aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMatthew Whitehead <tedheadster@gmail.com>2019-03-14 16:46:00 -0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2019-04-20 09:17:01 +0200
commitf0a085e99ff77b741130bcb26980472912968e4f (patch)
tree4f440d671a83d88daa40808b0aa416a086b4d094
parentaaddd952f3db382b4d0786a39140ca2f8bd7334b (diff)
downloadlinux-yocto-f0a085e99ff77b741130bcb26980472912968e4f.tar.gz
linux-yocto-f0a085e99ff77b741130bcb26980472912968e4f.tar.bz2
linux-yocto-f0a085e99ff77b741130bcb26980472912968e4f.zip
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ] There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Tested on an actual Geode processor. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: luto@kernel.org Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-rw-r--r--arch/x86/kernel/cpu/cyrix.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index d12226f60168..1d9b8aaea06c 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -124,7 +124,7 @@ static void set_cx86_reorder(void)
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
@@ -135,11 +135,11 @@ static void set_cx86_memwb(void)
pr_info("Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
}
/*
@@ -153,14 +153,14 @@ static void geode_configure(void)
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
+ setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
@@ -296,7 +296,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
@@ -319,7 +319,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
} else {
/* A 6x86MX - it has the bug. */
set_cpu_bug(c, X86_BUG_COMA);