aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2019-03-05Linux 4.19.27v4.19.27Greg Kroah-Hartman
2019-03-05x86/uaccess: Don't leak the AC flag into __put_user() value evaluationAndy Lutomirski
commit 2a418cf3f5f1caf911af288e978d61c9844b0695 upstream. When calling __put_user(foo(), ptr), the __put_user() macro would call foo() in between __uaccess_begin() and __uaccess_end(). If that code were buggy, then those bugs would be run without SMAP protection. Fortunately, there seem to be few instances of the problem in the kernel. Nevertheless, __put_user() should be fixed to avoid doing this. Therefore, evaluate __put_user()'s argument before setting AC. This issue was noticed when an objtool hack by Peter Zijlstra complained about genregs_get() and I compared the assembly output to the C source. [ bp: Massage commit message and fixed up whitespace. ] Fixes: 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05MIPS: eBPF: Fix icache flush end addressPaul Burton
commit d1a2930d8a992fb6ac2529449f81a0056e1b98d1 upstream. The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05MIPS: BCM63XX: provide DMA masks for ethernet devicesJonas Gorski
commit 18836b48ebae20850631ee2916d0cdbb86df813d upstream. The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05MIPS: fix truncation in __cmpxchg_small for short valuesMichael Clark
commit 94ee12b507db8b5876e31c9d6c9d84f556a4b49f upstream. __cmpxchg_small erroneously uses u8 for load comparison which can be either char or short. This patch changes the local variable to u32 which is sufficiently sized, as the loaded value is already masked and shifted appropriately. Using an integer size avoids any unnecessary canonicalization from use of non native widths. This patch is part of a series that adapts the MIPS small word atomics code for xchg and cmpxchg on short and char to RISC-V. Cc: RISC-V Patches <patches@groups.riscv.org> Cc: Linux RISC-V <linux-riscv@lists.infradead.org> Cc: Linux MIPS <linux-mips@linux-mips.org> Signed-off-by: Michael Clark <michaeljclark@mac.com> [paul.burton@mips.com: - Fix varialble typo per Jonas Gorski. - Consolidate load variable with other declarations.] Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3ba7f44d2b19 ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05hugetlbfs: fix races and page leaks during migrationMike Kravetz
commit cb6acd01e2e43fd8bad11155752b7699c3d0fb76 upstream. hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05drm: Block fb changes for async plane updatesNicholas Kazlauskas
commit 2216322919c8608a448d7ebc560a845238a5d6b6 upstream. The prepare_fb call always happens on new_plane_state. The drm_atomic_helper_cleanup_planes checks to see if plane state pointer has changed when deciding to call cleanup_fb on either the new_plane_state or the old_plane_state. For a non-async atomic commit the state pointer is swapped, so this helper calls prepare_fb on the new_plane_state and cleanup_fb on the old_plane_state. This makes sense, since we want to prepare the framebuffer we are going to use and cleanup the the framebuffer we are no longer using. For the async atomic update helpers this differs. The async atomic update helpers perform in-place updates on the existing state. They call drm_atomic_helper_cleanup_planes but the state pointer is not swapped. This means that prepare_fb is called on the new_plane_state and cleanup_fb is called on the new_plane_state (not the old). In the case where old_plane_state->fb == new_plane_state->fb then there should be no behavioral difference between an async update and a non-async commit. But there are issues that arise when old_plane_state->fb != new_plane_state->fb. The first is that the new_plane_state->fb is immediately cleaned up after it has been prepared, so we're using a fb that we shouldn't be. The second occurs during a sequence of async atomic updates and non-async regular atomic commits. Suppose there are two framebuffers being interleaved in a double-buffering scenario, fb1 and fb2: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 We call cleanup_fb on fb2 twice in this example scenario, and any further use will result in use-after-free. The simple fix to this problem is to block framebuffer changes in the drm_atomic_helper_async_check function for now. v2: Move check by itself, add a FIXME (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/275364/ Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mm: enforce min addr even if capable() in expand_downwards()Jann Horn
commit 0a1d52994d440e21def1c2174932410b4f2a98a1 upstream. security_mmap_addr() does a capability check with current_cred(), but we can reach this code from contexts like a VFS write handler where current_cred() must not be used. This can be abused on systems without SMAP to make NULL pointer dereferences exploitable again. Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN
commit e30be063d6dbcc0f18b1eb25fa709fdef89201fb upstream. Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: cqhci: Fix a tiny potential memory leak on error conditionAlamy Liu
commit d07e9fadf3a6b466ca3ae90fa4859089ff20530f upstream. Free up the allocated memory in the case of error return The value of mmc_host->cqe_enabled stays 'false'. Thus, cqhci_disable (mmc_cqe_ops->cqe_disable) won't be called to free the memory. Also, cqhci_disable() seems to be designed to disable and free all resources, not suitable to handle this corner case. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: cqhci: fix space allocated for transfer descriptorAlamy Liu
commit 27ec9dc17c48ea2e642ccb90b4ebf7fd47468911 upstream. There is not enough space being allocated when DCMD is disabled. CQE_DCMD is not necessary to be enabled when CQE is enabled. (Software could halt CQE to send command) In the case that CQE_DCMD is not enabled, it still needs to allocate space for data transfer. For instance: CQE_DCMD is enabled: 31 slots space (one slot used by DCMD) CQE_DCMD is disabled: 32 slots space Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: core: Fix NULL ptr crash from mmc_should_fail_requestRitesh Harjani
commit e5723f95d6b493dd437f1199cacb41459713b32f upstream. In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD). In such case mmc_should_fail_request is directly dereferencing mrq->cmd while cmd is NULL. Fix this by checking for mrq->cmd pointer. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio: fix access width of Block Count RegisterTakeshi Saito
commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream. In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov
commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: spi: Fix card detection during probeJonathan Neuschäfer
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05kvm: selftests: Fix region overlap check in kvm_utilBen Gardon
[ Upstream commit 94a980c39c8e3f8abaff5d3b5bbcd4ccf1c02c4f ] Fix a call to userspace_mem_region_find to conform to its spec of taking an inclusive, inclusive range. It was previously being called with an inclusive, exclusive range. Also remove a redundant region bounds check in vm_userspace_mem_region_add. Region overlap checking is already performed by the call to userspace_mem_region_find. Tested: Compiled tools/testing/selftests/kvm with -static Ran all resulting test binaries on an Intel Haswell test machine All tests passed Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting ↵Vitaly Kuznetsov
to L1 [ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ] kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being delivered to the host (L1) when it's running nested. The problem seems to be: svm_complete_interrupts() raises 'nmi_injected' flag but later we decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI injection upon entry so it got delivered to L1 instead of L2. It seems that VMX code solves the same issue in prepare_vmcs12(), this was introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework event injection and recovery"). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05svm: Fix AVIC incomplete IPI emulationSuravee Suthikulpanit
[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ] In case of incomplete IPI with invalid interrupt type, the current SVM driver does not properly emulate the IPI, and fails to boot FreeBSD guests with multiple vcpus when enabling AVIC. Fix this by update APIC ICR high/low registers, which also emulate sending the IPI. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05cfg80211: extend range deviation for DMGChaitanya Tata
[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ] Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ] During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ibmveth: Do not process frames after calling napi_rescheduleThomas Falcon
[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ] The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: dev_is_mac_header_xmit() true for ARPHRD_RAWIPMaciej Żenczykowski
[ Upstream commit 3b707c3008cad04604c1f50e39f456621821c414 ] __bpf_redirect() and act_mirred checks this boolean to determine whether to prefix an ethernet header. Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: usb: asix: ax88772_bind return error when hw_reset failZhang Run
[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: Zhang Run <zhang.run@zte.com.cn> Reviewed-by: Yang Wei <yang.wei9@zte.com.cn> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/msm: Fix A6XX support for opp-levelDouglas Anderson
