aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-05-20Linux 5.4.42v5.4.42Greg Kroah-Hartman
2020-05-20bpf: Test_progs, fix test_get_stack_rawtp_err.c buildKamal Mostafa
The linux-5.4.y commit 8781011a302b ("bpf: Test_progs, add test to catch retval refine error handling") fails to build when libbpf headers are not installed, as it tries to include <bpf/bpf_helpers.h>: progs/test_get_stack_rawtp_err.c:4:10: fatal error: 'bpf/bpf_helpers.h' file not found For 5.4-stable (only) the new test prog needs to include "bpf_helpers.h" instead (like all the rest of progs/*.c do) because 5.4-stable does not carry commit e01a75c15969 ("libbpf: Move bpf_{helpers, helper_defs, endian, tracing}.h into libbpf"). Signed-off-by: Kamal Mostafa <kamal@canonical.com> Fixes: 8781011a302b ("bpf: Test_progs, add test to catch retval refine error handling") Cc: <stable@vger.kernel.org> # v5.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20selftest/bpf: fix backported test_select_reuseport selftest changesAndrii Nakryiko
Fix up RET_IF as CHECK macro to make selftests compile again. Fixes: b911c5e8686a ("selftests: bpf: Reset global state between reuseport test runs") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20libbpf: Extract and generalize CPU mask parsing logicAndrii Nakryiko
commit 6803ee25f0ead1e836808acb14396bb9a9849113 upstream. This logic is re-used for parsing a set of online CPUs. Having it as an isolated piece of code working with input string makes it conveninent to test this logic as well. While refactoring, also improve the robustness of original implementation. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191212013548.1690564-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Makefile: disallow data races on gcc-10 as wellSergei Trofimovich
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mceJim Mattson
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20bpf: Fix sk_psock refcnt leak when receiving messageXiyu Yang
commit 18f02ad19e2c2a1d9e1d55a4e1c0cbf51419151c upstream. tcp_bpf_recvmsg() invokes sk_psock_get(), which returns a reference of the specified sk_psock object to "psock" with increased refcnt. When tcp_bpf_recvmsg() returns, local variable "psock" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of tcp_bpf_recvmsg(). When those error scenarios occur such as "flags" includes MSG_ERRQUEUE, the function forgets to decrease the refcnt increased by sk_psock_get(), causing a refcnt leak. Fix this issue by calling sk_psock_put() or pulling up the error queue read handling when those error scenarios occur. Fixes: e7a5f1f1cd000 ("bpf/sockmap: Read psock ingress_msg before sk_receive_queue") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/1587872115-42805-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20SUNRPC: Revert 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()")Chuck Lever
commit 0a8e7b7d08466b5fc52f8e96070acc116d82a8bb upstream. I've noticed that when krb5i or krb5p security is in use, retransmitted requests are missing the server's duplicate reply cache. The computed checksum on the retransmitted request does not match the cached checksum, resulting in the server performing the retransmitted request again instead of returning the cached reply. The assumptions made when removing xdr_buf_trim() were not correct. In the send paths, the upper layer has already set the segment lengths correctly, and shorting the buffer's content is simply a matter of reducing buf->len. xdr_buf_trim() is the right answer in the receive/unwrap path on both the client and the server. The buffer segment lengths have to be shortened one-by-one. On the server side in particular, head.iov_len needs to be updated correctly to enable nfsd_cache_csum() to work correctly. The simple buf->len computation doesn't do that, and that results in checksumming stale data in the buffer. The problem isn't noticed until there's significant instability of the RPC transport. At that point, the reliability of retransmit detection on the server becomes crucial. Fixes: 241b1f419f0e ("SUNRPC: Remove xdr_buf_trim()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a7740: Add missing extal2 to CPG nodeGeert Uytterhoeven
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodesYoshihiro Shimoda
commit f4d71c6ea9e58c07dd4d02d09c5dd9bb780ec4b1 upstream. Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes. Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a73a4: Add missing CMT1 interruptsGeert Uytterhoeven
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mnAdam Ford
commit 15ddc3e17aec0de4c69d595b873e184432b9791d upstream. Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error. This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the timeout error. Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happyChen-Yu Tsai
commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boardsChen-Yu Tsai
commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: meson-g12-common: fix dwc2 clock namesNeil Armstrong
commit e4f634d812634067b0c661af2e3cecfd629c89b8 upstream. Use the correct dwc2 clock name. Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200326160857.11929-3-narmstrong@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status propertyNeil Armstrong
commit 5ac0869fb39b1c1ba84d4d75c550f82e0bf44c96 upstream. In the process of moving the VIM3 audio nodes to a G12B specific dtsi for enabling the SM1 based VIM3L, the frddr_a status = "okay" property got dropped. This re-enables the frddr_a node to fix audio support. Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20clk: Unlink clock if failed to prepare or enableMarc Zyngier
commit 018d4671b9bbd4a5c55cf6eab3e1dbc70a50b66e upstream. On failing to prepare or enable a clock, remove the core structure from the list it has been inserted as it is about to be freed. This otherwise leads to random crashes when subsequent clocks get registered, during which parsing of the clock tree becomes adventurous. Observed with QEMU's RPi-3 emulation. Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Revert "ALSA: hda/realtek: Fix pop noise on ALC225"Kai-Heng Feng
commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream. This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in cdc_bind()Wei Yongjun
commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in gncm_bind()Wei Yongjun
commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: audio: Fix a missing error return value in audio_bind()Christophe JAILLET
commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream. If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0. Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: net2272: Fix a memory leak in an error handling path in ↵Christophe JAILLET
'net2272_plat_probe()' commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream. 'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error handling path, as already done in the remove function (i.e. 'net2272_plat_remove()') Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20fanotify: fix merging marks masks with FAN_ONDIRAmir Goldstein
commit 55bf882c7f13dda8bbe624040c6d5b4fbb812d16 upstream. Change the logic of FAN_ONDIR in two ways that are similar to the logic of FAN_EVENT_ON_CHILD, that was fixed in commit 54a307ba8d3c ("fanotify: fix logic of events on child"): 1. The flag is meaningless in ignore mask 2. The flag refers only to events in the mask of the mark where it is set This is what the fanotify_mark.2 man page says about FAN_ONDIR: "Without this flag, only events for files are created." It doesn't say anything about setting this flag in ignore mask to stop getting events on directories nor can I think of any setup where this capability would be useful. Currently, when marks masks are merged, the FAN_ONDIR flag set in one mark affects the events that are set in another mark's mask and this behavior causes unexpected results. For example, a user adds a mark on a directory with mask FAN_ATTRIB | FAN_ONDIR and a mount mark with mask FAN_OPEN (without FAN_ONDIR). An opendir() of that directory (which is inside that mount) generates a FAN_OPEN event even though neither of the marks requested to get open events on directories. Link: https://lore.kernel.org/r/20200319151022.31456-10-amir73il@gmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Cc: Rachel Sibley <rasibley@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()John Stultz
commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream. The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg() causes us to break out of the loop before we call dwc3_gadget_ep_reclaim_completed_trb(), which is what likely should be clearing the HWO flag. This can cause odd behavior where we never reclaim all the trbs in the sg list, so we never call giveback on a usb req, and that will causes transfer stalls. This effectively resovles the adb stalls seen on HiKey960 after userland changes started only using AIO in adbd. Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Josh Gao <jmgao@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org #4.20+ Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocksJustin Swartz
commit cec9d101d70a3509da9bd2e601e0b242154ce616 upstream. The following changes prevent the unrecoverable freezes and rcu_sched stall warnings experienced in each of my attempts to take advantage of lima. Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a COMPOSITE that retains the selection of HDMIPHY as the PLL source, but instead makes uses of the aclk_gpu PLL source gate and parent names defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p. Remove the now unused mux_aclk_gpu_pre_p and the four named but also unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu) of the aclk_gpu PLL source gate. Use the correct gate offset for aclk_gpu and aclk_gpu_noc. Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Cc: stable@vger.kernel.org Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> [double-checked against SoC manual and added fixes tag] Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20exec: Move would_dump into flush_old_execEric W. Biederman
