1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
From 297f577635fe0182e596112c33b213fd22b4efa7 Mon Sep 17 00:00:00 2001
From: Steve Sakoman <steve@sakoman.com>
Date: Sun, 24 Jan 2010 09:33:56 -0800
Subject: [PATCH 25/45] ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
otherwise it is not executed on systems that use non-twl regulators
---
arch/arm/mach-omap2/mmc-twl4030.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 0c3c72d..dbdafb9 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -302,6 +302,14 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
if (c == NULL)
return -ENODEV;
+ if (mmc->slots[0].internal_clock) {
+ u32 reg;
+
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
+ }
+
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
*/
@@ -322,14 +330,6 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- /* only MMC2 supports a CLKIN */
- if (mmc->slots[0].internal_clock) {
- u32 reg;
-
- reg = omap_ctrl_readl(control_devconf1_offset);
- reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* enable interface voltage rail, if needed */
if (ret == 0 && c->vcc_aux) {
--
1.6.6.1
|
