From 7d08c14012602dc43c5b92b4fe0848801d6d54c1 Mon Sep 17 00:00:00 2001 From: Chaudhary Amit Kumar Date: Tue, 12 Feb 2019 19:14:24 +0530 Subject: [PATCH 5737/5758] mmc: sdhci: Add 32-bit block count support for v4 mode Host Controller Version 4.10 re-defines SDMA System Address register as 32-bit Block Count for v4 mode, and SDMA uses ADMA System Address register (05Fh-058h) instead if v4 mode is enabled. Also when using 32-bit block count, 16-bit block count register need to be set to zero. Since using 32-bit Block Count would cause problems for auto-cmd23, it can be chosen via host->quirk2. Signed-off-by: Chunyan Zhang Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sudheesh Mavila Signed-off-by: Chaudhary Amit Kumar --- drivers/mmc/host/sdhci.c | 14 +++++++++++++- drivers/mmc/host/sdhci.h | 8 ++++++++ 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0cd4b1e..a082614 100755 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -998,7 +998,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) /* Set the DMA boundary value and block size */ sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), SDHCI_BLOCK_SIZE); - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + + /* + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count + * can be supported, in that case 16-bit block count register must be 0. + */ + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { + if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); + sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); + } else { + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + } } static inline bool sdhci_auto_cmd12(struct sdhci_host *host, diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 2763970..73ae5f8 100755 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -28,6 +28,7 @@ #define SDHCI_DMA_ADDRESS 0x00 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS +#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) @@ -449,6 +450,13 @@ struct sdhci_host { #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) /* Controller has CRC in 136 bit Command Response */ #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) +/* + * 32-bit block count may not support eMMC where upper bits of CMD23 are used + * for other purposes. Consequently we support 16-bit block count by default. + * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit + * block count. + */ +#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) #define SDHCI_QUIRK2_BROKEN_TUNING_WA (1<<17) int irq; /* Device IRQ */ -- 2.7.4