summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-04-12Linux 2.6.34-rc4v2.6.34-rc4Linus Torvalds
2010-04-12Merge branch 'anonvma'Linus Torvalds
* anonvma: anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma anon_vma: clone the anon_vma chain in the right order vma_adjust: fix the copying of anon_vma chains Simplify and comment on anon_vma re-use for anon_vma_prepare()
2010-04-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock ARM: 6031/1: fix Thumb-2 decompressor ARM: 6029/1: ep93xx: gpio.c: local functions should be static ARM: 6028/1: ARM: add MAINTAINERS for U300 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c MXC: mach_armadillo5x0: Add USB Host support. ARM mach-mx3: duplicated include ARM mach-mx3: duplicated include imx31: add watchdog device on litekit board. imx3: Add watchdog platform device support MXC: mach-mx31_3ds: add support for freescale mc13783 power management device. MXC: mach-mx31_3ds: Add SPI1 device support. MXC: mach-mx31_3ds: Add support for on board NAND Flash. MXC: mach-mx31_3ds: Update variable names over recent mach name modification. imx31: fix parent clock for rtc i.MX51: remove NFC AXI static mapping i.MX51: determine silicon revision dynamically i.MX51: map TZIC dynamically i.MX51: Use correct clock for gpt ...
2010-04-12Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: make sure the chunk allocator doesn't create zero length chunks Btrfs: fix data enospc check overflow
2010-04-12Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix possible dq_flags corruption quota: Hide warnings about writes to the filesystem before quota was turned on ext3: symlink must be handled via filesystem specific operation ext2: symlink must be handled via filesystem specific operation
2010-04-12Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: add speciffic ->setattr callback udf: potential integer overflow
2010-04-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits) MIPS: Calculate proper ebase value for 64-bit kernels MIPS: Alchemy: DB1200: Remove custom wait implementation MIPS: Big Sur: Make defconfig more useful. MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules MIPS: Sibyte: Fix M3 TLB exception handler workaround. MIPS: BCM63xx: Fix build failure in board_bcm963xx.c MIPS: uasm: Add OR instruction. MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions. MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot. MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback MIPS: BCM63xx: Fix typo in cpu-feature-overrides file. MIPS: BCM63xx: Add support for second uart. MIPS: BCM63xx: Fix double gpio registration. MIPS: BCM63xx: Add DWVS0 board MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards. MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count MIPS: libgcc.h: Checkpatch cleanup MIPS: Loongson-2F: Flush the branch target history in BTB and RAS MIPS: Move signal trampolines off of the stack. MIPS: Preliminary VDSO ...
2010-04-12Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
2010-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix typo "numer" -> "number" in alloc.c nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v() nilfs2: fix a wrong type conversion in nilfs_ioctl()
2010-04-12anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvmaLinus Torvalds
Otherwise we might be mapping in a page in a new mapping, but that page (through the swapcache) would later be mapped into an old mapping too. The page->mapping must be the case that works for everybody, not just the mapping that happened to page it in first. Here's the scenario: - page gets allocated/mapped by process A. Let's call the anon_vma we associate the page with 'A' to keep it easy to track. - Process A forks, creating process B. The anon_vma in B is 'B', and has a chain that looks like 'B' -> 'A'. Everything is fine. - Swapping happens. The page (with mapping pointing to 'A') gets swapped out (perhaps not to disk - it's enough to assume that it's just not mapped any more, and lives entirely in the swap-cache) - Process B pages it in, which goes like this: do_swap_page -> page = lookup_swap_cache(entry); ... set_pte_at(mm, address, page_table, pte); page_add_anon_rmap(page, vma, address); And think about what happens here! In particular, what happens is that this will now be the "first" mapping of that page, so page_add_anon_rmap() used to do if (first) __page_set_anon_rmap(page, vma, address); and notice what anon_vma it will use? It will use the anon_vma for process B! What happens then? Trivial: process 'A' also pages it in (nothing happens, it's not the first mapping), and then process 'B' execve's or exits or unmaps, making anon_vma B go away. End result: process A has a page that points to anon_vma B, but anon_vma B does not exist any more. This can go on forever. Forget about RCU grace periods, forget about locking, forget anything like that. The bug is simply that page->mapping points to an anon_vma that was correct at one point, but was _not_ the one that was shared by all users of that possible mapping. Changing it to always use the deepest anon_vma in the anonvma chain gets us to the safest model. This can be improved in certain cases: if we know the page is private to just this particular mapping (for example, it's a new page, or it is the only swapcache entry), we could pick the top (most specific) anon_vma. But that's a future optimization. Make it _work_ reliably first. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12anon_vma: clone the anon_vma chain in the right orderLinus Torvalds