[ Upstream commit a3c5e2cd79753121f49a8662c1e0a60ddb5486ca ] The bindings for Qualcomm opp levels changed after being Acked but before landing. Thus the code in the GPU driver that was relying on the old bindings is now broken. Let's change the code to match the new bindings by adjusting the old string 'qcom,level' to the new string 'opp-level'. See the patch ("dt-bindings: opp: Introduce opp-level bindings"). NOTE: we will do additional cleanup to totally remove the string from the code and use the new dev_pm_opp_get_level() but we'll do it in a future patch. This will facilitate getting the important code fix in sooner without having to deal with cross-maintainer dependencies. This patch needs to land before the patch ("arm64: dts: sdm845: Add gpu and gmu device nodes") since if a tree contains the device tree patch but not this one you'll get a crash at bootup. Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05nvme-multipath: drop optimization for static ANA group IDsHannes Reinecke
[ Upstream commit 78a61cd42a64f3587862b372a79e1d6aaf131fd7 ] Bit 6 in the ANACAP field is used to indicate that the ANA group ID doesn't change while the namespace is attached to the controller. There is an optimisation in the code to only allocate space for the ANA group header, as the namespace list won't change and hence would not need to be refreshed. However, this optimisation was never carried over to the actual workflow, which always assumes that the buffer is large enough to hold the ANA header _and_ the namespace list. So drop this optimisation and always allocate enough space. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05nvme-rdma: fix timeout handlerSagi Grimberg
[ Upstream commit 4c174e6366746ae8d49f9cc409f728eebb7a9ac9 ] Currently, we have several problems with the timeout handler: 1. If we timeout on the controller establishment flow, we will hang because we don't execute the error recovery (and we shouldn't because the create_ctrl flow needs to fail and cleanup on its own) 2. We might also hang if we get a disconnet on a queue while the controller is already deleting. This racy flow can cause the controller disable/shutdown admin command to hang. We cannot complete a timed out request from the timeout handler without mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work). So we serialize it in the timeout handler and teardown io and admin queues to guarantee that no one races with us from completing the request. Reported-by: Jaesoo Lee <jalee@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05hv_netvsc: Fix hash key value reset after other opsHaiyang Zhang
[ Upstream commit 17d91256898402daf4425cc541ac9cbf64574d9a ] Changing mtu, channels, or buffer sizes ops call to netvsc_attach(), rndis_set_subchannel(), which always reset the hash key to default value. That will override hash key changed previously. This patch fixes the problem by save the hash key, then restore it when we re- add the netvsc device. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05hv_netvsc: Refactor assignments of struct netvsc_device_infoHaiyang Zhang
[ Upstream commit 7c9f335a3ff20557a92584199f3d35c7e992bbe5 ] These assignments occur in multiple places. The patch refactor them to a function for simplicity. It also puts the struct to heap area for future expension. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05hv_netvsc: Fix ethtool change hash key errorHaiyang Zhang
[ Upstream commit b4a10c750424e01b5e37372fef0a574ebf7b56c3 ] Hyper-V hosts require us to disable RSS before changing RSS key, otherwise the changing request will fail. This patch fixes the coding error. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Reported-by: Wei Hu <weh@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [sl: fix up subject line] Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05net: altera_tse: fix connect_local_phy error pathAtsushi Nemoto
[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ] The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()Varun Prakash
[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ] Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to avoid a NULL pointer dereference in csio_vport_set_state(). ln->fc_vport is dereferenced in csio_vport_set_state(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetportEwan D. Milne
[ Upstream commit c41f59884be5cca293ed61f3d64637dbba3a6381 ] We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05scsi: lpfc: nvme: avoid hang / use-after-free when destroying localportEwan D. Milne
[ Upstream commit 7961cba6f7d8215fa632df3d220e5154bb825249 ] We cannot wait on a completion object in the lpfc_nvme_lport structure in the _destroy_localport() code path because the NVMe/fc transport will free that structure immediately after the .localport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05writeback: synchronize sync(2) against cgroup writeback membership switchesTejun Heo
