AgeCommit message (Collapse)Author
2018-09-04kernel: append DTB to kernel imagesumo-testNicolas Dechesne
Instead of using dtbTool to create a DT image , and include it into the boot image, we append DTB to the compressed kernel image. the LK bootloader knows how to retrieve DTB , when they are appeneded to compressed kernel image. Note: * it only works with compressed image. * dtbToo also typically adds msm-ids into the DTB, recent versions of LK exist that allow a single DTB to be used without the msm-ids, in which case it will work fine. when using older LK version, it is needed to patch the kernel and include the msm-ids. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 4c4994c05053e73eac3622ab6f793db3eb8dbed3) (cherry picked from commit ae07326b0fc16237ade9d8447b96da445eb7bbf8)
2018-08-23bootrr: upgrade versionNicolas Dechesne
Amit Kucheria (1): db410c/db820c: Check thermal zone characteristics Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 5fb41dd1b4f831963cd6ce4713cd50fff9eebba4)
2018-08-01firmware: update firmware linksNicolas Dechesne
The content from builds.96boards.org was moved to releases.linaro.org, while there is some sort of redirection in place, it is better to use the new links from now on. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 660c13c516b525d2cfa83f33631ade06862b3db8)
2018-07-30layer.conf: include special treatment for meta-backportsNicolas Dechesne
meta-backports is a layer that contains various backport from existing OE layers, most of the time to bring newer version of recipes into an OE stable branch. Some meta-qcom users will also use meta-backports, some won't. This patch adds a bit of logic when setting BBFILES so that we can hold patches in meta-qcom that are parsed/used only when meta-backports is also used. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit f702785495b17d112afb6b6dbfbea4125a18a1ad)
2018-07-27bootrr: upgrade to latest commitNicolas Dechesne
This brings the following changes: Amit Kucheria (4): boards: sdm845: Add tsens test helpers: Add state_check helper helpers: Add value_in_range helper sdm845: Check thermal zone characteristics Bjorn Andersson (1): db820c: Drop duplicate ath10k and atl1c tests Nicolas Dechesne (3): helpers/*: do not assume /usr/bin/ bootrr: emulate lava-test-case command helpers/*: use '.' not 'source' Vinod Koul (4): boards: db820c: Test for prng boards: db410: Test for prng boards: msm8998: Fixup test for prng boards: sdm845: Fixup test for prng Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 8e8c27aa0e372a4cb9496825ff55d3863646edac)
2018-07-05linux-linaro-qcomlt_4.14: upgrade version to 4.14.53Nicolas Dechesne
The following changes were made: 5735c6d85885 Merge tag 'v4.14.53' into release/qcomlt-4.14 9682739ca33f clk: qcom: Drop gcc_aggre1_pnoc_ahb_clk clock 136733ffdf0b wcn36xx: drop unnecessary initialization of variables 0924a884abc1 wcn36xx: Fix WEP encryption ccb359e14b54 wcn36xx: Track associated stations 84d1b4e2456f wcn36xx: Fix WEP104 encryption type ac2f0667dab9 Merge tag 'v4.14.52' into release/qcomlt-4.14 8f5391ac8a06 Merge tag 'v4.14.50' into release/qcomlt-4.14 3f9a18deb8ff Merge tag 'v4.14.49' into release/qcomlt-4.14 4579f43d0d88 wcn36xx: Add support for Factory Test Mode (FTM) 10713132be52 wcn36xx: improve debug and error messages for SMD 1bb7ac0ce8ab wcn36xx: simplify wcn36xx_smd_open() be8a57113b62 wcn36xx: drain pending indicator messages on shutdown 58910146320b wcn36xx: set PREASSOC and IDLE stated when BSS info changes 8c881bc9d4e5 wcn36xx: consider CTRL_EOP bit when looking for valid descriptors 252d4af9f891 wcn36xx: only handle packets when ED or DONE bit is set 924b28380775 wcn36xx: clear all masks in RX interrupt 1d5cc5a5bcba wcn36xx: don't disable RX IRQ from handler 0f85f1eb024a wcn36xx: set DMA mask explicitly df8dc765bc0d wcn36xx: fix buffer commit logic on TX path 44ed17620b8e drm/msm: remove unbalanced mutex unlock c0db6b0f9301 wcn36xx: pass information elements in scan requests fdcc81376baf wcn36xx: send bss_type in scan requests 608933aa5513 wcn36xx: handle scan cancellation when firmware support is missing e2e0aefd3ffb wcn36xx: cancel pending scan request when interface goes down 7029fada8dba wcn36xx: abort scan request when 'dequeued' indicator