summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf537/include/mach/defBF534.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf537/include/mach/defBF534.h')
-rw-r--r--arch/blackfin/mach-bf537/include/mach/defBF534.h95
1 files changed, 0 insertions, 95 deletions
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a6d20ca57683..066d5c261f47 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -958,67 +958,6 @@
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* PLL Not Powered */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Enter Deep Sleep Mode */
-#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
-#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
-#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
-#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
-#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
@@ -1645,34 +1584,6 @@
#define BGSTAT 0x0020 /* Bus Grant Status */
/* ************************** DMA CONTROLLER MASKS ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* DMA Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
-#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
-#define RESTART 0x0020 /* DMA Buffer Clear */
-#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
@@ -1690,12 +1601,6 @@
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
-#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
-
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */