summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-05-27stmmac: fix pointer check after utilization in stmmac_interruptMaxim Petrov
[ Upstream commit f42234ffd531ca6b13d9da02faa60b72eccf8334 ] The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ceph: fix double unlock in handle_cap_export()Wu Bo
[ Upstream commit 4d8e28ff3106b093d98bfd2eceb9b430c70a8758 ] If the ceph_mdsc_open_export_target_session() return fails, it will do a "goto retry", but the session mutex has already been unlocked. Re-lock the mutex in that case to ensure that we don't unlock it twice. Signed-off-by: Wu Bo <wubo40@huawei.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dockHans de Goede
[ Upstream commit 1e189f267015a098bdcb82cc652d13fbf2203fa0 ] Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock, which can be used with various Dell Venue 11 models. Without this quirk the keyboard/touchpad combo works fine when connected at boot, but when hotplugged 9 out of 10 times it will not work properly. Adding the quirk fixes this. Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()Yoshiyuki Kurauchi
[ Upstream commit 846c68f7f1ac82c797a2f1db3344a2966c0fe2e1 ] In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27x86/apic: Move TSC deadline timer debug printkThomas Gleixner
[ Upstream commit c84cb3735fd53c91101ccdb191f2e3331a9262cb ] Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a lockdep splat due to a lock order violation between hrtimer_base::lock and console_sem, when the 'once' condition is reset via /sys/kernel/debug/clear_warn_once after boot. The initial printk cannot trigger this because that happens during boot when the local APIC timer is set up on the boot CPU. Prevent it by moving the printk to a place which is guaranteed to be only called once during boot. Mark the deadline timer check related functions and data __init while at it. Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal
[ Upstream commit 538f67407e2c0e5ed2a46e7d7ffa52f2e30c7ef8 ] On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27scsi: ibmvscsi: Fix WARN_ON during event pool releaseTyrel Datwyler
[ Upstream commit b36522150e5b85045f868768d46fbaaa034174b2 ] While removing an ibmvscsi client adapter a WARN_ON like the following is seen in the kernel log: drmgr: drmgr: -r -c slot -s U9080.M9S.783AEC8-V11-C11 -w 5 -d 1 WARNING: CPU: 9 PID: 24062 at ../kernel/dma/mapping.c:311 dma_free_attrs+0x78/0x110 Supported: No, Unreleased kernel CPU: 9 PID: 24062 Comm: drmgr Kdump: loaded Tainted: G X 5.3.18-12-default NIP: c0000000001fa758 LR: c0000000001fa744 CTR: c0000000001fa6e0 REGS: c0000002173375d0 TRAP: 0700 Tainted: G X (5.3.18-12-default) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28088282 XER: 20000000 CFAR: c0000000001fbf0c IRQMASK: 1 GPR00: c0000000001fa744 c000000217337860 c00000000161ab00 0000000000000000 GPR04: 0000000000000000 c000011e12250000 0000000018010000 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000001 c0080000190f4fa8 GPR12: c0000000001fa6e0 c000000007fc2a00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 000000011420e310 0000000000000000 0000000000000000 0000000018010000 GPR28: c00000000159de50 c000011e12250000 0000000000006600 c000011e5c994848 NIP [c0000000001fa758] dma_free_attrs+0x78/0x110 LR [c0000000001fa744] dma_free_attrs+0x64/0x110 Call Trace: [c000000217337860] [000000011420e310] 0x11420e310 (unreliable) [c0000002173378b0] [c0080000190f0280] release_event_pool+0xd8/0x120 [ibmvscsi] [c000000217337930] [c0080000190f3f74] ibmvscsi_remove+0x6c/0x160 [ibmvscsi] [c000000217337960] [c0000000000f3cac] vio_bus_remove+0x5c/0x100 [c0000002173379a0] [c00000000087a0a4] device_release_driver_internal+0x154/0x280 [c0000002173379e0] [c0000000008777cc] bus_remove_device+0x11c/0x220 [c000000217337a60] [c000000000870fc4] device_del+0x1c4/0x470 [c000000217337b10] [c0000000008712a0] device_unregister+0x30/0xa0 [c000000217337b80] [c0000000000f39ec] vio_unregister_device+0x2c/0x60 [c000000217337bb0] [c00800001a1d0964] dlpar_remove_slot+0x14c/0x250 [rpadlpar_io] [c000000217337c50] [c00800001a1d0bcc] remove_slot_store+0xa4/0x110 [rpadlpar_io] [c000000217337cd0] [c000000000c091a0] kobj_attr_store+0x30/0x50 [c000000217337cf0] [c00000000057c934] sysfs_kf_write+0x64/0x90 [c000000217337d10] [c00000000057be10] kernfs_fop_write+0x1b0/0x290 [c000000217337d60] [c000000000488c4c] __vfs_write+0x3c/0x70 [c000000217337d80] [c00000000048c648] vfs_write+0xd8/0x260 [c000000217337dd0] [c00000000048ca8c] ksys_write+0xdc/0x130 [c000000217337e20] [c00000000000b488] system_call+0x5c/0x70 Instruction dump: 7c840074 f8010010 f821ffb1 20840040 eb830218 7c8407b4 48002019 60000000 2fa30000 409e003c 892d0988 792907e0 <0b090000> 2fbd0000 419e0028 2fbc0000 ---[ end trace 5955b3c0cc079942 ]--- rpadlpar_io: slot U9080.M9S.783AEC8-V11-C11 removed This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by release_event_pool(). At this point in the code path we have quiesced the adapter and it is overly paranoid to be holding the host lock. [mkp: fixed build warning reported by sfr] Link: https://lore.kernel.org/r/1588027793-17952-1-git-send-email-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27component: Silence bind error on -EPROBE_DEFERJames Hilliard
