cfg ctrl;
+	enum isp_pipeline_stream_state state;
+	wait_queue_head_t wait;
+	atomic_t stopping;
+};
+
+int omap3isp_csi2_isr(struct isp_csi2_device *csi2);
+int omap3isp_csi2_reset(struct isp_csi2_device *csi2);
+int omap3isp_csi2_init(struct isp_device *isp);
+void omap3isp_csi2_cleanup(struct isp_device *isp);
+void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2);
+int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
+				    struct v4l2_device *vdev);
+#endif	/* OMAP3_ISP_CSI2_H */
diff --git a/drivers/media/video/isp/ispcsiphy.c b/drivers/media/video/isp/ispcsiphy.c
new file mode 100644
index 0000000..59cd477
--- /dev/null
+++ b/drivers/media/video/isp/ispcsiphy.c
@@ -0,0 +1,247 @@
+/*
+ * ispcsiphy.c
+ *
+ * TI OMAP3 ISP - CSI PHY module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispcsiphy.h"
+
+/*
+ * csiphy_lanes_config - Configuration of CSIPHY lanes.
+ *
+ * Updates HW configuration.
+ * Called with phy->mutex taken.
+ */
+static void csiphy_lanes_config(struct isp_csiphy *phy)
+{
+	unsigned int i;
+	u32 reg;
+
+	reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
+
+	for (i = 0; i < phy->num_data_lanes; i++) {
+		reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
+			 ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
+		reg |= (phy->lanes.data[i].pol <<
+			ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
+		reg |= (phy->lanes.data[i].pos <<
+			ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
+	}
+
+	reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
+		 ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
+	reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
+	reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
+
+	isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
+}
+
+/*
+ * csiphy_power_autoswitch_enable
+ * @enable: Sets or clears the autoswitch function enable flag.
+ */
+static void csiphy_power_autoswitch_enable(struct isp_csiphy *phy, bool enable)
+{
+	isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG,
+			ISPCSI2_PHY_CFG_PWR_AUTO,
+			enable ? ISPCSI2_PHY_CFG_PWR_AUTO : 0);
+}
+
+/*
+ * csiphy_set_power
+ * @power: Power state to be set.
+ *
+ * Returns 0 if successful, or -EBUSY if the retry count is exceeded.
+ */
+static int csiphy_set_power(struct isp_csiphy *phy, u32 power)
+{
+	u32 reg;
+	u8 retry_count;
+
+	isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG,
+			ISPCSI2_PHY_CFG_PWR_CMD_MASK, power);
+
+	retry_count = 0;
+	do {
+		udelay(50);
+		reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG) &
+				    ISPCSI2_PHY_CFG_PWR_STATUS_MASK;
+
+		if (reg != power >> 2)
+			retry_count++;
+
+	} while ((reg != power >> 2) && (retry_count < 100));
+
+	if (retry_count == 100) {
+		printk(KERN_ERR "CSI2 CIO set power failed!\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/*
+ * csiphy_dphy_config - Configure CSI2 D-PHY parameters.
+ *
+ * Called with phy->mutex taken.
+ */
+static void csiphy_dphy_config(struct isp_csiphy *phy)
+{
+	u32 reg;
+
+	/* Set up ISPCSIPHY_REG0 */
+	reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0);
+
+	reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
+		 ISPCSIPHY_REG0_THS_SETTLE_MASK);
+	reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT;
+	reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
+
+	isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
+
+	/* Set up ISPCSIPHY_REG1 */
+	reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1);
+
+	reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
+		 ISPCSIPHY_REG1_TCLK_MISS_MASK |
+		 ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
+	reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
+	reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
+	reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
+
+	isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
+}
+
+static int csiphy_config(struct isp_csiphy *phy,
+			 struct isp_csiphy_dphy_cfg *dphy,
+			 struct isp_csiphy_lanes_cfg *lanes)
+{
+	unsigned int used_lanes = 0;
+	unsigned int i;
+
+	/* Clock and data lanes verification */
+	for (i = 0; i < phy->num_data_lanes; i++) {
+		if (lanes->data[i].pol > 1 || lanes->data[i].pos > 3)
+			return -EINVAL;
+
+		if (used_lanes & (1 << lanes->data[i].pos))
+			return -EINVAL;
+
+		used_lanes |= 1 << lanes->data[i].pos;
+	}
+
+	if (lanes->clk.pol > 1 || lanes->clk.pos > 3)
+		return -EINVAL;
+
+	if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos))
+		return -EINVAL;
+
+	mutex_lock(&phy->mutex);
+	phy->dphy = *dphy;
+	phy->lanes = *lanes;
+	mutex_unlock(&phy->mutex);
+
+	return 0;
+}
+
+int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
+{
+	int rval;
+
+	if (phy->vdd == NULL) {
+		dev_err(phy->isp->dev, "Power regulator for CSI PHY not "
+			"available\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&phy->mutex);
+
+	rval = regulator_enable(phy->vdd);
+	if (rval < 0)
+		goto done;
+
+	omap3isp_csi2_reset(phy->csi2);
+
+	csiphy_dphy_config(phy);
+	csiphy_lanes_config(phy);
+
+	rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
+	if (rval) {
+		regulator_disable(phy->vdd);
+		goto done;
+	}
+
+	csiphy_power_autoswitch_enable(phy, true);
+	phy->phy_in_use = 1;
+
+done:
+	mutex_unlock(&phy->mutex);
+	return rval;
+}
+
+void omap3isp_csiphy_release(struct isp_csiphy *phy)
+{
+	mutex_lock(&phy->mutex);
+	if (phy->phy_in_use) {
+		csiphy_power_autoswitch_enable(phy, false);
+		csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_OFF);
+		regulator_disable(phy->vdd);
+		phy->phy_in_use = 0;
+	}
+	mutex_unlock(&phy->mutex);
+}
+
+/*
+ * omap3isp_csiphy_init - Initialize the CSI PHY frontends
+ */
+int omap3isp_csiphy_init(struct isp_device *isp)
+{
+	struct isp_csiphy *phy1 = &isp->isp_csiphy1;
+	struct isp_csiphy *phy2 = &isp->isp_csiphy2;
+
+	isp->platform_cb.csiphy_config = csiphy_config;
+
+	phy2->isp = isp;
+	phy2->csi2 = &isp->isp_csi2a;
+	phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES;
+	phy2->cfg_regs = OMAP3_ISP_IOMEM_CSI2A_REGS1;
+	phy2->phy_regs = OMAP3_ISP_IOMEM_CSIPHY2;
+	mutex_init(&phy2->mutex);
+
+	if (isp->revision == ISP_REVISION_15_0) {
+		phy1->isp = isp;
+		phy1->csi2 = &isp->isp_csi2c;
+		phy1->num_data_lanes = ISP_CSIPHY1_NUM_DATA_LANES;
+		phy1->cfg_regs = OMAP3_ISP_IOMEM_CSI2C_REGS1;
+		phy1->phy_regs = OMAP3_ISP_IOMEM_CSIPHY1;
+		mutex_init(&phy1->mutex);
+	}
+
+	return 0;
+}
diff --git a/drivers/media/video/isp/ispcsiphy.h b/drivers/media/video/isp/ispcsiphy.h
new file mode 100644
index 0000000..39a7e6b
--- /dev/null
+++ b/drivers/media/video/isp/ispcsiphy.h
@@ -0,0 +1,74 @@
+/*
+ * ispcsiphy.h
+ *
+ * TI OMAP3 ISP - CSI PHY module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_CSI_PHY_H
+#define OMAP3_ISP_CSI_PHY_H
+
+struct isp_csi2_device;
+struct regulator;
+
+struct csiphy_lane {
+	u8 pos;
+	u8 pol;
+};
+
+#define ISP_CSIPHY2_NUM_DATA_LANES	2
+#define ISP_CSIPHY1_NUM_DATA_LANES	1
+
+struct isp_csiphy_lanes_cfg {
+	struct csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES];
+	struct csiphy_lane clk;
+};
+
+struct isp_csiphy_dphy_cfg {
+	u8 ths_term;
+	u8 ths_settle;
+	u8 tclk_term;
+	unsigned tclk_miss:1;
+	u8 tclk_settle;
+};
+
+struct isp_csiphy {
+	struct isp_device *isp;
+	struct mutex mutex;	/* serialize csiphy configuration */
+	u8 phy_in_use;
+	struct isp_csi2_device *csi2;
+	struct regulator *vdd;
+
+	/* mem resources - enums as defined in enum isp_mem_resources */
+	unsigned int cfg_regs;
+	unsigned int phy_regs;
+
+	u8 num_data_lanes;	/* number of CSI2 Data Lanes supported */
+	struct isp_csiphy_lanes_cfg lanes;
+	struct isp_csiphy_dphy_cfg dphy;
+};
+
+int omap3isp_csiphy_acquire(struct isp_csiphy *phy);
+void omap3isp_csiphy_release(struct isp_csiphy *phy);
+int omap3isp_csiphy_init(struct isp_device *isp);
+
+#endif	/* OMAP3_ISP_CSI_PHY_H */
diff --git a/drivers/media/video/isp/isph3a.h b/drivers/media/video/isp/isph3a.h
new file mode 100644
index 0000000..6d43529
--- /dev/null
+++ b/drivers/media/video/isp/isph3a.h
@@ -0,0 +1,117 @@
+/*
+ * isph3a.h
+ *
+ * TI OMAP3 ISP - H3A AF module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_H3A_H
+#define OMAP3_ISP_H3A_H
+
+#include <linux/omap3isp.h>
+
+/*
+ * ----------
+ * -H3A AEWB-
+ * ----------
+ */
+
+#define AEWB_PACKET_SIZE	16
+#define AEWB_SATURATION_LIMIT	0x3ff
+
+/* Flags for changed registers */
+#define PCR_CHNG		(1 << 0)
+#define AEWWIN1_CHNG		(1 << 1)
+#define AEWINSTART_CHNG		(1 << 2)
+#define AEWINBLK_CHNG		(1 << 3)
+#define AEWSUBWIN_CHNG		(1 << 4)
+#define PRV_WBDGAIN_CHNG	(1 << 5)
+#define PRV_WBGAIN_CHNG		(1 << 6)
+
+/* ISPH3A REGISTERS bits */
+#define ISPH3A_PCR_AF_EN	(1 << 0)
+#define ISPH3A_PCR_AF_ALAW_EN	(1 << 1)
+#define ISPH3A_PCR_AF_MED_EN	(1 << 2)
+#define ISPH3A_PCR_AF_BUSY	(1 << 15)
+#define ISPH3A_PCR_AEW_EN	(1 << 16)
+#define ISPH3A_PCR_AEW_ALAW_EN	(1 << 17)
+#define ISPH3A_PCR_AEW_BUSY	(1 << 18)
+#define ISPH3A_PCR_AEW_MASK	(ISPH3A_PCR_AEW_ALAW_EN | \
+				 ISPH3A_PCR_AEW_AVE2LMT_MASK)
+
+/*
+ * --------
+ * -H3A AF-
+ * --------
+ */
+
+/* Peripheral Revision */
+#define AFPID				0x0
+
+#define AFCOEF_OFFSET			0x00000004	/* COEF base address */
+
+/* PCR fields */
+#define AF_BUSYAF			(1 << 15)
+#define AF_FVMODE			(1 << 14)
+#define AF_RGBPOS			(0x7 << 11)
+#define AF_MED_TH			(0xFF << 3)
+#define AF_MED_EN			(1 << 2)
+#define AF_ALAW_EN			(1 << 1)
+#define AF_EN				(1 << 0)
+#define AF_PCR_MASK			(AF_FVMODE | AF_RGBPOS | AF_MED_TH | \
+					 AF_MED_EN | AF_ALAW_EN)
+
+/* AFPAX1 fields */
+#define AF_PAXW				(0x7F << 16)
+#define AF_PAXH				0x7F
+
+/* AFPAX2 fields */
+#define AF_AFINCV			(0xF << 13)
+#define AF_PAXVC			(0x7F << 6)
+#define AF_PAXHC			0x3F
+
+/* AFPAXSTART fields */
+#define AF_PAXSH			(0xFFF<<16)
+#define AF_PAXSV			0xFFF
+
+/* COEFFICIENT MASK */
+#define AF_COEF_MASK0			0xFFF
+#define AF_COEF_MASK1			(0xFFF<<16)
+
+/* BIT SHIFTS */
+#define AF_RGBPOS_SHIFT			11
+#define AF_MED_TH_SHIFT			3
+#define AF_PAXW_SHIFT			16
+#define AF_LINE_INCR_SHIFT		13
+#define AF_VT_COUNT_SHIFT		6
+#define AF_HZ_START_SHIFT		16
+#define AF_COEF_SHIFT			16
+
+/* Init and cleanup functions */
+int omap3isp_h3a_aewb_init(struct isp_device *isp);
+int omap3isp_h3a_af_init(struct isp_device *isp);
+
+void omap3isp_h3a_aewb_cleanup(struct isp_device *isp);
+void omap3isp_h3a_af_cleanup(struct isp_device *isp);
+
+#endif /* OMAP3_ISP_H3A_H */
diff --git a/drivers/media/video/isp/isph3a_aewb.c b/drivers/media/video/isp/isph3a_aewb.c
new file mode 100644
index 0000000..b4e97f2
--- /dev/null
+++ b/drivers/media/video/isp/isph3a_aewb.c
@@ -0,0 +1,374 @@
+/*
+ * isph3a.c
+ *
+ * TI OMAP3 ISP - H3A module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "isph3a.h"
+#include "ispstat.h"
+
+/*
+ * h3a_aewb_update_regs - Helper function to update h3a registers.
+ */
+static void h3a_aewb_setup_regs(struct ispstat *aewb, void *priv)
+{
+	struct omap3isp_h3a_aewb_config *conf = priv;
+	u32 pcr;
+	u32 win1;
+	u32 start;
+	u32 blk;
+	u32 subwin;
+
+	if (aewb->state == ISPSTAT_DISABLED)
+		return;
+
+	isp_reg_writel(aewb->isp, aewb->active_buf->iommu_addr,
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWBUFST);
+
+	if (!aewb->update)
+		return;
+
+	/* Converting config metadata into reg values */
+	pcr = conf->saturation_limit << ISPH3A_PCR_AEW_AVE2LMT_SHIFT;
+	pcr |= !!conf->alaw_enable << ISPH3A_PCR_AEW_ALAW_EN_SHIFT;
+
+	win1 = ((conf->win_height >> 1) - 1) << ISPH3A_AEWWIN1_WINH_SHIFT;
+	win1 |= ((conf->win_width >> 1) - 1) << ISPH3A_AEWWIN1_WINW_SHIFT;
+	win1 |= (conf->ver_win_count - 1) << ISPH3A_AEWWIN1_WINVC_SHIFT;
+	win1 |= (conf->hor_win_count - 1) << ISPH3A_AEWWIN1_WINHC_SHIFT;
+
+	start = conf->hor_win_start << ISPH3A_AEWINSTART_WINSH_SHIFT;
+	start |= conf->ver_win_start << ISPH3A_AEWINSTART_WINSV_SHIFT;
+
+	blk = conf->blk_ver_win_start << ISPH3A_AEWINBLK_WINSV_SHIFT;
+	blk |= ((conf->blk_win_height >> 1) - 1) << ISPH3A_AEWINBLK_WINH_SHIFT;
+
+	subwin = ((conf->subsample_ver_inc >> 1) - 1) <<
+		 ISPH3A_AEWSUBWIN_AEWINCV_SHIFT;
+	subwin |= ((conf->subsample_hor_inc >> 1) - 1) <<
+		  ISPH3A_AEWSUBWIN_AEWINCH_SHIFT;
+
+	isp_reg_writel(aewb->isp, win1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWWIN1);
+	isp_reg_writel(aewb->isp, start, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AEWINSTART);
+	isp_reg_writel(aewb->isp, blk, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINBLK);
+	isp_reg_writel(aewb->isp, subwin, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AEWSUBWIN);
+	isp_reg_clr_set(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			ISPH3A_PCR_AEW_MASK, pcr);
+
+	aewb->update = 0;
+	aewb->config_counter += aewb->inc_config;
+	aewb->inc_config = 0;
+	aewb->buf_size = conf->buf_size;
+}
+
+static void h3a_aewb_enable(struct ispstat *aewb, int enable)
+{
+	if (enable) {
+		isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AEW_EN);
+		/* This bit is already set if AF is enabled */
+		if (aewb->isp->isp_af.state != ISPSTAT_ENABLED)
+			isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+				    ISPCTRL_H3A_CLK_EN);
+	} else {
+		isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AEW_EN);
+		/* This bit can't be cleared if AF is enabled */
+		if (aewb->isp->isp_af.state != ISPSTAT_ENABLED)
+			isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+				    ISPCTRL_H3A_CLK_EN);
+	}
+}
+
+static int h3a_aewb_busy(struct ispstat *aewb)
+{
+	return isp_reg_readl(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR)
+						& ISPH3A_PCR_BUSYAEAWB;
+}
+
+static u32 h3a_aewb_get_buf_size(struct omap3isp_h3a_aewb_config *conf)
+{
+	/* Number of configured windows + extra row for black data */
+	u32 win_count = (conf->ver_win_count + 1) * conf->hor_win_count;
+
+	/*
+	 * Unsaturated block counts for each 8 windows.
+	 * 1 extra for the last (win_count % 8) windows if win_count is not
+	 * divisible by 8.
+	 */
+	win_count += (win_count + 7) / 8;
+
+	return win_count * AEWB_PACKET_SIZE;
+}
+
+static int h3a_aewb_validate_params(struct ispstat *aewb, void *new_conf)
+{
+	struct omap3isp_h3a_aewb_config *user_cfg = new_conf;
+	u32 buf_size;
+
+	if (unlikely(user_cfg->saturation_limit >
+		     OMAP3ISP_AEWB_MAX_SATURATION_LIM))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->win_height < OMAP3ISP_AEWB_MIN_WIN_H ||
+		     user_cfg->win_height > OMAP3ISP_AEWB_MAX_WIN_H ||
+		     user_cfg->win_height & 0x01))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->win_width < OMAP3ISP_AEWB_MIN_WIN_W ||
+		     user_cfg->win_width > OMAP3ISP_AEWB_MAX_WIN_W ||
+		     user_cfg->win_width & 0x01))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->ver_win_count < OMAP3ISP_AEWB_MIN_WINVC ||
+		     user_cfg->ver_win_count > OMAP3ISP_AEWB_MAX_WINVC))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->hor_win_count < OMAP3ISP_AEWB_MIN_WINHC ||
+		     user_cfg->hor_win_count > OMAP3ISP_AEWB_MAX_WINHC))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->ver_win_start > OMAP3ISP_AEWB_MAX_WINSTART))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->hor_win_start > OMAP3ISP_AEWB_MAX_WINSTART))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->blk_ver_win_start > OMAP3ISP_AEWB_MAX_WINSTART))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->blk_win_height < OMAP3ISP_AEWB_MIN_WIN_H ||
+		     user_cfg->blk_win_height > OMAP3ISP_AEWB_MAX_WIN_H ||
+		     user_cfg->blk_win_height & 0x01))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->subsample_ver_inc < OMAP3ISP_AEWB_MIN_SUB_INC ||
+		     user_cfg->subsample_ver_inc > OMAP3ISP_AEWB_MAX_SUB_INC ||
+		     user_cfg->subsample_ver_inc & 0x01))
+		return -EINVAL;
+
+	if (unlikely(user_cfg->subsample_hor_inc < OMAP3ISP_AEWB_MIN_SUB_INC ||
+		     user_cfg->subsample_hor_inc > OMAP3ISP_AEWB_MAX_SUB_INC ||
+		     user_cfg->subsample_hor_inc & 0x01))
+		return -EINVAL;
+
+	buf_size = h3a_aewb_get_buf_size(user_cfg);
+	if (buf_size > user_cfg->buf_size)
+		user_cfg->buf_size = buf_size;
+	else if (user_cfg->buf_size > OMAP3ISP_AEWB_MAX_BUF_SIZE)
+		user_cfg->buf_size = OMAP3ISP_AEWB_MAX_BUF_SIZE;
+
+	return 0;
+}
+
+/*
+ * h3a_aewb_set_params - Helper function to check & store user given params.
+ * @new_conf: Pointer to AE and AWB parameters struct.
+ *
+ * As most of them are busy-lock registers, need to wait until AEW_BUSY = 0 to
+ * program them during ISR.
+ */
+static void h3a_aewb_set_params(struct ispstat *aewb, void *new_conf)
+{
+	struct omap3isp_h3a_aewb_config *user_cfg = new_conf;
+	struct omap3isp_h3a_aewb_config *cur_cfg = aewb->priv;
+	int update = 0;
+
+	if (cur_cfg->saturation_limit != user_cfg->saturation_limit) {
+		cur_cfg->saturation_limit = user_cfg->saturation_limit;
+		update = 1;
+	}
+	if (cur_cfg->alaw_enable != user_cfg->alaw_enable) {
+		cur_cfg->alaw_enable = user_cfg->alaw_enable;
+		update = 1;
+	}
+	if (cur_cfg->win_height != user_cfg->win_height) {
+		cur_cfg->win_height = user_cfg->win_height;
+		update = 1;
+	}
+	if (cur_cfg->win_width != user_cfg->win_width) {
+		cur_cfg->win_width = user_cfg->win_width;
+		update = 1;
+	}
+	if (cur_cfg->ver_win_count != user_cfg->ver_win_count) {
+		cur_cfg->ver_win_count = user_cfg->ver_win_count;
+		update = 1;
+	}
+	if (cur_cfg->hor_win_count != user_cfg->hor_win_count) {
+		cur_cfg->hor_win_count = user_cfg->hor_win_count;
+		update = 1;
+	}
+	if (cur_cfg->ver_win_start != user_cfg->ver_win_start) {
+		cur_cfg->ver_win_start = user_cfg->ver_win_start;
+		update = 1;
+	}
+	if (cur_cfg->hor_win_start != user_cfg->hor_win_start) {
+		cur_cfg->hor_win_start = user_cfg->hor_win_start;
+		update = 1;
+	}
+	if (cur_cfg->blk_ver_win_start != user_cfg->blk_ver_win_start) {
+		cur_cfg->blk_ver_win_start = user_cfg->blk_ver_win_start;
+		update = 1;
+	}
+	if (cur_cfg->blk_win_height != user_cfg->blk_win_height) {
+		cur_cfg->blk_win_height = user_cfg->blk_win_height;
+		update = 1;
+	}
+	if (cur_cfg->subsample_ver_inc != user_cfg->subsample_ver_inc) {
+		cur_cfg->subsample_ver_inc = user_cfg->subsample_ver_inc;
+		update = 1;
+	}
+	if (cur_cfg->subsample_hor_inc != user_cfg->subsample_hor_inc) {
+		cur_cfg->subsample_hor_inc = user_cfg->subsample_hor_inc;
+		update = 1;
+	}
+
+	if (update || !aewb->configured) {
+		aewb->inc_config++;
+		aewb->update = 1;
+		cur_cfg->buf_size = h3a_aewb_get_buf_size(cur_cfg);
+	}
+}
+
+static long h3a_aewb_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_AEWB_CFG:
+		return omap3isp_stat_config(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_REQ:
+		return omap3isp_stat_request_statistics(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_EN: {
+		unsigned long *en = arg;
+		return omap3isp_stat_enable(stat, !!*en);
+	}
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static const struct ispstat_ops h3a_aewb_ops = {
+	.validate_params	= h3a_aewb_validate_params,
+	.set_params		= h3a_aewb_set_params,
+	.setup_regs		= h3a_aewb_setup_regs,
+	.enable			= h3a_aewb_enable,
+	.busy			= h3a_aewb_busy,
+};
+
+static const struct v4l2_subdev_core_ops h3a_aewb_subdev_core_ops = {
+	.ioctl = h3a_aewb_ioctl,
+	.subscribe_event = omap3isp_stat_subscribe_event,
+	.unsubscribe_event = omap3isp_stat_unsubscribe_event,
+};
+
+static const struct v4l2_subdev_video_ops h3a_aewb_subdev_video_ops = {
+	.s_stream = omap3isp_stat_s_stream,
+};
+
+static const struct v4l2_subdev_ops h3a_aewb_subdev_ops = {
+	.core = &h3a_aewb_subdev_core_ops,
+	.video = &h3a_aewb_subdev_video_ops,
+};
+
+/*
+ * omap3isp_h3a_aewb_init - Module Initialisation.
+ */
+int omap3isp_h3a_aewb_init(struct isp_device *isp)
+{
+	struct ispstat *aewb = &isp->isp_aewb;
+	struct omap3isp_h3a_aewb_config *aewb_cfg;
+	struct omap3isp_h3a_aewb_config *aewb_recover_cfg;
+	int ret;
+
+	aewb_cfg = kzalloc(sizeof(*aewb_cfg), GFP_KERNEL);
+	if (!aewb_cfg)
+		return -ENOMEM;
+
+	memset(aewb, 0, sizeof(*aewb));
+	aewb->ops = &h3a_aewb_ops;
+	aewb->priv = aewb_cfg;
+	aewb->dma_ch = -1;
+	aewb->event_type = V4L2_EVENT_OMAP3ISP_AEWB;
+	aewb->isp = isp;
+
+	/* Set recover state configuration */
+	aewb_recover_cfg = kzalloc(sizeof(*aewb_recover_cfg), GFP_KERNEL);
+	if (!aewb_recover_cfg) {
+		dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for "
+					"recover configuration.\n");
+		ret = -ENOMEM;
+		goto err_recover_alloc;
+	}
+
+	aewb_recover_cfg->saturation_limit = OMAP3ISP_AEWB_MAX_SATURATION_LIM;
+	aewb_recover_cfg->win_height = OMAP3ISP_AEWB_MIN_WIN_H;
+	aewb_recover_cfg->win_width = OMAP3ISP_AEWB_MIN_WIN_W;
+	aewb_recover_cfg->ver_win_count = OMAP3ISP_AEWB_MIN_WINVC;
+	aewb_recover_cfg->hor_win_count = OMAP3ISP_AEWB_MIN_WINHC;
+	aewb_recover_cfg->blk_ver_win_start = aewb_recover_cfg->ver_win_start +
+		aewb_recover_cfg->win_height * aewb_recover_cfg->ver_win_count;
+	aewb_recover_cfg->blk_win_height = OMAP3ISP_AEWB_MIN_WIN_H;
+	aewb_recover_cfg->subsample_ver_inc = OMAP3ISP_AEWB_MIN_SUB_INC;
+	aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC;
+
+	if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) {
+		dev_err(aewb->isp->dev, "AEWB: recover configuration is "
+					"invalid.\n");
+		ret = -EINVAL;
+		goto err_conf;
+	}
+
+	aewb_recover_cfg->buf_size = h3a_aewb_get_buf_size(aewb_recover_cfg);
+	aewb->recover_priv = aewb_recover_cfg;
+
+	ret = omap3isp_stat_init(aewb, "AEWB", &h3a_aewb_subdev_ops);
+	if (ret)
+		goto err_conf;
+
+	return 0;
+
+err_conf:
+	kfree(aewb_recover_cfg);
+err_recover_alloc:
+	kfree(aewb_cfg);
+
+	return ret;
+}
+
+/*
+ * omap3isp_h3a_aewb_cleanup - Module exit.
+ */
+void omap3isp_h3a_aewb_cleanup(struct isp_device *isp)
+{
+	kfree(isp->isp_aewb.priv);
+	kfree(isp->isp_aewb.recover_priv);
+	omap3isp_stat_free(&isp->isp_aewb);
+}
diff --git a/drivers/media/video/isp/isph3a_af.c b/drivers/media/video/isp/isph3a_af.c
new file mode 100644
index 0000000..c32a18e
--- /dev/null
+++ b/drivers/media/video/isp/isph3a_af.c
@@ -0,0 +1,429 @@
+/*
+ * isph3a_af.c
+ *
+ * TI OMAP3 ISP - H3A AF module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+/* Linux specific include files */
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include "isp.h"
+#include "isph3a.h"
+#include "ispstat.h"
+
+#define IS_OUT_OF_BOUNDS(value, min, max)		\
+	(((value) < (min)) || ((value) > (max)))
+
+static void h3a_af_setup_regs(struct ispstat *af, void *priv)
+{
+	struct omap3isp_h3a_af_config *conf = priv;
+	u32 pcr;
+	u32 pax1;
+	u32 pax2;
+	u32 paxstart;
+	u32 coef;
+	u32 base_coef_set0;
+	u32 base_coef_set1;
+	int index;
+
+	if (af->state == ISPSTAT_DISABLED)
+		return;
+
+	isp_reg_writel(af->isp, af->active_buf->iommu_addr, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AFBUFST);
+
+	if (!af->update)
+		return;
+
+	/* Configure Hardware Registers */
+	pax1 = ((conf->paxel.width >> 1) - 1) << AF_PAXW_SHIFT;
+	/* Set height in AFPAX1 */
+	pax1 |= (conf->paxel.height >> 1) - 1;
+	isp_reg_writel(af->isp, pax1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX1);
+
+	/* Configure AFPAX2 Register */
+	/* Set Line Increment in AFPAX2 Register */
+	pax2 = ((conf->paxel.line_inc >> 1) - 1) << AF_LINE_INCR_SHIFT;
+	/* Set Vertical Count */
+	pax2 |= (conf->paxel.v_cnt - 1) << AF_VT_COUNT_SHIFT;
+	/* Set Horizontal Count */
+	pax2 |= (conf->paxel.h_cnt - 1);
+	isp_reg_writel(af->isp, pax2, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX2);
+
+	/* Configure PAXSTART Register */
+	/*Configure Horizontal Start */
+	paxstart = conf->paxel.h_start << AF_HZ_START_SHIFT;
+	/* Configure Vertical Start */
+	paxstart |= conf->paxel.v_start;
+	isp_reg_writel(af->isp, paxstart, OMAP3_ISP_IOMEM_H3A,
+		       ISPH3A_AFPAXSTART);
+
+	/*SetIIRSH Register */
+	isp_reg_writel(af->isp, conf->iir.h_start,
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFIIRSH);
+
+	base_coef_set0 = ISPH3A_AFCOEF010;
+	base_coef_set1 = ISPH3A_AFCOEF110;
+	for (index = 0; index <= 8; index += 2) {
+		/*Set IIR Filter0 Coefficients */
+		coef = 0;
+		coef |= conf->iir.coeff_set0[index];
+		coef |= conf->iir.coeff_set0[index + 1] <<
+			AF_COEF_SHIFT;
+		isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A,
+			       base_coef_set0);
+		base_coef_set0 += AFCOEF_OFFSET;
+
+		/*Set IIR Filter1 Coefficients */
+		coef = 0;
+		coef |= conf->iir.coeff_set1[index];
+		coef |= conf->iir.coeff_set1[index + 1] <<
+			AF_COEF_SHIFT;
+		isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A,
+			       base_coef_set1);
+		base_coef_set1 += AFCOEF_OFFSET;
+	}
+	/* set AFCOEF0010 Register */
+	isp_reg_writel(af->isp, conf->iir.coeff_set0[10],
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF0010);
+	/* set AFCOEF1010 Register */
+	isp_reg_writel(af->isp, conf->iir.coeff_set1[10],
+		       OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF1010);
+
+	/* PCR Register */
+	/* Set RGB Position */
+	pcr = conf->rgb_pos << AF_RGBPOS_SHIFT;
+	/* Set Accumulator Mode */
+	if (conf->fvmode == OMAP3ISP_AF_MODE_PEAK)
+		pcr |= AF_FVMODE;
+	/* Set A-law */
+	if (conf->alaw_enable)
+		pcr |= AF_ALAW_EN;
+	/* HMF Configurations */
+	if (conf->hmf.enable) {
+		/* Enable HMF */
+		pcr |= AF_MED_EN;
+		/* Set Median Threshold */
+		pcr |= conf->hmf.threshold << AF_MED_TH_SHIFT;
+	}
+	/* Set PCR Register */
+	isp_reg_clr_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			AF_PCR_MASK, pcr);
+
+	af->update = 0;
+	af->config_counter += af->inc_config;
+	af->inc_config = 0;
+	af->buf_size = conf->buf_size;
+}
+
+static void h3a_af_enable(struct ispstat *af, int enable)
+{
+	if (enable) {
+		isp_reg_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AF_EN);
+		/* This bit is already set if AEWB is enabled */
+		if (af->isp->isp_aewb.state != ISPSTAT_ENABLED)
+			isp_reg_set(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+				    ISPCTRL_H3A_CLK_EN);
+	} else {
+		isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR,
+			    ISPH3A_PCR_AF_EN);
+		/* This bit can't be cleared if AEWB is enabled */
+		if (af->isp->isp_aewb.state != ISPSTAT_ENABLED)
+			isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+				    ISPCTRL_H3A_CLK_EN);
+	}
+}
+
+static int h3a_af_busy(struct ispstat *af)
+{
+	return isp_reg_readl(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR)
+						& ISPH3A_PCR_BUSYAF;
+}
+
+static u32 h3a_af_get_buf_size(struct omap3isp_h3a_af_config *conf)
+{
+	return conf->paxel.h_cnt * conf->paxel.v_cnt * OMAP3ISP_AF_PAXEL_SIZE;
+}
+
+/* Function to check paxel parameters */
+static int h3a_af_validate_params(struct ispstat *af, void *new_conf)
+{
+	struct omap3isp_h3a_af_config *user_cfg = new_conf;
+	struct omap3isp_h3a_af_paxel *paxel_cfg = &user_cfg->paxel;
+	struct omap3isp_h3a_af_iir *iir_cfg = &user_cfg->iir;
+	int index;
+	u32 buf_size;
+
+	/* Check horizontal Count */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->h_cnt,
+			     OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN,
+			     OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX))
+		return -EINVAL;
+
+	/* Check Vertical Count */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->v_cnt,
+			     OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN,
+			     OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX))
+		return -EINVAL;
+
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->height, OMAP3ISP_AF_PAXEL_HEIGHT_MIN,
+			     OMAP3ISP_AF_PAXEL_HEIGHT_MAX) ||
+	    paxel_cfg->height % 2)
+		return -EINVAL;
+
+	/* Check width */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->width, OMAP3ISP_AF_PAXEL_WIDTH_MIN,
+			     OMAP3ISP_AF_PAXEL_WIDTH_MAX) ||
+	    paxel_cfg->width % 2)
+		return -EINVAL;
+
+	/* Check Line Increment */
+	if (IS_OUT_OF_BOUNDS(paxel_cfg->line_inc,
+			     OMAP3ISP_AF_PAXEL_INCREMENT_MIN,
+			     OMAP3ISP_AF_PAXEL_INCREMENT_MAX) ||
+	    paxel_cfg->line_inc % 2)
+		return -EINVAL;
+
+	/* Check Horizontal Start */
+	if ((paxel_cfg->h_start < iir_cfg->h_start) ||
+	    IS_OUT_OF_BOUNDS(paxel_cfg->h_start,
+			     OMAP3ISP_AF_PAXEL_HZSTART_MIN,
+			     OMAP3ISP_AF_PAXEL_HZSTART_MAX))
+		return -EINVAL;
+
+	/* Check IIR */
+	for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) {
+		if ((iir_cfg->coeff_set0[index]) > OMAP3ISP_AF_COEF_MAX)
+			return -EINVAL;
+
+		if ((iir_cfg->coeff_set1[index]) > OMAP3ISP_AF_COEF_MAX)
+			return -EINVAL;
+	}
+
+	if (IS_OUT_OF_BOUNDS(iir_cfg->h_start, OMAP3ISP_AF_IIRSH_MIN,
+			     OMAP3ISP_AF_IIRSH_MAX))
+		return -EINVAL;
+
+	/* Hack: If paxel size is 12, the 10th AF window may be corrupted */
+	if ((paxel_cfg->h_cnt * paxel_cfg->v_cnt > 9) &&
+	    (paxel_cfg->width * paxel_cfg->height == 12))
+		return -EINVAL;
+
+	buf_size = h3a_af_get_buf_size(user_cfg);
+	if (buf_size > user_cfg->buf_size)
+		/* User buf_size request wasn't enough */
+		user_cfg->buf_size = buf_size;
+	else if (user_cfg->buf_size > OMAP3ISP_AF_MAX_BUF_SIZE)
+		user_cfg->buf_size = OMAP3ISP_AF_MAX_BUF_SIZE;
+
+	return 0;
+}
+
+/* Update local parameters */
+static void h3a_af_set_params(struct ispstat *af, void *new_conf)
+{
+	struct omap3isp_h3a_af_config *user_cfg = new_conf;
+	struct omap3isp_h3a_af_config *cur_cfg = af->priv;
+	int update = 0;
+	int index;
+
+	/* alaw */
+	if (cur_cfg->alaw_enable != user_cfg->alaw_enable) {
+		update = 1;
+		goto out;
+	}
+
+	/* hmf */
+	if (cur_cfg->hmf.enable != user_cfg->hmf.enable) {
+		update = 1;
+		goto out;
+	}
+	if (cur_cfg->hmf.threshold != user_cfg->hmf.threshold) {
+		update = 1;
+		goto out;
+	}
+
+	/* rgbpos */
+	if (cur_cfg->rgb_pos != user_cfg->rgb_pos) {
+		update = 1;
+		goto out;
+	}
+
+	/* iir */
+	if (cur_cfg->iir.h_start != user_cfg->iir.h_start) {
+		update = 1;
+		goto out;
+	}
+	for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) {
+		if (cur_cfg->iir.coeff_set0[index] !=
+				user_cfg->iir.coeff_set0[index]) {
+			update = 1;
+			goto out;
+		}
+		if (cur_cfg->iir.coeff_set1[index] !=
+				user_cfg->iir.coeff_set1[index]) {
+			update = 1;
+			goto out;
+		}
+	}
+
+	/* paxel */
+	if ((cur_cfg->paxel.width != user_cfg->paxel.width) ||
+	    (cur_cfg->paxel.height != user_cfg->paxel.height) ||
+	    (cur_cfg->paxel.h_start != user_cfg->paxel.h_start) ||
+	    (cur_cfg->paxel.v_start != user_cfg->paxel.v_start) ||
+	    (cur_cfg->paxel.h_cnt != user_cfg->paxel.h_cnt) ||
+	    (cur_cfg->paxel.v_cnt != user_cfg->paxel.v_cnt) ||
+	    (cur_cfg->paxel.line_inc != user_cfg->paxel.line_inc)) {
+		update = 1;
+		goto out;
+	}
+
+	/* af_mode */
+	if (cur_cfg->fvmode != user_cfg->fvmode)
+		update = 1;
+
+out:
+	if (update || !af->configured) {
+		memcpy(cur_cfg, user_cfg, sizeof(*cur_cfg));
+		af->inc_config++;
+		af->update = 1;
+		/*
+		 * User might be asked for a bigger buffer than necessary for
+		 * this configuration. In order to return the right amount of
+		 * data during buffer request, let's calculate the size here
+		 * instead of stick with user_cfg->buf_size.
+		 */
+		cur_cfg->buf_size = h3a_af_get_buf_size(cur_cfg);
+	}
+}
+
+static long h3a_af_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_AF_CFG:
+		return omap3isp_stat_config(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_REQ:
+		return omap3isp_stat_request_statistics(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_EN: {
+		int *en = arg;
+		return omap3isp_stat_enable(stat, !!*en);
+	}
+	}
+
+	return -ENOIOCTLCMD;
+
+}
+
+static const struct ispstat_ops h3a_af_ops = {
+	.validate_params	= h3a_af_validate_params,
+	.set_params		= h3a_af_set_params,
+	.setup_regs		= h3a_af_setup_regs,
+	.enable			= h3a_af_enable,
+	.busy			= h3a_af_busy,
+};
+
+static const struct v4l2_subdev_core_ops h3a_af_subdev_core_ops = {
+	.ioctl = h3a_af_ioctl,
+	.subscribe_event = omap3isp_stat_subscribe_event,
+	.unsubscribe_event = omap3isp_stat_unsubscribe_event,
+};
+
+static const struct v4l2_subdev_video_ops h3a_af_subdev_video_ops = {
+	.s_stream = omap3isp_stat_s_stream,
+};
+
+static const struct v4l2_subdev_ops h3a_af_subdev_ops = {
+	.core = &h3a_af_subdev_core_ops,
+	.video = &h3a_af_subdev_video_ops,
+};
+
+/* Function to register the AF character device driver. */
+int omap3isp_h3a_af_init(struct isp_device *isp)
+{
+	struct ispstat *af = &isp->isp_af;
+	struct omap3isp_h3a_af_config *af_cfg;
+	struct omap3isp_h3a_af_config *af_recover_cfg;
+	int ret;
+
+	af_cfg = kzalloc(sizeof(*af_cfg), GFP_KERNEL);
+	if (af_cfg == NULL)
+		return -ENOMEM;
+
+	memset(af, 0, sizeof(*af));
+	af->ops = &h3a_af_ops;
+	af->priv = af_cfg;
+	af->dma_ch = -1;
+	af->event_type = V4L2_EVENT_OMAP3ISP_AF;
+	af->isp = isp;
+
+	/* Set recover state configuration */
+	af_recover_cfg = kzalloc(sizeof(*af_recover_cfg), GFP_KERNEL);
+	if (!af_recover_cfg) {
+		dev_err(af->isp->dev, "AF: cannot allocate memory for recover "
+				      "configuration.\n");
+		ret = -ENOMEM;
+		goto err_recover_alloc;
+	}
+
+	af_recover_cfg->paxel.h_start = OMAP3ISP_AF_PAXEL_HZSTART_MIN;
+	af_recover_cfg->paxel.width = OMAP3ISP_AF_PAXEL_WIDTH_MIN;
+	af_recover_cfg->paxel.height = OMAP3ISP_AF_PAXEL_HEIGHT_MIN;
+	af_recover_cfg->paxel.h_cnt = OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN;
+	af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN;
+	af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN;
+	if (h3a_af_validate_params(af, af_recover_cfg)) {
+		dev_err(af->isp->dev, "AF: recover configuration is "
+				      "invalid.\n");
+		ret = -EINVAL;
+		goto err_conf;
+	}
+
+	af_recover_cfg->buf_size = h3a_af_get_buf_size(af_recover_cfg);
+	af->recover_priv = af_recover_cfg;
+
+	ret = omap3isp_stat_init(af, "AF", &h3a_af_subdev_ops);
+	if (ret)
+		goto err_conf;
+
+	return 0;
+
+err_conf:
+	kfree(af_recover_cfg);
+err_recover_alloc:
+	kfree(af_cfg);
+
+	return ret;
+}
+
+void omap3isp_h3a_af_cleanup(struct isp_device *isp)
+{
+	kfree(isp->isp_af.priv);
+	kfree(isp->isp_af.recover_priv);
+	omap3isp_stat_free(&isp->isp_af);
+}
diff --git a/drivers/media/video/isp/isphist.c b/drivers/media/video/isp/isphist.c
new file mode 100644
index 0000000..a43eb92
--- /dev/null
+++ b/drivers/media/video/isp/isphist.c
@@ -0,0 +1,520 @@
+/*
+ * isphist.c
+ *
+ * TI OMAP3 ISP - Histogram module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "isphist.h"
+
+#define HIST_CONFIG_DMA	1
+
+#define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
+
+/*
+ * hist_reset_mem - clear Histogram memory before start stats engine.
+ */
+static void hist_reset_mem(struct ispstat *hist)
+{
+	struct isp_device *isp = hist->isp;
+	struct omap3isp_hist_config *conf = hist->priv;
+	unsigned int i;
+
+	isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR);
+
+	/*
+	 * By setting it, the histogram internal buffer is being cleared at the
+	 * same time it's being read. This bit must be cleared afterwards.
+	 */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR);
+
+	/*
+	 * We'll clear 4 words at each iteration for optimization. It avoids
+	 * 3/4 of the jumps. We also know HIST_MEM_SIZE is divisible by 4.
+	 */
+	for (i = OMAP3ISP_HIST_MEM_SIZE / 4; i > 0; i--) {
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+	}
+	isp_reg_clr(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR);
+
+	hist->wait_acc_frames = conf->num_acc_frames;
+}
+
+static void hist_dma_config(struct ispstat *hist)
+{
+	hist->dma_config.data_type = OMAP_DMA_DATA_TYPE_S32;
+	hist->dma_config.sync_mode = OMAP_DMA_SYNC_ELEMENT;
+	hist->dma_config.frame_count = 1;
+	hist->dma_config.src_amode = OMAP_DMA_AMODE_CONSTANT;
+	hist->dma_config.src_start = OMAP3ISP_HIST_REG_BASE + ISPHIST_DATA;
+	hist->dma_config.dst_amode = OMAP_DMA_AMODE_POST_INC;
+	hist->dma_config.src_or_dst_synch = OMAP_DMA_SRC_SYNC;
+}
+
+/*
+ * hist_setup_regs - Helper function to update Histogram registers.
+ */
+static void hist_setup_regs(struct ispstat *hist, void *priv)
+{
+	struct isp_device *isp = hist->isp;
+	struct omap3isp_hist_config *conf = priv;
+	int c;
+	u32 cnt;
+	u32 wb_gain;
+	u32 reg_hor[OMAP3ISP_HIST_MAX_REGIONS];
+	u32 reg_ver[OMAP3ISP_HIST_MAX_REGIONS];
+
+	if (!hist->update || hist->state == ISPSTAT_DISABLED ||
+	    hist->state == ISPSTAT_DISABLING)
+		return;
+
+	cnt = conf->cfa << ISPHIST_CNT_CFA_SHIFT;
+
+	wb_gain = conf->wg[0] << ISPHIST_WB_GAIN_WG00_SHIFT;
+	wb_gain |= conf->wg[1] << ISPHIST_WB_GAIN_WG01_SHIFT;
+	wb_gain |= conf->wg[2] << ISPHIST_WB_GAIN_WG02_SHIFT;
+	if (conf->cfa == OMAP3ISP_HIST_CFA_BAYER)
+		wb_gain |= conf->wg[3] << ISPHIST_WB_GAIN_WG03_SHIFT;
+
+	/* Regions size and position */
+	for (c = 0; c < OMAP3ISP_HIST_MAX_REGIONS; c++) {
+		if (c < conf->num_regions) {
+			reg_hor[c] = conf->region[c].h_start <<
+				     ISPHIST_REG_START_SHIFT;
+			reg_hor[c] = conf->region[c].h_end <<
+				     ISPHIST_REG_END_SHIFT;
+			reg_ver[c] = conf->region[c].v_start <<
+				     ISPHIST_REG_START_SHIFT;
+			reg_ver[c] = conf->region[c].v_end <<
+				     ISPHIST_REG_END_SHIFT;
+		} else {
+			reg_hor[c] = 0;
+			reg_ver[c] = 0;
+		}
+	}
+
+	cnt |= conf->hist_bins << ISPHIST_CNT_BINS_SHIFT;
+	switch (conf->hist_bins) {
+	case OMAP3ISP_HIST_BINS_256:
+		cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 8) <<
+			ISPHIST_CNT_SHIFT_SHIFT;
+		break;
+	case OMAP3ISP_HIST_BINS_128:
+		cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 7) <<
+			ISPHIST_CNT_SHIFT_SHIFT;
+		break;
+	case OMAP3ISP_HIST_BINS_64:
+		cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 6) <<
+			ISPHIST_CNT_SHIFT_SHIFT;
+		break;
+	default: /* OMAP3ISP_HIST_BINS_32 */
+		cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 5) <<
+			ISPHIST_CNT_SHIFT_SHIFT;
+		break;
+	}
+
+	hist_reset_mem(hist);
+
+	isp_reg_writel(isp, cnt, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT);
+	isp_reg_writel(isp, wb_gain,  OMAP3_ISP_IOMEM_HIST, ISPHIST_WB_GAIN);
+	isp_reg_writel(isp, reg_hor[0], OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_HORZ);
+	isp_reg_writel(isp, reg_ver[0], OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_VERT);
+	isp_reg_writel(isp, reg_hor[1], OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_HORZ);
+	isp_reg_writel(isp, reg_ver[1], OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_VERT);
+	isp_reg_writel(isp, reg_hor[2], OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_HORZ);
+	isp_reg_writel(isp, reg_ver[2], OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_VERT);
+	isp_reg_writel(isp, reg_hor[3], OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_HORZ);
+	isp_reg_writel(isp, reg_ver[3], OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_VERT);
+
+	hist->update = 0;
+	hist->config_counter += hist->inc_config;
+	hist->inc_config = 0;
+	hist->buf_size = conf->buf_size;
+}
+
+static void hist_enable(struct ispstat *hist, int enable)
+{
+	if (enable) {
+		isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR,
+			    ISPHIST_PCR_ENABLE);
+		isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+			    ISPCTRL_HIST_CLK_EN);
+	} else {
+		isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR,
+			    ISPHIST_PCR_ENABLE);
+		isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL,
+			    ISPCTRL_HIST_CLK_EN);
+	}
+}
+
+static int hist_busy(struct ispstat *hist)
+{
+	return isp_reg_readl(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR)
+						& ISPHIST_PCR_BUSY;
+}
+
+static void hist_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct ispstat *hist = data;
+
+	if (ch_status & ~OMAP_DMA_BLOCK_IRQ) {
+		dev_dbg(hist->isp->dev, "hist: DMA error. status = 0x%04x\n",
+			ch_status);
+		omap_stop_dma(lch);
+		hist_reset_mem(hist);
+		atomic_set(&hist->buf_err, 1);
+	}
+	isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT,
+		    ISPHIST_CNT_CLEAR);
+
+	omap3isp_stat_dma_isr(hist);
+	if (hist->state != ISPSTAT_DISABLED)
+		omap3isp_hist_dma_done(hist->isp);
+}
+
+static int hist_buf_dma(struct ispstat *hist)
+{
+	dma_addr_t dma_addr = hist->active_buf->dma_addr;
+
+	if (unlikely(!dma_addr)) {
+		dev_dbg(hist->isp->dev, "hist: invalid DMA buffer address\n");
+		hist_reset_mem(hist);
+		return STAT_NO_BUF;
+	}
+
+	isp_reg_writel(hist->isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR);
+	isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT,
+		    ISPHIST_CNT_CLEAR);
+	omap3isp_flush(hist->isp);
+	hist->dma_config.dst_start = dma_addr;
+	hist->dma_config.elem_count = hist->buf_size / sizeof(u32);
+	omap_set_dma_params(hist->dma_ch, &hist->dma_config);
+
+	omap_start_dma(hist->dma_ch);
+
+	return STAT_BUF_WAITING_DMA;
+}
+
+static int hist_buf_pio(struct ispstat *hist)
+{
+	struct isp_device *isp = hist->isp;
+	u32 *buf = hist->active_buf->virt_addr;
+	unsigned int i;
+
+	if (!buf) {
+		dev_dbg(isp->dev, "hist: invalid PIO buffer address\n");
+		hist_reset_mem(hist);
+		return STAT_NO_BUF;
+	}
+
+	isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR);
+
+	/*
+	 * By setting it, the histogram internal buffer is being cleared at the
+	 * same time it's being read. This bit must be cleared just after all
+	 * data is acquired.
+	 */
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR);
+
+	/*
+	 * We'll read 4 times a 4-bytes-word at each iteration for
+	 * optimization. It avoids 3/4 of the jumps. We also know buf_size is
+	 * divisible by 16.
+	 */
+	for (i = hist->buf_size / 16; i > 0; i--) {
+		*buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		*buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		*buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+		*buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA);
+	}
+	isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT,
+		    ISPHIST_CNT_CLEAR);
+
+	return STAT_BUF_DONE;
+}
+
+/*
+ * hist_buf_process - Callback from ISP driver for HIST interrupt.
+ */
+static int hist_buf_process(struct ispstat *hist)
+{
+	struct omap3isp_hist_config *user_cfg = hist->priv;
+	int ret;
+
+	if (atomic_read(&hist->buf_err) || hist->state != ISPSTAT_ENABLED) {
+		hist_reset_mem(hist);
+		return STAT_NO_BUF;
+	}
+
+	if (--(hist->wait_acc_frames))
+		return STAT_NO_BUF;
+
+	if (HIST_USING_DMA(hist))
+		ret = hist_buf_dma(hist);
+	else
+		ret = hist_buf_pio(hist);
+
+	hist->wait_acc_frames = user_cfg->num_acc_frames;
+
+	return ret;
+}
+
+static u32 hist_get_buf_size(struct omap3isp_hist_config *conf)
+{
+	return OMAP3ISP_HIST_MEM_SIZE_BINS(conf->hist_bins) * conf->num_regions;
+}
+
+/*
+ * hist_validate_params - Helper function to check user given params.
+ * @user_cfg: Pointer to user configuration structure.
+ *
+ * Returns 0 on success configuration.
