| Age | Commit message (Collapse) | Author |
|---|
|
commit a284e11c371e446371675668d8c8120a27227339 upstream.
This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.
The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.
I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.
It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.
With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86bcd3a12999447faad60ec59c2d64d18d8e61ac upstream.
F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.
The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.
Fixes: 363c53875aef (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc1156f373e3927e0dcf06678906c367588bfdd6 upstream.
Some Lenovo X1 Carbon Gen 6 laptops report LEN0091. Add this
to the smbus_pnp_ids list.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191119105118.54285-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e190de6941db14813032af87873f5550ad5764fe upstream.
Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4cc8d6505ab82db3357613d36e6c58a297f57f7c upstream.
syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.
Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.
Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1e8c1fdce8b00fce08784d9d738c60ebf598ebc upstream.
headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.
Fixes: 4344aec84bd8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a70608 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 695d1ec3994f9de2cefae80ee2087c95d2e5a2f3 upstream.
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
BugLink: https://bugs.launchpad.net/bugs/1846148
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121025427.8856-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 436e25505f3458cc92c7f3c985e9cbc198a98209 upstream.
Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.
Fixes: 60083f9e94b2 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb59bd17d2fa6e5e84fba61a5ebdea984222e6d5 upstream.
If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.
Create a helper to validate the attributes. This now does two things:
- check the file mode
- check if the file size fits in i_size without overflowing
Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba45457e ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c634da718db9b2fac201df2ae1b1b095344ce5eb upstream.
When adding a new hard link, make sure that i_nlink doesn't overflow.
Fixes: ac45d61357e8 ("fuse: fix nlink after unlink")
Cc: <stable@vger.kernel.org> # v3.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ratio precision
commit 4929a4e6faa0f13289a67cae98139e727f0d4a97 upstream.
The quota/period ratio is used to ensure a child task group won't get
more bandwidth than the parent task group, and is calculated as:
normalized_cfs_quota() = [(quota_us << 20) / period_us]
If the quota/period ratio was changed during this scaling due to
precision loss, it will cause inconsistency between parent and child
task groups.
See below example:
A userspace container manager (kubelet) does three operations:
1) Create a parent cgroup, set quota to 1,000us and period to 10,000us.
2) Create a few children cgroups.
3) Set quota to 1,000us and period to 10,000us on a child cgroup.
These operations are expected to succeed. However, if the scaling of
147/128 happens before step 3, quota and period of the parent cgroup
will be changed:
new_quota: 1148437ns, 1148us
new_period: 11484375ns, 11484us
And when step 3 comes in, the ratio of the child cgroup will be
104857, which will be larger than the parent cgroup ratio (104821),
and will fail.
Scaling them by a factor of 2 will fix the problem.
Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Phil Auld <pauld@redhat.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: 2e8e19226398 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Link: https://lkml.kernel.org/r/20191004001243.140897-1-xueweiz@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 474fb1150d40780e71f0b569aeac4f375df3af3d ]
Set RSS indirection table and RSS hash key sizes to their real size.
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e159b6074c82fe31b79aad672e02fa204dbbc6d8 ]
If link is disabled, media_entity_remote_pad returns NULL, causing a
NULL pointer deference.
Ignore links that are not enabled instead.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5760367298a37c459ef0b1364463d70fd9a1f972 ]
When a micro SD card is inserted in the PDU001 card cage, the card
detection switch is opened and the corresponding GPIO input is driven
by a pull-up. Hence change the active level of the card detection
input from low to high.
Signed-off-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5719ac19fc32d892434939c1756c2f9a8322e6ef ]
"arm,cortex-a15-pmu" is not a valid fallback compatible string for an
Cortex-A7 PMU, so drop it.
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29f58ff06795a923407d011d4721eaf3e8d39acc ]
Implement set_bias_level to drive shutdown bit, so device is
put to sleep when unused.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecda0a09fa9933bcd67e33c952f778f0872392ed ]
The driver tries to figure out which state a SD clock is in when the
clock is registered, instead of setting a known state. This can be
problematic for two reasons.