[ Upstream commit 7fc5854f8c6efae9e7624970ab49a1eac2faefb1 ] sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05direct-io: allow direct writes to empty inodesErnesto A. Fernández
[ Upstream commit 8b9433eb4de3c26a9226c981c283f9f4896ae030 ] On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05staging: android: ion: Support cpu access during dma_buf_detachLiam Mark
[ Upstream commit 31eb79db420a3f94c4c45a8c0a05cd30e333f981 ] Often userspace doesn't know when the kernel will be calling dma_buf_detach on the buffer. If userpace starts its CPU access at the same time as the sg list is being freed it could end up accessing the sg list after it has been freed. Thread A Thread B - DMA_BUF_IOCTL_SYNC IOCT - ion_dma_buf_begin_cpu_access - list_for_each_entry - ion_dma_buf_detatch - free_duped_table - dma_sync_sg_for_cpu Fix this by getting the ion_buffer lock before freeing the sg table memory. Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping") Signed-off-by: Liam Mark <lmark@codeaurora.org> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/sun4i: hdmi: Fix usage of TMDS clockPriit Laes
[ Upstream commit 5e1bc251cebc84b41b8eb5d2434e54d939a85430 ] Although TMDS clock is required for HDMI to properly function, nobody called clk_prepare_enable(). This fixes reference counting issues and makes sure clock is running when it needs to be running. Due to TDMS clock being parent clock for DDC clock, TDMS clock was turned on/off for each EDID probe, causing spurious failures for certain HDMI/DVI screens. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Priit Laes <priit.laes@paf.com> [Maxime: Moved the TMDS clock enable earlier] Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ] Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabledMatthias Kaehlcke
[ Upstream commit e8a6ca808c5ed1e2b43ab25f1f2cbd43a7574f73 ] The geni set/get_mctrl() functions currently do nothing unless hardware flow control is enabled. Remove this arbitrary limitation. Suggested-by: Johan Hovold <johan@kernel.org> Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drm/amd/powerplay: OD setting fix on Vega10Kenneth Feng
[ Upstream commit 6d87dc97eb3341de3f7b1efa3156cb0e014f4a96 ] gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05locking/rwsem: Fix (possible) missed wakeupXie Yongji
[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ] Because wake_q_add() can imply an immediate wakeup (cmpxchg failure case), we must not rely on the wakeup being delayed. However, commit: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") relies on exactly that behaviour in that the wakeup must not happen until after we clear waiter->task. [ peterz: Added changelog. ] Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05futex: Fix (possible) missed wakeupPeter Zijlstra
[ Upstream commit b061c38bef43406df8e73c5be06cbfacad5ee6ad ] We must not rely on wake_q_add() to delay the wakeup; in particular commit: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which could result in futex_wait() waking before observing ->lock_ptr == NULL and going back to sleep again. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05sched/wake_q: Fix wakeup ordering for wake_qPeter Zijlstra
[ Upstream commit 4c4e3731564c8945ac5ac90fc2a1e1f21cb79c92 ] Notable cmpxchg() does not provide ordering when it fails, however wake_q_add() requires ordering in this specific case too. Without this it would be possible for the concurrent wakeup to not observe our prior state. Andrea Parri provided: C wake_up_q-wake_q_add { int next = 0; int y = 0; } P0(int *next, int *y) { int r0; /* in wake_up_q() */ WRITE_ONCE(*next, 1); /* node->next = NULL */ smp_mb(); /* implied by wake_up_process() */ r0 = READ_ONCE(*y); } P1(int *next, int *y) { int r1; /* in wake_q_add() */ WRITE_ONCE(*y, 1); /* wake_cond = true */ smp_mb__before_atomic(); r1 = cmpxchg_relaxed(next, 1, 2); } exists (0:r0=0 /\ 1:r1=0) This "exists" clause cannot be satisfied according to the LKMM: Test wake_up_q-wake_q_add Allowed States 3 0:r0=0; 1:r1=1; 0:r0=1; 1:r1=0; 0:r0=1; 1:r1=1; No Witnesses Positive: 0 Negative: 3 Condition exists (0:r0=0 /\ 1:r1=0) Observation wake_up_q-wake_q_add Never 0 3 Reported-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05sched/wait: Fix rcuwait_wake_up() orderingPrateek Sood
