diff options
Diffstat (limited to 'drivers/char/istallion.c')
| -rw-r--r-- | drivers/char/istallion.c | 185 |
1 files changed, 64 insertions, 121 deletions
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 402838f4083e..4cd6c527ee41 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -213,7 +213,6 @@ static int stli_shared; * with the slave. Most of them need to be updated atomically, so always * use the bit setting operations (unless protected by cli/sti). */ -#define ST_INITIALIZING 1 #define ST_OPENING 2 #define ST_CLOSING 3 #define ST_CMDING 4 @@ -621,7 +620,7 @@ static int stli_brdinit(struct stlibrd *brdp); static int stli_startbrd(struct stlibrd *brdp); static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); static void stli_poll(unsigned long arg); static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); @@ -704,7 +703,7 @@ static const struct file_operations stli_fsiomem = { .owner = THIS_MODULE, .read = stli_memread, .write = stli_memwrite, - .ioctl = stli_memioctl, + .unlocked_ioctl = stli_memioctl, }; /*****************************************************************************/ @@ -783,13 +782,32 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) /*****************************************************************************/ +/* + * On the first open of the device setup the port hardware, and + * initialize the per port data structure. Since initializing the port + * requires several commands to the board we will need to wait for any + * other open that is already initializing the port. + * + * Locking: protected by the port mutex. + */ + +static int stli_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + int rc; + + if ((rc = stli_initopen(tty, brdp, portp)) >= 0) + clear_bit(TTY_IO_ERROR, &tty->flags); + wake_up_interruptible(&portp->raw_wait); + return rc; +} + static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; - struct tty_port *port; unsigned int minordev, brdnr, portnr; - int rc; minordev = tty->index; brdnr = MINOR2BRD(minordev); @@ -809,95 +827,56 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - port = &portp->port; - -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. Since initializing the port - * requires several commands to the board we will need to wait for any - * other open that is already initializing the port. - * - * Review - locking - */ - tty_port_tty_set(port, tty); - tty->driver_data = portp; - port->count++; - - wait_event_interruptible(portp->raw_wait, - !test_bit(ST_INITIALIZING, &portp->state)); - if (signal_pending(current)) - return -ERESTARTSYS; - - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { - set_bit(ST_INITIALIZING, &portp->state); - if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - /* Locking */ - port->flags |= ASYNC_INITIALIZED; - clear_bit(TTY_IO_ERROR, &tty->flags); - } - clear_bit(ST_INITIALIZING, &portp->state); - wake_up_interruptible(&portp->raw_wait); - if (rc < 0) - return rc; - } - return tty_port_block_til_ready(&portp->port, tty, filp); + return tty_port_open(&portp->port, tty, filp); } + /*****************************************************************************/ -static void stli_close(struct tty_struct *tty, struct file *filp) +static void stli_shutdown(struct tty_port *port) { struct stlibrd *brdp; - struct stliport *portp; - struct tty_port *port; + unsigned long ftype; unsigned long flags; + struct stliport *portp = container_of(port, struct stliport, port); - portp = tty->driver_data; - if (portp == NULL) + if (portp->brdnr >= stli_nrbrds) return; - port = &portp->port; - - if (tty_port_close_start(port, tty, filp) == 0) + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) return; -/* - * May want to wait for data to drain before closing. The BUSY flag - * keeps track of whether we are still transmitting or not. It is - * updated by messages from the slave - indicating when all chars - * really have drained. - */ - spin_lock_irqsave(&stli_lock, flags); - if (tty == stli_txcooktty) - stli_flushchars(tty); - spin_unlock_irqrestore(&stli_lock, flags); - - /* We end up doing this twice for the moment. This needs looking at - eventually. Note we still use portp->closing_wait as a result */ - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); + /* + * May want to wait for data to drain before closing. The BUSY + * flag keeps track of whether we are still transmitting or not. + * It is updated by messages from the slave - indicating when all + * chars really have drained. + */ - /* FIXME: port locking here needs attending to */ - port->flags &= ~ASYNC_INITIALIZED; + if (!test_bit(ST_CLOSING, &portp->state)) + stli_rawclose(brdp, portp, 0, 0); - brdp = stli_brds[portp->brdnr]; - stli_rawclose(brdp, portp, 0, 0); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) - set_bit(ST_DOSIGS, &portp->state); - else - stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0); - } + spin_lock_irqsave(&stli_lock, flags); clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - set_bit(ST_DOFLUSHRX, &portp->state); - stli_flushbuffer(tty); + spin_unlock_irqrestore(&stli_lock, flags); - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); + ftype = FLUSHTX | FLUSHRX; + stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); +} + +static void stli_close(struct tty_struct *tty, struct file *filp) +{ + struct stliport *portp = tty->driver_data; + unsigned long flags; + if (portp == NULL) + return; + spin_lock_irqsave(&stli_lock, flags); + /* Flush any internal buffering out first */ + if (tty == stli_txcooktty) + stli_flushchars(tty); + spin_unlock_irqrestore(&stli_lock, flags); + tty_port_close(&portp->port, tty, filp); } /*****************************************************************************/ @@ -1724,6 +1703,7 @@ static void stli_start(struct tty_struct *tty) /*****************************************************************************/ + /* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the @@ -1733,47 +1713,8 @@ static void stli_start(struct tty_struct *tty) static void stli_hangup(struct tty_struct *tty) { - struct stliport *portp; - struct stlibrd *brdp; - struct tty_port *port; - unsigned long flags; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - port = &portp->port; - - spin_lock_irqsave(&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - if (!test_bit(ST_CLOSING, &portp->state)) - stli_rawclose(brdp, portp, 0, 0); - - spin_lock_irqsave(&stli_lock, flags); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) { - set_bit(ST_DOSIGS, &portp->state); - set_bit(ST_DOFLUSHTX, &portp->state); - set_bit(ST_DOFLUSHRX, &portp->state); - } else { - stli_sendcmd(brdp, portp, A_SETSIGNALSF, - &portp->asig, sizeof(asysigs_t), 0); - } - } - - clear_bit(ST_TXBUSY, &portp->state); - clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - spin_unlock_irqrestore(&stli_lock, flags); - - tty_port_hangup(port); + struct stliport *portp = tty->driver_data; + tty_port_hangup(&portp->port); } /*****************************************************************************/ @@ -4311,7 +4252,7 @@ static int stli_getbrdstruct(struct stlibrd __user *arg) * reset it, and start/stop it. */ -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) { struct stlibrd *brdp; int brdnr, rc, done; @@ -4356,7 +4297,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un * Now handle the board specific ioctls. These all depend on the * minor number of the device they were called from. */ - brdnr = iminor(ip); + brdnr = iminor(fp->f_dentry->d_inode); if (brdnr >= STL_MAXBRDS) return -ENODEV; brdp = stli_brds[brdnr]; @@ -4420,6 +4361,8 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, .dtr_rts = stli_dtr_rts, + .activate = stli_activate, + .shutdown = stli_shutdown, }; /*****************************************************************************/ |