aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-09-09Linux 5.8.8v5.8.8Greg Kroah-Hartman
Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()Himadri Pandya
commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream. The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09cfg80211: regulatory: reject invalid hintsJohannes Berg
commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream. Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm/khugepaged.c: fix khugepaged's request size in collapse_fileDavid Howells
commit e5a59d308f52bb0052af5790c22173651b187465 upstream. collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to be read to page_cache_sync_readahead(). The intent was probably to read a single page. Fix it to use the number of pages to the end of the window instead. Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yang Shi <shy828301@gmail.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm/hugetlb: fix a race between hugetlb sysctl handlersMuchun Song
commit 17743798d81238ab13050e8e2833699b54e15467 upstream. There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm/hugetlb: try preferred node first when alloc gigantic page from cmaLi Xinhai
commit 953f064aa6b29debcc211869b60bd59f26d19c34 upstream. Since commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma"), the gigantic page would be allocated from node which is not the preferred node, although there are pages available from that node. The reason is that the nid parameter has been ignored in alloc_gigantic_page(). Besides, the __GFP_THISNODE also need be checked if user required to alloc only from the preferred node. After this patch, the preferred node is tried first before other allowed nodes, and don't try to allocate from other nodes if __GFP_THISNODE is specified. If user don't specify the preferred node, the current node will be used as preferred node, which makes sure consistent behavior of allocating gigantic and non-gigantic hugetlb page. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm/migrate: fixup setting UFFD_WP flagAlistair Popple
commit ebdf8321eeeb623aed60f7ed16f7445363230118 upstream. Commit f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration") introduced support for tracking the uffd wp bit during page migration. However the non-swap PTE variant was used to set the flag for zone device private pages which are a type of swap page. This leads to corruption of the swap offset if the original PTE has the uffd_wp flag set. Fixes: f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09checkpatch: fix the usage of capture group ( ... )Mrinal Pandey
commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream. The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09sdhci: tegra: Add missing TMCLK for data timeoutSowjanya Komatineni
commit 8048822bac01936fda2c7b924a52131da81e6198 upstream. commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra SDMMC hawdware for data timeout to achive better timeout than using SDCLK and using TMCLK is recommended. USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or SDCLK for data timeout. Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used for data timeout by Tegra SDMMC hardware and having TMCLK not enabled is not recommended. So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate timeout clock and keeps TMCLK enabled all the time. Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable <stable@vger.kernel.org> # 5.4 Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09kconfig: streamline_config.pl: check defined(ENV variable) before using itRandy Dunlap
commit a73fbfce2cc28883f659414d598e6e60ca2214b4 upstream. A user reported: 'Use of uninitialized value $ENV{"LMC_KEEP"} in split at ./scripts/kconfig/streamline_config.pl line 596.' so first check that $ENV{LMC_KEEP} is defined before trying to use it. Fixes: c027b02d89fd ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09perf record: Correct the help info of option "--no-bpf-event"Wei Li
commit a060c1f12b525ba828f871eff3127dabf8daa1e6 upstream. The help info of option "--no-bpf-event" is wrongly described as "record bpf events", correct it. Committer testing: $ perf record -h bpf Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --clang-opt <clang options> options passed to clang when compiling BPF scriptlets --clang-path <clang path> clang binary to use for compiling BPF scriptlets --no-bpf-event do not record bpf events $ Fixes: 71184c6ab7e6 ("perf record: Replace option --bpf-event with --no-bpf-event") Signed-off-by: Wei Li <liwei391@huawei.com> Acked-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked fileJens Axboe
commit 355afaeb578abac907217c256a844cfafb0337b2 upstream. Actually two things that need fixing up here: - The io_rw_reissue() -EAGAIN retry is explicit to block devices and regular files, so don't ever attempt to do that on other types of files. - If we hit -EAGAIN on a nonblock marked file, don't arm poll handler for it. It should just complete with -EAGAIN. Cc: stable@vger.kernel.org Reported-by: Norman Maurer <norman.maurer@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm/rmap: fixup copying of soft dirty and uffd ptesAlistair Popple