+ */
+static int hist_validate_params(struct ispstat *hist, void *new_conf)
+{
+	struct omap3isp_hist_config *user_cfg = new_conf;
+	int c;
+	u32 buf_size;
+
+	if (user_cfg->cfa > OMAP3ISP_HIST_CFA_FOVEONX3)
+		return -EINVAL;
+
+	/* Regions size and position */
+
+	if ((user_cfg->num_regions < OMAP3ISP_HIST_MIN_REGIONS) ||
+	    (user_cfg->num_regions > OMAP3ISP_HIST_MAX_REGIONS))
+		return -EINVAL;
+
+	/* Regions */
+	for (c = 0; c < user_cfg->num_regions; c++) {
+		if (user_cfg->region[c].h_start & ~ISPHIST_REG_START_END_MASK)
+			return -EINVAL;
+		if (user_cfg->region[c].h_end & ~ISPHIST_REG_START_END_MASK)
+			return -EINVAL;
+		if (user_cfg->region[c].v_start & ~ISPHIST_REG_START_END_MASK)
+			return -EINVAL;
+		if (user_cfg->region[c].v_end & ~ISPHIST_REG_START_END_MASK)
+			return -EINVAL;
+		if (user_cfg->region[c].h_start > user_cfg->region[c].h_end)
+			return -EINVAL;
+		if (user_cfg->region[c].v_start > user_cfg->region[c].v_end)
+			return -EINVAL;
+	}
+
+	switch (user_cfg->num_regions) {
+	case 1:
+		if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_256)
+			return -EINVAL;
+		break;
+	case 2:
+		if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_128)
+			return -EINVAL;
+		break;
+	default: /* 3 or 4 */
+		if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_64)
+			return -EINVAL;
+		break;
+	}
+
+	buf_size = hist_get_buf_size(user_cfg);
+	if (buf_size > user_cfg->buf_size)
+		/* User's buf_size request wasn't enoght */
+		user_cfg->buf_size = buf_size;
+	else if (user_cfg->buf_size > OMAP3ISP_HIST_MAX_BUF_SIZE)
+		user_cfg->buf_size = OMAP3ISP_HIST_MAX_BUF_SIZE;
+
+	return 0;
+}
+
+static int hist_comp_params(struct ispstat *hist,
+			    struct omap3isp_hist_config *user_cfg)
+{
+	struct omap3isp_hist_config *cur_cfg = hist->priv;
+	int c;
+
+	if (cur_cfg->cfa != user_cfg->cfa)
+		return 1;
+
+	if (cur_cfg->num_acc_frames != user_cfg->num_acc_frames)
+		return 1;
+
+	if (cur_cfg->hist_bins != user_cfg->hist_bins)
+		return 1;
+
+	for (c = 0; c < OMAP3ISP_HIST_MAX_WG; c++) {
+		if (c == 3 && user_cfg->cfa == OMAP3ISP_HIST_CFA_FOVEONX3)
+			break;
+		else if (cur_cfg->wg[c] != user_cfg->wg[c])
+			return 1;
+	}
+
+	if (cur_cfg->num_regions != user_cfg->num_regions)
+		return 1;
+
+	/* Regions */
+	for (c = 0; c < user_cfg->num_regions; c++) {
+		if (cur_cfg->region[c].h_start != user_cfg->region[c].h_start)
+			return 1;
+		if (cur_cfg->region[c].h_end != user_cfg->region[c].h_end)
+			return 1;
+		if (cur_cfg->region[c].v_start != user_cfg->region[c].v_start)
+			return 1;
+		if (cur_cfg->region[c].v_end != user_cfg->region[c].v_end)
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * hist_update_params - Helper function to check and store user given params.
+ * @new_conf: Pointer to user configuration structure.
+ */
+static void hist_set_params(struct ispstat *hist, void *new_conf)
+{
+	struct omap3isp_hist_config *user_cfg = new_conf;
+	struct omap3isp_hist_config *cur_cfg = hist->priv;
+
+	if (!hist->configured || hist_comp_params(hist, user_cfg)) {
+		memcpy(cur_cfg, user_cfg, sizeof(*user_cfg));
+		if (user_cfg->num_acc_frames == 0)
+			user_cfg->num_acc_frames = 1;
+		hist->inc_config++;
+		hist->update = 1;
+		/*
+		 * User might be asked for a bigger buffer than necessary for
+		 * this configuration. In order to return the right amount of
+		 * data during buffer request, let's calculate the size here
+		 * instead of stick with user_cfg->buf_size.
+		 */
+		cur_cfg->buf_size = hist_get_buf_size(cur_cfg);
+
+	}
+}
+
+static long hist_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_HIST_CFG:
+		return omap3isp_stat_config(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_REQ:
+		return omap3isp_stat_request_statistics(stat, arg);
+	case VIDIOC_OMAP3ISP_STAT_EN: {
+		int *en = arg;
+		return omap3isp_stat_enable(stat, !!*en);
+	}
+	}
+
+	return -ENOIOCTLCMD;
+
+}
+
+static const struct ispstat_ops hist_ops = {
+	.validate_params	= hist_validate_params,
+	.set_params		= hist_set_params,
+	.setup_regs		= hist_setup_regs,
+	.enable			= hist_enable,
+	.busy			= hist_busy,
+	.buf_process		= hist_buf_process,
+};
+
+static const struct v4l2_subdev_core_ops hist_subdev_core_ops = {
+	.ioctl = hist_ioctl,
+	.subscribe_event = omap3isp_stat_subscribe_event,
+	.unsubscribe_event = omap3isp_stat_unsubscribe_event,
+};
+
+static const struct v4l2_subdev_video_ops hist_subdev_video_ops = {
+	.s_stream = omap3isp_stat_s_stream,
+};
+
+static const struct v4l2_subdev_ops hist_subdev_ops = {
+	.core = &hist_subdev_core_ops,
+	.video = &hist_subdev_video_ops,
+};
+
+/*
+ * omap3isp_hist_init - Module Initialization.
+ */
+int omap3isp_hist_init(struct isp_device *isp)
+{
+	struct ispstat *hist = &isp->isp_hist;
+	struct omap3isp_hist_config *hist_cfg;
+	int ret = -1;
+
+	hist_cfg = kzalloc(sizeof(*hist_cfg), GFP_KERNEL);
+	if (hist_cfg == NULL)
+		return -ENOMEM;
+
+	memset(hist, 0, sizeof(*hist));
+	if (HIST_CONFIG_DMA)
+		ret = omap_request_dma(OMAP24XX_DMA_NO_DEVICE, "DMA_ISP_HIST",
+				       hist_dma_cb, hist, &hist->dma_ch);
+	if (ret) {
+		if (HIST_CONFIG_DMA)
+			dev_warn(isp->dev, "hist: DMA request channel failed. "
+					   "Using PIO only.\n");
+		hist->dma_ch = -1;
+	} else {
+		dev_dbg(isp->dev, "hist: DMA channel = %d\n", hist->dma_ch);
+		hist_dma_config(hist);
+		omap_enable_dma_irq(hist->dma_ch, OMAP_DMA_BLOCK_IRQ);
+	}
+
+	hist->ops = &hist_ops;
+	hist->priv = hist_cfg;
+	hist->event_type = V4L2_EVENT_OMAP3ISP_HIST;
+	hist->isp = isp;
+
+	ret = omap3isp_stat_init(hist, "histogram", &hist_subdev_ops);
+	if (ret) {
+		kfree(hist_cfg);
+		if (HIST_USING_DMA(hist))
+			omap_free_dma(hist->dma_ch);
+	}
+
+	return ret;
+}
+
+/*
+ * omap3isp_hist_cleanup - Module cleanup.
+ */
+void omap3isp_hist_cleanup(struct isp_device *isp)
+{
+	if (HIST_USING_DMA(&isp->isp_hist))
+		omap_free_dma(isp->isp_hist.dma_ch);
+	kfree(isp->isp_hist.priv);
+	omap3isp_stat_free(&isp->isp_hist);
+}
diff --git a/drivers/media/video/isp/isphist.h b/drivers/media/video/isp/isphist.h
new file mode 100644
index 0000000..247192b
--- /dev/null
+++ b/drivers/media/video/isp/isphist.h
@@ -0,0 +1,40 @@
+/*
+ * isphist.h
+ *
+ * TI OMAP3 ISP - Histogram module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_HIST_H
+#define OMAP3_ISP_HIST_H
+
+#include <linux/omap3isp.h>
+
+#define ISPHIST_IN_BIT_WIDTH_CCDC	10
+
+struct isp_device;
+
+int omap3isp_hist_init(struct isp_device *isp);
+void omap3isp_hist_cleanup(struct isp_device *isp);
+
+#endif /* OMAP3_ISP_HIST */
diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c
new file mode 100644
index 0000000..869583c
--- /dev/null
+++ b/drivers/media/video/isp/isppreview.c
@@ -0,0 +1,2120 @@
+/*
+ * isppreview.c
+ *
+ * TI OMAP3 ISP driver - Preview module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "isppreview.h"
+
+/* Default values in Office Flourescent Light for RGBtoRGB Blending */
+static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
+	{	/* RGB-RGB Matrix */
+		{0x01E2, 0x0F30, 0x0FEE},
+		{0x0F9B, 0x01AC, 0x0FB9},
+		{0x0FE0, 0x0EC0, 0x0260}
+	},	/* RGB Offset */
+	{0x0000, 0x0000, 0x0000}
+};
+
+/* Default values in Office Flourescent Light for RGB to YUV Conversion*/
+static struct omap3isp_prev_csc flr_prev_csc = {
+	{	/* CSC Coef Matrix */
+		{66, 129, 25},
+		{-38, -75, 112},
+		{112, -94 , -18}
+	},	/* CSC Offset */
+	{0x0, 0x0, 0x0}
+};
+
+/* Default values in Office Flourescent Light for CFA Gradient*/
+#define FLR_CFA_GRADTHRS_HORZ	0x28
+#define FLR_CFA_GRADTHRS_VERT	0x28
+
+/* Default values in Office Flourescent Light for Chroma Suppression*/
+#define FLR_CSUP_GAIN		0x0D
+#define FLR_CSUP_THRES		0xEB
+
+/* Default values in Office Flourescent Light for Noise Filter*/
+#define FLR_NF_STRGTH		0x03
+
+/* Default values for White Balance */
+#define FLR_WBAL_DGAIN		0x100
+#define FLR_WBAL_COEF		0x20
+
+/* Default values in Office Flourescent Light for Black Adjustment*/
+#define FLR_BLKADJ_BLUE		0x0
+#define FLR_BLKADJ_GREEN	0x0
+#define FLR_BLKADJ_RED		0x0
+
+#define DEF_DETECT_CORRECT_VAL	0xe
+
+#define PREV_MIN_WIDTH		64
+#define PREV_MIN_HEIGHT		8
+#define PREV_MAX_HEIGHT		16384
+
+/*
+ * Coeficient Tables for the submodules in Preview.
+ * Array is initialised with the values from.the tables text file.
+ */
+
+/*
+ * CFA Filter Coefficient Table
+ *
+ */
+static u32 cfa_coef_table[] = {
+#include "cfa_coef_table.h"
+};
+
+/*
+ * Default Gamma Correction Table - All components
+ */
+static u32 gamma_table[] = {
+#include "gamma_table.h"
+};
+
+/*
+ * Noise Filter Threshold table
+ */
+static u32 noise_filter_table[] = {
+#include "noise_filter_table.h"
+};
+
+/*
+ * Luminance Enhancement Table
+ */
+static u32 luma_enhance_table[] = {
+#include "luma_enhance_table.h"
+};
+
+/*
+ * preview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview.
+ * @enable: 1 - Reverse the A-Law done in CCDC.
+ */
+static void
+preview_enable_invalaw(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+}
+
+/*
+ * preview_enable_drkframe_capture - Enable/Disable of the darkframe capture.
+ * @prev -
+ * @enable: 1 - Enable, 0 - Disable
+ *
+ * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also
+ * The proccess is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFCAP);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFCAP);
+}
+
+/*
+ * preview_enable_drkframe - Enable/Disable of the darkframe subtract.
+ * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is
+ *          subtracted with the pixels in the current frame.
+ *
+ * The proccess is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFEN);
+}
+
+/*
+ * preview_config_drkf_shadcomp - Configures shift value in shading comp.
+ * @scomp_shtval: 3bit value of shift used in shading compensation.
+ */
+static void
+preview_config_drkf_shadcomp(struct isp_prev_device *prev,
+			     const void *scomp_shtval)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const u32 *shtval = scomp_shtval;
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_SCOMP_SFT_MASK,
+			*shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT);
+}
+
+/*
+ * preview_enable_hmed - Enables/Disables of the Horizontal Median Filter.
+ * @enable: 1 - Enables Horizontal Median Filter.
+ */
+static void
+preview_enable_hmed(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_HMEDEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_HMEDEN);
+}
+
+/*
+ * preview_config_hmed - Configures the Horizontal Median Filter.
+ * @prev_hmed: Structure containing the odd and even distance between the
+ *             pixels in the image along with the filter threshold.
+ */
+static void
+preview_config_hmed(struct isp_prev_device *prev, const void *prev_hmed)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_hmed *hmed = prev_hmed;
+
+	isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) |
+		       (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) |
+		       (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED);
+}
+
+/*
+ * preview_config_noisefilter - Configures the Noise Filter.
+ * @prev_nf: Structure containing the noisefilter table, strength to be used
+ *           for the noise filter and the defect correction enable flag.
+ */
+static void
+preview_config_noisefilter(struct isp_prev_device *prev, const void *prev_nf)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_nf *nf = prev_nf;
+	unsigned int i;
+
+	isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF);
+	isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) {
+		isp_reg_writel(isp, nf->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_dcor - Configures the defect correction
+ * @prev_dcor: Structure containing the defect correct thresholds
+ */
+static void
+preview_config_dcor(struct isp_prev_device *prev, const void *prev_dcor)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_dcor *dcor = prev_dcor;
+
+	isp_reg_writel(isp, dcor->detect_correct[0],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0);
+	isp_reg_writel(isp, dcor->detect_correct[1],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1);
+	isp_reg_writel(isp, dcor->detect_correct[2],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2);
+	isp_reg_writel(isp, dcor->detect_correct[3],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3);
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_DCCOUP,
+			dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0);
+}
+
+/*
+ * preview_config_cfa - Configures the CFA Interpolation parameters.
+ * @prev_cfa: Structure containing the CFA interpolation table, CFA format
+ *            in the image, vertical and horizontal gradient threshold.
+ */
+static void
+preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_cfa *cfa = prev_cfa;
+	unsigned int i;
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_CFAFMT_MASK,
+			cfa->format << ISPPRV_PCR_CFAFMT_SHIFT);
+
+	isp_reg_writel(isp,
+		(cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
+		(cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT),
+		OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA);
+
+	isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+
+	for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) {
+		isp_reg_writel(isp, cfa->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_gammacorrn - Configures the Gamma Correction table values
+ * @gtable: Structure containing the table for red, blue, green gamma table.
+ */
+static void
+preview_config_gammacorrn(struct isp_prev_device *prev, const void *gtable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_gtables *gt = gtable;
+	unsigned int i;
+
+	isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+
+	isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+
+	isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+}
+
+/*
+ * preview_config_luma_enhancement - Sets the Luminance Enhancement table.
+ * @ytable: Structure containing the table for Luminance Enhancement table.
+ */
+static void
+preview_config_luma_enhancement(struct isp_prev_device *prev,
+				const void *ytable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_luma *yt = ytable;
+	unsigned int i;
+
+	isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) {
+		isp_reg_writel(isp, yt->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_chroma_suppression - Configures the Chroma Suppression.
+ * @csup: Structure containing the threshold value for suppression
+ *        and the hypass filter enable flag.
+ */
+static void
+preview_config_chroma_suppression(struct isp_prev_device *prev,
+				  const void *csup)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_csup *cs = csup;
+
+	isp_reg_writel(isp,
+		       cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) |
+		       (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP);
+}
+
+/*
+ * preview_enable_noisefilter - Enables/Disables the Noise Filter.
+ * @enable: 1 - Enables the Noise Filter.
+ */
+static void
+preview_enable_noisefilter(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_NFEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_NFEN);
+}
+
+/*
+ * preview_enable_dcor - Enables/Disables the defect correction.
+ * @enable: 1 - Enables the defect correction.
+ */
+static void
+preview_enable_dcor(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DCOREN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DCOREN);
+}
+
+/*
+ * preview_enable_cfa - Enable/Disable the CFA Interpolation.
+ * @enable: 1 - Enables the CFA.
+ */
+static void
+preview_enable_cfa(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_CFAEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_CFAEN);
+}
+
+/*
+ * preview_enable_gammabypass - Enables/Disables the GammaByPass
+ * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB.
+ *          0 - Goes through Gamma Correction. input and output is 10bit.
+ */
+static void
+preview_enable_gammabypass(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_GAMMA_BYPASS);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_GAMMA_BYPASS);
+}
+
+/*
+ * preview_enable_luma_enhancement - Enables/Disables Luminance Enhancement
+ * @enable: 1 - Enable the Luminance Enhancement.
+ */
+static void
+preview_enable_luma_enhancement(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_YNENHEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_YNENHEN);
+}
+
+/*
+ * preview_enable_chroma_suppression - Enables/Disables Chrominance Suppr.
+ * @enable: 1 - Enable the Chrominance Suppression.
+ */
+static void
+preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SUPEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SUPEN);
+}
+
+/*
+ * preview_config_whitebalance - Configures the White Balance parameters.
+ * @prev_wbal: Structure containing the digital gain and white balance
+ *             coefficient.
+ *
+ * Coefficient matrix always with default values.
+ */
+static void
+preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_wbal *wbal = prev_wbal;
+	u32 val;
+
+	isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN);
+
+	val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT;
+	val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT;
+	val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT;
+	val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN);
+
+	isp_reg_writel(isp,
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL);
+}
+
+/*
+ * preview_config_blkadj - Configures the Black Adjustment parameters.
+ * @prev_blkadj: Structure containing the black adjustment towards red, green,
+ *               blue.
+ */
+static void
+preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_blkadj *blkadj = prev_blkadj;
+
+	isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) |
+		       (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) |
+		       (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF);
+}
+
+/*
+ * preview_config_rgb_blending - Configures the RGB-RGB Blending matrix.
+ * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb
+ *           offset.
+ */
+static void
+preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_rgbtorgb *rgbrgb = rgb2rgb;
+	u32 val;
+
+	val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT;
+	val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1);
+
+	val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT;
+	val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2);
+
+	val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT;
+	val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3);
+
+	val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT;
+	val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4);
+
+	val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5);
+
+	val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT;
+	val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1);
+
+	val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2);
+}
+
+/*
+ * Configures the RGB-YCbYCr conversion matrix
+ * @prev_csc: Structure containing the RGB to YCbYCr matrix and the
+ *            YCbCr offset.
+ */
+static void
+preview_config_rgb_to_ycbcr(struct isp_prev_device *prev, const void *prev_csc)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_csc *csc = prev_csc;
+	u32 val;
+
+	val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT;
+	val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT;
+	val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0);
+
+	val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT;
+	val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT;
+	val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1);
+
+	val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT;
+	val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT;
+	val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2);
+
+	val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT;
+	val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT;
+	val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET);
+}
+
+/*
+ * preview_update_contrast - Updates the contrast.
+ * @contrast: Pointer to hold the current programmed contrast value.
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_update_contrast(struct isp_prev_device *prev, u8 contrast)
+{
+	struct prev_params *params = &prev->params;
+
+	if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) {
+		params->contrast = contrast * ISPPRV_CONTRAST_UNITS;
+		prev->update |= PREV_CONTRAST;
+	}
+}
+
+/*
+ * preview_config_contrast - Configures the Contrast.
+ * @params: Contrast value (u8 pointer, U8Q0 format).
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_config_contrast(struct isp_prev_device *prev, const void *params)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+			0xff << ISPPRV_CNT_BRT_CNT_SHIFT,
+			*(u8 *)params << ISPPRV_CNT_BRT_CNT_SHIFT);
+}
+
+/*
+ * preview_update_brightness - Updates the brightness in preview module.
+ * @brightness: Pointer to hold the current programmed brightness value.
+ *
+ */
+static void
+preview_update_brightness(struct isp_prev_device *prev, u8 brightness)
+{
+	struct prev_params *params = &prev->params;
+
+	if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) {
+		params->brightness = brightness * ISPPRV_BRIGHT_UNITS;
+		prev->update |= PREV_BRIGHTNESS;
+	}
+}
+
+/*
+ * preview_config_brightness - Configures the brightness.
+ * @params: Brightness value (u8 pointer, U8Q0 format).
+ */
+static void
+preview_config_brightness(struct isp_prev_device *prev, const void *params)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+			0xff << ISPPRV_CNT_BRT_BRT_SHIFT,
+			*(u8 *)params << ISPPRV_CNT_BRT_BRT_SHIFT);
+}
+
+/*
+ * preview_config_yc_range - Configures the max and min Y and C values.
+ * @yclimit: Structure containing the range of Y and C values.
+ */
+static void
+preview_config_yc_range(struct isp_prev_device *prev, const void *yclimit)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_yclimit *yc = yclimit;
+
+	isp_reg_writel(isp,
+		       yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT |
+		       yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT |
+		       yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT |
+		       yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC);
+}
+
+/* preview parameters update structure */
+struct preview_update {
+	int cfg_bit;
+	int feature_bit;
+	void (*config)(struct isp_prev_device *, const void *);
+	void (*enable)(struct isp_prev_device *, u8);
+};
+
+static struct preview_update update_attrs[] = {
+	{OMAP3ISP_PREV_LUMAENH, PREV_LUMA_ENHANCE,
+		preview_config_luma_enhancement,
+		preview_enable_luma_enhancement},
+	{OMAP3ISP_PREV_INVALAW, PREV_INVERSE_ALAW,
+		NULL,
+		preview_enable_invalaw},
+	{OMAP3ISP_PREV_HRZ_MED, PREV_HORZ_MEDIAN_FILTER,
+		preview_config_hmed,
+		preview_enable_hmed},
+	{OMAP3ISP_PREV_CFA, PREV_CFA,
+		preview_config_cfa,
+		preview_enable_cfa},
+	{OMAP3ISP_PREV_CHROMA_SUPP, PREV_CHROMA_SUPPRESS,
+		preview_config_chroma_suppression,
+		preview_enable_chroma_suppression},
+	{OMAP3ISP_PREV_WB, PREV_WB,
+		preview_config_whitebalance,
+		NULL},
+	{OMAP3ISP_PREV_BLKADJ, PREV_BLKADJ,
+		preview_config_blkadj,
+		NULL},
+	{OMAP3ISP_PREV_RGB2RGB, PREV_RGB2RGB,
+		preview_config_rgb_blending,
+		NULL},
+	{OMAP3ISP_PREV_COLOR_CONV, PREV_COLOR_CONV,
+		preview_config_rgb_to_ycbcr,
+		NULL},
+	{OMAP3ISP_PREV_YC_LIMIT, PREV_YCLIMITS,
+		preview_config_yc_range,
+		NULL},
+	{OMAP3ISP_PREV_DEFECT_COR, PREV_DEFECT_COR,
+		preview_config_dcor,
+		preview_enable_dcor},
+	{OMAP3ISP_PREV_GAMMABYPASS, PREV_GAMMA_BYPASS,
+		NULL,
+		preview_enable_gammabypass},
+	{OMAP3ISP_PREV_DRK_FRM_CAPTURE, PREV_DARK_FRAME_CAPTURE,
+		NULL,
+		preview_enable_drkframe_capture},
+	{OMAP3ISP_PREV_DRK_FRM_SUBTRACT, PREV_DARK_FRAME_SUBTRACT,
+		NULL,
+		preview_enable_drkframe},
+	{OMAP3ISP_PREV_LENS_SHADING, PREV_LENS_SHADING,
+		preview_config_drkf_shadcomp,
+		preview_enable_drkframe},
+	{OMAP3ISP_PREV_NF, PREV_NOISE_FILTER,
+		preview_config_noisefilter,
+		preview_enable_noisefilter},
+	{OMAP3ISP_PREV_GAMMA, PREV_GAMMA,
+		preview_config_gammacorrn,
+		NULL},
+	{-1, PREV_CONTRAST,
+		preview_config_contrast,
+		NULL},
+	{-1, PREV_BRIGHTNESS,
+		preview_config_brightness,
+		NULL},
+};
+
+/*
+ * __preview_get_ptrs - helper function which return pointers to members
+ *                         of params and config structures.
+ * @params - pointer to preview_params structure.
+ * @param - return pointer to appropriate structure field.
+ * @configs - pointer to update config structure.
+ * @config - return pointer to appropriate structure field.
+ * @bit - for which feature to return pointers.
+ * Return size of coresponding prev_params member
+ */
+static u32
+__preview_get_ptrs(struct prev_params *params, void **param,
+		   struct omap3isp_prev_update_config *configs,
+		   void __user **config, u32 bit)
+{
+#define CHKARG(cfgs, cfg, field)				\
+	if (cfgs && cfg) {					\
+		*(cfg) = (cfgs)->field;				\
+	}
+
+	switch (bit) {
+	case PREV_HORZ_MEDIAN_FILTER:
+		*param = &params->hmed;
+		CHKARG(configs, config, hmed)
+		return sizeof(params->hmed);
+	case PREV_NOISE_FILTER:
+		*param = &params->nf;
+		CHKARG(configs, config, nf)
+		return sizeof(params->nf);
+		break;
+	case PREV_CFA:
+		*param = &params->cfa;
+		CHKARG(configs, config, cfa)
+		return sizeof(params->cfa);
+	case PREV_LUMA_ENHANCE:
+		*param = &params->luma;
+		CHKARG(configs, config, luma)
+		return sizeof(params->luma);
+	case PREV_CHROMA_SUPPRESS:
+		*param = &params->csup;
+		CHKARG(configs, config, csup)
+		return sizeof(params->csup);
+	case PREV_DEFECT_COR:
+		*param = &params->dcor;
+		CHKARG(configs, config, dcor)
+		return sizeof(params->dcor);
+	case PREV_BLKADJ:
+		*param = &params->blk_adj;
+		CHKARG(configs, config, blkadj)
+		return sizeof(params->blk_adj);
+	case PREV_YCLIMITS:
+		*param = &params->yclimit;
+		CHKARG(configs, config, yclimit)
+		return sizeof(params->yclimit);
+	case PREV_RGB2RGB:
+		*param = &params->rgb2rgb;
+		CHKARG(configs, config, rgb2rgb)
+		return sizeof(params->rgb2rgb);
+	case PREV_COLOR_CONV:
+		*param = &params->rgb2ycbcr;
+		CHKARG(configs, config, csc)
+		return sizeof(params->rgb2ycbcr);
+	case PREV_WB:
+		*param = &params->wbal;
+		CHKARG(configs, config, wbal)
+		return sizeof(params->wbal);
+	case PREV_GAMMA:
+		*param = &params->gamma;
+		CHKARG(configs, config, gamma)
+		return sizeof(params->gamma);
+	case PREV_CONTRAST:
+		*param = &params->contrast;
+		return 0;
+	case PREV_BRIGHTNESS:
+		*param = &params->brightness;
+		return 0;
+	default:
+		*param = NULL;
+		*config = NULL;
+		break;
+	}
+	return 0;
+}
+
+/*
+ * preview_config - Copy and update local structure with userspace preview
+ *                  configuration.
+ * @prev: ISP preview engine
+ * @cfg: Configuration
+ *
+ * Return zero if success or -EFAULT if the configuration can't be copied from
+ * userspace.
+ */
+static int preview_config(struct isp_prev_device *prev,
+			  struct omap3isp_prev_update_config *cfg)
+{
+	struct prev_params *params;
+	struct preview_update *attr;
+	int i, bit, rval = 0;
+
+	params = &prev->params;
+
+	if (prev->state != ISP_PIPELINE_STREAM_STOPPED) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&prev->lock, flags);
+		prev->shadow_update = 1;
+		spin_unlock_irqrestore(&prev->lock, flags);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+		attr = &update_attrs[i];
+		bit = 0;
+
+		if (!(cfg->update & attr->cfg_bit))
+			continue;
+
+		bit = cfg->flag & attr->cfg_bit;
+		if (bit) {
+			void *to = NULL, __user *from = NULL;
+			unsigned long sz = 0;
+
+			sz = __preview_get_ptrs(params, &to, cfg, &from,
+						   bit);
+			if (to && from && sz) {
+				if (copy_from_user(to, from, sz)) {
+					rval = -EFAULT;
+					break;
+				}
+			}
+			params->features |= attr->feature_bit;
+		} else {
+			params->features &= ~attr->feature_bit;
+		}
+
+		prev->update |= attr->feature_bit;
+	}
+
+	prev->shadow_update = 0;
+	return rval;
+}
+
+/*
+ * preview_setup_hw - Setup preview registers and/or internal memory
+ * @prev: pointer to preview private structure
+ * Note: can be called from interrupt context
+ * Return none
+ */
+static void preview_setup_hw(struct isp_prev_device *prev)
+{
+	struct prev_params *params = &prev->params;
+	struct preview_update *attr;
+	int i, bit;
+	void *param_ptr;
+
+	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+		attr = &update_attrs[i];
+
+		if (!(prev->update & attr->feature_bit))
+			continue;
+		bit = params->features & attr->feature_bit;
+		if (bit) {
+			if (attr->config) {
+				__preview_get_ptrs(params, &param_ptr, NULL,
+						      NULL, bit);
+				attr->config(prev, param_ptr);
+			}
+			if (attr->enable)
+				attr->enable(prev, 1);
+		} else
+			if (attr->enable)
+				attr->enable(prev, 0);
+
+		prev->update &= ~attr->feature_bit;
+	}
+}
+
+/*
+ * preview_config_ycpos - Configure byte layout of YUV image.
+ * @mode: Indicates the required byte layout.
+ */
+static void
+preview_config_ycpos(struct isp_prev_device *prev,
+		     enum v4l2_mbus_pixelcode pixelcode)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	enum preview_ycpos_mode mode;
+
+	switch (pixelcode) {
+	case V4L2_MBUS_FMT_YUYV8_1X16:
+		mode = YCPOS_CrYCbY;
+		break;
+	case V4L2_MBUS_FMT_UYVY8_1X16:
+		mode = YCPOS_YCrYCb;
+		break;
+	default:
+		return;
+	}
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_YCPOS_CrYCbY,
+			mode << ISPPRV_PCR_YCPOS_SHIFT);
+}
+
+/*
+ * preview_config_averager - Enable / disable / configure averager
+ * @average: Average value to be configured.
+ */
+static void preview_config_averager(struct isp_prev_device *prev, u8 average)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	int reg = 0;
+
+	if (prev->params.cfa.format == OMAP3ISP_CFAFMT_BAYER)
+		reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
+		      ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
+		      average;
+	else if (prev->params.cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON)
+		reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT |
+		      ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT |
+		      average;
+	isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
+}
+
+/*
+ * preview_config_input_size - Configure the input frame size
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which processing blocks are enabled. The driver assumes all those blocks are
+ * enabled when reporting source pad formats to userspace. If this assumption is
+ * not true, rows and columns must be manually cropped at the preview engine
+ * input to avoid overflows at the end of lines and frames.
+ */
+static void preview_config_input_size(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	struct prev_params *params = &prev->params;
+	struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
+	unsigned int sph = 0;
+	unsigned int eph = format->width - 1;
+	unsigned int slv = 0;
+	unsigned int elv = format->height - 1;
+
+	if (prev->input == PREVIEW_INPUT_CCDC) {
+		sph += 2;
+		eph -= 2;
+	}
+
+	/*
+	 * Median filter	4 pixels
+	 * Noise filter		4 pixels, 4 lines
+	 * or faulty pixels correction
+	 * CFA filter		4 pixels, 4 lines in Bayer mode
+	 *				  2 lines in other modes
+	 * Color suppression	2 pixels
+	 * or luma enhancement
+	 * -------------------------------------------------------------
+	 * Maximum total	14 pixels, 8 lines
+	 */
+
+	if (!(params->features & PREV_CFA)) {
+		sph += 2;
+		eph -= 2;
+		slv += 2;
+		elv -= 2;
+	}
+	if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) {
+		sph += 2;
+		eph -= 2;
+		slv += 2;
+		elv -= 2;
+	}
+	if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) {
+		sph += 2;
+		eph -= 2;
+	}
+	if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE)))
+		sph += 2;
+
+	isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
+	isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO);
+}
+
+/*
+ * preview_config_inlineoffset - Configures the Read address line offset.
+ * @prev: Preview module
+ * @offset: Line offset
+ *
+ * According to the TRM, the line offset must be aligned on a 32 bytes boundary.
+ * However, a hardware bug requires the memory start address to be aligned on a
+ * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as
+ * well.
+ */
+static void
+preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+		       ISPPRV_RADR_OFFSET);
+}
+
+/*
+ * preview_set_inaddr - Sets memory address of input frame.
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address from which the input frame is to be read.
+ */
+static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR);
+}
+
+/*
+ * preview_config_outlineoffset - Configures the Write address line offset.
+ * @offset: Line Offset for the preview output.
+ *
+ * The offset must be a multiple of 32 bytes.
+ */
+static void preview_config_outlineoffset(struct isp_prev_device *prev,
+				    u32 offset)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+		       ISPPRV_WADD_OFFSET);
+}
+
+/*
+ * preview_set_outaddr - Sets the memory address to store output frame
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address to which the output frame is written.
+ */
+static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR);
+}
+
+static void preview_adjust_bandwidth(struct isp_prev_device *prev)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+	struct isp_device *isp = to_isp_device(prev);
+	const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK];
+	unsigned long l3_ick = pipe->l3_ick;
+	struct v4l2_fract *timeperframe;
+	unsigned int cycles_per_frame;
+	unsigned int requests_per_frame;
+	unsigned int cycles_per_request;
+	unsigned int minimum;
+	unsigned int maximum;
+	unsigned int value;
+
+	if (prev->input != PREVIEW_INPUT_MEMORY) {
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			    ISPSBL_SDR_REQ_PRV_EXP_MASK);
+		return;
+	}
+
+	/* Compute the minimum number of cycles per request, based on the
+	 * pipeline maximum data rate. This is an absolute lower bound if we
+	 * don't want SBL overflows, so round the value up.
+	 */
+	cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
+				     pipe->max_rate);
+	minimum = DIV_ROUND_UP(cycles_per_request, 32);
+
+	/* Compute the maximum number of cycles per request, based on the
+	 * requested frame rate. This is a soft upper bound to achieve a frame
+	 * rate equal or higher than the requested value, so round the value
+	 * down.
+	 */
+	timeperframe = &pipe->max_timeperframe;
+
+	requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height;
+	cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
+				   timeperframe->denominator);
+	cycles_per_request = cycles_per_frame / requests_per_frame;
+
+	maximum = cycles_per_request / 32;
+
+	value = max(minimum, maximum);
+
+	dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			ISPSBL_SDR_REQ_PRV_EXP_MASK,
+			value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT);
+}
+
+/*
+ * omap3isp_preview_busy - Gets busy state of preview module.
+ */
+int omap3isp_preview_busy(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)
+		& ISPPRV_PCR_BUSY;
+}
+
+/*
+ * omap3isp_preview_restore_context - Restores the values of preview registers
+ */
+void omap3isp_preview_restore_context(struct isp_device *isp)
+{
+	isp->isp_prev.update = PREV_FEATURES_END - 1;
+	preview_setup_hw(&isp->isp_prev);
+}
+
+/*
+ * preview_print_status - Dump preview module registers to the kernel log
+ */
+#define PREV_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name))
+
+static void preview_print_status(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	dev_dbg(isp->dev, "-------------Preview Register dump----------\n");
+
+	PREV_PRINT_REGISTER(isp, PCR);
+	PREV_PRINT_REGISTER(isp, HORZ_INFO);
+	PREV_PRINT_REGISTER(isp, VERT_INFO);
+	PREV_PRINT_REGISTER(isp, RSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, RADR_OFFSET);
+	PREV_PRINT_REGISTER(isp, DSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, DRKF_OFFSET);
+	PREV_PRINT_REGISTER(isp, WSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, WADD_OFFSET);
+	PREV_PRINT_REGISTER(isp, AVE);
+	PREV_PRINT_REGISTER(isp, HMED);
+	PREV_PRINT_REGISTER(isp, NF);
+	PREV_PRINT_REGISTER(isp, WB_DGAIN);
+	PREV_PRINT_REGISTER(isp, WBGAIN);
+	PREV_PRINT_REGISTER(isp, WBSEL);
+	PREV_PRINT_REGISTER(isp, CFA);
+	PREV_PRINT_REGISTER(isp, BLKADJOFF);
+	PREV_PRINT_REGISTER(isp, RGB_MAT1);
+	PREV_PRINT_REGISTER(isp, RGB_MAT2);
+	PREV_PRINT_REGISTER(isp, RGB_MAT3);
+	PREV_PRINT_REGISTER(isp, RGB_MAT4);
+	PREV_PRINT_REGISTER(isp, RGB_MAT5);
+	PREV_PRINT_REGISTER(isp, RGB_OFF1);
+	PREV_PRINT_REGISTER(isp, RGB_OFF2);
+	PREV_PRINT_REGISTER(isp, CSC0);
+	PREV_PRINT_REGISTER(isp, CSC1);
+	PREV_PRINT_REGISTER(isp, CSC2);
+	PREV_PRINT_REGISTER(isp, CSC_OFFSET);
+	PREV_PRINT_REGISTER(isp, CNT_BRT);
+	PREV_PRINT_REGISTER(isp, CSUP);
+	PREV_PRINT_REGISTER(isp, SETUP_YC);
+	PREV_PRINT_REGISTER(isp, SET_TBL_ADDR);
+	PREV_PRINT_REGISTER(isp, CDC_THR0);
+	PREV_PRINT_REGISTER(isp, CDC_THR1);
+	PREV_PRINT_REGISTER(isp, CDC_THR2);
+	PREV_PRINT_REGISTER(isp, CDC_THR3);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * preview_init_params - init image processing parameters.
+ * @prev: pointer to previewer private structure
+ * return none
+ */
+static void preview_init_params(struct isp_prev_device *prev)
+{
+	struct prev_params *params = &prev->params;
+	int i = 0;
+
+	/* Init values */
+	params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
+	params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
+	params->average = NO_AVE;
+	params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
+	memcpy(params->cfa.table, cfa_coef_table,
+	       sizeof(params->cfa.table));
+	params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ;
+	params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT;
+	params->csup.gain = FLR_CSUP_GAIN;
+	params->csup.thres = FLR_CSUP_THRES;
+	params->csup.hypf_en = 0;
+	memcpy(params->luma.table, luma_enhance_table,
+	       sizeof(params->luma.table));
+	params->nf.spread = FLR_NF_STRGTH;
+	memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table));
+	params->dcor.couplet_mode_en = 1;
+	for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++)
+		params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL;
+	memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue));
+	memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green));
+	memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red));
+	params->wbal.dgain = FLR_WBAL_DGAIN;
+	params->wbal.coef0 = FLR_WBAL_COEF;
+	params->wbal.coef1 = FLR_WBAL_COEF;
+	params->wbal.coef2 = FLR_WBAL_COEF;
+	params->wbal.coef3 = FLR_WBAL_COEF;
+	params->blk_adj.red = FLR_BLKADJ_RED;
+	params->blk_adj.green = FLR_BLKADJ_GREEN;
+	params->blk_adj.blue = FLR_BLKADJ_BLUE;
+	params->rgb2rgb = flr_rgb2rgb;
+	params->rgb2ycbcr = flr_prev_csc;
+	params->yclimit.minC = ISPPRV_YC_MIN;
+	params->yclimit.maxC = ISPPRV_YC_MAX;
+	params->yclimit.minY = ISPPRV_YC_MIN;
+	params->yclimit.maxY = ISPPRV_YC_MAX;
+
+	params->features = PREV_CFA | PREV_DEFECT_COR | PREV_NOISE_FILTER
+			 | PREV_GAMMA | PREV_BLKADJ | PREV_YCLIMITS
+			 | PREV_RGB2RGB | PREV_COLOR_CONV | PREV_WB
+			 | PREV_BRIGHTNESS | PREV_CONTRAST;
+
+	prev->update = PREV_FEATURES_END - 1;
+}
+
+/*
+ * preview_max_out_width - Handle previewer hardware ouput limitations
+ * @isp_revision : ISP revision
+ * returns maximum width output for current isp revision
+ */
+static unsigned int preview_max_out_width(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	switch (isp->revision) {
+	case ISP_REVISION_1_0:
+		return ISPPRV_MAXOUTPUT_WIDTH;
+
+	case ISP_REVISION_2_0:
+	default:
+		return ISPPRV_MAXOUTPUT_WIDTH_ES2;
+
+	case ISP_REVISION_15_0:
+		return ISPPRV_MAXOUTPUT_WIDTH_3630;
+	}
+}
+
+static void preview_configure(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	struct v4l2_mbus_framefmt *format;
+	unsigned int max_out_width;
+	unsigned int format_avg;
+
+	preview_setup_hw(prev);
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SDRPORT);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SDRPORT);
+
+	if (prev->output & PREVIEW_OUTPUT_RESIZER)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_RSZPORT);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_RSZPORT);
+
+	/* PREV_PAD_SINK */
+	format = &prev->formats[PREV_PAD_SINK];
+
+	preview_adjust_bandwidth(prev);
+
+	preview_config_input_size(prev);
+
+	if (prev->input == PREVIEW_INPUT_CCDC)
+		preview_config_inlineoffset(prev, 0);
+	else
+		preview_config_inlineoffset(prev,
+				ALIGN(format->width, 0x20) * 2);
+
+	/* PREV_PAD_SOURCE */
+	format = &prev->formats[PREV_PAD_SOURCE];
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY)
+		preview_config_outlineoffset(prev,
+				ALIGN(format->width, 0x10) * 2);
+
+	max_out_width = preview_max_out_width(prev);
+
+	format_avg = fls(DIV_ROUND_UP(format->width, max_out_width) - 1);
+	preview_config_averager(prev, format_avg);
+	preview_config_ycpos(prev, format->code);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void preview_enable_oneshot(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	/* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE
+	 * bit is set. As the preview engine is used in single-shot mode, we
+	 * need to set PCR.SOURCE before enabling the preview engine.
+	 */
+	if (prev->input == PREVIEW_INPUT_MEMORY)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SOURCE);
+
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+		    ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT);
+}
+
+void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev)
+{
+	/*
+	 * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
+	 * condition, the module was paused and now we have a buffer queued
+	 * on the output again. Restart the pipeline if running in continuous
+	 * mode.
+	 */
+	if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
+	    prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
+		preview_enable_oneshot(prev);
+		isp_video_dmaqueue_flags_clr(&prev->video_out);
+	}
+}
+
+static void preview_isr_buffer(struct isp_prev_device *prev)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+	struct isp_buffer *buffer;
+	int restart = 0;
+
+	if (prev->input == PREVIEW_INPUT_MEMORY) {
+		buffer = omap3isp_video_buffer_next(&prev->video_in,
+						    prev->error);
+		if (buffer != NULL)
+			preview_set_inaddr(prev, buffer->isp_addr);
+		pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+	}
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY) {
+		buffer = omap3isp_video_buffer_next(&prev->video_out,
+						    prev->error);
+		if (buffer != NULL) {
+			preview_set_outaddr(prev, buffer->isp_addr);
+			restart = 1;
+		}
+		pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
+	}
+
+	switch (prev->state) {
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (isp_pipeline_ready(pipe))
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+		break;
+
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		/* If an underrun occurs, the video queue operation handler will
+		 * restart the preview engine. Otherwise restart it immediately.
+		 */
+		if (restart)
+			preview_enable_oneshot(prev);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+	default:
+		return;
+	}
+
+	prev->error = 0;
+}
+
+/*
+ * omap3isp_preview_isr - ISP preview engine interrupt handler
+ *
+ * Manage the preview engine video buffers and configure shadowed registers.
+ */
+void omap3isp_preview_isr(struct isp_prev_device *prev)
+{
+	unsigned long flags;
+
+	if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping))
+		return;
+
+	spin_lock_irqsave(&prev->lock, flags);
+	if (prev->shadow_update)
+		goto done;
+
+	preview_setup_hw(prev);
+	preview_config_input_size(prev);
+
+done:
+	spin_unlock_irqrestore(&prev->lock, flags);
+
+	if (prev->input == PREVIEW_INPUT_MEMORY ||
+	    prev->output & PREVIEW_OUTPUT_MEMORY)
+		preview_isr_buffer(prev);
+	else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS)
+		preview_enable_oneshot(prev);
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+static int preview_video_queue(struct isp_video *video,
+			       struct isp_buffer *buffer)
+{
+	struct isp_prev_device *prev = &video->isp->isp_prev;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		preview_set_inaddr(prev, buffer->isp_addr);
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		preview_set_outaddr(prev, buffer->isp_addr);
+
+	return 0;
+}
+
+static const struct isp_video_operations preview_video_ops = {
+	.queue = preview_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+/*
+ * preview_s_ctrl - Handle set control subdev method
+ * @ctrl: pointer to v4l2 control structure
+ */
+static int preview_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct isp_prev_device *prev =
+		container_of(ctrl->handler, struct isp_prev_device, ctrls);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		preview_update_brightness(prev, ctrl->val);
+		break;
+	case V4L2_CID_CONTRAST:
+		preview_update_contrast(prev, ctrl->val);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops preview_ctrl_ops = {
+	.s_ctrl = preview_s_ctrl,
+};
+
+/*
+ * preview_ioctl - Handle preview module private ioctl's
+ * @prev: pointer to preview context structure
+ * @cmd: configuration command
+ * @arg: configuration argument
+ * return -EINVAL or zero on success
+ */
+static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_PRV_CFG:
+		return preview_config(prev, arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+/*
+ * preview_set_stream - Enable/Disable streaming on preview subdev
+ * @sd    : pointer to v4l2 subdev structure
+ * @enable: 1 == Enable, 0 == Disable
+ * return -EINVAL or zero on sucess
+ */
+static int preview_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct isp_video *video_out = &prev->video_out;
+	struct isp_device *isp = to_isp_device(prev);
+	struct device *dev = to_device(prev);
+	unsigned long flags;
+
+	if (prev->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+
+		omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+		preview_configure(prev);
+		atomic_set(&prev->stopping, 0);
+		prev->error = 0;
+		preview_print_status(prev);
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (prev->output & PREVIEW_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+		if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED ||
+		    !(prev->output & PREVIEW_OUTPUT_MEMORY))
+			preview_enable_oneshot(prev);
+
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (prev->input == PREVIEW_INPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+		if (prev->output & PREVIEW_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+		preview_enable_oneshot(prev);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (omap3isp_module_sync_idle(&sd->entity, &prev->wait,
+					      &prev->stopping))
+			dev_dbg(dev, "%s: stop timeout.\n", sd->name);
+		spin_lock_irqsave(&prev->lock, flags);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+		omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+		spin_unlock_irqrestore(&prev->lock, flags);
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+	}
+
+	prev->state = enable;
+	return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+__preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+		     unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &prev->formats[pad];
+}
+
+/* previewer format descriptions */
+static const unsigned int preview_input_fmts[] = {
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SRGGB10_1X10,
+	V4L2_MBUS_FMT_SBGGR10_1X10,
+	V4L2_MBUS_FMT_SGBRG10_1X10,
+};
+
+static const unsigned int preview_output_fmts[] = {
+	V4L2_MBUS_FMT_UYVY8_1X16,
+	V4L2_MBUS_FMT_YUYV8_1X16,
+};
+
+/*
+ * preview_try_format - Handle try format by pad subdev method
+ * @prev: ISP preview device
+ * @fh : V4L2 subdev file handle
+ * @pad: pad num
+ * @fmt: pointer to v4l2 format structure
+ */
+static void preview_try_format(struct isp_prev_device *prev,
+			       struct v4l2_subdev_fh *fh, unsigned int pad,
+			       struct v4l2_mbus_framefmt *fmt,
+			       enum v4l2_subdev_format_whence which)
+{
+	struct v4l2_mbus_framefmt *format;
+	unsigned int max_out_width;
+	enum v4l2_mbus_pixelcode pixelcode;
+	unsigned int i;
+
+	max_out_width = preview_max_out_width(prev);
+
+	switch (pad) {
+	case PREV_PAD_SINK:
+		/* When reading data from the CCDC, the input size has already
+		 * been mangled by the CCDC output pad so it can be accepted
+		 * as-is.
+		 *
+		 * When reading data from memory, clamp the requested width and
+		 * height. The TRM doesn't specify a minimum input height, make
+		 * sure we got enough lines to enable the noise filter and color
+		 * filter array interpolation.
+		 */
+		if (prev->input == PREVIEW_INPUT_MEMORY) {
+			fmt->width = clamp_t(u32, fmt->width, PREV_MIN_WIDTH,
+					     max_out_width * 8);
+			fmt->height = clamp_t(u32, fmt->height, PREV_MIN_HEIGHT,
+					      PREV_MAX_HEIGHT);
+		}
+
+		fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+		for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) {
+			if (fmt->code == preview_input_fmts[i])
+				break;
+		}
+
+		/* If not found, use SGRBG10 as default */
+		if (i >= ARRAY_SIZE(preview_input_fmts))
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+		break;
+
+	case PREV_PAD_SOURCE:
+		pixelcode = fmt->code;
+		format = __preview_get_format(prev, fh, PREV_PAD_SINK, which);
+		memcpy(fmt, format, sizeof(*fmt));
+
+		/* The preview module output size is configurable through the
+		 * input interface (horizontal and vertical cropping) and the
+		 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In
+		 * spite of this, hardcode the output size to the biggest
+		 * possible value for simplicity reasons.
+		 */
+		switch (pixelcode) {
+		case V4L2_MBUS_FMT_YUYV8_1X16:
+		case V4L2_MBUS_FMT_UYVY8_1X16:
+			fmt->code = pixelcode;
+			break;
+
+		default:
+			fmt->code = V4L2_MBUS_FMT_YUYV8_1X16;
+			break;
+		}
+
+		/* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped
+		 * from the left and right sides when the input source is the
+		 * CCDC. This seems not to be needed in practice, investigation
+		 * is required.
+		 */
+		if (prev->input == PREVIEW_INPUT_CCDC)
+			fmt->width -= 4;
+
+		/* The preview module can output a maximum of 3312 pixels
+		 * horizontally due to fixed memory-line sizes. Compute the
+		 * horizontal averaging factor accordingly. Note that the limit
+		 * applies to the noise filter and CFA interpolation blocks, so
+		 * it doesn't take cropping by further blocks into account.
+		 *
+		 * ES 1.0 hardware revision is limited to 1280 pixels
+		 * horizontally.
+		 */
+		fmt->width >>= fls(DIV_ROUND_UP(fmt->width, max_out_width) - 1);
+
+		/* Assume that all blocks are enabled and crop pixels and lines
+		 * accordingly. See preview_config_input_size() for more
+		 * information.
+		 */
+		fmt->width -= 14;
+		fmt->height -= 8;
+
+		fmt->colorspace = V4L2_COLORSPACE_JPEG;
+		break;
+	}
+
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * preview_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int preview_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	switch (code->pad) {
+	case PREV_PAD_SINK:
+		if (code->index >= ARRAY_SIZE(preview_input_fmts))
+			return -EINVAL;
+
+		code->code = preview_input_fmts[code->index];
+		break;
+	case PREV_PAD_SOURCE:
+		if (code->index >= ARRAY_SIZE(preview_output_fmts))
+			return -EINVAL;
+
+		code->code = preview_output_fmts[code->index];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int preview_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * preview_get_format - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on sucess
+ */
+static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * preview_set_format - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	preview_try_format(prev, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == PREV_PAD_SINK) {
+		format = __preview_get_format(prev, fh, PREV_PAD_SOURCE,
+					      fmt->which);
+		*format = fmt->format;
+		preview_try_format(prev, fh, PREV_PAD_SOURCE, format,
+				   fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * preview_init_formats - Initialize formats on all pads
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int preview_init_formats(struct v4l2_subdev *sd,
+				struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = PREV_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	preview_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = {
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.ioctl = preview_ioctl,
+};
+
+/* subdev file operations */
+static const struct v4l2_subdev_file_ops preview_v4l2_file_ops = {
+	.open = preview_init_formats,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = {
+	.s_stream = preview_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = {
+	.enum_mbus_code = preview_enum_mbus_code,
+	.enum_frame_size = preview_enum_frame_size,
+	.get_fmt = preview_get_format,
+	.set_fmt = preview_set_format,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops preview_v4l2_ops = {
+	.core = &preview_v4l2_core_ops,
+	.file = &preview_v4l2_file_ops,
+	.video = &preview_v4l2_video_ops,
+	.pad = &preview_v4l2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * preview_link_setup - Setup previewer connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL or zero on success
+ */
+static int preview_link_setup(struct media_entity *entity,
+			      const struct media_pad *local,
+			      const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case PREV_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+		/* read from memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->input == PREVIEW_INPUT_CCDC)
+				return -EBUSY;
+			prev->input = PREVIEW_INPUT_MEMORY;
+		} else {
+			if (prev->input == PREVIEW_INPUT_MEMORY)
+				prev->input = PREVIEW_INPUT_NONE;
+		}
+		break;
+
+	case PREV_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* read from ccdc */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->input == PREVIEW_INPUT_MEMORY)
+				return -EBUSY;
+			prev->input = PREVIEW_INPUT_CCDC;
+		} else {
+			if (prev->input == PREVIEW_INPUT_CCDC)
+				prev->input = PREVIEW_INPUT_NONE;
+		}
+		break;
+
+	/*
+	 * The ISP core doesn't support pipelines with multiple video outputs.