[ Upstream commit 7706b0a76a9697021e2bf395f3f065c18f51043d ] If a component fails to bind due to -EPROBE_DEFER we should not log an error as this is not a real failure. Fixes messages like: vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 vc4-drm soc:gpu: master bind failed: -517 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200411190241.89404-1-james.hilliard1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27aquantia: Fix the media type of AQC100 ethernet controller in the driverRichard Clark
[ Upstream commit 6de556c31061e3b9c36546ffaaac5fdb679a2f14 ] The Aquantia AQC100 controller enables a SFP+ port, so the driver should configure the media type as '_TYPE_FIBRE' instead of '_TYPE_TP'. Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com> Cc: Igor Russkikh <irusskikh@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27vhost/vsock: fix packet delivery order to monitoring devicesStefano Garzarella
[ Upstream commit 107bc0766b9feb5113074c753735a3f115c2141f ] We want to deliver packets to monitoring devices before it is put in the virtqueue, to avoid that replies can appear in the packet capture before the transmitted packet. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27configfs: fix config_item refcnt leak in configfs_rmdir()Xiyu Yang
[ Upstream commit 8aebfffacfa379ba400da573a5bf9e49634e38cb ] configfs_rmdir() invokes configfs_get_config_item(), which returns a reference of the specified config_item object to "parent_item" with increased refcnt. When configfs_rmdir() returns, local variable "parent_item" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of configfs_rmdir(). When down_write_killable() fails, the function forgets to decrease the refcnt increased by configfs_get_config_item(), causing a refcnt leak. Fix this issue by calling config_item_put() when down_write_killable() fails. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27scsi: qla2xxx: Delete all sessions before unregister local nvme portQuinn Tran
[ Upstream commit c48f849d3f7a4ec1025105f446e29d395c4dcc2f ] Delete all sessions before unregistering local nvme port. This allows nvme layer to decrement all active rport count down to zero. Once the count is down to zero, nvme would call qla to continue with the npiv port deletion. PID: 27448 TASK: ffff9e34b777c1c0 CPU: 0 COMMAND: "qaucli" 0 [ffff9e25e84abbd8] __schedule at ffffffff977858ca 1 [ffff9e25e84abc68] schedule at ffffffff97785d79 2 [ffff9e25e84abc78] schedule_timeout at ffffffff97783881 3 [ffff9e25e84abd28] wait_for_completion at ffffffff9778612d 4 [ffff9e25e84abd88] qla_nvme_delete at ffffffffc0e3024e [qla2xxx] 5 [ffff9e25e84abda8] qla24xx_vport_delete at ffffffffc0e024b9 [qla2xxx] 6 [ffff9e25e84abdf0] fc_vport_terminate at ffffffffc011c247 [scsi_transport_fc] 7 [ffff9e25e84abe28] store_fc_host_vport_delete at ffffffffc011cd94 [scsi_transport_fc] 8 [ffff9e25e84abe70] dev_attr_store at ffffffff974b376b 9 [ffff9e25e84abe80] sysfs_kf_write at ffffffff972d9a92 10 [ffff9e25e84abe90] kernfs_fop_write at ffffffff972d907b 11 [ffff9e25e84abec8] vfs_write at ffffffff9724c790 12 [ffff9e25e84abf08] sys_write at ffffffff9724d55f 13 [ffff9e25e84abf50] system_call_fastpath at ffffffff97792ed2 RIP: 00007fc0bd81a6fd RSP: 00007ffff78d9648 RFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000022 RCX: 00007ffff78d96e0 RDX: 0000000000000022 RSI: 00007ffff78d94e0 RDI: 0000000000000008 RBP: 00007ffff78d9440 R8: 0000000000000000 R9: 00007fc0bd48b2cd R10: 0000000000000017 R11: 0000000000000293 R12: 0000000000000000 R13: 00005624e4dac840 R14: 00005624e4da9a10 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Link: https://lore.kernel.org/r/20200331104015.24868-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIVArun Easi
[ Upstream commit 45a76264c26fd8cfd0c9746196892d9b7e2657ee ] In NPIV environment, a NPIV host may use a queue pair created by base host or other NPIVs, so the check for a queue pair created by this NPIV is not correct, and can cause an abort to fail, which in turn means the NVME command not returned. This leads to hang in nvme_fc layer in nvme_fc_delete_association() which waits for all I/Os to be returned, which is seen as hang in the application. Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY insteadJiri Kosina
[ Upstream commit 185af3e775b693f773d9a4b5a8c3cda69fc8ca0f ] HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other ALPS hardware IDs using this particular touchpad. Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order to describe reality better. Fixes: 640e403b1fd24 ("HID: alps: Add AUI1657 device ID") Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27HID: alps: Add AUI1657 device IDArtem Borisov
