1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
From 2adb339e4988632379971febe5696f21d05c71f2 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Tue, 19 Jul 2011 01:52:14 -0700
Subject: [PATCH] usb: musb: Enable DMA mode1 RX for USB-Mass-Storage
This patch enables the DMA mode1 RX support.
This feature is enabled based on the short_not_ok flag passed from
gadget drivers.
This will result in a thruput performance gain of around
40% for USB mass-storage/mtp use cases.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Tested-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
drivers/usb/musb/musb_gadget.c | 68 ++++++++++++++++++++++++---------------
1 files changed, 42 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f47c201..ca32c63 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -630,6 +630,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
u16 len;
u16 csr = musb_readw(epio, MUSB_RXCSR);
struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+ u8 use_mode_1;
if (hw_ep->is_shared_fifo)
musb_ep = &hw_ep->ep_in;
@@ -679,6 +680,18 @@ static void rxstate(struct musb *musb, struct musb_request *req)
if (csr & MUSB_RXCSR_RXPKTRDY) {
len = musb_readw(epio, MUSB_RXCOUNT);
+
+ /*
+ * Enable Mode 1 for RX transfers only for mass-storage
+ * use-case, based on short_not_ok flag which is set only
+ * from file_storage and f_mass_storage drivers
+ */
+
+ if (request->short_not_ok && len == musb_ep->packet_sz)
+ use_mode_1 = 1;
+ else
+ use_mode_1 = 0;
+
if (request->actual < request->length) {
#ifdef CONFIG_USB_INVENTRA_DMA
if (is_buffer_mapped(req)) {
@@ -710,37 +723,40 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* then becomes usable as a runtime "use mode 1" hint...
*/
- csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
- csr |= MUSB_RXCSR_AUTOCLEAR;
- /* csr |= MUSB_RXCSR_DMAMODE; */
-
- /* this special sequence (enabling and then
- * disabling MUSB_RXCSR_DMAMODE) is required
- * to get DMAReq to activate
- */
- musb_writew(epio, MUSB_RXCSR,
- csr | MUSB_RXCSR_DMAMODE);
-#else
- if (!musb_ep->hb_mult &&
- musb_ep->hw_ep->rx_double_buffered)
+ /* Experimental: Mode1 works with mass storage use cases */
+ if (use_mode_1) {
csr |= MUSB_RXCSR_AUTOCLEAR;
-#endif
- musb_writew(epio, MUSB_RXCSR, csr);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ /* this special sequence (enabling and then
+ * disabling MUSB_RXCSR_DMAMODE) is required
+ * to get DMAReq to activate
+ */
+ musb_writew(epio, MUSB_RXCSR,
+ csr | MUSB_RXCSR_DMAMODE);
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ } else {
+ if (!musb_ep->hb_mult &&
+ musb_ep->hw_ep->rx_double_buffered)
+ csr |= MUSB_RXCSR_AUTOCLEAR;
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
if (request->actual < request->length) {
int transfer_size = 0;
-#ifdef USE_MODE1
- transfer_size = min(request->length - request->actual,
- channel->max_len);
-#else
- transfer_size = min(request->length - request->actual,
- (unsigned)len);
-#endif
- if (transfer_size <= musb_ep->packet_sz)
- musb_ep->dma->desired_mode = 0;
- else
+ if (use_mode_1) {
+ transfer_size = min(request->length - request->actual,
+ channel->max_len);
musb_ep->dma->desired_mode = 1;
+ } else {
+ transfer_size = min(request->length - request->actual,
+ (unsigned)len);
+ musb_ep->dma->desired_mode = 0;
+ }
use_dma = c->channel_program(
channel,
--
1.6.6.1
|
