summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-04-23Linux 5.6.7v5.6.7Greg Kroah-Hartman
2020-04-23x86/xen: fix booting 32-bit pv guestJuergen Gross
commit d6f34f4c6b4a962eb7a86c923fea206f866a40be upstream. Commit 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable") introduced a regression for booting 32 bit Xen PV guests: the address of the initial stack needs to be a virtual one. Fixes: 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23bpf, test_verifier: switch bpf_get_stack's 0 s> r8 testDaniel Borkmann
[ no upstream commit ] Switch the comparison, so that is_branch_taken() will recognize that below branch is never taken: [...] 17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 17: (67) r8 <<= 32 18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...] 18: (c7) r8 s>>= 32 19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 19: (6d) if r1 s> r8 goto pc+16 [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] [...] Currently we check for is_branch_taken() only if either K is source, or source is a scalar value that is const. For upstream it would be good to extend this properly to check whether dst is const and src not. For the sake of the test_verifier, it is probably not needed here: # ./test_verifier 101 #101/p bpf_get_stack return R0 within range OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED I haven't seen this issue in test_progs* though, they are passing fine: # ./test_progs-no_alu32 -t get_stack Switching to flavor 'no_alu32' subdirectory... #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t get_stack #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23bpf: Test_progs, add test to catch retval refine error handlingJohn Fastabend
commit d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream. Before this series the verifier would clamp return bounds of bpf_get_stack() to [0, X] and this led the verifier to believe that a JMP_JSLT 0 would be false and so would prune that path. The result is anything hidden behind that JSLT would be unverified. Add a test to catch this case by hiding an goto pc-1 behind the check which will cause an infinite loop if not rejected. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23bpf: Test_verifier, bpf_get_stack return value add <0John Fastabend
commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream. With current ALU32 subreg handling and retval refine fix from last patches we see an expected failure in test_verifier. With verbose verifier state being printed at each step for clarity we have the following relavent lines [I omit register states that are not necessarily useful to see failure cause], #101/p bpf_get_stack return R0 within range FAIL Failed to load prog 'Success'! [..] 14: (85) call bpf_get_stack#67 R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) R3_w=inv48 15: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 15: (b7) r1 = 0 16: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 16: (bf) r8 = r0 17: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 17: (67) r8 <<= 32 18: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=9223372032559808512, umax_value=18446744069414584320, var_off=(0x0; 0xffffffff00000000), s32_min_value=0, s32_max_value=0, u32_max_value=0, var32_off=(0x0; 0x0)) 18: (c7) r8 s>>= 32 19 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=2147483647, var32_off=(0x0; 0xffffffff)) 19: (cd) if r1 s< r8 goto pc+16 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, var32_off=(0x0; 0xffffffff)) 20: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, R9=inv48 20: (1f) r9 -= r8 21: (bf) r2 = r7 22: R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) 22: (0f) r2 += r8 value -2147483648 makes map_value pointer be out of bounds After call bpf_get_stack() on line 14 and some moves we have at line 16 an r8 bound with max_value 48 but an unknown min value. This is to be expected bpf_get_stack call can only return a max of the input size but is free to return any negative error in the 32-bit register space. The C helper is returning an int so will use lower 32-bits. Lines 17 and 18 clear the top 32 bits with a left/right shift but use ARSH so we still have worst case min bound before line 19 of -2147483648. At this point the signed check 'r1 s< r8' meant to protect the addition on line 22 where dst reg is a map_value pointer may very well return true with a large negative number. Then the final line 22 will detect this as an invalid operation and fail the program. What we want to do is proceed only if r8 is positive non-error. So change 'r1 s< r8' to 'r1 s> r8' so that we jump if r8 is negative. Next we will throw an error because we access past the end of the map value. The map value size is 48 and sizeof(struct test_val) is 48 so we walk off the end of the map value on the second call to get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to 24 by using 'sizeof(struct test_val) / 2'. After this everything passes as expected. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23bpf: fix buggy r0 retval refinement for tracing helpersDaniel Borkmann