is sent 10312bb59faf wcn36xx: pass correct BSS index when deleting BSS keys f55077b3a564 wcn36xx: use READ_ONCE() to access desc->ctrl c365faed904b wcn36xx: allocate skbs with GFP_KERNEL during init 8822a6c8d215 wcn36xx: Remove useless skb spinlock a69185955578 wcn36xx: Add missing fall through comment in smd.c 54fb449746f2 wcn36xx: don't delete invalid bss indices 1a9e18a5f507 wcn36xx: don't keep reference to skb if transmission failed 57ed51fa80e9 wcn36xx: check for DMA mapping errors in wcn36xx_dxe_tx_frame() 69cc029d3a15 kernel: configs: enable RPMSG char device d5a7a644760b rpmsg: added MODULE_ALIAS for rpmsg_char b00d4fbeab63 ASoC: qdsp6: q6adm: fix copp refcount 1df12036cb4a Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader 59f116876f1c arm64: dts: msm8996: Add modem remoteproc d7411f171597 rpmsg: qcom_smd: Access APCS through mailbox framework 9a108d744fda clk: qcom: Add some missing gcc clks for msm8996 c5f5bb0c6ab8 soc: qcom: rmtfs-mem: Add support for assigning memory to remote 9d92842808f7 arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-28conf: machine: *.conf: added overwrite options for all machinesThorben Vornholz
Adding overwriting options to certain variables to supply i.e. a different kernel version or another serial output without having extra files. This also allows setting these values via environment. Signed-off-by: Thorben Vornholz <thorben.vornholz@baslerweb.com> [nicolas.dechesne@linaro.org: extended initial PR to apply to all machines, not just 820c] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-28gpsd: add Qualcomm PDS driverNicolas Dechesne
While waiting for the driver to be merged upstream, we can carry it here in meta-qcom. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-25db820c: update default boot deviceNicolas Dechesne
The DB820c default GPT was updated such that the 'rootfs' partition is now expected to be /dev/sda1. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-06-01bootrr: Bump revisionBjorn Andersson
Bjorn Andersson (2): helpers: Allow timeout in assert_driver as well boards: db820c: Test for atl1c and ath10k_pci Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> (cherry picked from commit 20afcc54132243df0725fb058cc34699bf1e09d6)
2018-05-25bootr: upgrade revisionNicolas Dechesne
Nicolas Dechesne (2): boards: add tests for tsens for DB410c and DB820c boards: MTP8998: fix tsens device name Niklas Cassel (4): db820c: Rename pcie to pcie2, to match the schematics db820c: Add test for pcie0 db820c: Add test for WiFi db820c: Add test for Ethernet Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-05-23boot-init: Invoke bootrr scripts automaticallyBjorn Andersson
In a LAVA-less environment it's convenient to have the bootrr board scripts to be automatically invoked during boot. Allow this to happen by checking the kernel command line for the magic "bootrr-auto" and if so invoke the relevant board scripts. Finish with writing the tilde sentinel, to provide a signal to automation tools of when the tests are done executing. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> (cherry picked from commit 5840216bb1f8231c914c8356fac01b2b28ed1790)
2018-05-23bootrr-init: Run udevadm triggerBjorn Andersson
Any kernel modules referenced by the booting kernel will be waiting for userspace to become available, issue a udevadm trigger to go through sysfs and trigger the loading of kernel modules. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> (cherry picked from commit 4e9fd5d943fc2b328e6836a8ac69ef5d84283fc8)
2018-05-23bootrr: Bump bootrr to latest versionBjorn Andersson
ccc99d87f7c3 boards: Use timeout argument in apq8016 30e0c0fcd922 boards: Update boards list in makefile 5e4444068cc4 sdm845-mtp: Introduce initial test script 4f3565d881bd boards: msm8998: Add tests for everything currently in dt 577a9b8270fb boards: Add Sony Xperia Z2 Tablet test script 2ba0163958fa msm8998: Add test for boot-to-console msm8998 mtp Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> (cherry picked from commit 25da5c33d9d3a98d494ac6e04e50d0ce931214d1)
2018-04-20Revert "gpsd: add Qualcomm PDS driver"Nicolas Dechesne
Until gpsd 3.17 is available in meta-oe This reverts commit 5c9f60fb096e569b8e112fcb1479a9a9f530a659.
