Age | Commit message (Collapse) | Author |
|
The conversion was mostly automated with:
./scripts/contrib/convert-overrides.py
With a few manual tweaks.
Also change LAYERCOMPAT to honister.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
The SERIAL_CONSOLES var is used inside systemd-serialgetty.bb to
generate systemd unit to get console after boot, this fix no console in
DB845c.
Changes,
Remove SERIAL_CONSOLES set in sdx55-mtp.conf since is the default one.
Add override in sdx55-telit-fn980 to set serial console.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Stop installing lt9611uxc-upgrade package, it was found to be confusing
to users. It will be replaced by the notice in the release notes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
To install qca/nvm_00440302.bin required for bluetooth.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
meta-qcom depends only oe-core, mark it explicitely. The layer has
additional dependencies on meta-oe or meta-networking, but they are
optional.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
qrb5165-rb5: use new rootfs partition
|
|
Since RB5 switched to /dev/sda1 as rootfs, drop separate overrides for QCOM_BOOTIMG_ROOTFS.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Latest RB5 bootloader package provides updated partition scheme. It
removes Android partitions and adds single rootfs partition at
/dev/sda1. Switch to new rootfs partition.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Initial machine support for SDX55
|
|
Automatically update LT9611UXC firmware
|
|
Add lt9611uxc-upgrade recipe to autoupdate DSI-to-HDMI bridge firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Define kernel/machine parameters specific to each device tree blob.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Newer Qualcomm machines default to QCOM_BOOTIMG_PAGE_SIZE being 4096.
Change default from 2048 to 4096 and update machine config files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move machine-specific KERNEL_CMDLINE append to machine (db845c) config
file. Include file should not contain machine-specific settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This new MACHINE is target to build multiple Android boot images
(boards) and use a common rootfs/userspace filesystem.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
[DB: Add RB5 support]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
rb5 dvt slightly differs from the production board, so support both DVT
and PVT device trees.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
SDX55 Telit FN980 based on SDX55 chipset which uses ubi filesystem for rootfs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
SDX55-MTP based on SDX55 chipset which uses ubi filesystem for rootfs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Select android-tools-conf-configfs as PREFERRED_PROVIDER for
android-tools-conf, so that adbd startup scripts will use it for device
configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The ath11k driver fails to start the device properly if regdb can not be
loaded. Add wireless-regdb-static to MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS
if wifi is enabled in DISTRO_FEATURES to make sure all images are able
to bootstrap the onboard QCA6390 (ath11k) device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Install linux-firmware-ath11k package if DISTRO_FEATURES contains wifi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
RB5 developers have changed partitioning scheme somewhere in the middle
of development cycle. Earlier firmware puts userdata partition at
/dev/sda8, while later firmware puts it at /dev/sda6. In order to
properly support all firmware releases use PARTLABEL=userdata as rootfs
specifier on RB5.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In preparation to allowing rootfs specifications other than just a
device node, move '/dev/' prefix from linux-qcom-bootimg.inc to
individual machine config files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add 'qcom' to SOC_FAMILY variable to let recipes use generic 'qcom'
override. This makes adding support for newer machines/families error
prone, since we can enable all BSP patches/features for all families
without having to list them one by one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Now let's get it right. Userdata partition on RB5 is sda8, not sda6.
sda6 is system_a:
1 6 7 8.0 KiB A02C ssd
2 8 8199 32.0 MiB A026 persist
3 8200 8455 1024.0 KiB A01F misc
4 8456 8583 512.0 KiB A02D keystore
5 8584 8711 512.0 KiB FFFF frp
6 8712 8397319 32.0 GiB A038 system_a
7 8397320 16785927 32.0 GiB FFFF system_b
8 16785928 29595642 48.9 GiB A03A userdata
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
QRB5165 RB5 machine config lists sda15 as rootfs, which is C&P from
SM8250-MTP. Use sda6 as rootfs (which is proper userdata on RB5).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
firmware-qcom-rb5: package QRB5165 RB5 firmware files
|
|
Add firmware package to RRECOMMENDS so it is pulled if firmware files
are provided at the build time.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
A fix was add on mainline to support linux-firmware binary,
https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/commit/?h=release/qcomlt-5.7&id=21bb88052948b35bdce926f301f2ba7970040812
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
SM8250 SoC implements ARMv8.2-a with crypto extension, so switch default
tune to armv8-2a-crypto. Other supported extensions are not handled by
OE/Yocto (yet).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
SDM845 SoC implements ARMv8.2-a with crypto extension, so switch default
tune to armv8-2a-crypto. Other supported extensions are not handled by
OE/Yocto (yet).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add config file for Qcualcomm RB5 Robotics platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add configuration files for SM8250 SoC and SM8250-MTP board.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
adreno-a630}}
The bdwlan is needed to generate board-2.bin not useful alone, the same
for wlan parts that are now in linux-firmware-qcom-sdm845-modem.
Finally install a630_zap*.* firmware inside /lib/firmware/qcom the
remaining parts are now on linux-firmware-qcom-adreno-a630.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Some tools we have in initramfs-test-image are not in OE Core. So
instead split the list and use dynamic-layer to include them only when
their respective layers are also globally used.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
Remove installation in SDM845 machine too.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
This configuration recipe for wireless and bluetooth is deprecated now
remoteproc start is handled by rmtfs.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
This module changed name to qcom_q6v5_mss and the blacklist isn't
needed since 5.4 because rmtfs support start of the DSP.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
New bootloader comes with new partitions to store rmtfs firmware [1].
[1] https://git.linaro.org/landing-teams/working/qualcomm/db-boot-tools.git/commit/?id=04008fd6570b566041e6ded5df738068416607e3
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
EVB4K is a Qcom platform based on QCS404 based SOC. This patch adds basic support.
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
(cherry picked from commit 4104edfac56853022e6baddf8d4575691108f869)
(cherry picked from commit 6e47457290b5e5f755b3f6d6022037a2e31a7a3a)
|