1. If the clock driver can't figure out the state of the clock,
registration of the clock fails, and setting of a known state by a
clock user is not possible.
2. The state of the clock depends on if and how the bootloader
configured it. The driver only checks that the rate is known, not if
the clock is stopped or not for example.
Fix this by setting a known state and making sure the clock is stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f770e3bc236ee954a3b4052bdf55739e26ee25db ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/usb/mtu3/mtu3_qmu.c: In function 'qmu_tx_zlp_error_handler':
drivers/usb/mtu3/mtu3_qmu.c:385:22: warning:
variable 'req' set but not used [-Wunused-but-set-variable]
It seems dbginfo original intention is print 'req' other than 'mreq'
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fbc9b8b4ea3f688a5da141a64f97aa33ad02ae9 ]
This fixes a compilation warning in sysfs.c
drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be
truncated copying 8 bytes from a string of length 31
[-Wstringop-truncation]
By eliminating the temporary stack buffer.
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18912c4524385dd6532c682cb9d4f6aa39ba8d47 ]
The call to sdma_progress() is called outside the wait lock.
In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle. If that happens, there will be no
more sdma interrupts to cause the wakeup and the vnic_sdma xmit will hang.
Fix by moving the lock to enclose the sdma_progress() call.
Also, delete the tx_retry. The need for this was removed by:
commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first")
Fixes: 64551ede6cd1 ("IB/hfi1: VNIC SDMA support")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1a797c0818e0122c7ec8422edd971cfec9b15ea ]
When it is requested to change its physical state back to Offline while in
the process to go up, DC8051 will set the ERROR field in the
DC8051_DBG_ERR_INFO_SET_BY_8051 register. This ERROR field will remain
until the next time when DC8051 transitions from Offline to Polling.
Subsequently, when the host requests DC8051 to change its physical state
to Polling again, it may receive a DC8051 interrupt with the stale ERROR
field still in DC8051_DBG_ERR_INFO_SET_BY_8051. If the host link state has
been changed to Polling, this stale ERROR will force the host to
transition to Offline state, resulting in a vicious cycle of Polling
->Offline->Polling->Offline. On the other hand, if the host link state is
still Offline when the stale ERROR is received, the stale ERROR will be
ignored, and the link will come up correctly. This patch implements the
correct behavior by changing host link state to Polling only after DC8051
changes its physical state to Polling.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da93d2913fdf43d5cde3c5a53ac9cc29684d5c7c ]
GRE decap offload is configured when local routes prefix correspond to the
local address of one of the offloaded GRE tunnels. The matching check was
found to be too strict, such that for a flat GRE configuration, in which
the overlay and underlay traffic share the same non-default VRF, decap flow
was not offloaded.
Relax the check for decap flow offloading. A match occurs if the local
address of the tunnel matches the local route address while both share the
same VRF table.
Fixes: 4607f6d26950 ("mlxsw: spectrum_router: Support IPv4 underlay decap")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0d7fbf8b174168c580bb310964c3c809e5569a9 ]
The workaround for the wrong hierarchy of the 3DG-{A,B} power
domains on R-Car E3 ES1.0 corrected the parent domains.
However, the 3DG-{A,B} power domains were still initialized and powered
in the wrong order, causing 3DG operation to fail.
Fix this by changing the order in the table at runtime, when running on
an affected SoC.
Fixes: 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afd0a8006e98b1890908f81746c94ca5dae29d7c ]
If for some reason an association's fragmentation point is zero,
sctp_datamsg_from_user will try to endlessly try to divide a message
into zero-sized chunks. This eventually causes kernel panic due to
running out of memory.
Although this situation is quite unlikely, it has occurred before as
reported. I propose to add this simple last-ditch sanity check due to
the severity of the potential consequences.