We want to walk the chain in reverse order when cloning it, so that the order of the result chain will be the same as the order in the source chain. When we add entries to the chain, they go at the head of the chain, so we want to add the source head last. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "No, it still oopses" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12vma_adjust: fix the copying of anon_vma chainsLinus Torvalds
When we move the boundaries between two vma's due to things like mprotect, we need to make sure that the anon_vma of the pages that got moved from one vma to another gets properly copied around. And that was not always the case, in this rather hard-to-follow code sequence. Clarify the code, and fix it so that it copies the anon_vma from the right source. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "Yeah, not so much this one either" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12Simplify and comment on anon_vma re-use for anon_vma_prepare()Linus Torvalds
This changes the anon_vma reuse case to require that we only reuse simple anon_vma's - ie the case when the vma only has a single anon_vma associated with it. This means that a reuse of an anon_vma from an adjacent vma will always guarantee that both vma's are associated not only with the same anon_vma, they will also have the same anon_vma chain (of just a single entry in this case). And since anon_vma re-use was the only case where the same anon_vma might be associated with different chains of anon_vma's, we now have the case that every vma that shares the same anon_vma will always also have the same chain. That makes it much easier to think about merging vma's that share the same anon_vma's: you can always just drop the other anon_vma chain in anon_vma_merge() since you know that they are always identical. This also splits up the function to validate the anon_vma re-use, and adds a lot of commentary about the possible races. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "That didn't fix it" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12quota: Fix possible dq_flags corruptionAndrew Perepechko
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and atomically for example in mark_dquot_dirty or clear_dquot_dirty. Hence a change done by an atomic operation can be overwritten by a change done by a non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk. Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12quota: Hide warnings about writes to the filesystem before quota was turned onJan Kara
For a root filesystem write to the filesystem before quota is turned on happens regularly and there's no way around it because of writes to syslog, /etc/mtab, and similar. So the warning is rather pointless for ordinary users. It's still useful during development so we just hide the warning behind __DQUOT_PARANOIA config option. Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12ext3: symlink must be handled via filesystem specific operationDmitry Monakhov
generic setattr implementation is no longer responsible for quota transfer so synlinks must be handled via ext3_setattr. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12ext2: symlink must be handled via filesystem specific operationDmitry Monakhov
generic setattr implementation is no longer responsible for quota transfer so synlinks must be handled via ext2_setattr. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12MIPS: Calculate proper ebase value for 64-bit kernelsDavid Daney
The ebase is relative to CKSEG0 not CAC_BASE. On a 32-bit kernel they are the same thing, for a 64-bit kernel they are not. It happens to kind of work on a 64-bit kernel as they both reference the same physical memory. However since the CPU uses the CKSEG0 base, determining if a J instruction will reach always gives the wrong result unless we use the same number the CPU uses. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Alchemy: DB1200: Remove custom wait implementationManuel Lauss
While playing with the out-of-tree MAE driver module, the system would panic after a while in the db1200 custom wait code after wakeup due to a clobbered k0 register being used as target address of a store op. Remove the custom wait implementation and revert back to the Alchemy- recommended implementation already set as default. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Big Sur: Make defconfig more useful.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modulesAnton Altaparmakov
Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp. 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) break non-GPL modules that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on MIPS. All those functions are EXPORT_SYMBOL() so are meant to be allowed to be used by non-GPL kernel modules. These calls all take page protection as an argument which is normally a constant like PAGE_KERNEL. This commit causes all protection constants like PAGE_KERNEL to not be constants and instead to contain the GPL-only symbol _page_cachable_default. This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL modules to fail to link with the complaint that they are trying to use the GPL-only symbol _page_cachable_default... Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: Chris Dearman <chris@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Sibyte: Fix M3 TLB exception handler workaround.Ralf Baechle
The M3 workaround needs to cmpare the region and VPN2 fields only. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Fix build failure in board_bcm963xx.cFlorian Fainelli
Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered in the board_prom_init callback, but it references variables and functions which are declared below. Move the variables and functions above board_prom_init. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1077/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: uasm: Add OR instruction.Ralf Baechle
