aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/mkefidisk.sh
diff options
context:
space:
mode:
authorDarren Hart <dvhart@linux.intel.com>2013-05-18 16:11:03 -0700
committerDarren Hart <dvhart@linux.intel.com>2013-05-20 21:18:22 -0700
commit1ca092e03fc7b87f5e1343ca829ed2a7218d8d4a (patch)
treee2873891614e5fd181e7e0ce04ac0efbd233443d /scripts/mkefidisk.sh
downloadmeta-minnow-0.9-rc2-danny-8.0.1.tar.gz
meta-minnow-0.9-rc2-danny-8.0.1.tar.bz2
meta-minnow-0.9-rc2-danny-8.0.1.zip
MinnowBoard BSP Layer0.9-rc2-danny-8.0.1
The MinnowBoard (minnowboard.org) is an Intel Atom E640T processor coupled with an Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff = Queens Bay). The E6xx CPU embeds on-chip graphics supported by the Intel Embedded Media and Graphics Driver (EMGD). The board targets the small and low-cost embedded market for the developer and maker community. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Diffstat (limited to 'scripts/mkefidisk.sh')
-rwxr-xr-xscripts/mkefidisk.sh276
1 files changed, 276 insertions, 0 deletions
diff --git a/scripts/mkefidisk.sh b/scripts/mkefidisk.sh
new file mode 100755
index 0000000..0c15104
--- /dev/null
+++ b/scripts/mkefidisk.sh
@@ -0,0 +1,276 @@
+#!/bin/sh
+#
+# Copyright (c) 2012, Intel Corporation.
+# All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+LANG=C
+
+#
+# Defaults
+#
+# 20 Mb for the boot partition
+BOOT_SIZE=20
+# 5% for swap
+SWAP_RATIO=5
+
+function usage() {
+ echo "Usage: $(basename $0) DEVICE HDDIMG TARGET_DEVICE"
+ echo " DEVICE: The device to write the image to, e.g. /dev/sdh"
+ echo " HDDIMG: The hddimg file to generate the efi disk from"
+ echo " TARGET_DEVICE: The device the target will boot from, e.g. /dev/mmcblk0"
+}
+
+function image_details() {
+ IMG=$1
+ echo "Image details"
+ echo "============="
+ echo " image: $(stat --printf '%N\n' $IMG)"
+ echo " size: $(stat -L --printf '%s bytes\n' $IMG)"
+ echo " modified: $(stat -L --printf '%y\n' $IMG)"
+ echo " type: $(file -L -b $IMG)"
+ echo ""
+}
+
+function device_details() {
+ DEV=$1
+ BLOCK_SIZE=512
+
+ echo "Device details"
+ echo "=============="
+ echo " device: $DEVICE"
+ if [ -f "/sys/class/block/$DEV/device/vendor" ]; then
+ echo " vendor: $(cat /sys/class/block/$DEV/device/vendor)"
+ else
+ echo " vendor: UNKOWN"
+ fi
+ if [ -f "/sys/class/block/$DEV/device/model" ]; then
+ echo " model: $(cat /sys/class/block/$DEV/device/model)"
+ else
+ echo " model: UNKNOWN"
+ fi
+ if [ -f "/sys/class/block/$DEV/size" ]; then
+ echo " size: $[$(cat /sys/class/block/$DEV/size)*BLOCK_SIZE] bytes"
+ else
+ echo " size: UNKNOWN"
+ fi
+ echo ""
+}
+
+function unmount_device() {
+ grep -q $DEVICE /proc/mounts
+ if [ $? -eq 0 ]; then
+ echo -n "$DEVICE listed in /proc/mounts, attempting to unmount..."
+ umount $DEVICE* 2>/dev/null
+ grep -q $DEVICE /proc/mounts
+ if [ $? -eq 0 ]; then
+ echo "FAILED"
+ exit 1
+ fi
+ echo "OK"
+ fi
+}
+
+
+#
+# Parse and validate arguments
+#
+if [ $# -ne 3 ]; then
+ usage
+ exit 1
+fi
+
+DEVICE=$1
+HDDIMG=$2
+TARGET_DEVICE=$3
+
+if [ ! -w "$DEVICE" ]; then
+ echo "ERROR: Device $DEVICE does not exist or is not writable"
+ usage
+ exit 1
+fi
+
+if [ ! -e "$HDDIMG" ]; then
+ echo "ERROR: HDDIMG $HDDIMG does not exist"
+ usage
+ exit 1
+fi
+
+
+#
+# Check if any $DEVICE partitions are mounted
+#
+unmount_device
+
+
+#
+# Confirm device with user
+#
+image_details $HDDIMG
+device_details $(basename $DEVICE)
+echo -n "Prepare EFI image on $DEVICE [y/N]? "
+read RESPONSE
+if [ "$RESPONSE" != "y" ]; then
+ echo "Image creation aborted"
+ exit 0
+fi
+
+
+#
+# Partition $DEVICE
+#
+DEVICE_SIZE=$(parted $DEVICE unit mb print | grep ^Disk | cut -d" " -f 3 | sed -e "s/MB//")
+SWAP_SIZE=$((DEVICE_SIZE*SWAP_RATIO/100))
+ROOTFS_SIZE=$((DEVICE_SIZE-BOOT_SIZE-SWAP_SIZE))
+ROOTFS_START=$((BOOT_SIZE))
+ROOTFS_END=$((ROOTFS_START+ROOTFS_SIZE))
+SWAP_START=$((ROOTFS_END))
+
+# MMC devices use a partition prefix character 'p'
+PART_PREFIX=""
+if [ ! "${DEVICE#/dev/mmcblk}" = "${DEVICE}" ]; then
+ PART_PREFIX="p"
+fi
+BOOTFS=$DEVICE${PART_PREFIX}1
+ROOTFS=$DEVICE${PART_PREFIX}2
+SWAP=$DEVICE${PART_PREFIX}3
+
+TARGET_PART_PREFIX=""
+if [ ! "${TARGET_DEVICE#/dev/mmcblk}" = "${TARGET_DEVICE}" ]; then
+ TARGET_PART_PREFIX="p"
+fi
+TARGET_ROOTFS=$TARGET_DEVICE${TARGET_PART_PREFIX}2
+TARGET_SWAP=$TARGET_DEVICE${TARGET_PART_PREFIX}3
+
+echo "*****************"
+echo "Boot partition size: $BOOT_SIZE MB ($BOOTFS)"
+echo "ROOTFS partition size: $ROOTFS_SIZE MB ($ROOTFS)"
+echo "Swap partition size: $SWAP_SIZE MB ($SWAP)"
+echo "*****************"
+
+echo "Deleting partition table on $DEVICE ..."