+	 * Revisit this when it will be implemented, and return -EBUSY for now.
+	 */
+
+	case PREV_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+		/* write to memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
+				return -EBUSY;
+			prev->output |= PREVIEW_OUTPUT_MEMORY;
+		} else {
+			prev->output &= ~PREVIEW_OUTPUT_MEMORY;
+		}
+		break;
+
+	case PREV_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* write to resizer */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
+				return -EBUSY;
+			prev->output |= PREVIEW_OUTPUT_RESIZER;
+		} else {
+			prev->output &= ~PREVIEW_OUTPUT_RESIZER;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations preview_media_ops = {
+	.link_setup = preview_link_setup,
+};
+
+/*
+ * review_init_entities - Initialize subdev and media entity.
+ * @prev : Pointer to preview structure
+ * return -ENOMEM or zero on success
+ */
+static int preview_init_entities(struct isp_prev_device *prev)
+{
+	struct v4l2_subdev *sd = &prev->subdev;
+	struct media_pad *pads = prev->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	prev->input = PREVIEW_INPUT_NONE;
+
+	v4l2_subdev_init(sd, &preview_v4l2_ops);
+	strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name));
+	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, prev);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	v4l2_ctrl_handler_init(&prev->ctrls, 3);
+	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS,
+			  ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH,
+			  ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF);
+	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST,
+			  ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH,
+			  ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF);
+	v4l2_ctrl_handler_setup(&prev->ctrls);
+	sd->ctrl_handler = &prev->ctrls;
+
+	pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_INPUT;
+	pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_OUTPUT;
+
+	me->ops = &preview_media_ops;
+	ret = media_entity_init(me, PREV_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	preview_init_formats(sd, NULL);
+
+	/* According to the OMAP34xx TRM, video buffers need to be aligned on a
+	 * 32 bytes boundary. However, an undocumented hardware bug requires a
+	 * 64 bytes boundary at the preview engine input.
+	 */
+	prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	prev->video_in.ops = &preview_video_ops;
+	prev->video_in.isp = to_isp_device(prev);
+	prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	prev->video_in.bpl_alignment = 64;
+	prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	prev->video_out.ops = &preview_video_ops;
+	prev->video_out.isp = to_isp_device(prev);
+	prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	prev->video_out.bpl_alignment = 32;
+
+	ret = omap3isp_video_init(&prev->video_in, "preview");
+	if (ret < 0)
+		return ret;
+
+	ret = omap3isp_video_init(&prev->video_out, "preview");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the video nodes to the previewer subdev. */
+	ret = media_entity_create_link(&prev->video_in.video.entity, 0,
+			&prev->subdev.entity, PREV_PAD_SINK, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE,
+			&prev->video_out.video.entity, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
+{
+	media_entity_cleanup(&prev->subdev.entity);
+
+	v4l2_device_unregister_subdev(&prev->subdev);
+	v4l2_ctrl_handler_free(&prev->ctrls);
+	omap3isp_video_unregister(&prev->video_in);
+	omap3isp_video_unregister(&prev->video_out);
+}
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prev,
+	struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_preview_unregister_entities(prev);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP previewer initialisation and cleanup
+ */
+
+void omap3isp_preview_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * isp_preview_init - Previewer initialization.
+ * @dev : Pointer to ISP device
+ * return -ENOMEM or zero on success
+ */
+int omap3isp_preview_init(struct isp_device *isp)
+{
+	struct isp_prev_device *prev = &isp->isp_prev;
+	int ret;
+
+	spin_lock_init(&prev->lock);
+	init_waitqueue_head(&prev->wait);
+	preview_init_params(prev);
+
+	ret = preview_init_entities(prev);
+	if (ret < 0)
+		goto out;
+
+out:
+	if (ret)
+		omap3isp_preview_cleanup(isp);
+
+	return ret;
+}
diff --git a/drivers/media/video/isp/isppreview.h b/drivers/media/video/isp/isppreview.h
new file mode 100644
index 0000000..e20c7c6
--- /dev/null
+++ b/drivers/media/video/isp/isppreview.h
@@ -0,0 +1,214 @@
+/*
+ * isppreview.h
+ *
+ * TI OMAP3 ISP - Preview module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_PREVIEW_H
+#define OMAP3_ISP_PREVIEW_H
+
+#include <linux/omap3isp.h>
+#include <linux/types.h>
+#include <media/v4l2-ctrls.h>
+
+#include "ispvideo.h"
+
+#define ISPPRV_BRIGHT_STEP		0x1
+#define ISPPRV_BRIGHT_DEF		0x0
+#define ISPPRV_BRIGHT_LOW		0x0
+#define ISPPRV_BRIGHT_HIGH		0xFF
+#define ISPPRV_BRIGHT_UNITS		0x1
+
+#define ISPPRV_CONTRAST_STEP		0x1
+#define ISPPRV_CONTRAST_DEF		0x10
+#define ISPPRV_CONTRAST_LOW		0x0
+#define ISPPRV_CONTRAST_HIGH		0xFF
+#define ISPPRV_CONTRAST_UNITS		0x1
+
+#define NO_AVE				0x0
+#define AVE_2_PIX			0x1
+#define AVE_4_PIX			0x2
+#define AVE_8_PIX			0x3
+
+/* Features list */
+#define PREV_LUMA_ENHANCE		OMAP3ISP_PREV_LUMAENH
+#define PREV_INVERSE_ALAW		OMAP3ISP_PREV_INVALAW
+#define PREV_HORZ_MEDIAN_FILTER		OMAP3ISP_PREV_HRZ_MED
+#define PREV_CFA			OMAP3ISP_PREV_CFA
+#define PREV_CHROMA_SUPPRESS		OMAP3ISP_PREV_CHROMA_SUPP
+#define PREV_WB				OMAP3ISP_PREV_WB
+#define PREV_BLKADJ			OMAP3ISP_PREV_BLKADJ
+#define PREV_RGB2RGB			OMAP3ISP_PREV_RGB2RGB
+#define PREV_COLOR_CONV			OMAP3ISP_PREV_COLOR_CONV
+#define PREV_YCLIMITS			OMAP3ISP_PREV_YC_LIMIT
+#define PREV_DEFECT_COR			OMAP3ISP_PREV_DEFECT_COR
+#define PREV_GAMMA_BYPASS		OMAP3ISP_PREV_GAMMABYPASS
+#define PREV_DARK_FRAME_CAPTURE		OMAP3ISP_PREV_DRK_FRM_CAPTURE
+#define PREV_DARK_FRAME_SUBTRACT	OMAP3ISP_PREV_DRK_FRM_SUBTRACT
+#define PREV_LENS_SHADING		OMAP3ISP_PREV_LENS_SHADING
+#define PREV_NOISE_FILTER		OMAP3ISP_PREV_NF
+#define PREV_GAMMA			OMAP3ISP_PREV_GAMMA
+
+#define PREV_CONTRAST			(1 << 17)
+#define PREV_BRIGHTNESS			(1 << 18)
+#define PREV_AVERAGER			(1 << 19)
+#define PREV_FEATURES_END		(1 << 20)
+
+enum preview_input_entity {
+	PREVIEW_INPUT_NONE,
+	PREVIEW_INPUT_CCDC,
+	PREVIEW_INPUT_MEMORY,
+};
+
+#define PREVIEW_OUTPUT_RESIZER		(1 << 1)
+#define PREVIEW_OUTPUT_MEMORY		(1 << 2)
+
+/* Configure byte layout of YUV image */
+enum preview_ycpos_mode {
+	YCPOS_YCrYCb = 0,
+	YCPOS_YCbYCr = 1,
+	YCPOS_CbYCrY = 2,
+	YCPOS_CrYCbY = 3
+};
+
+/*
+ * struct prev_params - Structure for all configuration
+ * @features: Set of features enabled.
+ * @cfa: CFA coefficients.
+ * @csup: Chroma suppression coefficients.
+ * @luma: Luma enhancement coefficients.
+ * @nf: Noise filter coefficients.
+ * @dcor: Noise filter coefficients.
+ * @gamma: Gamma coefficients.
+ * @wbal: White Balance parameters.
+ * @blk_adj: Black adjustment parameters.
+ * @rgb2rgb: RGB blending parameters.
+ * @rgb2ycbcr: RGB to ycbcr parameters.
+ * @hmed: Horizontal median filter.
+ * @yclimit: YC limits parameters.
+ * @average: Downsampling rate for averager.
+ * @contrast: Contrast.
+ * @brightness: Brightness.
+ */
+struct prev_params {
+	u32 features;
+	struct omap3isp_prev_cfa cfa;
+	struct omap3isp_prev_csup csup;
+	struct omap3isp_prev_luma luma;
+	struct omap3isp_prev_nf nf;
+	struct omap3isp_prev_dcor dcor;
+	struct omap3isp_prev_gtables gamma;
+	struct omap3isp_prev_wbal wbal;
+	struct omap3isp_prev_blkadj blk_adj;
+	struct omap3isp_prev_rgbtorgb rgb2rgb;
+	struct omap3isp_prev_csc rgb2ycbcr;
+	struct omap3isp_prev_hmed hmed;
+	struct omap3isp_prev_yclimit yclimit;
+	u8 average;
+	u8 contrast;
+	u8 brightness;
+};
+
+/*
+ * struct isptables_update - Structure for Table Configuration.
+ * @update: Specifies which tables should be updated.
+ * @flag: Specifies which tables should be enabled.
+ * @nf: Pointer to structure for Noise Filter
+ * @lsc: Pointer to LSC gain table. (currently not used)
+ * @gamma: Pointer to gamma correction tables.
+ * @cfa: Pointer to color filter array configuration.
+ * @wbal: Pointer to colour and digital gain configuration.
+ */
+struct isptables_update {
+	u32 update;
+	u32 flag;
+	struct omap3isp_prev_nf *nf;
+	u32 *lsc;
+	struct omap3isp_prev_gtables *gamma;
+	struct omap3isp_prev_cfa *cfa;
+	struct omap3isp_prev_wbal *wbal;
+};
+
+/* Sink and source previewer pads */
+#define PREV_PAD_SINK			0
+#define PREV_PAD_SOURCE			1
+#define PREV_PADS_NUM			2
+
+/*
+ * struct isp_prev_device - Structure for storing ISP Preview module information
+ * @subdev: V4L2 subdevice
+ * @pads: Media entity pads
+ * @formats: Active formats at the subdev pad
+ * @input: Module currently connected to the input pad
+ * @output: Bitmask of the active output
+ * @video_in: Input video entity
+ * @video_out: Output video entity
+ * @error: A hardware error occured during capture
+ * @params: Module configuration data
+ * @shadow_update: If set, update the hardware configured in the next interrupt
+ * @underrun: Whether the preview entity has queued buffers on the output
+ * @state: Current preview pipeline state
+ * @lock: Shadow update lock
+ * @update: Bitmask of the parameters to be updated
+ *
+ * This structure is used to store the OMAP ISP Preview module Information.
+ */
+struct isp_prev_device {
+	struct v4l2_subdev subdev;
+	struct media_pad pads[PREV_PADS_NUM];
+	struct v4l2_mbus_framefmt formats[PREV_PADS_NUM];
+
+	struct v4l2_ctrl_handler ctrls;
+
+	enum preview_input_entity input;
+	unsigned int output;
+	struct isp_video video_in;
+	struct isp_video video_out;
+	unsigned int error;
+
+	struct prev_params params;
+	unsigned int shadow_update:1;
+	enum isp_pipeline_stream_state state;
+	wait_queue_head_t wait;
+	atomic_t stopping;
+	spinlock_t lock;
+	u32 update;
+};
+
+struct isp_device;
+
+int omap3isp_preview_init(struct isp_device *isp);
+void omap3isp_preview_cleanup(struct isp_device *isp);
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prv,
+				       struct v4l2_device *vdev);
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prv);
+
+void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev);
+void omap3isp_preview_isr(struct isp_prev_device *prev);
+
+int omap3isp_preview_busy(struct isp_prev_device *isp_prev);
+
+void omap3isp_preview_restore_context(struct isp_device *isp);
+
+#endif	/* OMAP3_ISP_PREVIEW_H */
diff --git a/drivers/media/video/isp/ispqueue.c b/drivers/media/video/isp/ispqueue.c
new file mode 100644
index 0000000..af78c19
--- /dev/null
+++ b/drivers/media/video/isp/ispqueue.c
@@ -0,0 +1,1136 @@
+/*
+ * ispqueue.c
+ *
+ * TI OMAP3 ISP - Video buffers queue handling
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/poll.h>
+#include <linux/scatterlist.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include "ispqueue.h"
+
+/* -----------------------------------------------------------------------------
+ * Video buffers management
+ */
+
+/*
+ * isp_video_buffer_cache_sync - Keep the buffers coherent between CPU and ISP
+ *
+ * The typical operation required here is Cache Invalidation across
+ * the (user space) buffer address range. And this _must_ be done
+ * at QBUF stage (and *only* at QBUF).
+ *
+ * We try to use optimal cache invalidation function:
+ * - dmac_map_area:
+ *    - used when the number of pages are _low_.
+ *    - it becomes quite slow as the number of pages increase.
+ *       - for 648x492 viewfinder (150 pages) it takes 1.3 ms.
+ *       - for 5 Mpix buffer (2491 pages) it takes between 25-50 ms.
+ *
+ * - flush_cache_all:
+ *    - used when the number of pages are _high_.
+ *    - time taken in the range of 500-900 us.
+ *    - has a higher penalty but, as whole dcache + icache is invalidated
+ */
+/*
+ * FIXME: dmac_inv_range crashes randomly on the user space buffer
+ *        address. Fall back to flush_cache_all for now.
+ */
+#define ISP_CACHE_FLUSH_PAGES_MAX       0
+
+static void isp_video_buffer_cache_sync(struct isp_video_buffer *buf)
+{
+	if (buf->vbuf.m.userptr == 0 || buf->npages == 0 ||
+	    buf->npages > ISP_CACHE_FLUSH_PAGES_MAX)
+		flush_cache_all();
+	else {
+		dmac_map_area((void *)buf->vbuf.m.userptr, buf->vbuf.length,
+			      DMA_FROM_DEVICE);
+		outer_inv_range(buf->vbuf.m.userptr,
+				buf->vbuf.m.userptr + buf->vbuf.length);
+	}
+}
+
+/*
+ * isp_video_buffer_lock_vma - Prevent VMAs from being unmapped
+ *
+ * Lock the VMAs underlying the given buffer into memory. This avoids the
+ * userspace buffer mapping from being swapped out, making VIPT cache handling
+ * easier.
+ *
+ * Note that the pages will not be freed as the buffers have been locked to
+ * memory using by a call to get_user_pages(), but the userspace mapping could
+ * still disappear if the VMAs are not locked. This is caused by the memory
+ * management code trying to be as lock-less as possible, which results in the
+ * userspace mapping manager not finding out that the pages are locked under
+ * some conditions.
+ */
+static int isp_video_buffer_lock_vma(struct isp_video_buffer *buf, int lock)
+{
+	struct vm_area_struct *vma;
+	unsigned long start;
+	unsigned long end;
+	int ret = 0;
+
+	if (buf->vbuf.memory == V4L2_MEMORY_MMAP)
+		return 0;
+
+	/* We can be called from workqueue context if the current task dies to
+	 * unlock the VMAs. In that case there's no current memory management
+	 * context so unlocking can't be performed, but the VMAs have been or
+	 * are getting destroyed anyway so it doesn't really matter.
+	 */
+	if (!current || !current->mm)
+		return lock ? -EINVAL : 0;
+
+	start = buf->vbuf.m.userptr;
+	end = buf->vbuf.m.userptr + buf->vbuf.length - 1;
+
+	down_write(&current->mm->mmap_sem);
+	spin_lock(&current->mm->page_table_lock);
+
+	do {
+		vma = find_vma(current->mm, start);
+		if (vma == NULL) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		if (lock)
+			vma->vm_flags |= VM_LOCKED;
+		else
+			vma->vm_flags &= ~VM_LOCKED;
+
+		start = vma->vm_end + 1;
+	} while (vma->vm_end < end);
+
+	if (lock)
+		buf->vm_flags |= VM_LOCKED;
+	else
+		buf->vm_flags &= ~VM_LOCKED;
+
+out:
+	spin_unlock(&current->mm->page_table_lock);
+	up_write(&current->mm->mmap_sem);
+	return ret;
+}
+
+/*
+ * isp_video_buffer_sglist_kernel - Build a scatter list for a vmalloc'ed buffer
+ *
+ * Iterate over the vmalloc'ed area and create a scatter list entry for every
+ * page.
+ */
+static int isp_video_buffer_sglist_kernel(struct isp_video_buffer *buf)
+{
+	struct scatterlist *sglist;
+	unsigned int npages;
+	unsigned int i;
+	void *addr;
+
+	addr = buf->vaddr;
+	npages = PAGE_ALIGN(buf->vbuf.length) >> PAGE_SHIFT;
+
+	sglist = vmalloc(npages * sizeof(*sglist));
+	if (sglist == NULL)
+		return -ENOMEM;
+
+	sg_init_table(sglist, npages);
+
+	for (i = 0; i < npages; ++i, addr += PAGE_SIZE) {
+		struct page *page = vmalloc_to_page(addr);
+
+		if (page == NULL || PageHighMem(page)) {
+			vfree(sglist);
+			return -EINVAL;
+		}
+
+		sg_set_page(&sglist[i], page, PAGE_SIZE, 0);
+	}
+
+	buf->sglen = npages;
+	buf->sglist = sglist;
+
+	return 0;
+}
+
+/*
+ * isp_video_buffer_sglist_user - Build a scatter list for a userspace buffer
+ *
+ * Walk the buffer pages list and create a 1:1 mapping to a scatter list.
+ */
+static int isp_video_buffer_sglist_user(struct isp_video_buffer *buf)
+{
+	struct scatterlist *sglist;
+	unsigned int offset = buf->offset;
+	unsigned int i;
+
+	sglist = vmalloc(buf->npages * sizeof(*sglist));
+	if (sglist == NULL)
+		return -ENOMEM;
+
+	sg_init_table(sglist, buf->npages);
+
+	for (i = 0; i < buf->npages; ++i) {
+		if (PageHighMem(buf->pages[i])) {
+			vfree(sglist);
+			return -EINVAL;
+		}
+
+		sg_set_page(&sglist[i], buf->pages[i], PAGE_SIZE - offset,
+			    offset);
+		offset = 0;
+	}
+
+	buf->sglen = buf->npages;
+	buf->sglist = sglist;
+
+	return 0;
+}
+
+/*
+ * isp_video_buffer_sglist_pfnmap - Build a scatter list for a VM_PFNMAP buffer
+ *
+ * Create a scatter list of physically contiguous pages starting at the buffer
+ * memory physical address.
+ */
+static int isp_video_buffer_sglist_pfnmap(struct isp_video_buffer *buf)
+{
+	struct scatterlist *sglist;
+	unsigned int offset = buf->offset;
+	unsigned long pfn = buf->paddr >> PAGE_SHIFT;
+	unsigned int i;
+
+	sglist = vmalloc(buf->npages * sizeof(*sglist));
+	if (sglist == NULL)
+		return -ENOMEM;
+
+	sg_init_table(sglist, buf->npages);
+
+	for (i = 0; i < buf->npages; ++i, ++pfn) {
+		sg_set_page(&sglist[i], pfn_to_page(pfn), PAGE_SIZE - offset,
+			    offset);
+		/* PFNMAP buffers will not get DMA-mapped, set the DMA address
+		 * manually.
+		 */
+		sg_dma_address(&sglist[i]) = (pfn << PAGE_SHIFT) + offset;
+		offset = 0;
+	}
+
+	buf->sglen = buf->npages;
+	buf->sglist = sglist;
+
+	return 0;
+}
+
+/*
+ * isp_video_buffer_cleanup - Release pages for a userspace VMA.
+ *
+ * Release pages locked by a call isp_video_buffer_prepare_user and free the
+ * pages table.
+ */
+static void isp_video_buffer_cleanup(struct isp_video_buffer *buf)
+{
+	enum dma_data_direction direction;
+	unsigned int i;
+
+	if (buf->queue->ops->buffer_cleanup)
+		buf->queue->ops->buffer_cleanup(buf);
+
+	if (!(buf->vm_flags & VM_PFNMAP)) {
+		direction = buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE
+			  ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+		dma_unmap_sg(buf->queue->dev, buf->sglist, buf->sglen,
+			     direction);
+	}
+
+	vfree(buf->sglist);
+	buf->sglist = NULL;
+	buf->sglen = 0;
+
+	if (buf->pages != NULL) {
+		isp_video_buffer_lock_vma(buf, 0);
+
+		for (i = 0; i < buf->npages; ++i)
+			page_cache_release(buf->pages[i]);
+
+		vfree(buf->pages);
+		buf->pages = NULL;
+	}
+
+	buf->npages = 0;
+}
+
+/*
+ * isp_video_buffer_prepare_user - Pin userspace VMA pages to memory.
+ *
+ * This function creates a list of pages for a userspace VMA. The number of
+ * pages is first computed based on the buffer size, and pages are then
+ * retrieved by a call to get_user_pages.
+ *
+ * Pages are pinned to memory by get_user_pages, making them available for DMA
+ * transfers. However, due to memory management optimization, it seems the
+ * get_user_pages doesn't guarantee that the pinned pages will not be written
+ * to swap and removed from the userspace mapping(s). When this happens, a page
+ * fault can be generated when accessing those unmapped pages.
+ *
+ * If the fault is triggered by a page table walk caused by VIPT cache
+ * management operations, the page fault handler might oops if the MM semaphore
+ * is held, as it can't handle kernel page faults in that case. To fix that, a
+ * fixup entry needs to be added to the cache management code, or the userspace
+ * VMA must be locked to avoid removing pages from the userspace mapping in the
+ * first place.
+ *
+ * If the number of pages retrieved is smaller than the number required by the
+ * buffer size, the function returns -EFAULT.
+ */
+static int isp_video_buffer_prepare_user(struct isp_video_buffer *buf)
+{
+	unsigned long data;
+	unsigned int first;
+	unsigned int last;
+	int ret;
+
+	data = buf->vbuf.m.userptr;
+	first = (data & PAGE_MASK) >> PAGE_SHIFT;
+	last = ((data + buf->vbuf.length - 1) & PAGE_MASK) >> PAGE_SHIFT;
+
+	buf->offset = data & ~PAGE_MASK;
+	buf->npages = last - first + 1;
+	buf->pages = vmalloc(buf->npages * sizeof(buf->pages[0]));
+	if (buf->pages == NULL)
+		return -ENOMEM;
+
+	down_read(&current->mm->mmap_sem);
+	ret = get_user_pages(current, current->mm, data & PAGE_MASK,
+			     buf->npages,
+			     buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE, 0,
+			     buf->pages, NULL);
+	up_read(&current->mm->mmap_sem);
+
+	if (ret != buf->npages) {
+		buf->npages = ret;
+		isp_video_buffer_cleanup(buf);
+		return -EFAULT;
+	}
+
+	ret = isp_video_buffer_lock_vma(buf, 1);
+	if (ret < 0)
+		isp_video_buffer_cleanup(buf);
+
+	return ret;
+}
+
+/*
+ * isp_video_buffer_prepare_pfnmap - Validate a VM_PFNMAP userspace buffer
+ *
+ * Userspace VM_PFNMAP buffers are supported only if they are contiguous in
+ * memory and if they span a single VMA.
+ *
+ * Return 0 if the buffer is valid, or -EFAULT otherwise.
+ */
+static int isp_video_buffer_prepare_pfnmap(struct isp_video_buffer *buf)
+{
+	struct vm_area_struct *vma;
+	unsigned long prev_pfn;
+	unsigned long this_pfn;
+	unsigned long start;
+	unsigned long end;
+	dma_addr_t pa;
+	int ret = -EFAULT;
+
+	start = buf->vbuf.m.userptr;
+	end = buf->vbuf.m.userptr + buf->vbuf.length - 1;
+
+	buf->offset = start & ~PAGE_MASK;
+	buf->npages = (end >> PAGE_SHIFT) - (start >> PAGE_SHIFT) + 1;
+	buf->pages = NULL;
+
+	down_read(&current->mm->mmap_sem);
+	vma = find_vma(current->mm, start);
+	if (vma == NULL || vma->vm_end < end)
+		goto done;
+
+	for (prev_pfn = 0; start <= end; start += PAGE_SIZE) {
+		ret = follow_pfn(vma, start, &this_pfn);
+		if (ret)
+			goto done;
+
+		if (prev_pfn == 0)
+			pa = this_pfn << PAGE_SHIFT;
+		else if (this_pfn != prev_pfn + 1) {
+			ret = -EFAULT;
+			goto done;
+		}
+
+		prev_pfn = this_pfn;
+	}
+
+	buf->paddr = pa + buf->offset;
+	ret = 0;
+
+done:
+	up_read(&current->mm->mmap_sem);
+	return ret;
+}
+
+/*
+ * isp_video_buffer_prepare_vm_flags - Get VMA flags for a userspace address
+ *
+ * This function locates the VMAs for the buffer's userspace address and checks
+ * that their flags match. The onlflag that we need to care for at the moment is
+ * VM_PFNMAP.
+ *
+ * The buffer vm_flags field is set to the first VMA flags.
+ *
+ * Return -EFAULT if no VMA can be found for part of the buffer, or if the VMAs
+ * have incompatible flags.
+ */
+static int isp_video_buffer_prepare_vm_flags(struct isp_video_buffer *buf)
+{
+	struct vm_area_struct *vma;
+	unsigned long start;
+	unsigned long end;
+	int ret = -EFAULT;
+
+	start = buf->vbuf.m.userptr;
+	end = buf->vbuf.m.userptr + buf->vbuf.length - 1;
+
+	down_read(&current->mm->mmap_sem);
+
+	do {
+		vma = find_vma(current->mm, start);
+		if (vma == NULL)
+			goto done;
+
+		if (start == buf->vbuf.m.userptr)
+			buf->vm_flags = vma->vm_flags;
+
+		if ((buf->vm_flags ^ vma->vm_flags) & VM_PFNMAP)
+			goto done;
+
+		start = vma->vm_end + 1;
+	} while (vma->vm_end < end);
+
+	ret = 0;
+
+done:
+	up_read(&current->mm->mmap_sem);
+	return ret;
+}
+
+/*
+ * isp_video_buffer_prepare - Make a buffer ready for operation
+ *
+ * Preparing a buffer involves:
+ *
+ * - validating VMAs (userspace buffers only)
+ * - locking pages and VMAs into memory (userspace buffers only)
+ * - building page and scatter-gather lists
+ * - mapping buffers for DMA operation
+ * - performing driver-specific preparation
+ *
+ * The function must be called in userspace context with a valid mm context
+ * (this excludes cleanup paths such as sys_close when the userspace process
+ * segfaults).
+ */
+static int isp_video_buffer_prepare(struct isp_video_buffer *buf)
+{
+	enum dma_data_direction direction;
+	int ret;
+
+	switch (buf->vbuf.memory) {
+	case V4L2_MEMORY_MMAP:
+		ret = isp_video_buffer_sglist_kernel(buf);
+		break;
+
+	case V4L2_MEMORY_USERPTR:
+		ret = isp_video_buffer_prepare_vm_flags(buf);
+		if (ret < 0)
+			return ret;
+
+		if (buf->vm_flags & VM_PFNMAP) {
+			ret = isp_video_buffer_prepare_pfnmap(buf);
+			if (ret < 0)
+				return ret;
+
+			ret = isp_video_buffer_sglist_pfnmap(buf);
+		} else {
+			ret = isp_video_buffer_prepare_user(buf);
+			if (ret < 0)
+				return ret;
+
+			ret = isp_video_buffer_sglist_user(buf);
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (ret < 0)
+		goto done;
+
+	if (!(buf->vm_flags & VM_PFNMAP)) {
+		direction = buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE
+			  ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+		ret = dma_map_sg(buf->queue->dev, buf->sglist, buf->sglen,
+				 direction);
+		if (ret != buf->sglen) {
+			ret = -EFAULT;
+			goto done;
+		}
+	}
+
+	if (buf->queue->ops->buffer_prepare)
+		ret = buf->queue->ops->buffer_prepare(buf);
+
+done:
+	if (ret < 0) {
+		isp_video_buffer_cleanup(buf);
+		return ret;
+	}
+
+	return ret;
+}
+
+/*
+ * isp_video_queue_query - Query the status of a given buffer
+ *
+ * Locking: must be called with the queue lock held.
+ */
+static void isp_video_buffer_query(struct isp_video_buffer *buf,
+				   struct v4l2_buffer *vbuf)
+{
+	memcpy(vbuf, &buf->vbuf, sizeof(*vbuf));
+
+	if (buf->vma_use_count)
+		vbuf->flags |= V4L2_BUF_FLAG_MAPPED;
+
+	switch (buf->state) {
+	case ISP_BUF_STATE_ERROR:
+		vbuf->flags |= V4L2_BUF_FLAG_ERROR;
+	case ISP_BUF_STATE_DONE:
+		vbuf->flags |= V4L2_BUF_FLAG_DONE;
+	case ISP_BUF_STATE_QUEUED:
+	case ISP_BUF_STATE_ACTIVE:
+		vbuf->flags |= V4L2_BUF_FLAG_QUEUED;
+		break;
+	case ISP_BUF_STATE_IDLE:
+	default:
+		break;
+	}
+}
+
+/*
+ * isp_video_buffer_wait - Wait for a buffer to be ready
+ *
+ * In non-blocking mode, return immediately with 0 if the buffer is ready or
+ * -EAGAIN if the buffer is in the QUEUED or ACTIVE state.
+ *
+ * In blocking mode, wait (interruptibly but with no timeout) on the buffer wait
+ * queue using the same condition.
+ */
+static int isp_video_buffer_wait(struct isp_video_buffer *buf, int nonblocking)
+{
+	if (nonblocking) {
+		return (buf->state != ISP_BUF_STATE_QUEUED &&
+			buf->state != ISP_BUF_STATE_ACTIVE)
+			? 0 : -EAGAIN;
+	}
+
+	return wait_event_interruptible(buf->wait,
+		buf->state != ISP_BUF_STATE_QUEUED &&
+		buf->state != ISP_BUF_STATE_ACTIVE);
+}
+
+/* -----------------------------------------------------------------------------
+ * Queue management
+ */
+
+/*
+ * isp_video_queue_free - Free video buffers memory
+ *
+ * Buffers can only be freed if the queue isn't streaming and if no buffer is
+ * mapped to userspace. Return -EBUSY if those conditions aren't statisfied.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int isp_video_queue_free(struct isp_video_queue *queue)
+{
+	unsigned int i;
+
+	if (queue->streaming)
+		return -EBUSY;
+
+	for (i = 0; i < queue->count; ++i) {
+		if (queue->buffers[i]->vma_use_count != 0)
+			return -EBUSY;
+	}
+
+	for (i = 0; i < queue->count; ++i) {
+		struct isp_video_buffer *buf = queue->buffers[i];
+
+		isp_video_buffer_cleanup(buf);
+
+		vfree(buf->vaddr);
+		buf->vaddr = NULL;
+
+		kfree(buf);
+		queue->buffers[i] = NULL;
+	}
+
+	INIT_LIST_HEAD(&queue->queue);
+	queue->count = 0;
+	return 0;
+}
+
+/*
+ * isp_video_queue_alloc - Allocate video buffers memory
+ *
+ * This function must be called with the queue lock held.
+ */
+static int isp_video_queue_alloc(struct isp_video_queue *queue,
+				 unsigned int nbuffers,
+				 unsigned int size, enum v4l2_memory memory)
+{
+	struct isp_video_buffer *buf;
+	unsigned int i;
+	void *mem;
+	int ret;
+
+	/* Start by freeing the buffers. */
+	ret = isp_video_queue_free(queue);
+	if (ret < 0)
+		return ret;
+
+	/* Bail out of no buffers should be allocated. */
+	if (nbuffers == 0)
+		return 0;
+
+	/* Initialize the allocated buffers. */
+	for (i = 0; i < nbuffers; ++i) {
+		buf = kzalloc(queue->bufsize, GFP_KERNEL);
+		if (buf == NULL)
+			break;
+
+		if (memory == V4L2_MEMORY_MMAP) {
+			/* Allocate video buffers memory for mmap mode. Align
+			 * the size to the page size.
+			 */
+			mem = vmalloc_32_user(PAGE_ALIGN(size));
+			if (mem == NULL) {
+				kfree(buf);
+				break;
+			}
+
+			buf->vbuf.m.offset = i * PAGE_ALIGN(size);
+			buf->vaddr = mem;
+		}
+
+		buf->vbuf.index = i;
+		buf->vbuf.length = size;
+		buf->vbuf.type = queue->type;
+		buf->vbuf.field = V4L2_FIELD_NONE;
+		buf->vbuf.memory = memory;
+
+		buf->queue = queue;
+		init_waitqueue_head(&buf->wait);
+
+		queue->buffers[i] = buf;
+	}
+
+	if (i == 0)
+		return -ENOMEM;
+
+	queue->count = i;
+	return nbuffers;
+}
+
+/**
+ * omap3isp_video_queue_cleanup - Clean up the video buffers queue
+ * @queue: Video buffers queue
+ *
+ * Free all allocated resources and clean up the video buffers queue. The queue
+ * must not be busy (no ongoing video stream) and buffers must have been
+ * unmapped.
+ *
+ * Return 0 on success or -EBUSY if the queue is busy or buffers haven't been
+ * unmapped.
+ */
+int omap3isp_video_queue_cleanup(struct isp_video_queue *queue)
+{
+	return isp_video_queue_free(queue);
+}
+
+/**
+ * omap3isp_video_queue_init - Initialize the video buffers queue
+ * @queue: Video buffers queue
+ * @type: V4L2 buffer type (capture or output)
+ * @ops: Driver-specific queue operations
+ * @dev: Device used for DMA operations
+ * @bufsize: Size of the driver-specific buffer structure
+ *
+ * Initialize the video buffers queue with the supplied parameters.
+ *
+ * The queue type must be one of V4L2_BUF_TYPE_VIDEO_CAPTURE or
+ * V4L2_BUF_TYPE_VIDEO_OUTPUT. Other buffer types are not supported yet.
+ *
+ * Buffer objects will be allocated using the given buffer size to allow room
+ * for driver-specific fields. Driver-specific buffer structures must start
+ * with a struct isp_video_buffer field. Drivers with no driver-specific buffer
+ * structure must pass the size of the isp_video_buffer structure in the bufsize
+ * parameter.
+ *
+ * Return 0 on success.
+ */
+int omap3isp_video_queue_init(struct isp_video_queue *queue,
+			      enum v4l2_buf_type type,
+			      const struct isp_video_queue_operations *ops,
+			      struct device *dev, unsigned int bufsize)
+{
+	INIT_LIST_HEAD(&queue->queue);
+	mutex_init(&queue->lock);
+	spin_lock_init(&queue->irqlock);
+
+	queue->type = type;
+	queue->ops = ops;
+	queue->dev = dev;
+	queue->bufsize = bufsize;
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 operations
+ */
+
+/**
+ * omap3isp_video_queue_reqbufs - Allocate video buffers memory
+ *
+ * This function is intended to be used as a VIDIOC_REQBUFS ioctl handler. It
+ * allocated video buffer objects and, for MMAP buffers, buffer memory.
+ *
+ * If the number of buffers is 0, all buffers are freed and the function returns
+ * without performing any allocation.
+ *
+ * If the number of buffers is not 0, currently allocated buffers (if any) are
+ * freed and the requested number of buffers are allocated. Depending on
+ * driver-specific requirements and on memory availability, a number of buffer
+ * smaller or bigger than requested can be allocated. This isn't considered as
+ * an error.
+ *
+ * Return 0 on success or one of the following error codes:
+ *
+ * -EINVAL if the buffer type or index are invalid
+ * -EBUSY if the queue is busy (streaming or buffers mapped)
+ * -ENOMEM if the buffers can't be allocated due to an out-of-memory condition
+ */
+int omap3isp_video_queue_reqbufs(struct isp_video_queue *queue,
+				 struct v4l2_requestbuffers *rb)
+{
+	unsigned int nbuffers = rb->count;
+	unsigned int size;
+	int ret;
+
+	if (rb->type != queue->type)
+		return -EINVAL;
+
+	queue->ops->queue_prepare(queue, &nbuffers, &size);
+	if (size == 0)
+		return -EINVAL;
+
+	nbuffers = min_t(unsigned int, nbuffers, ISP_VIDEO_MAX_BUFFERS);
+
+	mutex_lock(&queue->lock);
+
+	ret = isp_video_queue_alloc(queue, nbuffers, size, rb->memory);
+	if (ret < 0)
+		goto done;
+
+	rb->count = ret;
+	ret = 0;
+
+done:
+	mutex_unlock(&queue->lock);
+	return ret;
+}
+
+/**
+ * omap3isp_video_queue_querybuf - Query the status of a buffer in a queue
+ *
+ * This function is intended to be used as a VIDIOC_QUERYBUF ioctl handler. It
+ * returns the status of a given video buffer.
+ *
+ * Return 0 on success or -EINVAL if the buffer type or index are invalid.
+ */
+int omap3isp_video_queue_querybuf(struct isp_video_queue *queue,
+				  struct v4l2_buffer *vbuf)
+{
+	struct isp_video_buffer *buf;
+	int ret = 0;
+
+	if (vbuf->type != queue->type)
+		return -EINVAL;
+
+	mutex_lock(&queue->lock);
+
+	if (vbuf->index >= queue->count) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	buf = queue->buffers[vbuf->index];
+	isp_video_buffer_query(buf, vbuf);
+
+done:
+	mutex_unlock(&queue->lock);
+	return ret;
+}
+
+/**
+ * omap3isp_video_queue_qbuf - Queue a buffer
+ *
+ * This function is intended to be used as a VIDIOC_QBUF ioctl handler.
+ *
+ * The v4l2_buffer structure passed from userspace is first sanity tested. If
+ * sane, the buffer is then processed and added to the main queue and, if the
+ * queue is streaming, to the IRQ queue.
+ *
+ * Before being enqueued, USERPTR buffers are checked for address changes. If
+ * the buffer has a different userspace address, the old memory area is unlocked
+ * and the new memory area is locked.
+ */
+int omap3isp_video_queue_qbuf(struct isp_video_queue *queue,
+			      struct v4l2_buffer *vbuf)
+{
+	struct isp_video_buffer *buf;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (vbuf->type != queue->type)
+		goto done;
+
+	mutex_lock(&queue->lock);
+
+	if (vbuf->index >= queue->count)
+		goto done;
+
+	buf = queue->buffers[vbuf->index];
+
+	if (vbuf->memory != buf->vbuf.memory)
+		goto done;
+
+	if (buf->state != ISP_BUF_STATE_IDLE)
+		goto done;
+
+	if (vbuf->memory == V4L2_MEMORY_USERPTR &&
+	    vbuf->m.userptr != buf->vbuf.m.userptr) {
+		isp_video_buffer_cleanup(buf);
+		buf->vbuf.m.userptr = vbuf->m.userptr;
+		buf->prepared = 0;
+	}
+
+	if (!buf->prepared) {
+		ret = isp_video_buffer_prepare(buf);
+		if (ret < 0)
+			goto done;
+		buf->prepared = 1;
+	}
+
+	isp_video_buffer_cache_sync(buf);
+
+	buf->state = ISP_BUF_STATE_QUEUED;
+	list_add_tail(&buf->stream, &queue->queue);
+
+	if (queue->streaming) {
+		spin_lock_irqsave(&queue->irqlock, flags);
+		queue->ops->buffer_queue(buf);
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+	}
+
+	ret = 0;
+
+done:
+	mutex_unlock(&queue->lock);
+	return ret;
+}
+
+/**
+ * omap3isp_video_queue_dqbuf - Dequeue a buffer
+ *
+ * This function is intended to be used as a VIDIOC_DQBUF ioctl handler.
+ *
+ * The v4l2_buffer structure passed from userspace is first sanity tested. If
+ * sane, the buffer is then processed and added to the main queue and, if the
+ * queue is streaming, to the IRQ queue.
+ *
+ * Before being enqueued, USERPTR buffers are checked for address changes. If
+ * the buffer has a different userspace address, the old memory area is unlocked
+ * and the new memory area is locked.
+ */
+int omap3isp_video_queue_dqbuf(struct isp_video_queue *queue,
+			       struct v4l2_buffer *vbuf, int nonblocking)
+{
+	struct isp_video_buffer *buf;
+	int ret;
+
+	if (vbuf->type != queue->type)
+		return -EINVAL;
+
+	mutex_lock(&queue->lock);
+
+	if (list_empty(&queue->queue)) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	buf = list_first_entry(&queue->queue, struct isp_video_buffer, stream);
+	ret = isp_video_buffer_wait(buf, nonblocking);
+	if (ret < 0)
+		goto done;
+
+	list_del(&buf->stream);
+
+	isp_video_buffer_query(buf, vbuf);
+	buf->state = ISP_BUF_STATE_IDLE;
+	vbuf->flags &= ~V4L2_BUF_FLAG_QUEUED;
+
+done:
+	mutex_unlock(&queue->lock);
+	return ret;
+}
+
+/**
+ * omap3isp_video_queue_streamon - Start streaming
+ *
+ * This function is intended to be used as a VIDIOC_STREAMON ioctl handler. It
+ * starts streaming on the queue and calls the buffer_queue operation for all
+ * queued buffers.
+ *
+ * Return 0 on success.
+ */
+int omap3isp_video_queue_streamon(struct isp_video_queue *queue)
+{
+	struct isp_video_buffer *buf;
+	unsigned long flags;
+
+	mutex_lock(&queue->lock);
+
+	if (queue->streaming)
+		goto done;
+
+	queue->streaming = 1;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	list_for_each_entry(buf, &queue->queue, stream)
+		queue->ops->buffer_queue(buf);
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+
+done:
+	mutex_unlock(&queue->lock);
+	return 0;
+}
+
+/**
+ * omap3isp_video_queue_streamoff - Stop streaming
+ *
+ * This function is intended to be used as a VIDIOC_STREAMOFF ioctl handler. It
+ * stops streaming on the queue and wakes up all the buffers.
+ *
+ * Drivers must stop the hardware and synchronize with interrupt handlers and/or
+ * delayed works before calling this function to make sure no buffer will be
+ * touched by the driver and/or hardware.
+ */
+void omap3isp_video_queue_streamoff(struct isp_video_queue *queue)
+{
+	struct isp_video_buffer *buf;
+	unsigned long flags;
+	unsigned int i;
+
+	mutex_lock(&queue->lock);
+
+	if (!queue->streaming)
+		goto done;
+
+	queue->streaming = 0;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	for (i = 0; i < queue->count; ++i) {
+		buf = queue->buffers[i];
+
+		if (buf->state == ISP_BUF_STATE_ACTIVE)
+			wake_up(&buf->wait);
+
+		buf->state = ISP_BUF_STATE_IDLE;
+	}
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+
+	INIT_LIST_HEAD(&queue->queue);
+
+done:
+	mutex_unlock(&queue->lock);
+}
+
+/**
+ * omap3isp_video_queue_discard_done - Discard all buffers marked as DONE
+ *
+ * This function is intended to be used with suspend/resume operations. It
+ * discards all 'done' buffers as they would be too old to be requested after
+ * resume.
+ *
+ * Drivers must stop the hardware and synchronize with interrupt handlers and/or
+ * delayed works before calling this function to make sure no buffer will be
+ * touched by the driver and/or hardware.
+ */
+void omap3isp_video_queue_discard_done(struct isp_video_queue *queue)
+{
+	struct isp_video_buffer *buf;
+	unsigned int i;
+
+	mutex_lock(&queue->lock);
+
+	if (!queue->streaming)
+		goto done;
+
+	for (i = 0; i < queue->count; ++i) {
+		buf = queue->buffers[i];
+
+		if (buf->state == ISP_BUF_STATE_DONE)
+			buf->state = ISP_BUF_STATE_ERROR;
+	}
+
+done:
+	mutex_unlock(&queue->lock);
+}
+
+static void isp_video_queue_vm_open(struct vm_area_struct *vma)
+{
+	struct isp_video_buffer *buf = vma->vm_private_data;
+
+	buf->vma_use_count++;
+}
+
+static void isp_video_queue_vm_close(struct vm_area_struct *vma)
+{
+	struct isp_video_buffer *buf = vma->vm_private_data;
+
+	buf->vma_use_count--;
+}
+
+static const struct vm_operations_struct isp_video_queue_vm_ops = {
+	.open = isp_video_queue_vm_open,
+	.close = isp_video_queue_vm_close,
+};
+
+/**
+ * omap3isp_video_queue_mmap - Map buffers to userspace
+ *
+ * This function is intended to be used as an mmap() file operation handler. It
+ * maps a buffer to userspace based on the VMA offset.
+ *
+ * Only buffers of memory type MMAP are supported.
+ */
+int omap3isp_video_queue_mmap(struct isp_video_queue *queue,
+			 struct vm_area_struct *vma)
+{
+	struct isp_video_buffer *uninitialized_var(buf);
+	unsigned long size;
+	unsigned int i;
+	int ret = 0;
+
+	mutex_lock(&queue->lock);
+
+	for (i = 0; i < queue->count; ++i) {
+		buf = queue->buffers[i];
+		if ((buf->vbuf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+
+	if (i == queue->count) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	size = vma->vm_end - vma->vm_start;
+
+	if (buf->vbuf.memory != V4L2_MEMORY_MMAP ||
+	    size != PAGE_ALIGN(buf->vbuf.length)) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	ret = remap_vmalloc_range(vma, buf->vaddr, 0);
+	if (ret < 0)
+		goto done;
+
+	vma->vm_ops = &isp_video_queue_vm_ops;
+	vma->vm_private_data = buf;
+	isp_video_queue_vm_open(vma);
+
+done:
+	mutex_unlock(&queue->lock);
+	return ret;
+}
+
+/**
+ * omap3isp_video_queue_poll - Poll video queue state
+ *
+ * This function is intended to be used as a poll() file operation handler. It
+ * polls the state of the video buffer at the front of the queue and returns an
+ * events mask.
+ *
+ * If no buffer is present at the front of the queue, POLLERR is returned.
+ */
+unsigned int omap3isp_video_queue_poll(struct isp_video_queue *queue,
+				       struct file *file, poll_table *wait)
+{
+	struct isp_video_buffer *buf;
+	unsigned int mask = 0;
+
+	mutex_lock(&queue->lock);
+	if (list_empty(&queue->queue)) {
+		mask |= POLLERR;
+		goto done;
+	}
+	buf = list_first_entry(&queue->queue, struct isp_video_buffer, stream);
+
+	poll_wait(file, &buf->wait, wait);
+	if (buf->state == ISP_BUF_STATE_DONE ||
+	    buf->state == ISP_BUF_STATE_ERROR) {
+		if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			mask |= POLLIN | POLLRDNORM;
+		else
+			mask |= POLLOUT | POLLWRNORM;
+	}
+
+done:
+	mutex_unlock(&queue->lock);
+	return mask;
+}
diff --git a/drivers/media/video/isp/ispqueue.h b/drivers/media/video/isp/ispqueue.h
new file mode 100644
index 0000000..f05aba3
--- /dev/null
+++ b/drivers/media/video/isp/ispqueue.h
@@ -0,0 +1,185 @@
+/*
+ * ispqueue.h
+ *
+ * TI OMAP3 ISP - Video buffers queue handling
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_QUEUE_H
+#define OMAP3_ISP_QUEUE_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+
+struct isp_video_queue;
+struct page;
+struct scatterlist;
+
+#define ISP_VIDEO_MAX_BUFFERS		16
+
+/**
+ * enum isp_video_buffer_state - ISP video buffer state
+ * @ISP_BUF_STATE_IDLE:	The buffer is under userspace control (dequeued
+ *	or not queued yet).
+ * @ISP_BUF_STATE_QUEUED: The buffer has been queued but isn't used by the
+ *	device yet.
+ * @ISP_BUF_STATE_ACTIVE: The buffer is in use for an active video transfer.
+ * @ISP_BUF_STATE_ERROR: The device is done with the buffer and an error
+ *	occured. For capture device the buffer likely contains corrupted data or
+ *	no data at all.
+ * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occured.
+ *	For capture devices the buffer contains valid data.
+ */
+enum isp_video_buffer_state {
+	ISP_BUF_STATE_IDLE,
+	ISP_BUF_STATE_QUEUED,
+	ISP_BUF_STATE_ACTIVE,
+	ISP_BUF_STATE_ERROR,
+	ISP_BUF_STATE_DONE,
+};
+
+/**
+ * struct isp_video_buffer - ISP video buffer
+ * @vma_use_count: Number of times the buffer is mmap'ed to userspace
+ * @stream: List head for insertion into main queue
+ * @queue: ISP buffers queue this buffer belongs to
+ * @prepared: Whether the buffer has been prepared
+ * @vaddr: Memory virtual address (for kernel buffers)
+ * @vm_flags: Buffer VMA flags (for userspace buffers)
+ * @offset: Offset inside the first page (for userspace buffers)
+ * @npages: Number of pages (for userspace buffers)
+ * @pages: Pages table (for userspace non-VM_PFNMAP buffers)
+ * @paddr: Memory physical address (for userspace VM_PFNMAP buffers)
+ * @sglen: Number of elements in the scatter list (for non-VM_PFNMAP buffers)
+ * @sglist: Scatter list (for non-VM_PFNMAP buffers)
+ * @vbuf: V4L2 buffer
+ * @irqlist: List head for insertion into IRQ queue
+ * @state: Current buffer state
+ * @wait: Wait queue to signal buffer completion
+ */
+struct isp_video_buffer {
+	unsigned long vma_use_count;
+	struct list_head stream;
+	struct isp_video_queue *queue;
+	unsigned int prepared:1;
+
+	/* For kernel buffers. */
+	void *vaddr;
+
+	/* For userspace buffers. */
+	unsigned long vm_flags;
+	unsigned long offset;
+	unsigned int npages;
+	struct page **pages;
+	dma_addr_t paddr;
+
+	/* For all buffers except VM_PFNMAP. */
+	unsigned int sglen;
+	struct scatterlist *sglist;
+
+	/* Touched by the interrupt handler. */
+	struct v4l2_buffer vbuf;
+	struct list_head irqlist;
+	enum isp_video_buffer_state state;
+	wait_queue_head_t wait;
+};
+
+#define to_isp_video_buffer(vb)	container_of(vb, struct isp_video_buffer, vb)
+
+/**
+ * struct isp_video_queue_operations - Driver-specific operations
+ * @queue_prepare: Called before allocating buffers. Drivers should clamp the
+ *	number of buffers according to their requirements, and must return the
+ *	buffer size in bytes.
+ * @buffer_prepare: Called the first time a buffer is queued, or after changing
+ *	the userspace memory address for a USERPTR buffer, with the queue lock
+ *	held. Drivers should perform device-specific buffer preparation (such as
+ *	mapping the buffer memory in an IOMMU). This operation is optional.
+ * @buffer_queue: Called when a buffer is being added to the queue with the
+ *	queue irqlock spinlock held.
+ * @buffer_cleanup: Called before freeing buffers, or before changing the
+ *	userspace memory address for a USERPTR buffer, with the queue lock held.
+ *	Drivers must perform cleanup operations required to undo the
+ *	buffer_prepare call. This operation is optional.