[ Upstream commit 640e403b1fd24e7f31ac6f29f0b6a21d285ed729 ] This device is used on Lenovo V130-15IKB variants and uses the same registers as U1. Signed-off-by: Artem Borisov <dedsa2002@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27HID: multitouch: add eGalaxTouch P80H84 supportSebastian Reichel
[ Upstream commit f9e82295eec141a0569649d400d249333d74aa91 ] Add support for P80H84 touchscreen from eGalaxy: idVendor 0x0eef D-WAV Scientific Co., Ltd idProduct 0xc002 iManufacturer 1 eGalax Inc. iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27gcc-common.h: Update for GCC 10Frédéric Pierret (fepitre)
[ Upstream commit c7527373fe28f97d8a196ab562db5589be0d34b9 ] Remove "params.h" include, which has been dropped in GCC 10. Remove is_a_helper() macro, which is now defined in gimple.h, as seen when running './scripts/gcc-plugin.sh g++ g++ gcc': In file included from <stdin>:1: ./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ 852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./gcc-plugins/gcc-common.h:125, from <stdin>:1: /usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here 1037 | is_a_helper <const ggoto *>::test (const gimple *gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid meaningless warnings from error() formats used by plugins: scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’: scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag] 253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org> Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org [kees: include -Wno-format-diag for plugin builds] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ubi: Fix seq_file usage in detailed_erase_block_info debugfs fileRichard Weinberger
[ Upstream commit 0e7572cffe442290c347e779bf8bd4306bb0aa7c ] 3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions") showed that we don't use seq_file correctly. So make sure that our ->next function always updates the position. Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state") Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27i2c: mux: demux-pinctrl: Fix an error handling path in ↵Christophe JAILLET
'i2c_demux_pinctrl_probe()' [ Upstream commit e9d1a0a41d4486955e96552293c1fcf1fce61602 ] A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27iommu/amd: Fix over-read of ACPI UID from IVRS tableAlexander Monakov
[ Upstream commit e461b8c991b9202b007ea2059d953e264240b0c9 ] IVRS parsing code always tries to read 255 bytes from memory when retrieving ACPI device path, and makes an assumption that firmware provides a zero-terminated string. Both of those are bugs: the entry is likely to be shorter than 255 bytes, and zero-termination is not guaranteed. With Acer SF314-42 firmware these issues manifest visibly in dmesg: AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1... The first three lines show how the code over-reads adjacent table entries into the UID, and in the last line it even reads garbage data beyond the end of the IVRS table itself. Since each entry has the length of the UID (uidl member of ivhd_entry struct), use that for memcpy, and manually add a zero terminator. Avoid zero-filling hid and uid arrays up front, and instead ensure the uid array is always zero-terminated. No change needed for the hid array, as it was already properly zero-terminated. Fixes: 2a0cb4e2d423c ("iommu/amd: Add new map for storing IVHD dev entry type HID") Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Link: https://lore.kernel.org/r/20200511102352.1831-1-amonakov@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ubifs: remove broken lazytime supportChristoph Hellwig
[ Upstream commit ecf84096a526f2632ee85c32a3d05de3fa60ce80 ] When "ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs" introduced atime support to ubifs, it also added lazytime support. As far as I can tell the lazytime support is terminally broken, as it causes mark_inode_dirty_sync to be called from __writeback_single_inode, which will then trigger the locking assert in ubifs_dirty_inode. Just remove the broken lazytime support for now, it can be added back later, especially as some infrastructure changes should make that easier soon. Fixes: 8c1c5f263833 ("ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27fix multiplication overflow in copy_fdtable()Al Viro
[ Upstream commit 4e89b7210403fa4a8acafe7c602b6212b7af6c3b ] cpy and set really should be size_t; we won't get an overflow on that, since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *), so nr that would've managed to overflow size_t on that multiplication won't get anywhere near copy_fdtable() - we'll fail with EMFILE before that. Cc: stable@kernel.org # v2.6.25+ Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open) Reported-by: Thiago Macieira <thiago.macieira@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27mtd: spinand: Propagate ECC information to the MTD structureMiquel Raynal
[ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ] This is done by default in the raw NAND core (nand_base.c) but was missing in the SPI-NAND core. Without these two lines the ecc_strength and ecc_step_size values are not exported to the user through sysfs. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ima: Fix return value of ima_write_policy()Roberto Sassu
[ Upstream commit 2e3a34e9f409ebe83d1af7cd2f49fca7af97dfac ] This patch fixes the return value of ima_write_policy() when a new policy is directly passed to IMA and the current policy requires appraisal of the file containing the policy. Currently, if appraisal is not in ENFORCE mode, ima_write_policy() returns 0 and leads user space applications to an endless loop. Fix this issue by denying the operation regardless of the appraisal mode. Cc: stable@vger.kernel.org # 4.10.x Fixes: 19f8a84713edc ("ima: measure and appraise the IMA policy itself") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27evm: Check also if *tfm is an error pointer in init_desc()Roberto Sassu
[ Upstream commit 53de3b080d5eae31d0de219617155dcc34e7d698 ] This patch avoids a kernel panic due to accessing an error pointer set by crypto_alloc_shash(). It occurs especially when there are many files that require an unsupported algorithm, as it would increase the likelihood of the following race condition: Task A: *tfm = crypto_alloc_shash() <= error pointer Task B: if (*tfm == NULL) <= *tfm is not NULL, use it Task B: rc = crypto_shash_init(desc) <= panic Task A: *tfm = NULL This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new crypto context must be created. Cc: stable@vger.kernel.org Fixes: d46eb3699502b ("evm: crypto hash replaced by shash") Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()Roberto Sassu
[ Upstream commit 0014cc04e8ec077dc482f00c87dfd949cfe2b98f ] Commit a408e4a86b36 ("ima: open a new file instance if no read permissions") tries to create a new file descriptor to calculate a file digest if the file has not been opened with O_RDONLY flag. However, if a new file descriptor cannot be obtained, it sets the FMODE_READ flag to file->f_flags instead of file->f_mode. This patch fixes this issue by replacing f_flags with f_mode as it was before that commit. Cc: stable@vger.kernel.org # 4.20.x Fixes: a408e4a86b36 ("ima: open a new file instance if no read permissions") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27riscv: set max_pfn to the PFN of the last pageVincent Chen
commit c749bb2d554825e007cbc43b791f54e124dadfce upstream. The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s # After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s # Cc: stable@vger.kernel.org Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Yash Shah <yash.shah@sifive.com> Tested-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> [Palmer: back-ported to 4.19] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27KVM: SVM: Fix potential memory leak in svm_cpu_init()Miaohe Lin
commit d80b64ff297e40c2b6f7d7abc1b3eba70d22a068 upstream. When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27i2c: dev: Fix the race between the release of i2c_dev and cdevKevin Hao
commit 1413ef638abae4ab5621901cf4d8ef08a4a48ba6 upstream. The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d7fda to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27ubsan: build ubsan.c more conservativelyArnd Bergmann
commit af700eaed0564d5d3963a7a51cb0843629d7fe3d upstream. objtool points out several conditions that it does not like, depending on the combination with other configuration options and compiler variants: stack protector: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled stackleak plugin: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled kasan: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled The stackleak and kasan options just need to be disabled for this file as we do for other files already. For the stack protector, we already attempt to disable it, but this fails on clang because the check is mixed with the gcc specific -fno-conserve-stack option. According to Andrey Ryabinin, that option is not even needed, dropping it here fixes the stackprotector issue. Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/ Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/ Fixes: d08965a27e84 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27x86/uaccess, ubsan: Fix UBSAN vs. SMAPPeter Zijlstra