2018-04-20qrtr: include qrtr and rmtfs by defaultNicolas Dechesne
qrtr and rmtfs are very standard user space helpers when using Qualcomm Snapdragon processors. They are used to manage services running on remote cores, such as modem, DSP, ... While they are needed for GPS, they could be needed for other use cases, so let's add them by default from now on, insead of as a dependency of GPSd. While at it, at them for 8016 and 8096 targets. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20qdsp-config: remove recipeNicolas Dechesne
It is no longer expected to manually boot/reboot/stop remote cores, and we expect relevant cores to be brought up automatically. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20gpsd: add Qualcomm PDS driverNicolas Dechesne
While waiting for the driver to be merged upstream, we can carry it here in meta-qcom. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20qrtr: Bump qmic, qrtr and rmtfs to latest versionBjorn Andersson
A number of bug fixes and improvements have been added to qrtr and rmtfs, update these to the latest release. Update qmic as rmtfs depends on a later version. The qmic patch from Khem has been applied upstream. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20gps-proxy: remove recipeNicolas Dechesne
It is no longer needed, and we will be using a GPSd driver instead. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20linux-linaro-qcomlt: upgrade kernelNicolas Dechesne
79d8cc0c6a9e Merge remote-tracking branch 'todor/release/qcomlt-4.14-camera04' int 3ac514d9c3b7 arm64: msm8916: enable hexagon DSP 92027062885d qrtr: add MODULE_ALIAS_NETPROTO macro to qrtr eec8a369082f Disable blk_cgroup and blk_dev_throttling configs 884ac9993316 media: camss: Unify the clock names 626026eb7c9e arm64: dts: Remove unneeded "cci_lines" parent node c2eac8b9ad93 camss: vfe: Add second VFE support 5d4dbe0a93bf Make vfe1 power domain a parent of vfe0 e41808b0fa0a camss: vfe: Get line pointer as container of video_out fa30d5151ae2 camss: vfe: Fix to_vfe() macro member name 32909f892760 camss: Add support for RAW MIPI14 on 8x96 fe18b26af061 doc-rst: Add packed Bayer raw14 pixel formats 0e88b90fe534 camss: csid: MIPI10 to Plain16 format conversion c61bfd29ac3f camss: vfe: Add support for UYVY output from VFE on 8x96 d97babdfc210 camss: vfe: Different format support on source pad aab7d4b3fb31 camss: csid: Different format support on source pad e35143c940ef camss: Format configuration per hardware version 1b59524dd14a camss: csid: Configure data type and decode format properly 4f61662f2c93 camss: vfe: Add 8x96 PIX interface support eff35d7db06f camss: vfe: Move interrupt handling to the hw specific files e845bb36918e camss: vfe: Do not disable CAMIF when clearing its status 160d4729ed79 media: ov5645: Improve mode finding function e1ce4f5a5fcd media: ov5645: Fix write_reg return code 6864a050edfc arm64: dts: msm8996: OV7251 on camera rear connector f48777350693 arch: arm64: config: Enable OV7251 camera sensor driver 967c41afcb4c media: Add a driver for the ov7251 camera sensor 9ca12e00f2c2 dt-bindings: media: Binding document for OV7251 camera sensor 35baa3452b19 arm64: dts: msm8996: Disable camera sensors b0196b852666 arm64: dts: msm8996: Add camss and vfe_smmu nodes c33d7744645d arm64: dts: msm8996: Add cci and ov5645 nodes ff2989777f53 media: ov5645: Supported external clock is 24MHz dbf22971ad76 camss: csiphy: Add hardware specific settle count calculation c772444f0b24 camss: Add basic runtime pm support e5cfbee3316b camss: vfe: Add VFE v4.7 (8996) hardware specific files 7aecb28f873f camss: vfe: Use hw specific code via callbacks efb6917bb702 camss: vfe: Move irq read to hw specific part 759500675f70 camss: vfe: Move hw version reading to hw specific part 122ad4e1abae camss: vfe: Move reg update clear to hw specific part 1244b394bd8d camss: vfe: Move CAMIF start/stop cmd to hw specific part 6a1181fae96f camss: vfe: Move UB size to hw specific part 19dde518af40 camss: vfe: Add VFE v4.1 (8916) hardware specific files 81299b9e47a8 camss: ispif: Extend for 8996 e52f29ec5877 camss: csid: Extend for 8996 8acb182cd650 camss: csiphy: Unify lane handling f9441d80be59 camss: csiphy: Extend for 8996 8bb9b40037e2 media: camss: Add 8996 resources f6995b5817ba camss: csiphy: Ensure clock mux config is done before the rest 582b7f3f45f6 i2c-qcom-cci: Do not control mmagic clocks caf45ede2727 [media] Rename CAMSS driver path Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-20linux-linaro-qcomlt: upgrade kernelNicolas Dechesne