[ no upstream commit ] See the glory details in 100605035e15 ("bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly") for why 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") is buggy. The whole series however is not suitable for stable since it adds significant amount [0] of verifier complexity in order to add 32bit subreg tracking. Something simpler is needed. Unfortunately, reverting 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") or just cherry-picking 100605035e15 ("bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since it will break existing tracing programs badly (at least those that are using bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is also not an option since on 4.19 kernels an error will cause a soft-lockup due to hitting dead-code sanitized branch since we don't hard-wire such branches in old kernels yet. But even then for 5.x 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") would cause wrong bounds on the verifier simluation when an error is hit. In one of the earlier iterations of mentioned patch series for upstream there was the concern that just using smax_value in do_refine_retval_range() would nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1] which eventually led to the 32bit subreg tracking in the first place. While I initially went for implementing the idea [1] to pattern match the two shift operations, it turned out to be more complex than actually needed, meaning, we could simply treat do_refine_retval_range() similarly to how we branch off verification for conditionals or under speculation, that is, pushing a new reg state to the stack for later verification. This means, instead of verifying the current path with the ret_reg in [S32MIN, msize_max_value] interval where later bounds would get nuked, we split this into two: i) for the success case where ret_reg can be in [0, msize_max_value], and ii) for the error case with ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds during these shift patterns and can match reg < 0 test. test_progs also succeed with this approach. [0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@john-Precision-5820-Tower/ [1] https://lore.kernel.org/bpf/158015334199.28573.4940395881683556537.stgit@john-XPS-13-9370/T/#m2e0ad1d5949131014748b6daa48a3495e7f0456d Fixes: 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") Reported-by: Lorenzo Fontana <fontanalorenz@gmail.com> Reported-by: Leonardo Di Donato <leodidonato@gmail.com> Reported-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23KEYS: Don't write out to userspace while holding key semaphoreWaiman Long
commit d3ec10aa95819bff18a0d936b18884c7816d0914 upstream. A lockdep circular locking dependency report was seen when running a keyutils test: [12537.027242] ====================================================== [12537.059309] WARNING: possible circular locking dependency detected [12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - - [12537.125253] ------------------------------------------------------ [12537.153189] keyctl/25598 is trying to acquire lock: [12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0 [12537.208365] [12537.208365] but task is already holding lock: [12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12537.270476] [12537.270476] which lock already depends on the new lock. [12537.270476] [12537.307209] [12537.307209] the existing dependency chain (in reverse order) is: [12537.340754] [12537.340754] -> #3 (&type->lock_class){++++}: [12537.367434] down_write+0x4d/0x110 [12537.385202] __key_link_begin+0x87/0x280 [12537.405232] request_key_and_link+0x483/0xf70 [12537.427221] request_key+0x3c/0x80 [12537.444839] dns_query+0x1db/0x5a5 [dns_resolver] [12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.496731] cifs_reconnect+0xe04/0x2500 [cifs] [12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.601045] kthread+0x30c/0x3d0 [12537.617906] ret_from_fork+0x3a/0x50 [12537.636225] [12537.636225] -> #2 (root_key_user.cons_lock){+.+.}: [12537.664525] __mutex_lock+0x105/0x11f0 [12537.683734] request_key_and_link+0x35a/0xf70 [12537.705640] request_key+0x3c/0x80 [12537.723304] dns_query+0x1db/0x5a5 [dns_resolver] [12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.775607] cifs_reconnect+0xe04/0x2500 [cifs] [12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.873477] kthread+0x30c/0x3d0 [12537.890281] ret_from_fork+0x3a/0x50 [12537.908649] [12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}: [12537.935225] __mutex_lock+0x105/0x11f0 [12537.954450] cifs_call_async+0x102/0x7f0 [cifs] [12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs] [12538.000659] cifs_readpages+0x120a/0x1e50 [cifs] [12538.023920] read_pages+0xf5/0x560 [12538.041583] __do_page_cache_readahead+0x41d/0x4b0 [12538.067047] ondemand_readahead+0x44c/0xc10 [12538.092069] filemap_fault+0xec1/0x1830 [12538.111637] __do_fault+0x82/0x260 [12538.129216] do_fault+0x419/0xfb0 [12538.146390] __handle_mm_fault+0x862/0xdf0 [12538.167408] handle_mm_fault+0x154/0x550 [12538.187401] __do_page_fault+0x42f/0xa60 [12538.207395] do_page_fault+0x38/0x5e0 [12538.225777] page_fault+0x1e/0x30 [12538.243010] [12538.243010] -> #0 (&mm->mmap_sem){++++}: [12538.267875] lock_acquire+0x14c/0x420 [12538.286848] __might_fault+0x119/0x1b0 [12538.306006] keyring_read_iterator+0x7e/0x170 [12538.327936] assoc_array_subtree_iterate+0x97/0x280 [12538.352154] keyring_read+0xe9/0x110 [12538.370558] keyctl_read_key+0x1b9/0x220 [12538.391470] do_syscall_64+0xa5/0x4b0 [12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf [12538.435535] [12538.435535] other info that might help us debug this: [12538.435535] [12538.472829] Chain exists of: [12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class [12538.472829] [12538.524820] Possible unsafe locking scenario: [12538.524820] [12538.551431] CPU0 CPU1 [12538.572654] ---- ---- [12538.595865] lock(&type->lock_class); [12538.613737] lock(root_key_user.cons_lock); [12538.644234] lock(&type->lock_class); [12538.672410] lock(&mm->mmap_sem); [12538.687758] [12538.687758] *** DEADLOCK *** [12538.687758] [12538.714455] 1 lock held by keyctl/25598: [12538.732097] #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12538.770573] [12538.770573] stack backtrace: [12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G [12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [12538.881963] Call Trace: [12538.892897] dump_stack+0x9a/0xf0 [12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279 [12538.932891] ? save_trace+0xd6/0x250 [12538.948979] check_prev_add.constprop.32+0xc36/0x14f0 [12538.971643] ? keyring_compare_object+0x104/0x190 [12538.992738] ? check_usage+0x550/0x550 [12539.009845] ? sched_clock+0x5/0x10 [12539.025484] ? sched_clock_cpu+0x18/0x1e0 [12539.043555] __lock_acquire+0x1f12/0x38d0 [12539.061551] ? trace_hardirqs_on+0x10/0x10 [12539.080554] lock_acquire+0x14c/0x420 [12539.100330] ? __might_fault+0xc4/0x1b0 [12539.119079] __might_fault+0x119/0x1b0 [12539.135869] ? __might_fault+0xc4/0x1b0 [12539.153234] keyring_read_iterator+0x7e/0x170 [12539.172787] ? keyring_read+0x110/0x110 [12539.190059] assoc_array_subtree_iterate+0x97/0x280 [12539.211526] keyring_read+0xe9/0x110 [12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0 [12539.249076] keyctl_read_key+0x1b9/0x220 [12539.266660] do_syscall_64+0xa5/0x4b0 [12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf One way to prevent this deadlock scenario from happening is to not allow writing to userspace while holding the key semaphore. Instead, an internal buffer is allocated for getting the keys out from the read method first before copying them out to userspace without holding the lock. That requires taking out the __user modifier from all the relevant read methods as well as additional changes to not use any userspace write helpers. That is, 1) The put_user() call is replaced by a direct copy. 2) The copy_to_user() call is replaced by memcpy(). 3) All the fault handling code is removed. Compiling on a x86-64 system, the size of the rxrpc_read() function is reduced from 3795 bytes to 2384 bytes with this patch. Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23mtd: phram: fix a double free issue in error pathWen Yang
commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream. The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23mtd: lpddr: Fix a double free in probe()Dan Carpenter
commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23docs: Fix path to MTD command line partition parserJonathan Neuschäfer
commit fb2511247dc4061fd122d0195838278a4a0b7b59 upstream. cmdlinepart.c has been moved to drivers/mtd/parsers/. Fixes: a3f12a35c91d ("mtd: parsers: Move CMDLINE parser") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOBFrieder Schrempf
commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream. When writing the bad block marker to the OOB area the access mode should be set to MTD_OPS_RAW as it is done for reading the marker. Currently this only works because req.mode is initialized to MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for req.mode != MTD_OPS_AUTO_OOB. Fix this by explicitly setting req.mode to MTD_OPS_RAW. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23mtd: rawnand: free the nand_device objectChristophe Kerello
commit 009264605cdf1b12962c3a46f75818d05452e890 upstream. This patch releases the resources allocated in nanddev_init function. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23locktorture: Print ratio of acquisitions, not failuresPaul E. McKenney
commit 80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream. The __torture_print_stats() function in locktorture.c carefully initializes local variable "min" to statp[0].n_lock_acquired, but then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail field should normally be zero, and given the initialization, it seems reasonable to display the maximum and minimum number acquisitions instead of miscomputing the maximum and minimum number of failures. This commit therefore switches from failures to acquisitions. And this turns out to be not only a day-zero bug, but entirely my own fault. I hate it when that happens! Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23iio: st_sensors: handle memory allocation failure to fix null pointer ↵Colin Ian King
dereference commit 9960c70949d4356abed8747a20637e0946bb0bad upstream. A null pointer deference on pdata can occur if the allocation of pdata fails. Fix this by adding a null pointer check and handle the -ENOMEM failure in the caller. Addresses-Coverity: ("Dereference null return value") Fixes: 3ce85cc4fbb7 ("iio: st_sensors: get platform data from device tree") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23tty: evh_bytechan: Fix out of bounds accessesStephen Rothwell
commit 3670664b5da555a2a481449b3baafff113b0ac35 upstream. ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23fbmem: Adjust indentation in fb_prepare_logo and fb_blankNathan Chancellor
commit 93166f5f2e4dc593cff8ca77ef828ac6f148b0f3 upstream. Clang warns: ../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] if (fb_logo.depth > 4 && depth > 4) { ^ ../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is here else ^ ../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return ret; ^ ../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is here if (!ret) ^ 2 warnings generated. This warning occurs because there are spaces before the tabs on these lines. Normalize the indentation in these functions so that it is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth") Link: https://github.com/ClangBuiltLinux/linux/issues/825 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23iio: si1133: read 24-bit signed integer for measurementMaxime Roussin-Bélanger