+ */
+struct isp_video_queue_operations {
+	void (*queue_prepare)(struct isp_video_queue *queue,
+			      unsigned int *nbuffers, unsigned int *size);
+	int  (*buffer_prepare)(struct isp_video_buffer *buf);
+	void (*buffer_queue)(struct isp_video_buffer *buf);
+	void (*buffer_cleanup)(struct isp_video_buffer *buf);
+};
+
+/**
+ * struct isp_video_queue - ISP video buffers queue
+ * @type: Type of video buffers handled by this queue
+ * @ops: Queue operations
+ * @dev: Device used for DMA operations
+ * @bufsize: Size of a driver-specific buffer object
+ * @count: Number of currently allocated buffers
+ * @buffers: ISP video buffers
+ * @lock: Mutex to protect access to the buffers, main queue and state
+ * @irqlock: Spinlock to protect access to the IRQ queue
+ * @streaming: Queue state, indicates whether the queue is streaming
+ * @queue: List of all queued buffers
+ */
+struct isp_video_queue {
+	enum v4l2_buf_type type;
+	const struct isp_video_queue_operations *ops;
+	struct device *dev;
+	unsigned int bufsize;
+
+	unsigned int count;
+	struct isp_video_buffer *buffers[ISP_VIDEO_MAX_BUFFERS];
+	struct mutex lock;
+	spinlock_t irqlock;
+
+	unsigned int streaming:1;
+
+	struct list_head queue;
+};
+
+int omap3isp_video_queue_cleanup(struct isp_video_queue *queue);
+int omap3isp_video_queue_init(struct isp_video_queue *queue,
+			      enum v4l2_buf_type type,
+			      const struct isp_video_queue_operations *ops,
+			      struct device *dev, unsigned int bufsize);
+
+int omap3isp_video_queue_reqbufs(struct isp_video_queue *queue,
+				 struct v4l2_requestbuffers *rb);
+int omap3isp_video_queue_querybuf(struct isp_video_queue *queue,
+				  struct v4l2_buffer *vbuf);
+int omap3isp_video_queue_qbuf(struct isp_video_queue *queue,
+			      struct v4l2_buffer *vbuf);
+int omap3isp_video_queue_dqbuf(struct isp_video_queue *queue,
+			       struct v4l2_buffer *vbuf, int nonblocking);
+int omap3isp_video_queue_streamon(struct isp_video_queue *queue);
+void omap3isp_video_queue_streamoff(struct isp_video_queue *queue);
+void omap3isp_video_queue_discard_done(struct isp_video_queue *queue);
+int omap3isp_video_queue_mmap(struct isp_video_queue *queue,
+			      struct vm_area_struct *vma);
+unsigned int omap3isp_video_queue_poll(struct isp_video_queue *queue,
+				       struct file *file, poll_table *wait);
+
+#endif /* OMAP3_ISP_QUEUE_H */
diff --git a/drivers/media/video/isp/ispreg.h b/drivers/media/video/isp/ispreg.h
new file mode 100644
index 0000000..e78c7e3
--- /dev/null
+++ b/drivers/media/video/isp/ispreg.h
@@ -0,0 +1,1589 @@
+/*
+ * ispreg.h
+ *
+ * TI OMAP3 ISP - Registers definitions
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_REG_H
+#define OMAP3_ISP_REG_H
+
+#include <plat/omap34xx.h>
+
+
+#define CM_CAM_MCLK_HZ			172800000	/* Hz */
+
+/* ISP Submodules offset */
+
+#define OMAP3ISP_REG_BASE		OMAP3430_ISP_BASE
+#define OMAP3ISP_REG(offset)		(OMAP3ISP_REG_BASE + (offset))
+
+#define OMAP3ISP_CCP2_REG_OFFSET	0x0400
+#define OMAP3ISP_CCP2_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CCP2_REG_OFFSET)
+#define OMAP3ISP_CCP2_REG(offset)	(OMAP3ISP_CCP2_REG_BASE + (offset))
+
+#define OMAP3ISP_CCDC_REG_OFFSET	0x0600
+#define OMAP3ISP_CCDC_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CCDC_REG_OFFSET)
+#define OMAP3ISP_CCDC_REG(offset)	(OMAP3ISP_CCDC_REG_BASE + (offset))
+
+#define OMAP3ISP_HIST_REG_OFFSET	0x0A00
+#define OMAP3ISP_HIST_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_HIST_REG_OFFSET)
+#define OMAP3ISP_HIST_REG(offset)	(OMAP3ISP_HIST_REG_BASE + (offset))
+
+#define OMAP3ISP_H3A_REG_OFFSET		0x0C00
+#define OMAP3ISP_H3A_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_H3A_REG_OFFSET)
+#define OMAP3ISP_H3A_REG(offset)	(OMAP3ISP_H3A_REG_BASE + (offset))
+
+#define OMAP3ISP_PREV_REG_OFFSET	0x0E00
+#define OMAP3ISP_PREV_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_PREV_REG_OFFSET)
+#define OMAP3ISP_PREV_REG(offset)	(OMAP3ISP_PREV_REG_BASE + (offset))
+
+#define OMAP3ISP_RESZ_REG_OFFSET	0x1000
+#define OMAP3ISP_RESZ_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_RESZ_REG_OFFSET)
+#define OMAP3ISP_RESZ_REG(offset)	(OMAP3ISP_RESZ_REG_BASE + (offset))
+
+#define OMAP3ISP_SBL_REG_OFFSET		0x1200
+#define OMAP3ISP_SBL_REG_BASE		(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_SBL_REG_OFFSET)
+#define OMAP3ISP_SBL_REG(offset)	(OMAP3ISP_SBL_REG_BASE + (offset))
+
+#define OMAP3ISP_CSI2A_REGS1_REG_OFFSET	0x1800
+#define OMAP3ISP_CSI2A_REGS1_REG_BASE	(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CSI2A_REGS1_REG_OFFSET)
+#define OMAP3ISP_CSI2A_REGS1_REG(offset)				\
+				(OMAP3ISP_CSI2A_REGS1_REG_BASE + (offset))
+
+#define OMAP3ISP_CSIPHY2_REG_OFFSET	0x1970
+#define OMAP3ISP_CSIPHY2_REG_BASE	(OMAP3ISP_REG_BASE +	\
+					 OMAP3ISP_CSIPHY2_REG_OFFSET)
+#define OMAP3ISP_CSIPHY2_REG(offset)	(OMAP3ISP_CSIPHY2_REG_BASE + (offset))
+
+#define OMAP3ISP_CSI2A_REGS2_REG_OFFSET	0x19C0
+#define OMAP3ISP_CSI2A_REGS2_REG_BASE	(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CSI2A_REGS2_REG_OFFSET)
+#define OMAP3ISP_CSI2A_REGS2_REG(offset)				\
+				(OMAP3ISP_CSI2A_REGS2_REG_BASE + (offset))
+
+#define OMAP3ISP_CSI2C_REGS1_REG_OFFSET	0x1C00
+#define OMAP3ISP_CSI2C_REGS1_REG_BASE	(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CSI2C_REGS1_REG_OFFSET)
+#define OMAP3ISP_CSI2C_REGS1_REG(offset)				\
+				(OMAP3ISP_CSI2C_REGS1_REG_BASE + (offset))
+
+#define OMAP3ISP_CSIPHY1_REG_OFFSET	0x1D70
+#define OMAP3ISP_CSIPHY1_REG_BASE	(OMAP3ISP_REG_BASE +	\
+					 OMAP3ISP_CSIPHY1_REG_OFFSET)
+#define OMAP3ISP_CSIPHY1_REG(offset)	(OMAP3ISP_CSIPHY1_REG_BASE + (offset))
+
+#define OMAP3ISP_CSI2C_REGS2_REG_OFFSET	0x1DC0
+#define OMAP3ISP_CSI2C_REGS2_REG_BASE	(OMAP3ISP_REG_BASE +		\
+					 OMAP3ISP_CSI2C_REGS2_REG_OFFSET)
+#define OMAP3ISP_CSI2C_REGS2_REG(offset)				\
+				(OMAP3ISP_CSI2C_REGS2_REG_BASE + (offset))
+
+/* ISP module register offset */
+
+#define ISP_REVISION			(0x000)
+#define ISP_SYSCONFIG			(0x004)
+#define ISP_SYSSTATUS			(0x008)
+#define ISP_IRQ0ENABLE			(0x00C)
+#define ISP_IRQ0STATUS			(0x010)
+#define ISP_IRQ1ENABLE			(0x014)
+#define ISP_IRQ1STATUS			(0x018)
+#define ISP_TCTRL_GRESET_LENGTH		(0x030)
+#define ISP_TCTRL_PSTRB_REPLAY		(0x034)
+#define ISP_CTRL			(0x040)
+#define ISP_SECURE			(0x044)
+#define ISP_TCTRL_CTRL			(0x050)
+#define ISP_TCTRL_FRAME			(0x054)
+#define ISP_TCTRL_PSTRB_DELAY		(0x058)
+#define ISP_TCTRL_STRB_DELAY		(0x05C)
+#define ISP_TCTRL_SHUT_DELAY		(0x060)
+#define ISP_TCTRL_PSTRB_LENGTH		(0x064)
+#define ISP_TCTRL_STRB_LENGTH		(0x068)
+#define ISP_TCTRL_SHUT_LENGTH		(0x06C)
+#define ISP_PING_PONG_ADDR		(0x070)
+#define ISP_PING_PONG_MEM_RANGE		(0x074)
+#define ISP_PING_PONG_BUF_SIZE		(0x078)
+
+/* CCP2 receiver registers */
+
+#define ISPCCP2_REVISION		(0x000)
+#define ISPCCP2_SYSCONFIG		(0x004)
+#define ISPCCP2_SYSCONFIG_SOFT_RESET	(1 << 1)
+#define ISPCCP2_SYSCONFIG_AUTO_IDLE		0x1
+#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT	12
+#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_FORCE	\
+	(0x0 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_NO	\
+	(0x1 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART	\
+	(0x2 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCCP2_SYSSTATUS		(0x008)
+#define ISPCCP2_SYSSTATUS_RESET_DONE	(1 << 0)
+#define ISPCCP2_LC01_IRQENABLE		(0x00C)
+#define ISPCCP2_LC01_IRQSTATUS		(0x010)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ	(1 << 11)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_LE_IRQ	(1 << 10)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_LS_IRQ	(1 << 9)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FE_IRQ	(1 << 8)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_COUNT_IRQ	(1 << 7)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ	(1 << 5)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ	(1 << 4)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ	(1 << 3)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ	(1 << 2)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ	(1 << 1)
+#define ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ	(1 << 0)
+
+#define ISPCCP2_LC23_IRQENABLE		(0x014)
+#define ISPCCP2_LC23_IRQSTATUS		(0x018)
+#define ISPCCP2_LCM_IRQENABLE		(0x02C)
+#define ISPCCP2_LCM_IRQSTATUS_EOF_IRQ		(1 << 0)
+#define ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ	(1 << 1)
+#define ISPCCP2_LCM_IRQSTATUS		(0x030)
+#define ISPCCP2_CTRL			(0x040)
+#define ISPCCP2_CTRL_IF_EN		(1 << 0)
+#define ISPCCP2_CTRL_PHY_SEL		(1 << 1)
+#define ISPCCP2_CTRL_PHY_SEL_CLOCK	(0 << 1)
+#define ISPCCP2_CTRL_PHY_SEL_STROBE	(1 << 1)
+#define ISPCCP2_CTRL_PHY_SEL_MASK	0x1
+#define ISPCCP2_CTRL_PHY_SEL_SHIFT	1
+#define ISPCCP2_CTRL_IO_OUT_SEL		(1 << 2)
+#define ISPCCP2_CTRL_MODE		(1 << 4)
+#define ISPCCP2_CTRL_VP_CLK_FORCE_ON	(1 << 9)
+#define ISPCCP2_CTRL_INV		(1 << 10)
+#define ISPCCP2_CTRL_INV_MASK		0x1
+#define ISPCCP2_CTRL_INV_SHIFT		10
+#define ISPCCP2_CTRL_VP_ONLY_EN		(1 << 11)
+#define ISPCCP2_CTRL_VP_CLK_POL		(1 << 12)
+#define ISPCCP2_CTRL_VPCLK_DIV_SHIFT	15
+#define ISPCCP2_CTRL_VPCLK_DIV_MASK	0x1ffff /* [31:15] */
+#define ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT	8 /* 3430 bits */
+#define ISPCCP2_CTRL_VP_OUT_CTRL_MASK	0x3 /* 3430 bits */
+#define ISPCCP2_DBG			(0x044)
+#define ISPCCP2_GNQ			(0x048)
+#define ISPCCP2_LCx_CTRL(x)			((0x050)+0x30*(x))
+#define ISPCCP2_LCx_CTRL_CHAN_EN		(1 << 0)
+#define ISPCCP2_LCx_CTRL_CRC_EN			(1 << 19)
+#define ISPCCP2_LCx_CTRL_CRC_MASK		0x1
+#define ISPCCP2_LCx_CTRL_CRC_SHIFT		2
+#define ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0		19
+#define ISPCCP2_LCx_CTRL_REGION_EN		(1 << 1)
+#define ISPCCP2_LCx_CTRL_REGION_MASK		0x1
+#define ISPCCP2_LCx_CTRL_REGION_SHIFT		1
+#define ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0	0x3f
+#define ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0	0x2
+#define ISPCCP2_LCx_CTRL_FORMAT_MASK		0x1f
+#define ISPCCP2_LCx_CTRL_FORMAT_SHIFT		0x3
+#define ISPCCP2_LCx_CODE(x)		((0x054)+0x30*(x))
+#define ISPCCP2_LCx_STAT_START(x)	((0x058)+0x30*(x))
+#define ISPCCP2_LCx_STAT_SIZE(x)	((0x05C)+0x30*(x))
+#define ISPCCP2_LCx_SOF_ADDR(x)		((0x060)+0x30*(x))
+#define ISPCCP2_LCx_EOF_ADDR(x)		((0x064)+0x30*(x))
+#define ISPCCP2_LCx_DAT_START(x)	((0x068)+0x30*(x))
+#define ISPCCP2_LCx_DAT_SIZE(x)		((0x06C)+0x30*(x))
+#define ISPCCP2_LCx_DAT_MASK		0xFFF
+#define ISPCCP2_LCx_DAT_SHIFT		16
+#define ISPCCP2_LCx_DAT_PING_ADDR(x)	((0x070)+0x30*(x))
+#define ISPCCP2_LCx_DAT_PONG_ADDR(x)	((0x074)+0x30*(x))
+#define ISPCCP2_LCx_DAT_OFST(x)		((0x078)+0x30*(x))
+#define ISPCCP2_LCM_CTRL		(0x1D0)
+#define ISPCCP2_LCM_CTRL_CHAN_EN               (1 << 0)
+#define ISPCCP2_LCM_CTRL_DST_PORT              (1 << 2)
+#define ISPCCP2_LCM_CTRL_DST_PORT_SHIFT		2
+#define ISPCCP2_LCM_CTRL_READ_THROTTLE_SHIFT	3
+#define ISPCCP2_LCM_CTRL_READ_THROTTLE_MASK	0x11
+#define ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT	5
+#define ISPCCP2_LCM_CTRL_BURST_SIZE_MASK	0x7
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT	16
+#define ISPCCP2_LCM_CTRL_SRC_FORMAT_MASK	0x7
+#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT	20
+#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_MASK	0x3
+#define ISPCCP2_LCM_CTRL_SRC_DPCM_PRED		(1 << 22)
+#define ISPCCP2_LCM_CTRL_SRC_PACK		(1 << 23)
+#define ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT	24
+#define ISPCCP2_LCM_CTRL_DST_FORMAT_MASK	0x7
+#define ISPCCP2_LCM_VSIZE		(0x1D4)
+#define ISPCCP2_LCM_VSIZE_SHIFT		16
+#define ISPCCP2_LCM_HSIZE		(0x1D8)
+#define ISPCCP2_LCM_HSIZE_SHIFT		16
+#define ISPCCP2_LCM_PREFETCH		(0x1DC)
+#define ISPCCP2_LCM_PREFETCH_SHIFT	3
+#define ISPCCP2_LCM_SRC_ADDR		(0x1E0)
+#define ISPCCP2_LCM_SRC_OFST		(0x1E4)
+#define ISPCCP2_LCM_DST_ADDR		(0x1E8)
+#define ISPCCP2_LCM_DST_OFST		(0x1EC)
+
+/* CCDC module register offset */
+
+#define ISPCCDC_PID			(0x000)
+#define ISPCCDC_PCR			(0x004)
+#define ISPCCDC_SYN_MODE		(0x008)
+#define ISPCCDC_HD_VD_WID		(0x00C)
+#define ISPCCDC_PIX_LINES		(0x010)
+#define ISPCCDC_HORZ_INFO		(0x014)
+#define ISPCCDC_VERT_START		(0x018)
+#define ISPCCDC_VERT_LINES		(0x01C)
+#define ISPCCDC_CULLING			(0x020)
+#define ISPCCDC_HSIZE_OFF		(0x024)
+#define ISPCCDC_SDOFST			(0x028)
+#define ISPCCDC_SDR_ADDR		(0x02C)
+#define ISPCCDC_CLAMP			(0x030)
+#define ISPCCDC_DCSUB			(0x034)
+#define ISPCCDC_COLPTN			(0x038)
+#define ISPCCDC_BLKCMP			(0x03C)
+#define ISPCCDC_FPC			(0x040)
+#define ISPCCDC_FPC_ADDR		(0x044)
+#define ISPCCDC_VDINT			(0x048)
+#define ISPCCDC_ALAW			(0x04C)
+#define ISPCCDC_REC656IF		(0x050)
+#define ISPCCDC_CFG			(0x054)
+#define ISPCCDC_FMTCFG			(0x058)
+#define ISPCCDC_FMT_HORZ		(0x05C)
+#define ISPCCDC_FMT_VERT		(0x060)
+#define ISPCCDC_FMT_ADDR0		(0x064)
+#define ISPCCDC_FMT_ADDR1		(0x068)
+#define ISPCCDC_FMT_ADDR2		(0x06C)
+#define ISPCCDC_FMT_ADDR3		(0x070)
+#define ISPCCDC_FMT_ADDR4		(0x074)
+#define ISPCCDC_FMT_ADDR5		(0x078)
+#define ISPCCDC_FMT_ADDR6		(0x07C)
+#define ISPCCDC_FMT_ADDR7		(0x080)
+#define ISPCCDC_PRGEVEN0		(0x084)
+#define ISPCCDC_PRGEVEN1		(0x088)
+#define ISPCCDC_PRGODD0			(0x08C)
+#define ISPCCDC_PRGODD1			(0x090)
+#define ISPCCDC_VP_OUT			(0x094)
+
+#define ISPCCDC_LSC_CONFIG		(0x098)
+#define ISPCCDC_LSC_INITIAL		(0x09C)
+#define ISPCCDC_LSC_TABLE_BASE		(0x0A0)
+#define ISPCCDC_LSC_TABLE_OFFSET	(0x0A4)
+
+/* SBL */
+#define ISPSBL_PCR			0x4
+#define ISPSBL_PCR_H3A_AEAWB_WBL_OVF	(1 << 16)
+#define ISPSBL_PCR_H3A_AF_WBL_OVF	(1 << 17)
+#define ISPSBL_PCR_RSZ4_WBL_OVF		(1 << 18)
+#define ISPSBL_PCR_RSZ3_WBL_OVF		(1 << 19)
+#define ISPSBL_PCR_RSZ2_WBL_OVF		(1 << 20)
+#define ISPSBL_PCR_RSZ1_WBL_OVF		(1 << 21)
+#define ISPSBL_PCR_PRV_WBL_OVF		(1 << 22)
+#define ISPSBL_PCR_CCDC_WBL_OVF		(1 << 23)
+#define ISPSBL_PCR_CCDCPRV_2_RSZ_OVF	(1 << 24)
+#define ISPSBL_PCR_CSIA_WBL_OVF		(1 << 25)
+#define ISPSBL_PCR_CSIB_WBL_OVF		(1 << 26)
+#define ISPSBL_CCDC_WR_0		(0x028)
+#define ISPSBL_CCDC_WR_0_DATA_READY	(1 << 21)
+#define ISPSBL_CCDC_WR_1		(0x02C)
+#define ISPSBL_CCDC_WR_2		(0x030)
+#define ISPSBL_CCDC_WR_3		(0x034)
+
+#define ISPSBL_SDR_REQ_EXP		0xF8
+#define ISPSBL_SDR_REQ_HIST_EXP_SHIFT	0
+#define ISPSBL_SDR_REQ_HIST_EXP_MASK	(0x3FF)
+#define ISPSBL_SDR_REQ_RSZ_EXP_SHIFT	10
+#define ISPSBL_SDR_REQ_RSZ_EXP_MASK	(0x3FF << ISPSBL_SDR_REQ_RSZ_EXP_SHIFT)
+#define ISPSBL_SDR_REQ_PRV_EXP_SHIFT	20
+#define ISPSBL_SDR_REQ_PRV_EXP_MASK	(0x3FF << ISPSBL_SDR_REQ_PRV_EXP_SHIFT)
+
+/* Histogram registers */
+#define ISPHIST_PID			(0x000)
+#define ISPHIST_PCR			(0x004)
+#define ISPHIST_CNT			(0x008)
+#define ISPHIST_WB_GAIN			(0x00C)
+#define ISPHIST_R0_HORZ			(0x010)
+#define ISPHIST_R0_VERT			(0x014)
+#define ISPHIST_R1_HORZ			(0x018)
+#define ISPHIST_R1_VERT			(0x01C)
+#define ISPHIST_R2_HORZ			(0x020)
+#define ISPHIST_R2_VERT			(0x024)
+#define ISPHIST_R3_HORZ			(0x028)
+#define ISPHIST_R3_VERT			(0x02C)
+#define ISPHIST_ADDR			(0x030)
+#define ISPHIST_DATA			(0x034)
+#define ISPHIST_RADD			(0x038)
+#define ISPHIST_RADD_OFF		(0x03C)
+#define ISPHIST_H_V_INFO		(0x040)
+
+/* H3A module registers */
+#define ISPH3A_PID			(0x000)
+#define ISPH3A_PCR			(0x004)
+#define ISPH3A_AEWWIN1			(0x04C)
+#define ISPH3A_AEWINSTART		(0x050)
+#define ISPH3A_AEWINBLK			(0x054)
+#define ISPH3A_AEWSUBWIN		(0x058)
+#define ISPH3A_AEWBUFST			(0x05C)
+#define ISPH3A_AFPAX1			(0x008)
+#define ISPH3A_AFPAX2			(0x00C)
+#define ISPH3A_AFPAXSTART		(0x010)
+#define ISPH3A_AFIIRSH			(0x014)
+#define ISPH3A_AFBUFST			(0x018)
+#define ISPH3A_AFCOEF010		(0x01C)
+#define ISPH3A_AFCOEF032		(0x020)
+#define ISPH3A_AFCOEF054		(0x024)
+#define ISPH3A_AFCOEF076		(0x028)
+#define ISPH3A_AFCOEF098		(0x02C)
+#define ISPH3A_AFCOEF0010		(0x030)
+#define ISPH3A_AFCOEF110		(0x034)
+#define ISPH3A_AFCOEF132		(0x038)
+#define ISPH3A_AFCOEF154		(0x03C)
+#define ISPH3A_AFCOEF176		(0x040)
+#define ISPH3A_AFCOEF198		(0x044)
+#define ISPH3A_AFCOEF1010		(0x048)
+
+#define ISPPRV_PCR			(0x004)
+#define ISPPRV_HORZ_INFO		(0x008)
+#define ISPPRV_VERT_INFO		(0x00C)
+#define ISPPRV_RSDR_ADDR		(0x010)
+#define ISPPRV_RADR_OFFSET		(0x014)
+#define ISPPRV_DSDR_ADDR		(0x018)
+#define ISPPRV_DRKF_OFFSET		(0x01C)
+#define ISPPRV_WSDR_ADDR		(0x020)
+#define ISPPRV_WADD_OFFSET		(0x024)
+#define ISPPRV_AVE			(0x028)
+#define ISPPRV_HMED			(0x02C)
+#define ISPPRV_NF			(0x030)
+#define ISPPRV_WB_DGAIN			(0x034)
+#define ISPPRV_WBGAIN			(0x038)
+#define ISPPRV_WBSEL			(0x03C)
+#define ISPPRV_CFA			(0x040)
+#define ISPPRV_BLKADJOFF		(0x044)
+#define ISPPRV_RGB_MAT1			(0x048)
+#define ISPPRV_RGB_MAT2			(0x04C)
+#define ISPPRV_RGB_MAT3			(0x050)
+#define ISPPRV_RGB_MAT4			(0x054)
+#define ISPPRV_RGB_MAT5			(0x058)
+#define ISPPRV_RGB_OFF1			(0x05C)
+#define ISPPRV_RGB_OFF2			(0x060)
+#define ISPPRV_CSC0			(0x064)
+#define ISPPRV_CSC1			(0x068)
+#define ISPPRV_CSC2			(0x06C)
+#define ISPPRV_CSC_OFFSET		(0x070)
+#define ISPPRV_CNT_BRT			(0x074)
+#define ISPPRV_CSUP			(0x078)
+#define ISPPRV_SETUP_YC			(0x07C)
+#define ISPPRV_SET_TBL_ADDR		(0x080)
+#define ISPPRV_SET_TBL_DATA		(0x084)
+#define ISPPRV_CDC_THR0			(0x090)
+#define ISPPRV_CDC_THR1			(ISPPRV_CDC_THR0 + (0x4))
+#define ISPPRV_CDC_THR2			(ISPPRV_CDC_THR0 + (0x4) * 2)
+#define ISPPRV_CDC_THR3			(ISPPRV_CDC_THR0 + (0x4) * 3)
+
+#define ISPPRV_REDGAMMA_TABLE_ADDR	0x0000
+#define ISPPRV_GREENGAMMA_TABLE_ADDR	0x0400
+#define ISPPRV_BLUEGAMMA_TABLE_ADDR	0x0800
+#define ISPPRV_NF_TABLE_ADDR		0x0C00
+#define ISPPRV_YENH_TABLE_ADDR		0x1000
+#define ISPPRV_CFA_TABLE_ADDR		0x1400
+
+#define ISPPRV_MAXOUTPUT_WIDTH		1280
+#define ISPPRV_MAXOUTPUT_WIDTH_ES2	3300
+#define ISPPRV_MAXOUTPUT_WIDTH_3630	4096
+#define ISPRSZ_MIN_OUTPUT		64
+#define ISPRSZ_MAX_OUTPUT		3312
+
+/* Resizer module register offset */
+#define ISPRSZ_PID			(0x000)
+#define ISPRSZ_PCR			(0x004)
+#define ISPRSZ_CNT			(0x008)
+#define ISPRSZ_OUT_SIZE			(0x00C)
+#define ISPRSZ_IN_START			(0x010)
+#define ISPRSZ_IN_SIZE			(0x014)
+#define ISPRSZ_SDR_INADD		(0x018)
+#define ISPRSZ_SDR_INOFF		(0x01C)
+#define ISPRSZ_SDR_OUTADD		(0x020)
+#define ISPRSZ_SDR_OUTOFF		(0x024)
+#define ISPRSZ_HFILT10			(0x028)
+#define ISPRSZ_HFILT32			(0x02C)
+#define ISPRSZ_HFILT54			(0x030)
+#define ISPRSZ_HFILT76			(0x034)
+#define ISPRSZ_HFILT98			(0x038)
+#define ISPRSZ_HFILT1110		(0x03C)
+#define ISPRSZ_HFILT1312		(0x040)
+#define ISPRSZ_HFILT1514		(0x044)
+#define ISPRSZ_HFILT1716		(0x048)
+#define ISPRSZ_HFILT1918		(0x04C)
+#define ISPRSZ_HFILT2120		(0x050)
+#define ISPRSZ_HFILT2322		(0x054)
+#define ISPRSZ_HFILT2524		(0x058)
+#define ISPRSZ_HFILT2726		(0x05C)
+#define ISPRSZ_HFILT2928		(0x060)
+#define ISPRSZ_HFILT3130		(0x064)
+#define ISPRSZ_VFILT10			(0x068)
+#define ISPRSZ_VFILT32			(0x06C)
+#define ISPRSZ_VFILT54			(0x070)
+#define ISPRSZ_VFILT76			(0x074)
+#define ISPRSZ_VFILT98			(0x078)
+#define ISPRSZ_VFILT1110		(0x07C)
+#define ISPRSZ_VFILT1312		(0x080)
+#define ISPRSZ_VFILT1514		(0x084)
+#define ISPRSZ_VFILT1716		(0x088)
+#define ISPRSZ_VFILT1918		(0x08C)
+#define ISPRSZ_VFILT2120		(0x090)
+#define ISPRSZ_VFILT2322		(0x094)
+#define ISPRSZ_VFILT2524		(0x098)
+#define ISPRSZ_VFILT2726		(0x09C)
+#define ISPRSZ_VFILT2928		(0x0A0)
+#define ISPRSZ_VFILT3130		(0x0A4)
+#define ISPRSZ_YENH			(0x0A8)
+
+#define ISP_INT_CLR			0xFF113F11
+#define ISPPRV_PCR_EN			1
+#define ISPPRV_PCR_BUSY			(1 << 1)
+#define ISPPRV_PCR_SOURCE		(1 << 2)
+#define ISPPRV_PCR_ONESHOT		(1 << 3)
+#define ISPPRV_PCR_WIDTH		(1 << 4)
+#define ISPPRV_PCR_INVALAW		(1 << 5)
+#define ISPPRV_PCR_DRKFEN		(1 << 6)
+#define ISPPRV_PCR_DRKFCAP		(1 << 7)
+#define ISPPRV_PCR_HMEDEN		(1 << 8)
+#define ISPPRV_PCR_NFEN			(1 << 9)
+#define ISPPRV_PCR_CFAEN		(1 << 10)
+#define ISPPRV_PCR_CFAFMT_SHIFT		11
+#define ISPPRV_PCR_CFAFMT_MASK		0x7800
+#define ISPPRV_PCR_CFAFMT_BAYER		(0 << 11)
+#define ISPPRV_PCR_CFAFMT_SONYVGA	(1 << 11)
+#define ISPPRV_PCR_CFAFMT_RGBFOVEON	(2 << 11)
+#define ISPPRV_PCR_CFAFMT_DNSPL		(3 << 11)
+#define ISPPRV_PCR_CFAFMT_HONEYCOMB	(4 << 11)
+#define ISPPRV_PCR_CFAFMT_RRGGBBFOVEON	(5 << 11)
+#define ISPPRV_PCR_YNENHEN		(1 << 15)
+#define ISPPRV_PCR_SUPEN		(1 << 16)
+#define ISPPRV_PCR_YCPOS_SHIFT		17
+#define ISPPRV_PCR_YCPOS_YCrYCb		(0 << 17)
+#define ISPPRV_PCR_YCPOS_YCbYCr		(1 << 17)
+#define ISPPRV_PCR_YCPOS_CbYCrY		(2 << 17)
+#define ISPPRV_PCR_YCPOS_CrYCbY		(3 << 17)
+#define ISPPRV_PCR_RSZPORT		(1 << 19)
+#define ISPPRV_PCR_SDRPORT		(1 << 20)
+#define ISPPRV_PCR_SCOMP_EN		(1 << 21)
+#define ISPPRV_PCR_SCOMP_SFT_SHIFT	(22)
+#define ISPPRV_PCR_SCOMP_SFT_MASK	(7 << 22)
+#define ISPPRV_PCR_GAMMA_BYPASS		(1 << 26)
+#define ISPPRV_PCR_DCOREN		(1 << 27)
+#define ISPPRV_PCR_DCCOUP		(1 << 28)
+#define ISPPRV_PCR_DRK_FAIL		(1 << 31)
+
+#define ISPPRV_HORZ_INFO_EPH_SHIFT	0
+#define ISPPRV_HORZ_INFO_EPH_MASK	0x3fff
+#define ISPPRV_HORZ_INFO_SPH_SHIFT	16
+#define ISPPRV_HORZ_INFO_SPH_MASK	0x3fff0
+
+#define ISPPRV_VERT_INFO_ELV_SHIFT	0
+#define ISPPRV_VERT_INFO_ELV_MASK	0x3fff
+#define ISPPRV_VERT_INFO_SLV_SHIFT	16
+#define ISPPRV_VERT_INFO_SLV_MASK	0x3fff0
+
+#define ISPPRV_AVE_EVENDIST_SHIFT	2
+#define ISPPRV_AVE_EVENDIST_1		0x0
+#define ISPPRV_AVE_EVENDIST_2		0x1
+#define ISPPRV_AVE_EVENDIST_3		0x2
+#define ISPPRV_AVE_EVENDIST_4		0x3
+#define ISPPRV_AVE_ODDDIST_SHIFT	4
+#define ISPPRV_AVE_ODDDIST_1		0x0
+#define ISPPRV_AVE_ODDDIST_2		0x1
+#define ISPPRV_AVE_ODDDIST_3		0x2
+#define ISPPRV_AVE_ODDDIST_4		0x3
+
+#define ISPPRV_HMED_THRESHOLD_SHIFT	0
+#define ISPPRV_HMED_EVENDIST		(1 << 8)
+#define ISPPRV_HMED_ODDDIST		(1 << 9)
+
+#define ISPPRV_WBGAIN_COEF0_SHIFT	0
+#define ISPPRV_WBGAIN_COEF1_SHIFT	8
+#define ISPPRV_WBGAIN_COEF2_SHIFT	16
+#define ISPPRV_WBGAIN_COEF3_SHIFT	24
+
+#define ISPPRV_WBSEL_COEF0		0x0
+#define ISPPRV_WBSEL_COEF1		0x1
+#define ISPPRV_WBSEL_COEF2		0x2
+#define ISPPRV_WBSEL_COEF3		0x3
+
+#define ISPPRV_WBSEL_N0_0_SHIFT		0
+#define ISPPRV_WBSEL_N0_1_SHIFT		2
+#define ISPPRV_WBSEL_N0_2_SHIFT		4
+#define ISPPRV_WBSEL_N0_3_SHIFT		6
+#define ISPPRV_WBSEL_N1_0_SHIFT		8
+#define ISPPRV_WBSEL_N1_1_SHIFT		10
+#define ISPPRV_WBSEL_N1_2_SHIFT		12
+#define ISPPRV_WBSEL_N1_3_SHIFT		14
+#define ISPPRV_WBSEL_N2_0_SHIFT		16
+#define ISPPRV_WBSEL_N2_1_SHIFT		18
+#define ISPPRV_WBSEL_N2_2_SHIFT		20
+#define ISPPRV_WBSEL_N2_3_SHIFT		22
+#define ISPPRV_WBSEL_N3_0_SHIFT		24
+#define ISPPRV_WBSEL_N3_1_SHIFT		26
+#define ISPPRV_WBSEL_N3_2_SHIFT		28
+#define ISPPRV_WBSEL_N3_3_SHIFT		30
+
+#define ISPPRV_CFA_GRADTH_HOR_SHIFT	0
+#define ISPPRV_CFA_GRADTH_VER_SHIFT	8
+
+#define ISPPRV_BLKADJOFF_B_SHIFT	0
+#define ISPPRV_BLKADJOFF_G_SHIFT	8
+#define ISPPRV_BLKADJOFF_R_SHIFT	16
+
+#define ISPPRV_RGB_MAT1_MTX_RR_SHIFT	0
+#define ISPPRV_RGB_MAT1_MTX_GR_SHIFT	16
+
+#define ISPPRV_RGB_MAT2_MTX_BR_SHIFT	0
+#define ISPPRV_RGB_MAT2_MTX_RG_SHIFT	16
+
+#define ISPPRV_RGB_MAT3_MTX_GG_SHIFT	0
+#define ISPPRV_RGB_MAT3_MTX_BG_SHIFT	16
+
+#define ISPPRV_RGB_MAT4_MTX_RB_SHIFT	0
+#define ISPPRV_RGB_MAT4_MTX_GB_SHIFT	16
+
+#define ISPPRV_RGB_MAT5_MTX_BB_SHIFT	0
+
+#define ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT	0
+#define ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT	16
+
+#define ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT	0
+
+#define ISPPRV_CSC0_RY_SHIFT		0
+#define ISPPRV_CSC0_GY_SHIFT		10
+#define ISPPRV_CSC0_BY_SHIFT		20
+
+#define ISPPRV_CSC1_RCB_SHIFT		0
+#define ISPPRV_CSC1_GCB_SHIFT		10
+#define ISPPRV_CSC1_BCB_SHIFT		20
+
+#define ISPPRV_CSC2_RCR_SHIFT		0
+#define ISPPRV_CSC2_GCR_SHIFT		10
+#define ISPPRV_CSC2_BCR_SHIFT		20
+
+#define ISPPRV_CSC_OFFSET_CR_SHIFT	0
+#define ISPPRV_CSC_OFFSET_CB_SHIFT	8
+#define ISPPRV_CSC_OFFSET_Y_SHIFT	16
+
+#define ISPPRV_CNT_BRT_BRT_SHIFT	0
+#define ISPPRV_CNT_BRT_CNT_SHIFT	8
+
+#define ISPPRV_CONTRAST_MAX		0x10
+#define ISPPRV_CONTRAST_MIN		0xFF
+#define ISPPRV_BRIGHT_MIN		0x00
+#define ISPPRV_BRIGHT_MAX		0xFF
+
+#define ISPPRV_CSUP_CSUPG_SHIFT		0
+#define ISPPRV_CSUP_THRES_SHIFT		8
+#define ISPPRV_CSUP_HPYF_SHIFT		16
+
+#define ISPPRV_SETUP_YC_MINC_SHIFT	0
+#define ISPPRV_SETUP_YC_MAXC_SHIFT	8
+#define ISPPRV_SETUP_YC_MINY_SHIFT	16
+#define ISPPRV_SETUP_YC_MAXY_SHIFT	24
+#define ISPPRV_YC_MAX			0xFF
+#define ISPPRV_YC_MIN			0x0
+
+/* Define bit fields within selected registers */
+#define ISP_REVISION_SHIFT			0
+
+#define ISP_SYSCONFIG_AUTOIDLE			(1 << 0)
+#define ISP_SYSCONFIG_SOFTRESET			(1 << 1)
+#define ISP_SYSCONFIG_MIDLEMODE_SHIFT		12
+#define ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY	0x0
+#define ISP_SYSCONFIG_MIDLEMODE_NOSTANBY	0x1
+#define ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY	0x2
+
+#define ISP_SYSSTATUS_RESETDONE			0
+
+#define IRQ0ENABLE_CSIA_IRQ			(1 << 0)
+#define IRQ0ENABLE_CSIC_IRQ			(1 << 1)
+#define IRQ0ENABLE_CCP2_LCM_IRQ			(1 << 3)
+#define IRQ0ENABLE_CCP2_LC0_IRQ			(1 << 4)
+#define IRQ0ENABLE_CCP2_LC1_IRQ			(1 << 5)
+#define IRQ0ENABLE_CCP2_LC2_IRQ			(1 << 6)
+#define IRQ0ENABLE_CCP2_LC3_IRQ			(1 << 7)
+#define IRQ0ENABLE_CSIB_IRQ			(IRQ0ENABLE_CCP2_LCM_IRQ | \
+						IRQ0ENABLE_CCP2_LC0_IRQ | \
+						IRQ0ENABLE_CCP2_LC1_IRQ | \
+						IRQ0ENABLE_CCP2_LC2_IRQ | \
+						IRQ0ENABLE_CCP2_LC3_IRQ)
+
+#define IRQ0ENABLE_CCDC_VD0_IRQ			(1 << 8)
+#define IRQ0ENABLE_CCDC_VD1_IRQ			(1 << 9)
+#define IRQ0ENABLE_CCDC_VD2_IRQ			(1 << 10)
+#define IRQ0ENABLE_CCDC_ERR_IRQ			(1 << 11)
+#define IRQ0ENABLE_H3A_AF_DONE_IRQ		(1 << 12)
+#define IRQ0ENABLE_H3A_AWB_DONE_IRQ		(1 << 13)
+#define IRQ0ENABLE_HIST_DONE_IRQ		(1 << 16)
+#define IRQ0ENABLE_CCDC_LSC_DONE_IRQ		(1 << 17)
+#define IRQ0ENABLE_CCDC_LSC_PREF_COMP_IRQ	(1 << 18)
+#define IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ	(1 << 19)
+#define IRQ0ENABLE_PRV_DONE_IRQ			(1 << 20)
+#define IRQ0ENABLE_RSZ_DONE_IRQ			(1 << 24)
+#define IRQ0ENABLE_OVF_IRQ			(1 << 25)
+#define IRQ0ENABLE_PING_IRQ			(1 << 26)
+#define IRQ0ENABLE_PONG_IRQ			(1 << 27)
+#define IRQ0ENABLE_MMU_ERR_IRQ			(1 << 28)
+#define IRQ0ENABLE_OCP_ERR_IRQ			(1 << 29)
+#define IRQ0ENABLE_SEC_ERR_IRQ			(1 << 30)
+#define IRQ0ENABLE_HS_VS_IRQ			(1 << 31)
+
+#define IRQ0STATUS_CSIA_IRQ			(1 << 0)
+#define IRQ0STATUS_CSI2C_IRQ			(1 << 1)
+#define IRQ0STATUS_CCP2_LCM_IRQ			(1 << 3)
+#define IRQ0STATUS_CCP2_LC0_IRQ			(1 << 4)
+#define IRQ0STATUS_CSIB_IRQ			(IRQ0STATUS_CCP2_LCM_IRQ | \
+						IRQ0STATUS_CCP2_LC0_IRQ)
+
+#define IRQ0STATUS_CSIB_LC1_IRQ			(1 << 5)
+#define IRQ0STATUS_CSIB_LC2_IRQ			(1 << 6)
+#define IRQ0STATUS_CSIB_LC3_IRQ			(1 << 7)
+#define IRQ0STATUS_CCDC_VD0_IRQ			(1 << 8)
+#define IRQ0STATUS_CCDC_VD1_IRQ			(1 << 9)
+#define IRQ0STATUS_CCDC_VD2_IRQ			(1 << 10)
+#define IRQ0STATUS_CCDC_ERR_IRQ			(1 << 11)
+#define IRQ0STATUS_H3A_AF_DONE_IRQ		(1 << 12)
+#define IRQ0STATUS_H3A_AWB_DONE_IRQ		(1 << 13)
+#define IRQ0STATUS_HIST_DONE_IRQ		(1 << 16)
+#define IRQ0STATUS_CCDC_LSC_DONE_IRQ		(1 << 17)
+#define IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ	(1 << 18)
+#define IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ	(1 << 19)
+#define IRQ0STATUS_PRV_DONE_IRQ			(1 << 20)
+#define IRQ0STATUS_RSZ_DONE_IRQ			(1 << 24)
+#define IRQ0STATUS_OVF_IRQ			(1 << 25)
+#define IRQ0STATUS_PING_IRQ			(1 << 26)
+#define IRQ0STATUS_PONG_IRQ			(1 << 27)
+#define IRQ0STATUS_MMU_ERR_IRQ			(1 << 28)
+#define IRQ0STATUS_OCP_ERR_IRQ			(1 << 29)
+#define IRQ0STATUS_SEC_ERR_IRQ			(1 << 30)
+#define IRQ0STATUS_HS_VS_IRQ			(1 << 31)
+
+#define TCTRL_GRESET_LEN			0
+
+#define TCTRL_PSTRB_REPLAY_DELAY		0
+#define TCTRL_PSTRB_REPLAY_COUNTER_SHIFT	25
+
+#define ISPCTRL_PAR_SER_CLK_SEL_PARALLEL	0x0
+#define ISPCTRL_PAR_SER_CLK_SEL_CSIA		0x1
+#define ISPCTRL_PAR_SER_CLK_SEL_CSIB		0x2
+#define ISPCTRL_PAR_SER_CLK_SEL_CSIC		0x3
+#define ISPCTRL_PAR_SER_CLK_SEL_MASK		0x3
+
+#define ISPCTRL_PAR_BRIDGE_SHIFT		2
+#define ISPCTRL_PAR_BRIDGE_DISABLE		(0x0 << 2)
+#define ISPCTRL_PAR_BRIDGE_LENDIAN		(0x2 << 2)
+#define ISPCTRL_PAR_BRIDGE_BENDIAN		(0x3 << 2)
+#define ISPCTRL_PAR_BRIDGE_MASK			(0x3 << 2)
+
+#define ISPCTRL_PAR_CLK_POL_SHIFT		4
+#define ISPCTRL_PAR_CLK_POL_INV			(1 << 4)
+#define ISPCTRL_PING_PONG_EN			(1 << 5)
+#define ISPCTRL_SHIFT_SHIFT			6
+#define ISPCTRL_SHIFT_0				(0x0 << 6)
+#define ISPCTRL_SHIFT_2				(0x1 << 6)
+#define ISPCTRL_SHIFT_4				(0x2 << 6)
+#define ISPCTRL_SHIFT_MASK			(0x3 << 6)
+
+#define ISPCTRL_CCDC_CLK_EN			(1 << 8)
+#define ISPCTRL_SCMP_CLK_EN			(1 << 9)
+#define ISPCTRL_H3A_CLK_EN			(1 << 10)
+#define ISPCTRL_HIST_CLK_EN			(1 << 11)
+#define ISPCTRL_PREV_CLK_EN			(1 << 12)
+#define ISPCTRL_RSZ_CLK_EN			(1 << 13)
+#define ISPCTRL_SYNC_DETECT_SHIFT		14
+#define ISPCTRL_SYNC_DETECT_HSFALL	(0x0 << ISPCTRL_SYNC_DETECT_SHIFT)
+#define ISPCTRL_SYNC_DETECT_HSRISE	(0x1 << ISPCTRL_SYNC_DETECT_SHIFT)
+#define ISPCTRL_SYNC_DETECT_VSFALL	(0x2 << ISPCTRL_SYNC_DETECT_SHIFT)
+#define ISPCTRL_SYNC_DETECT_VSRISE	(0x3 << ISPCTRL_SYNC_DETECT_SHIFT)
+#define ISPCTRL_SYNC_DETECT_MASK	(0x3 << ISPCTRL_SYNC_DETECT_SHIFT)
+
+#define ISPCTRL_CCDC_RAM_EN		(1 << 16)
+#define ISPCTRL_PREV_RAM_EN		(1 << 17)
+#define ISPCTRL_SBL_RD_RAM_EN		(1 << 18)
+#define ISPCTRL_SBL_WR1_RAM_EN		(1 << 19)
+#define ISPCTRL_SBL_WR0_RAM_EN		(1 << 20)
+#define ISPCTRL_SBL_AUTOIDLE		(1 << 21)
+#define ISPCTRL_SBL_SHARED_WPORTC	(1 << 26)
+#define ISPCTRL_SBL_SHARED_RPORTA	(1 << 27)
+#define ISPCTRL_SBL_SHARED_RPORTB	(1 << 28)
+#define ISPCTRL_JPEG_FLUSH		(1 << 30)
+#define ISPCTRL_CCDC_FLUSH		(1 << 31)
+
+#define ISPSECURE_SECUREMODE		0
+
+#define ISPTCTRL_CTRL_DIV_LOW		0x0
+#define ISPTCTRL_CTRL_DIV_HIGH		0x1
+#define ISPTCTRL_CTRL_DIV_BYPASS	0x1F
+
+#define ISPTCTRL_CTRL_DIVA_SHIFT	0
+#define ISPTCTRL_CTRL_DIVA_MASK		(0x1F << ISPTCTRL_CTRL_DIVA_SHIFT)
+
+#define ISPTCTRL_CTRL_DIVB_SHIFT	5
+#define ISPTCTRL_CTRL_DIVB_MASK		(0x1F << ISPTCTRL_CTRL_DIVB_SHIFT)
+
+#define ISPTCTRL_CTRL_DIVC_SHIFT	10
+#define ISPTCTRL_CTRL_DIVC_NOCLOCK	(0x0 << 10)
+
+#define ISPTCTRL_CTRL_SHUTEN		(1 << 21)
+#define ISPTCTRL_CTRL_PSTRBEN		(1 << 22)
+#define ISPTCTRL_CTRL_STRBEN		(1 << 23)
+#define ISPTCTRL_CTRL_SHUTPOL		(1 << 24)
+#define ISPTCTRL_CTRL_STRBPSTRBPOL	(1 << 26)
+
+#define ISPTCTRL_CTRL_INSEL_SHIFT	27
+#define ISPTCTRL_CTRL_INSEL_PARALLEL	(0x0 << 27)
+#define ISPTCTRL_CTRL_INSEL_CSIA	(0x1 << 27)
+#define ISPTCTRL_CTRL_INSEL_CSIB	(0x2 << 27)
+
+#define ISPTCTRL_CTRL_GRESETEn		(1 << 29)
+#define ISPTCTRL_CTRL_GRESETPOL		(1 << 30)
+#define ISPTCTRL_CTRL_GRESETDIR		(1 << 31)
+
+#define ISPTCTRL_FRAME_SHUT_SHIFT		0
+#define ISPTCTRL_FRAME_PSTRB_SHIFT		6
+#define ISPTCTRL_FRAME_STRB_SHIFT		12
+
+#define ISPCCDC_PID_PREV_SHIFT			0
+#define ISPCCDC_PID_CID_SHIFT			8
+#define ISPCCDC_PID_TID_SHIFT			16
+
+#define ISPCCDC_PCR_EN				1
+#define ISPCCDC_PCR_BUSY			(1 << 1)
+
+#define ISPCCDC_SYN_MODE_VDHDOUT		0x1
+#define ISPCCDC_SYN_MODE_FLDOUT			(1 << 1)
+#define ISPCCDC_SYN_MODE_VDPOL			(1 << 2)
+#define ISPCCDC_SYN_MODE_HDPOL			(1 << 3)
+#define ISPCCDC_SYN_MODE_FLDPOL			(1 << 4)
+#define ISPCCDC_SYN_MODE_EXWEN			(1 << 5)
+#define ISPCCDC_SYN_MODE_DATAPOL		(1 << 6)
+#define ISPCCDC_SYN_MODE_FLDMODE		(1 << 7)
+#define ISPCCDC_SYN_MODE_DATSIZ_MASK		(0x7 << 8)
+#define ISPCCDC_SYN_MODE_DATSIZ_8_16		(0x0 << 8)
+#define ISPCCDC_SYN_MODE_DATSIZ_12		(0x4 << 8)
+#define ISPCCDC_SYN_MODE_DATSIZ_11		(0x5 << 8)
+#define ISPCCDC_SYN_MODE_DATSIZ_10		(0x6 << 8)
+#define ISPCCDC_SYN_MODE_DATSIZ_8		(0x7 << 8)
+#define ISPCCDC_SYN_MODE_PACK8			(1 << 11)
+#define ISPCCDC_SYN_MODE_INPMOD_MASK		(3 << 12)
+#define ISPCCDC_SYN_MODE_INPMOD_RAW		(0 << 12)
+#define ISPCCDC_SYN_MODE_INPMOD_YCBCR16		(1 << 12)
+#define ISPCCDC_SYN_MODE_INPMOD_YCBCR8		(2 << 12)
+#define ISPCCDC_SYN_MODE_LPF			(1 << 14)
+#define ISPCCDC_SYN_MODE_FLDSTAT		(1 << 15)
+#define ISPCCDC_SYN_MODE_VDHDEN			(1 << 16)
+#define ISPCCDC_SYN_MODE_WEN			(1 << 17)
+#define ISPCCDC_SYN_MODE_VP2SDR			(1 << 18)
+#define ISPCCDC_SYN_MODE_SDR2RSZ		(1 << 19)
+
+#define ISPCCDC_HD_VD_WID_VDW_SHIFT		0
+#define ISPCCDC_HD_VD_WID_HDW_SHIFT		16
+
+#define ISPCCDC_PIX_LINES_HLPRF_SHIFT		0
+#define ISPCCDC_PIX_LINES_PPLN_SHIFT		16
+
+#define ISPCCDC_HORZ_INFO_NPH_SHIFT		0
+#define ISPCCDC_HORZ_INFO_NPH_MASK		0xFFFF8000
+#define ISPCCDC_HORZ_INFO_SPH_MASK		0x1000FFFF
+#define ISPCCDC_HORZ_INFO_SPH_SHIFT		16
+
+#define ISPCCDC_VERT_START_SLV0_SHIFT		16
+#define ISPCCDC_VERT_START_SLV0_MASK		0x1000FFFF
+#define ISPCCDC_VERT_START_SLV1_SHIFT		0
+
+#define ISPCCDC_VERT_LINES_NLV_MASK		0xFFFF8000
+#define ISPCCDC_VERT_LINES_NLV_SHIFT		0
+
+#define ISPCCDC_CULLING_CULV_SHIFT		0
+#define ISPCCDC_CULLING_CULHODD_SHIFT		16
+#define ISPCCDC_CULLING_CULHEVN_SHIFT		24
+
+#define ISPCCDC_HSIZE_OFF_SHIFT			0
+
+#define ISPCCDC_SDOFST_FINV			(1 << 14)
+#define ISPCCDC_SDOFST_FOFST_1L			0
+#define ISPCCDC_SDOFST_FOFST_4L			(3 << 12)
+#define ISPCCDC_SDOFST_LOFST3_SHIFT		0
+#define ISPCCDC_SDOFST_LOFST2_SHIFT		3
+#define ISPCCDC_SDOFST_LOFST1_SHIFT		6
+#define ISPCCDC_SDOFST_LOFST0_SHIFT		9
+#define EVENEVEN				1
+#define ODDEVEN					2
+#define EVENODD					3
+#define ODDODD					4
+
+#define ISPCCDC_CLAMP_OBGAIN_SHIFT		0
+#define ISPCCDC_CLAMP_OBST_SHIFT		10
+#define ISPCCDC_CLAMP_OBSLN_SHIFT		25
+#define ISPCCDC_CLAMP_OBSLEN_SHIFT		28
+#define ISPCCDC_CLAMP_CLAMPEN			(1 << 31)
+
+#define ISPCCDC_COLPTN_R_Ye			0x0
+#define ISPCCDC_COLPTN_Gr_Cy			0x1
+#define ISPCCDC_COLPTN_Gb_G			0x2
+#define ISPCCDC_COLPTN_B_Mg			0x3
+#define ISPCCDC_COLPTN_CP0PLC0_SHIFT		0
+#define ISPCCDC_COLPTN_CP0PLC1_SHIFT		2
+#define ISPCCDC_COLPTN_CP0PLC2_SHIFT		4
+#define ISPCCDC_COLPTN_CP0PLC3_SHIFT		6
+#define ISPCCDC_COLPTN_CP1PLC0_SHIFT		8
+#define ISPCCDC_COLPTN_CP1PLC1_SHIFT		10
+#define ISPCCDC_COLPTN_CP1PLC2_SHIFT		12
+#define ISPCCDC_COLPTN_CP1PLC3_SHIFT		14
+#define ISPCCDC_COLPTN_CP2PLC0_SHIFT		16
+#define ISPCCDC_COLPTN_CP2PLC1_SHIFT		18
+#define ISPCCDC_COLPTN_CP2PLC2_SHIFT		20
+#define ISPCCDC_COLPTN_CP2PLC3_SHIFT		22
+#define ISPCCDC_COLPTN_CP3PLC0_SHIFT		24
+#define ISPCCDC_COLPTN_CP3PLC1_SHIFT		26
+#define ISPCCDC_COLPTN_CP3PLC2_SHIFT		28
+#define ISPCCDC_COLPTN_CP3PLC3_SHIFT		30
+
+#define ISPCCDC_BLKCMP_B_MG_SHIFT		0
+#define ISPCCDC_BLKCMP_GB_G_SHIFT		8
+#define ISPCCDC_BLKCMP_GR_CY_SHIFT		16
+#define ISPCCDC_BLKCMP_R_YE_SHIFT		24
+
+#define ISPCCDC_FPC_FPNUM_SHIFT			0
+#define ISPCCDC_FPC_FPCEN			(1 << 15)
+#define ISPCCDC_FPC_FPERR			(1 << 16)
+
+#define ISPCCDC_VDINT_1_SHIFT			0
+#define ISPCCDC_VDINT_0_SHIFT			16
+#define ISPCCDC_VDINT_0_MASK			0x7FFF
+#define ISPCCDC_VDINT_1_MASK			0x7FFF
+
+#define ISPCCDC_ALAW_GWDI_12_3			(0x3 << 0)
+#define ISPCCDC_ALAW_GWDI_11_2			(0x4 << 0)
+#define ISPCCDC_ALAW_GWDI_10_1			(0x5 << 0)
+#define ISPCCDC_ALAW_GWDI_9_0			(0x6 << 0)
+#define ISPCCDC_ALAW_CCDTBL			(1 << 3)
+
+#define ISPCCDC_REC656IF_R656ON			1
+#define ISPCCDC_REC656IF_ECCFVH			(1 << 1)
+
+#define ISPCCDC_CFG_BW656			(1 << 5)
+#define ISPCCDC_CFG_FIDMD_SHIFT			6
+#define ISPCCDC_CFG_WENLOG			(1 << 8)
+#define ISPCCDC_CFG_WENLOG_AND			(0 << 8)
+#define ISPCCDC_CFG_WENLOG_OR		(1 << 8)
+#define ISPCCDC_CFG_Y8POS			(1 << 11)
+#define ISPCCDC_CFG_BSWD			(1 << 12)
+#define ISPCCDC_CFG_MSBINVI			(1 << 13)
+#define ISPCCDC_CFG_VDLC			(1 << 15)
+
+#define ISPCCDC_FMTCFG_FMTEN			0x1
+#define ISPCCDC_FMTCFG_LNALT			(1 << 1)
+#define ISPCCDC_FMTCFG_LNUM_SHIFT		2
+#define ISPCCDC_FMTCFG_PLEN_ODD_SHIFT		4
+#define ISPCCDC_FMTCFG_PLEN_EVEN_SHIFT		8
+#define ISPCCDC_FMTCFG_VPIN_MASK		0x00007000
+#define ISPCCDC_FMTCFG_VPIN_12_3		(0x3 << 12)
+#define ISPCCDC_FMTCFG_VPIN_11_2		(0x4 << 12)
+#define ISPCCDC_FMTCFG_VPIN_10_1		(0x5 << 12)
+#define ISPCCDC_FMTCFG_VPIN_9_0			(0x6 << 12)
+#define ISPCCDC_FMTCFG_VPEN			(1 << 15)
+
+#define ISPCCDC_FMTCFG_VPIF_FRQ_MASK		0x003f0000
+#define ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT		16
+#define ISPCCDC_FMTCFG_VPIF_FRQ_BY2		(0x0 << 16)
+#define ISPCCDC_FMTCFG_VPIF_FRQ_BY3		(0x1 << 16)
+#define ISPCCDC_FMTCFG_VPIF_FRQ_BY4		(0x2 << 16)
+#define ISPCCDC_FMTCFG_VPIF_FRQ_BY5		(0x3 << 16)
+#define ISPCCDC_FMTCFG_VPIF_FRQ_BY6		(0x4 << 16)
+
