From 7f28003bfe1aa912541f2c24a80bddb86be24b05 Mon Sep 17 00:00:00 2001 From: Joshua Aberback Date: Mon, 29 Apr 2019 17:21:19 -0400 Subject: [PATCH 1968/2940] drm/amd/display: Program VTG params after programming Global Sync [Why] VTG has a parameter FP2, which is defined as: if VSTARTUP is before VSYNC: FP2 = number of lines in between VSTARTUP and VSYNC else FP2 = 0 Currently, FP2 is only programmed during "program_timing". However, the position of VSTARTUP is affected by the prefetching requirements on all pipes, so the position might change when we do memory request control on another pipe, so we need to make sure that FP2 stays up-to-date whenever we adjust VSTARTUP. [How] - refactor VTG_CONTROL programming into a new function "set_vtg_params" - call it after calling "program_global_sync" - make sure it's called after because it relies on the cached dlg params Signed-off-by: Joshua Aberback Reviewed-by: Tony Cheng Acked-by: Bhawanpreet Lakha Acked-by: Jun Lei --- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 3 + .../gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 115 ++++++++++-------- .../gpu/drm/amd/display/dc/dcn10/dcn10_optc.h | 3 + .../amd/display/dc/inc/hw/timing_generator.h | 2 + 4 files changed, 73 insertions(+), 50 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 58d3fd742eab..faded9fb15b4 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -2284,6 +2284,9 @@ static void program_all_pipe_in_tree( pipe_ctx->pipe_dlg_param.vupdate_offset, pipe_ctx->pipe_dlg_param.vupdate_width); + pipe_ctx->stream_res.tg->funcs->set_vtg_params( + pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); + dc->hwss.blank_pixel_data(dc, pipe_ctx, blank); } diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c index 3bddaedcb527..13fe638c9d9c 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c @@ -46,9 +46,7 @@ * This is a workaround for a bug that has existed since R5xx and has not been * fixed keep Front porch at minimum 2 for Interlaced mode or 1 for progressive. */ -static void optc1_apply_front_porch_workaround( - struct timing_generator *optc, - struct dc_crtc_timing *timing) +static void apply_front_porch_workaround(struct dc_crtc_timing *timing) { if (timing->flags.INTERLACE == 1) { if (timing->v_front_porch < 2) @@ -149,17 +147,14 @@ void optc1_program_timing( bool use_vbios) { struct dc_crtc_timing patched_crtc_timing; - uint32_t vesa_sync_start; uint32_t asic_blank_end; uint32_t asic_blank_start; uint32_t v_total; uint32_t v_sync_end; - uint32_t v_init, v_fp2; uint32_t h_sync_polarity, v_sync_polarity; uint32_t start_point = 0; uint32_t field_num = 0; uint32_t h_div_2; - int32_t vertical_line_start; struct optc *optc1 = DCN10TG_FROM_TG(optc); @@ -169,7 +164,7 @@ void optc1_program_timing( optc1->vupdate_offset = vupdate_offset; optc1->vupdate_width = vupdate_width; patched_crtc_timing = *dc_crtc_timing; - optc1_apply_front_porch_workaround(optc, &patched_crtc_timing); + apply_front_porch_workaround(&patched_crtc_timing); /* Load horizontal timing */ @@ -182,24 +177,16 @@ void optc1_program_timing( OTG_H_SYNC_A_START, 0, OTG_H_SYNC_A_END, patched_crtc_timing.h_sync_width); - /* asic_h_blank_end = HsyncWidth + HbackPorch = - * vesa. usHorizontalTotal - vesa. usHorizontalSyncStart - - * vesa.h_left_border - */ - vesa_sync_start = patched_crtc_timing.h_addressable + - patched_crtc_timing.h_border_right + + /* blank_start = line end - front porch */ + asic_blank_start = patched_crtc_timing.h_total - patched_crtc_timing.h_front_porch; - asic_blank_end = patched_crtc_timing.h_total - - vesa_sync_start - + /* blank_end = blank_start - active */ + asic_blank_end = asic_blank_start - + patched_crtc_timing.h_border_right - + patched_crtc_timing.h_addressable - patched_crtc_timing.h_border_left; - /* h_blank_start = v_blank_end + v_active */ - asic_blank_start = asic_blank_end + - patched_crtc_timing.h_border_left + - patched_crtc_timing.h_addressable + - patched_crtc_timing.h_border_right; - REG_UPDATE_2(OTG_H_BLANK_START_END, OTG_H_BLANK_START, asic_blank_start, OTG_H_BLANK_END, asic_blank_end); @@ -231,24 +218,15 @@ void optc1_program_timing( OTG_V_SYNC_A_START, 0, OTG_V_SYNC_A_END, v_sync_end); - vesa_sync_start = patched_crtc_timing.v_addressable + - patched_crtc_timing.v_border_bottom + + /* blank_start = frame end - front porch */ + asic_blank_start = patched_crtc_timing.v_total - patched_crtc_timing.v_front_porch; - asic_blank_end = (patched_crtc_timing.v_total - - vesa_sync_start - - patched_crtc_timing.v_border_top); - - /* v_blank_start = v_blank_end + v_active */ - asic_blank_start = asic_blank_end + - (patched_crtc_timing.v_border_top + - patched_crtc_timing.v_addressable + - patched_crtc_timing.v_border_bottom); - - vertical_line_start = asic_blank_end - optc1->vstartup_start + 1; - v_fp2 = 0; - if (vertical_line_start < 0) - v_fp2 = -vertical_line_start; + /* blank_end = blank_start - active */ + asic_blank_end = asic_blank_start - + patched_crtc_timing.v_border_bottom - + patched_crtc_timing.v_addressable - + patched_crtc_timing.v_border_top; REG_UPDATE_2(OTG_V_BLANK_START_END, OTG_V_BLANK_START, asic_blank_start, @@ -261,10 +239,9 @@ void optc1_program_timing( REG_UPDATE(OTG_V_SYNC_A_CNTL, OTG_V_SYNC_A_POL, v_sync_polarity); - v_init = asic_blank_start; if (optc1->signal == SIGNAL_TYPE_DISPLAY_PORT || - optc1->signal == SIGNAL_TYPE_DISPLAY_PORT_MST || - optc1->signal == SIGNAL_TYPE_EDP) { + optc1->signal == SIGNAL_TYPE_DISPLAY_PORT_MST || + optc1->signal == SIGNAL_TYPE_EDP) { start_point = 1; if (patched_crtc_timing.flags.INTERLACE == 1) field_num = 1; @@ -272,13 +249,10 @@ void optc1_program_timing( /* Interlace */ if (REG(OTG_INTERLACE_CONTROL)) { - if (patched_crtc_timing.flags.INTERLACE == 1) { + if (patched_crtc_timing.flags.INTERLACE == 1) REG_UPDATE(OTG_INTERLACE_CONTROL, OTG_INTERLACE_ENABLE, 1); - v_init = v_init / 2; - if ((optc1->vstartup_start/2)*2 > asic_blank_end) - v_fp2 = v_fp2 / 2; - } else + else REG_UPDATE(OTG_INTERLACE_CONTROL, OTG_INTERLACE_ENABLE, 0); } @@ -287,21 +261,19 @@ void optc1_program_timing( REG_UPDATE(CONTROL, VTG0_ENABLE, 0); - REG_UPDATE_2(CONTROL, - VTG0_FP2, v_fp2, - VTG0_VCOUNT_INIT, v_init); - /* original code is using VTG offset to address OTG reg, seems wrong */ REG_UPDATE_2(OTG_CONTROL, OTG_START_POINT_CNTL, start_point, OTG_FIELD_NUMBER_CNTL, field_num); - optc1_program_global_sync(optc, + optc->funcs->program_global_sync(optc, vready_offset, vstartup_start, vupdate_offset, vupdate_width); + optc->funcs->set_vtg_params(optc, dc_crtc_timing); + /* TODO * patched_crtc_timing.flags.HORZ_COUNT_BY_TWO == 1 * program_horz_count_by_2 @@ -319,6 +291,48 @@ void optc1_program_timing( } +void optc1_set_vtg_params(struct timing_generator *optc, + const struct dc_crtc_timing *dc_crtc_timing) +{ + struct dc_crtc_timing patched_crtc_timing; + uint32_t asic_blank_end; + uint32_t v_init; + uint32_t v_fp2 = 0; + int32_t vertical_line_start; + + struct optc *optc1 = DCN10TG_FROM_TG(optc); + + patched_crtc_timing = *dc_crtc_timing; + apply_front_porch_workaround(&patched_crtc_timing); + + /* VCOUNT_INIT is the start of blank */ + v_init = patched_crtc_timing.v_total - patched_crtc_timing.v_front_porch; + + /* end of blank = v_init - active */ + asic_blank_end = v_init - + patched_crtc_timing.v_border_bottom - + patched_crtc_timing.v_addressable - + patched_crtc_timing.v_border_top; + + /* if VSTARTUP is before VSYNC, FP2 is the offset, otherwise 0 */ + vertical_line_start = asic_blank_end - optc1->vstartup_start + 1; + if (vertical_line_start < 0) + v_fp2 = -vertical_line_start; + + /* Interlace */ + if (REG(OTG_INTERLACE_CONTROL)) { + if (patched_crtc_timing.flags.INTERLACE == 1) { + v_init = v_init / 2; + if ((optc1->vstartup_start/2)*2 > asic_blank_end) + v_fp2 = v_fp2 / 2; + } + } + + REG_UPDATE_2(CONTROL, + VTG0_FP2, v_fp2, + VTG0_VCOUNT_INIT, v_init); +} + void optc1_set_blank_data_double_buffer(struct timing_generator *optc, bool enable) { struct optc *optc1 = DCN10TG_FROM_TG(optc); @@ -1451,6 +1465,7 @@ static const struct timing_generator_funcs dcn10_tg_funcs = { .clear_optc_underflow = optc1_clear_optc_underflow, .get_crc = optc1_get_crc, .configure_crc = optc1_configure_crc, + .set_vtg_params = optc1_set_vtg_params, }; void dcn10_timing_generator_init(struct optc *optc1) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h index 7bb414c35d13..651b8caa4b9f 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h @@ -597,4 +597,7 @@ bool optc1_get_crc(struct timing_generator *optc, bool optc1_is_two_pixels_per_containter(const struct dc_crtc_timing *timing); +void optc1_set_vtg_params(struct timing_generator *optc, + const struct dc_crtc_timing *dc_crtc_timing); + #endif /* __DC_TIMING_GENERATOR_DCN10_H__ */ diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h index e4b0de0089af..0b8c6896581f 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h @@ -238,6 +238,8 @@ struct timing_generator_funcs { bool (*get_crc)(struct timing_generator *tg, uint32_t *r_cr, uint32_t *g_y, uint32_t *b_cb); + void (*set_vtg_params)(struct timing_generator *optc, + const struct dc_crtc_timing *dc_crtc_timing); }; #endif -- 2.17.1