[ Upstream commit 6dc080eeb2ba01973bfff0d79844d7a59e12542e ] For some peculiar reason rcuwait_wake_up() has the right barrier in the comment, but not in the code. This mistake has been observed to cause a deadlock in the following situation: P1 P2 percpu_up_read() percpu_down_write() rcu_sync_is_idle() // false rcu_sync_enter() ... __percpu_up_read() [S] ,- __this_cpu_dec(*sem->read_count) | smp_rmb(); [L] | task = rcu_dereference(w->task) // NULL | | [S] w->task = current | smp_mb(); | [L] readers_active_check() // fail `-> <store happens here> Where the smp_rmb() (obviously) fails to constrain the store. [ peterz: Added changelog. ] Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8f95c90ceb54 ("sched/wait, RCU: Introduce rcuwait machinery") Link: https://lkml.kernel.org/r/1543590656-7157-1-git-send-email-prsood@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: fix miscounting of ttl-dropped framesBob Copeland
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05staging: rtl8723bs: Fix build error with Clang when inlining is disabledNathan Chancellor
[ Upstream commit 97715058b70da1262fd07798c8b2e3e894f759dd ] When CONFIG_NO_AUTO_INLINE was present in linux-next (which added '-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with Clang failed at the modpost stage: ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! These functions were marked as extern inline, meaning that if inlining doesn't happen, the function will be undefined, as it is above. This happens to work with GCC because the '-fno-inline-functions' option respects the __inline attribute so all instances of these functions are inlined as expected and the definition doesn't actually matter. However, with Clang and '-fno-inline-functions', a function has to be marked with the __always_inline attribute to be considered for inlining, which none of these functions are. Clang tries to find the symbol definition elsewhere as it was told and fails, which trickles down to modpost. To make sure that this code compiles regardless of compiler and make the intention of the code clearer, use 'static' to ensure these functions are always defined, regardless of inlining. Additionally, silence a checkpatch warning by switching from '__inline' to 'inline'. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05drivers: thermal: int340x_thermal: Fix sysfs race conditionAaron Hill
[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ] Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ARC: show_regs: lockdep: avoid page allocator...Vineet Gupta
[ Upstream commit ab6c03676cb190156603cf4c5ecf97aa406c9c53 ] and use smaller/on-stack buffer instead The motivation for this change was lockdep splat like below. | potentially unexpected fatal signal 11. | BUG: sleeping function called from invalid context at ../mm/page_alloc.c:4317 | in_atomic(): 1, irqs_disabled(): 0, pid: 57, name: segv | no locks held by segv/57. | Preemption disabled at: | [<8182f17e>] get_signal+0x4a6/0x7c4 | CPU: 0 PID: 57 Comm: segv Not tainted 4.17.0+ #23 | | Stack Trace: | arc_unwind_core.constprop.1+0xd0/0xf4 | __might_sleep+0x1f6/0x234 | __get_free_pages+0x174/0xca0 | show_regs+0x22/0x330 | get_signal+0x4ac/0x7c4 # print_fatal_signals() -> preempt_disable() | do_signal+0x30/0x224 | resume_user_mode_begin+0x90/0xd8 So signal handling core calls show_regs() with preemption disabled but an ensuing GFP_KERNEL page allocator call is flagged by lockdep. We could have switched to GFP_NOWAIT, but turns out that is not enough anways and eliding page allocator call leads to less code and instruction traces to sift thru when debugging pesky crashes. FWIW, this patch doesn't cure the lockdep splat (which next patch does). Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05ARC: fix __ffs return value to avoid build warningsEugeniy Paltsev
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ] | CC mm/nobootmem.o |In file included from ./include/asm-generic/bug.h:18:0, | from ./arch/arc/include/asm/bug.h:32, | from ./include/linux/bug.h:5, | from ./include/linux/mmdebug.h:5, | from ./include/linux/gfp.h:5, | from ./include/linux/slab.h:15, | from mm/nobootmem.c:14: |mm/nobootmem.c: In function '__free_pages_memory': |./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^ |./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck' | (__typecheck(x, y) && __no_side_effects(x, y)) | ^~~~~~~~~~~ |./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp' | __builtin_choose_expr(__safe_cmp(x, y), \ | ^~~~~~~~~~ |./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp' | #define min(x, y) __careful_cmp(x, y, <) | ^~~~~~~~~~~~~ |mm/nobootmem.c:104:11: note: in expansion of macro 'min' | order = min(MAX_ORDER - 1UL, __ffs(start)); Change __ffs return value from 'int' to 'unsigned long' as it is done in other implementations (like asm-generic, x86, etc...) to avoid build-time warnings in places where type is strictly checked. As __ffs may return values in [0-31] interval changing return type to unsigned is valid. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>