c4e8eda23a71 Merge remote-tracking branch 'stan/release/qcomlt-4.14-venus' into release/qcomlt-4.14 c7da8b24f8db venus: add HEVC support for venus 3xx version c458896907f4 media: v4l2: Documentation for HEVC CIDs 0ed955d2b1a6 media: v4l2: Add v4l2 control IDs for HEVC encoder 0f861c1455af media: v4l2: Documentation of HEVC compressed format 7cf4d9735f52 media: v4l2-ioctl: add HEVC format description 4bb072bcac9c media: videodev2.h: Add v4l2 definition for HEVC b246fe99e9a0 Merge remote-tracking branch 'srini/release/qcomlt-4.14-21022018' into release/qcomlt-4.14 f6738d0132a8 arm64: dts: msm8996: Add rmtfs sharedmem node 0a04e14b5fae arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatible aa65a78be6d2 dt-binding: soc: qcom: Add binding for rmtfs memory 714a04f15503 Revert "dt: qcom: Add SAW regulator for 8x96 CPUs" 0f2f788a0ab5 venus: hfi_msgs: temporarily hardcode supported codecs b3b581bc04a1 ARM64: DTS: msm8996: db820c: Add Venus DT node 651f340a4c23 venus: vdec: fix format enumeration d19f52811819 arm64: msm8996: add compatibles for audio dais 110b667d474a soc: qcom: apr: add uevent and device table 02916f005a0b ASoC: qcom: apq8096: add module device table 0bb04c520105 ASoC: qdsp6: q6afe-dai add device id table 8358166d2fd6 ASoC: qdsp6: q6asm-dai add device id table 0656af237487 ASoC: qdsp6: q6routing add device id table 3f1baac5fd20 kernel: distro.config: enable PM8xxx RTC driver 660f0005c311 qrtr: add MODULE_ALIAS macro to smd f5e8b5579a54 kernel: distro.config: enable more networking options 7dfab3d6133d arm64: dts: apq8096-db820c: Add micro sd card supplies Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-19Merge pull request #68 from rsalveti/masterNicolas Dechesne
layer.conf: add LAYERSERIES_COMPAT markup
2018-04-16layer.conf: add LAYERSERIES_COMPAT markupRicardo Salveti
Allows the user to easily identify if the layer is compatible with oe-core. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-04-11Merge pull request #67 from ndechesne/image-fstypesNicolas Dechesne
machine: do not use _append for IMAGE_FSTYPES
2018-04-10machine: do not use _append for IMAGE_FSTYPESimage-fstypesNicolas Dechesne
As discussed on https://github.com/ndechesne/meta-qcom/issues/61, using _append will modify IMAGE_FSTYPES unconditionnally and won't give DISTRO a chance to override. Let's set sane, default settings using ?= (or +=). If a DISTRO wants to change them, we suppose they know what they do, and overwrite correctly. Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10firmware-qcom-sd-600eval: fix url linkNicolas Dechesne
It looks like the file has moved on the remote server. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10machine: Introduce the Dragonboard 600c machineBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [ndec: fixed up firmware-qcom-sd-600eval] Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10dragonboard820c: switch to 4.14 kernelNicolas Dechesne
Now that the LT 4.14 kernel branch has support for 8096 and DB820c, let's use it by default. We no longer need (and maintain the 4.11 based recipe). At this point, the 4.14 recipe is expected to be used for all 8064, 8016 and 8096 machines. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-10kernel: upgrade 4.14 kernel, include DB820c supportNicolas Dechesne
This is a fairly large kernel ugprade for the 4.14 release branch. Main changes: * DB820c support (including cpufreq, USB, WLAN, BT, UFS, Ethernet, HDMI) * Backport all remoteproc and rpmsg patches merged in 4.15, 4.16 * Backport all bugs fixes related to wcn36xx until 4.17 Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-04-05Merge pull request #66 from alimon/masterNicolas Dechesne
recipes-test: Add initramfs-bootrr-image
2018-03-22recipes-test: Add initramfs-bootrr-imageAníbal Limón
A minimal ramdisk suitable for testing, imported from, https://github.com/andersson/meta-stuff Recipes added, - bootrr: Boot regression testing - lava-test-shell: Lava test shell helpers to execute bootrr outside LAVA environment LAVA test definition run example, https://validation.linaro.org/scheduler/job/1692990 Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
2018-03-13firmware-qcom-dragonboard: fix qa warningRamon Fried
