Age | Commit message (Collapse) | Author |
|
Fixes: 7829b0f0f691 (linux-linaro-qcomlt: move common settings to the
include file)
In this commit, some common config were moved into the shared include
file, however LOCALVERSION was not updated based on its value in the
kernel recipe. Restore LOCALVERSION to what it was before this patch.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
linux-linaro-qcomlt_5.13.bb: Remove duplicate inclusion of linux-qcom…
|
|
linux-qcom-bootimg.inc
Fixes parse warning
linux-linaro-qcomlt_5.13.bb: Duplicate inclusion for
/mnt/b/yoe/master/sources/meta-qcom/recipes-kernel/linux/linux-qcom-bootimg.inc in /mnt/b/yoe/master/sources/meta-qcom/
recipes-kernel/linux/linux-linaro-qcomlt_5.13.bb
% git grep linux-qcom-bootimg.inc
recipes-kernel/linux/linux-linaro-qcom.inc:require recipes-kernel/linux/linux-qcom-bootimg.inc
recipes-kernel/linux/linux-linaro-qcomlt_5.13.bb:require recipes-kernel/linux/linux-qcom-bootimg.inc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
conf/machine: Set default SERIAL_CONSOLES in qcom-common.inc
|
|
The SERIAL_CONSOLES var is used inside systemd-serialgetty.bb to
generate systemd unit to get console after boot, this fix no console in
DB845c.
Changes,
Remove SERIAL_CONSOLES set in sdx55-mtp.conf since is the default one.
Add override in sdx55-telit-fn980 to set serial console.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-kernel: Add Linux 5.13 recipe
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-graphics: mesa_git removed not needed patches
|
|
recipes-support: rmtfs bump to rev 293ab8b
|
|
Change,
293ab8b storage: Sync changes
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
0004-Revert-mesa-Enable-asm-unconditionally-now-that-gen_.patch, now in
upstream,
https://gitlab.freedesktop.org/mesa/mesa/-/commit/45206d7673adb1484cbdb3eadaf82e0849c9cdcf?merge_request_iid=1974
0003-Allow-enable-DRI-without-DRI-drivers.patch, not needed now in
recipe logic.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
qrb5165-rb5: drop lt9611uxc-upgrade
|
|
Drop lt9611uxc-upgrade recipe, it is not used anymore.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Stop installing lt9611uxc-upgrade package, it was found to be confusing
to users. It will be replaced by the notice in the release notes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Kernel recipes improvements
|
|
Update firmware packages
|
|
recipes-graphics: mesa_git refresh patches and fix deqp filename
|
|
The deqp skips file was renamed, see,
https://gitlab.freedesktop.org/mesa/mesa/-/commit/9cc1f089196f2f5c695dbf5f42b947b9970b8965
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-multimedia: Remove alsa-ucm-conf patches
|
|
The alsa-ucm-conf was bump to v1.2.5 and patches are already in
upstream.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
fastrpc: Update to latest SRCREV for SDK headers
|
|
The tip-of-tree fastrpc has had an updated applied such that it is possible
when running `bitbake rpb-desktop-image -c populate_sdk` to now populate
fastrpc headers into the resulting x-compiler.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Fixes for dsp partition mount
|
|
lt9611uxc-upgrade script: Only cat firmware version when it exists
|
|
In case dspso image is not available, we'd try to mount existing
partition using partlabel. Wait for /dev/disk/by-partlabel dir to become
available.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Modprobe socinfo module before trying to read machine id.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix the MACHINE case for the qrb5165 SoC (it was QRB5160 by my mistake).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Update script to only execute cat in directories where lt9611uxc_firmware
exists.
On my system both module and 5-002b are symbolic links, thus the previous
script would cause the lt9611uxc firmware update systemd unit to fail because
the script would try to access lt9611uxc_firmware in the module directory and
return a failure which would cause the systemd service to be listed under
'systemctl list-units --failed'
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
|
|
recipes-graphics: mesa_git update to rev 26677008b9a
|
|
conf/machine: Add linux-firmware-qca for dragonboard-820c
|
|
To install qca/nvm_00440302.bin required for bluetooth.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
- Update branch name to main.
- Update PV to 2x.x-dev recently mesa bump to 21.x versions so use 2x.x
for our mesa_git dev build.
- Refresh patches to avoid warnings when apply.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
layer.conf: set LAYERDEPENDS
|
|
meta-qcom depends only oe-core, mark it explicitely. The layer has
additional dependencies on meta-oe or meta-networking, but they are
optional.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Firmware 1036.1 was never release for further redistribution, however it
can be manually downloaded from Qualcomm site. Add a recipe to build it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Install an image with DSP shell and libraries.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Install an image with DSP shell and libraries.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Change all firmware packages to use allarch.bbclass (as linux-firmware
does) rather than tying them to the ${MACHINE}, since there is nothing
machine-specific in firmware packgages themselves (and qcom-armv8a
machine will include some of them anyway).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Simplify handling of kernel config:
- call sed directly from kernel_conf_variable function
- split do_confugure into prepend and append functions to be wrapped
around kernel_do_configure (removing make oldconfig call)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move common linux-linaro-qcomlt settings to the include file, allowing
recipes to contain just the 'reqiure' line and SRCREV.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use 'arm' override for apq8064 and sdx55 instead of specifying them one-by-one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove unused removal of 'arch' from ERROR_QA: kernel build no longer
include WiFi firmware, so this is unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
linux-linaro-qcomlt_5.12: update SRCREV
|
|
Update SRCREV to include Venus firmware filename fix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
lt9611uxc-upgrade: fix systemd condition name
|
|
RB5: update firmware-qcom-rb5 and linux-linaro-qcomlt
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Update RB5 kernel from 5.11 to 5.12.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Update to the new firmware release. This provides updated a650 firmware,
fixing security issues, which shoul work with 5.12 kernel.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|