aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>2021-06-25 15:14:56 +1200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2021-07-28 11:13:50 +0200
commit51fc12f4d37622fa0c481604833f98f11b1cac4f (patch)
treed51b848aacd56cf59eb40de2ffbbf1748b83b63e
parent0b515af95790b625d121f5799897d50f939e7b13 (diff)
downloadlinux-yocto-51fc12f4d37622fa0c481604833f98f11b1cac4f.tar.gz
linux-yocto-51fc12f4d37622fa0c481604833f98f11b1cac4f.tar.bz2
linux-yocto-51fc12f4d37622fa0c481604833f98f11b1cac4f.zip
usb: max-3421: Prevent corruption of freed memory
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream. The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/usb/host/max3421-hcd.c44
1 files changed, 14 insertions, 30 deletions
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index c9acc59f4add..16efe37b7558 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -153,8 +153,6 @@ struct max3421_hcd {
*/
struct urb *curr_urb;
enum scheduling_pass sched_pass;
- struct usb_device *loaded_dev; /* dev that's loaded into the chip */
- int loaded_epnum; /* epnum whose toggles are loaded */
int urb_done; /* > 0 -> no errors, < 0: errno */
size_t curr_len;
u8 hien;
@@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev)
* Caller must NOT hold HCD spinlock.
*/
static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
- int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
{
- struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
- int old_epnum, same_ep, rcvtog, sndtog;
- struct usb_device *old_dev;
+ int rcvtog, sndtog;
u8 hctl;
- old_dev = max3421_hcd->loaded_dev;
- old_epnum = max3421_hcd->loaded_epnum;
-
- same_ep = (dev == old_dev && epnum == old_epnum);
- if (same_ep && !force_toggles)
- return;
-
- if (old_dev && !same_ep) {
- /* save the old end-points toggles: */
- u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
- rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
- sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
- /* no locking: HCD (i.e., we) own toggles, don't we? */
- usb_settoggle(old_dev, old_epnum, 0, rcvtog);
- usb_settoggle(old_dev, old_epnum, 1, sndtog);
- }
/* setup new endpoint's toggle bits: */
rcvtog = usb_gettoggle(dev, epnum, 0);
sndtog = usb_gettoggle(dev, epnum, 1);
hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
- max3421_hcd->loaded_epnum = epnum;
spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
/*
@@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
* address-assignment so it's best to just always load the
* address whenever the end-point changed/was forced.
*/
- max3421_hcd->loaded_dev = dev;
spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
}
@@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd)
struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
struct urb *urb, *curr_urb = NULL;
struct max3421_ep *max3421_ep;
- int epnum, force_toggles = 0;
+ int epnum;
struct usb_host_endpoint *ep;
struct list_head *pos;
unsigned long flags;
@@ -777,7 +752,6 @@ done:
usb_settoggle(urb->dev, epnum, 0, 1);
usb_settoggle(urb->dev, epnum, 1, 1);
max3421_ep->pkt_state = PKT_STATE_SETUP;
- force_toggles = 1;
} else
max3421_ep->pkt_state = PKT_STATE_TRANSFER;
}
@@ -785,7 +759,7 @@ done:
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
max3421_ep->last_active = max3421_hcd->frame_number;
- max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+ max3421_set_address(hcd, urb->dev, epnum);
max3421_set_speed(hcd, urb->dev);
max3421_next_transfer(hcd, 0);
return 1;
@@ -1380,6 +1354,16 @@ max3421_urb_done(struct usb_hcd *hcd)
status = 0;
urb = max3421_hcd->curr_urb;
if (urb) {
+ /* save the old end-points toggles: */
+ u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+ int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+ int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+ int epnum = usb_endpoint_num(&urb->ep->desc);
+
+ /* no locking: HCD (i.e., we) own toggles, don't we? */
+ usb_settoggle(urb->dev, epnum, 0, rcvtog);
+ usb_settoggle(urb->dev, epnum, 1, sndtog);
+
max3421_hcd->curr_urb = NULL;
spin_lock_irqsave(&max3421_hcd->lock, flags);
usb_hcd_unlink_urb_from_ep(hcd, urb);