MACHINEOVERRIDES =. "imx-boot-container:mx8:mx8m:mx8mm:" require conf/machine/include/imx-base.inc require conf/machine/include/tune-cortexa53.inc MACHINE_FEATURES += "pci wifi bluetooth bcm43455 bcm4356" # NXP BSP can consume BCM4359 and QCA9377 driver and firmware # Since the firmware is not available publicly, and rather distributed # under "Proprietary" license - we opt-out from using it in all BSPs # and pin it to NXP BSP only # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have # a full support for it yet. MACHINE_FEATURES_append_use-nxp-bsp = " optee bcm4359 qca9377" KERNEL_DEVICETREE = " \ freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \ " KERNEL_DEVICETREE_append_use-nxp-bsp = " \ freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \ freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \ " UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb" IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx" IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc" UBOOT_SUFFIX = "bin" UBOOT_CONFIG ??= "sd" UBOOT_CONFIG[sd] = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard" UBOOT_CONFIG[mfgtool] = "${UBOOT_CONFIG_BASENAME}_defconfig" SPL_BINARY = "spl/u-boot-spl.bin" ATF_PLATFORM = "imx8mm" ATF_LOAD_ADDR = "0x920000" # Extra firmware package name, that is required to build boot container for fslc bsp IMX_EXTRA_FIRMWARE = "firmware-imx-8m" IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', '${IMXBOOT_TARGETS_BASENAME}', d)}" IMX_BOOT_SOC_TARGET = "iMX8MM" SERIAL_CONSOLES = "115200;ttymxc1" LOADADDR = "" UBOOT_SUFFIX = "bin" UBOOT_MAKE_TARGET = "all" IMX_BOOT_SEEK = "33" OPTEE_BIN_EXT = "8mm" TEE_LOAD_ADDR = "0xbe000000" # Add additional firmware MACHINE_FIRMWARE_append = " linux-firmware-ath10k"