+#define ISPCCDC_FMT_HORZ_FMTLNH_SHIFT		0
+#define ISPCCDC_FMT_HORZ_FMTSPH_SHIFT		16
+
+#define ISPCCDC_FMT_VERT_FMTLNV_SHIFT		0
+#define ISPCCDC_FMT_VERT_FMTSLV_SHIFT		16
+
+#define ISPCCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF0000
+#define ISPCCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
+
+#define ISPCCDC_FMT_VERT_FMTSLV_MASK		0x1FFF0000
+#define ISPCCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
+
+#define ISPCCDC_VP_OUT_HORZ_ST_SHIFT		0
+#define ISPCCDC_VP_OUT_HORZ_NUM_SHIFT		4
+#define ISPCCDC_VP_OUT_VERT_NUM_SHIFT		17
+
+#define ISPRSZ_PID_PREV_SHIFT			0
+#define ISPRSZ_PID_CID_SHIFT			8
+#define ISPRSZ_PID_TID_SHIFT			16
+
+#define ISPRSZ_PCR_ENABLE			(1 << 0)
+#define ISPRSZ_PCR_BUSY				(1 << 1)
+#define ISPRSZ_PCR_ONESHOT			(1 << 2)
+
+#define ISPRSZ_CNT_HRSZ_SHIFT			0
+#define ISPRSZ_CNT_HRSZ_MASK			\
+	(0x3FF << ISPRSZ_CNT_HRSZ_SHIFT)
+#define ISPRSZ_CNT_VRSZ_SHIFT			10
+#define ISPRSZ_CNT_VRSZ_MASK			\
+	(0x3FF << ISPRSZ_CNT_VRSZ_SHIFT)
+#define ISPRSZ_CNT_HSTPH_SHIFT			20
+#define ISPRSZ_CNT_HSTPH_MASK			(0x7 << ISPRSZ_CNT_HSTPH_SHIFT)
+#define ISPRSZ_CNT_VSTPH_SHIFT			23
+#define ISPRSZ_CNT_VSTPH_MASK			(0x7 << ISPRSZ_CNT_VSTPH_SHIFT)
+#define ISPRSZ_CNT_YCPOS			(1 << 26)
+#define ISPRSZ_CNT_INPTYP			(1 << 27)
+#define ISPRSZ_CNT_INPSRC			(1 << 28)
+#define ISPRSZ_CNT_CBILIN			(1 << 29)
+
+#define ISPRSZ_OUT_SIZE_HORZ_SHIFT		0
+#define ISPRSZ_OUT_SIZE_HORZ_MASK		\
+	(0xFFF << ISPRSZ_OUT_SIZE_HORZ_SHIFT)
+#define ISPRSZ_OUT_SIZE_VERT_SHIFT		16
+#define ISPRSZ_OUT_SIZE_VERT_MASK		\
+	(0xFFF << ISPRSZ_OUT_SIZE_VERT_SHIFT)
+
+#define ISPRSZ_IN_START_HORZ_ST_SHIFT		0
+#define ISPRSZ_IN_START_HORZ_ST_MASK		\
+	(0x1FFF << ISPRSZ_IN_START_HORZ_ST_SHIFT)
+#define ISPRSZ_IN_START_VERT_ST_SHIFT		16
+#define ISPRSZ_IN_START_VERT_ST_MASK		\
+	(0x1FFF << ISPRSZ_IN_START_VERT_ST_SHIFT)
+
+#define ISPRSZ_IN_SIZE_HORZ_SHIFT		0
+#define ISPRSZ_IN_SIZE_HORZ_MASK		\
+	(0x1FFF << ISPRSZ_IN_SIZE_HORZ_SHIFT)
+#define ISPRSZ_IN_SIZE_VERT_SHIFT		16
+#define ISPRSZ_IN_SIZE_VERT_MASK		\
+	(0x1FFF << ISPRSZ_IN_SIZE_VERT_SHIFT)
+
+#define ISPRSZ_SDR_INADD_ADDR_SHIFT		0
+#define ISPRSZ_SDR_INADD_ADDR_MASK		0xFFFFFFFF
+
+#define ISPRSZ_SDR_INOFF_OFFSET_SHIFT		0
+#define ISPRSZ_SDR_INOFF_OFFSET_MASK		\
+	(0xFFFF << ISPRSZ_SDR_INOFF_OFFSET_SHIFT)
+
+#define ISPRSZ_SDR_OUTADD_ADDR_SHIFT		0
+#define ISPRSZ_SDR_OUTADD_ADDR_MASK		0xFFFFFFFF
+
+
+#define ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT		0
+#define ISPRSZ_SDR_OUTOFF_OFFSET_MASK		\
+	(0xFFFF << ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT)
+
+#define ISPRSZ_HFILT_COEF0_SHIFT		0
+#define ISPRSZ_HFILT_COEF0_MASK			\
+	(0x3FF << ISPRSZ_HFILT_COEF0_SHIFT)
+#define ISPRSZ_HFILT_COEF1_SHIFT		16
+#define ISPRSZ_HFILT_COEF1_MASK			\
+	(0x3FF << ISPRSZ_HFILT_COEF1_SHIFT)
+
+#define ISPRSZ_HFILT32_COEF2_SHIFT		0
+#define ISPRSZ_HFILT32_COEF2_MASK		0x3FF
+#define ISPRSZ_HFILT32_COEF3_SHIFT		16
+#define ISPRSZ_HFILT32_COEF3_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT54_COEF4_SHIFT		0
+#define ISPRSZ_HFILT54_COEF4_MASK		0x3FF
+#define ISPRSZ_HFILT54_COEF5_SHIFT		16
+#define ISPRSZ_HFILT54_COEF5_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT76_COEFF6_SHIFT		0
+#define ISPRSZ_HFILT76_COEFF6_MASK		0x3FF
+#define ISPRSZ_HFILT76_COEFF7_SHIFT		16
+#define ISPRSZ_HFILT76_COEFF7_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT98_COEFF8_SHIFT		0
+#define ISPRSZ_HFILT98_COEFF8_MASK		0x3FF
+#define ISPRSZ_HFILT98_COEFF9_SHIFT		16
+#define ISPRSZ_HFILT98_COEFF9_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT1110_COEF10_SHIFT		0
+#define ISPRSZ_HFILT1110_COEF10_MASK		0x3FF
+#define ISPRSZ_HFILT1110_COEF11_SHIFT		16
+#define ISPRSZ_HFILT1110_COEF11_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT1312_COEFF12_SHIFT		0
+#define ISPRSZ_HFILT1312_COEFF12_MASK		0x3FF
+#define ISPRSZ_HFILT1312_COEFF13_SHIFT		16
+#define ISPRSZ_HFILT1312_COEFF13_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT1514_COEFF14_SHIFT		0
+#define ISPRSZ_HFILT1514_COEFF14_MASK		0x3FF
+#define ISPRSZ_HFILT1514_COEFF15_SHIFT		16
+#define ISPRSZ_HFILT1514_COEFF15_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT1716_COEF16_SHIFT		0
+#define ISPRSZ_HFILT1716_COEF16_MASK		0x3FF
+#define ISPRSZ_HFILT1716_COEF17_SHIFT		16
+#define ISPRSZ_HFILT1716_COEF17_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT1918_COEF18_SHIFT		0
+#define ISPRSZ_HFILT1918_COEF18_MASK		0x3FF
+#define ISPRSZ_HFILT1918_COEF19_SHIFT		16
+#define ISPRSZ_HFILT1918_COEF19_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT2120_COEF20_SHIFT		0
+#define ISPRSZ_HFILT2120_COEF20_MASK		0x3FF
+#define ISPRSZ_HFILT2120_COEF21_SHIFT		16
+#define ISPRSZ_HFILT2120_COEF21_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT2322_COEF22_SHIFT		0
+#define ISPRSZ_HFILT2322_COEF22_MASK		0x3FF
+#define ISPRSZ_HFILT2322_COEF23_SHIFT		16
+#define ISPRSZ_HFILT2322_COEF23_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT2524_COEF24_SHIFT		0
+#define ISPRSZ_HFILT2524_COEF24_MASK		0x3FF
+#define ISPRSZ_HFILT2524_COEF25_SHIFT		16
+#define ISPRSZ_HFILT2524_COEF25_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT2726_COEF26_SHIFT		0
+#define ISPRSZ_HFILT2726_COEF26_MASK		0x3FF
+#define ISPRSZ_HFILT2726_COEF27_SHIFT		16
+#define ISPRSZ_HFILT2726_COEF27_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT2928_COEF28_SHIFT		0
+#define ISPRSZ_HFILT2928_COEF28_MASK		0x3FF
+#define ISPRSZ_HFILT2928_COEF29_SHIFT		16
+#define ISPRSZ_HFILT2928_COEF29_MASK		0x3FF0000
+
+#define ISPRSZ_HFILT3130_COEF30_SHIFT		0
+#define ISPRSZ_HFILT3130_COEF30_MASK		0x3FF
+#define ISPRSZ_HFILT3130_COEF31_SHIFT		16
+#define ISPRSZ_HFILT3130_COEF31_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT_COEF0_SHIFT		0
+#define ISPRSZ_VFILT_COEF0_MASK			\
+	(0x3FF << ISPRSZ_VFILT_COEF0_SHIFT)
+#define ISPRSZ_VFILT_COEF1_SHIFT		16
+#define ISPRSZ_VFILT_COEF1_MASK			\
+	(0x3FF << ISPRSZ_VFILT_COEF1_SHIFT)
+
+#define ISPRSZ_VFILT10_COEF0_SHIFT		0
+#define ISPRSZ_VFILT10_COEF0_MASK		0x3FF
+#define ISPRSZ_VFILT10_COEF1_SHIFT		16
+#define ISPRSZ_VFILT10_COEF1_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT32_COEF2_SHIFT		0
+#define ISPRSZ_VFILT32_COEF2_MASK		0x3FF
+#define ISPRSZ_VFILT32_COEF3_SHIFT		16
+#define ISPRSZ_VFILT32_COEF3_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT54_COEF4_SHIFT		0
+#define ISPRSZ_VFILT54_COEF4_MASK		0x3FF
+#define ISPRSZ_VFILT54_COEF5_SHIFT		16
+#define ISPRSZ_VFILT54_COEF5_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT76_COEFF6_SHIFT		0
+#define ISPRSZ_VFILT76_COEFF6_MASK		0x3FF
+#define ISPRSZ_VFILT76_COEFF7_SHIFT		16
+#define ISPRSZ_VFILT76_COEFF7_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT98_COEFF8_SHIFT		0
+#define ISPRSZ_VFILT98_COEFF8_MASK		0x3FF
+#define ISPRSZ_VFILT98_COEFF9_SHIFT		16
+#define ISPRSZ_VFILT98_COEFF9_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT1110_COEF10_SHIFT		0
+#define ISPRSZ_VFILT1110_COEF10_MASK		0x3FF
+#define ISPRSZ_VFILT1110_COEF11_SHIFT		16
+#define ISPRSZ_VFILT1110_COEF11_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT1312_COEFF12_SHIFT		0
+#define ISPRSZ_VFILT1312_COEFF12_MASK		0x3FF
+#define ISPRSZ_VFILT1312_COEFF13_SHIFT		16
+#define ISPRSZ_VFILT1312_COEFF13_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT1514_COEFF14_SHIFT		0
+#define ISPRSZ_VFILT1514_COEFF14_MASK		0x3FF
+#define ISPRSZ_VFILT1514_COEFF15_SHIFT		16
+#define ISPRSZ_VFILT1514_COEFF15_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT1716_COEF16_SHIFT		0
+#define ISPRSZ_VFILT1716_COEF16_MASK		0x3FF
+#define ISPRSZ_VFILT1716_COEF17_SHIFT		16
+#define ISPRSZ_VFILT1716_COEF17_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT1918_COEF18_SHIFT		0
+#define ISPRSZ_VFILT1918_COEF18_MASK		0x3FF
+#define ISPRSZ_VFILT1918_COEF19_SHIFT		16
+#define ISPRSZ_VFILT1918_COEF19_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT2120_COEF20_SHIFT		0
+#define ISPRSZ_VFILT2120_COEF20_MASK		0x3FF
+#define ISPRSZ_VFILT2120_COEF21_SHIFT		16
+#define ISPRSZ_VFILT2120_COEF21_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT2322_COEF22_SHIFT		0
+#define ISPRSZ_VFILT2322_COEF22_MASK		0x3FF
+#define ISPRSZ_VFILT2322_COEF23_SHIFT		16
+#define ISPRSZ_VFILT2322_COEF23_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT2524_COEF24_SHIFT		0
+#define ISPRSZ_VFILT2524_COEF24_MASK		0x3FF
+#define ISPRSZ_VFILT2524_COEF25_SHIFT		16
+#define ISPRSZ_VFILT2524_COEF25_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT2726_COEF26_SHIFT		0
+#define ISPRSZ_VFILT2726_COEF26_MASK		0x3FF
+#define ISPRSZ_VFILT2726_COEF27_SHIFT		16
+#define ISPRSZ_VFILT2726_COEF27_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT2928_COEF28_SHIFT		0
+#define ISPRSZ_VFILT2928_COEF28_MASK		0x3FF
+#define ISPRSZ_VFILT2928_COEF29_SHIFT		16
+#define ISPRSZ_VFILT2928_COEF29_MASK		0x3FF0000
+
+#define ISPRSZ_VFILT3130_COEF30_SHIFT		0
+#define ISPRSZ_VFILT3130_COEF30_MASK		0x3FF
+#define ISPRSZ_VFILT3130_COEF31_SHIFT		16
+#define ISPRSZ_VFILT3130_COEF31_MASK		0x3FF0000
+
+#define ISPRSZ_YENH_CORE_SHIFT			0
+#define ISPRSZ_YENH_CORE_MASK			\
+	(0xFF << ISPRSZ_YENH_CORE_SHIFT)
+#define ISPRSZ_YENH_SLOP_SHIFT			8
+#define ISPRSZ_YENH_SLOP_MASK			\
+	(0xF << ISPRSZ_YENH_SLOP_SHIFT)
+#define ISPRSZ_YENH_GAIN_SHIFT			12
+#define ISPRSZ_YENH_GAIN_MASK			\
+	(0xF << ISPRSZ_YENH_GAIN_SHIFT)
+#define ISPRSZ_YENH_ALGO_SHIFT			16
+#define ISPRSZ_YENH_ALGO_MASK			\
+	(0x3 << ISPRSZ_YENH_ALGO_SHIFT)
+
+#define ISPH3A_PCR_AEW_ALAW_EN_SHIFT		1
+#define ISPH3A_PCR_AF_MED_TH_SHIFT		3
+#define ISPH3A_PCR_AF_RGBPOS_SHIFT		11
+#define ISPH3A_PCR_AEW_AVE2LMT_SHIFT		22
+#define ISPH3A_PCR_AEW_AVE2LMT_MASK		0xFFC00000
+#define ISPH3A_PCR_BUSYAF			(1 << 15)
+#define ISPH3A_PCR_BUSYAEAWB			(1 << 18)
+
+#define ISPH3A_AEWWIN1_WINHC_SHIFT		0
+#define ISPH3A_AEWWIN1_WINHC_MASK		0x3F
+#define ISPH3A_AEWWIN1_WINVC_SHIFT		6
+#define ISPH3A_AEWWIN1_WINVC_MASK		0x1FC0
+#define ISPH3A_AEWWIN1_WINW_SHIFT		13
+#define ISPH3A_AEWWIN1_WINW_MASK		0xFE000
+#define ISPH3A_AEWWIN1_WINH_SHIFT		24
+#define ISPH3A_AEWWIN1_WINH_MASK		0x7F000000
+
+#define ISPH3A_AEWINSTART_WINSH_SHIFT		0
+#define ISPH3A_AEWINSTART_WINSH_MASK		0x0FFF
+#define ISPH3A_AEWINSTART_WINSV_SHIFT		16
+#define ISPH3A_AEWINSTART_WINSV_MASK		0x0FFF0000
+
+#define ISPH3A_AEWINBLK_WINH_SHIFT		0
+#define ISPH3A_AEWINBLK_WINH_MASK		0x7F
+#define ISPH3A_AEWINBLK_WINSV_SHIFT		16
+#define ISPH3A_AEWINBLK_WINSV_MASK		0x0FFF0000
+
+#define ISPH3A_AEWSUBWIN_AEWINCH_SHIFT		0
+#define ISPH3A_AEWSUBWIN_AEWINCH_MASK		0x0F
+#define ISPH3A_AEWSUBWIN_AEWINCV_SHIFT		8
+#define ISPH3A_AEWSUBWIN_AEWINCV_MASK		0x0F00
+
+#define ISPHIST_PCR_ENABLE_SHIFT	0
+#define ISPHIST_PCR_ENABLE_MASK		0x01
+#define ISPHIST_PCR_ENABLE		(1 << ISPHIST_PCR_ENABLE_SHIFT)
+#define ISPHIST_PCR_BUSY		0x02
+
+#define ISPHIST_CNT_DATASIZE_SHIFT	8
+#define ISPHIST_CNT_DATASIZE_MASK	0x0100
+#define ISPHIST_CNT_CLEAR_SHIFT		7
+#define ISPHIST_CNT_CLEAR_MASK		0x080
+#define ISPHIST_CNT_CLEAR		(1 << ISPHIST_CNT_CLEAR_SHIFT)
+#define ISPHIST_CNT_CFA_SHIFT		6
+#define ISPHIST_CNT_CFA_MASK		0x040
+#define ISPHIST_CNT_BINS_SHIFT		4
+#define ISPHIST_CNT_BINS_MASK		0x030
+#define ISPHIST_CNT_SOURCE_SHIFT	3
+#define ISPHIST_CNT_SOURCE_MASK		0x08
+#define ISPHIST_CNT_SHIFT_SHIFT		0
+#define ISPHIST_CNT_SHIFT_MASK		0x07
+
+#define ISPHIST_WB_GAIN_WG00_SHIFT	24
+#define ISPHIST_WB_GAIN_WG00_MASK	0xFF000000
+#define ISPHIST_WB_GAIN_WG01_SHIFT	16
+#define ISPHIST_WB_GAIN_WG01_MASK	0xFF0000
+#define ISPHIST_WB_GAIN_WG02_SHIFT	8
+#define ISPHIST_WB_GAIN_WG02_MASK	0xFF00
+#define ISPHIST_WB_GAIN_WG03_SHIFT	0
+#define ISPHIST_WB_GAIN_WG03_MASK	0xFF
+
+#define ISPHIST_REG_START_END_MASK		0x3FFF
+#define ISPHIST_REG_START_SHIFT			16
+#define ISPHIST_REG_END_SHIFT			0
+#define ISPHIST_REG_START_MASK			(ISPHIST_REG_START_END_MASK << \
+						 ISPHIST_REG_START_SHIFT)
+#define ISPHIST_REG_END_MASK			(ISPHIST_REG_START_END_MASK << \
+						 ISPHIST_REG_END_SHIFT)
+
+#define ISPHIST_REG_MASK			(ISPHIST_REG_START_MASK | \
+						 ISPHIST_REG_END_MASK)
+
+#define ISPHIST_ADDR_SHIFT			0
+#define ISPHIST_ADDR_MASK			0x3FF
+
+#define ISPHIST_DATA_SHIFT			0
+#define ISPHIST_DATA_MASK			0xFFFFF
+
+#define ISPHIST_RADD_SHIFT			0
+#define ISPHIST_RADD_MASK			0xFFFFFFFF
+
+#define ISPHIST_RADD_OFF_SHIFT			0
+#define ISPHIST_RADD_OFF_MASK			0xFFFF
+
+#define ISPHIST_HV_INFO_HSIZE_SHIFT		16
+#define ISPHIST_HV_INFO_HSIZE_MASK		0x3FFF0000
+#define ISPHIST_HV_INFO_VSIZE_SHIFT		0
+#define ISPHIST_HV_INFO_VSIZE_MASK		0x3FFF
+
+#define ISPHIST_HV_INFO_MASK			0x3FFF3FFF
+
+#define ISPCCDC_LSC_ENABLE			1
+#define ISPCCDC_LSC_BUSY			(1 << 7)
+#define ISPCCDC_LSC_GAIN_MODE_N_MASK		0x700
+#define ISPCCDC_LSC_GAIN_MODE_N_SHIFT		8
+#define ISPCCDC_LSC_GAIN_MODE_M_MASK		0x3800
+#define ISPCCDC_LSC_GAIN_MODE_M_SHIFT		12
+#define ISPCCDC_LSC_GAIN_FORMAT_MASK		0xE
+#define ISPCCDC_LSC_GAIN_FORMAT_SHIFT		1
+#define ISPCCDC_LSC_AFTER_REFORMATTER_MASK	(1<<6)
+
+#define ISPCCDC_LSC_INITIAL_X_MASK		0x3F
+#define ISPCCDC_LSC_INITIAL_X_SHIFT		0
+#define ISPCCDC_LSC_INITIAL_Y_MASK		0x3F0000
+#define ISPCCDC_LSC_INITIAL_Y_SHIFT		16
+
+/* -----------------------------------------------------------------------------
+ * CSI2 receiver registers (ES2.0)
+ */
+
+#define ISPCSI2_REVISION			(0x000)
+#define ISPCSI2_SYSCONFIG			(0x010)
+#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT	12
+#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK	\
+	(0x3 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_FORCE	\
+	(0x0 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO	\
+	(0x1 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART	\
+	(0x2 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT)
+#define ISPCSI2_SYSCONFIG_SOFT_RESET		(1 << 1)
+#define ISPCSI2_SYSCONFIG_AUTO_IDLE		(1 << 0)
+
+#define ISPCSI2_SYSSTATUS			(0x014)
+#define ISPCSI2_SYSSTATUS_RESET_DONE		(1 << 0)
+
+#define ISPCSI2_IRQSTATUS			(0x018)
+#define ISPCSI2_IRQSTATUS_OCP_ERR_IRQ		(1 << 14)
+#define ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ	(1 << 13)
+#define ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ	(1 << 12)
+#define ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ	(1 << 11)
+#define ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ	(1 << 10)
+#define ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ	(1 << 9)
+#define ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ		(1 << 8)
+#define ISPCSI2_IRQSTATUS_CONTEXT(n)		(1 << (n))
+
+#define ISPCSI2_IRQENABLE			(0x01c)
+#define ISPCSI2_CTRL				(0x040)
+#define ISPCSI2_CTRL_VP_CLK_EN			(1 << 15)
+#define ISPCSI2_CTRL_VP_ONLY_EN			(1 << 11)
+#define ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT		8
+#define ISPCSI2_CTRL_VP_OUT_CTRL_MASK		\
+	(3 << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT)
+#define ISPCSI2_CTRL_DBG_EN			(1 << 7)
+#define ISPCSI2_CTRL_BURST_SIZE_SHIFT		5
+#define ISPCSI2_CTRL_BURST_SIZE_MASK		\
+	(3 << ISPCSI2_CTRL_BURST_SIZE_SHIFT)
+#define ISPCSI2_CTRL_FRAME			(1 << 3)
+#define ISPCSI2_CTRL_ECC_EN			(1 << 2)
+#define ISPCSI2_CTRL_SECURE			(1 << 1)
+#define ISPCSI2_CTRL_IF_EN			(1 << 0)
+
+#define ISPCSI2_DBG_H				(0x044)
+#define ISPCSI2_GNQ				(0x048)
+#define ISPCSI2_PHY_CFG				(0x050)
+#define ISPCSI2_PHY_CFG_RESET_CTRL		(1 << 30)
+#define ISPCSI2_PHY_CFG_RESET_DONE		(1 << 29)
+#define ISPCSI2_PHY_CFG_PWR_CMD_SHIFT		27
+#define ISPCSI2_PHY_CFG_PWR_CMD_MASK		\
+	(0x3 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_CMD_OFF		\
+	(0x0 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_CMD_ON		\
+	(0x1 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_CMD_ULPW		\
+	(0x2 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT	25
+#define ISPCSI2_PHY_CFG_PWR_STATUS_MASK		\
+	(0x3 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_STATUS_OFF		\
+	(0x0 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_STATUS_ON		\
+	(0x1 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_STATUS_ULPW		\
+	(0x2 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT)
+#define ISPCSI2_PHY_CFG_PWR_AUTO		(1 << 24)
+
+#define ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n)	(3 + ((n) * 4))
+#define ISPCSI2_PHY_CFG_DATA_POL_MASK(n)	\
+	(0x1 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POL_PN(n)		\
+	(0x0 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POL_NP(n)		\
+	(0x1 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n))
+
+#define ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)	((n) * 4)
+#define ISPCSI2_PHY_CFG_DATA_POSITION_MASK(n)	\
+	(0x7 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_NC(n)	\
+	(0x0 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_1(n)	\
+	(0x1 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_2(n)	\
+	(0x2 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_3(n)	\
+	(0x3 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_4(n)	\
+	(0x4 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+#define ISPCSI2_PHY_CFG_DATA_POSITION_5(n)	\
+	(0x5 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n))
+
+#define ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT		3
+#define ISPCSI2_PHY_CFG_CLOCK_POL_MASK		\
+	(0x1 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POL_PN		\
+	(0x0 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POL_NP		\
+	(0x1 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT)
+
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT	0
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK	\
+	(0x7 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_1	\
+	(0x1 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_2	\
+	(0x2 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_3	\
+	(0x3 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_4	\
+	(0x4 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+#define ISPCSI2_PHY_CFG_CLOCK_POSITION_5	\
+	(0x5 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT)
+
+#define ISPCSI2_PHY_IRQSTATUS			(0x054)
+#define ISPCSI2_PHY_IRQSTATUS_STATEALLULPMEXIT	(1 << 26)
+#define ISPCSI2_PHY_IRQSTATUS_STATEALLULPMENTER	(1 << 25)
+#define ISPCSI2_PHY_IRQSTATUS_STATEULPM5	(1 << 24)
+#define ISPCSI2_PHY_IRQSTATUS_STATEULPM4	(1 << 23)
+#define ISPCSI2_PHY_IRQSTATUS_STATEULPM3	(1 << 22)
+#define ISPCSI2_PHY_IRQSTATUS_STATEULPM2	(1 << 21)
+#define ISPCSI2_PHY_IRQSTATUS_STATEULPM1	(1 << 20)
+#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL5	(1 << 19)
+#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL4	(1 << 18)
+#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL3	(1 << 17)
+#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL2	(1 << 16)
+#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL1	(1 << 15)
+#define ISPCSI2_PHY_IRQSTATUS_ERRESC5		(1 << 14)
+#define ISPCSI2_PHY_IRQSTATUS_ERRESC4		(1 << 13)
+#define ISPCSI2_PHY_IRQSTATUS_ERRESC3		(1 << 12)
+#define ISPCSI2_PHY_IRQSTATUS_ERRESC2		(1 << 11)
+#define ISPCSI2_PHY_IRQSTATUS_ERRESC1		(1 << 10)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS5	(1 << 9)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS4	(1 << 8)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS3	(1 << 7)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS2	(1 << 6)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS1	(1 << 5)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS5		(1 << 4)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS4		(1 << 3)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS3		(1 << 2)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS2		(1 << 1)
+#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS1		1
+
+#define ISPCSI2_SHORT_PACKET			(0x05c)
+#define ISPCSI2_PHY_IRQENABLE			(0x060)
+#define ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT	(1 << 26)
+#define ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER	(1 << 25)
+#define ISPCSI2_PHY_IRQENABLE_STATEULPM5	(1 << 24)
+#define ISPCSI2_PHY_IRQENABLE_STATEULPM4	(1 << 23)
+#define ISPCSI2_PHY_IRQENABLE_STATEULPM3	(1 << 22)
+#define ISPCSI2_PHY_IRQENABLE_STATEULPM2	(1 << 21)
+#define ISPCSI2_PHY_IRQENABLE_STATEULPM1	(1 << 20)
+#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL5	(1 << 19)
+#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL4	(1 << 18)
+#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL3	(1 << 17)
+#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL2	(1 << 16)
+#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL1	(1 << 15)
+#define ISPCSI2_PHY_IRQENABLE_ERRESC5		(1 << 14)
+#define ISPCSI2_PHY_IRQENABLE_ERRESC4		(1 << 13)
+#define ISPCSI2_PHY_IRQENABLE_ERRESC3		(1 << 12)
+#define ISPCSI2_PHY_IRQENABLE_ERRESC2		(1 << 11)
+#define ISPCSI2_PHY_IRQENABLE_ERRESC1		(1 << 10)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5	(1 << 9)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4	(1 << 8)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3	(1 << 7)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2	(1 << 6)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1	(1 << 5)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS5		(1 << 4)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS4		(1 << 3)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS3		(1 << 2)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS2		(1 << 1)
+#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS1		(1 << 0)
+
+#define ISPCSI2_DBG_P				(0x068)
+#define ISPCSI2_TIMING				(0x06c)
+#define ISPCSI2_TIMING_FORCE_RX_MODE_IO(n)	(1 << ((16 * ((n) - 1)) + 15))
+#define ISPCSI2_TIMING_STOP_STATE_X16_IO(n)	(1 << ((16 * ((n) - 1)) + 14))
+#define ISPCSI2_TIMING_STOP_STATE_X4_IO(n)	(1 << ((16 * ((n) - 1)) + 13))
+#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n)	(16 * ((n) - 1))
+#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(n)	\
+	(0x1fff << ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n))
+
+#define ISPCSI2_CTX_CTRL1(n)			((0x070) + 0x20 * (n))
+#define ISPCSI2_CTX_CTRL1_COUNT_SHIFT		8
+#define ISPCSI2_CTX_CTRL1_COUNT_MASK		\
+	(0xff << ISPCSI2_CTX_CTRL1_COUNT_SHIFT)
+#define ISPCSI2_CTX_CTRL1_EOF_EN		(1 << 7)
+#define ISPCSI2_CTX_CTRL1_EOL_EN		(1 << 6)
+#define ISPCSI2_CTX_CTRL1_CS_EN			(1 << 5)
+#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK		(1 << 4)
+#define ISPCSI2_CTX_CTRL1_PING_PONG		(1 << 3)
+#define ISPCSI2_CTX_CTRL1_CTX_EN		(1 << 0)
+
+#define ISPCSI2_CTX_CTRL2(n)			((0x074) + 0x20 * (n))
+#define ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT	13
+#define ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK	\
+	(0x3 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT)
+#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT	11
+#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK	\
+	(0x3 <<	ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT)
+#define ISPCSI2_CTX_CTRL2_DPCM_PRED		(1 << 10)
+#define ISPCSI2_CTX_CTRL2_FORMAT_SHIFT		0
+#define ISPCSI2_CTX_CTRL2_FORMAT_MASK		\
+	(0x3ff << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT)
+#define ISPCSI2_CTX_CTRL2_FRAME_SHIFT		16
+#define ISPCSI2_CTX_CTRL2_FRAME_MASK		\
+	(0xffff << ISPCSI2_CTX_CTRL2_FRAME_SHIFT)
+
+#define ISPCSI2_CTX_DAT_OFST(n)			((0x078) + 0x20 * (n))
+#define ISPCSI2_CTX_DAT_OFST_OFST_SHIFT		0
+#define ISPCSI2_CTX_DAT_OFST_OFST_MASK		\
+	(0x1ffe0 << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT)
+
+#define ISPCSI2_CTX_DAT_PING_ADDR(n)		((0x07c) + 0x20 * (n))
+#define ISPCSI2_CTX_DAT_PONG_ADDR(n)		((0x080) + 0x20 * (n))
+#define ISPCSI2_CTX_IRQENABLE(n)		((0x084) + 0x20 * (n))
+#define ISPCSI2_CTX_IRQENABLE_ECC_CORRECTION_IRQ	(1 << 8)
+#define ISPCSI2_CTX_IRQENABLE_LINE_NUMBER_IRQ	(1 << 7)
+#define ISPCSI2_CTX_IRQENABLE_FRAME_NUMBER_IRQ	(1 << 6)
+#define ISPCSI2_CTX_IRQENABLE_CS_IRQ		(1 << 5)
+#define ISPCSI2_CTX_IRQENABLE_LE_IRQ		(1 << 3)
+#define ISPCSI2_CTX_IRQENABLE_LS_IRQ		(1 << 2)
+#define ISPCSI2_CTX_IRQENABLE_FE_IRQ		(1 << 1)
+#define ISPCSI2_CTX_IRQENABLE_FS_IRQ		(1 << 0)
+
+#define ISPCSI2_CTX_IRQSTATUS(n)		((0x088) + 0x20 * (n))
+#define ISPCSI2_CTX_IRQSTATUS_ECC_CORRECTION_IRQ	(1 << 8)
+#define ISPCSI2_CTX_IRQSTATUS_LINE_NUMBER_IRQ	(1 << 7)
+#define ISPCSI2_CTX_IRQSTATUS_FRAME_NUMBER_IRQ	(1 << 6)
+#define ISPCSI2_CTX_IRQSTATUS_CS_IRQ		(1 << 5)
+#define ISPCSI2_CTX_IRQSTATUS_LE_IRQ		(1 << 3)
+#define ISPCSI2_CTX_IRQSTATUS_LS_IRQ		(1 << 2)
+#define ISPCSI2_CTX_IRQSTATUS_FE_IRQ		(1 << 1)
+#define ISPCSI2_CTX_IRQSTATUS_FS_IRQ		(1 << 0)
+
+#define ISPCSI2_CTX_CTRL3(n)			((0x08c) + 0x20 * (n))
+#define ISPCSI2_CTX_CTRL3_ALPHA_SHIFT		5
+#define ISPCSI2_CTX_CTRL3_ALPHA_MASK		\
+	(0x3fff << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT)
+
+/* This instance is for OMAP3630 only */
+#define ISPCSI2_CTX_TRANSCODEH(n)		(0x000 + 0x8 * (n))
+#define ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT	16
+#define ISPCSI2_CTX_TRANSCODEH_HCOUNT_MASK	\
+	(0x1fff << ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT)
+#define ISPCSI2_CTX_TRANSCODEH_HSKIP_SHIFT	0
+#define ISPCSI2_CTX_TRANSCODEH_HSKIP_MASK	\
+	(0x1fff << ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT)
+#define ISPCSI2_CTX_TRANSCODEV(n)		(0x004 + 0x8 * (n))
+#define ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT	16
+#define ISPCSI2_CTX_TRANSCODEV_VCOUNT_MASK	\
+	(0x1fff << ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT)
+#define ISPCSI2_CTX_TRANSCODEV_VSKIP_SHIFT	0
+#define ISPCSI2_CTX_TRANSCODEV_VSKIP_MASK	\
+	(0x1fff << ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT)
+
+/* -----------------------------------------------------------------------------
+ * CSI PHY registers
+ */
+
+#define ISPCSIPHY_REG0				(0x000)
+#define ISPCSIPHY_REG0_THS_TERM_SHIFT		8
+#define ISPCSIPHY_REG0_THS_TERM_MASK		\
+	(0xff << ISPCSIPHY_REG0_THS_TERM_SHIFT)
+#define ISPCSIPHY_REG0_THS_SETTLE_SHIFT		0
+#define ISPCSIPHY_REG0_THS_SETTLE_MASK		\
+	(0xff << ISPCSIPHY_REG0_THS_SETTLE_SHIFT)
+
+#define ISPCSIPHY_REG1					(0x004)
+#define ISPCSIPHY_REG1_RESET_DONE_CTRLCLK		(1 << 29)
+/* This field is for OMAP3630 only */
+#define ISPCSIPHY_REG1_CLOCK_MISS_DETECTOR_STATUS	(1 << 25)
+#define ISPCSIPHY_REG1_TCLK_TERM_SHIFT			18
+#define ISPCSIPHY_REG1_TCLK_TERM_MASK			\
+	(0x7f << ISPCSIPHY_REG1_TCLK_TERM_SHIFT)
+#define ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN_SHIFT	10
+#define ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN_MASK	\
+	(0xff << ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN)
+/* This field is for OMAP3430 only */
+#define ISPCSIPHY_REG1_TCLK_MISS_SHIFT			8
+#define ISPCSIPHY_REG1_TCLK_MISS_MASK			\
+	(0x3 << ISPCSIPHY_REG1_TCLK_MISS_SHIFT)
+/* This field is for OMAP3630 only */
+#define ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT		8
+#define ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_MASK		\
+	(0x3 << ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT)
+#define ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT		0
+#define ISPCSIPHY_REG1_TCLK_SETTLE_MASK			\
+	(0xff << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT)
+
+/* This register is for OMAP3630 only */
+#define ISPCSIPHY_REG2					(0x008)
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_SHIFT	30
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_MASK	\
+	(0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_SHIFT)
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_SHIFT	28
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_MASK	\
+	(0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_SHIFT)
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_SHIFT	26
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_MASK	\
+	(0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_SHIFT)
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_SHIFT	24
+#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_MASK	\
+	(0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_SHIFT)
+#define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT		0
+#define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_MASK		\
+	(0x7fffff << ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT)
+
+#endif	/* OMAP3_ISP_REG_H */
diff --git a/drivers/media/video/isp/ispresizer.c b/drivers/media/video/isp/ispresizer.c
new file mode 100644
index 0000000..a696450
--- /dev/null
+++ b/drivers/media/video/isp/ispresizer.c
@@ -0,0 +1,1710 @@
+/*
+ * ispresizer.c
+ *
+ * TI OMAP3 ISP - Resizer module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispresizer.h"
+
+/*
+ * Resizer Constants
+ */
+#define MIN_RESIZE_VALUE		64
+#define MID_RESIZE_VALUE		512
+#define MAX_RESIZE_VALUE		1024
+
+#define MIN_IN_WIDTH			32
+#define MIN_IN_HEIGHT			32
+#define MAX_IN_WIDTH_MEMORY_MODE	4095
+#define MAX_IN_WIDTH_ONTHEFLY_MODE_ES1	1280
+#define MAX_IN_WIDTH_ONTHEFLY_MODE_ES2	4095
+#define MAX_IN_HEIGHT			4095
+
+#define MIN_OUT_WIDTH			16
+#define MIN_OUT_HEIGHT			2
+#define MAX_OUT_HEIGHT			4095
+
+/*
+ * Resizer Use Constraints
+ * "TRM ES3.1, table 12-46"
+ */
+#define MAX_4TAP_OUT_WIDTH_ES1		1280
+#define MAX_7TAP_OUT_WIDTH_ES1		640
+#define MAX_4TAP_OUT_WIDTH_ES2		3312
+#define MAX_7TAP_OUT_WIDTH_ES2		1650
+#define MAX_4TAP_OUT_WIDTH_3630		4096
+#define MAX_7TAP_OUT_WIDTH_3630		2048
+
+/*
+ * Constants for ratio calculation
+ */
+#define RESIZE_DIVISOR			256
+#define DEFAULT_PHASE			1
+
+/*
+ * Default (and only) configuration of filter coefficients.
+ * 7-tap mode is for scale factors 0.25x to 0.5x.
+ * 4-tap mode is for scale factors 0.5x to 4.0x.
+ * There shouldn't be any reason to recalculate these, EVER.
+ */
+static const struct isprsz_coef filter_coefs = {
+	/* For 8-phase 4-tap horizontal filter: */
+	{
+		0x0000, 0x0100, 0x0000, 0x0000,
+		0x03FA, 0x00F6, 0x0010, 0x0000,
+		0x03F9, 0x00DB, 0x002C, 0x0000,
+		0x03FB, 0x00B3, 0x0053, 0x03FF,
+		0x03FD, 0x0082, 0x0084, 0x03FD,
+		0x03FF, 0x0053, 0x00B3, 0x03FB,
+		0x0000, 0x002C, 0x00DB, 0x03F9,
+		0x0000, 0x0010, 0x00F6, 0x03FA
+	},
+	/* For 8-phase 4-tap vertical filter: */
+	{
+		0x0000, 0x0100, 0x0000, 0x0000,
+		0x03FA, 0x00F6, 0x0010, 0x0000,
+		0x03F9, 0x00DB, 0x002C, 0x0000,
+		0x03FB, 0x00B3, 0x0053, 0x03FF,
+		0x03FD, 0x0082, 0x0084, 0x03FD,
+		0x03FF, 0x0053, 0x00B3, 0x03FB,
+		0x0000, 0x002C, 0x00DB, 0x03F9,
+		0x0000, 0x0010, 0x00F6, 0x03FA
+	},
+	/* For 4-phase 7-tap horizontal filter: */
+	#define DUMMY 0
+	{
+		0x0004, 0x0023, 0x005A, 0x0058, 0x0023, 0x0004, 0x0000, DUMMY,
+		0x0002, 0x0018, 0x004d, 0x0060, 0x0031, 0x0008, 0x0000, DUMMY,
+		0x0001, 0x000f, 0x003f, 0x0062, 0x003f, 0x000f, 0x0001, DUMMY,
+		0x0000, 0x0008, 0x0031, 0x0060, 0x004d, 0x0018, 0x0002, DUMMY
+	},
+	/* For 4-phase 7-tap vertical filter: */
+	{
+		0x0004, 0x0023, 0x005A, 0x0058, 0x0023, 0x0004, 0x0000, DUMMY,
+		0x0002, 0x0018, 0x004d, 0x0060, 0x0031, 0x0008, 0x0000, DUMMY,
+		0x0001, 0x000f, 0x003f, 0x0062, 0x003f, 0x000f, 0x0001, DUMMY,
+		0x0000, 0x0008, 0x0031, 0x0060, 0x004d, 0x0018, 0x0002, DUMMY
+	}
+	/*
+	 * The dummy padding is required in 7-tap mode because of how the
+	 * registers are arranged physically.
+	 */
+	#undef DUMMY
+};
+
+/*
+ * __resizer_get_format - helper function for getting resizer format
+ * @res   : pointer to resizer private structure
+ * @pad   : pad number
+ * @fh    : V4L2 subdev file handle
+ * @which : wanted subdev format
+ * return zero
+ */
+static struct v4l2_mbus_framefmt *
+__resizer_get_format(struct isp_res_device *res, struct v4l2_subdev_fh *fh,
+		     unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &res->formats[pad];
+}
+
+/*
+ * __resizer_get_crop - helper function for getting resizer crop rectangle
+ * @res   : pointer to resizer private structure
+ * @fh    : V4L2 subdev file handle
+ * @which : wanted subdev crop rectangle
+ */
+static struct v4l2_rect *
+__resizer_get_crop(struct isp_res_device *res, struct v4l2_subdev_fh *fh,
+		   enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_crop(fh, RESZ_PAD_SINK);
+	else
+		return &res->crop.request;
+}
+
+/*
+ * resizer_set_filters - Set resizer filters
+ * @res: Device context.
+ * @h_coeff: horizontal coefficient
+ * @v_coeff: vertical coefficient
+ * Return none
+ */
+static void resizer_set_filters(struct isp_res_device *res, const u16 *h_coeff,
+				const u16 *v_coeff)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 startaddr_h, startaddr_v, tmp_h, tmp_v;
+	int i;
+
+	startaddr_h = ISPRSZ_HFILT10;
+	startaddr_v = ISPRSZ_VFILT10;
+
+	for (i = 0; i < COEFF_CNT; i += 2) {
+		tmp_h = h_coeff[i] |
+			(h_coeff[i + 1] << ISPRSZ_HFILT_COEF1_SHIFT);
+		tmp_v = v_coeff[i] |
+			(v_coeff[i + 1] << ISPRSZ_VFILT_COEF1_SHIFT);
+		isp_reg_writel(isp, tmp_h, OMAP3_ISP_IOMEM_RESZ, startaddr_h);
+		isp_reg_writel(isp, tmp_v, OMAP3_ISP_IOMEM_RESZ, startaddr_v);
+		startaddr_h += 4;
+		startaddr_v += 4;
+	}
+}
+
+/*
+ * resizer_set_bilinear - Chrominance horizontal algorithm select
+ * @res: Device context.
+ * @type: Filtering interpolation type.
+ *
+ * Filtering that is same as luminance processing is
+ * intended only for downsampling, and bilinear interpolation
+ * is intended only for upsampling.
+ */
+static void resizer_set_bilinear(struct isp_res_device *res,
+				 enum resizer_chroma_algo type)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	if (type == RSZ_BILINEAR)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_CBILIN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_CBILIN);
+}
+
+/*
+ * resizer_set_ycpos - Luminance and chrominance order
+ * @res: Device context.
+ * @order: order type.
+ */
+static void resizer_set_ycpos(struct isp_res_device *res,
+			      enum v4l2_mbus_pixelcode pixelcode)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	switch (pixelcode) {
+	case V4L2_MBUS_FMT_YUYV8_1X16:
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_YCPOS);
+		break;
+	case V4L2_MBUS_FMT_UYVY8_1X16:
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_YCPOS);
+		break;
+	default:
+		return;
+	}
+}
+
+/*
+ * resizer_set_phase - Setup horizontal and vertical starting phase
+ * @res: Device context.
+ * @h_phase: horizontal phase parameters.
+ * @v_phase: vertical phase parameters.
+ *
+ * Horizontal and vertical phase range is 0 to 7
+ */
+static void resizer_set_phase(struct isp_res_device *res, u32 h_phase,
+			      u32 v_phase)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 rgval = 0;
+
+	rgval = isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) &
+	      ~(ISPRSZ_CNT_HSTPH_MASK | ISPRSZ_CNT_VSTPH_MASK);
+	rgval |= (h_phase << ISPRSZ_CNT_HSTPH_SHIFT) & ISPRSZ_CNT_HSTPH_MASK;
+	rgval |= (v_phase << ISPRSZ_CNT_VSTPH_SHIFT) & ISPRSZ_CNT_VSTPH_MASK;
+
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT);
+}
+
+/*
+ * resizer_set_luma - Setup luminance enhancer parameters
+ * @res: Device context.
+ * @luma: Structure for luminance enhancer parameters.
+ *
+ * Algorithm select:
+ *  0x0: Disable
+ *  0x1: [-1  2 -1]/2 high-pass filter
+ *  0x2: [-1 -2  6 -2 -1]/4 high-pass filter
+ *
+ * Maximum gain:
+ *  The data is coded in U4Q4 representation.
+ *
+ * Slope:
+ *  The data is coded in U4Q4 representation.
+ *
+ * Coring offset:
+ *  The data is coded in U8Q0 representation.
+ *
+ * The new luminance value is computed as:
+ *  Y += HPF(Y) x max(GAIN, (HPF(Y) - CORE) x SLOP + 8) >> 4.
+ */
+static void resizer_set_luma(struct isp_res_device *res,
+			     struct resizer_luma_yenh *luma)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 rgval = 0;
+
+	rgval  = (luma->algo << ISPRSZ_YENH_ALGO_SHIFT)
+		  & ISPRSZ_YENH_ALGO_MASK;
+	rgval |= (luma->gain << ISPRSZ_YENH_GAIN_SHIFT)
+		  & ISPRSZ_YENH_GAIN_MASK;
+	rgval |= (luma->slope << ISPRSZ_YENH_SLOP_SHIFT)
+		  & ISPRSZ_YENH_SLOP_MASK;
+	rgval |= (luma->core << ISPRSZ_YENH_CORE_SHIFT)
+		  & ISPRSZ_YENH_CORE_MASK;
+
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_YENH);
+}
+
+/*
+ * resizer_set_source - Input source select
+ * @res: Device context.
