diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_port.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 25 |
1 files changed, 21 insertions, 4 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 90a93c001e16..9880a50d664f 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1865,6 +1865,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) unsigned char status; unsigned long flags; struct uart_8250_port *up = up_to_u8250p(port); + bool skip_rx = false; if (iir & UART_IIR_NO_INT) return 0; @@ -1873,7 +1874,20 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - if (status & (UART_LSR_DR | UART_LSR_BI)) { + /* + * If port is stopped and there are no error conditions in the + * FIFO, then don't drain the FIFO, as this may lead to TTY buffer + * overflow. Not servicing, RX FIFO would trigger auto HW flow + * control when FIFO occupancy reaches preset threshold, thus + * halting RX. This only works when auto HW flow control is + * available. + */ + if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) && + (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) && + !(port->read_status_mask & UART_LSR_DR)) + skip_rx = true; + + if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } @@ -2264,6 +2278,10 @@ int serial8250_do_startup(struct uart_port *port) if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) { unsigned char iir1; + + if (port->irqflags & IRQF_SHARED) + disable_irq_nosync(port->irq); + /* * Test for UARTs that do not reassert THRE when the * transmitter is idle and the interrupt has already @@ -2273,8 +2291,6 @@ int serial8250_do_startup(struct uart_port *port) * allow register changes to become visible. */ spin_lock_irqsave(&port->lock, flags); - if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(port->irq); wait_for_xmitr(up, UART_LSR_THRE); serial_port_out_sync(port, UART_IER, UART_IER_THRI); @@ -2286,9 +2302,10 @@ int serial8250_do_startup(struct uart_port *port) iir = serial_port_in(port, UART_IIR); serial_port_out(port, UART_IER, 0); + spin_unlock_irqrestore(&port->lock, flags); + if (port->irqflags & IRQF_SHARED) enable_irq(port->irq); - spin_unlock_irqrestore(&port->lock, flags); /* * If the interrupt is not reasserted, or we otherwise |