commit 328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream. The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: Simon Goyette <simon.goyette@gmail.com> Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23ARM: dts: sunxi: Fix DE2 clocks register rangeJernej Skrabec
commit da180322582bd9db07f29e6d4a2d170afde0703f upstream. As it can be seen from DE2 manual, clock range is 0x10000. Fix it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline") Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline") Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline") Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3") [wens@csie.org: added fixes tags] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23fbdev: potential information leak in do_fb_ioctl()Dan Carpenter
commit d3d19d6fc5736a798b118971935ce274f7deaa82 upstream. The "fix" struct has a 2 byte hole after ->ywrapstep and the "fix = info->fix;" assignment doesn't necessarily clear it. It depends on the compiler. The solution is just to replace the assignment with an memcpy(). Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Peter Rosin <peda@axentia.se> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23dma-debug: fix displaying of dma allocation typeGrygorii Strashko
commit 9bb50ed7470944238ec8e30a94ef096caf9056ee upstream. The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update type2name string table. This causes incorrect displaying of dma allocation type. Fix it by removing "page" string from type2name string table and switch to use named initializers. Before (dma_alloc_coherent()): k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable After: k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23cifs: ignore cached share root handle closing errorsAurelien Aptel
commit e79b0332ae06b4895dcecddf4bbc5d3917e9383c upstream. Fix tcon use-after-free and NULL ptr deref. Customer system crashes with the following kernel log: [462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR [462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347107] CIFS VFS: Close unmatched open [462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 ... [exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server) #6 [...] smb2_cancelled_close_fid at ... [cifs] #7 [...] process_one_work at ... #8 [...] worker_thread at ... #9 [...] kthread at ... The most likely explanation we have is: * When we put the last reference of a tcon (refcount=0), we close the cached share root handle. * If closing a handle is interrupted, SMB2_close() will queue a SMB2_close() in a work thread. * The queued object keeps a tcon ref so we bump the tcon refcount, jumping from 0 to 1. * We reach the end of cifs_put_tcon(), we free the tcon object despite it now having a refcount of 1. * The queued work now runs, but the tcon, ses & server was freed in the meantime resulting in a crash. THREAD 1 ======== cifs_put_tcon => tcon refcount reach 0 SMB2_tdis close_shroot_lease close_shroot_lease_locked => if cached root has lease && refcount = 0 smb2_close_cached_fid => if cached root valid SMB2_close => retry close in a thread if interrupted smb2_handle_cancelled_close __smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !! INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); queue_work(cifsiod_wq, &cancelled->work) => queue work tconInfoFree(tcon); ==> freed! cifs_put_smb_ses(ses); ==> freed! THREAD 2 (workqueue) ======== smb2_cancelled_close_fid SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time *CRASH* Fixes: d9191319358d ("CIFS: Close cached root handle only if it has a lease") Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23net: dsa: bcm_sf2: Fix overflow checksFlorian Fainelli
commit d0802dc411f469569a537283b6f3833af47aece9 upstream. Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") tried to fix the some user controlled buffer overflows in bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is not representative of what the device actually supports. Correct that by using bcm_sf2_cfp_rule_size() instead. The latter subtracts the number of rules by 1, so change the checks from greater than or equal to greater than accordingly. Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during initBen Skeggs
[ Upstream commit 028a12f5aa829b4ba6ac011530b815eda4960e89 ] Certain boards with GP107/GP108 chipsets hang (often, but randomly) for unknown reasons during GR initialisation. The first tell-tale symptom of this issue is: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ] appearing in dmesg, likely followed by many other failures being logged. Karol found this WAR for the issue a while back, but efforts to isolate the root cause and proper fix have not yielded success so far. I've modified the original patch to include a few more details, limit it to GP107/GP108 by default, and added a config option to override this choice. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23platform/chrome: cros_ec: Query EC protocol version if EC transitions ↵Yicheng Li
between RO/RW [ Upstream commit 42cd0ab476e2daffc23982c37822a78f9a53cdd5 ] RO and RW of EC may have different EC protocol version. If EC transitions between RO and RW, but AP does not reboot (this is true for fingerprint microcontroller / cros_fp, but not true for main ec / cros_ec), the AP still uses the protocol version queried before transition, which can cause problems. In the case of fingerprint microcontroller, this causes AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the interrupt handler, which in turn prevents RO to clear the interrupt line to AP, in an infinite loop. Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there might have been a transition between RO and RW, so re-query the protocol. Signed-off-by: Yicheng Li <yichengli@chromium.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: fix to wait all node page writebackChao Yu
[ Upstream commit dc5a941223edd803f476a153abd950cc3a83c3e1 ] There is a race condition that we may miss to wait for all node pages writeback, fix it. - fsync() - shrink - f2fs_do_sync_file - __write_node_page - set_page_writeback(page#0) : remove DIRTY/TOWRITE flag - f2fs_fsync_node_pages : won't find page #0 as TOWRITE flag was removeD - f2fs_wait_on_node_pages_writeback : wont' wait page #0 writeback as it was not in fsync_node_list list. - f2fs_add_fsync_node_entry Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: fix leaking uninitialized memory in compressed clustersEric Biggers
[ Upstream commit 7fa6d59816e7d81cfd4f854468c477c12b85c789 ] When the compressed data of a cluster doesn't end on a page boundary, the remainder of the last page must be zeroed in order to avoid leaking uninitialized memory to disk. Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/amd: Fix the configuration of GCR3 table root pointerAdrian Huang
[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ] The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'. Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23libnvdimm: Out of bounds read in __nd_ioctl()Dan Carpenter
[ Upstream commit f84afbdd3a9e5e10633695677b95422572f920dc ] The "cmd" comes from the user and it can be up to 255. It it's more than the number of bits in long, it results out of bounds read when we check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is ND_CMD_CALL (10) so I added a compare against that. Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.Jeffery Miller
[ Upstream commit e42fe5b29ac07210297e75f36deefe54edbdbf80 ] The Intel Compute Stick `STK1A32SC` can have a system vendor of "Intel(R) Client Systems". Broaden the Intel Compute Stick DMI checks so that they match "Intel Corporation" as well as "Intel(R) Client Systems". This fixes an issue where the STK1A32SC compute sticks were still exposing a battery with the existing blacklist entry. Signed-off-by: Jeffery Miller <jmiller@neverware.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23csky: Fixup init_fpu compile warning with __initGuo Ren
[ Upstream commit 12879bda3c2a974b7e4fe199a9c21f0c5f6bca04 ] WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the function csky_start_secondary() to the function .init.text:init_fpu() The function csky_start_secondary() references the function __init init_fpu(). This is often because csky_start_secondary lacks a __init annotation or the annotation of init_fpu is wrong. Reported-by: Lu Chongzhi <chongzhi.lcz@alibaba-inc.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23thermal: qoriq: Fix a compiling issueYuantian Tang
[ Upstream commit cbe259fd80b7b02fba0dad79d8fdda8b70a8b963 ] Qoriq thermal driver is used by both PowerPC and ARM architecture. When built for PowerPC architecture, it reports error: undefined reference to `.__devm_regmap_init_mmio_clk' To fix it, select config REGMAP_MMIO. Fixes: 4316237bd627 (thermal: qoriq: Convert driver to use regmap API) Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200303084641.35687-1-andy.tang@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23sunrpc: Fix gss_unwrap_resp_integ() againChuck Lever
[ Upstream commit 4047aa909c4a40fceebc36fff708d465a4d3c6e2 ] xdr_buf_read_mic() tries to find unused contiguous space in a received xdr_buf in order to linearize the checksum for the call to gss_verify_mic. However, the corner cases in this code are numerous and we seem to keep missing them. I've just hit yet another buffer overrun related to it. This overrun is at the end of xdr_buf_read_mic(): 1284 if (buf->tail[0].iov_len != 0) 1285 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len; 1286 else 1287 mic->data = buf->head[0].iov_base + buf->head[0].iov_len; 1288 __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len); 1289 return 0; This logic assumes the transport has set the length of the tail based on the size of the received message. base + len is then supposed to be off the end of the message but still within the actual buffer. In fact, the length of the tail is set by the upper layer when the Call is encoded so that the end of the tail is actually the end of the allocated buffer itself. This causes the logic above to set mic->data to point past the end of the receive buffer. The "mic->data = head" arm of this if statement is no less fragile. As near as I can tell, this has been a problem forever. I'm not sure that minimizing au_rslack recently changed this pathology much. So instead, let's use a more straightforward approach: kmalloc a separate buffer to linearize the checksum. This is similar to how gss_validate() currently works. Coming back to this code, I had some trouble understanding what was going on. So I've cleaned up the variable naming and added a few comments that point back to the XDR definition in RFC 2203 to help guide future spelunkers, including myself. As an added clean up, the functionality that was in xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(), as that is its only caller. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23ext2: fix debug reference to ext2_xattr_cacheJan Kara
[ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ] Fix a debug-only build error in ext2/xattr.c: When building without extra debugging, (and with another patch that uses no_printk() instead of <empty> for the ext2-xattr debug-print macros, this build error happens: ../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’: ../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in this function); did you mean ‘ext2_xattr_list’? atomic_read(&ext2_xattr_cache->c_entry_count)); Fix the problem by removing cached entry count from the debug message since otherwise we'd have to export the mbcache structure just for that. Fixes: be0726d33cb8 ("ext2: convert to mbcache2") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/vt-d: Fix page request descriptor sizeJacob Pan
[ Upstream commit 52355fb1919ef7ed9a38e0f3de6e928de1f57217 ] Intel VT-d might support PRS (Page Reqest Support) when it's running in the scalable mode. Each page request descriptor occupies 32 bytes and is 32-bytes aligned. The page request descriptor offset mask should be 32-bytes aligned. Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()Qian Cai
[ Upstream commit c6f4ebdeba4cff590594df931ff1ee610c426431 ] dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read side critical section but with dmar_global_lock held. Silence this false positive. drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19 Call Trace: dump_stack+0xa4/0xfe lockdep_rcu_suspicious+0xeb/0xf5 dmar_find_atsr+0x1ab/0x1c0 dmar_parse_one_atsr+0x64/0x220 dmar_walk_remapping_entries+0x130/0x380 dmar_table_init+0x166/0x243 intel_iommu_init+0x1ab/0xe19 pci_iommu_init+0x1a/0x44 do_one_initcall+0xae/0x4d0 kernel_init_freeable+0x412/0x4c5 kernel_init+0x19/0x193 Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: skip GC when section is fullJaegeuk Kim
[ Upstream commit 2bac07635ddf9ed59268e61e415d8de9c5eaded7 ] This fixes skipping GC when segment is full in large section. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: fix to account compressed blocks in f2fs_compressed_blocks()Chao Yu
[ Upstream commit 1a67cbe141cf991af252a88143d0fd975be2d9e7 ] por_fsstress reports inconsistent status in orphan inode, the root cause of this is in f2fs_write_raw_pages() we decrease i_compr_blocks incorrectly due to wrong calculation in f2fs_compressed_blocks(). So this patch exposes below two functions based on __f2fs_cluster_blocks: - f2fs_compressed_blocks: get count of compressed blocks in compressed cluster - f2fs_cluster_blocks: get count of valid blocks (including reserved blocks) in compressed cluster. Then use f2fs_compress_blocks() to get correct compressed blocks count in f2fs_write_raw_pages(). sanity_check_inode: inode (ino=ad80) hash inconsistent i_compr_blocks:2, i_blocks:1, run fsck to fix Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23ext2: fix empty body warnings when -Wextra is usedRandy Dunlap
[ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ] When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros to use the no_printk() macro instead of <nothing>. This fixes gcc warnings when -Wextra is used: ../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] I have verified that the only object code change (with gcc 7.5.0) is the reversal of some instructions from 'cmp a,b' to 'cmp b,a'. Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jan Kara <jack@suse.com> Cc: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOMDavid Hildenbrand
[ Upstream commit 5a6b4cc5b7a1892a8d7f63d6cbac6e0ae2a9d031 ] Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities, so this behavior cannot be configured. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Especially, a drop_slab() will result in the whole balloon getting deflated - undesired. While handling it via the OOM handler might not be perfect, it keeps existing behavior. If we want a different behavior, then we need a new feature bit and document it properly (although, there should be a clear use case and the intended effects should be well described). Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a moodule parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Note1: using the OOM handler is frowned upon, but it really is what we need for this feature. Note2: without VIRTIO_BALLOON_F_MUST_TELL_HOST (iow, always with QEMU) we could actually skip sending deflation requests to our hypervisor, making the OOM path *very* simple. Besically freeing pages and updating the balloon. If the communication with the host ever becomes a problem on this call path. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Test report by Tyler Sanderson: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate = total inflate). Without patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds (see attached graph). Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "grep balloon /proc/vmstat" process then, without the patch, the inflation process would never reach the target. Attached [1] is a png of a graph showing the problematic behavior without this patch. It shows deflate-queue activity increasing linearly while balloon size stays constant over the course of more than 8 minutes of the test. [1] https://lore.kernel.org/linux-mm/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com/2-without_patch.png Full test report and discussion [2]: [2] https://lore.kernel.org/r/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com Tested-by: Tyler Sanderson <tysand@google.com> Reported-by: Tyler Sanderson <tysand@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200205163402.42627-4-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsizeOlga Kornievskaia
