// SPDX-License-Identifier: GPL-2.0 /* * xHCI host controller driver * * Copyright (C) 2008 Intel Corp. * * Author: Sarah Sharp * Some code borrowed from the Linux EHCI driver. */ /* HC should halt within 16 ms, but use 32 ms as some hosts take longer */ #define XHCI_MAX_HALT_USEC (32 * 1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0) /* HCCPARAMS offset from PCI base address */ #define XHCI_HCC_PARAMS_OFFSET 0x10 /* HCCPARAMS contains the first extended capability pointer */ #define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff) /* Command and Status registers offset from the Operational Registers address */ #define XHCI_CMD_OFFSET 0x00 #define XHCI_STS_OFFSET 0x04 #define XHCI_MAX_EXT_CAPS 50 /* Capability Register */ /* bits 7:0 - how long is the Capabilities register */ #define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) /* Extended capability register fields */ #define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff) #define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff) #define XHCI_EXT_CAPS_VAL(p) ((p)>>16) /* Extended capability IDs - ID 0 reserved */ #define XHCI_EXT_CAPS_LEGACY 1 #define XHCI_EXT_CAPS_PROTOCOL 2 #define XHCI_EXT_CAPS_PM 3 #define XHCI_EXT_CAPS_VIRT 4 #define XHCI_EXT_CAPS_ROUTE 5 /* IDs 6-9 reserved */ #define XHCI_EXT_CAPS_DEBUG 10 /* Vendor caps */ #define XHCI_EXT_CAPS_VENDOR_INTEL 192 /* USB Legacy Support Capability - section 7.1.1 */ #define XHCI_HC_BIOS_OWNED (1 << 16) #define XHCI_HC_OS_OWNED (1 << 24) /* USB Legacy Support Capability - section 7.1.1 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_SUPPORT_OFFSET (0x00) /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) /* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ #define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) #define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) /* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */ #define XHCI_HLC (1 << 19) #define XHCI_BLC (1 << 20) /* command register values to disable interrupts and halt the HC */ /* start/stop HC execution - do not write unless HC is halted*/ #define XHCI_CMD_RUN (1 << 0) /* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */ #define XHCI_CMD_EIE (1 << 2) /* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */ #define XHCI_CMD_HSEIE (1 << 3) /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ #define XHCI_CMD_EWE (1 << 10) #define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE) /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ #define XHCI_STS_CNR (1 << 11) #include /** * Find the offset of the extended capabilities with capability ID id. * * @base PCI MMIO registers base address. * @start address at which to start looking, (0 or HCC_PARAMS to start at * beginning of list) * @id Extended capability ID to search for, or 0 for the next * capability * * Returns the offset of the next matching extended capability structure. * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL, * and this provides a way to find them all. */ static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id) { u32 val; u32 next; u32 offset; offset = start; if (!start || start == XHCI_HCC_PARAMS_OFFSET) { val = readl(base + XHCI_HCC_PARAMS_OFFSET); if (val == ~0) return 0; offset = XHCI_HCC_EXT_CAPS(val) << 2; if (!offset) return 0; } do { val = readl(base + offset); if (val == ~0) return 0; if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id)) return offset; next = XHCI_EXT_CAPS_NEXT(val); offset += next << 2; } while (next); return 0; }