diff options
-rw-r--r-- | RELEASE.md | 89 |
1 files changed, 33 insertions, 56 deletions
@@ -1,71 +1,48 @@ # Release notes -This is the release notes document for the AMD BSP V1000. This document +This is the release notes document for the AMD BSP E3000. This document contains information about the Yocto layers' git repos, their branches and commit hashes, software versions, and known/fixed issues/limitations. ## Layers | Layer | Git Repo | Branch | Commit Hash | |:------------------|:---------------------------------------------|:--------|:-----------------------------------------| -| poky | git://git.yoctoproject.org/poky | warrior | 79a850a10a4b88a6d20d607b322542f947874323 | -| meta-openembedded | git://git.openembedded.org/meta-openembedded | warrior | f4ccdf2bc3fe4f00778629088baab840c868e36b | +| poky | git://git.yoctoproject.org/poky | warrior | 023ff85a9ae94331926e923b346fd8a349881e63 | +| meta-openembedded | git://git.openembedded.org/meta-openembedded | warrior | a24acf94d48d635eca668ea34598c6e5c857e3f8 | | meta-dpdk | git://git.yoctoproject.org/meta-dpdk | warrior | c8c30c2c4e2f36b4a55a69a475fe774015423705 | -| meta-amd | git://git.yoctoproject.org/meta-amd | warrior | tags/warrior-v1000-ga-201912 | +| meta-amd | git://git.yoctoproject.org/meta-amd | warrior | tags/warrior-e3000-ga-202002 | ## Softwares -| Software | Version | -|:---------------|:-------------| -| BIOS | RBB1202B | -| linux-yocto | 4.19.8 | -| gcc | 8.3.0 | -| util-linux | 2.32.1 | -| grub | 2.02 | -| pulseaudio | 12.2 | -| xf86-video-amd | 19.0.1 | -| xserver | 1.20.4 | -| mesa | 19.2.0-devel | -| libdrm | 2.4.99 | -| llvm | 9.0.0 | -| vulkan | 1.1.92.1 | -| libomxil | 0.9.3 | -| libva | 2.4.0 | -| libvdpau | 1.1.1 | -| gstreamer | 1.14.4 | -| mpv | 0.28.2 | -| ffmpeg | 4.0.2 | -| lttng | 2.10 | -| babeltrace | 1.5.6 | -| connman | 1.36 | -| gdb | 8.2.1 | -| rgp | 1.5.1 | +| Software | Version | +|:----------------|:---------| +| BIOS | RWB1100C | +| Yocto Poky Base | 2.7.2 | +| linux-yocto | 4.19.8 | +| gcc | 8.3.0 | +| util-linux | 2.32.1 | +| grub | 2.02 | +| lttng | 2.10 | +| babeltrace | 1.5.6 | +| connman | 1.36 | +| gdb | 8.2.1 | +| dpdk | 18.11.1 | +| strongswan | 5.7.1 | ## Fixed Issues -| # V1000 Fixed Issues # | -|:------------------------------------------------------------------------------------| -| Hard hang with mpv vaapi-vappi configuration in fullscreen mode on V1000 | -| Stutter observed with 4k@60 video playback on V1000 | -| Display goes blank after hotplug of third monitor on V1000 | -| Glmark2 overnight hang | -| I2S Audio one side of headset is not audible while playing i2S audio on V1000/R1000 | +| # E3000 Fixed Issues # | +|:---------------------------------------------------------------------------------------------------------| +| SFP peer to peer between two EPYC 3000 is not working. | +| Reboot test fails at ~30 cycles. | +| Transfer rate is very low (3.63Gb/sec) on both kernel for 10G peer to peer (Switch) scenario with iperf. | +| I2C3 fails to operate at FM+ (1000k) and 100k speeds. | +| Not able to install ubuntu 18.04.1 emmc server OS on eMMC (all modes). | ## Known Issues -| # V1000 Known Issues/Limitations # | -|:----------------------------------------------------------------------------------------------------------------------| -| Stuttering is observed with vulkan hologram sample on 4k monitor full screen mode | -| S3 fails at 25th cycle on Dibbler V1000 due to PSP bug | -| Display artifacts while doing S3 with max 4k monitors on APU’s | -| __* XGBE__ | -| SFP wont work on V1807 platforms after few hours | -| Ethernet link is showing always up on RJ45 ports of Bilby platforms | -| _** Workaround: Disable the port which is not connected the ethernet cable_ | -| Hotplug failures and stability issue with longer duration performance test on Bilby platforms with RJ45 ports enabled | -| _** Workaround: Disable the port which is not connected the ethernet cable_ | -| Can’t concurrently enable SFP+ and RJ45 interfaces | -| Peer to Peer network is unstable with 1/10G SFP (FC) | -| No IEEE 1588 Timestamp support | -| No receive split header support | -| __* Following features should be functional but have not been fully validated:__ | -| *** Priority and VLAN (VLAN Priority Control) | -| *** RMON Counter | -| *** VLAN support and Receive-Side scaling | -| *** 2.5G TCP/IP offload (duplex) and 2.5G jumbo frames (duplex) | +| # E3000 Known Issues/Limitations # | +|:-----------------------------------------------------------------------------------------------------------------------------------------------------| +| Bandwidth drop observed when running all ports simultaneously with default system configuration and the solution is system level tuning is required. | +| Peer to peer network between EPYC 3000 Series CPUs (using xgbe) is not working with few finisar SFP modules. | +| FIO Sequential Read/Write ZE3351HAQCAAF_30Performs better than ZE3451HAQGAAF_30. | +| FIO Random Read/write performance for QD32 BS4k is low compared with spec. | +| S3 is not POR for Linux server OS. | +| DPDK does not work when IOMMU is enabled in BIOS. | |