+ * @source: Input source type
+ *
+ * If this field is set to RESIZER_INPUT_VP, the resizer input is fed from
+ * Preview/CCDC engine, otherwise from memory.
+ */
+static void resizer_set_source(struct isp_res_device *res,
+			       enum resizer_input_entity source)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	if (source == RESIZER_INPUT_MEMORY)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_INPSRC);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_INPSRC);
+}
+
+/*
+ * resizer_set_ratio - Setup horizontal and vertical resizing value
+ * @res: Device context.
+ * @ratio: Structure for ratio parameters.
+ *
+ * Resizing range from 64 to 1024
+ */
+static void resizer_set_ratio(struct isp_res_device *res,
+			      const struct resizer_ratio *ratio)
+{
+	struct isp_device *isp = to_isp_device(res);
+	const u16 *h_filter, *v_filter;
+	u32 rgval = 0;
+
+	rgval = isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) &
+			      ~(ISPRSZ_CNT_HRSZ_MASK | ISPRSZ_CNT_VRSZ_MASK);
+	rgval |= ((ratio->horz - 1) << ISPRSZ_CNT_HRSZ_SHIFT)
+		  & ISPRSZ_CNT_HRSZ_MASK;
+	rgval |= ((ratio->vert - 1) << ISPRSZ_CNT_VRSZ_SHIFT)
+		  & ISPRSZ_CNT_VRSZ_MASK;
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT);
+
+	/* prepare horizontal filter coefficients */
+	if (ratio->horz > MID_RESIZE_VALUE)
+		h_filter = &filter_coefs.h_filter_coef_7tap[0];
+	else
+		h_filter = &filter_coefs.h_filter_coef_4tap[0];
+
+	/* prepare vertical filter coefficients */
+	if (ratio->vert > MID_RESIZE_VALUE)
+		v_filter = &filter_coefs.v_filter_coef_7tap[0];
+	else
+		v_filter = &filter_coefs.v_filter_coef_4tap[0];
+
+	resizer_set_filters(res, h_filter, v_filter);
+}
+
+/*
+ * resizer_set_dst_size - Setup the output height and width
+ * @res: Device context.
+ * @width: Output width.
+ * @height: Output height.
+ *
+ * Width :
+ *  The value must be EVEN.
+ *
+ * Height:
+ *  The number of bytes written to SDRAM must be
+ *  a multiple of 16-bytes if the vertical resizing factor
+ *  is greater than 1x (upsizing)
+ */
+static void resizer_set_output_size(struct isp_res_device *res,
+				    u32 width, u32 height)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 rgval = 0;
+
+	dev_dbg(isp->dev, "Output size[w/h]: %dx%d\n", width, height);
+	rgval  = (width << ISPRSZ_OUT_SIZE_HORZ_SHIFT)
+		 & ISPRSZ_OUT_SIZE_HORZ_MASK;
+	rgval |= (height << ISPRSZ_OUT_SIZE_VERT_SHIFT)
+		 & ISPRSZ_OUT_SIZE_VERT_MASK;
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_OUT_SIZE);
+}
+
+/*
+ * resizer_set_output_offset - Setup memory offset for the output lines.
+ * @res: Device context.
+ * @offset: Memory offset.
+ *
+ * The 5 LSBs are forced to be zeros by the hardware to align on a 32-byte
+ * boundary; the 5 LSBs are read-only. For optimal use of SDRAM bandwidth,
+ * the SDRAM line offset must be set on a 256-byte boundary
+ */
+static void resizer_set_output_offset(struct isp_res_device *res, u32 offset)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	isp_reg_writel(isp, offset, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTOFF);
+}
+
+/*
+ * resizer_set_start - Setup vertical and horizontal start position
+ * @res: Device context.
+ * @left: Horizontal start position.
+ * @top: Vertical start position.
+ *
+ * Vertical start line:
+ *  This field makes sense only when the resizer obtains its input
+ *  from the preview engine/CCDC
+ *
+ * Horizontal start pixel:
+ *  Pixels are coded on 16 bits for YUV and 8 bits for color separate data.
+ *  When the resizer gets its input from SDRAM, this field must be set
+ *  to <= 15 for YUV 16-bit data and <= 31 for 8-bit color separate data
+ */
+static void resizer_set_start(struct isp_res_device *res, u32 left, u32 top)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 rgval = 0;
+
+	rgval = (left << ISPRSZ_IN_START_HORZ_ST_SHIFT)
+		& ISPRSZ_IN_START_HORZ_ST_MASK;
+	rgval |= (top << ISPRSZ_IN_START_VERT_ST_SHIFT)
+		 & ISPRSZ_IN_START_VERT_ST_MASK;
+
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_START);
+}
+
+/*
+ * resizer_set_input_size - Setup the input size
+ * @res: Device context.
+ * @width: The range is 0 to 4095 pixels
+ * @height: The range is 0 to 4095 lines
+ */
+static void resizer_set_input_size(struct isp_res_device *res,
+				   u32 width, u32 height)
+{
+	struct isp_device *isp = to_isp_device(res);
+	u32 rgval = 0;
+
+	dev_dbg(isp->dev, "Input size[w/h]: %dx%d\n", width, height);
+
+	rgval = (width << ISPRSZ_IN_SIZE_HORZ_SHIFT)
+		& ISPRSZ_IN_SIZE_HORZ_MASK;
+	rgval |= (height << ISPRSZ_IN_SIZE_VERT_SHIFT)
+		 & ISPRSZ_IN_SIZE_VERT_MASK;
+
+	isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_SIZE);
+}
+
+/*
+ * resizer_set_src_offs - Setup the memory offset for the input lines
+ * @res: Device context.
+ * @offset: Memory offset.
+ *
+ * The 5 LSBs are forced to be zeros by the hardware to align on a 32-byte
+ * boundary; the 5 LSBs are read-only. This field must be programmed to be
+ * 0x0 if the resizer input is from preview engine/CCDC.
+ */
+static void resizer_set_input_offset(struct isp_res_device *res, u32 offset)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	isp_reg_writel(isp, offset, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INOFF);
+}
+
+/*
+ * resizer_set_intype - Input type select
+ * @res: Device context.
+ * @type: Pixel format type.
+ */
+static void resizer_set_intype(struct isp_res_device *res,
+			       enum resizer_colors_type type)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	if (type == RSZ_COLOR8)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_INPTYP);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT,
+			    ISPRSZ_CNT_INPTYP);
+}
+
+/*
+ * __resizer_set_inaddr - Helper function for set input address
+ * @res : pointer to resizer private data structure
+ * @addr: input address
+ * return none
+ */
+static void __resizer_set_inaddr(struct isp_res_device *res, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD);
+}
+
+/*
+ * The data rate at the horizontal resizer output must not exceed half the
+ * functional clock or 100 MP/s, whichever is lower. According to the TRM
+ * there's no similar requirement for the vertical resizer output. However
+ * experience showed that vertical upscaling by 4 leads to SBL overflows (with
+ * data rates at the resizer output exceeding 300 MP/s). Limiting the resizer
+ * output data rate to the functional clock or 200 MP/s, whichever is lower,
+ * seems to get rid of SBL overflows.
+ *
+ * The maximum data rate at the output of the horizontal resizer can thus be
+ * computed with
+ *
+ * max intermediate rate <= L3 clock * input height / output height
+ * max intermediate rate <= L3 clock / 2
+ *
+ * The maximum data rate at the resizer input is then
+ *
+ * max input rate <= max intermediate rate * input width / output width
+ *
+ * where the input width and height are the resizer input crop rectangle size.
+ * The TRM doesn't clearly explain if that's a maximum instant data rate or a
+ * maximum average data rate.
+ */
+void omap3isp_resizer_max_rate(struct isp_res_device *res,
+			       unsigned int *max_rate)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity);
+	const struct v4l2_mbus_framefmt *ofmt = &res->formats[RESZ_PAD_SOURCE];
+	unsigned long limit = min(pipe->l3_ick, 200000000UL);
+	unsigned long clock;
+
+	clock = div_u64((u64)limit * res->crop.active.height, ofmt->height);
+	clock = min(clock, limit / 2);
+	*max_rate = div_u64((u64)clock * res->crop.active.width, ofmt->width);
+}
+
+/*
+ * When the resizer processes images from memory, the driver must slow down read
+ * requests on the input to at least comply with the internal data rate
+ * requirements. If the application real-time requirements can cope with slower
+ * processing, the resizer can be slowed down even more to put less pressure on
+ * the overall system.
+ *
+ * When the resizer processes images on the fly (either from the CCDC or the
+ * preview module), the same data rate requirements apply but they can't be
+ * enforced at the resizer level. The image input module (sensor, CCP2 or
+ * preview module) must not provide image data faster than the resizer can
+ * process.
+ *
+ * For live image pipelines, the data rate is set by the frame format, size and
+ * rate. The sensor output frame rate must not exceed the maximum resizer data
+ * rate.
+ *
+ * The resizer slows down read requests by inserting wait cycles in the SBL
+ * requests. The maximum number of 256-byte requests per second can be computed
+ * as (the data rate is multiplied by 2 to convert from pixels per second to
+ * bytes per second)
+ *
+ * request per second = data rate * 2 / 256
+ * cycles per request = cycles per second / requests per second
+ *
+ * The number of cycles per second is controlled by the L3 clock, leading to
+ *
+ * cycles per request = L3 frequency / 2 * 256 / data rate
+ */
+static void resizer_adjust_bandwidth(struct isp_res_device *res)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity);
+	struct isp_device *isp = to_isp_device(res);
+	unsigned long l3_ick = pipe->l3_ick;
+	struct v4l2_fract *timeperframe;
+	unsigned int cycles_per_frame;
+	unsigned int requests_per_frame;
+	unsigned int cycles_per_request;
+	unsigned int granularity;
+	unsigned int minimum;
+	unsigned int maximum;
+	unsigned int value;
+
+	if (res->input != RESIZER_INPUT_MEMORY) {
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			    ISPSBL_SDR_REQ_RSZ_EXP_MASK);
+		return;
+	}
+
+	switch (isp->revision) {
+	case ISP_REVISION_1_0:
+	case ISP_REVISION_2_0:
+	default:
+		granularity = 1024;
+		break;
+
+	case ISP_REVISION_15_0:
+		granularity = 32;
+		break;
+	}
+
+	/* Compute the minimum number of cycles per request, based on the
+	 * pipeline maximum data rate. This is an absolute lower bound if we
+	 * don't want SBL overflows, so round the value up.
+	 */
+	cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
+				     pipe->max_rate);
+	minimum = DIV_ROUND_UP(cycles_per_request, granularity);
+
+	/* Compute the maximum number of cycles per request, based on the
+	 * requested frame rate. This is a soft upper bound to achieve a frame
+	 * rate equal or higher than the requested value, so round the value
+	 * down.
+	 */
+	timeperframe = &pipe->max_timeperframe;
+
+	requests_per_frame = DIV_ROUND_UP(res->crop.active.width * 2, 256)
+			   * res->crop.active.height;
+	cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
+				   timeperframe->denominator);
+	cycles_per_request = cycles_per_frame / requests_per_frame;
+
+	maximum = cycles_per_request / granularity;
+
+	value = max(minimum, maximum);
+
+	dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			ISPSBL_SDR_REQ_RSZ_EXP_MASK,
+			value << ISPSBL_SDR_REQ_RSZ_EXP_SHIFT);
+}
+
+/*
+ * omap3isp_resizer_busy - Checks if ISP resizer is busy.
+ *
+ * Returns busy field from ISPRSZ_PCR register.
+ */
+int omap3isp_resizer_busy(struct isp_res_device *res)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR) &
+			     ISPRSZ_PCR_BUSY;
+}
+
+/*
+ * resizer_set_inaddr - Sets the memory address of the input frame.
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ */
+static void resizer_set_inaddr(struct isp_res_device *res, u32 addr)
+{
+	res->addr_base = addr;
+
+	/* This will handle crop settings in stream off state */
+	if (res->crop_offset)
+		addr += res->crop_offset & ~0x1f;
+
+	__resizer_set_inaddr(res, addr);
+}
+
+/*
+ * Configures the memory address to which the output frame is written.
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ * Note: For SBL efficiency reasons the address should be on a 256-byte
+ * boundary.
+ */
+static void resizer_set_outaddr(struct isp_res_device *res, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	/*
+	 * Set output address. This needs to be in its own function
+	 * because it changes often.
+	 */
+	isp_reg_writel(isp, addr << ISPRSZ_SDR_OUTADD_ADDR_SHIFT,
+		       OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTADD);
+}
+
+/*
+ * resizer_print_status - Prints the values of the resizer module registers.
+ */
+#define RSZ_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###RSZ " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_##name))
+
+static void resizer_print_status(struct isp_res_device *res)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	dev_dbg(isp->dev, "-------------Resizer Register dump----------\n");
+
+	RSZ_PRINT_REGISTER(isp, PCR);
+	RSZ_PRINT_REGISTER(isp, CNT);
+	RSZ_PRINT_REGISTER(isp, OUT_SIZE);
+	RSZ_PRINT_REGISTER(isp, IN_START);
+	RSZ_PRINT_REGISTER(isp, IN_SIZE);
+	RSZ_PRINT_REGISTER(isp, SDR_INADD);
+	RSZ_PRINT_REGISTER(isp, SDR_INOFF);
+	RSZ_PRINT_REGISTER(isp, SDR_OUTADD);
+	RSZ_PRINT_REGISTER(isp, SDR_OUTOFF);
+	RSZ_PRINT_REGISTER(isp, YENH);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * resizer_calc_ratios - Helper function for calculate resizer ratios
+ * @res: pointer to resizer private data structure
+ * @input: input frame size
+ * @output: output frame size
+ * @ratio : return calculated ratios
+ * return none
+ *
+ * The resizer uses a polyphase sample rate converter. The upsampling filter
+ * has a fixed number of phases that depend on the resizing ratio. As the ratio
+ * computation depends on the number of phases, we need to compute a first
+ * approximation and then refine it.
+ *
+ * The input/output/ratio relationship is given by the OMAP34xx TRM:
+ *
+ * - 8-phase, 4-tap mode (RSZ = 64 ~ 512)
+ *	iw = (32 * sph + (ow - 1) * hrsz + 16) >> 8 + 7
+ *	ih = (32 * spv + (oh - 1) * vrsz + 16) >> 8 + 4
+ * - 4-phase, 7-tap mode (RSZ = 513 ~ 1024)
+ *	iw = (64 * sph + (ow - 1) * hrsz + 32) >> 8 + 7
+ *	ih = (64 * spv + (oh - 1) * vrsz + 32) >> 8 + 7
+ *
+ * iw and ih are the input width and height after cropping. Those equations need
+ * to be satisfied exactly for the resizer to work correctly.
+ *
+ * Reverting the equations, we can compute the resizing ratios with
+ *
+ * - 8-phase, 4-tap mode
+ *	hrsz = ((iw - 7) * 256 - 16 - 32 * sph) / (ow - 1)
+ *	vrsz = ((ih - 4) * 256 - 16 - 32 * spv) / (oh - 1)
+ * - 4-phase, 7-tap mode
+ *	hrsz = ((iw - 7) * 256 - 32 - 64 * sph) / (ow - 1)
+ *	vrsz = ((ih - 7) * 256 - 32 - 64 * spv) / (oh - 1)
+ *
+ * The ratios are integer values, and must be rounded down to ensure that the
+ * cropped input size is not bigger than the uncropped input size. As the ratio
+ * in 7-tap mode is always smaller than the ratio in 4-tap mode, we can use the
+ * 7-tap mode equations to compute a ratio approximation.
+ *
+ * We first clamp the output size according to the hardware capabilitie to avoid
+ * auto-cropping the input more than required to satisfy the TRM equations. The
+ * minimum output size is achieved with a scaling factor of 1024. It is thus
+ * computed using the 7-tap equations.
+ *
+ *	min ow = ((iw - 7) * 256 - 32 - 64 * sph) / 1024 + 1
+ *	min oh = ((ih - 7) * 256 - 32 - 64 * spv) / 1024 + 1
+ *
+ * Similarly, the maximum output size is achieved with a scaling factor of 64
+ * and computed using the 4-tap equations.
+ *
+ *	max ow = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / 64 + 1
+ *	max oh = ((ih - 4) * 256 + 255 - 16 - 32 * spv) / 64 + 1
+ *
+ * The additional +255 term compensates for the round down operation performed
+ * by the TRM equations when shifting the value right by 8 bits.
+ *
+ * We then compute and clamp the ratios (x1/4 ~ x4). Clamping the output size to
+ * the maximum value guarantees that the ratio value will never be smaller than
+ * the minimum, but it could still slightly exceed the maximum. Clamping the
+ * ratio will thus result in a resizing factor slightly larger than the
+ * requested value.
+ *
+ * To accomodate that, and make sure the TRM equations are satisfied exactly, we
+ * compute the input crop rectangle as the last step.
+ *
+ * As if the situation wasn't complex enough, the maximum output width depends
+ * on the vertical resizing ratio.  Fortunately, the output height doesn't
+ * depend on the horizontal resizing ratio. We can then start by computing the
+ * output height and the vertical ratio, and then move to computing the output
+ * width and the horizontal ratio.
+ */
+static void resizer_calc_ratios(struct isp_res_device *res,
+				struct v4l2_rect *input,
+				struct v4l2_mbus_framefmt *output,
+				struct resizer_ratio *ratio)
+{
+	struct isp_device *isp = to_isp_device(res);
+	const unsigned int spv = DEFAULT_PHASE;
+	const unsigned int sph = DEFAULT_PHASE;
+	unsigned int upscaled_width;
+	unsigned int upscaled_height;
+	unsigned int min_width;
+	unsigned int min_height;
+	unsigned int max_width;
+	unsigned int max_height;
+	unsigned int width_alignment;
+
+	/*
+	 * Clamp the output height based on the hardware capabilities and
+	 * compute the vertical resizing ratio.
+	 */
+	min_height = ((input->height - 7) * 256 - 32 - 64 * spv) / 1024 + 1;
+	min_height = max_t(unsigned int, min_height, MIN_OUT_HEIGHT);
+	max_height = ((input->height - 4) * 256 + 255 - 16 - 32 * spv) / 64 + 1;
+	max_height = min_t(unsigned int, max_height, MAX_OUT_HEIGHT);
+	output->height = clamp(output->height, min_height, max_height);
+
+	ratio->vert = ((input->height - 7) * 256 - 32 - 64 * spv)
+		    / (output->height - 1);
+	ratio->vert = clamp_t(unsigned int, ratio->vert,
+			      MIN_RESIZE_VALUE, MAX_RESIZE_VALUE);
+
+	if (ratio->vert <= MID_RESIZE_VALUE) {
+		upscaled_height = (output->height - 1) * ratio->vert
+				+ 32 * spv + 16;
+		input->height = (upscaled_height >> 8) + 4;
+	} else {
+		upscaled_height = (output->height - 1) * ratio->vert
+				+ 64 * spv + 32;
+		input->height = (upscaled_height >> 8) + 7;
+	}
+
+	/*
+	 * Compute the minimum and maximum output widths based on the hardware
+	 * capabilities. The maximum depends on the vertical resizing ratio.
+	 */
+	min_width = ((input->width - 7) * 256 - 32 - 64 * sph) / 1024 + 1;
+	min_width = max_t(unsigned int, min_width, MIN_OUT_WIDTH);
+
+	if (ratio->vert <= MID_RESIZE_VALUE) {
+		switch (isp->revision) {
+		case ISP_REVISION_1_0:
+			max_width = MAX_4TAP_OUT_WIDTH_ES1;
+			break;
+
+		case ISP_REVISION_2_0:
+		default:
+			max_width = MAX_4TAP_OUT_WIDTH_ES2;
+			break;
+
+		case ISP_REVISION_15_0:
+			max_width = MAX_4TAP_OUT_WIDTH_3630;
+			break;
+		}
+	} else {
+		switch (isp->revision) {
+		case ISP_REVISION_1_0:
+			max_width = MAX_7TAP_OUT_WIDTH_ES1;
+			break;
+
+		case ISP_REVISION_2_0:
+		default:
+			max_width = MAX_7TAP_OUT_WIDTH_ES2;
+			break;
+
+		case ISP_REVISION_15_0:
+			max_width = MAX_7TAP_OUT_WIDTH_3630;
+			break;
+		}
+	}
+	max_width = min(((input->width - 7) * 256 + 255 - 16 - 32 * sph) / 64
+			+ 1, max_width);
+
+	/*
+	 * The output width must be even, and must be a multiple of 16 bytes
+	 * when upscaling vertically. Clamp the output width to the valid range.
+	 * Take the alignment into account (the maximum width in 7-tap mode on
+	 * ES2 isn't a multiple of 8) and align the result up to make sure it
+	 * won't be smaller than the minimum.
+	 */
+	width_alignment = ratio->vert < 256 ? 8 : 2;
+	output->width = clamp(output->width, min_width,
+			      max_width & ~(width_alignment - 1));
+	output->width = ALIGN(output->width, width_alignment);
+
+	ratio->horz = ((input->width - 7) * 256 - 32 - 64 * sph)
+		    / (output->width - 1);
+	ratio->horz = clamp_t(unsigned int, ratio->horz,
+			      MIN_RESIZE_VALUE, MAX_RESIZE_VALUE);
+
+	if (ratio->horz <= MID_RESIZE_VALUE) {
+		upscaled_width = (output->width - 1) * ratio->horz
+			       + 32 * sph + 16;
+		input->width = (upscaled_width >> 8) + 7;
+	} else {
+		upscaled_width = (output->width - 1) * ratio->horz
+			       + 64 * sph + 32;
+		input->width = (upscaled_width >> 8) + 7;
+	}
+}
+
+/*
+ * resizer_set_crop_params - Setup hardware with cropping parameters
+ * @res : resizer private structure
+ * @crop_rect : current crop rectangle
+ * @ratio : resizer ratios
+ * return none
+ */
+static void resizer_set_crop_params(struct isp_res_device *res,
+				    const struct v4l2_mbus_framefmt *input,
+				    const struct v4l2_mbus_framefmt *output)
+{
+	resizer_set_ratio(res, &res->ratio);
+
+	/* Set chrominance horizontal algorithm */
+	if (res->ratio.horz >= RESIZE_DIVISOR)
+		resizer_set_bilinear(res, RSZ_THE_SAME);
+	else
+		resizer_set_bilinear(res, RSZ_BILINEAR);
+
+	resizer_adjust_bandwidth(res);
+
+	if (res->input == RESIZER_INPUT_MEMORY) {
+		/* Calculate additional offset for crop */
+		res->crop_offset = (res->crop.active.top * input->width +
+				    res->crop.active.left) * 2;
+		/*
+		 * Write lowest 4 bits of horizontal pixel offset (in pixels),
+		 * vertical start must be 0.
+		 */
+		resizer_set_start(res, (res->crop_offset / 2) & 0xf, 0);
+
+		/*
+		 * Set start (read) address for cropping, in bytes.
+		 * Lowest 5 bits must be zero.
+		 */
+		__resizer_set_inaddr(res,
+				res->addr_base + (res->crop_offset & ~0x1f));
+	} else {
+		/*
+		 * Set vertical start line and horizontal starting pixel.
+		 * If the input is from CCDC/PREV, horizontal start field is
+		 * in bytes (twice number of pixels).
+		 */
+		resizer_set_start(res, res->crop.active.left * 2,
+				  res->crop.active.top);
+		/* Input address and offset must be 0 for preview/ccdc input */
+		__resizer_set_inaddr(res, 0);
+		resizer_set_input_offset(res, 0);
+	}
+
+	/* Set the input size */
+	resizer_set_input_size(res, res->crop.active.width,
+			       res->crop.active.height);
+}
+
+static void resizer_configure(struct isp_res_device *res)
+{
+	struct v4l2_mbus_framefmt *informat, *outformat;
+	struct resizer_luma_yenh luma = {0, 0, 0, 0};
+
+	resizer_set_source(res, res->input);
+
+	informat = &res->formats[RESZ_PAD_SINK];
+	outformat = &res->formats[RESZ_PAD_SOURCE];
+
+	/* RESZ_PAD_SINK */
+	if (res->input == RESIZER_INPUT_VP)
+		resizer_set_input_offset(res, 0);
+	else
+		resizer_set_input_offset(res, ALIGN(informat->width, 0x10) * 2);
+
+	/* YUV422 interleaved, default phase, no luma enhancement */
+	resizer_set_intype(res, RSZ_YUV422);
+	resizer_set_ycpos(res, informat->code);
+	resizer_set_phase(res, DEFAULT_PHASE, DEFAULT_PHASE);
+	resizer_set_luma(res, &luma);
+
+	/* RESZ_PAD_SOURCE */
+	resizer_set_output_offset(res, ALIGN(outformat->width * 2, 32));
+	resizer_set_output_size(res, outformat->width, outformat->height);
+
+	resizer_set_crop_params(res, informat, outformat);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void resizer_enable_oneshot(struct isp_res_device *res)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR,
+		    ISPRSZ_PCR_ENABLE | ISPRSZ_PCR_ONESHOT);
+}
+
+void omap3isp_resizer_isr_frame_sync(struct isp_res_device *res)
+{
+	/*
+	 * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
+	 * condition, the module was paused and now we have a buffer queued
+	 * on the output again. Restart the pipeline if running in continuous
+	 * mode.
+	 */
+	if (res->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
+	    res->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
+		resizer_enable_oneshot(res);
+		isp_video_dmaqueue_flags_clr(&res->video_out);
+	}
+}
+
+static void resizer_isr_buffer(struct isp_res_device *res)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity);
+	struct isp_buffer *buffer;
+	int restart = 0;
+
+	if (res->state == ISP_PIPELINE_STREAM_STOPPED)
+		return;
+
+	/* Complete the output buffer and, if reading from memory, the input
+	 * buffer.
+	 */
+	buffer = omap3isp_video_buffer_next(&res->video_out, res->error);
+	if (buffer != NULL) {
+		resizer_set_outaddr(res, buffer->isp_addr);
+		restart = 1;
+	}
+
+	pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
+
+	if (res->input == RESIZER_INPUT_MEMORY) {
+		buffer = omap3isp_video_buffer_next(&res->video_in, 0);
+		if (buffer != NULL)
+			resizer_set_inaddr(res, buffer->isp_addr);
+		pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+	}
+
+	if (res->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
+		if (isp_pipeline_ready(pipe))
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+	} else {
+		/* If an underrun occurs, the video queue operation handler will
+		 * restart the resizer. Otherwise restart it immediately.
+		 */
+		if (restart)
+			resizer_enable_oneshot(res);
+	}
+
+	res->error = 0;
+}
+
+/*
+ * omap3isp_resizer_isr - ISP resizer interrupt handler
+ *
+ * Manage the resizer video buffers and configure shadowed and busy-locked
+ * registers.
+ */
+void omap3isp_resizer_isr(struct isp_res_device *res)
+{
+	struct v4l2_mbus_framefmt *informat, *outformat;
+
+	if (omap3isp_module_sync_is_stopping(&res->wait, &res->stopping))
+		return;
+
+	if (res->applycrop) {
+		outformat = __resizer_get_format(res, NULL, RESZ_PAD_SOURCE,
+					      V4L2_SUBDEV_FORMAT_ACTIVE);
+		informat = __resizer_get_format(res, NULL, RESZ_PAD_SINK,
+					      V4L2_SUBDEV_FORMAT_ACTIVE);
+		resizer_set_crop_params(res, informat, outformat);
+		res->applycrop = 0;
+	}
+
+	resizer_isr_buffer(res);
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+static int resizer_video_queue(struct isp_video *video,
+			       struct isp_buffer *buffer)
+{
+	struct isp_res_device *res = &video->isp->isp_res;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		resizer_set_inaddr(res, buffer->isp_addr);
+
+	/*
+	 * We now have a buffer queued on the output. Despite what the
+	 * TRM says, the resizer can't be restarted immediately.
+	 * Enabling it in one shot mode in the middle of a frame (or at
+	 * least asynchronously to the frame) results in the output
+	 * being shifted randomly left/right and up/down, as if the
+	 * hardware didn't synchronize itself to the beginning of the
+	 * frame correctly.
+	 *
+	 * Restart the resizer on the next sync interrupt if running in
+	 * continuous mode or when starting the stream.
+	 */
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		resizer_set_outaddr(res, buffer->isp_addr);
+
+	return 0;
+}
+
+static const struct isp_video_operations resizer_video_ops = {
+	.queue = resizer_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+/*
+ * resizer_set_stream - Enable/Disable streaming on resizer subdev
+ * @sd: ISP resizer V4L2 subdev
+ * @enable: 1 == Enable, 0 == Disable
+ *
+ * The resizer hardware can't be enabled without a memory buffer to write to.
+ * As the s_stream operation is called in response to a STREAMON call without
+ * any buffer queued yet, just update the state field and return immediately.
+ * The resizer will be enabled in resizer_video_queue().
+ */
+static int resizer_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct isp_video *video_out = &res->video_out;
+	struct isp_device *isp = to_isp_device(res);
+	struct device *dev = to_device(res);
+
+	if (res->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+
+		omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_RESIZER);
+		resizer_configure(res);
+		res->error = 0;
+		resizer_print_status(res);
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_WRITE);
+		if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
+			resizer_enable_oneshot(res);
+			isp_video_dmaqueue_flags_clr(video_out);
+		}
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (res->input == RESIZER_INPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_READ);
+		omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_WRITE);
+
+		resizer_enable_oneshot(res);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (omap3isp_module_sync_idle(&sd->entity, &res->wait,
+					      &res->stopping))
+			dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_RESIZER_READ |
+				OMAP3_ISP_SBL_RESIZER_WRITE);
+		omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_RESIZER);
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+	}
+
+	res->state = enable;
+	return 0;
+}
+
+/*
+ * resizer_g_crop - handle get crop subdev operation
+ * @sd : pointer to v4l2 subdev structure
+ * @pad : subdev pad
+ * @crop : pointer to crop structure
+ * @which : active or try format
+ * return zero
+ */
+static int resizer_g_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_crop *crop)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+	struct resizer_ratio ratio;
+
+	/* Only sink pad has crop capability */
+	if (crop->pad != RESZ_PAD_SINK)
+		return -EINVAL;
+
+	format = __resizer_get_format(res, fh, RESZ_PAD_SOURCE, crop->which);
+	crop->rect = *__resizer_get_crop(res, fh, crop->which);
+	resizer_calc_ratios(res, &crop->rect, format, &ratio);
+
+	return 0;
+}
+
+/*
+ * resizer_try_crop - mangles crop parameters.
+ */
+static void resizer_try_crop(const struct v4l2_mbus_framefmt *sink,
+			     const struct v4l2_mbus_framefmt *source,
+			     struct v4l2_rect *crop)
+{
+	const unsigned int spv = DEFAULT_PHASE;
+	const unsigned int sph = DEFAULT_PHASE;
+
+	/* Crop rectangle is constrained to the output size so that zoom ratio
+	 * cannot exceed +/-4.0.
+	 */
+	unsigned int min_width =
+		((32 * sph + (source->width - 1) * 64 + 16) >> 8) + 7;
+	unsigned int min_height =
+		((32 * spv + (source->height - 1) * 64 + 16) >> 8) + 4;
+	unsigned int max_width =
+		((64 * sph + (source->width - 1) * 1024 + 32) >> 8) + 7;
+	unsigned int max_height =
+		((64 * spv + (source->height - 1) * 1024 + 32) >> 8) + 7;
+
+	crop->width = clamp_t(u32, crop->width, min_width, max_width);
+	crop->height = clamp_t(u32, crop->height, min_height, max_height);
+
+	/* Crop can not go beyond of the input rectangle */
+	crop->left = clamp_t(u32, crop->left, 0, sink->width - MIN_IN_WIDTH);
+	crop->width = clamp_t(u32, crop->width, MIN_IN_WIDTH,
+			      sink->width - crop->left);
+	crop->top = clamp_t(u32, crop->top, 0, sink->height - MIN_IN_HEIGHT);
+	crop->height = clamp_t(u32, crop->height, MIN_IN_HEIGHT,
+			       sink->height - crop->top);
+}
+
+/*
+ * resizer_s_crop - handle set crop subdev operation
+ * @sd : pointer to v4l2 subdev structure
+ * @pad : subdev pad
+ * @crop : pointer to crop structure
+ * @which : active or try format
+ * return -EINVAL or zero when succeed
+ */
+static int resizer_s_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_crop *crop)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct isp_device *isp = to_isp_device(res);
+	struct v4l2_mbus_framefmt *format_sink, *format_source;
+	struct resizer_ratio ratio;
+
+	/* Only sink pad has crop capability */
+	if (crop->pad != RESZ_PAD_SINK)
+		return -EINVAL;
+
+	format_sink = __resizer_get_format(res, fh, RESZ_PAD_SINK,
+					   crop->which);
+	format_source = __resizer_get_format(res, fh, RESZ_PAD_SOURCE,
+					     crop->which);
+
+	dev_dbg(isp->dev, "%s: L=%d,T=%d,W=%d,H=%d,which=%d\n", __func__,
+		crop->rect.left, crop->rect.top, crop->rect.width,
+		crop->rect.height, crop->which);
+
+	dev_dbg(isp->dev, "%s: input=%dx%d, output=%dx%d\n", __func__,
+		format_sink->width, format_sink->height,
+		format_source->width, format_source->height);
+
+	resizer_try_crop(format_sink, format_source, &crop->rect);
+	*__resizer_get_crop(res, fh, crop->which) = crop->rect;
+	resizer_calc_ratios(res, &crop->rect, format_source, &ratio);
+
+	if (crop->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	res->ratio = ratio;
+	res->crop.active = crop->rect;
+
+	/*
+	 * s_crop can be called while streaming is on. In this case
+	 * the crop values will be set in the next IRQ.
+	 */
+	if (res->state != ISP_PIPELINE_STREAM_STOPPED)
+		res->applycrop = 1;
+
+	return 0;
+}
+
+/* resizer pixel formats */
+static const unsigned int resizer_formats[] = {
+	V4L2_MBUS_FMT_UYVY8_1X16,
+	V4L2_MBUS_FMT_YUYV8_1X16,
+};
+
+static unsigned int resizer_max_in_width(struct isp_res_device *res)
+{
+	struct isp_device *isp = to_isp_device(res);
+
+	if (res->input == RESIZER_INPUT_MEMORY) {
+		return MAX_IN_WIDTH_MEMORY_MODE;
+	} else {
+		if (isp->revision == ISP_REVISION_1_0)
+			return MAX_IN_WIDTH_ONTHEFLY_MODE_ES1;
+		else
+			return MAX_IN_WIDTH_ONTHEFLY_MODE_ES2;
+	}
+}
+
+/*
+ * resizer_try_format - Handle try format by pad subdev method
+ * @res   : ISP resizer device
+ * @fh    : V4L2 subdev file handle
+ * @pad   : pad num
+ * @fmt   : pointer to v4l2 format structure
+ * @which : wanted subdev format
+ */
+static void resizer_try_format(struct isp_res_device *res,
+			       struct v4l2_subdev_fh *fh, unsigned int pad,
+			       struct v4l2_mbus_framefmt *fmt,
+			       enum v4l2_subdev_format_whence which)
+{
+	struct v4l2_mbus_framefmt *format;
+	struct resizer_ratio ratio;
+	struct v4l2_rect crop;
+
+	switch (pad) {
+	case RESZ_PAD_SINK:
+		if (fmt->code != V4L2_MBUS_FMT_YUYV8_1X16 &&
+		    fmt->code != V4L2_MBUS_FMT_UYVY8_1X16)
+			fmt->code = V4L2_MBUS_FMT_YUYV8_1X16;
+
+		fmt->width = clamp_t(u32, fmt->width, MIN_IN_WIDTH,
+				     resizer_max_in_width(res));
+		fmt->height = clamp_t(u32, fmt->height, MIN_IN_HEIGHT,
+				      MAX_IN_HEIGHT);
+		break;
+
+	case RESZ_PAD_SOURCE:
+		format = __resizer_get_format(res, fh, RESZ_PAD_SINK, which);
+		fmt->code = format->code;
+
+		crop = *__resizer_get_crop(res, fh, which);
+		resizer_calc_ratios(res, &crop, fmt, &ratio);
+		break;
+	}
+
+	fmt->colorspace = V4L2_COLORSPACE_JPEG;
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * resizer_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int resizer_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	if (code->pad == RESZ_PAD_SINK) {
+		if (code->index >= ARRAY_SIZE(resizer_formats))
+			return -EINVAL;
+
+		code->code = resizer_formats[code->index];
+	} else {
+		if (code->index != 0)
+			return -EINVAL;
+
+		format = __resizer_get_format(res, fh, RESZ_PAD_SINK,
+					      V4L2_SUBDEV_FORMAT_TRY);
+		code->code = format->code;
+	}
+
+	return 0;
+}
+
+static int resizer_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	resizer_try_format(res, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	resizer_try_format(res, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * resizer_get_format - Handle get format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on sucess
+ */
+static int resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __resizer_get_format(res, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * resizer_set_format - Handle set format by pads subdev method
+ * @sd    : pointer to v4l2 subdev structure
+ * @fh    : V4L2 subdev file handle
+ * @fmt   : pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int resizer_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *crop;
+
+	format = __resizer_get_format(res, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	resizer_try_format(res, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	if (fmt->pad == RESZ_PAD_SINK) {
+		/* reset crop rectangle */
+		crop = __resizer_get_crop(res, fh, fmt->which);
+		crop->left = 0;
+		crop->top = 0;
+		crop->width = fmt->format.width;
+		crop->height = fmt->format.height;
+
+		/* Propagate the format from sink to source */
+		format = __resizer_get_format(res, fh, RESZ_PAD_SOURCE,
+					      fmt->which);
+		*format = fmt->format;
+		resizer_try_format(res, fh, RESZ_PAD_SOURCE, format,
+				   fmt->which);
+	}
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		/* Compute and store the active crop rectangle and resizer
+		 * ratios. format already points to the source pad active
+		 * format.
+		 */
+		res->crop.active = res->crop.request;
+		resizer_calc_ratios(res, &res->crop.active, format,
+				       &res->ratio);
+	}
+
+	return 0;
+}
+
+/*
+ * resizer_init_formats - Initialize formats on all pads
+ * @sd: ISP resizer V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int resizer_init_formats(struct v4l2_subdev *sd,
+				struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = RESZ_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_YUYV8_1X16;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	resizer_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops resizer_v4l2_core_ops = {
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+};
+
+/* subdev file operations */
+static const struct v4l2_subdev_file_ops resizer_v4l2_file_ops = {
+	.open = resizer_init_formats,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops resizer_v4l2_video_ops = {
+	.s_stream = resizer_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops resizer_v4l2_pad_ops = {
+	.enum_mbus_code = resizer_enum_mbus_code,
+	.enum_frame_size = resizer_enum_frame_size,
+	.get_fmt = resizer_get_format,
+	.set_fmt = resizer_set_format,
+	.get_crop = resizer_g_crop,
+	.set_crop = resizer_s_crop,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops resizer_v4l2_ops = {
+	.core = &resizer_v4l2_core_ops,
+	.file = &resizer_v4l2_file_ops,
+	.video = &resizer_v4l2_video_ops,
+	.pad = &resizer_v4l2_pad_ops,
+};
+
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * resizer_link_setup - Setup resizer connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL or zero on success
+ */
+static int resizer_link_setup(struct media_entity *entity,
+			      const struct media_pad *local,
+			      const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_res_device *res = v4l2_get_subdevdata(sd);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case RESZ_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+		/* read from memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (res->input == RESIZER_INPUT_VP)
+				return -EBUSY;
+			res->input = RESIZER_INPUT_MEMORY;
+		} else {
+			if (res->input == RESIZER_INPUT_MEMORY)
+				res->input = RESIZER_INPUT_NONE;
+		}
+		break;
+
+	case RESZ_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* read from ccdc or previewer */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (res->input == RESIZER_INPUT_MEMORY)
+				return -EBUSY;
+			res->input = RESIZER_INPUT_VP;
+		} else {
+			if (res->input == RESIZER_INPUT_VP)
+				res->input = RESIZER_INPUT_NONE;
+		}
+		break;
+
+	case RESZ_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+		/* resizer always write to memory */
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations resizer_media_ops = {
+	.link_setup = resizer_link_setup,
+};
+
+/*
+ * resizer_init_entities - Initialize resizer subdev and media entity.
+ * @res : Pointer to resizer device structure
+ * return -ENOMEM or zero on success
+ */
+static int resizer_init_entities(struct isp_res_device *res)
+{
+	struct v4l2_subdev *sd = &res->subdev;
+	struct media_pad *pads = res->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	res->input = RESIZER_INPUT_NONE;
+
+	v4l2_subdev_init(sd, &resizer_v4l2_ops);
+	strlcpy(sd->name, "OMAP3 ISP resizer", sizeof(sd->name));
+	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, res);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	v4l2_ctrl_handler_init(&res->ctrls, 1);
+	sd->ctrl_handler = &res->ctrls;
+
+	pads[RESZ_PAD_SINK].flags = MEDIA_PAD_FL_INPUT;
+	pads[RESZ_PAD_SOURCE].flags = MEDIA_PAD_FL_OUTPUT;
+
+	me->ops = &resizer_media_ops;
+	ret = media_entity_init(me, RESZ_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	resizer_init_formats(sd, NULL);
+
+	res->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	res->video_in.ops = &resizer_video_ops;
+	res->video_in.isp = to_isp_device(res);
+	res->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	res->video_in.bpl_alignment = 32;
+	res->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	res->video_out.ops = &resizer_video_ops;
+	res->video_out.isp = to_isp_device(res);
+	res->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	res->video_out.bpl_alignment = 32;
+
+	ret = omap3isp_video_init(&res->video_in, "resizer");
+	if (ret < 0)
+		return ret;
+
+	ret = omap3isp_video_init(&res->video_out, "resizer");
+	if (ret < 0)
+		return ret;
+
+	/* Connect the video nodes to the resizer subdev. */
+	ret = media_entity_create_link(&res->video_in.video.entity, 0,
+			&res->subdev.entity, RESZ_PAD_SINK, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = media_entity_create_link(&res->subdev.entity, RESZ_PAD_SOURCE,
+			&res->video_out.video.entity, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
+{
+	media_entity_cleanup(&res->subdev.entity);
+
+	v4l2_device_unregister_subdev(&res->subdev);
+	v4l2_ctrl_handler_free(&res->ctrls);
+	omap3isp_video_unregister(&res->video_in);
+	omap3isp_video_unregister(&res->video_out);
+}
+
+int omap3isp_resizer_register_entities(struct isp_res_device *res,
+				       struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &res->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&res->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&res->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_resizer_unregister_entities(res);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP resizer initialization and cleanup
+ */
+
+void omap3isp_resizer_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * isp_resizer_init - Resizer initialization.
+ * @isp : Pointer to ISP device
+ * return -ENOMEM or zero on success
+ */
+int omap3isp_resizer_init(struct isp_device *isp)
+{
+	struct isp_res_device *res = &isp->isp_res;
+	int ret;
+
+	init_waitqueue_head(&res->wait);
+	atomic_set(&res->stopping, 0);
+	ret = resizer_init_entities(res);
+	if (ret < 0)
+		goto out;
+
+out:
+	if (ret)
+		omap3isp_resizer_cleanup(isp);
+
+	return ret;
+}
diff --git a/drivers/media/video/isp/ispresizer.h b/drivers/media/video/isp/ispresizer.h
new file mode 100644
index 0000000..39d188f
--- /dev/null
+++ b/drivers/media/video/isp/ispresizer.h
@@ -0,0 +1,150 @@
+/*
+ * ispresizer.h
+ *
+ * TI OMAP3 ISP - Resizer module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_RESIZER_H
+#define OMAP3_ISP_RESIZER_H
+
+#include <linux/types.h>
+#include <media/v4l2-ctrls.h>
+
+/*
+ * Constants for filter coefficents count
+ */
+#define COEFF_CNT		32
+
+/*
+ * struct isprsz_coef - Structure for resizer filter coeffcients.
+ * @h_filter_coef_4tap: Horizontal filter coefficients for 8-phase/4-tap
+ *			mode (.5x-4x)
+ * @v_filter_coef_4tap: Vertical filter coefficients for 8-phase/4-tap
+ *			mode (.5x-4x)
+ * @h_filter_coef_7tap: Horizontal filter coefficients for 4-phase/7-tap
+ *			mode (.25x-.5x)
+ * @v_filter_coef_7tap: Vertical filter coefficients for 4-phase/7-tap
+ *			mode (.25x-.5x)
+ */
+struct isprsz_coef {
+	u16 h_filter_coef_4tap[32];
+	u16 v_filter_coef_4tap[32];
+	/* Every 8th value is a dummy value in the following arrays: */
+	u16 h_filter_coef_7tap[32];
+	u16 v_filter_coef_7tap[32];
+};
+
+/* Chrominance horizontal algorithm */
+enum resizer_chroma_algo {
+	RSZ_THE_SAME = 0,	/* Chrominance the same as Luminance */
+	RSZ_BILINEAR = 1,	/* Chrominance uses bilinear interpolation */
+};
+
+/* Resizer input type select */
+enum resizer_colors_type {
+	RSZ_YUV422 = 0,		/* YUV422 color is interleaved */
+	RSZ_COLOR8 = 1,		/* Color separate data on 8 bits */
+};
+
+/*
+ * Structure for horizontal and vertical resizing value
+ */
+struct resizer_ratio {
+	u32 horz;
+	u32 vert;
+};
+
+/*
+ * Structure for luminance enhancer parameters.
+ */
+struct resizer_luma_yenh {
+	u8 algo;		/* algorithm select. */
+	u8 gain;		/* maximum gain. */
+	u8 slope;		/* slope. */
+	u8 core;		/* core offset. */
+};
+
+enum resizer_input_entity {
+	RESIZER_INPUT_NONE,
+	RESIZER_INPUT_VP,	/* input video port - prev or ccdc */
+	RESIZER_INPUT_MEMORY,
+};
+
+/* Sink and source resizer pads */
+#define RESZ_PAD_SINK			0
+#define RESZ_PAD_SOURCE			1
+#define RESZ_PADS_NUM			2
+
+/*
+ * struct isp_res_device - OMAP3 ISP resizer module
+ * @crop.request: Crop rectangle requested by the user
+ * @crop.active: Active crop rectangle (based on hardware requirements)
+ */
+struct isp_res_device {
+	struct v4l2_subdev subdev;
+	struct media_pad pads[RESZ_PADS_NUM];
+	struct v4l2_mbus_framefmt formats[RESZ_PADS_NUM];
+
+	struct v4l2_ctrl_handler ctrls;
+
+	enum resizer_input_entity input;
+	struct isp_video video_in;
+	struct isp_video video_out;
+	unsigned int error;
+
+	u32 addr_base;   /* stored source buffer address in memory mode */
+	u32 crop_offset; /* additional offset for crop in memory mode */
+	struct resizer_ratio ratio;
+	int pm_state;
+	unsigned int applycrop:1;
+	enum isp_pipeline_stream_state state;
+	wait_queue_head_t wait;
+	atomic_t stopping;
+
+	struct {
+		struct v4l2_rect request;
+		struct v4l2_rect active;
+	} crop;
+};
+
+struct isp_device;
+
+int omap3isp_resizer_init(struct isp_device *isp);
+void omap3isp_resizer_cleanup(struct isp_device *isp);
+
+int omap3isp_resizer_register_entities(struct isp_res_device *res,
+				       struct v4l2_device *vdev);
+void omap3isp_resizer_unregister_entities(struct isp_res_device *res);
+void omap3isp_resizer_isr_frame_sync(struct isp_res_device *res);
+void omap3isp_resizer_isr(struct isp_res_device *isp_res);
+
+void omap3isp_resizer_max_rate(struct isp_res_device *res,
+			       unsigned int *max_rate);
+
+void omap3isp_resizer_suspend(struct isp_res_device *isp_res);
+
+void omap3isp_resizer_resume(struct isp_res_device *isp_res);
+
+int omap3isp_resizer_busy(struct isp_res_device *isp_res);
+
+#endif	/* OMAP3_ISP_RESIZER_H */
diff --git a/drivers/media/video/isp/ispstat.c b/drivers/media/video/isp/ispstat.c
new file mode 100644
index 0000000..3406572
--- /dev/null
+++ b/drivers/media/video/isp/ispstat.c
@@ -0,0 +1,1100 @@
+/*
+ * ispstat.c
+ *
+ * TI OMAP3 ISP - Statistics core
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+
+#define IS_COHERENT_BUF(stat)	((stat)->dma_ch >= 0)
+
+/*
+ * MAGIC_SIZE must always be the greatest common divisor of
+ * AEWB_PACKET_SIZE and AF_PAXEL_SIZE.
+ */
+#define MAGIC_SIZE		16
+#define MAGIC_NUM		0x55
+
+/* HACK: AF module seems to be writing one more paxel data than it should. */
+#define AF_EXTRA_DATA		OMAP3ISP_AF_PAXEL_SIZE
+
+/*
+ * HACK: H3A modules go to an invalid state after have a SBL overflow. It makes
+ * the next buffer to start to be written in the same point where the overflow
+ * occurred instead of the configured address. The only known way to make it to
+ * go back to a valid state is having a valid buffer processing. Of course it
+ * requires at least a doubled buffer size to avoid an access to invalid memory
+ * region. But it does not fix everything. It may happen more than one
+ * consecutive SBL overflows. In that case, it might be unpredictable how many
+ * buffers the allocated memory should fit. For that case, a recover
+ * configuration was created. It produces the minimum buffer size for each H3A
+ * module and decrease the change for more SBL overflows. This recover state
+ * will be enabled every time a SBL overflow occur. As the output buffer size
+ * isn't big, it's possible to have an extra size able to fit many recover
+ * buffers making it extreamily unlikely to have an access to invalid memory
+ * region.
+ */
+#define NUM_H3A_RECOVER_BUFS	10
+
+/*
+ * HACK: Because of HW issues the generic layer sometimes need to have
+ * different behaviour for different statistic modules.
+ */
+#define IS_H3A_AF(stat)		((stat) == &(stat)->isp->isp_af)
+#define IS_H3A_AEWB(stat)	((stat) == &(stat)->isp->isp_aewb)
+#define IS_H3A(stat)		(IS_H3A_AF(stat) || IS_H3A_AEWB(stat))
+
+static void __isp_stat_buf_sync_magic(struct ispstat *stat,
+				      struct ispstat_buffer *buf,
+				      u32 buf_size, enum dma_data_direction dir,
+				      void (*dma_sync)(struct device *,
+					dma_addr_t, unsigned long, size_t,
+					enum dma_data_direction))
+{
+	struct device *dev = stat->isp->dev;
+	struct page *pg;
+	dma_addr_t dma_addr;
+	u32 offset;
+
+	/* Initial magic words */
+	pg = vmalloc_to_page(buf->virt_addr);
+	dma_addr = page_to_dma(dev, pg);
+	dma_sync(dev, dma_addr, 0, MAGIC_SIZE, dir);
+
+	/* Final magic words */
+	pg = vmalloc_to_page(buf->virt_addr + buf_size);
+	dma_addr = page_to_dma(dev, pg);
+	offset = ((u32)buf->virt_addr + buf_size) & ~PAGE_MASK;
+	dma_sync(dev, dma_addr, offset, MAGIC_SIZE, dir);
+}
+
+static void isp_stat_buf_sync_magic_for_device(struct ispstat *stat,
+					       struct ispstat_buffer *buf,
+					       u32 buf_size,
+					       enum dma_data_direction dir)
+{
+	if (IS_COHERENT_BUF(stat))
+		return;
+
+	__isp_stat_buf_sync_magic(stat, buf, buf_size, dir,
+				  dma_sync_single_range_for_device);
+}
+
+static void isp_stat_buf_sync_magic_for_cpu(struct ispstat *stat,
+					    struct ispstat_buffer *buf,
+					    u32 buf_size,
+					    enum dma_data_direction dir)
+{
+	if (IS_COHERENT_BUF(stat))
+		return;
+
+	__isp_stat_buf_sync_magic(stat, buf, buf_size, dir,
+				  dma_sync_single_range_for_cpu);
+}
+
+static int isp_stat_buf_check_magic(struct ispstat *stat,
+				    struct ispstat_buffer *buf)
+{
+	const u32 buf_size = IS_H3A_AF(stat) ?
