aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2020-04-03 15:27:16 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-04-29 16:31:26 +0200
commit5d42466b626361e569f390c51c5063fa2a06e192 (patch)
tree3c7ff6b7f026625c61d31d8b43e941d94319e7f7
parent9bb4af3663df5dcae7a15f6bca32024a4b3377f2 (diff)
downloadlinux-yocto-5d42466b626361e569f390c51c5063fa2a06e192.tar.gz
linux-yocto-5d42466b626361e569f390c51c5063fa2a06e192.tar.bz2
linux-yocto-5d42466b626361e569f390c51c5063fa2a06e192.zip
iio: xilinx-xadc: Make sure not exceed maximum samplerate
commit 3b7f9dbb827ce8680b98490215e698b6079a9ec5 upstream. The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware does not have a FIFO, which means it generates an interrupt for each conversion sequence. At one 1MSPS this creates an interrupt storm that causes the system to soft-lock. For this reason the driver limits the maximum samplerate to 150kSPS. Currently this check is only done when setting a new samplerate. But it is also possible that the initial samplerate configured in the FPGA bitstream exceeds the limit. In this case when starting to capture data without first changing the samplerate the system can overload. To prevent this check the currently configured samplerate in the probe function and reduce it to the maximum if necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c78
1 files changed, 60 insertions, 18 deletions
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 99e76c62427e..1b0046cc717b 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -103,6 +103,16 @@ static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
#define XADC_FLAGS_BUFFERED BIT(0)
+/*
+ * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
+ * not have a hardware FIFO. Which means an interrupt is generated for each
+ * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
+ * overloaded by the interrupts that it soft-lockups. For this reason the driver
+ * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
+ * but still responsive.
+ */
+#define XADC_MAX_SAMPLERATE 150000
+
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
@@ -835,11 +845,27 @@ static const struct iio_buffer_setup_ops xadc_buffer_ops = {
.postdisable = &xadc_postdisable,
};
+static int xadc_read_samplerate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ return xadc_get_dclk_rate(xadc) / div / 26;
+}
+
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
- unsigned int div;
uint16_t val16;
int ret;
@@ -892,41 +918,31 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
- if (ret)
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
return ret;
- div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
- if (div < 2)
- div = 2;
-
- *val = xadc_get_dclk_rate(xadc) / div / 26;
-
+ *val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
-static int xadc_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long info)
+static int xadc_write_samplerate(struct xadc *xadc, int val)
{
- struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
-
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
- if (val > 150000)
- val = 150000;
+ if (val > XADC_MAX_SAMPLERATE)
+ val = XADC_MAX_SAMPLERATE;
val *= 26;
@@ -939,7 +955,7 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
* limit.
*/
div = clk_rate / val;
- if (clk_rate / div / 26 > 150000)
+ if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
@@ -950,6 +966,17 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
div << XADC_CONF2_DIV_OFFSET);
}
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return xadc_write_samplerate(xadc, val);
+}
+
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -1237,6 +1264,21 @@ static int xadc_probe(struct platform_device *pdev)
if (ret)
goto err_free_samplerate_trigger;
+ /*
+ * Make sure not to exceed the maximum samplerate since otherwise the
+ * resulting interrupt storm will soft-lock the system.
+ */
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ if (ret > XADC_MAX_SAMPLERATE) {
+ ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ }
+ }
+
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)