+dd if=/dev/zero of=$DEVICE bs=512 count=2
+
+# Use MSDOS by default as GPT cannot be reliably distributed in disk image form
+# as it requires the backup table to be on the last block of the device, which
+# of course varies from device to device.
+echo "Creating new partition table (MSDOS) on $DEVICE ..."
+parted $DEVICE mklabel msdos
+
+echo "Creating boot partition on $BOOTFS"
+parted $DEVICE mkpart primary 0% $BOOT_SIZE
+
+echo "Enabling boot flag on $BOOTFS"
+parted $DEVICE set 1 boot on
+
+echo "Creating ROOTFS partition on $ROOTFS"
+parted $DEVICE mkpart primary $ROOTFS_START $ROOTFS_END
+
+echo "Creating swap partition on $SWAP"
+parted $DEVICE mkpart primary $SWAP_START 100%
+
+parted $DEVICE print
+
+
+#
+# Check if any $DEVICE partitions are mounted after partitioning
+#
+unmount_device
+
+
+#
+# Format $DEVICE partitions
+#
+echo ""
+echo "Formatting $BOOTFS as vfat..."
+mkfs.vfat $BOOTFS -n "efi"
+
+echo "Formatting $ROOTFS as ext3..."
+mkfs.ext3 $ROOTFS -L "root"
+
+echo "Formatting swap partition...($SWAP)"
+mkswap $SWAP
+
+
+#
+# Installing to $DEVICE
+#
+echo ""
+echo "Mounting images and device in preparation for installation..."
+TMPDIR=$(mktemp -d mkefidisk-XXX)
+if [ $? -ne 0 ]; then
+ echo "ERROR: Failed to create temporary mounting directory."
+ exit 1
+fi
+HDDIMG_MNT=$TMPDIR/hddimg
+HDDIMG_ROOTFS_MNT=$TMPDIR/hddimg_rootfs
+ROOTFS_MNT=$TMPDIR/rootfs
+BOOTFS_MNT=$TMPDIR/bootfs
+mkdir $HDDIMG_MNT
+mkdir $HDDIMG_ROOTFS_MNT
+mkdir $ROOTFS_MNT
+mkdir $BOOTFS_MNT
+
+mount -o loop $HDDIMG $HDDIMG_MNT
+mount -o loop $HDDIMG_MNT/rootfs.img $HDDIMG_ROOTFS_MNT
+mount $ROOTFS $ROOTFS_MNT
+mount $BOOTFS $BOOTFS_MNT
+
+echo "Copying ROOTFS files..."
+cp -a $HDDIMG_ROOTFS_MNT/* $ROOTFS_MNT
+
+echo "$TARGET_SWAP swap swap defaults 0 0" >> $ROOTFS_MNT/etc/fstab
+
+# We dont want udev to mount our root device while we're booting...
+if [ -d $ROOTFS_MNT/etc/udev/ ] ; then
+ echo "$TARGET_DEVICE" >> $ROOTFS_MNT/etc/udev/mount.blacklist
+fi
+
+umount $ROOTFS_MNT
+umount $HDDIMG_ROOTFS_MNT
+
+echo "Preparing boot partition..."
+EFIDIR="$BOOTFS_MNT/EFI/BOOT"
+mkdir -p $EFIDIR
+GRUBCFG="$EFIDIR/grub.cfg"
+
+cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT
+# Copy the efi loader and config (booti*.efi and grub.cfg)
+cp $HDDIMG_MNT/EFI/BOOT/* $EFIDIR
+
+# Update grub config for the installed image
+# Delete the install entry
+sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
+# Delete the initrd lines
+sed -i "/initrd /d" $GRUBCFG
+# Delete any LABEL= strings
+sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
+# Remove any existing root= kernel parameters and:
+# o Add a root= parameter with the target rootfs
+# o Specify ro so fsck can be run during boot
+# o Specify rootwait in case the target media is an asyncronous block device
+# such as MMC or USB disks
+# o Specify "quiet" to minimize boot time when using slow serial consoles
+sed -i "s@ root=[^ ]*@ @" $GRUBCFG
+sed -i "s@vmlinuz @vmlinuz root=$TARGET_ROOTFS ro rootwait quiet @" $GRUBCFG
+
+umount $BOOTFS_MNT
+umount $HDDIMG_MNT
+rm -rf $TMPDIR
+sync
+
+echo "Installation complete."