[ Upstream commit df513a7711712758b9cb1a48d86712e7e1ee03f4 ] Ever since commit 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It used to use au_cslack value which was nice and large and changed it to au_rslack value which turns out to be too small. Since 5.1, v3 mount with sec=krb5p fails against an Ontap server because client's receive buffer it too small. For gss krb5p, we need to account for the mic token in the verifier, and the wrap token in the wrap token. RFC 4121 defines: mic token Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_GetMIC() contain the hex value 04 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3..7 Filler Contains five octets of hex value FF. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last SGN_CKSUM Checksum of the "to-be-signed" data and octet 0..15, as described in section 4.2.4. that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum wrap token Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_Wrap() contain the hex value 05 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3 Filler Contains the hex value FF. 4..5 EC Contains the "extra count" field, in big- endian order as described in section 4.2.3. 6..7 RRC Contains the "right rotation count" in big- endian order, as described in section 4.2.5. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last Data Encrypted data for Wrap tokens with confidentiality, or plaintext data followed by the checksum for Wrap tokens without confidentiality, as described in section 4.2.4. Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum (other things like padding) RFC 3961 defines known cksum sizes: Checksum type sumtype checksum section or value size reference --------------------------------------------------------------------- CRC32 1 4 6.1.3 rsa-md4 2 16 6.1.2 rsa-md4-des 3 24 6.2.5 des-mac 4 16 6.2.7 des-mac-k 5 8 6.2.8 rsa-md4-des-k 6 16 6.2.6 rsa-md5 7 16 6.1.1 rsa-md5-des 8 24 6.2.4 rsa-md5-des3 9 24 ?? sha1 (unkeyed) 10 20 ?? hmac-sha1-des3-kd 12 20 6.3 hmac-sha1-des3 13 20 ?? sha1 (unkeyed) 14 20 ?? hmac-sha1-96-aes128 15 20 [KRB5-AES] hmac-sha1-96-aes256 16 20 [KRB5-AES] [reserved] 0x8003 ? [GSS-KRB5] Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes. (GSS_KRB5_MAX_CKSUM_LEN) Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used for encoding the gss_wrap tokens (same tokens are used in reply). Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/vt-d: Fix mm reference leakJacob Pan
[ Upstream commit 902baf61adf6b187f0a6b789e70d788ea71ff5bc ] Move canonical address check before mmget_not_zero() to avoid mm reference leak. Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/vt-d: Add build dependency on IOASIDJacob Pan
[ Upstream commit 4a663dae47316ae8b97d5b77025fe7dfd9d3487f ] IOASID code is needed by VT-d scalable mode for PASID allocation. Add explicit dependency such that IOASID is built-in whenever Intel IOMMU is enabled. Otherwise, aux domain code will fail when IOMMU is built-in and IOASID is compiled as a module. Fixes: 59a623374dc38 ("iommu/vt-d: Replace Intel specific PASID allocator with IOASID") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23iommu/virtio: Fix freeing of incomplete domainsJean-Philippe Brucker
[ Upstream commit 7062af3ed2ba451029e3733d9f677c68f5ea9e77 ] Calling viommu_domain_free() on a domain that hasn't been finalised (not attached to any device, for example) can currently cause an Oops, because we attempt to call ida_free() on ID 0, which may either be unallocated or used by another domain. Only initialise the vdomain->viommu pointer, which denotes a finalised domain, at the end of a successful viommu_domain_finalise(). Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver") Reported-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23drm/vc4: Fix HDMI mode validationNicolas Saenz Julienne
[ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ] Current mode validation impedes setting up some video modes which should be supported otherwise. Namely 1920x1200@60Hz. Fix this by lowering the minimum HDMI state machine clock to pixel clock ratio allowed. Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23um: falloc.h needs to be directly included for older libcAlan Maguire
[ Upstream commit 35f3401317a3b26aa01fde8facfd320f2628fdcc ] When building UML with glibc 2.17 installed, compilation of arch/um/os-Linux/file.c fails due to failure to find FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions. It appears that /usr/include/bits/fcntl-linux.h (indirectly included by /usr/include/fcntl.h) does not include falloc.h with an older glibc, whereas a more up-to-date version does. Adding the direct include to file.c resolves the issue and does not cause problems for more recent glibc. Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver") Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23mfd: cros_ec: Check DT node for usbpd-notify addPrashant Malani