commit ad7df764b7e1c7dc64e016da7ada2e3e1bb90700 upstream. During memory migration a pte is temporarily replaced with a migration swap pte. Some pte bits from the existing mapping such as the soft-dirty and uffd write-protect bits are preserved by copying these to the temporary migration swap pte. However these bits are not stored at the same location for swap and non-swap ptes. Therefore testing these bits requires using the appropriate helper function for the given pte type. Unfortunately several code locations were found where the wrong helper function is being used to test soft_dirty and uffd_wp bits which leads to them getting incorrectly set or cleared during page-migration. Fix these by using the correct tests based on pte type. Fixes: a5430dda8a3a ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm: madvise: fix vma user-after-freeYang Shi
commit 7867fd7cc44e63c6673cd0f8fea155456d34d0de upstream. The syzbot reported the below use-after-free: BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline] BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline] BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996 CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 madvise_willneed mm/madvise.c:293 [inline] madvise_vma mm/madvise.c:942 [inline] do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 do_madvise mm/madvise.c:1169 [inline] __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 9992: kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482 vm_area_alloc+0x1c/0x110 kernel/fork.c:347 mmap_region+0x8e5/0x1780 mm/mmap.c:1743 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 9992: kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693 remove_vma+0x132/0x170 mm/mmap.c:184 remove_vma_list mm/mmap.c:2613 [inline] __do_munmap+0x743/0x1170 mm/mmap.c:2869 do_munmap mm/mmap.c:2877 [inline] mmap_region+0x257/0x1780 mm/mmap.c:1716 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It is because vma is accessed after releasing mmap_lock, but someone else acquired the mmap_lock and the vma is gone. Releasing mmap_lock after accessing vma should fix the problem. Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm: track page table modifications in __apply_to_page_range()Joerg Roedel
commit e80d3909be42f7e38cc350c1ba109cf0aa51956a upstream. __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mm: slub: fix conversion of freelist_corrupted()Eugeniu Rosca
commit dc07a728d49cf025f5da2c31add438d839d076c0 upstream. Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm thin metadata: Fix use-after-free in dm_bm_set_read_onlyYe Bin
commit 3a653b205f29b3f9827a01a0c88bfbcb0d169494 upstream. The following error ocurred when testing disk online/offline: [ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction [ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction [ 301.849206] Aborting journal on device dm-26-8. [ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted [ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30 [ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data] Reason is: metadata_operation_failed abort_transaction dm_pool_abort_metadata __create_persistent_data_objects r = __open_or_format_metadata if (r) --> If failed will free pmd->bm but pmd->bm not set NULL dm_block_manager_destroy(pmd->bm); set_pool_mode dm_pool_metadata_read_only(pool->pmd); dm_bm_set_read_only(pmd->bm); --> use-after-free Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and dm_bm_set_read_write functions. If bm is NULL it means creating the bm failed and so dm_bm_is_read_only must return true. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm thin metadata: Avoid returning cmd->bm wild pointer on errorYe Bin
commit 219403d7e56f9b716ad80ab87db85d29547ee73e upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm cache metadata: Avoid returning cmd->bm wild pointer on errorYe Bin
commit d16ff19e69ab57e08bf908faaacbceaf660249de upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm crypt: Initialize crypto wait structuresDamien Le Moal
commit 7785a9e4c228db6d01086a52d5685cd7336a08b7 upstream. Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm integrity: fix error reporting in bitmap mode after creationMikulas Patocka
commit e27fec66f0a94e35a35548bd0b29ae616e62ec62 upstream. The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm mpath: fix racey management of PG initializationMike Snitzer
commit c322ee9320eaa4013ca3620b1130992916b19b31 upstream. Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by: Ben Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm writecache: handle DAX to partitions on persistent memory correctlyMikulas Patocka
commit f9e040efcc28309e5c592f7e79085a9a52e31f58 upstream. The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09drm/amdgpu: Specify get_argument function for ci_smu_funcsSandeep Raghuraman
commit f7b2e34b4afb8d712913dc199d3292ea9e078637 upstream. Starting in Linux 5.8, the graphics and memory clock frequency were not being reported for CIK cards. This is a regression, since they were reported correctly in Linux 5.7. After investigation, I discovered that the smum_send_msg_to_smc() function, attempts to call the corresponding get_argument() function of ci_smu_funcs. However, the get_argument() function is not defined in ci_smu_funcs. This patch fixes the bug by specifying the correct get_argument() function. Fixes: a0ec225633d9f6 ("drm/amd/powerplay: unified interfaces for message issuing and response checking") Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp settingEvan Quan
commit 971df65cbf32da9bc9af52c1196ca504dd316086 upstream. Normally softwareshutdowntemp should be greater than Thotspotlimit. However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while Thotspotlimit is 105C. This seems not right and may trigger some false alarms. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09drm/i915: Fix sha_text population codeSean Paul
