/* SPDX-License-Identifier: GPL-2.0 */ /* * linux/include/linux/sunrpc/msg_prot.h * * Copyright (C) 1996, Olaf Kirch */ #ifndef _LINUX_SUNRPC_MSGPROT_H_ #define _LINUX_SUNRPC_MSGPROT_H_ #define RPC_VERSION 2 /* spec defines authentication flavor as an unsigned 32 bit integer */ typedef u32 rpc_authflavor_t; enum rpc_auth_flavors { RPC_AUTH_NULL = 0, RPC_AUTH_UNIX = 1, RPC_AUTH_SHORT = 2, RPC_AUTH_DES = 3, RPC_AUTH_KRB = 4, RPC_AUTH_GSS = 6, RPC_AUTH_MAXFLAVOR = 8, /* pseudoflavors: */ RPC_AUTH_GSS_KRB5 = 390003, RPC_AUTH_GSS_KRB5I = 390004, RPC_AUTH_GSS_KRB5P = 390005, RPC_AUTH_GSS_LKEY = 390006, RPC_AUTH_GSS_LKEYI = 390007, RPC_AUTH_GSS_LKEYP = 390008, RPC_AUTH_GSS_SPKM = 390009, RPC_AUTH_GSS_SPKMI = 390010, RPC_AUTH_GSS_SPKMP = 390011, }; /* Maximum size (in bytes) of an rpc credential or verifier */ #define RPC_MAX_AUTH_SIZE (400) enum rpc_msg_type { RPC_CALL = 0, RPC_REPLY = 1 }; enum rpc_reply_stat { RPC_MSG_ACCEPTED = 0, RPC_MSG_DENIED = 1 }; enum rpc_accept_stat { RPC_SUCCESS = 0, RPC_PROG_UNAVAIL = 1, RPC_PROG_MISMATCH = 2, RPC_PROC_UNAVAIL = 3, RPC_GARBAGE_ARGS = 4, RPC_SYSTEM_ERR = 5, /* internal use only */ RPC_DROP_REPLY = 60000, }; enum rpc_reject_stat { RPC_MISMATCH = 0, RPC_AUTH_ERROR = 1 }; enum rpc_auth_stat { RPC_AUTH_OK = 0, RPC_AUTH_BADCRED = 1, RPC_AUTH_REJECTEDCRED = 2, RPC_AUTH_BADVERF = 3, RPC_AUTH_REJECTEDVERF = 4, RPC_AUTH_TOOWEAK = 5, /* RPCSEC_GSS errors */ RPCSEC_GSS_CREDPROBLEM = 13, RPCSEC_GSS_CTXPROBLEM = 14 }; #define RPC_MAXNETNAMELEN 256 /* * From RFC 1831: * * "A record is composed of one or more record fragments. A record * fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of * fragment data. The bytes encode an unsigned binary number; as with * XDR integers, the byte order is from highest to lowest. The number * encodes two values -- a boolean which indicates whether the fragment * is the last fragment of the record (bit value 1 implies the fragment * is the last fragment) and a 31-bit unsigned binary value which is the * length in bytes of the fragment's data. The boolean value is the * highest-order bit of the header; the length is the 31 low-order bits. * (Note that this record specification is NOT in XDR standard form!)" * * The Linux RPC client always sends its requests in a single record * fragment, limiting the maximum payload size for stream transports to * 2GB. */ typedef __be32 rpc_fraghdr; #define RPC_LAST_STREAM_FRAGMENT (1U << 31) #define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT) #define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1) /* * RPC call and reply header size as number of 32bit words (verifier * size computed separately, see below) */ #define RPC_CALLHDRSIZE (6) #define RPC_REPHDRSIZE (4) /* * Maximum RPC header size, including authentication, * as number of 32bit words (see RFCs 1831, 1832). * * xid 1 xdr unit = 4 bytes * mtype 1 * rpc_version 1 * program 1 * prog_version 1 * procedure 1 * cred { * flavor 1 * length 1 * body 100 xdr units = 400 bytes * } * verf { * flavor 1 * length 1 * body 100 xdr units = 400 bytes * } * TOTAL 210 xdr units = 840 bytes */ #define RPC_MAX_HEADER_WITH_AUTH \ (RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4)) #define RPC_MAX_REPHEADER_WITH_AUTH \ (RPC_REPHDRSIZE + (2 + RPC_MAX_AUTH_SIZE/4)) /* * Well-known netids. See: * * https://www.iana.org/assignments/rpc-netids/rpc-netids.xhtml */ #define RPCBIND_NETID_UDP "udp" #define RPCBIND_NETID_TCP "tcp" #define RPCBIND_NETID_RDMA "rdma" #define RPCBIND_NETID_SCTP "sctp" #define RPCBIND_NETID_UDP6 "udp6" #define RPCBIND_NETID_TCP6 "tcp6" #define RPCBIND_NETID_RDMA6 "rdma6" #define RPCBIND_NETID_SCTP6 "sctp6" #define RPCBIND_NETID_LOCAL "local" /* * Note that RFC 1833 does not put any size restrictions on the * netid string, but all currently defined netid's fit in 5 bytes. */ #define RPCBIND_MAXNETIDLEN (5u) /* * Universal addresses are introduced in RFC 1833 and further spelled * out in RFC 3530. RPCBIND_MAXUADDRLEN defines a maximum byte length * of a universal address for use in allocating buffers and character * arrays. * * Quoting RFC 3530, section 2.2: * * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the * US-ASCII string: * * h1.h2.h3.h4.p1.p2 * * The prefix, "h1.h2.h3.h4", is the standard textual form for * representing an IPv4 address, which is always four octets long. * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively, * the first through fourth octets each converted to ASCII-decimal. * Assuming big-endian ordering, p1 and p2 are, respectively, the first * and second octets each converted to ASCII-decimal. For example, if a * host, in big-endian order, has an address of 0x0A010307 and there is * a service listening on, in big endian order, port 0x020F (decimal * 527), then the complete universal address is "10.1.3.7.2.15". * * ... * * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the * US-ASCII string: * * x1:x2:x3:x4:x5:x6:x7:x8.p1.p2 * * The suffix "p1.p2" is the service port, and is computed the same way * as with universal addresses for TCP and UDP over IPv4. The prefix, * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for * representing an IPv6 address as defined in Section 2.2 of [RFC2373]. * Additionally, the two alternative forms specified in Section 2.2 of * [RFC2373] are also acceptable. */ #include /* Maximum size of the port number part of a universal address */ #define RPCBIND_MAXUADDRPLEN sizeof(".255.255") /* Maximum size of an IPv4 universal address */ #define RPCBIND_MAXUADDR4LEN \ (INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) /* Maximum size of an IPv6 universal address */ #define RPCBIND_MAXUADDR6LEN \ (INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) /* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */ #define RPCBIND_MAXUADDRLEN RPCBIND_MAXUADDR6LEN #endif /* _LINUX_SUNRPC_MSGPROT_H_ */