1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
From 25ae9895ed107a6fe9d9c4345f21bbdaee4ccde6 Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@dominion.thruhere.net>
Date: Mon, 3 May 2010 14:41:29 +0200
Subject: [PATCH 07/45] ARM: OMAP: beagleboard: Add infrastructure to do fixups based on expansionboard name passed by u-boot
And add support for zippy2
---
arch/arm/mach-omap2/board-omap3beagle.c | 88 +++++++++++++++++++++++++++----
1 files changed, 78 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 429dacb..ac96551 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -75,6 +75,8 @@ static struct omap_opp * _omap37x_l3_rate_table = NULL;
#define NAND_BLOCK_SIZE SZ_128K
+char expansionboard_name[16];
+
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
#include <plat/mcspi.h>
@@ -87,7 +89,7 @@ static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
.single_channel = 1, /* 0: slave, 1: master */
};
-static struct spi_board_info omap3beagle_spi_board_info[] __initdata = {
+static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
{
.modalias = "enc28j60",
.bus_num = 4,
@@ -102,21 +104,62 @@ static void __init omap3beagle_enc28j60_init(void)
if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
(gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
- omap3beagle_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
- set_irq_type(omap3beagle_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
+ omap3beagle_zippy_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
+ set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
} else {
printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
return;
}
- spi_register_board_info(omap3beagle_spi_board_info,
- ARRAY_SIZE(omap3beagle_spi_board_info));
+ spi_register_board_info(omap3beagle_zippy_spi_board_info,
+ ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
}
#else
static inline void __init omap3beagle_enc28j60_init(void) { return; }
#endif
+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
+
+#include <plat/mcspi.h>
+#include <linux/spi/spi.h>
+
+#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157
+
+static struct omap2_mcspi_device_config ks8851_spi_chip_info = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = {
+ {
+ .modalias = "ks8851",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 36000000,
+ .controller_data = &ks8851_spi_chip_info,
+ },
+};
+
+static void __init omap3beagle_ks8851_init(void)
+{
+ if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) &&
+ (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) {
+ gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0);
+ omap3beagle_zippy2_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ);
+ set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
+ } else {
+ printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
+ return;
+ }
+
+ spi_register_board_info(omap3beagle_zippy2_spi_board_info,
+ ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
+}
+
+#else
+static inline void __init omap3beagle_ks8851_init(void) { return; }
+#endif
static struct mtd_partition omap3beagle_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
@@ -281,8 +324,6 @@ static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 2,
.wires = 4,
- .gpio_wp = 141,
- .gpio_cd = 162,
.transceiver = true,
.ocr_mask = 0x00100000, /* 3.3V */
},
@@ -601,7 +642,7 @@ static void __init omap3beagle_flash_init(void)
}
}
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -621,6 +662,15 @@ static struct omap_board_mux board_mux[] __initdata = {
#define board_mux NULL
#endif
+static int __init expansionboard_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+ strncpy(expansionboard_name, str, 16);
+ printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name);
+ return 0;
+}
+
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -634,8 +684,24 @@ static void __init omap3_beagle_init(void)
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
- omap3beagle_enc28j60_init();
-
+ if(!strcmp(expansionboard_name, "zippy"))
+ {
+ printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
+ omap3beagle_enc28j60_init();
+ printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
+ mmc[1].gpio_wp = 141;
+ mmc[1].gpio_cd = 162;
+ }
+
+ if(!strcmp(expansionboard_name, "zippy2"))
+ {
+ printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
+ omap3beagle_ks8851_init();
+ printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
+ mmc[1].gpio_wp = 141;
+ mmc[1].gpio_cd = 162;
+ }
+
usb_musb_init();
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
@@ -652,6 +718,8 @@ static void __init omap3_beagle_map_io(void)
omap2_map_common_io();
}
+early_param("buddy", expansionboard_setup);
+
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
.phys_io = 0x48000000,
--
1.6.6.1
|