commit 9ab57658a608f879469ffa22b723c4539c05a58f upstream. This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run (cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dmaengine: dw-edma: Fix scatter-gather address calculationGustavo Pimentel
commit 05655541c9503bfd01af4e6cbd7f5a29ac748e6c upstream. Fix the source and destination physical address calculation of a peripheral device on scatter-gather implementation. This issue manifested during tests using a 64 bits architecture system. The abnormal behavior wasn't visible before due to all previous tests were done using 32 bits architecture system, that masked his effect. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/8d3ab7e2ba96563fe3495b32f60077fffb85307d.1597327623.git.gustavo.pimentel@synopsys.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09blk-stat: make q->stats->lock irqsafeTejun Heo
commit e11d80a849e010f78243bb6f6af7dccef3a71a90 upstream. blk-iocost calls blk_stat_enable_accounting() while holding an irqsafe lock which triggers a lockdep splat because q->stats->lock isn't irqsafe. Let's make it irqsafe. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: cd006509b0a9 ("blk-iocost: account for IO size when testing latencies") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09blk-iocost: ioc_pd_free() shouldn't assume irq disabledTejun Heo
commit 5aeac7c4b16069aae49005f0a8d4526baa83341b upstream. ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled when it can be called with irq disabled or enabled. This has a small chance of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations instead. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mips/oprofile: Fix fallthrough placementHe Zhe
commit 91dbd73a1739039fa7e9fe5c0169f2817a7f7670 upstream. We want neither " include/linux/compiler_attributes.h:201:41: warning: statement will never be executed [-Wswitch-unreachable] 201 | # define fallthrough __attribute__((__fallthrough__)) | ^~~~~~~~~~~~~ " nor " include/linux/compiler_attributes.h:201:41: warning: attribute 'fallthrough' not preceding a case label or default label 201 | # define fallthrough __attribute__((__fallthrough__)) | ^~~~~~~~~~~~~ " It's not worth adding one more macro. Let's simply place the fallthrough in between the expansions. Fixes: c9b029903466 ("MIPS: Use fallthrough for arch/mips") Cc: stable@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to SandisksTejun Heo
commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Karthik Shivaram <karthikgs@fb.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09s390: fix GENERIC_LOCKBREAK dependency typo in KconfigEric Farman
commit 114b9df419bf5db097b322ebb03fcf2f502f9380 upstream. Commit fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION") changed a bunch of uses of CONFIG_PREEMPT to _PREEMPTION. Except in the Kconfig it used two T's. That's the only place in the system where that spelling exists, so let's fix that. Fixes: fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION") Cc: <stable@vger.kernel.org> # 5.6 Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09io_uring: fix removing the wrong file in __io_sqe_files_update()Jiufei Xue
commit 98dfd5024a2e9e170b85c07078e2d89f20a5dfbd upstream. Index here is already the position of the file in fixed_file_table, we should not use io_file_from_index() again to get it. Otherwise, the wrong file which still in use may be released unexpectedly. Cc: stable@vger.kernel.org # v5.6 Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09io_uring: set table->files[i] to NULL when io_sqe_file_register failedJiufei Xue
commit 95d1c8e5f801e959a89181a2548a3efa60a1a6ce upstream. While io_sqe_file_register() failed in __io_sqe_files_update(), table->files[i] still point to the original file which may freed soon, and that will trigger use-after-free problems. Cc: stable@vger.kernel.org Fixes: f3bd9dae3708 ("io_uring: fix memleak in __io_sqe_files_update()") Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09block: ensure bdi->io_pages is always initializedJens Axboe
commit de1b0ee490eafdf65fac9eef9925391a8369f2dc upstream. If a driver leaves the limit settings as the defaults, then we don't initialize bdi->io_pages. This means that file systems may need to work around bdi->io_pages == 0, which is somewhat messy. Initialize the default value just like we do for ->ra_pages. Cc: stable@vger.kernel.org Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting") Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09block: allow for_each_bvec to support zero len bvecMing Lei
commit 7e24969022cbd61ddc586f14824fc205661bb124 upstream. Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09affs: fix basic permission bits to actually workMax Staudt
commit d3a84a8d0dde4e26bc084b36ffcbdc5932ac85e2 upstream. The basic permission bits (protection bits in AmigaOS) have been broken in Linux' AFFS - it would only set bits, but never delete them. Also, contrary to the documentation, the Archived bit was not handled. Let's fix this for good, and set the bits such that Linux and classic AmigaOS can coexist in the most peaceful manner. Also, update the documentation to represent the current state of things. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Max Staudt <max@enpas.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09media: rc: uevent sysfs file races with rc_unregister_device()Sean Young
commit 4f0835d6677dc69263f90f976524cb92b257d9f4 upstream. Only report uevent file contents if device still registered, else we might read freed memory. Reported-by: syzbot+ceef16277388d6f24898@syzkaller.appspotmail.com Cc: Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09media: rc: do not access device via sysfs after rc_unregister_device()Sean Young