This is needed for the fix of the M3 workaround. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.Ralf Baechle
Previously it was unconditionally used on all Sibyte family SOCs. The M3 bug has to be handled in the TLB exception handler which is extremly performance sensitive, so this modification is expected to deliver around 2-3% performance improvment. This is important as required changes to the M3 workaround will make it more costly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.Maxime Bizon
To avoid a glitch during GPIO initialisation read GPIO output register values left by the firmware. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/903/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callbackFlorian Fainelli
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> To: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1017/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.Maxime Bizon
Fix typo: CONFIG_BCMCPU_IS_63xx does not exist; CONFIG_BCM63XX_CPU_63xx is the valid config option. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> To: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Patchwork: http://patchwork.linux-mips.org/patch/901/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Add support for second uart.Maxime Bizon
The BCm63xx SOC has two uarts. Some boards use the second one for bluetooth. This patch changes platform device registration code to handle this. Changes to the UART driver were already merged in 6a2c7eabfd09ca7986bf96b8958a87ca041a19d8. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> To: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Patchwork: http://patchwork.linux-mips.org/patch/900/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Fix double gpio registration.Maxime Bizon
bcm63xx_gpio_init is already called from prom_init to allow board to use them early, so we can remove the unneeded arch_initcall. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> To: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Patchwork: http://patchwork.linux-mips.org/patch/899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Add DWVS0 boardFlorian Fainelli
The DWVS0 board is a BCM6358-based board with an on-board OHCI controler. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1015/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio countFlorian Fainelli
The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs available. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1016/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: libgcc.h: Checkpatch cleanupAndrea Gelmini
arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> To: linux-kernel@vger.kernel.org Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-mips@linux-mips.org Cc: linux-sh@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1007/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Loongson-2F: Flush the branch target history in BTB and RASWu Zhangjin
As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work around the Loongson 2F erratum we need to do: "When switching from user mode to kernel mode, you should flush the branch target history such as BTB and RAS." [1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211 [2] English version of chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Patchwork: http://patchwork.linux-mips.org/patch/1066/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Move signal trampolines off of the stack.David Daney
This is a follow on to the vdso patch. Since all processes now have signal trampolines permanently mapped, we can use those instead of putting the trampoline on the stack and invalidating the corresponding icache across all CPUs. We also get rid of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code. [Ralf: GDB 7.1 which has the necessary modifications to allow backtracing over signal frames will supposedly be released tomorrow. The old signal frame format obsoleted by this patch exists in two variations, for sane processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR. So there was never a GDB which did support backtracing over signal frames on all MIPS systems. This convinved me this series should be applied and pushed upstream as soon as possible.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/974/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Preliminary VDSODavid Daney
This is a preliminary patch to add a vdso to all user processes. Still missing are ELF headers and .eh_frame information. But it is enough to allow us to move signal trampolines off of the stack. Note that emulation of branch delay slots in the FPU emulator still requires the stack. We allocate a single page (the vdso) and write all possible signal trampolines into it. The stack is moved down by one page and the vdso is mapped into this space. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/975/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Add SYSCALL to uasm.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/976/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Fix SSB PCIcore IO resource managementAndreas Ferber
The SSB PCIcore code reused the IO resource fixup code from the original 2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack for doing PCI IO resource configuration back then (the boot loader doesn't configure PCI devices on this platform). However, this code is no longer necessary since the kernel now can do PCI resource management fine all by itself, so remove the old code. When removing the code, it becomes obvious that the mem_offset setting in the PCIcore driver was wrong, however this was masked by the fixup code before, except in a few cases involving yenta_socket. For BCM47xx, the correct offset is 0, and since this is the only device using PCIcore in host mode, the offset can simply be removed unconditionally. Signed-off-by: Andreas Ferber <af@chaos-agency.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Markus Wigge <markus@cultcom.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSETFlorian Fainelli
