Age | Commit message (Collapse) | Author |
|
The patch was dropped with 3.17 update:
https://git.yoctoproject.org/meta-ti/commit/?h=dunfell&id=f8182afdcfe427865707077d353359827f1ff6bf
But the patch is still needed for internal OE-built toolchain to pass
sysroot, otherwise libgcc.a cannot be found:
| aarch64-oe-linux-ld.bfd: cannot find libgcc.a: No such file or directory
The older version from meta-arm/dunfell no longer applies, so copy a newer
version of the patch locally.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
main-r5f0_0-fw was pointing to pdk-ipc binary, while it should be
pointing to ethfw one for j784s4-evm, j784s4-hs-evm
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
GIT_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports
RGMII mode.
Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
Add-On Ethernet Card.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the MCSPI loopback overlay file for J784S4 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the MCSPI loopback overlay file for J721S2 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the MCSPI loopback overlay file for J721E EVM which helps
users to enable MCU-MAIN MCSPI loopback applications, even though
the overlay is named j7200-mcspi-loopback.dtbo, same can be used
for testing on other J7 platforms as well.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J784S4 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721S2 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J721E SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add device tree overlay for extending support for mcu_uart0 as well as
wkup_uart0 for boards with J7200 SoC. This overlay will mainly be used
for the purpose of testing uart instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
This reverts commit 7f773f3b5bef5ec20c1a0b43a5b9eeaf3eb00702.
An error in our CICD script picked an invalid hash. Rollback to the
previous SRCREV.
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
GIT_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
The SHA for optee_os had been of 3.20-rc1 tag instead of 3.20 tag which
had been marked stable. Change the tag to 3.20.
Fixes: 280e7b4b3a17 ("optee: update optee components to 3.20 tag")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
PV
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
PV
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Add the following overlay files on J784S4 EVM:
1. Fusion board (For FPDLink-III cameras)
2. OV5640 camera module
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the following overlay files on J721S2 EVM:
1. Fusion board (For FPDLink-III cameras)
2. OV5640 camera module
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the following overlay files on J721E EVM:
1. Fusion board (For FPDLink-III cameras)
2. IMX390 FPDLink camera module
3. IMX219 RPi-compatible camera module
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the MCSPI loopback overlay file for J7200 EVM which helps
users to enable MCU-MAIN MCSPI loopback applications.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
The AM69 SK has PWM output pins connected to its RPi header. Add
overlay file to enable PWM pins.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the basic J784S4 HS-FS configuration.
* Add configurations to support both HS-FS and GP keeping GP as default.
* Add ti-sci-firmware overrides for HS-FS.
* Remove evm conf file inclusion in hs-evm conf.
* Add j784s4 hs-evm specific config to hs-evm conf.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Lets add the basic AM62A configuration
- Add machine conf for AM62A.
- The wic images will boot on AM62A HS-FS devices by default. The sysfw image for GP and HS-SE will be packaged in the wic image as tiboot3-am62ax-gp-evm.bin and tiboot3-am62ax-hs-evm.bin respectively.
- Add ti-sci-firmware overrides.
- Sign ATF, OPTEE and RTOS Firmware.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|