commit d08965a27e84ca090b504844d50c24fc98587b11 upstream. UBSAN can insert extra code in random locations; including AC=1 sections. Typically this code is not safe and needs wrapping. So far, only __ubsan_handle_type_mismatch* have been observed in AC=1 sections and therefore only those are annotated. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> [stable backport: only take the lib/Makefile change to resolve gcc-10 build issues] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Linux 4.19.124v4.19.124Greg Kroah-Hartman
2020-05-20Makefile: disallow data races on gcc-10 as wellSergei Trofimovich
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mceJim Mattson
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a7740: Add missing extal2 to CPG nodeGeert Uytterhoeven
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodesYoshihiro Shimoda
commit f4d71c6ea9e58c07dd4d02d09c5dd9bb780ec4b1 upstream. Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes. Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ARM: dts: r8a73a4: Add missing CMT1 interruptsGeert Uytterhoeven
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happyChen-Yu Tsai
commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224f2c2b ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boardsChen-Yu Tsai
commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037ec88e ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20clk: Unlink clock if failed to prepare or enableMarc Zyngier
commit 018d4671b9bbd4a5c55cf6eab3e1dbc70a50b66e upstream. On failing to prepare or enable a clock, remove the core structure from the list it has been inserted as it is about to be freed. This otherwise leads to random crashes when subsequent clocks get registered, during which parsing of the clock tree becomes adventurous. Observed with QEMU's RPi-3 emulation. Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Revert "ALSA: hda/realtek: Fix pop noise on ALC225"Kai-Heng Feng
commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream. This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in cdc_bind()Wei Yongjun
commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: legacy: fix error return code in gncm_bind()Wei Yongjun
commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: audio: Fix a missing error return value in audio_bind()Christophe JAILLET
commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream. If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0. Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20usb: gadget: net2272: Fix a memory leak in an error handling path in ↵Christophe JAILLET
'net2272_plat_probe()' commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream. 'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error handling path, as already done in the remove function (i.e. 'net2272_plat_remove()') Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()John Stultz
commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream. The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg() causes us to break out of the loop before we call dwc3_gadget_ep_reclaim_completed_trb(), which is what likely should be clearing the HWO flag. This can cause odd behavior where we never reclaim all the trbs in the sg list, so we never call giveback on a usb req, and that will causes transfer stalls. This effectively resovles the adb stalls seen on HiKey960 after userland changes started only using AIO in adbd. Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Josh Gao <jmgao@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org #4.20+ Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocksJustin Swartz
commit cec9d101d70a3509da9bd2e601e0b242154ce616 upstream. The following changes prevent the unrecoverable freezes and rcu_sched stall warnings experienced in each of my attempts to take advantage of lima. Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a COMPOSITE that retains the selection of HDMIPHY as the PLL source, but instead makes uses of the aclk_gpu PLL source gate and parent names defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p. Remove the now unused mux_aclk_gpu_pre_p and the four named but also unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu) of the aclk_gpu PLL source gate. Use the correct gate offset for aclk_gpu and aclk_gpu_noc. Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Cc: stable@vger.kernel.org Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> [double-checked against SoC manual and added fixes tag] Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20exec: Move would_dump into flush_old_execEric W. Biederman
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86/unwind/orc: Fix error handling in __unwind_start()Josh Poimboeuf
commit 71c95825289f585014fe9741b051d32a7a916680 upstream. The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20x86: Fix early boot crash on gcc-10, third tryBorislav Petkov
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Kalle Valo <kvalo@codeaurora.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-25 09:22:54 +0000