commit a2e2d73fa28136598e84db9d021091f1b98cbb1a upstream. Device drivers do not expect to have change_protocol or wakeup re-programming to be accesed after rc_unregister_device(). This can cause the device driver to access deallocated resources. Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllersAdrian Hunter
commit df57d73276b863af1debc48546b0e59e44998a55 upstream. For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers. Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset() is called which, for a eMMC that does not support HW Reset, will cycle the bus power and the driver will perform SDHCI_RESET_ALL. So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated. That will force the driver to reinitialize CQHCI when it is next used. A similar change was done already for sdhci-msm, and other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL. Fixes: 8ee82bda230fc9 ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfbd949: mmc: cqhci: Add cqhci_deactivate() Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindingsWenbin Mei
commit 65557383191de46611dd3d6b639cbcfbade43c4a upstream. Add description for resets/reset-names. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200814014346.6496-2-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09mmc: mediatek: add optional module reset propertyWenbin Mei
commit 855d388df217989fbf1f18c781ae6490dbb48e86 upstream. This patch fixs eMMC-Access on mt7622/Bpi-64. Before we got these Errors on mounting eMMC ion R64: [ 48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write This patch adds a optional reset management for msdc. Sometimes the bootloader does not bring msdc register to default state, so need reset the msdc controller. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200814014346.6496-4-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09arm64: dts: mt7622: add reset node for mmc deviceWenbin Mei
commit d6f6cbeee4e5ee6976792851e0461c19f1ede864 upstream. This commit adds reset node for mmc device. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200814014346.6496-3-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th GenTakashi Iwai
commit 6a6660d049f88b89fd9a4b9db3581b245f7782fa upstream. There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716AAdrien Crivelli
commit 8bcea6cb2cbc1f749e574954569323dec5e2920e upstream. The Galaxy Book Ion NT950XCJ-X716A (15 inches) uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug. I confirmed on my own hardware that this fixes the bug. This also correct the model name for the 13 inches version. It was incorrectly referenced as NT950XCJ-X716A in commit e17f02d05. But it should have been NP930XCJ-K01US. Fixes: e17f02d0559c ("ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826084014.211217-1-adrien.crivelli@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA; firewire-tascam: exclude Tascam FE-8 from detectionTakashi Sakamoto
commit 0bd8bce897b6697bbc286b8ba473aa0705fe394b upstream. Tascam FE-8 is known to support communication by asynchronous transaction only. The support can be implemented in userspace application and snd-firewire-ctl-services project has the support. However, ALSA firewire-tascam driver is bound to the model. This commit changes device entries so that the model is excluded. In a commit 53b3ffee7885 ("ALSA: firewire-tascam: change device probing processing"), I addressed to the concern that version field in configuration differs depending on installed firmware. However, as long as I checked, the version number is fixed. It's safe to return version number back to modalias. Fixes: 53b3ffee7885 ("ALSA: firewire-tascam: change device probing processing") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRODan Crawford
commit 15cbff3fbbc631952c346744f862fb294504b5e2 upstream. Following Christian Lachner's patch for Gigabyte X570-based motherboards, also patch the MSI X570-A PRO motherboard; the ALC1220 codec requires the same workaround for Clevo laptops to enforce the DAC/mixer connection path. Set up a quirk entry for that. I suspect most if all X570 motherboards will require similar patches. [ The entries reordered in the SSID order -- tiwai ] Related buglink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Signed-off-by: Dan Crawford <dnlcrwfrd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200829024946.5691-1-dnlcrwfrd@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: firewire-digi00x: exclude Avid Adrenaline from detectionTakashi Sakamoto
commit acd46a6b6de88569654567810acad2b0a0a25cea upstream. Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by: Simon Wood <simon@mungewell.org> Fixes: 9edf723fd858 ("ALSA: firewire-digi00x: add skeleton for Digi 002/003 family") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075545.56305-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: hda/hdmi: always check pin power status in i915 pin fixupKai Vehmanen
commit 858e0ad9301d1270c02b5aca97537d2d6ee9dd68 upstream. When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity checkTakashi Iwai
commit 949a1ebe8cea7b342085cb6a4946b498306b9493 upstream. The PCM OSS mulaw plugin has a check of the format of the counter part whether it's a linear format. The check is with snd_BUG_ON() that emits WARN_ON() when the debug config is set, and it confuses syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for avoiding that. While we're at it, correct the error code to a more suitable, EINVAL. Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>