MACHINEOVERRIDES =. "mx8dxl:" require conf/machine/include/imx-base.inc require conf/machine/include/arm/armv8a/tune-cortexa35.inc IMX_DEFAULT_BSP = "nxp" MACHINE_FEATURES += "pci bcm43455 bcm4356 nxp8997-pcie nxp9098-pcie" MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359" # Don't include kernels in standard images RRECOMMENDS:${KERNEL_PACKAGE_NAME}-base = "" LOADADDR = "" # Disable the serial console due to auto-serial-console SERIAL_CONSOLES = "115200;ttyLP0" # we do not want to have getty running on tty1 as we run # auto-serial-console there USE_VT = "0" KERNEL_DEVICETREE = " \ freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \ " KERNEL_DEVICETREE:append:use-nxp-bsp = " \ freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \ " ATF_PLATFORM = "imx8dxl" IMX_BOOT_SOC_TARGET = "iMX8DXL" # This machine is not supported by u-boot-fslc, so we force it to use # u-boot-imx here. IMX_DEFAULT_BOOTLOADER = "u-boot-imx" UBOOT_MAKE_TARGET = "all" SPL_BINARY = "spl/u-boot-spl.bin" UBOOT_SUFFIX = "bin" UBOOT_CONFIG ??= "sd" UBOOT_CONFIG[sd] = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard" UBOOT_CONFIG[fspi] = "${UBOOT_CONFIG_BASENAME}_fspi_defconfig" IMX_BOOT_SEEK = "32" IMXBOOT_TARGETS_SD = \ "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl', \ 'flash', d)}" IMXBOOT_TARGETS_FSPI = \ "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_flexspi', \ 'flash_flexspi', d)}" IMXBOOT_TARGETS_NAND = \ "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'flash_spl_nand', \ 'flash_nand flash_nand_fw', d)}" IMXBOOT_TARGETS = \ "${@bb.utils.contains('UBOOT_CONFIG', 'sd', '${IMXBOOT_TARGETS_SD}', \ bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_FSPI}', \ bb.utils.contains('UBOOT_CONFIG', 'nand', '${IMXBOOT_TARGETS_NAND}', \ 'INVALID', d), d), d)}"