added "/boot/modem_fsg" to FILES to fix installed but not shipped warning Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 5d39fe07620748e6c67c342d2a02edea65e25276)
2018-03-12Merge pull request #64 from rsalveti/u-bootNicolas Dechesne
Define default u-boot machine for db410c and db820c
2018-03-12firmware-qcom-dragonboard: upgrade to r1034.2.1Ramon Fried
Qualcomm has release Linux BSP firmware package r1034.2.1 main changes are the following: * new golden EFS partition with sanitized defaults for GPS. * combined SBL for eMMC and SDcard. * Wifi STA/BT Coex fix * Secure boot fixes Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-03-05dragonboard-820c.conf: define default u-boot machineRicardo Salveti
As DB820c is supported by u-boot upstream, define default machine configuration. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-03-05dragonboard-410c.conf: define default u-boot machineRicardo Salveti
As DB410c is supported by u-boot upstream, define default machine configuration. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-03-02machine: db820c: switch to rootfs partitionNicolas Dechesne
New GPT scheme has been released, and the default scheme for DB820c now has 'rootfs' partition, like on DB410c, which is /dev/sda7 on DB820c. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-02-27firmware: use firmware from meta-qcomNicolas Dechesne
Some firmware blob for APQ8016 and APQ8096 are now included in linux-firmware, however not all of them. It creates conflicts when trying to install 'linux-firmware' and 'firmware-qcom-dragonboardXXX' packages. For now we want to give priority to the firmware recipe from meta-qcom, and we use RCONFLICTS/RREPLACES/RPROVIDES for that. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
2018-02-08Merge pull request #60 from rsalveti/sd-600evalNicolas Dechesne
Firmware qcom fixes for sd-600eval
2018-02-08firmware-qcom-sd-600eval: fix descriptionRicardo Salveti
Recipe is for Arrow SD 600eval and not DB410c. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-02-08firmware-qcom-sd-600eval: use nonarch_base_libdir instead of /libRicardo Salveti
Hardcoded /lib is not compatible with usrmerge. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-02-08Merge pull request #59 from rsalveti/masterNicolas Dechesne
firmware-qcom: use nonarch_base_libdir instead of /lib
2018-02-07firmware-qcom: use nonarch_base_libdir instead of /libRicardo Salveti
Hardcoded /lib is not compatible with usrmerge. Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
2018-02-02linux-linaro-qcomlt: upgrade kernelNicolas Dechesne
5511441d1b48 arm64: configs: Enable camera drivers 96e1fbc0e874 arm64: defconfig: disable ANALOG_TV and DIGITAL_TV Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit a026183ffd437dbb1ac675e602541314948f7650)
2018-01-31linux-linaro-qcomlt: upgrade kernelNicolas Dechesne
63ce309244c9 wcn36xx: release DMA memory in case of error b6969d8eb13c Merge tag 'v4.14.15' into release/qcomlt-4.14 32e9f3b4bee3 Merge remote-tracking branch 'archit/qcomlt_4.14_adv7533_fixes' into release/qcomlt-4.14 e3e0a10e6bd2 arm64: dts: msm8916: Correct ipc references for smsm 8cd71c43c06d arm64: dts: msm8916: Add missing #phy-cells Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit 44a0d383792adda9ade5465a8037fa8674d867c7)
2018-01-31recipes-kernel/linux: Update SRCREV linux-linaro-qcomlt_4.14Aníbal Limón
Contains: - wcn36xx: fix incorrect assignment to msg_body.min_ch_time - Merge remote-tracking branch 'todor/release/qcomlt-4.14-camera01' into release/qcomlt-4.14 - arm64: configs: enable BT_QCOMSMD - drm/msm: gpu: Only sync fences on rings that exist - kernel: configs: add more USB net drivers Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit d46e28c9b3da972739002a89f06ecf59cac0e16a)
2018-01-31recipes-kernel/linux: linux-linaro-qcomlt_4.14 small fixesAníbal Limón
Update copyright years and fix description 4.9 -> 4.14. Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> (cherry picked from commit e051e0679ffd9f622287c69847eb3cb117e4e0f5)
2018-01-31linux-linaro-qcomlt: switch to 4.14 based release branchNicolas Dechesne
This is a brand new branch, based on 4.14 LTS, which will be supported from now on. Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (cherry picked from commit d53bf492f2fd495c3bca2afb28f39345bba109f6)
2017-12-11Merge pull request #53 from zumbi/masterNicolas Dechesne
dragonboard-410c.conf: add wic.bmap image type