[ Upstream commit f8db89d14efb770dd59aa0ca74386e5de68310d5 ] Add a check to ensure there is indeed an EC device tree entry before adding the cros-usbpd-notify device. This covers configs where both CONFIG_ACPI and CONFIG_OF are defined, but the EC device is defined using device tree and not in ACPI. Fixes: 4602dce0361e ("mfd: cros_ec: Add cros-usbpd-notify subdevice") Signed-off-by: Prashant Malani <pmalani@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23ceph: re-org copy_file_range and fix some error pathsLuis Henriques
[ Upstream commit 1b0c3b9f91f0df03088d293fc9e62743fd789ad2 ] This patch re-organizes copy_file_range, trying to fix a few issues in the error handling. Here's the summary: - Abort copy if initial do_splice_direct() returns fewer bytes than requested. - Move the 'size' initialization (with i_size_read()) further down in the code, after the initial call to do_splice_direct(). This avoids issues with a possibly stale value if a manual copy is done. - Move the object copy loop into a separate function. This makes it easier to handle errors (e.g, dirtying caps and updating the MDS metadata if only some objects have been copied before an error has occurred). - Added calls to ceph_oloc_destroy() to avoid leaking memory with src_oloc and dst_oloc - After the object copy loop, the new file size to be reported to the MDS (if there's file size change) is now the actual file size, and not the size after an eventual extra manual copy. - Added a few dout() to show the number of bytes copied in the two manual copies and in the object copy loop. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23ACPICA: Fixes for acpiExec namespace init fileBob Moore
[ Upstream commit 9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ] This is the result of squashing the following ACPICA commit ID's: 6803997e5b4f3635cea6610b51ff69e29d251de3 f31cdf8bfda22fe265c1a176d0e33d311c82a7f7 This change fixes several problems with the support for the acpi_exec namespace init file (-fi option). Specifically, it fixes AE_ALREADY_EXISTS errors, as well as various seg faults. Link: https://github.com/acpica/acpica/commit/f31cdf8b Link: https://github.com/acpica/acpica/commit/6803997e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: fix potential deadlock on compressed quota fileChao Yu
[ Upstream commit 466357dc9b5ff555d16b7f9a0ff264eb9d5d908b ] generic/232 reports below deadlock: fsstress D 0 96980 96969 0x00084000 Call Trace: schedule+0x4a/0xb0 io_schedule+0x12/0x40 __lock_page+0x127/0x1d0 pagecache_get_page+0x1d8/0x250 prepare_compress_overwrite+0xe0/0x490 [f2fs] f2fs_prepare_compress_overwrite+0x5d/0x80 [f2fs] f2fs_write_begin+0x833/0xb90 [f2fs] f2fs_quota_write+0x145/0x1e0 [f2fs] write_blk+0x36/0x80 [quota_tree] do_insert_tree+0x2ac/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] qtree_write_dquot+0x70/0x190 [quota_tree] v2_write_dquot+0x43/0x90 [quota_v2] dquot_acquire+0x77/0x100 f2fs_dquot_acquire+0x2f/0x60 [f2fs] dqget+0x310/0x450 dquot_transfer+0xb2/0x120 f2fs_setattr+0x11a/0x4a0 [f2fs] notify_change+0x349/0x480 chown_common+0x168/0x1c0 do_fchownat+0xbc/0xf0 __x64_sys_lchown+0x21/0x30 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 task PC stack pid father kworker/u256:0 D 0 103444 2 0x80084000 Workqueue: writeback wb_workfn (flush-251:1) Call Trace: schedule+0x4a/0xb0 schedule_timeout+0x15e/0x2f0 io_schedule_timeout+0x19/0x40 congestion_wait+0x7e/0x120 f2fs_write_multi_pages+0x12a/0x840 [f2fs] f2fs_write_cache_pages+0x48f/0x790 [f2fs] f2fs_write_data_pages+0x2db/0x330 [f2fs] do_writepages+0x1a/0x60 __writeback_single_inode+0x3d/0x340 writeback_sb_inodes+0x225/0x4a0 wb_writeback+0xf7/0x320 wb_workfn+0xba/0x470 process_one_work+0x16c/0x3f0 worker_thread+0x4c/0x440 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 fsstress D 0 5277 5266 0x00084000 Call Trace: schedule+0x4a/0xb0 rwsem_down_write_slowpath+0x29d/0x540 block_operations+0x105/0x360 [f2fs] f2fs_write_checkpoint+0x101/0x1010 [f2fs] f2fs_sync_fs+0xa8/0x130 [f2fs] f2fs_do_sync_file+0x1ad/0x890 [f2fs] do_fsync+0x38/0x60 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is there is potential deadlock between quota data update and writeback. Kworker Thread B Thread C - f2fs_write_cache_pages - lock whole cluster --- A - f2fs_write_multi_pages - f2fs_write_raw_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_setattr - f2fs_lock_op --- B - f2fs_write_checkpoint - block_operations - f2fs_lock_all --- B - dquot_transfer - f2fs_quota_write - f2fs_prepare_compress_overwrite - pagecache_get_page --- A - f2fs_trylock_op failed --- B - congestion_wait - goto rewrite To fix this issue, during quota file writeback, just redirty all pages left in cluster rather holding pages' lock in cluster and looping retrying lock cp_rwsem. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23f2fs: fix NULL pointer dereference in f2fs_write_begin()Chao Yu
[ Upstream commit 62f63eea291b50a5677ae7503ac128803174698a ] BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs] Call Trace: f2fs_quota_write+0x139/0x1d0 [f2fs] write_blk+0x36/0x80 [quota_tree] get_free_dqblk+0x42/0xa0 [quota_tree] do_insert_tree+0x235/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] qtree_write_dquot+0x70/0x190 [quota_tree] v2_write_dquot+0x43/0x90 [quota_v2] dquot_acquire+0x77/0x100 f2fs_dquot_acquire+0x2f/0x60 [f2fs] dqget+0x310/0x450 dquot_transfer+0x7e/0x120 f2fs_setattr+0x11a/0x4a0 [f2fs] notify_change+0x349/0x480 chown_common+0x168/0x1c0 do_fchownat+0xbc/0xf0 __x64_sys_fchownat+0x20/0x30 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(), so that if quota file is compressed one, we can avoid above NULL pointer dereference when updating quota content. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-23 07:36:33 +0000