On AR7, we already redefine PHYS_OFFSET to match the system specifities, it is however not sufficient when unsing dma_{map,unmap}_single, specifically in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA to work correctly. This patch fixes the following issue, seen in cpmac_open: ops[#1]: Cpu 0 $ 0 : 00000000 10008400 a0f5b120 00000000 $ 4 : 94c59000 94270f64 00000020 00000010 $ 8 : 00000010 94103ce0 0000000a 94c03400 $12 : ffffffff 94c03408 94c03410 00000001 $16 : a0f5ba20 00000041 94c592c0 94c59200 $20 : 94c59000 000005ee 00002000 9438c8f0 $24 : 00000010 00000000 $28 : 94fac000 94fadd58 94390000 942724a8 Hi : 00000000 Lo : 00000001 epc : 94272518 cpmac_open+0x208/0x3f8 Not tainted ra : 942724a8 cpmac_open+0x198/0x3f8 Status: 10008403 KERNEL EXL IE Cause : 3080000c BadVA : 00000000 PrId : 00018448 (MIPS 4KEc) Modules linked in: Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000) Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0 94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4 00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043 00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8 7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913 ... Call Trace: [<94272518>] cpmac_open+0x208/0x3f8 [<9428e5a4>] dev_open+0x164/0x264 [<9428d810>] dev_change_flags+0xd0/0x1bc [<942f7f2c>] devinet_ioctl+0x2d8/0x908 [<942771f8>] sock_ioctl+0x29c/0x2fc [<941a0fb4>] vfs_ioctl+0x2c/0x7c [<941a16ec>] do_vfs_ioctl+0x5dc/0x630 [<941a1790>] sys_ioctl+0x50/0x88 [<94101e10>] stack_done+0x20/0x3c Signed-off-by: peter fuerst <post@pfrst.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: AR7: Fix phat finger of cpmac fixed_phy_addAlexander Clouter
Seems I trimmed one too many lines in 29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp 7084338eb8eb0cc021ba86c340157bad397f3f0b (kernel.org) which led to no functioning Ethernet on my WAG54Gv2. This patch restores the AWOL line. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1065/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: AR7: Fix phat finger of reset bit in vlynq_high_dataAlexander Clouter
Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3 (lmo) rsp. 8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7 to no longer get as far as init. Fixed my phat fingering. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1064/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Loongson: Add module info to the loongson2_clock driverWu Zhangjin
This patch fixes a kernel warning when loading the the loongson2_clock driver: "Feb 25 23:42:27 localhost kernel: [ 4.965000] loongson2_clock: module license 'unspecified' taints kernel." Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Reported-by: Liu Shiwei <liushiwei@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Lemote 2F: Ensure atomic execution of _rdmsr and _wrmsrWu Zhangjin
On Lemote 2F CS5536 MSRs are accessed through a index / data register pair. The access sequence must be protected by a spinlock to be atomic. Without this rebooting in fs2f_reboot() may fail. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1058/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1008/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Fix elfcore.c build warningRalf Baechle
kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>. In <asm/elf.h>, struct pt_regs is declared inside the parameter list of the elf_dump_regs function which causes a kernel build warning. Fixed by adding a forward declaration of struct pt_regs. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Octeon: Remove redundant declaration of octeon_reserve32_memoryYang Shi
octeon_reserve32_memory is defined In Octeon's setup.c, so remove the redundant extern declaration of this variable. Signed-off-by: Yang Shi <yang.shi@windriver.com> To: f.fainelli@gmail.com Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1022/ Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Trace: Don't trace irqsoff for the idle processWu Zhangjin
Like x86 did in arch/x86/kernel/{process_32.c,process_64.c}, also don't trace irqsoff for idle. If there's no useful work to be done, we don't care about the irqsoff duration. If we trace the idle process, the max duration of irqsoff will be the idle time and make the irqsoff tracer useless. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Patchwork: http://patchwork.linux-mips.org/patch/1044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: delay: Fix use of current_cpu_data in preemptable code.Ralf Baechle
This may lead to warnings like: BUG: using smp_processor_id() in preemptible [00000000] code: reboot/1989 caller is __udelay+0x14/0x70 Call Trace: [<ffffffff8110ad28>] dump_stack+0x8/0x34 [<ffffffff812dde04>] debug_smp_processor_id+0xf4/0x110 [<ffffffff812d90bc>] __udelay+0x14/0x70 [<ffffffff81378274>] md_notify_reboot+0x12c/0x148 [<ffffffff81161054>] notifier_call_chain+0x64/0xc8 [<ffffffff811614dc>] __blocking_notifier_call_chain+0x64/0xc0 [<ffffffff8115566c>] kernel_restart_prepare+0x1c/0x38 [<ffffffff811556cc>] kernel_restart+0x14/0x50 [<ffffffff8115581c>] SyS_reboot+0x10c/0x1f0 [<ffffffff81103684>] handle_sysn32+0x44/0x84 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: Octeon: Remove #if 0 code.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1029/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>