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/unwind/orc: Fix error handling in __unwind_start()Josh Poimboeuf
commit 71c95825289f585014fe9741b051d32a7a916680 upstream. The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86: Fix early boot crash on gcc-10, third tryBorislav Petkov
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20cifs: fix leaked reference on requeued writeAdam McCoy
commit a48137996063d22ffba77e077425f49873856ca5 upstream. Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by: Adam McCoy <adam@forsedomani.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUGChristophe Leroy
commit 4833ce06e6855d526234618b746ffb71d6612c9a upstream. gpr2 is not a parametre of kuap_check(), it doesn't exist. Use gpr instead. Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ea599546f2a7771bde551393889e44e6b2632332.1587368807.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20drm/amd/display: add basic atomic check for cursor planeSimon Ser
commit 626bf90fe03fa080d8df06bb0397c95c53ae8e27 upstream. This patch adds a basic cursor check when an atomic test-only commit is performed. The position and size of the cursor plane is checked. This should fix user-space relying on atomic checks to assign buffers to planes. Signed-off-by: Simon Ser <contact@emersion.fr> Reported-by: Roman Gilg <subdiff@gmail.com> References: https://github.com/emersion/libliftoff/issues/46 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connectionMichal Vokáč
commit cbe63a8358310244e6007398bd2c7c70c7fd51cd upstream. The Y Soft yapp4 platform supports up to two Ethernet ports. The Ursa board though has only one Ethernet port populated and that is the port@2. Since the introduction of this platform into mainline a wrong port was deleted and the Ethernet could never work. Fix this by deleting the correct port node. Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Cc: stable@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entriesFabio Estevam
commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream. The I2C2 pins are already used and the following errors are seen: imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back imx-i2c: probe of 1001d000.i2c failed with error -22 Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group. Cc: <stable@vger.kernel.org> Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: dra7: Fix bus_dma_limit for PCIeKishon Vijay Abraham I
commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream. Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller gets incorrect value of bus_dma_limit. Fix it by adding empty dma-ranges property to axi@0 and axi@1 (parent device tree node of PCIe controller). Cc: stable@kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()Peter Jones
commit 82152d424b6cb6fc1ede7d03d69c04e786688740 upstream. This was sort of annoying me: random:~$ dmesg | tail -1 [523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. random:~$ dmesg | grep -c "Reducing the compressed" 47 This patch makes it DRM_INFO_ONCE() just like the similar message farther down in that function is pr_info_once(). Cc: stable@vger.kernel.org Signed-off-by: Peter Jones <pjones@redhat.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745 Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com [vsyrjala: Rebase due to per-device logging] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce) [Rodrigo: port back to DRM_INFO_ONCE] Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg listSriharsha Allenki
commit 3c6f8cb92c9178fc0c66b580ea3df1fa3ac1155a upstream. On platforms with IOMMU enabled, multiple SGs can be coalesced into one by the IOMMU driver. In that case the SG list processing as part of the completion of a urb on a bulk endpoint can result into a NULL pointer dereference with the below stack dump. <6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c <6> pgd = c0004000 <6> [0000000c] *pgd=00000000 <6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM <2> PC is at xhci_queue_bulk_tx+0x454/0x80c <2> LR is at xhci_queue_bulk_tx+0x44c/0x80c <2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3 <2> sp : ca337c80 ip : 00000000 fp : ffffffff <2> r10: 00000000 r9 : 50037000 r8 : 00004000 <2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000 <2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000 <2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none <2> Control: 10c0383d Table: b412c06a DAC: 00000051 <6> Process usb-storage (pid: 5961, stack limit = 