Signed-off-by: Jakub Audykowicz <jakub.audykowicz@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2abf856202fd3e4883e4c518acaa9a023b0dbe54 ]
Drop the halt check of the UFS symbol clocks, in accordance with other
platforms. This makes clk_disable_unused() happy and makes it possible
to turn the clocks on again without an error.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16ad9501b1f2edebe24f8cf3c09da0695871986b ]
This fixes the case when CONFIG_QCOM_SCM is not enabled, and linux/errno.h
has not been included previously.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c28b91380dd1183347d32d87d820818031ebecf ]
usb_control_msg returns in case of a successfully sent message the number
of sent bytes as a positive number. Don't use this value as a return value
for stk_camera_read_reg, as a non-zero return value is used as an error
condition in some cases when stk_camera_read_reg is called.
Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c96cf923a98d1b094df9f0cf97a83e118817e31b ]
There might be situations where tty_ldisc_lock() has blocked, but there
is already IO on tty and it prevents line discipline changes.
It might theoretically turn into dead-lock.
Basically, provide more priority to pending tty_ldisc_lock() than to
servicing reads/writes over tty.
User-visible issue was reported by Mikulas where on pa-risc with
Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper
locking in tty_reopen().
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 925c5afd78c40169c7e0e6adec52d5119ff43751 ]
Unlike in previous generations, the system-control register range is not
limited to a size of 0x30 on the H3. In particular, the EMAC clock
configuration register (accessed through syscon) is at offset 0x30 in
that range.
Extend the register size to its full range (0x1000) as a result.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1fee899e5bed457afc20a6a2ff3915a95cc5942 ]
Transfers were being divided into device FIFO sized (64 byte max)
operations which would poll for completion within a spin_lock_irqsave /
spin_unlock_irqrestore block. This both made things slow by waiting for
the FIFO to completely drain before adding further data and would also
result in softlocks on large transmissions.
This patch allows larger transfers with continuous FIFO additions as
space becomes available and removes polling from the interrupt handler.
Signed-off-by: Ryan Case <ryandcase@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ece41454c6a5ed8f301ef1c37710ab222e577823 ]
The streaming object is a key part of handling the UVC device. Although
not critical, we are currently missing a call to destroy the mutex on
clean up paths, and we are due to extend the objects complexity in the
near future.
Facilitate easy management of a stream object by creating a pair of
functions to handle creating and destroying the allocation. The new
uvc_stream_delete() function also performs the missing mutex_destroy()
operation.
Previously a failed streaming object allocation would cause
uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the
constructor failes, we will instead return -ENOMEM.
While we're here, fix the trivial spelling error in the function banner
of uvc_delete().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 255fbca65137e25b12bced18ec9a014dc77ecda0 ]
As the man(2) page for utime/utimes states, EPERM is returned when the
second parameter of utime or utimes is not NULL, the caller's effective UID
does not match the owner of the file, and the caller is not privileged.
However, in a NFS directory mounted from knfsd, it will return EACCES
(from nfsd_setattr-> fh_verify->nfsd_permission). This patch fixes
that.
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c6121c39677175bd372076020948e184bad4b6b ]
cn58xx is compatible with cn50xx, so use the latter.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[paul.burton@mips.com: s/cn52xx/cn50xx/ in commit message.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 515b2915ee08060ad4f6a3b3de38c5c2c5258e8b ]
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock
of the DU module clocks on R-Car D3 is S1D1.
Fixes: d71e851d82c6cfe5 ("clk: renesas: cpg-mssr: Add R8A77995 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cf3a216a2b3a672cad3e498c186c9333bdff90a ]
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock
of the DU module clocks on R-Car E3 is S1D1.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Fixes: 3570a2af473789c5 ("clk: renesas: cpg-mssr: Add support for R-Car E3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b682c8692442711684befe413cf93cf01c5324ea ]
The add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros originate
from GCC's longlong.h which in turn was copied from GMP's longlong.h a
few decades ago.