+			     buf->buf_size + AF_EXTRA_DATA : buf->buf_size;
+	u8 *w;
+	u8 *end;
+	int ret = -EINVAL;
+
+	isp_stat_buf_sync_magic_for_cpu(stat, buf, buf_size, DMA_FROM_DEVICE);
+
+	/* Checking initial magic numbers. They shouldn't be here anymore. */
+	for (w = buf->virt_addr, end = w + MAGIC_SIZE; w < end; w++)
+		if (likely(*w != MAGIC_NUM))
+			ret = 0;
+
+	if (ret) {
+		dev_dbg(stat->isp->dev, "%s: beginning magic check does not "
+					"match.\n", stat->subdev.name);
+		return ret;
+	}
+
+	/* Checking magic numbers at the end. They must be still here. */
+	for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE;
+	     w < end; w++) {
+		if (unlikely(*w != MAGIC_NUM)) {
+			dev_dbg(stat->isp->dev, "%s: endding magic check does "
+				"not match.\n", stat->subdev.name);
+			return -EINVAL;
+		}
+	}
+
+	isp_stat_buf_sync_magic_for_device(stat, buf, buf_size,
+					   DMA_FROM_DEVICE);
+
+	return 0;
+}
+
+static void isp_stat_buf_insert_magic(struct ispstat *stat,
+				      struct ispstat_buffer *buf)
+{
+	const u32 buf_size = IS_H3A_AF(stat) ?
+			     stat->buf_size + AF_EXTRA_DATA : stat->buf_size;
+
+	isp_stat_buf_sync_magic_for_cpu(stat, buf, buf_size, DMA_FROM_DEVICE);
+
+	/*
+	 * Inserting MAGIC_NUM at the beginning and end of the buffer.
+	 * buf->buf_size is set only after the buffer is queued. For now the
+	 * right buf_size for the current configuration is pointed by
+	 * stat->buf_size.
+	 */
+	memset(buf->virt_addr, MAGIC_NUM, MAGIC_SIZE);
+	memset(buf->virt_addr + buf_size, MAGIC_NUM, MAGIC_SIZE);
+
+	isp_stat_buf_sync_magic_for_device(stat, buf, buf_size,
+					   DMA_BIDIRECTIONAL);
+}
+
+static void isp_stat_buf_sync_for_device(struct ispstat *stat,
+					 struct ispstat_buffer *buf)
+{
+	if (IS_COHERENT_BUF(stat))
+		return;
+
+	dma_sync_sg_for_device(stat->isp->dev, buf->iovm->sgt->sgl,
+			       buf->iovm->sgt->nents, DMA_FROM_DEVICE);
+}
+
+static void isp_stat_buf_sync_for_cpu(struct ispstat *stat,
+				      struct ispstat_buffer *buf)
+{
+	if (IS_COHERENT_BUF(stat))
+		return;
+
+	dma_sync_sg_for_cpu(stat->isp->dev, buf->iovm->sgt->sgl,
+			    buf->iovm->sgt->nents, DMA_FROM_DEVICE);
+}
+
+static void isp_stat_buf_clear(struct ispstat *stat)
+{
+	int i;
+
+	for (i = 0; i < STAT_MAX_BUFS; i++)
+		stat->buf[i].empty = 1;
+}
+
+static struct ispstat_buffer *
+__isp_stat_buf_find(struct ispstat *stat, int look_empty)
+{
+	struct ispstat_buffer *found = NULL;
+	int i;
+
+	for (i = 0; i < STAT_MAX_BUFS; i++) {
+		struct ispstat_buffer *curr = &stat->buf[i];
+
+		/*
+		 * Don't select the buffer which is being copied to
+		 * userspace or used by the module.
+		 */
+		if (curr == stat->locked_buf || curr == stat->active_buf)
+			continue;
+
+		/* Don't select uninitialised buffers if it's not required */
+		if (!look_empty && curr->empty)
+			continue;
+
+		/* Pick uninitialised buffer over anything else if look_empty */
+		if (curr->empty) {
+			found = curr;
+			break;
+		}
+
+		/* Choose the oldest buffer */
+		if (!found ||
+		    (s32)curr->frame_number - (s32)found->frame_number < 0)
+			found = curr;
+	}
+
+	return found;
+}
+
+static inline struct ispstat_buffer *
+isp_stat_buf_find_oldest(struct ispstat *stat)
+{
+	return __isp_stat_buf_find(stat, 0);
+}
+
+static inline struct ispstat_buffer *
+isp_stat_buf_find_oldest_or_empty(struct ispstat *stat)
+{
+	return __isp_stat_buf_find(stat, 1);
+}
+
+static int isp_stat_buf_queue(struct ispstat *stat)
+{
+	if (!stat->active_buf)
+		return STAT_NO_BUF;
+
+	do_gettimeofday(&stat->active_buf->ts);
+
+	stat->active_buf->buf_size = stat->buf_size;
+	if (isp_stat_buf_check_magic(stat, stat->active_buf)) {
+		dev_dbg(stat->isp->dev, "%s: data wasn't properly written.\n",
+			stat->subdev.name);
+		return STAT_NO_BUF;
+	}
+	stat->active_buf->config_counter = stat->config_counter;
+	stat->active_buf->frame_number = stat->frame_number;
+	stat->active_buf->empty = 0;
+	stat->active_buf = NULL;
+
+	return STAT_BUF_DONE;
+}
+
+/* Get next free buffer to write the statistics to and mark it active. */
+static void isp_stat_buf_next(struct ispstat *stat)
+{
+	if (unlikely(stat->active_buf))
+		/* Overwriting unused active buffer */
+		dev_dbg(stat->isp->dev, "%s: new buffer requested without "
+					"queuing active one.\n",
+					stat->subdev.name);
+	else
+		stat->active_buf = isp_stat_buf_find_oldest_or_empty(stat);
+}
+
+static void isp_stat_buf_release(struct ispstat *stat)
+{
+	unsigned long flags;
+
+	isp_stat_buf_sync_for_device(stat, stat->locked_buf);
+	spin_lock_irqsave(&stat->isp->stat_lock, flags);
+	stat->locked_buf = NULL;
+	spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+}
+
+/* Get buffer to userspace. */
+static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
+					       struct omap3isp_stat_data *data)
+{
+	int rval = 0;
+	unsigned long flags;
+	struct ispstat_buffer *buf;
+
+	spin_lock_irqsave(&stat->isp->stat_lock, flags);
+
+	while (1) {
+		buf = isp_stat_buf_find_oldest(stat);
+		if (!buf) {
+			spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+			dev_dbg(stat->isp->dev, "%s: cannot find a buffer.\n",
+				stat->subdev.name);
+			return ERR_PTR(-EBUSY);
+		}
+		if (isp_stat_buf_check_magic(stat, buf)) {
+			dev_dbg(stat->isp->dev, "%s: current buffer has "
+				"corrupted data\n.", stat->subdev.name);
+			/* Mark empty because it doesn't have valid data. */
+			buf->empty = 1;
+		} else {
+			/* Buffer isn't corrupted. */
+			break;
+		}
+	}
+
+	stat->locked_buf = buf;
+
+	spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+
+	if (buf->buf_size > data->buf_size) {
+		dev_warn(stat->isp->dev, "%s: userspace's buffer size is "
+					 "not enough.\n", stat->subdev.name);
+		isp_stat_buf_release(stat);
+		return ERR_PTR(-EINVAL);
+	}
+
+	isp_stat_buf_sync_for_cpu(stat, buf);
+
+	rval = copy_to_user(data->buf,
+			    buf->virt_addr,
+			    buf->buf_size);
+
+	if (rval) {
+		dev_info(stat->isp->dev,
+			 "%s: failed copying %d bytes of stat data\n",
+			 stat->subdev.name, rval);
+		buf = ERR_PTR(-EFAULT);
+		isp_stat_buf_release(stat);
+	}
+
+	return buf;
+}
+
+static void isp_stat_bufs_free(struct ispstat *stat)
+{
+	struct isp_device *isp = stat->isp;
+	int i;
+
+	for (i = 0; i < STAT_MAX_BUFS; i++) {
+		struct ispstat_buffer *buf = &stat->buf[i];
+
+		if (!IS_COHERENT_BUF(stat)) {
+			if (IS_ERR_OR_NULL((void *)buf->iommu_addr))
+				continue;
+			if (buf->iovm)
+				dma_unmap_sg(isp->dev, buf->iovm->sgt->sgl,
+					     buf->iovm->sgt->nents,
+					     DMA_FROM_DEVICE);
+			iommu_vfree(isp->iommu, buf->iommu_addr);
+		} else {
+			if (!buf->virt_addr)
+				continue;
+			dma_free_coherent(stat->isp->dev, stat->buf_alloc_size,
+					  buf->virt_addr, buf->dma_addr);
+		}
+		buf->iommu_addr = 0;
+		buf->iovm = NULL;
+		buf->dma_addr = 0;
+		buf->virt_addr = NULL;
+		buf->empty = 1;
+	}
+
+	dev_dbg(stat->isp->dev, "%s: all buffers were freed.\n",
+		stat->subdev.name);
+
+	stat->buf_alloc_size = 0;
+	stat->active_buf = NULL;
+}
+
+static int isp_stat_bufs_alloc_iommu(struct ispstat *stat, unsigned int size)
+{
+	struct isp_device *isp = stat->isp;
+	int i;
+
+	stat->buf_alloc_size = size;
+
+	for (i = 0; i < STAT_MAX_BUFS; i++) {
+		struct ispstat_buffer *buf = &stat->buf[i];
+		struct iovm_struct *iovm;
+
+		WARN_ON(buf->dma_addr);
+		buf->iommu_addr = iommu_vmalloc(isp->iommu, 0, size,
+						IOMMU_FLAG);
+		if (IS_ERR((void *)buf->iommu_addr)) {
+			dev_err(stat->isp->dev,
+				 "%s: Can't acquire memory for "
+				 "buffer %d\n", stat->subdev.name, i);
+			isp_stat_bufs_free(stat);
+			return -ENOMEM;
+		}
+
+		iovm = find_iovm_area(isp->iommu, buf->iommu_addr);
+		if (!iovm ||
+		    !dma_map_sg(isp->dev, iovm->sgt->sgl, iovm->sgt->nents,
+				DMA_FROM_DEVICE)) {
+			isp_stat_bufs_free(stat);
+			return -ENOMEM;
+		}
+		buf->iovm = iovm;
+
+		buf->virt_addr = da_to_va(stat->isp->iommu,
+					  (u32)buf->iommu_addr);
+		buf->empty = 1;
+		dev_dbg(stat->isp->dev, "%s: buffer[%d] allocated."
+			"iommu_addr=0x%08lx virt_addr=0x%08lx",
+			stat->subdev.name, i, buf->iommu_addr,
+			(unsigned long)buf->virt_addr);
+	}
+
+	return 0;
+}
+
+static int isp_stat_bufs_alloc_dma(struct ispstat *stat, unsigned int size)
+{
+	int i;
+
+	stat->buf_alloc_size = size;
+
+	for (i = 0; i < STAT_MAX_BUFS; i++) {
+		struct ispstat_buffer *buf = &stat->buf[i];
+
+		WARN_ON(buf->iommu_addr);
+		buf->virt_addr = dma_alloc_coherent(stat->isp->dev, size,
+					&buf->dma_addr, GFP_KERNEL | GFP_DMA);
+
+		if (!buf->virt_addr || !buf->dma_addr) {
+			dev_info(stat->isp->dev,
+				 "%s: Can't acquire memory for "
+				 "DMA buffer %d\n", stat->subdev.name, i);
+			isp_stat_bufs_free(stat);
+			return -ENOMEM;
+		}
+		buf->empty = 1;
+
+		dev_dbg(stat->isp->dev, "%s: buffer[%d] allocated."
+			"dma_addr=0x%08lx virt_addr=0x%08lx\n",
+			stat->subdev.name, i, (unsigned long)buf->dma_addr,
+			(unsigned long)buf->virt_addr);
+	}
+
+	return 0;
+}
+
+static int isp_stat_bufs_alloc(struct ispstat *stat, u32 size)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&stat->isp->stat_lock, flags);
+
+	BUG_ON(stat->locked_buf != NULL);
+
+	/* Are the old buffers big enough? */
+	if (stat->buf_alloc_size >= size) {
+		spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+		return 0;
+	}
+
+	if (stat->state != ISPSTAT_DISABLED || stat->buf_processing) {
+		dev_info(stat->isp->dev,
+			 "%s: trying to allocate memory when busy\n",
+			 stat->subdev.name);
+		spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+		return -EBUSY;
+	}
+
+	spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+
+	isp_stat_bufs_free(stat);
+
+	if (IS_COHERENT_BUF(stat))
+		return isp_stat_bufs_alloc_dma(stat, size);
+	else
+		return isp_stat_bufs_alloc_iommu(stat, size);
+}
+
+static void isp_stat_queue_event(struct ispstat *stat, int err)
+{
+	struct video_device *vdev = &stat->subdev.devnode;
+	struct v4l2_event event;
+	struct omap3isp_stat_event_status *status = (void *)event.u.data;
+
+	memset(&event, 0, sizeof(event));
+	if (!err) {
+		status->frame_number = stat->frame_number;
+		status->config_counter = stat->config_counter;
+	} else {
+		status->buf_err = 1;
+	}
+	event.type = stat->event_type;
+	v4l2_event_queue(vdev, &event);
+}
+
+
+/*
+ * omap3isp_stat_request_statistics - Request statistics.
+ * @data: Pointer to return statistics data.
+ *
+ * Returns 0 if successful.
+ */
+int omap3isp_stat_request_statistics(struct ispstat *stat,
+				     struct omap3isp_stat_data *data)
+{
+	struct ispstat_buffer *buf;
+
+	if (stat->state != ISPSTAT_ENABLED) {
+		dev_dbg(stat->isp->dev, "%s: engine not enabled.\n",
+			stat->subdev.name);
+		return -EINVAL;
+	}
+
+	mutex_lock(&stat->ioctl_lock);
+	buf = isp_stat_buf_get(stat, data);
+	if (IS_ERR(buf)) {
+		mutex_unlock(&stat->ioctl_lock);
+		return PTR_ERR(buf);
+	}
+
+	data->ts = buf->ts;
+	data->config_counter = buf->config_counter;
+	data->frame_number = buf->frame_number;
+	data->buf_size = buf->buf_size;
+
+	/*
+	 * Deprecated. Number of new buffers is always equal to number of
+	 * queued events without error flag. By setting it to 0, userspace
+	 * won't try to request new buffer without receiving new event.
+	 * This field must go away in future.
+	 */
+	data->new_bufs = 0;
+
+	buf->empty = 1;
+	isp_stat_buf_release(stat);
+	mutex_unlock(&stat->ioctl_lock);
+
+	return 0;
+}
+
+/*
+ * omap3isp_stat_config - Receives new statistic engine configuration.
+ * @new_conf: Pointer to config structure.
+ *
+ * Returns 0 if successful, -EINVAL if new_conf pointer is NULL, -ENOMEM if
+ * was unable to allocate memory for the buffer, or other errors if parameters
+ * are invalid.
+ */
+int omap3isp_stat_config(struct ispstat *stat, void *new_conf)
+{
+	int ret;
+	unsigned long irqflags;
+	struct ispstat_generic_config *user_cfg = new_conf;
+	u32 buf_size = user_cfg->buf_size;
+
+	if (!new_conf) {
+		dev_dbg(stat->isp->dev, "%s: configuration is NULL\n",
+			stat->subdev.name);
+		return -EINVAL;
+	}
+
+	mutex_lock(&stat->ioctl_lock);
+
+	dev_dbg(stat->isp->dev, "%s: configuring module with buffer "
+		"size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size);
+
+	ret = stat->ops->validate_params(stat, new_conf);
+	if (ret) {
+		mutex_unlock(&stat->ioctl_lock);
+		dev_dbg(stat->isp->dev, "%s: configuration values are "
+					"invalid.\n", stat->subdev.name);
+		return ret;
+	}
+
+	if (buf_size != user_cfg->buf_size)
+		dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size "
+			"request to 0x%08lx\n", stat->subdev.name,
+			(unsigned long)user_cfg->buf_size);
+
+	/*
+	 * Hack: H3A modules may need a doubled buffer size to avoid access
+	 * to a invalid memory address after a SBL overflow.
+	 * The buffer size is always PAGE_ALIGNED.
+	 * Hack 2: MAGIC_SIZE is added to buf_size so a magic word can be
+	 * inserted at the end to data integrity check purpose.
+	 * Hack 3: AF module writes one paxel data more than it should, so
+	 * the buffer allocation must consider it to avoid invalid memory
+	 * access.
+	 * Hack 4: H3A need to allocate extra space for the recover state.
+	 */
+	if (IS_H3A(stat)) {
+		buf_size = user_cfg->buf_size * 2 + MAGIC_SIZE;
+		if (IS_H3A_AF(stat))
+			/*
+			 * Adding one extra paxel data size for each recover
+			 * buffer + 2 regular ones.
+			 */
+			buf_size += AF_EXTRA_DATA * (NUM_H3A_RECOVER_BUFS + 2);
+		if (stat->recover_priv) {
+			struct ispstat_generic_config *recover_cfg =
+				stat->recover_priv;
+			buf_size += recover_cfg->buf_size *
+				    NUM_H3A_RECOVER_BUFS;
+		}
+		buf_size = PAGE_ALIGN(buf_size);
+	} else { /* Histogram */
+		buf_size = PAGE_ALIGN(user_cfg->buf_size + MAGIC_SIZE);
+	}
+
+	ret = isp_stat_bufs_alloc(stat, buf_size);
+	if (ret) {
+		mutex_unlock(&stat->ioctl_lock);
+		return ret;
+	}
+
+	spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+	stat->ops->set_params(stat, new_conf);
+	spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+
+	/*
+	 * Returning the right future config_counter for this setup, so
+	 * userspace can *know* when it has been applied.
+	 */
+	user_cfg->config_counter = stat->config_counter + stat->inc_config;
+
+	/* Module has a valid configuration. */
+	stat->configured = 1;
+	dev_dbg(stat->isp->dev, "%s: module has been successfully "
+		"configured.\n", stat->subdev.name);
+
+	mutex_unlock(&stat->ioctl_lock);
+
+	return 0;
+}
+
+/*
+ * isp_stat_buf_process - Process statistic buffers.
+ * @buf_state: points out if buffer is ready to be processed. It's necessary
+ *	       because histogram needs to copy the data from internal memory
+ *	       before be able to process the buffer.
+ */
+static int isp_stat_buf_process(struct ispstat *stat, int buf_state)
+{
+	int ret = STAT_NO_BUF;
+
+	if (!atomic_add_unless(&stat->buf_err, -1, 0) &&
+	    buf_state == STAT_BUF_DONE && stat->state == ISPSTAT_ENABLED) {
+		ret = isp_stat_buf_queue(stat);
+		isp_stat_buf_next(stat);
+	}
+
+	return ret;
+}
+
+int omap3isp_stat_pcr_busy(struct ispstat *stat)
+{
+	return stat->ops->busy(stat);
+}
+
+int omap3isp_stat_busy(struct ispstat *stat)
+{
+	return omap3isp_stat_pcr_busy(stat) | stat->buf_processing |
+		(stat->state != ISPSTAT_DISABLED);
+}
+
+/*
+ * isp_stat_pcr_enable - Disables/Enables statistic engines.
+ * @pcr_enable: 0/1 - Disables/Enables the engine.
+ *
+ * Must be called from ISP driver when the module is idle and synchronized
+ * with CCDC.
+ */
+static void isp_stat_pcr_enable(struct ispstat *stat, u8 pcr_enable)
+{
+	if ((stat->state != ISPSTAT_ENABLING &&
+	     stat->state != ISPSTAT_ENABLED) && pcr_enable)
+		/* Userspace has disabled the module. Aborting. */
+		return;
+
+	stat->ops->enable(stat, pcr_enable);
+	if (stat->state == ISPSTAT_DISABLING && !pcr_enable)
+		stat->state = ISPSTAT_DISABLED;
+	else if (stat->state == ISPSTAT_ENABLING && pcr_enable)
+		stat->state = ISPSTAT_ENABLED;
+}
+
+void omap3isp_stat_suspend(struct ispstat *stat)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&stat->isp->stat_lock, flags);
+
+	if (stat->state != ISPSTAT_DISABLED)
+		stat->ops->enable(stat, 0);
+	if (stat->state == ISPSTAT_ENABLED)
+		stat->state = ISPSTAT_SUSPENDED;
+
+	spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+}
+
+void omap3isp_stat_resume(struct ispstat *stat)
+{
+	/* Module will be re-enabled with its pipeline */
+	if (stat->state == ISPSTAT_SUSPENDED)
+		stat->state = ISPSTAT_ENABLING;
+}
+
+static void isp_stat_try_enable(struct ispstat *stat)
+{
+	unsigned long irqflags;
+
+	if (stat->priv == NULL)
+		/* driver wasn't initialised */
+		return;
+
+	spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+	if (stat->state == ISPSTAT_ENABLING && !stat->buf_processing &&
+	    stat->buf_alloc_size) {
+		/*
+		 * Userspace's requested to enable the engine but it wasn't yet.
+		 * Let's do that now.
+		 */
+		stat->update = 1;
+		isp_stat_buf_next(stat);
+		stat->ops->setup_regs(stat, stat->priv);
+		isp_stat_buf_insert_magic(stat, stat->active_buf);
+
+		/*
+		 * H3A module has some hw issues which forces the driver to
+		 * ignore next buffers even if it was disabled in the meantime.
+		 * On the other hand, Histogram shouldn't ignore buffers anymore
+		 * if it's being enabled.
+		 */
+		if (!IS_H3A(stat))
+			atomic_set(&stat->buf_err, 0);
+
+		isp_stat_pcr_enable(stat, 1);
+		spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+		dev_dbg(stat->isp->dev, "%s: module is enabled.\n",
+			stat->subdev.name);
+	} else {
+		spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+	}
+}
+
+void omap3isp_stat_isr_frame_sync(struct ispstat *stat)
+{
+	isp_stat_try_enable(stat);
+}
+
+void omap3isp_stat_sbl_overflow(struct ispstat *stat)
+{
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+	/*
+	 * Due to a H3A hw issue which prevents the next buffer to start from
+	 * the correct memory address, 2 buffers must be ignored.
+	 */
+	atomic_set(&stat->buf_err, 2);
+
+	/*
+	 * If more than one SBL overflow happen in a row, H3A module may access
+	 * invalid memory region.
+	 * stat->sbl_ovl_recover is set to tell to the driver to temporarily use
+	 * a soft configuration which helps to avoid consecutive overflows.
+	 */
+	if (stat->recover_priv)
+		stat->sbl_ovl_recover = 1;
+	spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+}
+
+/*
+ * omap3isp_stat_enable - Disable/Enable statistic engine as soon as possible
+ * @enable: 0/1 - Disables/Enables the engine.
+ *
+ * Client should configure all the module registers before this.
+ * This function can be called from a userspace request.
+ */
+int omap3isp_stat_enable(struct ispstat *stat, u8 enable)
+{
+	unsigned long irqflags;
+
+	dev_dbg(stat->isp->dev, "%s: user wants to %s module.\n",
+		stat->subdev.name, enable ? "enable" : "disable");
+
+	/* Prevent enabling while configuring */
+	mutex_lock(&stat->ioctl_lock);
+
+	spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+
+	if (!stat->configured && enable) {
+		spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+		mutex_unlock(&stat->ioctl_lock);
+		dev_dbg(stat->isp->dev, "%s: cannot enable module as it's "
+			"never been successfully configured so far.\n",
+			stat->subdev.name);
+		return -EINVAL;
+	}
+
+	if (enable) {
+		if (stat->state == ISPSTAT_DISABLING)
+			/* Previous disabling request wasn't done yet */
+			stat->state = ISPSTAT_ENABLED;
+		else if (stat->state == ISPSTAT_DISABLED)
+			/* Module is now being enabled */
+			stat->state = ISPSTAT_ENABLING;
+	} else {
+		if (stat->state == ISPSTAT_ENABLING) {
+			/* Previous enabling request wasn't done yet */
+			stat->state = ISPSTAT_DISABLED;
+		} else if (stat->state == ISPSTAT_ENABLED) {
+			/* Module is now being disabled */
+			stat->state = ISPSTAT_DISABLING;
+			isp_stat_buf_clear(stat);
+		}
+	}
+
+	spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+	mutex_unlock(&stat->ioctl_lock);
+
+	return 0;
+}
+
+int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(subdev);
+
+	if (enable) {
+		/*
+		 * Only set enable PCR bit if the module was previously
+		 * enabled through ioct.
+		 */
+		isp_stat_try_enable(stat);
+	} else {
+		unsigned long flags;
+		/* Disable PCR bit and config enable field */
+		omap3isp_stat_enable(stat, 0);
+		spin_lock_irqsave(&stat->isp->stat_lock, flags);
+		stat->ops->enable(stat, 0);
+		spin_unlock_irqrestore(&stat->isp->stat_lock, flags);
+
+		/*
+		 * If module isn't busy, a new interrupt may come or not to
+		 * set the state to DISABLED. As Histogram needs to read its
+		 * internal memory to clear it, let interrupt handler
+		 * responsible of changing state to DISABLED. If the last
+		 * interrupt is coming, it's still safe as the handler will
+		 * ignore the second time when state is already set to DISABLED.
+		 * It's necessary to synchronize Histogram with streamoff, once
+		 * the module may be considered idle before last SDMA transfer
+		 * starts if we return here.
+		 */
+		if (!omap3isp_stat_pcr_busy(stat))
+			omap3isp_stat_isr(stat);
+
+		dev_dbg(stat->isp->dev, "%s: module is being disabled\n",
+			stat->subdev.name);
+	}
+
+	return 0;
+}
+
+/*
+ * __stat_isr - Interrupt handler for statistic drivers
+ */
+static void __stat_isr(struct ispstat *stat, int from_dma)
+{
+	int ret = STAT_BUF_DONE;
+	int buf_processing;
+	unsigned long irqflags;
+	struct isp_pipeline *pipe;
+
+	/*
+	 * stat->buf_processing must be set before disable module. It's
+	 * necessary to not inform too early the buffers aren't busy in case
+	 * of SDMA is going to be used.
+	 */
+	spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+	if (stat->state == ISPSTAT_DISABLED) {
+		spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+		return;
+	}
+	buf_processing = stat->buf_processing;
+	stat->buf_processing = 1;
+	stat->ops->enable(stat, 0);
+
+	if (buf_processing && !from_dma) {
+		if (stat->state == ISPSTAT_ENABLED) {
+			spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+			dev_err(stat->isp->dev,
+				"%s: interrupt occurred when module was still "
+				"processing a buffer.\n", stat->subdev.name);
+			ret = STAT_NO_BUF;
+			goto out;
+		} else {
+			/*
+			 * Interrupt handler was called from streamoff when
+			 * the module wasn't busy anymore to ensure it is being
+			 * disabled after process last buffer. If such buffer
+			 * processing has already started, no need to do
+			 * anything else.
+			 */
+			spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+			return;
+		}
+	}
+	spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+
+	/* If it's busy we can't process this buffer anymore */
+	if (!omap3isp_stat_pcr_busy(stat)) {
+		if (!from_dma && stat->ops->buf_process)
+			/* Module still need to copy data to buffer. */
+			ret = stat->ops->buf_process(stat);
+		if (ret == STAT_BUF_WAITING_DMA)
+			/* Buffer is not ready yet */
+			return;
+
+		spin_lock_irqsave(&stat->isp->stat_lock, irqflags);
+
+		/*
+		 * Histogram needs to read its internal memory to clear it
+		 * before be disabled. For that reason, common statistic layer
+		 * can return only after call stat's buf_process() operator.
+		 */
+		if (stat->state == ISPSTAT_DISABLING) {
+			stat->state = ISPSTAT_DISABLED;
+			spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+			stat->buf_processing = 0;
+			return;
+		}
+		pipe = to_isp_pipeline(&stat->subdev.entity);
+		stat->frame_number = atomic_read(&pipe->frame_number);
+
+		/*
+		 * Before this point, 'ret' stores the buffer's status if it's
+		 * ready to be processed. Afterwards, it holds the status if
+		 * it was processed successfully.
+		 */
+		ret = isp_stat_buf_process(stat, ret);
+
+		if (likely(!stat->sbl_ovl_recover)) {
+			stat->ops->setup_regs(stat, stat->priv);
+		} else {
+			/*
+			 * Using recover config to increase the chance to have
+			 * a good buffer processing and make the H3A module to
+			 * go back to a valid state.
+			 */
+			stat->update = 1;
+			stat->ops->setup_regs(stat, stat->recover_priv);
+			stat->sbl_ovl_recover = 0;
+
+			/*
+			 * Set 'update' in case of the module needs to use
+			 * regular configuration after next buffer.
+			 */
+			stat->update = 1;
+		}
+
+		isp_stat_buf_insert_magic(stat, stat->active_buf);
+
+		/*
+		 * Hack: H3A modules may access invalid memory address or send
+		 * corrupted data to userspace if more than 1 SBL overflow
+		 * happens in a row without re-writing its buffer's start memory
+		 * address in the meantime. Such situation is avoided if the
+		 * module is not immediately re-enabled when the ISR misses the
+		 * timing to process the buffer and to setup the registers.
+		 * Because of that, pcr_enable(1) was moved to inside this 'if'
+		 * block. But the next interruption will still happen as during
+		 * pcr_enable(0) the module was busy.
+		 */
+		isp_stat_pcr_enable(stat, 1);
+		spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags);
+	} else {
+		/*
+		 * If a SBL overflow occurs and the H3A driver misses the timing
+		 * to process the buffer, stat->buf_err is set and won't be
+		 * cleared now. So the next buffer will be correctly ignored.
+		 * It's necessary due to a hw issue which makes the next H3A
+		 * buffer to start from the memory address where the previous
+		 * one stopped, instead of start where it was configured to.
+		 * Do not "stat->buf_err = 0" here.
+		 */
+
+		if (stat->ops->buf_process)
+			/*
+			 * Driver may need to erase current data prior to
+			 * process a new buffer. If it misses the timing, the
+			 * next buffer might be wrong. So should be ignored.
+			 * It happens only for Histogram.
+			 */
+			atomic_set(&stat->buf_err, 1);
+
+		ret = STAT_NO_BUF;
+		dev_dbg(stat->isp->dev, "%s: cannot process buffer, "
+					"device is busy.\n", stat->subdev.name);
+	}
+
+out:
+	stat->buf_processing = 0;
+	isp_stat_queue_event(stat, ret != STAT_BUF_DONE);
+}
+
+void omap3isp_stat_isr(struct ispstat *stat)
+{
+	__stat_isr(stat, 0);
+}
+
+void omap3isp_stat_dma_isr(struct ispstat *stat)
+{
+	__stat_isr(stat, 1);
+}
+
+static int isp_stat_init_entities(struct ispstat *stat, const char *name,
+				  const struct v4l2_subdev_ops *sd_ops)
+{
+	struct v4l2_subdev *subdev = &stat->subdev;
+	struct media_entity *me = &subdev->entity;
+
+	v4l2_subdev_init(subdev, sd_ops);
+	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
+	subdev->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
+	subdev->nevents = STAT_NEVENTS;
+	v4l2_set_subdevdata(subdev, stat);
+
+	stat->pad.flags = MEDIA_PAD_FL_INPUT;
+	me->ops = NULL;
+
+	return media_entity_init(me, 1, &stat->pad, 0);
+}
+
+int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
+				  struct v4l2_fh *fh,
+				  struct v4l2_event_subscription *sub)
+{
+	struct ispstat *stat = v4l2_get_subdevdata(subdev);
+
+	if (sub->type != stat->event_type)
+		return -EINVAL;
+
+	return v4l2_event_subscribe(fh, sub);
+}
+
+int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
+				    struct v4l2_fh *fh,
+				    struct v4l2_event_subscription *sub)
+{
+	return v4l2_event_unsubscribe(fh, sub);
+}
+
+void omap3isp_stat_unregister_entities(struct ispstat *stat)
+{
+	media_entity_cleanup(&stat->subdev.entity);
+	v4l2_device_unregister_subdev(&stat->subdev);
+}
+
+int omap3isp_stat_register_entities(struct ispstat *stat,
+				    struct v4l2_device *vdev)
+{
+	return v4l2_device_register_subdev(vdev, &stat->subdev);
+}
+
+int omap3isp_stat_init(struct ispstat *stat, const char *name,
+		       const struct v4l2_subdev_ops *sd_ops)
+{
+	stat->buf = kcalloc(STAT_MAX_BUFS, sizeof(*stat->buf), GFP_KERNEL);
+	if (!stat->buf)
+		return -ENOMEM;
+	isp_stat_buf_clear(stat);
+	mutex_init(&stat->ioctl_lock);
+	atomic_set(&stat->buf_err, 0);
+
+	return isp_stat_init_entities(stat, name, sd_ops);
+}
+
+void omap3isp_stat_free(struct ispstat *stat)
+{
+	isp_stat_bufs_free(stat);
+	kfree(stat->buf);
+}
diff --git a/drivers/media/video/isp/ispstat.h b/drivers/media/video/isp/ispstat.h
new file mode 100644
index 0000000..5298d33
--- /dev/null
+++ b/drivers/media/video/isp/ispstat.h
@@ -0,0 +1,169 @@
+/*
+ * ispstat.h
+ *
+ * TI OMAP3 ISP - Statistics core
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Contacts: David Cohen <david.cohen@nokia.com>
+ *	     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_STAT_H
+#define OMAP3_ISP_STAT_H
+
+#include <linux/types.h>
+#include <linux/omap3isp.h>
+#include <plat/dma.h>
+#include <media/v4l2-event.h>
+
+#include "isp.h"
+#include "ispvideo.h"
+
+#define STAT_MAX_BUFS		5
+#define STAT_NEVENTS		8
+
+#define STAT_BUF_DONE		0	/* Buffer is ready */
+#define STAT_NO_BUF		1	/* An error has occurred */
+#define STAT_BUF_WAITING_DMA	2	/* Histogram only: DMA is running */
+
+struct ispstat;
+
+struct ispstat_buffer {
+	unsigned long iommu_addr;
+	struct iovm_struct *iovm;
+	void *virt_addr;
+	dma_addr_t dma_addr;
+	struct timeval ts;
+	u32 buf_size;
+	u32 frame_number;
+	u16 config_counter;
+	u8 empty;
+};
+
+struct ispstat_ops {
+	/*
+	 * Validate new params configuration.
+	 * new_conf->buf_size value must be changed to the exact buffer size
+	 * necessary for the new configuration if it's smaller.
+	 */
+	int (*validate_params)(struct ispstat *stat, void *new_conf);
+
+	/*
+	 * Save new params configuration.
+	 * stat->priv->buf_size value must be set to the exact buffer size for
+	 * the new configuration.
+	 * stat->update is set to 1 if new configuration is different than
+	 * current one.
+	 */
+	void (*set_params)(struct ispstat *stat, void *new_conf);
+
+	/* Apply stored configuration. */
+	void (*setup_regs)(struct ispstat *stat, void *priv);
+
+	/* Enable/Disable module. */
+	void (*enable)(struct ispstat *stat, int enable);
+
+	/* Verify is module is busy. */
+	int (*busy)(struct ispstat *stat);
+
+	/* Used for specific operations during generic buf process task. */
+	int (*buf_process)(struct ispstat *stat);
+};
+
+enum ispstat_state_t {
+	ISPSTAT_DISABLED = 0,
+	ISPSTAT_DISABLING,
+	ISPSTAT_ENABLED,
+	ISPSTAT_ENABLING,
+	ISPSTAT_SUSPENDED,
+};
+
+struct ispstat {
+	struct v4l2_subdev subdev;
+	struct media_pad pad;	/* sink pad */
+
+	/* Control */
+	unsigned configured:1;
+	unsigned update:1;
+	unsigned buf_processing:1;
+	unsigned sbl_ovl_recover:1;
+	u8 inc_config;
+	atomic_t buf_err;
+	enum ispstat_state_t state;	/* enabling/disabling state */
+	struct omap_dma_channel_params dma_config;
+	struct isp_device *isp;
+	void *priv;		/* pointer to priv config struct */
+	void *recover_priv;	/* pointer to recover priv configuration */
+	struct mutex ioctl_lock; /* serialize private ioctl */
+
+	const struct ispstat_ops *ops;
+
+	/* Buffer */
+	u8 wait_acc_frames;
+	u16 config_counter;
+	u32 frame_number;
+	u32 buf_size;
+	u32 buf_alloc_size;
+	int dma_ch;
+	unsigned long event_type;
+	struct ispstat_buffer *buf;
+	struct ispstat_buffer *active_buf;
+	struct ispstat_buffer *locked_buf;
+};
+
+struct ispstat_generic_config {
+	/*
+	 * Fields must be in the same order as in:
+	 *  - isph3a_aewb_config
+	 *  - isph3a_af_config
+	 *  - isphist_config
+	 */
+	u32 buf_size;
+	u16 config_counter;
+};
+
+int omap3isp_stat_config(struct ispstat *stat, void *new_conf);
+int omap3isp_stat_request_statistics(struct ispstat *stat,
+				     struct omap3isp_stat_data *data);
+int omap3isp_stat_init(struct ispstat *stat, const char *name,
+		       const struct v4l2_subdev_ops *sd_ops);
+void omap3isp_stat_free(struct ispstat *stat);
+int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
+				  struct v4l2_fh *fh,
+				  struct v4l2_event_subscription *sub);
+int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
+				    struct v4l2_fh *fh,
+				    struct v4l2_event_subscription *sub);
+int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable);
+
+int omap3isp_stat_busy(struct ispstat *stat);
+int omap3isp_stat_pcr_busy(struct ispstat *stat);
+void omap3isp_stat_suspend(struct ispstat *stat);
+void omap3isp_stat_resume(struct ispstat *stat);
+int omap3isp_stat_enable(struct ispstat *stat, u8 enable);
+void omap3isp_stat_sbl_overflow(struct ispstat *stat);
+void omap3isp_stat_isr(struct ispstat *stat);
+void omap3isp_stat_isr_frame_sync(struct ispstat *stat);
+void omap3isp_stat_dma_isr(struct ispstat *stat);
+int omap3isp_stat_register_entities(struct ispstat *stat,
+				    struct v4l2_device *vdev);
+void omap3isp_stat_unregister_entities(struct ispstat *stat);
+
+#endif /* OMAP3_ISP_STAT_H */
diff --git a/drivers/media/video/isp/ispvideo.c b/drivers/media/video/isp/ispvideo.c
new file mode 100644
index 0000000..ef0adb0
--- /dev/null
+++ b/drivers/media/video/isp/ispvideo.c
@@ -0,0 +1,1264 @@
+/*
+ * ispvideo.c
+ *
+ * TI OMAP3 ISP - Generic video node
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/clk.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/scatterlist.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
+#include <plat/omap-pm.h>
+
+#include "ispvideo.h"
+#include "isp.h"
+
+
+/* -----------------------------------------------------------------------------
+ * Helper functions
+ */
+
+static struct isp_format_info formats[] = {
+	{ V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8,
+	  V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, },
+	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8,
+	  V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, },
+	{ V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10,
+	  V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10, 10, },
+	{ V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10,
+	  V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10, 10, },
+	{ V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10,
+	  V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10, 10, },
+	{ V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10,
+	  V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10, 10, },
+	{ V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10,
+	  V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12, 12, },
+	{ V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10,
+	  V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12, 12, },
+	{ V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10,
+	  V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12, 12, },
+	{ V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10,
+	  V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12, 12, },
+	{ V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16,
+	  V4L2_MBUS_FMT_UYVY8_1X16, V4L2_PIX_FMT_UYVY, 16, },
+	{ V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16,
+	  V4L2_MBUS_FMT_YUYV8_1X16, V4L2_PIX_FMT_YUYV, 16, },
+};
+
+const struct isp_format_info *
+omap3isp_video_format_info(enum v4l2_mbus_pixelcode code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (formats[i].code == code)
+			return &formats[i];
+	}
+
+	return NULL;
+}
+
+/*
+ * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format
+ * @video: ISP video instance
+ * @mbus: v4l2_mbus_framefmt format (input)
+ * @pix: v4l2_pix_format format (output)
+ *
+ * Fill the output pix structure with information from the input mbus format.
+ * The bytesperline and sizeimage fields are computed from the requested bytes
+ * per line value in the pix format and information from the video instance.
+ *
+ * Return the number of padding bytes at end of line.
+ */
+static unsigned int isp_video_mbus_to_pix(const struct isp_video *video,
+					  const struct v4l2_mbus_framefmt *mbus,
+					  struct v4l2_pix_format *pix)
+{
+	unsigned int bpl = pix->bytesperline;
+	unsigned int min_bpl;
+	unsigned int i;
+
+	memset(pix, 0, sizeof(*pix));
+	pix->width = mbus->width;
+	pix->height = mbus->height;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (formats[i].code == mbus->code)
+			break;
+	}
+
+	if (WARN_ON(i == ARRAY_SIZE(formats)))
+		return 0;
+
+	min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8;
+
+	/* Clamp the requested bytes per line value. If the maximum bytes per
+	 * line value is zero, the module doesn't support user configurable line
+	 * sizes. Override the requested value with the minimum in that case.
+	 */
+	if (video->bpl_max)
+		bpl = clamp(bpl, min_bpl, video->bpl_max);
+	else
+		bpl = min_bpl;
+
+	if (!video->bpl_zero_padding || bpl != min_bpl)
+		bpl = ALIGN(bpl, video->bpl_alignment);
+
+	pix->pixelformat = formats[i].pixelformat;
+	pix->bytesperline = bpl;
+	pix->sizeimage = pix->bytesperline * pix->height;
+	pix->colorspace = mbus->colorspace;
+	pix->field = mbus->field;
+
+	return bpl - min_bpl;
+}
+
+static void isp_video_pix_to_mbus(const struct v4l2_pix_format *pix,
+				  struct v4l2_mbus_framefmt *mbus)
+{
+	unsigned int i;
+
+	memset(mbus, 0, sizeof(*mbus));
+	mbus->width = pix->width;
+	mbus->height = pix->height;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (formats[i].pixelformat == pix->pixelformat)
+			break;
+	}
+
+	if (WARN_ON(i == ARRAY_SIZE(formats)))
+		return;
+
+	mbus->code = formats[i].code;
+	mbus->colorspace = pix->colorspace;
+	mbus->field = pix->field;
+}
+
+static struct v4l2_subdev *
+isp_video_remote_subdev(struct isp_video *video, u32 *pad)
+{
+	struct media_pad *remote;
+
+	remote = media_entity_remote_source(&video->pad);
+
+	if (remote == NULL ||
+	    media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+		return NULL;
+
+	if (pad)
+		*pad = remote->index;
+
+	return media_entity_to_v4l2_subdev(remote->entity);
+}
+
+/* Return a pointer to the ISP video instance at the far end of the pipeline. */
+static struct isp_video *
+isp_video_far_end(struct isp_video *video)
+{
+	struct media_entity_graph graph;
+	struct media_entity *entity = &video->video.entity;
+	struct media_device *mdev = entity->parent;
+	struct isp_video *far_end = NULL;
+
+	mutex_lock(&mdev->graph_mutex);
+	media_entity_graph_walk_start(&graph, entity);
+
+	while ((entity = media_entity_graph_walk_next(&graph))) {
+		if (entity == &video->video.entity)
+			continue;
+
+		if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE)
+			continue;
+
+		far_end = to_isp_video(media_entity_to_video_device(entity));
+		if (far_end->type != video->type)
+			break;
+
+		far_end = NULL;
+	}
+
+	mutex_unlock(&mdev->graph_mutex);
+	return far_end;
+}
+
+/*
+ * Validate a pipeline by checking both ends of all links for format
+ * discrepancies.
+ *
+ * Compute the minimum time per frame value as the maximum of time per frame
+ * limits reported by every block in the pipeline.
+ *
+ * Return 0 if all formats match, or -EPIPE if at least one link is found with
+ * different formats on its two ends.
+ */
+static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
+{
+	struct isp_device *isp = pipe->output->isp;
+	struct v4l2_subdev_format fmt_source;
+	struct v4l2_subdev_format fmt_sink;
+	struct media_pad *pad;
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	pipe->max_rate = pipe->l3_ick;
+
+	subdev = isp_video_remote_subdev(pipe->output, NULL);
+	if (subdev == NULL)
+		return -EPIPE;
+
+	while (1) {
+		/* Retrieve the sink format */
+		pad = &subdev->entity.pads[0];
+		if (!(pad->flags & MEDIA_PAD_FL_INPUT))
+			break;
+
+		fmt_sink.pad = pad->index;
+		fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_sink);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			return -EPIPE;
+
+		/* Update the maximum frame rate */
+		if (subdev == &isp->isp_res.subdev)
+			omap3isp_resizer_max_rate(&isp->isp_res,
+						  &pipe->max_rate);
+
+		/* Check ccdc maximum data rate when data comes from sensor
+		 * TODO: Include ccdc rate in pipe->max_rate and compare the
+		 *       total pipe rate with the input data rate from sensor.
+		 */
+		if (subdev == &isp->isp_ccdc.subdev && pipe->input == NULL) {
+			unsigned int rate = UINT_MAX;
+
+			omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
+			if (isp->isp_ccdc.vpcfg.pixelclk > rate)
+				return -ENOSPC;
+		}
+
+		/* Retrieve the source format */
+		pad = media_entity_remote_source(pad);
+		if (pad == NULL ||
+		    media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
+			break;
+
+		subdev = media_entity_to_v4l2_subdev(pad->entity);
+
+		fmt_source.pad = pad->index;
+		fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
+			return -EPIPE;
+
+		/* Check if the two ends match */
+		if (fmt_source.format.code != fmt_sink.format.code ||
+		    fmt_source.format.width != fmt_sink.format.width ||
+		    fmt_source.format.height != fmt_sink.format.height)
+			return -EPIPE;
+	}
+
+	return 0;
+}
+
+static int
+__isp_video_get_format(struct isp_video *video, struct v4l2_format *format)
+{
+	struct v4l2_subdev_format fmt;
+	struct v4l2_subdev *subdev;
+	u32 pad;
+	int ret;
+
+	subdev = isp_video_remote_subdev(video, &pad);
+	if (subdev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&video->mutex);
+
+	fmt.pad = pad;
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
+	if (ret == -ENOIOCTLCMD)
+		ret = -EINVAL;
+
+	mutex_unlock(&video->mutex);
+
+	if (ret)
+		return ret;
+
+	format->type = video->type;
+	return isp_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix);
+}
+
+static int
+isp_video_check_format(struct isp_video *video, struct isp_video_fh *vfh)
+{
+	struct v4l2_format format;
+	int ret;
+
+	memcpy(&format, &vfh->format, sizeof(format));
+	ret = __isp_video_get_format(video, &format);
+	if (ret < 0)
+		return ret;
+
+	if (vfh->format.fmt.pix.pixelformat != format.fmt.pix.pixelformat ||
+	    vfh->format.fmt.pix.height != format.fmt.pix.height ||
+	    vfh->format.fmt.pix.width != format.fmt.pix.width ||
+	    vfh->format.fmt.pix.bytesperline != format.fmt.pix.bytesperline ||
+	    vfh->format.fmt.pix.sizeimage != format.fmt.pix.sizeimage)
+		return -EINVAL;
+
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * IOMMU management
+ */
+
+#define IOMMU_FLAG	(IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_8)
+
+/*
+ * ispmmu_vmap - Wrapper for Virtual memory mapping of a scatter gather list
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @sglist: Pointer to source Scatter gather list to allocate.
+ * @sglen: Number of elements of the scatter-gatter list.
+ *
+ * Returns a resulting mapped device address by the ISP MMU, or -ENOMEM if
+ * we ran out of memory.
+ */
+static dma_addr_t
+ispmmu_vmap(struct isp_device *isp, const struct scatterlist *sglist, int sglen)
+{
+	struct sg_table *sgt;
+	u32 da;
+
+	sgt = kmalloc(sizeof(*sgt), GFP_KERNEL);
+	if (sgt == NULL)
+		return -ENOMEM;
+
+	sgt->sgl = (struct scatterlist *)sglist;
+	sgt->nents = sglen;
+	sgt->orig_nents = sglen;
+
+	da = iommu_vmap(isp->iommu, 0, sgt, IOMMU_FLAG);
+	if (IS_ERR_VALUE(da))
+		kfree(sgt);
+
+	return da;
+}
+
+/*
+ * ispmmu_vunmap - Unmap a device address from the ISP MMU
+ * @dev: Device pointer specific to the OMAP3 ISP.
+ * @da: Device address generated from a ispmmu_vmap call.
+ */
+static void ispmmu_vunmap(struct isp_device *isp, dma_addr_t da)
+{
+	struct sg_table *sgt;
+
+	sgt = iommu_vunmap(isp->iommu, (u32)da);
+	kfree(sgt);
+}
+
+/* -----------------------------------------------------------------------------
+ * Video queue operations
+ */
+
+static void isp_video_queue_prepare(struct isp_video_queue *queue,
+				    unsigned int *nbuffers, unsigned int *size)
+{
+	struct isp_video_fh *vfh =
+		container_of(queue, struct isp_video_fh, queue);
+	struct isp_video *video = vfh->video;
+
+	*size = vfh->format.fmt.pix.sizeimage;
+	if (*size == 0)
+		return;
+
+	*nbuffers = min(*nbuffers, video->capture_mem / PAGE_ALIGN(*size));
+}
+
+static void isp_video_buffer_cleanup(struct isp_video_buffer *buf)
+{
+	struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue);
+	struct isp_buffer *buffer = to_isp_buffer(buf);
+	struct isp_video *video = vfh->video;
+
+	if (buffer->isp_addr) {
+		ispmmu_vunmap(video->isp, buffer->isp_addr);
+		buffer->isp_addr = 0;
+	}
+}
+
+static int isp_video_buffer_prepare(struct isp_video_buffer *buf)
+{
+	struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue);
+	struct isp_buffer *buffer = to_isp_buffer(buf);
+	struct isp_video *video = vfh->video;
+	unsigned long addr;
+
+	addr = ispmmu_vmap(video->isp, buf->sglist, buf->sglen);
+	if (IS_ERR_VALUE(addr))
+		return -EIO;
+
+	if (!IS_ALIGNED(addr, 32)) {
+		dev_dbg(video->isp->dev, "Buffer address must be "
+			"aligned to 32 bytes boundary.\n");
+		ispmmu_vunmap(video->isp, buffer->isp_addr);
+		return -EINVAL;
+	}
+
+	buf->vbuf.bytesused = vfh->format.fmt.pix.sizeimage;
+	buffer->isp_addr = addr;
+	return 0;
+}
+
+/*
+ * isp_video_buffer_queue - Add buffer to streaming queue
+ * @buf: Video buffer
+ *
+ * In memory-to-memory mode, start streaming on the pipeline if buffers are
+ * queued on both the input and the output, if the pipeline isn't already busy.
+ * If the pipeline is busy, it will be restarted in the output module interrupt
+ * handler.
+ */
+static void isp_video_buffer_queue(struct isp_video_buffer *buf)
+{
+	struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue);
+	struct isp_buffer *buffer = to_isp_buffer(buf);
+	struct isp_video *video = vfh->video;
+	struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity);
+	enum isp_pipeline_state state;
+	unsigned long flags;
+	unsigned int empty;
+	unsigned int start;
+
+	empty = list_empty(&video->dmaqueue);
+	list_add_tail(&buffer->buffer.irqlist, &video->dmaqueue);
+
+	if (empty) {
+		if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			state = ISP_PIPELINE_QUEUE_OUTPUT;
+		else
+			state = ISP_PIPELINE_QUEUE_INPUT;
+
+		spin_lock_irqsave(&pipe->lock, flags);
+		pipe->state |= state;
+		video->ops->queue(video, buffer);
+		video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_QUEUED;
+
+		start = isp_pipeline_ready(pipe);
+		if (start)
+			pipe->state |= ISP_PIPELINE_STREAM;
+		spin_unlock_irqrestore(&pipe->lock, flags);
+
+		if (start)
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+	}
+}
+
+static const struct isp_video_queue_operations isp_video_queue_ops = {
+	.queue_prepare = &isp_video_queue_prepare,
+	.buffer_prepare = &isp_video_buffer_prepare,
+	.buffer_queue = &isp_video_buffer_queue,
+	.buffer_cleanup = &isp_video_buffer_cleanup,
+};
+
+/*
+ * omap3isp_video_buffer_next - Complete the current buffer and return the next
+ * @video: ISP video object
+ * @error: Whether an error occured during capture
+ *
+ * Remove the current video buffer from the DMA queue and fill its timestamp,
+ * field count and state fields before waking up its completion handler.
+ *
+ * The buffer state is set to VIDEOBUF_DONE if no error occured (@error is 0)
+ * or VIDEOBUF_ERROR otherwise (@error is non-zero).
+ *
+ * The DMA queue is expected to contain at least one buffer.
+ *
+ * Return a pointer to the next buffer in the DMA queue, or NULL if the queue is
+ * empty.