0xca336210) <snip> <2> [<c08907c4>] (xhci_queue_bulk_tx) <2> [<c0881b3c>] (xhci_urb_enqueue) <2> [<c0831068>] (usb_hcd_submit_urb) <2> [<c08350b4>] (usb_sg_wait) <2> [<c089f384>] (usb_stor_bulk_transfer_sglist) <2> [<c089f2c0>] (usb_stor_bulk_srb) <2> [<c089fe38>] (usb_stor_Bulk_transport) <2> [<c089f468>] (usb_stor_invoke_transport) <2> [<c08a11b4>] (usb_stor_control_thread) <2> [<c014a534>] (kthread) The above NULL pointer dereference is the result of block_len and the sent_len set to zero after the first SG of the list when IOMMU driver is enabled. Because of this the loop of processing the SGs has run more than num_sgs which resulted in a sg_next on the last SG of the list which has SG_END set. Fix this by check for the sg before any attributes of the sg are accessed. [modified reason for null pointer dereference in commit message subject -Mathias] Fixes: f9c589e142d04 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20USB: gadget: fix illegal array access in binding with UDCKyungtae Kim
commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream. FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Kyungtae Kim <kt0755@gmail.com> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: cdns3: gadget: prev_req->trb is NULL for ep0Peter Chen
commit 95cd7dc47abd71d1a0c9c43594ff2fa32552f46c upstream. And there are no multiple TRBs on EP0 and WA1 workaround, so it doesn't need to change TRB for EP0. It fixes below oops. configfs-gadget gadget: high-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED Unable to handle kernel read from unreadable memory at virtual address 0000000000000008 Mem abort info: android_work: sent uevent USB_STATE=DISCONNECTED ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b5bb7000 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 430 Comm: HwBinder:401_1 Not tainted 5.4.24-06071-g6fa8921409c1-dirty #77 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 60400085 (nZCv daIf +PAN -UAO) pc : cdns3_gadget_ep_dequeue+0x1d4/0x270 lr : cdns3_gadget_ep_dequeue+0x48/0x270 sp : ffff800012763ba0 x29: ffff800012763ba0 x28: ffff00082c653c00 x27: 0000000000000000 x26: ffff000068fa7b00 x25: ffff0000699b2000 x24: ffff00082c6ac000 x23: ffff000834f0a480 x22: ffff000834e87b9c x21: 0000000000000000 x20: ffff000834e87800 x19: ffff000069eddc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fbe8 x10: 0000000000000001 x9 : ffff800012101558 x8 : 0000000000000001 x7 : 0000000000000006 x6 : ffff000835d9c668 x5 : ffff000834f0a4c8 x4 : 0000000096000000 x3 : 0000000000001810 x2 : 0000000000000000 x1 : ffff800024bd001c x0 : 0000000000000001 Call trace: cdns3_gadget_ep_dequeue+0x1d4/0x270 usb_ep_dequeue+0x34/0xf8 composite_dev_cleanup+0x154/0x170 configfs_composite_unbind+0x6c/0xa8 usb_gadget_remove_driver+0x44/0x70 usb_gadget_unregister_driver+0x74/0xe0 unregister_gadget+0x28/0x58 gadget_dev_desc_UDC_store+0x80/0x110 configfs_write_file+0x1e0/0x2a0 __vfs_write+0x48/0x90 vfs_write+0xe4/0x1c8 ksys_write+0x78/0x100 __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.0+0x74/0x168 el0_svc_handler+0x34/0xa0 el0_svc+0x8/0xc Code: 52830203 b9407660 f94042e4 11000400 (b9400841) ---[ end trace 1574516e4c1772ca ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds.. Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: host: xhci-plat: keep runtime active when removing hostLi Jun
commit 1449cb2c2253d37d998c3714aa9b95416d16d379 upstream. While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by: Peter Chen <peter.chen@nxp.com> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534BEugeniu Rosca
commit 76e1ef1d81a4129d7e2fb8c48c83b166d1c8e040 upstream. On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]: > This patch prevents my Raven Ridge xHCI from getting runtime suspend. The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") applies solely to the USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board, manufactured by Shimafuji Electric Inc [3]. Despite that, the aforementioned commit applied the quirk to _all_ hubs carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than initially expected. Consequently, the quirk is now enabled on platforms carrying SMSC/Microchip hub models which potentially don't exhibit the original issue. To avoid reports like [1], further limit the quirk's scope to USB5534B [2], by employing both Vendor and Product ID checks. Tested on H3ULCB + Kingfisher rev. M05. [1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/ [2] https://www.microchip.com/wwwproducts/en/USB5534B [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org # v4.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hardik Gajjar <hgajjar@de.adit-jv.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headsetJesus Ramos
commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream. Kingston HyperX headset with 0951:16ad also needs the same quirk for delaying the frequency controls. Signed-off-by: Jesus Ramos <jesus-ramos@live.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: rawmidi: Fix racy buffer resize under concurrent accessesTakashi Iwai
commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream. The rawmidi core allows user to resize the runtime buffer via ioctl, and this may lead to UAF when performed during concurrent reads or writes: the read/write functions unlock the runtime lock temporarily during copying form/to user-space, and that's the race window. This patch fixes the hole by introducing a reference counter for the runtime buffer read/write access and returns -EBUSY error when the resize is performed concurrently against read/write. Note that the ref count field is a simple integer instead of refcount_t here, since the all contexts accessing the buffer is basically protected with a spinlock, hence we need no expensive atomic ops. Also, note that this busy check is needed only against read / write functions, and not in receive/transmit callbacks; the race can happen only at the spinlock hole mentioned in the above, while the whole function is protected for receive / transmit callbacks. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DATakashi Iwai
commit 1b94e59d30afecf18254ad413e953e7587645a20 upstream. ASUS ZenBook UX431DA requires an additional COEF setup when booted from the recent Windows 10, otherwise it produces the noisy output. The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly due to the pop noise reduction. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ALSA: hda/realtek - Limit int mic boost for Thinkpad T530Takashi Iwai
commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream. Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20USB: usbfs: fix mmap dma mismatchGreg Kroah-Hartman
commit a0e710a7def471b8eb779ff551fc27701da49599 upstream. In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch") we switched from always calling remap_pfn_range() to call dma_mmap_coherent() to handle issues with systems with non-coherent USB host controller drivers. Unfortunatly, as syzbot quickly told us, not all the world is host controllers with DMA support, so we need to check what host controller we are attempting to talk to before doing this type of allocation. Thanks to Christoph for the quick idea of how to fix this. Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch") Cc: Christoph Hellwig <hch@lst.de> Cc: Hillf Danton <hdanton@sina.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: usbfs: correct kernel->user page attribute mismatchJeremy Linton
commit 2bef9aed6f0e22391c8d4570749b1acc9bc3981e upstream. On some architectures (e.g. arm64) requests for IO coherent memory may use non-cachable attributes if the relevant device isn't cache coherent. If these pages are then remapped into userspace as cacheable, they may not be coherent with the non-cacheable mappings. In particular this happens with libusb, when it attempts to create zero-copy buffers for use by rtl-sdr (https://github.com/osmocom/rtl-sdr/). On low end arm devices with non-coherent USB ports, the application will be unexpectedly killed, while continuing to work fine on arm machines with coherent USB controllers. This bug has been discovered/reported a few times over the last few years. In the case of rtl-sdr a compile time option to enable/disable zero copy was implemented to work around it. Rather than relaying on application specific workarounds, dma_mmap_coherent() can be used instead of remap_pfn_range(). The page cache/etc attributes will then be correctly set in userspace to match the kernel mapping. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: avoid shadowing standard library 'free()' in cryptoLinus Torvalds
commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream. gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: mark more functions __init to avoid section mismatch warningsLinus Torvalds
commit e99332e7b4cda6e60f5b5916cf9943a79dbef902 upstream. It seems that for whatever reason, gcc-10 ends up not inlining a couple of functions that used to be inlined before. Even if they only have one single callsite - it looks like gcc may have decided that the code was unlikely, and not worth inlining. The code generation difference is harmless, but caused a few new section mismatch errors, since the (now no longer inlined) function wasn't in the __init section, but called other init functions: Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap() So add the appropriate __init annotation to make modpost not complain. In both cases there were trivially just a single callsite from another __init function. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10 warnings: fix low-hanging fruitLinus Torvalds
commit 9d82973e032e246ff5663c9805fbb5407ae932e3 upstream. Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20gcc-10: disable 'restrict' warning for nowLinus Torvalds
commit adc71920969870dfa54e8f40dac8616284832d02 upstream. gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>