This was found when compiling with clang:
arch/powerpc/math-emu/fnmsub.c:46:2: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions
FP_ADD_D(R, T, B);
^~~~~~~~~~~~~~~~~
...
./arch/powerpc/include/asm/sfp-machine.h:283:27: note: expanded from
macro 'sub_ddmmss'
: "=r" ((USItype)(sh)), \
~~~~~~~~~~^~~
Segher points out: this was fixed in GCC over 16 years ago
( https://gcc.gnu.org/r56600 ), and in GMP (where it comes from)
presumably before that.
Update the add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros to
the latest GCC version in order to git rid of the invalid casts. These
were taken as-is from GCC's longlong in order to make future syncs
obvious. Other parts of sfp-machine.h were left as-is as the file
contains more features than present in longlong.h.
Link: https://github.com/ClangBuiltLinux/linux/issues/260
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8665569e97dd52920713b95675409648986b5b0d ]
Given corruption in the ftrace records, it might be possible to allocate
tmp_prz without assigning prz to it, but still marking it as needing to
be freed, which would cause at least a NULL dereference.
smatch warnings:
fs/pstore/ram.c:340 ramoops_pstore_read() error: we previously assumed 'prz' could be null (see line 255)
https://lists.01.org/pipermail/kbuild-all/2018-December/055528.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 2fbea82bbb89 ("pstore: Merge per-CPU ftrace records into one")
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95aac2cdafd8c8298c9b2589c52f44db0d824e0e ]
Functions __set_port_type and mlx4_check_port_params returned
-EINVAL while the proper return code is -EOPNOTSUPP as a
result of an unsupported operation. All drivers should generate
this and all users should check for it when detecting an
unsupported functionality.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3595c559326d0b660bb088a88e22e0ca630a0e35 ]
The warning added in commit 3b0e761ba83
"dlm: print log message when cluster name is not set"
did not account for the fact that lockspaces created
from userland do not supply a cluster name, so bogus
warnings are printed every time a userland lockspace
is created.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3b2f758ec1e6cdb13c925647cbd8ad4938b78fb ]
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 458ffce1cb46e46e3cec48b625ed142250475708 ]
When dvb_attach fails, probe returns 0, and remove crashes afterwards.
This patch sets the return value to -ENODEV when attach fails.
Fixes: bd24fcddf6b8 ("media: cxd2880-spi: Add support for CXD2880 SPI interface")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f89f7b59a6ea17e81cff212c18a0b580ff5ff27 ]
The offsets for the defined BCR reset registers does not match the hardware
documentation. Update the values to match the hardware documentation.
Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7bb7d29cffdd24bf419516d14b6768591e74069e ]
The third parent of CSI_MCLK is PLL_PERIPH1, not PLL_PERIPH0.
Fix it.
Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 376d8c45bd6ac79f02ecf9ca1606dc5d1b271bc0 ]
Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better
name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is
located at HHI_VID_PLL_CNTL[14:10] instead of [13:9].
This results in an incorrect calculation of the rate of this PLL because
the value seen by the kernel is double the actual N (divider) value.
Update the offset of the N value to fix the calculation of the PLL rate.
Fixes: 28b9fcd016126e ("clk: meson8b: Add support for Meson8b clocks")
Reported-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181202214220.7715-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c40ad24254f1dbd54f2df5f5f524130dc1862122 ]
PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.
While at it, unify the names for the nodes across all pxa platforms.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4348433d8c0234f44adb6e12112e69343f50f0c5 ]
mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both
values are unsigned 32-bit entities, so there is no reason to pretend
returning a signed one.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e07db28eea38ed4e332b3a89f3995c86b713cb5b ]
Building a single target in an external module fails due to missing
.tmp_versions directory.
