diff options
Diffstat (limited to 'drivers/gpu/drm/kmb/kmb_plane.c')
| -rw-r--r-- | drivers/gpu/drm/kmb/kmb_plane.c | 81 |
1 files changed, 72 insertions, 9 deletions
diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index 45cb096455b5..00404ba4126d 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -113,9 +113,10 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, if (ret) return ret; - if (new_plane_state->crtc_w > KMB_MAX_WIDTH || new_plane_state->crtc_h > KMB_MAX_HEIGHT) - return -EINVAL; - if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT) + if (new_plane_state->crtc_w > KMB_FB_MAX_WIDTH || + new_plane_state->crtc_h > KMB_FB_MAX_HEIGHT || + new_plane_state->crtc_w < KMB_FB_MIN_WIDTH || + new_plane_state->crtc_h < KMB_FB_MIN_HEIGHT) return -EINVAL; /* Due to HW limitations, changing plane height or width after @@ -306,6 +307,44 @@ static void config_csc(struct kmb_drm_private *kmb, int plane_id) kmb_write_lcd(kmb, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]); } +static void kmb_plane_set_alpha(struct kmb_drm_private *kmb, + const struct drm_plane_state *state, + unsigned char plane_id, + unsigned int *val) +{ + u16 plane_alpha = state->alpha; + u16 pixel_blend_mode = state->pixel_blend_mode; + int has_alpha = state->fb->format->has_alpha; + + if (plane_alpha != DRM_BLEND_ALPHA_OPAQUE) + *val |= LCD_LAYER_ALPHA_STATIC; + + if (has_alpha) { + switch (pixel_blend_mode) { + case DRM_MODE_BLEND_PIXEL_NONE: + break; + case DRM_MODE_BLEND_PREMULTI: + *val |= LCD_LAYER_ALPHA_EMBED | LCD_LAYER_ALPHA_PREMULT; + break; + case DRM_MODE_BLEND_COVERAGE: + *val |= LCD_LAYER_ALPHA_EMBED; + break; + default: + DRM_DEBUG("Missing pixel blend mode case (%s == %ld)\n", + __stringify(pixel_blend_mode), + (long)pixel_blend_mode); + break; + } + } + + if (plane_alpha == DRM_BLEND_ALPHA_OPAQUE && !has_alpha) { + *val &= LCD_LAYER_ALPHA_DISABLED; + return; + } + + kmb_write_lcd(kmb, LCD_LAYERn_ALPHA(plane_id), plane_alpha); +} + static void kmb_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { @@ -333,11 +372,12 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, fb = new_plane_state->fb; if (!fb) return; + num_planes = fb->format->num_planes; kmb_plane = to_kmb_plane(plane); - plane_id = kmb_plane->id; kmb = to_kmb(plane->dev); + plane_id = kmb_plane->id; spin_lock_irq(&kmb->irq_lock); if (kmb->kmb_under_flow || kmb->kmb_flush_done) { @@ -431,20 +471,32 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, config_csc(kmb, plane_id); } + kmb_plane_set_alpha(kmb, plane->state, plane_id, &val); + kmb_write_lcd(kmb, LCD_LAYERn_CFG(plane_id), val); + /* Configure LCD_CONTROL */ + ctrl = kmb_read_lcd(kmb, LCD_CONTROL); + + /* Set layer blending config */ + ctrl &= ~LCD_CTRL_ALPHA_ALL; + ctrl |= LCD_CTRL_ALPHA_BOTTOM_VL1 | + LCD_CTRL_ALPHA_BLEND_VL2; + + ctrl &= ~LCD_CTRL_ALPHA_BLEND_BKGND_DISABLE; + switch (plane_id) { case LAYER_0: - ctrl = LCD_CTRL_VL1_ENABLE; + ctrl |= LCD_CTRL_VL1_ENABLE; break; case LAYER_1: - ctrl = LCD_CTRL_VL2_ENABLE; + ctrl |= LCD_CTRL_VL2_ENABLE; break; case LAYER_2: - ctrl = LCD_CTRL_GL1_ENABLE; + ctrl |= LCD_CTRL_GL1_ENABLE; break; case LAYER_3: - ctrl = LCD_CTRL_GL2_ENABLE; + ctrl |= LCD_CTRL_GL2_ENABLE; break; } @@ -456,7 +508,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, */ ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL; - kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl); + kmb_write_lcd(kmb, LCD_CONTROL, ctrl); /* Enable pipeline AXI read transactions for the DMA * after setting graphics layers. This must be done @@ -531,6 +583,9 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) enum drm_plane_type plane_type; const u32 *plane_formats; int num_plane_formats; + unsigned int blend_caps = BIT(DRM_MODE_BLEND_PIXEL_NONE) | + BIT(DRM_MODE_BLEND_PREMULTI) | + BIT(DRM_MODE_BLEND_COVERAGE); for (i = 0; i < KMB_MAX_PLANES; i++) { plane = drmm_kzalloc(drm, sizeof(*plane), GFP_KERNEL); @@ -562,8 +617,16 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm) drm_dbg(drm, "%s : %d i=%d type=%d", __func__, __LINE__, i, plane_type); + drm_plane_create_alpha_property(&plane->base_plane); + + drm_plane_create_blend_mode_property(&plane->base_plane, + blend_caps); + + drm_plane_create_zpos_immutable_property(&plane->base_plane, i); + drm_plane_helper_add(&plane->base_plane, &kmb_plane_helper_funcs); + if (plane_type == DRM_PLANE_TYPE_PRIMARY) { primary = plane; kmb->plane = plane; |