+ */
+struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video,
+					      unsigned int error)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity);
+	struct isp_video_queue *queue = video->queue;
+	enum isp_pipeline_state state;
+	struct isp_video_buffer *buf;
+	unsigned long flags;
+	struct timespec ts;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	if (WARN_ON(list_empty(&video->dmaqueue))) {
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+		return NULL;
+	}
+
+	buf = list_first_entry(&video->dmaqueue, struct isp_video_buffer,
+			       irqlist);
+	list_del(&buf->irqlist);
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+
+	ktime_get_ts(&ts);
+	buf->vbuf.timestamp.tv_sec = ts.tv_sec;
+	buf->vbuf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+
+	/* Do frame number propagation only if this is the output video node.
+	 * Frame number either comes from the CSI receivers or it gets
+	 * incremented here if H3A is not active.
+	 * Note: There is no guarantee that the output buffer will finish
+	 * first, so the input number might lag behind by 1 in some cases.
+	 */
+	if (video == pipe->output && !pipe->do_propagation)
+		buf->vbuf.sequence = atomic_inc_return(&pipe->frame_number);
+	else
+		buf->vbuf.sequence = atomic_read(&pipe->frame_number);
+
+	buf->state = error ? ISP_BUF_STATE_ERROR : ISP_BUF_STATE_DONE;
+
+	wake_up(&buf->wait);
+
+	if (list_empty(&video->dmaqueue)) {
+		if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			state = ISP_PIPELINE_QUEUE_OUTPUT
+			      | ISP_PIPELINE_STREAM;
+		else
+			state = ISP_PIPELINE_QUEUE_INPUT
+			      | ISP_PIPELINE_STREAM;
+
+		spin_lock_irqsave(&pipe->lock, flags);
+		pipe->state &= ~state;
+		if (video->pipe.stream_state == ISP_PIPELINE_STREAM_CONTINUOUS)
+			video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
+		spin_unlock_irqrestore(&pipe->lock, flags);
+		return NULL;
+	}
+
+	if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && pipe->input != NULL) {
+		spin_lock_irqsave(&pipe->lock, flags);
+		pipe->state &= ~ISP_PIPELINE_STREAM;
+		spin_unlock_irqrestore(&pipe->lock, flags);
+	}
+
+	buf = list_first_entry(&video->dmaqueue, struct isp_video_buffer,
+			       irqlist);
+	buf->state = ISP_BUF_STATE_ACTIVE;
+	return to_isp_buffer(buf);
+}
+
+/*
+ * omap3isp_video_resume - Perform resume operation on the buffers
+ * @video: ISP video object
+ * @continuous: Pipeline is in single shot mode if 0 or continous mode otherwise
+ *
+ * This function is intended to be used on suspend/resume scenario. It
+ * requests video queue layer to discard buffers marked as DONE if it's in
+ * continuous mode and requests ISP modules to queue again the ACTIVE buffer
+ * if there's any.
+ */
+void omap3isp_video_resume(struct isp_video *video, int continuous)
+{
+	struct isp_buffer *buf = NULL;
+
+	if (continuous && video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		omap3isp_video_queue_discard_done(video->queue);
+
+	if (!list_empty(&video->dmaqueue)) {
+		buf = list_first_entry(&video->dmaqueue,
+				       struct isp_buffer, buffer.irqlist);
+		video->ops->queue(video, buf);
+		video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_QUEUED;
+	} else {
+		if (continuous)
+			video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
+	}
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 ioctls
+ */
+
+static int
+isp_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
+{
+	struct isp_video *video = video_drvdata(file);
+
+	strlcpy(cap->driver, ISP_VIDEO_DRIVER_NAME, sizeof(cap->driver));
+	strlcpy(cap->card, video->video.name, sizeof(cap->card));
+	strlcpy(cap->bus_info, "media", sizeof(cap->bus_info));
+	cap->version = ISP_VIDEO_DRIVER_VERSION;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	else
+		cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+
+	return 0;
+}
+
+static int
+isp_video_get_format(struct file *file, void *fh, struct v4l2_format *format)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+
+	if (format->type != video->type)
+		return -EINVAL;
+
+	mutex_lock(&video->mutex);
+	*format = vfh->format;
+	mutex_unlock(&video->mutex);
+
+	return 0;
+}
+
+static int
+isp_video_set_format(struct file *file, void *fh, struct v4l2_format *format)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_mbus_framefmt fmt;
+
+	if (format->type != video->type)
+		return -EINVAL;
+
+	mutex_lock(&video->mutex);
+
+	/* Fill the bytesperline and sizeimage fields by converting to media bus
+	 * format and back to pixel format.
+	 */
+	isp_video_pix_to_mbus(&format->fmt.pix, &fmt);
+	isp_video_mbus_to_pix(video, &fmt, &format->fmt.pix);
+
+	vfh->format = *format;
+
+	mutex_unlock(&video->mutex);
+	return 0;
+}
+
+static int
+isp_video_try_format(struct file *file, void *fh, struct v4l2_format *format)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_subdev_format fmt;
+	struct v4l2_subdev *subdev;
+	u32 pad;
+	int ret;
+
+	if (format->type != video->type)
+		return -EINVAL;
+
+	subdev = isp_video_remote_subdev(video, &pad);
+	if (subdev == NULL)
+		return -EINVAL;
+
+	isp_video_pix_to_mbus(&format->fmt.pix, &fmt.format);
+
+	fmt.pad = pad;
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt);
+	if (ret)
+		return ret == -ENOIOCTLCMD ? -EINVAL : ret;
+
+	isp_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix);
+	return 0;
+}
+
+static int
+isp_video_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	subdev = isp_video_remote_subdev(video, NULL);
+	if (subdev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&video->mutex);
+	ret = v4l2_subdev_call(subdev, video, cropcap, cropcap);
+	mutex_unlock(&video->mutex);
+
+	return ret == -ENOIOCTLCMD ? -EINVAL : ret;
+}
+
+static int
+isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_subdev_format format;
+	struct v4l2_subdev *subdev;
+	u32 pad;
+	int ret;
+
+	subdev = isp_video_remote_subdev(video, &pad);
+	if (subdev == NULL)
+		return -EINVAL;
+
+	/* Try the get crop operation first and fallback to get format if not
+	 * implemented.
+	 */
+	ret = v4l2_subdev_call(subdev, video, g_crop, crop);
+	if (ret != -ENOIOCTLCMD)
+		return ret;
+
+	format.pad = pad;
+	format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &format);
+	if (ret < 0)
+		return ret == -ENOIOCTLCMD ? -EINVAL : ret;
+
+	crop->c.left = 0;
+	crop->c.top = 0;
+	crop->c.width = format.format.width;
+	crop->c.height = format.format.height;
+
+	return 0;
+}
+
+static int
+isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	subdev = isp_video_remote_subdev(video, NULL);
+	if (subdev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&video->mutex);
+	ret = v4l2_subdev_call(subdev, video, s_crop, crop);
+	mutex_unlock(&video->mutex);
+
+	return ret == -ENOIOCTLCMD ? -EINVAL : ret;
+}
+
+static int
+isp_video_get_param(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+
+	if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
+	    video->type != a->type)
+		return -EINVAL;
+
+	memset(a, 0, sizeof(*a));
+	a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	a->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
+	a->parm.output.timeperframe = vfh->timeperframe;
+
+	return 0;
+}
+
+static int
+isp_video_set_param(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+
+	if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
+	    video->type != a->type)
+		return -EINVAL;
+
+	if (a->parm.output.timeperframe.denominator == 0)
+		a->parm.output.timeperframe.denominator = 1;
+
+	vfh->timeperframe = a->parm.output.timeperframe;
+
+	return 0;
+}
+
+static int
+isp_video_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+
+	return omap3isp_video_queue_reqbufs(&vfh->queue, rb);
+}
+
+static int
+isp_video_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+
+	return omap3isp_video_queue_querybuf(&vfh->queue, b);
+}
+
+static int
+isp_video_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+
+	return omap3isp_video_queue_qbuf(&vfh->queue, b);
+}
+
+static int
+isp_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+
+	return omap3isp_video_queue_dqbuf(&vfh->queue, b,
+					  file->f_flags & O_NONBLOCK);
+}
+
+/*
+ * Stream management
+ *
+ * Every ISP pipeline has a single input and a single output. The input can be
+ * either a sensor or a video node. The output is always a video node.
+ *
+ * As every pipeline has an output video node, the ISP video objects at the
+ * pipeline output stores the pipeline state. It tracks the streaming state of
+ * both the input and output, as well as the availability of buffers.
+ *
+ * In sensor-to-memory mode, frames are always available at the pipeline input.
+ * Starting the sensor usually requires I2C transfers and must be done in
+ * interruptible context. The pipeline is started and stopped synchronously
+ * to the stream on/off commands. All modules in the pipeline will get their
+ * subdev set stream handler called. The module at the end of the pipeline must
+ * delay starting the hardware until buffers are available at its output.
+ *
+ * In memory-to-memory mode, starting/stopping the stream requires
+ * synchronization between the input and output. ISP modules can't be stopped
+ * in the middle of a frame, and at least some of the modules seem to become
+ * busy as soon as they're started, even if they don't receive a frame start
+ * event. For that reason frames need to be processed in single-shot mode. The
+ * driver needs to wait until a frame is completely processed and written to
+ * memory before restarting the pipeline for the next frame. Pipelined
+ * processing might be possible but requires more testing.
+ *
+ * Stream start must be delayed until buffers are available at both the input
+ * and output. The pipeline must be started in the videobuf queue callback with
+ * the buffers queue spinlock held. The modules subdev set stream operation must
+ * not sleep.
+ */
+static int
+isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+	enum isp_pipeline_state state;
+	struct isp_pipeline *pipe;
+	struct isp_video *far_end;
+	unsigned long flags;
+	int ret;
+
+	if (type != video->type)
+		return -EINVAL;
+
+	mutex_lock(&video->stream_lock);
+
+	if (video->streaming) {
+		mutex_unlock(&video->stream_lock);
+		return -EBUSY;
+	}
+
+	/* Start streaming on the pipeline. No link touching an entity in the
+	 * pipeline can be activated or deactivated once streaming is started.
+	 */
+	pipe = video->video.entity.pipe
+	     ? to_isp_pipeline(&video->video.entity) : &video->pipe;
+	media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
+
+	/* Verify that the currently configured format matches the output of
+	 * the connected subdev.
+	 */
+	ret = isp_video_check_format(video, vfh);
+	if (ret < 0)
+		goto error;
+
+	video->bpl_padding = ret;
+	video->bpl_value = vfh->format.fmt.pix.bytesperline;
+
+	/* Find the ISP video node connected at the far end of the pipeline and
+	 * update the pipeline.
+	 */
+	far_end = isp_video_far_end(video);
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT;
+		pipe->input = far_end;
+		pipe->output = video;
+	} else {
+		if (far_end == NULL) {
+			ret = -EPIPE;
+			goto error;
+		}
+
+		state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT;
+		pipe->input = video;
+		pipe->output = far_end;
+	}
+
+	/* Make sure the interconnect clock runs fast enough.
+	 *
+	 * Formula from: resource34xx.c set_opp()
+	 * If MPU freq is above 500MHz, make sure the interconnect
+	 * is at 100Mhz or above.
+	 * throughput in KiB/s for 100 Mhz = 100 * 1000 * 4.
+	 *
+	 * We want to be fast enough then set OCP clock to be max as
+	 * possible, in that case 185Mhz then:
+	 * throughput in KiB/s for 185Mhz = 185 * 1000 * 4 = 740000 KiB/s
+	 */
+	omap_pm_set_min_bus_tput(video->isp->dev, OCP_INITIATOR_AGENT, 740000);
+	pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]);
+
+	/* Validate the pipeline and update its state. */
+	ret = isp_video_validate_pipeline(pipe);
+	if (ret < 0)
+		goto error;
+
+	spin_lock_irqsave(&pipe->lock, flags);
+	pipe->state &= ~ISP_PIPELINE_STREAM;
+	pipe->state |= state;
+	spin_unlock_irqrestore(&pipe->lock, flags);
+
+	/* Set the maximum time per frame as the value requested by userspace.
+	 * This is a soft limit that can be overridden if the hardware doesn't
+	 * support the request limit.
+	 */
+	if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		pipe->max_timeperframe = vfh->timeperframe;
+
+	video->queue = &vfh->queue;
+	INIT_LIST_HEAD(&video->dmaqueue);
+	atomic_set(&pipe->frame_number, -1);
+
+	ret = omap3isp_video_queue_streamon(&vfh->queue);
+	if (ret < 0)
+		goto error;
+
+	/* In sensor-to-memory mode, the stream can be started synchronously
+	 * to the stream on command. In memory-to-memory mode, it will be
+	 * started when buffers are queued on both the input and output.
+	 */
+	if (pipe->input == NULL) {
+		ret = omap3isp_pipeline_set_stream(pipe,
+					      ISP_PIPELINE_STREAM_CONTINUOUS);
+		if (ret < 0)
+			goto error;
+		spin_lock_irqsave(&video->queue->irqlock, flags);
+		if (list_empty(&video->dmaqueue))
+			video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
+		spin_unlock_irqrestore(&video->queue->irqlock, flags);
+	}
+
+error:
+	if (ret < 0) {
+		omap3isp_video_queue_streamoff(&vfh->queue);
+		omap_pm_set_min_bus_tput(video->isp->dev,
+					 OCP_INITIATOR_AGENT, 0);
+		media_entity_pipeline_stop(&video->video.entity);
+		video->queue = NULL;
+	}
+
+	if (!ret)
+		video->streaming = 1;
+
+	mutex_unlock(&video->stream_lock);
+	return ret;
+}
+
+static int
+isp_video_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(fh);
+	struct isp_video *video = video_drvdata(file);
+	struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity);
+	enum isp_pipeline_state state;
+	unsigned int streaming;
+	unsigned long flags;
+
+	if (type != video->type)
+		return -EINVAL;
+
+	mutex_lock(&video->stream_lock);
+
+	/* Make sure we're not streaming yet. */
+	mutex_lock(&vfh->queue.lock);
+	streaming = vfh->queue.streaming;
+	mutex_unlock(&vfh->queue.lock);
+
+	if (!streaming)
+		goto done;
+
+	/* Update the pipeline state. */
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		state = ISP_PIPELINE_STREAM_OUTPUT
+		      | ISP_PIPELINE_QUEUE_OUTPUT;
+	else
+		state = ISP_PIPELINE_STREAM_INPUT
+		      | ISP_PIPELINE_QUEUE_INPUT;
+
+	spin_lock_irqsave(&pipe->lock, flags);
+	pipe->state &= ~state;
+	spin_unlock_irqrestore(&pipe->lock, flags);
+
+	/* Stop the stream. */
+	omap3isp_pipeline_set_stream(pipe, ISP_PIPELINE_STREAM_STOPPED);
+	omap3isp_video_queue_streamoff(&vfh->queue);
+	video->queue = NULL;
+	video->streaming = 0;
+
+	omap_pm_set_min_bus_tput(video->isp->dev, OCP_INITIATOR_AGENT, 0);
+	media_entity_pipeline_stop(&video->video.entity);
+
+done:
+	mutex_unlock(&video->stream_lock);
+	return 0;
+}
+
+static int
+isp_video_enum_input(struct file *file, void *fh, struct v4l2_input *input)
+{
+	if (input->index > 0)
+		return -EINVAL;
+
+	strlcpy(input->name, "camera", sizeof(input->name));
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+
+	return 0;
+}
+
+static int
+isp_video_g_input(struct file *file, void *fh, unsigned int *input)
+{
+	*input = 0;
+
+	return 0;
+}
+
+static int
+isp_video_s_input(struct file *file, void *fh, unsigned int input)
+{
+	return input == 0 ? 0 : -EINVAL;
+}
+
+static const struct v4l2_ioctl_ops isp_video_ioctl_ops = {
+	.vidioc_querycap		= isp_video_querycap,
+	.vidioc_g_fmt_vid_cap		= isp_video_get_format,
+	.vidioc_s_fmt_vid_cap		= isp_video_set_format,
+	.vidioc_try_fmt_vid_cap		= isp_video_try_format,
+	.vidioc_g_fmt_vid_out		= isp_video_get_format,
+	.vidioc_s_fmt_vid_out		= isp_video_set_format,
+	.vidioc_try_fmt_vid_out		= isp_video_try_format,
+	.vidioc_cropcap			= isp_video_cropcap,
+	.vidioc_g_crop			= isp_video_get_crop,
+	.vidioc_s_crop			= isp_video_set_crop,
+	.vidioc_g_parm			= isp_video_get_param,
+	.vidioc_s_parm			= isp_video_set_param,
+	.vidioc_reqbufs			= isp_video_reqbufs,
+	.vidioc_querybuf		= isp_video_querybuf,
+	.vidioc_qbuf			= isp_video_qbuf,
+	.vidioc_dqbuf			= isp_video_dqbuf,
+	.vidioc_streamon		= isp_video_streamon,
+	.vidioc_streamoff		= isp_video_streamoff,
+	.vidioc_enum_input		= isp_video_enum_input,
+	.vidioc_g_input			= isp_video_g_input,
+	.vidioc_s_input			= isp_video_s_input,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 file operations
+ */
+
+static int isp_video_open(struct file *file)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct isp_video_fh *handle;
+	int ret = 0;
+
+	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+	if (handle == NULL)
+		return -ENOMEM;
+
+	v4l2_fh_init(&handle->vfh, &video->video);
+	v4l2_fh_add(&handle->vfh);
+
+	/* If this is the first user, initialise the pipeline. */
+	if (omap3isp_get(video->isp) == NULL) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	ret = omap3isp_pipeline_pm_use(&video->video.entity, 1);
+	if (ret < 0) {
+		omap3isp_put(video->isp);
+		goto done;
+	}
+
+	omap3isp_video_queue_init(&handle->queue, video->type,
+				  &isp_video_queue_ops, video->isp->dev,
+				  sizeof(struct isp_buffer));
+
+	memset(&handle->format, 0, sizeof(handle->format));
+	handle->format.type = video->type;
+	handle->timeperframe.denominator = 1;
+
+	handle->video = video;
+	file->private_data = &handle->vfh;
+
+done:
+	if (ret < 0) {
+		v4l2_fh_del(&handle->vfh);
+		kfree(handle);
+	}
+
+	return ret;
+}
+
+static int isp_video_release(struct file *file)
+{
+	struct isp_video *video = video_drvdata(file);
+	struct v4l2_fh *vfh = file->private_data;
+	struct isp_video_fh *handle = to_isp_video_fh(vfh);
+
+	/* Disable streaming and free the buffers queue resources. */
+	isp_video_streamoff(file, vfh, video->type);
+
+	mutex_lock(&handle->queue.lock);
+	omap3isp_video_queue_cleanup(&handle->queue);
+	mutex_unlock(&handle->queue.lock);
+
+	omap3isp_pipeline_pm_use(&video->video.entity, 0);
+
+	/* Release the file handle. */
+	v4l2_fh_del(vfh);
+	kfree(handle);
+	file->private_data = NULL;
+
+	omap3isp_put(video->isp);
+
+	return 0;
+}
+
+static unsigned int isp_video_poll(struct file *file, poll_table *wait)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(file->private_data);
+	struct isp_video_queue *queue = &vfh->queue;
+
+	return omap3isp_video_queue_poll(queue, file, wait);
+}
+
+static int isp_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct isp_video_fh *vfh = to_isp_video_fh(file->private_data);
+
+	return omap3isp_video_queue_mmap(&vfh->queue, vma);
+}
+
+static struct v4l2_file_operations isp_video_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = video_ioctl2,
+	.open = isp_video_open,
+	.release = isp_video_release,
+	.poll = isp_video_poll,
+	.mmap = isp_video_mmap,
+};
+
+/* -----------------------------------------------------------------------------
+ * ISP video core
+ */
+
+static const struct isp_video_operations isp_video_dummy_ops = {
+};
+
+int omap3isp_video_init(struct isp_video *video, const char *name)
+{
+	const char *direction;
+	int ret;
+
+	switch (video->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		direction = "output";
+		video->pad.flags = MEDIA_PAD_FL_INPUT;
+		break;
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		direction = "input";
+		video->pad.flags = MEDIA_PAD_FL_OUTPUT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	ret = media_entity_init(&video->video.entity, 1, &video->pad, 0);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&video->mutex);
+	atomic_set(&video->active, 0);
+
+	spin_lock_init(&video->pipe.lock);
+	mutex_init(&video->stream_lock);
+
+	/* Initialize the video device. */
+	if (video->ops == NULL)
+		video->ops = &isp_video_dummy_ops;
+
+	video->video.fops = &isp_video_fops;
+	snprintf(video->video.name, sizeof(video->video.name),
+		 "OMAP3 ISP %s %s", name, direction);
+	video->video.vfl_type = VFL_TYPE_GRABBER;
+	video->video.release = video_device_release_empty;
+	video->video.ioctl_ops = &isp_video_ioctl_ops;
+	video->pipe.stream_state = ISP_PIPELINE_STREAM_STOPPED;
+
+	video_set_drvdata(&video->video, video);
+
+	return 0;
+}
+
+int omap3isp_video_register(struct isp_video *video, struct v4l2_device *vdev)
+{
+	int ret;
+
+	video->video.v4l2_dev = vdev;
+
+	ret = video_register_device(&video->video, VFL_TYPE_GRABBER, -1);
+	if (ret < 0)
+		printk(KERN_ERR "%s: could not register video device (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+void omap3isp_video_unregister(struct isp_video *video)
+{
+	if (video_is_registered(&video->video)) {
+		media_entity_cleanup(&video->video.entity);
+		video_unregister_device(&video->video);
+	}
+}
diff --git a/drivers/media/video/isp/ispvideo.h b/drivers/media/video/isp/ispvideo.h
new file mode 100644
index 0000000..41c8fb9
--- /dev/null
+++ b/drivers/media/video/isp/ispvideo.h
@@ -0,0 +1,202 @@
+/*
+ * ispvideo.h
+ *
+ * TI OMAP3 ISP - Generic video node
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_VIDEO_H
+#define OMAP3_ISP_VIDEO_H
+
+#include <linux/v4l2-mediabus.h>
+#include <linux/version.h>
+#include <media/media-entity.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+
+#include "ispqueue.h"
+
+#define ISP_VIDEO_DRIVER_NAME		"ispvideo"
+#define ISP_VIDEO_DRIVER_VERSION	KERNEL_VERSION(0, 0, 1)
+
+struct isp_device;
+struct isp_video;
+struct v4l2_mbus_framefmt;
+struct v4l2_pix_format;
+
+/*
+ * struct isp_format_info - ISP media bus format information
+ * @code: V4L2 media bus format code
+ * @truncated: V4L2 media bus format code for the same format truncated to 10
+ * 	bits. Identical to @code if the format is 10 bits wide or less.
+ * @uncompressed: V4L2 media bus format code for the corresponding uncompressed
+ * 	format. Identical to @code if the format is not DPCM compressed.
+ * @pixelformat: V4L2 pixel format FCC identifier
+ * @bpp: Bits per pixel
+ */
+struct isp_format_info {
+	enum v4l2_mbus_pixelcode code;
+	enum v4l2_mbus_pixelcode truncated;
+	enum v4l2_mbus_pixelcode uncompressed;
+	u32 pixelformat;
+	unsigned int bpp;
+};
+
+enum isp_pipeline_stream_state {
+	ISP_PIPELINE_STREAM_STOPPED = 0,
+	ISP_PIPELINE_STREAM_CONTINUOUS = 1,
+	ISP_PIPELINE_STREAM_SINGLESHOT = 2,
+};
+
+enum isp_pipeline_state {
+	/* The stream has been started on the input video node. */
+	ISP_PIPELINE_STREAM_INPUT = 1,
+	/* The stream has been started on the output video node. */
+	ISP_PIPELINE_STREAM_OUTPUT = 2,
+	/* At least one buffer is queued on the input video node. */
+	ISP_PIPELINE_QUEUE_INPUT = 4,
+	/* At least one buffer is queued on the output video node. */
+	ISP_PIPELINE_QUEUE_OUTPUT = 8,
+	/* The input entity is idle, ready to be started. */
+	ISP_PIPELINE_IDLE_INPUT = 16,
+	/* The output entity is idle, ready to be started. */
+	ISP_PIPELINE_IDLE_OUTPUT = 32,
+	/* The pipeline is currently streaming. */
+	ISP_PIPELINE_STREAM = 64,
+};
+
+struct isp_pipeline {
+	struct media_pipeline pipe;
+	spinlock_t lock;
+	unsigned int state;
+	enum isp_pipeline_stream_state stream_state;
+	struct isp_video *input;
+	struct isp_video *output;
+	unsigned long l3_ick;
+	unsigned int max_rate;
+	atomic_t frame_number;
+	bool do_propagation; /* of frame number */
+	struct v4l2_fract max_timeperframe;
+};
+
+#define to_isp_pipeline(__e) \
+	container_of((__e)->pipe, struct isp_pipeline, pipe)
+
+static inline int isp_pipeline_ready(struct isp_pipeline *pipe)
+{
+	return pipe->state == (ISP_PIPELINE_STREAM_INPUT |
+			       ISP_PIPELINE_STREAM_OUTPUT |
+			       ISP_PIPELINE_QUEUE_INPUT |
+			       ISP_PIPELINE_QUEUE_OUTPUT |
+			       ISP_PIPELINE_IDLE_INPUT |
+			       ISP_PIPELINE_IDLE_OUTPUT);
+}
+
+/*
+ * struct isp_buffer - ISP buffer
+ * @buffer: ISP video buffer
+ * @isp_addr: MMU mapped address (a.k.a. device address) of the buffer.
+ */
+struct isp_buffer {
+	struct isp_video_buffer buffer;
+	dma_addr_t isp_addr;
+};
+
+#define to_isp_buffer(buf)	container_of(buf, struct isp_buffer, buffer)
+
+enum isp_video_dmaqueue_flags {
+	/* Set if DMA queue becomes empty when ISP_PIPELINE_STREAM_CONTINUOUS */
+	ISP_VIDEO_DMAQUEUE_UNDERRUN = (1 << 0),
+	/* Set when queuing buffer to an empty DMA queue */
+	ISP_VIDEO_DMAQUEUE_QUEUED = (1 << 1),
+};
+
+#define isp_video_dmaqueue_flags_clr(video)	\
+			({ (video)->dmaqueue_flags = 0; })
+
+/*
+ * struct isp_video_operations - ISP video operations
+ * @queue:	Resume streaming when a buffer is queued. Called on VIDIOC_QBUF
+ *		if there was no buffer previously queued.
+ */
+struct isp_video_operations {
+	int(*queue)(struct isp_video *video, struct isp_buffer *buffer);
+};
+
+struct isp_video {
+	struct video_device video;
+	enum v4l2_buf_type type;
+	struct media_pad pad;
+
+	struct mutex mutex;
+	atomic_t active;
+
+	struct isp_device *isp;
+
+	unsigned int capture_mem;
+	unsigned int bpl_alignment;	/* alignment value */
+	unsigned int bpl_zero_padding;	/* whether the alignment is optional */
+	unsigned int bpl_max;		/* maximum bytes per line value */
+	unsigned int bpl_value;		/* bytes per line value */
+	unsigned int bpl_padding;	/* padding at end of line */
+
+	/* Entity video node streaming */
+	unsigned int streaming:1;
+
+	/* Pipeline state */
+	struct isp_pipeline pipe;
+	struct mutex stream_lock;
+
+	/* Video buffers queue */
+	struct isp_video_queue *queue;
+	struct list_head dmaqueue;
+	enum isp_video_dmaqueue_flags dmaqueue_flags;
+
+	const struct isp_video_operations *ops;
+};
+
+#define to_isp_video(vdev)	container_of(vdev, struct isp_video, video)
+
+struct isp_video_fh {
+	struct v4l2_fh vfh;
+	struct isp_video *video;
+	struct isp_video_queue queue;
+	struct v4l2_format format;
+	struct v4l2_fract timeperframe;
+};
+
+#define to_isp_video_fh(fh)	container_of(fh, struct isp_video_fh, vfh)
+#define isp_video_queue_to_isp_video_fh(q) \
+				container_of(q, struct isp_video_fh, queue)
+
+int omap3isp_video_init(struct isp_video *video, const char *name);
+int omap3isp_video_register(struct isp_video *video,
+			    struct v4l2_device *vdev);
+void omap3isp_video_unregister(struct isp_video *video);
+struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video,
+					      unsigned int error);
+void omap3isp_video_resume(struct isp_video *video, int continuous);
+struct media_pad *omap3isp_video_remote_pad(struct isp_video *video);
+
+const struct isp_format_info *
+omap3isp_video_format_info(enum v4l2_mbus_pixelcode code);
+
+#endif /* OMAP3_ISP_VIDEO_H */
diff --git a/drivers/media/video/isp/luma_enhance_table.h b/drivers/media/video/isp/luma_enhance_table.h
new file mode 100644
index 0000000..56d93c2
--- /dev/null
+++ b/drivers/media/video/isp/luma_enhance_table.h
@@ -0,0 +1,154 @@
+/*
+ * luma_enhance_table.h
+ *
+ * TI OMAP3 ISP - Luminance enhancement table
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1047552,
+1048575,
+1047551,
+1046527,
+1045503,
+1044479,
+1043455,
+1042431,
+1041407,
+1040383,
+1039359,
+1038335,
+1037311,
+1036287,
+1035263,
+1034239,
+1033215,
+1032191,
+1031167,
+1030143,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028096,
+1028100,
+1032196,
+1036292,
+1040388,
+1044484,
+0,
+0,
+0,
+5,
+5125,
+10245,
+15365,
+20485,
+25605,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+30720,
+31743,
+30719,
+29695,
+28671,
+27647,
+26623,
+25599,
+24575,
+23551,
+22527,
+21503,
+20479,
+19455,
+18431,
+17407,
+16383,
+15359,
+14335,
+13311,
+12287,
+11263,
+10239,
+9215,
+8191,
+7167,
+6143,
+5119,
+4095,
+3071,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024,
+1024
diff --git a/drivers/media/video/isp/noise_filter_table.h b/drivers/media/video/isp/noise_filter_table.h
new file mode 100644
index 0000000..4b4c085
--- /dev/null
+++ b/drivers/media/video/isp/noise_filter_table.h
@@ -0,0 +1,90 @@
+/*
+ * noise_filter_table.h
+ *
+ * TI OMAP3 ISP - Noise filter table
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+16,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31,
+31
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index c0db7f4..f65f612 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -272,6 +272,7 @@ header-y += nfsacl.h
 header-y += nl80211.h
 header-y += nubus.h
 header-y += nvram.h
+header-y += omap3isp.h
 header-y += omapfb.h
 header-y += oom.h
 header-y += param.h
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
new file mode 100644
index 0000000..ab249b2
--- /dev/null
+++ b/include/linux/omap3isp.h
@@ -0,0 +1,631 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - User-space API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_USER_H
+#define OMAP3_ISP_USER_H
+
+#include <linux/types.h>
+
+/* Private IOCTLs */
+
+#define VIDIOC_OMAP3ISP_CCDC_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
+#define VIDIOC_OMAP3ISP_PRV_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
+#define VIDIOC_OMAP3ISP_AEWB_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
+#define VIDIOC_OMAP3ISP_HIST_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
+#define VIDIOC_OMAP3ISP_AF_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
+#define VIDIOC_OMAP3ISP_STAT_REQ \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
+#define VIDIOC_OMAP3ISP_STAT_EN \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
+
+/* Events */
+
+#define V4L2_EVENT_OMAP3ISP_CLASS	(V4L2_EVENT_PRIVATE_START | 0x100)
+#define V4L2_EVENT_OMAP3ISP_AEWB	(V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
+#define V4L2_EVENT_OMAP3ISP_AF		(V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
+#define V4L2_EVENT_OMAP3ISP_HIST	(V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
+#define V4L2_EVENT_OMAP3ISP_HS_VS	(V4L2_EVENT_OMAP3ISP_CLASS | 0x4)
+
+struct omap3isp_stat_event_status {
+	__u32 frame_number;
+	__u16 config_counter;
+	__u8 buf_err;
+};
+
+/* AE/AWB related structures and flags*/
+
+/* H3A Range Constants */
+#define OMAP3ISP_AEWB_MAX_SATURATION_LIM	1023
+#define OMAP3ISP_AEWB_MIN_WIN_H			2
+#define OMAP3ISP_AEWB_MAX_WIN_H			256
+#define OMAP3ISP_AEWB_MIN_WIN_W			6
+#define OMAP3ISP_AEWB_MAX_WIN_W			256
+#define OMAP3ISP_AEWB_MIN_WINVC			1
+#define OMAP3ISP_AEWB_MIN_WINHC			1
+#define OMAP3ISP_AEWB_MAX_WINVC			128
+#define OMAP3ISP_AEWB_MAX_WINHC			36
+#define OMAP3ISP_AEWB_MAX_WINSTART		4095
+#define OMAP3ISP_AEWB_MIN_SUB_INC		2
+#define OMAP3ISP_AEWB_MAX_SUB_INC		32
+#define OMAP3ISP_AEWB_MAX_BUF_SIZE		83600
+
+#define OMAP3ISP_AF_IIRSH_MIN			0
+#define OMAP3ISP_AF_IIRSH_MAX			4095
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX	36
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX	128
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN		2
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX		32
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN		2
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX		256
+#define OMAP3ISP_AF_PAXEL_WIDTH_MIN		16
+#define OMAP3ISP_AF_PAXEL_WIDTH_MAX		256
+#define OMAP3ISP_AF_PAXEL_HZSTART_MIN		1
+#define OMAP3ISP_AF_PAXEL_HZSTART_MAX		4095
+#define OMAP3ISP_AF_PAXEL_VTSTART_MIN		0
+#define OMAP3ISP_AF_PAXEL_VTSTART_MAX		4095
+#define OMAP3ISP_AF_THRESHOLD_MAX		255
+#define OMAP3ISP_AF_COEF_MAX			4095
+#define OMAP3ISP_AF_PAXEL_SIZE			48
+#define OMAP3ISP_AF_MAX_BUF_SIZE		221184
+
+/**
+ * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
+ * saturation_limit: Saturation limit.
+ * @win_height: Window Height. Range 2 - 256, even values only.
+ * @win_width: Window Width. Range 6 - 256, even values only.
+ * @ver_win_count: Vertical Window Count. Range 1 - 128.
+ * @hor_win_count: Horizontal Window Count. Range 1 - 36.
+ * @ver_win_start: Vertical Window Start. Range 0 - 4095.
+ * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
+ * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
+ * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
+ * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
+ *                     values only.
+ * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
+ *                     values only.
+ * @alaw_enable: AEW ALAW EN flag.
+ * @aewb_enable: AE AWB stats generation EN flag.
+ */
+struct omap3isp_h3a_aewb_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	/* Private fields */
+	__u16 saturation_limit;
+	__u16 win_height;
+	__u16 win_width;
+	__u16 ver_win_count;
+	__u16 hor_win_count;
+	__u16 ver_win_start;
+	__u16 hor_win_start;
+	__u16 blk_ver_win_start;
+	__u16 blk_win_height;
+	__u16 subsample_ver_inc;
+	__u16 subsample_hor_inc;
+	__u8 alaw_enable;
+};
+
+/**
+ * struct omap3isp_stat_data - Statistic data sent to or received from user
+ * @buf: Pointer to pass to user.
+ * @frame_number: Frame number of requested stats.
+ * @cur_frame: Current frame number being processed.
+ * @buf_size: Buffer size requested and returned.
+ * @ts: Timestamp of returned framestats.
+ */
+struct omap3isp_stat_data {
+	struct timeval ts;
+	void __user *buf;
+	__u32 buf_size;
+	__u16 frame_number;
+	__u16 cur_frame;
+	__u16 config_counter;
+	__u16 new_bufs;		/* Deprecated */
+};
+
+
+/* Histogram related structs */
+
+/* Flags for number of bins */
+#define OMAP3ISP_HIST_BINS_32		0
+#define OMAP3ISP_HIST_BINS_64		1
+#define OMAP3ISP_HIST_BINS_128		2
+#define OMAP3ISP_HIST_BINS_256		3
+
+/* Number of bins * 4 colors * 4-bytes word */
+#define OMAP3ISP_HIST_MEM_SIZE_BINS(n)	((1 << ((n)+5))*4*4)
+
+#define OMAP3ISP_HIST_MEM_SIZE		1024
+#define OMAP3ISP_HIST_MIN_REGIONS	1
+#define OMAP3ISP_HIST_MAX_REGIONS	4
+#define OMAP3ISP_HIST_MAX_WB_GAIN	255
+#define OMAP3ISP_HIST_MIN_WB_GAIN	0
+#define OMAP3ISP_HIST_MAX_BIT_WIDTH	14
+#define OMAP3ISP_HIST_MIN_BIT_WIDTH	8
+#define OMAP3ISP_HIST_MAX_WG		4
+#define OMAP3ISP_HIST_MAX_BUF_SIZE	4096
+
+/* Source */
+#define OMAP3ISP_HIST_SOURCE_CCDC	0
+#define OMAP3ISP_HIST_SOURCE_MEM	1
+
+/* CFA pattern */
+#define OMAP3ISP_HIST_CFA_BAYER		0
+#define OMAP3ISP_HIST_CFA_FOVEONX3	1
+
+struct omap3isp_hist_region {
+	__u16 h_start;
+	__u16 h_end;
+	__u16 v_start;
+	__u16 v_end;
+};
+
+struct omap3isp_hist_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	__u8 num_acc_frames;	/* Num of image frames to be processed and
+				   accumulated for each histogram frame */
+	__u16 hist_bins;	/* number of bins: 32, 64, 128, or 256 */
+	__u8 cfa;		/* BAYER or FOVEON X3 */
+	__u8 wg[OMAP3ISP_HIST_MAX_WG];	/* White Balance Gain */
+	__u8 num_regions;	/* number of regions to be configured */
+	struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
+};
+
+/* Auto Focus related structs */
+
+#define OMAP3ISP_AF_NUM_COEF		11
+
+enum omap3isp_h3a_af_fvmode {
+	OMAP3ISP_AF_MODE_SUMMED = 0,
+	OMAP3ISP_AF_MODE_PEAK = 1
+};
+
+/* Red, Green, and blue pixel location in the AF windows */
+enum omap3isp_h3a_af_rgbpos {
+	OMAP3ISP_AF_GR_GB_BAYER = 0,	/* GR and GB as Bayer pattern */
+	OMAP3ISP_AF_RG_GB_BAYER = 1,	/* RG and GB as Bayer pattern */
+	OMAP3ISP_AF_GR_BG_BAYER = 2,	/* GR and BG as Bayer pattern */
+	OMAP3ISP_AF_RG_BG_BAYER = 3,	/* RG and BG as Bayer pattern */
+	OMAP3ISP_AF_GG_RB_CUSTOM = 4,	/* GG and RB as custom pattern */
+	OMAP3ISP_AF_RB_GG_CUSTOM = 5	/* RB and GG as custom pattern */
+};
+
+/* Contains the information regarding the Horizontal Median Filter */
+struct omap3isp_h3a_af_hmf {
+	__u8 enable;	/* Status of Horizontal Median Filter */
+	__u8 threshold;	/* Threshhold Value for Horizontal Median Filter */
+};
+
+/* Contains the information regarding the IIR Filters */
+struct omap3isp_h3a_af_iir {
+	__u16 h_start;			/* IIR horizontal start */
+	__u16 coeff_set0[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 0 */
+	__u16 coeff_set1[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 1 */
+};
+
+/* Contains the information regarding the Paxels Structure in AF Engine */
+struct omap3isp_h3a_af_paxel {
+	__u16 h_start;	/* Horizontal Start Position */
+	__u16 v_start;	/* Vertical Start Position */
+	__u8 width;	/* Width of the Paxel */
+	__u8 height;	/* Height of the Paxel */
+	__u8 h_cnt;	/* Horizontal Count */
+	__u8 v_cnt;	/* vertical Count */
+	__u8 line_inc;	/* Line Increment */
+};
+
+/* Contains the parameters required for hardware set up of AF Engine */
+struct omap3isp_h3a_af_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	struct omap3isp_h3a_af_hmf hmf;		/* HMF configurations */
+	struct omap3isp_h3a_af_iir iir;		/* IIR filter configurations */
+	struct omap3isp_h3a_af_paxel paxel;	/* Paxel parameters */
+	enum omap3isp_h3a_af_rgbpos rgb_pos;	/* RGB Positions */
+	enum omap3isp_h3a_af_fvmode fvmode;	/* Accumulator mode */
+	__u8 alaw_enable;			/* AF ALAW status */
+};
+
+/* ISP CCDC structs */
+
+/* Abstraction layer CCDC configurations */
+#define OMAP3ISP_CCDC_ALAW		(1 << 0)
+#define OMAP3ISP_CCDC_LPF		(1 << 1)
+#define OMAP3ISP_CCDC_BLCLAMP		(1 << 2)
+#define OMAP3ISP_CCDC_BCOMP		(1 << 3)
+#define OMAP3ISP_CCDC_FPC		(1 << 4)
+#define OMAP3ISP_CCDC_CULL		(1 << 5)
+#define OMAP3ISP_CCDC_CONFIG_LSC	(1 << 7)
+#define OMAP3ISP_CCDC_TBL_LSC		(1 << 8)
+
+#define OMAP3ISP_RGB_MAX		3
+
+/* Enumeration constants for Alaw input width */
+enum omap3isp_alaw_ipwidth {
+	OMAP3ISP_ALAW_BIT12_3 = 0x3,
+	OMAP3ISP_ALAW_BIT11_2 = 0x4,
+	OMAP3ISP_ALAW_BIT10_1 = 0x5,
+	OMAP3ISP_ALAW_BIT9_0 = 0x6
+};
+
+/**
+ * struct omap3isp_ccdc_lsc_config - LSC configuration
+ * @offset: Table Offset of the gain table.
+ * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
+ * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
+ * @gain_format: Gain table format.
+ * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
+ * @fmtlnh: Number of pixels in horizontal direction to use for the data
+ *          reformatter.
+ * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
+ * @fmtlnv: Number of lines in vertical direction for the data reformatter.
+ * @initial_x: X position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @initial_y: Y position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @size: Size of LSC gain table. Filled when loaded from userspace.
+ */
+struct omap3isp_ccdc_lsc_config {
+	__u16 offset;
+	__u8 gain_mode_n;
+	__u8 gain_mode_m;
+	__u8 gain_format;
+	__u16 fmtsph;
+	__u16 fmtlnh;
+	__u16 fmtslv;
+	__u16 fmtlnv;
+	__u8 initial_x;
+	__u8 initial_y;
+	__u32 size;
+};
+
+/**
+ * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
+ * @obgain: Optical black average gain.
+ * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
+ * @oblines: Optical Black Sample lines.
+ * @oblen: Optical Black Sample Length.
+ * @dcsubval: Digital Black Clamp subtract value.
+ */
+struct omap3isp_ccdc_bclamp {
+	__u8 obgain;
+	__u8 obstpixel;
+	__u8 oblines;
+	__u8 oblen;
+	__u16 dcsubval;
+};
+
+/**
+ * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
+ * @fpnum: Number of faulty pixels to be corrected in the frame.
+ * @fpcaddr: Memory address of the FPC Table
+ */
+struct omap3isp_ccdc_fpc {
+	__u16 fpnum;
+	__u32 fpcaddr;
+};
+
+/**
+ * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
+ * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
+ * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
+ * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
+ * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
+ */
+struct omap3isp_ccdc_blcomp {
+	__u8 b_mg;
+	__u8 gb_g;
+	__u8 gr_cy;
+	__u8 r_ye;
+};
+
+/**
+ * omap3isp_ccdc_culling - Culling parameters
+ * @v_pattern: Vertical culling pattern.
+ * @h_odd: Horizontal Culling pattern for odd lines.
+ * @h_even: Horizontal Culling pattern for even lines.
+ */
+struct omap3isp_ccdc_culling {
+	__u8 v_pattern;
+	__u16 h_odd;
+	__u16 h_even;
+};
+
+/**
+ * omap3isp_ccdc_update_config - CCDC configuration
+ * @update: Specifies which CCDC registers should be updated.
+ * @flag: Specifies which CCDC functions should be enabled.
+ * @alawip: Enable/Disable A-Law compression.
+ * @bclamp: Black clamp control register.
+ * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
+ * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
+ * @cull: Cull control register.
+ * @lsc: Pointer to LSC gain table.
+ */
+struct omap3isp_ccdc_update_config {
+	__u16 update;
+	__u16 flag;
+	enum omap3isp_alaw_ipwidth alawip;
+	struct omap3isp_ccdc_bclamp __user *bclamp;
+	struct omap3isp_ccdc_blcomp __user *blcomp;
+	struct omap3isp_ccdc_fpc __user *fpc;
+	struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
+	struct omap3isp_ccdc_culling __user *cull;
+	__u8 __user *lsc;
+};
+
+/* Preview configurations */
+#define OMAP3ISP_PREV_LUMAENH		(1 << 0)
+#define OMAP3ISP_PREV_INVALAW		(1 << 1)
+#define OMAP3ISP_PREV_HRZ_MED		(1 << 2)
+#define OMAP3ISP_PREV_CFA		(1 << 3)
+#define OMAP3ISP_PREV_CHROMA_SUPP	(1 << 4)
+#define OMAP3ISP_PREV_WB		(1 << 5)
+#define OMAP3ISP_PREV_BLKADJ		(1 << 6)
+#define OMAP3ISP_PREV_RGB2RGB		(1 << 7)
+#define OMAP3ISP_PREV_COLOR_CONV	(1 << 8)
+#define OMAP3ISP_PREV_YC_LIMIT		(1 << 9)
+#define OMAP3ISP_PREV_DEFECT_COR	(1 << 10)
+#define OMAP3ISP_PREV_GAMMABYPASS	(1 << 11)
+#define OMAP3ISP_PREV_DRK_FRM_CAPTURE	(1 << 12)
+#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT	(1 << 13)
+#define OMAP3ISP_PREV_LENS_SHADING	(1 << 14)
+#define OMAP3ISP_PREV_NF		(1 << 15)
+#define OMAP3ISP_PREV_GAMMA		(1 << 16)
+
+#define OMAP3ISP_PREV_NF_TBL_SIZE	64
+#define OMAP3ISP_PREV_CFA_TBL_SIZE	576
+#define OMAP3ISP_PREV_GAMMA_TBL_SIZE	1024
+#define OMAP3ISP_PREV_YENH_TBL_SIZE	128
+
+#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS	4
+
+/**
+ * struct omap3isp_prev_hmed - Horizontal Median Filter
+ * @odddist: Distance between consecutive pixels of same color in the odd line.
+ * @evendist: Distance between consecutive pixels of same color in the even
+ *            line.
+ * @thres: Horizontal median filter threshold.
+ */
+struct omap3isp_prev_hmed {
+	__u8 odddist;
+	__u8 evendist;
+	__u8 thres;
+};
+
+/*
+ * Enumeration for CFA Formats supported by preview
+ */
+enum omap3isp_cfa_fmt {
+	OMAP3ISP_CFAFMT_BAYER,
+	OMAP3ISP_CFAFMT_SONYVGA,
+	OMAP3ISP_CFAFMT_RGBFOVEON,
+	OMAP3ISP_CFAFMT_DNSPL,
+	OMAP3ISP_CFAFMT_HONEYCOMB,
+	OMAP3ISP_CFAFMT_RRGGBBFOVEON
+};
+
+/**
+ * struct omap3isp_prev_cfa - CFA Interpolation
+ * @format: CFA Format Enum value supported by preview.
+ * @gradthrs_vert: CFA Gradient Threshold - Vertical.
+ * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
+ * @table: Pointer to the CFA table.
+ */
+struct omap3isp_prev_cfa {
+	enum omap3isp_cfa_fmt format;
+	__u8 gradthrs_vert;
+	__u8 gradthrs_horz;
+	__u32 table[OMAP3ISP_PREV_CFA_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_csup - Chrominance Suppression
+ * @gain: Gain.
+ * @thres: Threshold.
+ * @hypf_en: Flag to enable/disable the High Pass Filter.
+ */
+struct omap3isp_prev_csup {
+	__u8 gain;
+	__u8 thres;
+	__u8 hypf_en;
+};
+
+/**
+ * struct omap3isp_prev_wbal - White Balance
+ * @dgain: Digital gain (U10Q8).
+ * @coef3: White balance gain - COEF 3 (U8Q5).
+ * @coef2: White balance gain - COEF 2 (U8Q5).
+ * @coef1: White balance gain - COEF 1 (U8Q5).
+ * @coef0: White balance gain - COEF 0 (U8Q5).
+ */
+struct omap3isp_prev_wbal {
+	__u16 dgain;
+	__u8 coef3;
+	__u8 coef2;
+	__u8 coef1;
+	__u8 coef0;
+};
+
+/**
+ * struct omap3isp_prev_blkadj - Black Level Adjustment
+ * @red: Black level offset adjustment for Red in 2's complement format
+ * @green: Black level offset adjustment for Green in 2's complement format
+ * @blue: Black level offset adjustment for Blue in 2's complement format
+ */
+struct omap3isp_prev_blkadj {
+	/*Black level offset adjustment for Red in 2's complement format */
+	__u8 red;
+	/*Black level offset adjustment for Green in 2's complement format */
+	__u8 green;
+	/* Black level offset adjustment for Blue in 2's complement format */
+	__u8 blue;
+};
+
+/**
+ * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
+ * @matrix: Blending values(S12Q8 format)
+ *              [RR] [GR] [BR]
+ *              [RG] [GG] [BG]
+ *              [RB] [GB] [BB]
+ * @offset: Blending offset value for R,G,B in 2's complement integer format.
+ */
+struct omap3isp_prev_rgbtorgb {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__u16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
+ * @matrix: Color space conversion coefficients(S10Q8)
+ *              [CSCRY]  [CSCGY]  [CSCBY]
+ *              [CSCRCB] [CSCGCB] [CSCBCB]
+ *              [CSCRCR] [CSCGCR] [CSCBCR]
+ * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
+ */
+struct omap3isp_prev_csc {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__s16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_yclimit - Y, C Value Limit
+ * @minC: Minimum C value
+ * @maxC: Maximum C value
+ * @minY: Minimum Y value
+ * @maxY: Maximum Y value
+ */
+struct omap3isp_prev_yclimit {
+	__u8 minC;
+	__u8 maxC;
+	__u8 minY;
+	__u8 maxY;
+};
+
+/**
+ * struct omap3isp_prev_dcor - Defect correction
+ * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
+ * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
+ */
+struct omap3isp_prev_dcor {
+	__u8 couplet_mode_en;
+	__u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
+};
+
+/**
+ * struct omap3isp_prev_nf - Noise Filter
+ * @spread: Spread value to be used in Noise Filter
+ * @table: Pointer to the Noise Filter table
+ */
+struct omap3isp_prev_nf {
+	__u8 spread;
+	__u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_gtables - Gamma correction tables
+ * @red: Array for red gamma table.
+ * @green: Array for green gamma table.
+ * @blue: Array for blue gamma table.
+ */
+struct omap3isp_prev_gtables {
+	__u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_luma - Luma enhancement
+ * @table: Array for luma enhancement table.
+ */
+struct omap3isp_prev_luma {
+	__u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_update_config - Preview engine configuration (user)
+ * @update: Specifies which ISP Preview registers should be updated.
+ * @flag: Specifies which ISP Preview functions should be enabled.
+ * @shading_shift: 3bit value of shift used in shading compensation.
+ * @luma: Pointer to luma enhancement structure.
+ * @hmed: Pointer to structure containing the odd and even distance.
+ *        between the pixels in the image along with the filter threshold.
+ * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
+ *       format in the image, vertical and horizontal gradient threshold.
+ * @csup: Pointer to Structure for Chrominance Suppression coefficients.
+ * @wbal: Pointer to structure for White Balance.
+ * @blkadj: Pointer to structure for Black Adjustment.
+ * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
+ * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
+ * @yclimit: Pointer to structure for Y, C Value Limit.
+ * @dcor: Pointer to structure for defect correction.
+ * @nf: Pointer to structure for Noise Filter
+ * @gamma: Pointer to gamma structure.
+ */
+struct omap3isp_prev_update_config {
+	__u32 update;
+	__u32 flag;
+	__u32 shading_shift;
+	struct omap3isp_prev_luma __user *luma;
+	struct omap3isp_prev_hmed __user *hmed;
+	struct omap3isp_prev_cfa __user *cfa;
+	struct omap3isp_prev_csup __user *csup;
+	struct omap3isp_prev_wbal __user *wbal;
+	struct omap3isp_prev_blkadj __user *blkadj;
+	struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
+	struct omap3isp_prev_csc __user *csc;
+	struct omap3isp_prev_yclimit __user *yclimit;
+	struct omap3isp_prev_dcor __user *dcor;
+	struct omap3isp_prev_nf __user *nf;
+	struct omap3isp_prev_gtables __user *gamma;
+};
+
+#endif	/* OMAP3_ISP_USER_H */
-- 
1.6.6.1