For example,
$ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o
will fail in the following way:
CC [M] /home/masahiro/foo/foo.o
/bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent
This is because $(cmd_crmodverdir) is executed only before building
/, %/, %.ko single targets of external modules. Create .tmp_versions
in the 'prepare' target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4d26f1a0958bb1c2b60c6f1e67c6f5d43e2647b ]
During development of a serial console driver with a gcc 8.2.0
toolchain for RISC-V, the following modpost warning appeared:
----
WARNING: vmlinux.o(.data+0x19b10): Section mismatch in reference from the variable .LANCHOR1 to the function .init.text:sifive_serial_console_setup()
The variable .LANCHOR1 references
the function __init sifive_serial_console_setup()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
----
".LANCHOR1" is an ELF local symbol, automatically created by gcc's section
anchor generation code:
https://gcc.gnu.org/onlinedocs/gccint/Anchored-Addresses.html
https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/varasm.c;h=cd9591a45617464946dcf9a126dde277d9de9804;hb=9fb89fa845c1b2e0a18d85ada0b077c84508ab78#l7473
This was verified by compiling the kernel with -fno-section-anchors
and observing that the ".LANCHOR1" ELF local symbol disappeared, and
modpost no longer warned about the section mismatch. The serial
driver code idiom triggering the warning is standard Linux serial
driver practice that has a specific whitelist inclusion in modpost.c.
I'm neither a modpost nor an ELF expert, but naively, it doesn't seem
useful for modpost to report section mismatch warnings caused by ELF
local symbols by default. Local symbols have compiler-generated
names, and thus bypass modpost's whitelisting algorithm, which relies
on the presence of a non-autogenerated symbol name. This increases
the likelihood that false positive warnings will be generated (as in
the above case).
Thus, disable section mismatch reporting on ELF local symbols. The
rationale here is similar to that of commit 2e3a10a1551d ("ARM: avoid
ARM binutils leaking ELF local symbols") and of similar code already
present in modpost.c:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/mod/modpost.c?h=v4.19-rc4&id=7876320f88802b22d4e2daf7eb027dd14175a0f8#n1256
This third version of the patch implements a suggestion from Masahiro
Yamada <yamada.masahiro@socionext.com> to restructure the code as an
additional pattern matching step inside secref_whitelist(), and
further improves the patch description.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e1561fe2dd69dc5dddd69bd73aa65355bdfb048b ]
Previously the SNMP TCPTIMEOUTS counter has inconsistent accounting:
1. It counts all SYN and SYN-ACK timeouts
2. It counts timeouts in other states except recurring timeouts and
timeouts after fast recovery or disorder state.
Such selective accounting makes analysis difficult and complicated. For
example the monitoring system needs to collect many other SNMP counters
to infer the total amount of timeout events. This patch makes TCPTIMEOUTS
counter simply counts all the retransmit timeout (SYN or data or FIN).
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec641b39457e17774313b66697a8a1dc070257bd ]
Previously the SNMP counter LINUX_MIB_TCPRETRANSFAIL is not counting
the TSO/GSO properly on failed retransmission. This patch fixes that.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Hans Verkuil
Lucas Stach
Kai-Heng Feng
Takashi Iwai
Kailang Yang
Hui Wang
Jian-Hong Pan
Miklos Szeredi
Xuewei Zhang
Dmitry Bogdanov
Helen Fornazier
Felix Brack
Rob Herring
Ladislav Michl
Niklas Söderlund
YueHaibing
Qian Cai
Mike Marciniszyn
Kaike Wan
Nir Dotan
Geert Uytterhoeven
Jakub Audykowicz
Bjorn Andersson
Jonathan Marek
Andreas Pape
Dmitry Safonov
Paul Kocialkowski
Ryan Case
Kieran Bingham
zhengbin
Aaro Koskinen
Takeshi Kihara
Joel Stanley
Kees Cook
Erez Alfasi
David Teigland
Neil Armstrong
Jeffrey Hugo
Chen-Yu Tsai
Martin Blumenstingl
Daniel Mack
Miquel Raynal
Masahiro Yamada
Paul Walmsley
Yuchung Cheng